All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 5.11 01/67] ath10k: prevent deinitializing NAPI twice
@ 2021-02-24 12:49 ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Wen Gong, Kalle Valo, Sasha Levin, ath10k, linux-wireless, netdev

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit e2f8b74e58cb1560c1399ba94a470b770e858259 ]

It happened "Kernel panic - not syncing: hung_task: blocked tasks" when
test simulate crash and ifconfig down/rmmod meanwhile.

Test steps:

1.Test commands, either can reproduce the hang for PCIe, SDIO and SNOC.
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;sleep 0.05;ifconfig wlan0 down
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_sdio
echo hw-restart > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_pci

2. dmesg:
[ 5622.548630] ath10k_sdio mmc1:0001:1: simulating soft firmware crash
[ 5622.655995] ieee80211 phy0: Hardware restart was requested
[ 5776.355164] INFO: task shill:1572 blocked for more than 122 seconds.
[ 5776.355687] INFO: task kworker/1:2:24437 blocked for more than 122 seconds.
[ 5776.359812] Kernel panic - not syncing: hung_task: blocked tasks
[ 5776.359836] CPU: 1 PID: 55 Comm: khungtaskd Tainted: G        W         4.19.86 #137
[ 5776.359846] Hardware name: MediaTek krane sku176 board (DT)
[ 5776.359855] Call trace:
[ 5776.359868]  dump_backtrace+0x0/0x170
[ 5776.359881]  show_stack+0x20/0x2c
[ 5776.359896]  dump_stack+0xd4/0x10c
[ 5776.359916]  panic+0x12c/0x29c
[ 5776.359937]  hung_task_panic+0x0/0x50
[ 5776.359953]  kthread+0x120/0x130
[ 5776.359965]  ret_from_fork+0x10/0x18
[ 5776.359986] SMP: stopping secondary CPUs
[ 5776.360012] Kernel Offset: 0x141ea00000 from 0xffffff8008000000
[ 5776.360026] CPU features: 0x0,2188200c
[ 5776.360035] Memory Limit: none

command "ifconfig wlan0 down" or "rmmod ath10k_sdio" will be blocked
callstack of ifconfig:
[<0>] __switch_to+0x120/0x13c
[<0>] msleep+0x28/0x38
[<0>] ath10k_sdio_hif_stop+0x24c/0x294 [ath10k_sdio]
[<0>] ath10k_core_stop+0x50/0x78 [ath10k_core]
[<0>] ath10k_halt+0x120/0x178 [ath10k_core]
[<0>] ath10k_stop+0x4c/0x8c [ath10k_core]
[<0>] drv_stop+0xe0/0x1e4 [mac80211]
[<0>] ieee80211_stop_device+0x48/0x54 [mac80211]
[<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211]
[<0>] ieee80211_stop+0x20/0x30 [mac80211]
[<0>] __dev_close_many+0xb8/0x11c
[<0>] __dev_change_flags+0xe0/0x1d0
[<0>] dev_change_flags+0x30/0x6c
[<0>] devinet_ioctl+0x370/0x564
[<0>] inet_ioctl+0xdc/0x304
[<0>] sock_do_ioctl+0x50/0x288
[<0>] compat_sock_ioctl+0x1b4/0x1aac
[<0>] __se_compat_sys_ioctl+0x100/0x26fc
[<0>] __arm64_compat_sys_ioctl+0x20/0x2c
[<0>] el0_svc_common+0xa4/0x154
[<0>] el0_svc_compat_handler+0x2c/0x38
[<0>] el0_svc_compat+0x8/0x18
[<0>] 0xffffffffffffffff

callstack of rmmod:
[<0>] __switch_to+0x120/0x13c
[<0>] msleep+0x28/0x38
[<0>] ath10k_sdio_hif_stop+0x294/0x31c [ath10k_sdio]
[<0>] ath10k_core_stop+0x50/0x78 [ath10k_core]
[<0>] ath10k_halt+0x120/0x178 [ath10k_core]
[<0>] ath10k_stop+0x4c/0x8c [ath10k_core]
[<0>] drv_stop+0xe0/0x1e4 [mac80211]
[<0>] ieee80211_stop_device+0x48/0x54 [mac80211]
[<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211]
[<0>] ieee80211_stop+0x20/0x30 [mac80211]
[<0>] __dev_close_many+0xb8/0x11c
[<0>] dev_close_many+0x70/0x100
[<0>] dev_close+0x4c/0x80
[<0>] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211]
[<0>] ieee80211_remove_interfaces+0x58/0x1a0 [mac80211]
[<0>] ieee80211_unregister_hw+0x40/0x100 [mac80211]
[<0>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core]
[<0>] ath10k_core_unregister+0x38/0x7c [ath10k_core]
[<0>] ath10k_sdio_remove+0x8c/0xd0 [ath10k_sdio]
[<0>] sdio_bus_remove+0x48/0x108
[<0>] device_release_driver_internal+0x138/0x1ec
[<0>] driver_detach+0x6c/0xa8
[<0>] bus_remove_driver+0x78/0xa8
[<0>] driver_unregister+0x30/0x50
[<0>] sdio_unregister_driver+0x28/0x34
[<0>] cleanup_module+0x14/0x6bc [ath10k_sdio]
[<0>] __arm64_sys_delete_module+0x1e0/0x22c
[<0>] el0_svc_common+0xa4/0x154
[<0>] el0_svc_compat_handler+0x2c/0x38
[<0>] el0_svc_compat+0x8/0x18
[<0>] 0xffffffffffffffff

SNOC:
[  647.156863] Call trace:
[  647.162166] [<ffffff80080855a4>] __switch_to+0x120/0x13c
[  647.164512] [<ffffff800899d8b8>] __schedule+0x5ec/0x798
[  647.170062] [<ffffff800899dad8>] schedule+0x74/0x94
[  647.175050] [<ffffff80089a0848>] schedule_timeout+0x314/0x42c
[  647.179874] [<ffffff80089a0a14>] schedule_timeout_uninterruptible+0x34/0x40
[  647.185780] [<ffffff80082a494>] msleep+0x28/0x38
[  647.192546] [<ffffff800117ec4c>] ath10k_snoc_hif_stop+0x4c/0x1e0 [ath10k_snoc]
[  647.197439] [<ffffff80010dfbd8>] ath10k_core_stop+0x50/0x7c [ath10k_core]
[  647.204652] [<ffffff80010c8f48>] ath10k_halt+0x114/0x16c [ath10k_core]
[  647.211420] [<ffffff80010cad68>] ath10k_stop+0x4c/0x88 [ath10k_core]
[  647.217865] [<ffffff8000fdbf54>] drv_stop+0x110/0x244 [mac80211]
[  647.224367] [<ffffff80010147ac>] ieee80211_stop_device+0x48/0x54 [mac80211]
[  647.230359] [<ffffff8000ff3eec>] ieee80211_do_stop+0x6a4/0x73c [mac80211]
[  647.237033] [<ffffff8000ff4500>] ieee80211_stop+0x20/0x30 [mac80211]
[  647.243942] [<ffffff80087e39b8>] __dev_close_many+0xa0/0xfc
[  647.250435] [<ffffff80087e3888>] dev_close_many+0x70/0x100
[  647.255651] [<ffffff80087e3a60>] dev_close+0x4c/0x80
[  647.261244] [<ffffff8000f1ba54>] cfg80211_shutdown_all_interfaces+0x44/0xcc [cfg80211]
[  647.266383] [<ffffff8000ff3fdc>] ieee80211_remove_interfaces+0x58/0x1b4 [mac80211]
[  647.274128] [<ffffff8000fda540>] ieee80211_unregister_hw+0x50/0x120 [mac80211]
[  647.281659] [<ffffff80010ca314>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core]
[  647.288839] [<ffffff80010dfc94>] ath10k_core_unregister+0x48/0x90 [ath10k_core]
[  647.296027] [<ffffff800117e598>] ath10k_snoc_remove+0x5c/0x150 [ath10k_snoc]
[  647.303229] [<ffffff80085625fc>] platform_drv_remove+0x28/0x50
[  647.310517] [<ffffff80085601a4>] device_release_driver_internal+0x114/0x1b8
[  647.316257] [<ffffff80085602e4>] driver_detach+0x6c/0xa8
[  647.323021] [<ffffff800855e5b8>] bus_remove_driver+0x78/0xa8
[  647.328571] [<ffffff800856107c>] driver_unregister+0x30/0x50
[  647.334213] [<ffffff8008562674>] platform_driver_unregister+0x1c/0x28
[  647.339876] [<ffffff800117fefc>] cleanup_module+0x1c/0x120 [ath10k_snoc]
[  647.346196] [<ffffff8008143ab8>] SyS_delete_module+0x1dc/0x22c

PCIe:
[  615.392770] rmmod           D    0  3523   3458 0x00000080
[  615.392777] Call Trace:
[  615.392784]  __schedule+0x617/0x7d3
[  615.392791]  ? __mod_timer+0x263/0x35c
[  615.392797]  schedule+0x62/0x72
[  615.392803]  schedule_timeout+0x8d/0xf3
[  615.392809]  ? run_local_timers+0x6b/0x6b
[  615.392814]  msleep+0x1b/0x22
[  615.392824]  ath10k_pci_hif_stop+0x68/0xd6 [ath10k_pci]
[  615.392844]  ath10k_core_stop+0x44/0x67 [ath10k_core]
[  615.392859]  ath10k_halt+0x102/0x153 [ath10k_core]
[  615.392873]  ath10k_stop+0x38/0x75 [ath10k_core]
[  615.392893]  drv_stop+0x9a/0x13c [mac80211]
[  615.392915]  ieee80211_do_stop+0x772/0x7cd [mac80211]
[  615.392937]  ieee80211_stop+0x1a/0x1e [mac80211]
[  615.392945]  __dev_close_many+0x9e/0xf0
[  615.392952]  dev_close_many+0x62/0xe8
[  615.392958]  dev_close+0x54/0x7d
[  615.392975]  cfg80211_shutdown_all_interfaces+0x6e/0xa5 [cfg80211]
[  615.393021]  ieee80211_remove_interfaces+0x52/0x1aa [mac80211]
[  615.393049]  ieee80211_unregister_hw+0x54/0x136 [mac80211]
[  615.393068]  ath10k_mac_unregister+0x19/0x4a [ath10k_core]
[  615.393091]  ath10k_core_unregister+0x39/0x7e [ath10k_core]
[  615.393104]  ath10k_pci_remove+0x3d/0x7f [ath10k_pci]
[  615.393117]  pci_device_remove+0x41/0xa6
[  615.393129]  device_release_driver_internal+0x123/0x1ec
[  615.393140]  driver_detach+0x60/0x90
[  615.393152]  bus_remove_driver+0x72/0x9f
[  615.393164]  pci_unregister_driver+0x1e/0x87
[  615.393177]  SyS_delete_module+0x1d7/0x277
[  615.393188]  do_syscall_64+0x6b/0xf7
[  615.393199]  entry_SYSCALL_64_after_hwframe+0x41/0xa6

The test command run simulate_fw_crash firstly and it call into
ath10k_sdio_hif_stop from ath10k_core_restart, then napi_disable
is called and bit NAPI_STATE_SCHED is set. After that, function
ath10k_sdio_hif_stop is called again from ath10k_stop by command
"ifconfig wlan0 down" or "rmmod ath10k_sdio", then command blocked.

It is blocked by napi_synchronize, napi_disable will set bit with
NAPI_STATE_SCHED, and then napi_synchronize will enter dead loop
becuase bit NAPI_STATE_SCHED is set by napi_disable.

function of napi_synchronize
static inline void napi_synchronize(const struct napi_struct *n)
{
	if (IS_ENABLED(CONFIG_SMP))
		while (test_bit(NAPI_STATE_SCHED, &n->state))
			msleep(1);
	else
		barrier();
}

function of napi_disable
void napi_disable(struct napi_struct *n)
{
	might_sleep();
	set_bit(NAPI_STATE_DISABLE, &n->state);

	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
		msleep(1);
	while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
		msleep(1);

	hrtimer_cancel(&n->timer);

	clear_bit(NAPI_STATE_DISABLE, &n->state);
}

Add flag for it avoid the hang and crash.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Tested-on: WCN3990 hw1.0 SNOC hw1.0 WLAN.HL.3.1-01307.1-QCAHLSWMTPL-2

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1598617348-2325-1-git-send-email-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/ahb.c  |  5 ++---
 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/core.h |  5 +++++
 drivers/net/wireless/ath/ath10k/pci.c  |  7 ++++---
 drivers/net/wireless/ath/ath10k/sdio.c |  5 ++---
 drivers/net/wireless/ath/ath10k/snoc.c |  6 +++---
 6 files changed, 41 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 05a61975c83f4..869524852fbaa 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -626,7 +626,7 @@ static int ath10k_ahb_hif_start(struct ath10k *ar)
 {
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif start\n");
 
-	napi_enable(&ar->napi);
+	ath10k_core_napi_enable(ar);
 	ath10k_ce_enable_interrupts(ar);
 	ath10k_pci_enable_legacy_irq(ar);
 
@@ -644,8 +644,7 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar)
 	ath10k_ahb_irq_disable(ar);
 	synchronize_irq(ar_ahb->irq);
 
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+	ath10k_core_napi_sync_disable(ar);
 
 	ath10k_pci_flush(ar);
 }
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index eeb6ff6aa2e1e..a419ec7130f97 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2305,6 +2305,31 @@ void ath10k_core_start_recovery(struct ath10k *ar)
 }
 EXPORT_SYMBOL(ath10k_core_start_recovery);
 
+void ath10k_core_napi_enable(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags))
+		return;
+
+	napi_enable(&ar->napi);
+	set_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags);
+}
+EXPORT_SYMBOL(ath10k_core_napi_enable);
+
+void ath10k_core_napi_sync_disable(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags))
+		return;
+
+	napi_synchronize(&ar->napi);
+	napi_disable(&ar->napi);
+	clear_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags);
+}
+EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
+
 static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 51f7e960e2977..f4be6bfb25392 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -868,6 +868,9 @@ enum ath10k_dev_flags {
 
 	/* Indicates that ath10k device is during recovery process and not complete */
 	ATH10K_FLAG_RESTARTING,
+
+	/* protected by conf_mutex */
+	ATH10K_FLAG_NAPI_ENABLED,
 };
 
 enum ath10k_cal_mode {
@@ -1308,6 +1311,8 @@ static inline bool ath10k_peer_stats_enabled(struct ath10k *ar)
 
 extern unsigned long ath10k_coredump_mask;
 
+void ath10k_core_napi_sync_disable(struct ath10k *ar);
+void ath10k_core_napi_enable(struct ath10k *ar);
 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 				  enum ath10k_bus bus,
 				  enum ath10k_hw_rev hw_rev,
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2328df09875ce..e7fde635e0eef 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1958,7 +1958,7 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif start\n");
 
-	napi_enable(&ar->napi);
+	ath10k_core_napi_enable(ar);
 
 	ath10k_pci_irq_enable(ar);
 	ath10k_pci_rx_post(ar);
@@ -2075,8 +2075,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_pci_irq_disable(ar);
 	ath10k_pci_irq_sync(ar);
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+
+	ath10k_core_napi_sync_disable(ar);
+
 	cancel_work_sync(&ar_pci->dump_work);
 
 	/* Most likely the device has HTT Rx ring configured. The only way to
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index c415090d1f37c..b746052737e0b 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1859,7 +1859,7 @@ static int ath10k_sdio_hif_start(struct ath10k *ar)
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
 	int ret;
 
-	napi_enable(&ar->napi);
+	ath10k_core_napi_enable(ar);
 
 	/* Sleep 20 ms before HIF interrupts are disabled.
 	 * This will give target plenty of time to process the BMI done
@@ -1992,8 +1992,7 @@ static void ath10k_sdio_hif_stop(struct ath10k *ar)
 
 	spin_unlock_bh(&ar_sdio->wr_async_lock);
 
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+	ath10k_core_napi_sync_disable(ar);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index bf9a8cb713dc0..2c2df0b8b3fd9 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -915,8 +915,7 @@ static void ath10k_snoc_hif_stop(struct ath10k *ar)
 	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
 		ath10k_snoc_irq_disable(ar);
 
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+	ath10k_core_napi_sync_disable(ar);
 	ath10k_snoc_buffer_cleanup(ar);
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
 }
@@ -926,7 +925,8 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
 	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
 
 	bitmap_clear(ar_snoc->pending_ce_irqs, 0, CE_COUNT_MAX);
-	napi_enable(&ar->napi);
+
+	ath10k_core_napi_enable(ar);
 	ath10k_snoc_irq_enable(ar);
 	ath10k_snoc_rx_post(ar);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 01/67] ath10k: prevent deinitializing NAPI twice
@ 2021-02-24 12:49 ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, netdev, linux-wireless, ath10k, Wen Gong, Kalle Valo

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit e2f8b74e58cb1560c1399ba94a470b770e858259 ]

It happened "Kernel panic - not syncing: hung_task: blocked tasks" when
test simulate crash and ifconfig down/rmmod meanwhile.

Test steps:

1.Test commands, either can reproduce the hang for PCIe, SDIO and SNOC.
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;sleep 0.05;ifconfig wlan0 down
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_sdio
echo hw-restart > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_pci

2. dmesg:
[ 5622.548630] ath10k_sdio mmc1:0001:1: simulating soft firmware crash
[ 5622.655995] ieee80211 phy0: Hardware restart was requested
[ 5776.355164] INFO: task shill:1572 blocked for more than 122 seconds.
[ 5776.355687] INFO: task kworker/1:2:24437 blocked for more than 122 seconds.
[ 5776.359812] Kernel panic - not syncing: hung_task: blocked tasks
[ 5776.359836] CPU: 1 PID: 55 Comm: khungtaskd Tainted: G        W         4.19.86 #137
[ 5776.359846] Hardware name: MediaTek krane sku176 board (DT)
[ 5776.359855] Call trace:
[ 5776.359868]  dump_backtrace+0x0/0x170
[ 5776.359881]  show_stack+0x20/0x2c
[ 5776.359896]  dump_stack+0xd4/0x10c
[ 5776.359916]  panic+0x12c/0x29c
[ 5776.359937]  hung_task_panic+0x0/0x50
[ 5776.359953]  kthread+0x120/0x130
[ 5776.359965]  ret_from_fork+0x10/0x18
[ 5776.359986] SMP: stopping secondary CPUs
[ 5776.360012] Kernel Offset: 0x141ea00000 from 0xffffff8008000000
[ 5776.360026] CPU features: 0x0,2188200c
[ 5776.360035] Memory Limit: none

command "ifconfig wlan0 down" or "rmmod ath10k_sdio" will be blocked
callstack of ifconfig:
[<0>] __switch_to+0x120/0x13c
[<0>] msleep+0x28/0x38
[<0>] ath10k_sdio_hif_stop+0x24c/0x294 [ath10k_sdio]
[<0>] ath10k_core_stop+0x50/0x78 [ath10k_core]
[<0>] ath10k_halt+0x120/0x178 [ath10k_core]
[<0>] ath10k_stop+0x4c/0x8c [ath10k_core]
[<0>] drv_stop+0xe0/0x1e4 [mac80211]
[<0>] ieee80211_stop_device+0x48/0x54 [mac80211]
[<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211]
[<0>] ieee80211_stop+0x20/0x30 [mac80211]
[<0>] __dev_close_many+0xb8/0x11c
[<0>] __dev_change_flags+0xe0/0x1d0
[<0>] dev_change_flags+0x30/0x6c
[<0>] devinet_ioctl+0x370/0x564
[<0>] inet_ioctl+0xdc/0x304
[<0>] sock_do_ioctl+0x50/0x288
[<0>] compat_sock_ioctl+0x1b4/0x1aac
[<0>] __se_compat_sys_ioctl+0x100/0x26fc
[<0>] __arm64_compat_sys_ioctl+0x20/0x2c
[<0>] el0_svc_common+0xa4/0x154
[<0>] el0_svc_compat_handler+0x2c/0x38
[<0>] el0_svc_compat+0x8/0x18
[<0>] 0xffffffffffffffff

callstack of rmmod:
[<0>] __switch_to+0x120/0x13c
[<0>] msleep+0x28/0x38
[<0>] ath10k_sdio_hif_stop+0x294/0x31c [ath10k_sdio]
[<0>] ath10k_core_stop+0x50/0x78 [ath10k_core]
[<0>] ath10k_halt+0x120/0x178 [ath10k_core]
[<0>] ath10k_stop+0x4c/0x8c [ath10k_core]
[<0>] drv_stop+0xe0/0x1e4 [mac80211]
[<0>] ieee80211_stop_device+0x48/0x54 [mac80211]
[<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211]
[<0>] ieee80211_stop+0x20/0x30 [mac80211]
[<0>] __dev_close_many+0xb8/0x11c
[<0>] dev_close_many+0x70/0x100
[<0>] dev_close+0x4c/0x80
[<0>] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211]
[<0>] ieee80211_remove_interfaces+0x58/0x1a0 [mac80211]
[<0>] ieee80211_unregister_hw+0x40/0x100 [mac80211]
[<0>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core]
[<0>] ath10k_core_unregister+0x38/0x7c [ath10k_core]
[<0>] ath10k_sdio_remove+0x8c/0xd0 [ath10k_sdio]
[<0>] sdio_bus_remove+0x48/0x108
[<0>] device_release_driver_internal+0x138/0x1ec
[<0>] driver_detach+0x6c/0xa8
[<0>] bus_remove_driver+0x78/0xa8
[<0>] driver_unregister+0x30/0x50
[<0>] sdio_unregister_driver+0x28/0x34
[<0>] cleanup_module+0x14/0x6bc [ath10k_sdio]
[<0>] __arm64_sys_delete_module+0x1e0/0x22c
[<0>] el0_svc_common+0xa4/0x154
[<0>] el0_svc_compat_handler+0x2c/0x38
[<0>] el0_svc_compat+0x8/0x18
[<0>] 0xffffffffffffffff

SNOC:
[  647.156863] Call trace:
[  647.162166] [<ffffff80080855a4>] __switch_to+0x120/0x13c
[  647.164512] [<ffffff800899d8b8>] __schedule+0x5ec/0x798
[  647.170062] [<ffffff800899dad8>] schedule+0x74/0x94
[  647.175050] [<ffffff80089a0848>] schedule_timeout+0x314/0x42c
[  647.179874] [<ffffff80089a0a14>] schedule_timeout_uninterruptible+0x34/0x40
[  647.185780] [<ffffff80082a494>] msleep+0x28/0x38
[  647.192546] [<ffffff800117ec4c>] ath10k_snoc_hif_stop+0x4c/0x1e0 [ath10k_snoc]
[  647.197439] [<ffffff80010dfbd8>] ath10k_core_stop+0x50/0x7c [ath10k_core]
[  647.204652] [<ffffff80010c8f48>] ath10k_halt+0x114/0x16c [ath10k_core]
[  647.211420] [<ffffff80010cad68>] ath10k_stop+0x4c/0x88 [ath10k_core]
[  647.217865] [<ffffff8000fdbf54>] drv_stop+0x110/0x244 [mac80211]
[  647.224367] [<ffffff80010147ac>] ieee80211_stop_device+0x48/0x54 [mac80211]
[  647.230359] [<ffffff8000ff3eec>] ieee80211_do_stop+0x6a4/0x73c [mac80211]
[  647.237033] [<ffffff8000ff4500>] ieee80211_stop+0x20/0x30 [mac80211]
[  647.243942] [<ffffff80087e39b8>] __dev_close_many+0xa0/0xfc
[  647.250435] [<ffffff80087e3888>] dev_close_many+0x70/0x100
[  647.255651] [<ffffff80087e3a60>] dev_close+0x4c/0x80
[  647.261244] [<ffffff8000f1ba54>] cfg80211_shutdown_all_interfaces+0x44/0xcc [cfg80211]
[  647.266383] [<ffffff8000ff3fdc>] ieee80211_remove_interfaces+0x58/0x1b4 [mac80211]
[  647.274128] [<ffffff8000fda540>] ieee80211_unregister_hw+0x50/0x120 [mac80211]
[  647.281659] [<ffffff80010ca314>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core]
[  647.288839] [<ffffff80010dfc94>] ath10k_core_unregister+0x48/0x90 [ath10k_core]
[  647.296027] [<ffffff800117e598>] ath10k_snoc_remove+0x5c/0x150 [ath10k_snoc]
[  647.303229] [<ffffff80085625fc>] platform_drv_remove+0x28/0x50
[  647.310517] [<ffffff80085601a4>] device_release_driver_internal+0x114/0x1b8
[  647.316257] [<ffffff80085602e4>] driver_detach+0x6c/0xa8
[  647.323021] [<ffffff800855e5b8>] bus_remove_driver+0x78/0xa8
[  647.328571] [<ffffff800856107c>] driver_unregister+0x30/0x50
[  647.334213] [<ffffff8008562674>] platform_driver_unregister+0x1c/0x28
[  647.339876] [<ffffff800117fefc>] cleanup_module+0x1c/0x120 [ath10k_snoc]
[  647.346196] [<ffffff8008143ab8>] SyS_delete_module+0x1dc/0x22c

PCIe:
[  615.392770] rmmod           D    0  3523   3458 0x00000080
[  615.392777] Call Trace:
[  615.392784]  __schedule+0x617/0x7d3
[  615.392791]  ? __mod_timer+0x263/0x35c
[  615.392797]  schedule+0x62/0x72
[  615.392803]  schedule_timeout+0x8d/0xf3
[  615.392809]  ? run_local_timers+0x6b/0x6b
[  615.392814]  msleep+0x1b/0x22
[  615.392824]  ath10k_pci_hif_stop+0x68/0xd6 [ath10k_pci]
[  615.392844]  ath10k_core_stop+0x44/0x67 [ath10k_core]
[  615.392859]  ath10k_halt+0x102/0x153 [ath10k_core]
[  615.392873]  ath10k_stop+0x38/0x75 [ath10k_core]
[  615.392893]  drv_stop+0x9a/0x13c [mac80211]
[  615.392915]  ieee80211_do_stop+0x772/0x7cd [mac80211]
[  615.392937]  ieee80211_stop+0x1a/0x1e [mac80211]
[  615.392945]  __dev_close_many+0x9e/0xf0
[  615.392952]  dev_close_many+0x62/0xe8
[  615.392958]  dev_close+0x54/0x7d
[  615.392975]  cfg80211_shutdown_all_interfaces+0x6e/0xa5 [cfg80211]
[  615.393021]  ieee80211_remove_interfaces+0x52/0x1aa [mac80211]
[  615.393049]  ieee80211_unregister_hw+0x54/0x136 [mac80211]
[  615.393068]  ath10k_mac_unregister+0x19/0x4a [ath10k_core]
[  615.393091]  ath10k_core_unregister+0x39/0x7e [ath10k_core]
[  615.393104]  ath10k_pci_remove+0x3d/0x7f [ath10k_pci]
[  615.393117]  pci_device_remove+0x41/0xa6
[  615.393129]  device_release_driver_internal+0x123/0x1ec
[  615.393140]  driver_detach+0x60/0x90
[  615.393152]  bus_remove_driver+0x72/0x9f
[  615.393164]  pci_unregister_driver+0x1e/0x87
[  615.393177]  SyS_delete_module+0x1d7/0x277
[  615.393188]  do_syscall_64+0x6b/0xf7
[  615.393199]  entry_SYSCALL_64_after_hwframe+0x41/0xa6

The test command run simulate_fw_crash firstly and it call into
ath10k_sdio_hif_stop from ath10k_core_restart, then napi_disable
is called and bit NAPI_STATE_SCHED is set. After that, function
ath10k_sdio_hif_stop is called again from ath10k_stop by command
"ifconfig wlan0 down" or "rmmod ath10k_sdio", then command blocked.

It is blocked by napi_synchronize, napi_disable will set bit with
NAPI_STATE_SCHED, and then napi_synchronize will enter dead loop
becuase bit NAPI_STATE_SCHED is set by napi_disable.

function of napi_synchronize
static inline void napi_synchronize(const struct napi_struct *n)
{
	if (IS_ENABLED(CONFIG_SMP))
		while (test_bit(NAPI_STATE_SCHED, &n->state))
			msleep(1);
	else
		barrier();
}

function of napi_disable
void napi_disable(struct napi_struct *n)
{
	might_sleep();
	set_bit(NAPI_STATE_DISABLE, &n->state);

	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
		msleep(1);
	while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
		msleep(1);

	hrtimer_cancel(&n->timer);

	clear_bit(NAPI_STATE_DISABLE, &n->state);
}

Add flag for it avoid the hang and crash.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Tested-on: WCN3990 hw1.0 SNOC hw1.0 WLAN.HL.3.1-01307.1-QCAHLSWMTPL-2

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1598617348-2325-1-git-send-email-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/ahb.c  |  5 ++---
 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/core.h |  5 +++++
 drivers/net/wireless/ath/ath10k/pci.c  |  7 ++++---
 drivers/net/wireless/ath/ath10k/sdio.c |  5 ++---
 drivers/net/wireless/ath/ath10k/snoc.c |  6 +++---
 6 files changed, 41 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 05a61975c83f4..869524852fbaa 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -626,7 +626,7 @@ static int ath10k_ahb_hif_start(struct ath10k *ar)
 {
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif start\n");
 
-	napi_enable(&ar->napi);
+	ath10k_core_napi_enable(ar);
 	ath10k_ce_enable_interrupts(ar);
 	ath10k_pci_enable_legacy_irq(ar);
 
@@ -644,8 +644,7 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar)
 	ath10k_ahb_irq_disable(ar);
 	synchronize_irq(ar_ahb->irq);
 
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+	ath10k_core_napi_sync_disable(ar);
 
 	ath10k_pci_flush(ar);
 }
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index eeb6ff6aa2e1e..a419ec7130f97 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2305,6 +2305,31 @@ void ath10k_core_start_recovery(struct ath10k *ar)
 }
 EXPORT_SYMBOL(ath10k_core_start_recovery);
 
+void ath10k_core_napi_enable(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags))
+		return;
+
+	napi_enable(&ar->napi);
+	set_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags);
+}
+EXPORT_SYMBOL(ath10k_core_napi_enable);
+
+void ath10k_core_napi_sync_disable(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags))
+		return;
+
+	napi_synchronize(&ar->napi);
+	napi_disable(&ar->napi);
+	clear_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags);
+}
+EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
+
 static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 51f7e960e2977..f4be6bfb25392 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -868,6 +868,9 @@ enum ath10k_dev_flags {
 
 	/* Indicates that ath10k device is during recovery process and not complete */
 	ATH10K_FLAG_RESTARTING,
+
+	/* protected by conf_mutex */
+	ATH10K_FLAG_NAPI_ENABLED,
 };
 
 enum ath10k_cal_mode {
@@ -1308,6 +1311,8 @@ static inline bool ath10k_peer_stats_enabled(struct ath10k *ar)
 
 extern unsigned long ath10k_coredump_mask;
 
+void ath10k_core_napi_sync_disable(struct ath10k *ar);
+void ath10k_core_napi_enable(struct ath10k *ar);
 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 				  enum ath10k_bus bus,
 				  enum ath10k_hw_rev hw_rev,
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2328df09875ce..e7fde635e0eef 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1958,7 +1958,7 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif start\n");
 
-	napi_enable(&ar->napi);
+	ath10k_core_napi_enable(ar);
 
 	ath10k_pci_irq_enable(ar);
 	ath10k_pci_rx_post(ar);
@@ -2075,8 +2075,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_pci_irq_disable(ar);
 	ath10k_pci_irq_sync(ar);
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+
+	ath10k_core_napi_sync_disable(ar);
+
 	cancel_work_sync(&ar_pci->dump_work);
 
 	/* Most likely the device has HTT Rx ring configured. The only way to
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index c415090d1f37c..b746052737e0b 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1859,7 +1859,7 @@ static int ath10k_sdio_hif_start(struct ath10k *ar)
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
 	int ret;
 
-	napi_enable(&ar->napi);
+	ath10k_core_napi_enable(ar);
 
 	/* Sleep 20 ms before HIF interrupts are disabled.
 	 * This will give target plenty of time to process the BMI done
@@ -1992,8 +1992,7 @@ static void ath10k_sdio_hif_stop(struct ath10k *ar)
 
 	spin_unlock_bh(&ar_sdio->wr_async_lock);
 
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+	ath10k_core_napi_sync_disable(ar);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index bf9a8cb713dc0..2c2df0b8b3fd9 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -915,8 +915,7 @@ static void ath10k_snoc_hif_stop(struct ath10k *ar)
 	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
 		ath10k_snoc_irq_disable(ar);
 
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
+	ath10k_core_napi_sync_disable(ar);
 	ath10k_snoc_buffer_cleanup(ar);
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
 }
@@ -926,7 +925,8 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
 	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
 
 	bitmap_clear(ar_snoc->pending_ce_irqs, 0, CE_COUNT_MAX);
-	napi_enable(&ar->napi);
+
+	ath10k_core_napi_enable(ar);
 	ath10k_snoc_irq_enable(ar);
 	ath10k_snoc_rx_post(ar);
 
-- 
2.27.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 02/67] EDAC/amd64: Do not load on family 0x15, model 0x13
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Borislav Petkov, Don Curtis, Sasha Levin, linux-edac

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 6c13d7ff81e6d2f01f62ccbfa49d1b8d87f274d0 ]

Those were only laptops and are very very unlikely to have ECC memory.
Currently, when the driver attempts to load, it issues:

  EDAC amd64: Error: F1 not found: device 0x1601 (broken BIOS?)

because the PCI device is the wrong one (it uses the F15h default one).

So do not load the driver on them as that is pointless.

Reported-by: Don Curtis <bugrprt21882@online.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Don Curtis <bugrprt21882@online.de>
Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1179763
Link: https://lkml.kernel.org/r/20201218160622.20146-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index f7087ddddb902..5754f429a8d2d 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -3342,10 +3342,13 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
 			fam_type = &family_types[F15_M60H_CPUS];
 			pvt->ops = &family_types[F15_M60H_CPUS].ops;
 			break;
+		/* Richland is only client */
+		} else if (pvt->model == 0x13) {
+			return NULL;
+		} else {
+			fam_type	= &family_types[F15_CPUS];
+			pvt->ops	= &family_types[F15_CPUS].ops;
 		}
-
-		fam_type	= &family_types[F15_CPUS];
-		pvt->ops	= &family_types[F15_CPUS].ops;
 		break;
 
 	case 0x16:
@@ -3539,6 +3542,7 @@ static int probe_one_instance(unsigned int nid)
 	pvt->mc_node_id	= nid;
 	pvt->F3 = F3;
 
+	ret = -ENODEV;
 	fam_type = per_family_init(pvt);
 	if (!fam_type)
 		goto err_enable;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 03/67] staging: fwserial: Fix error handling in fwserial_create
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Dinghao Liu, Greg Kroah-Hartman, Sasha Levin, devel

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fwserial/fwserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index db83d34cd6779..c368082aae1aa 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2189,6 +2189,7 @@ static int fwserial_create(struct fw_unit *unit)
 		err = fw_core_add_address_handler(&port->rx_handler,
 						  &fw_high_memory_region);
 		if (err) {
+			tty_port_destroy(&port->port);
 			kfree(port);
 			goto free_ports;
 		}
@@ -2271,6 +2272,7 @@ static int fwserial_create(struct fw_unit *unit)
 
 free_ports:
 	for (--i; i >= 0; --i) {
+		fw_core_remove_address_handler(&serial->ports[i]->rx_handler);
 		tty_port_destroy(&serial->ports[i]->port);
 		kfree(serial->ports[i]);
 	}
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 03/67] staging: fwserial: Fix error handling in fwserial_create
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Greg Kroah-Hartman, devel, Dinghao Liu

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fwserial/fwserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index db83d34cd6779..c368082aae1aa 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2189,6 +2189,7 @@ static int fwserial_create(struct fw_unit *unit)
 		err = fw_core_add_address_handler(&port->rx_handler,
 						  &fw_high_memory_region);
 		if (err) {
+			tty_port_destroy(&port->port);
 			kfree(port);
 			goto free_ports;
 		}
@@ -2271,6 +2272,7 @@ static int fwserial_create(struct fw_unit *unit)
 
 free_ports:
 	for (--i; i >= 0; --i) {
+		fw_core_remove_address_handler(&serial->ports[i]->rx_handler);
 		tty_port_destroy(&serial->ports[i]->port);
 		kfree(serial->ports[i]);
 	}
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 04/67] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk
  2021-02-24 12:49 ` Sasha Levin
                   ` (2 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Heiner Kallweit, Borislav Petkov, Sasha Levin

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 4b2d8ca9208be636b30e924b1cbcb267b0740c93 ]

On this system the M.2 PCIe WiFi card isn't detected after reboot, only
after cold boot. reboot=pci fixes this behavior. In [0] the same issue
is described, although on another system and with another Intel WiFi
card. In case it's relevant, both systems have Celeron CPUs.

Add a PCI reboot quirk on affected systems until a more generic fix is
available.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202399

 [ bp: Massage commit message. ]

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/reboot.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index db115943e8bdc..9991c5920aace 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -477,6 +477,15 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = {
 		},
 	},
 
+	{	/* PCIe Wifi card isn't detected after reboot otherwise */
+		.callback = set_pci_reboot,
+		.ident = "Zotac ZBOX CI327 nano",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "NA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZBOX-CI327NANO-GS-01"),
+		},
+	},
+
 	/* Sony */
 	{	/* Handle problems with rebooting on Sony VGN-Z540N */
 		.callback = set_bios_reboot,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 05/67] can: flexcan: add CAN wakeup function for i.MX8QM
  2021-02-24 12:49 ` Sasha Levin
                   ` (3 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  2021-02-25  2:48   ` Fabio Estevam
  -1 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Joakim Zhang, Marc Kleine-Budde, Sasha Levin, linux-can, netdev

From: Joakim Zhang <qiangqing.zhang@nxp.com>

[ Upstream commit 812f0116c66a3ebaf0b6062226aa85574dd79f67 ]

The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX). SCU driver manages the IPC interface
between host CPU and the SCU firmware running on M4.

For i.MX8QM, stop mode request is controlled by System Controller Unit(SCU)
firmware, this patch introduces FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW quirk
for this function.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201106105627.31061-6-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/flexcan.c | 123 ++++++++++++++++++++++++++++++++------
 1 file changed, 106 insertions(+), 17 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 038fe1036df23..7ab20a6b0d1db 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -9,6 +9,7 @@
 //
 // Based on code originally by Andrey Volkov <avolkov@varma-el.com>
 
+#include <dt-bindings/firmware/imx/rsrc.h>
 #include <linux/bitfield.h>
 #include <linux/can.h>
 #include <linux/can/dev.h>
@@ -17,6 +18,7 @@
 #include <linux/can/rx-offload.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/firmware/imx/sci.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
@@ -242,6 +244,8 @@
 #define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
 /* support memory detection and correction */
 #define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10)
+/* Setup stop mode with SCU firmware to support wakeup */
+#define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11)
 
 /* Structure of the message buffer */
 struct flexcan_mb {
@@ -347,6 +351,7 @@ struct flexcan_priv {
 	u8 mb_count;
 	u8 mb_size;
 	u8 clk_src;	/* clock source of CAN Protocol Engine */
+	u8 scu_idx;
 
 	u64 rx_mask;
 	u64 tx_mask;
@@ -358,6 +363,9 @@ struct flexcan_priv {
 	struct regulator *reg_xceiver;
 	struct flexcan_stop_mode stm;
 
+	/* IPC handle when setup stop mode by System Controller firmware(scfw) */
+	struct imx_sc_ipc *sc_ipc_handle;
+
 	/* Read and Write APIs */
 	u32 (*read)(void __iomem *addr);
 	void (*write)(u32 val, void __iomem *addr);
@@ -387,7 +395,7 @@ static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
 static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_SUPPORT_FD,
+		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW,
 };
 
 static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
@@ -546,18 +554,42 @@ static void flexcan_enable_wakeup_irq(struct flexcan_priv *priv, bool enable)
 	priv->write(reg_mcr, &regs->mcr);
 }
 
+static int flexcan_stop_mode_enable_scfw(struct flexcan_priv *priv, bool enabled)
+{
+	u8 idx = priv->scu_idx;
+	u32 rsrc_id, val;
+
+	rsrc_id = IMX_SC_R_CAN(idx);
+
+	if (enabled)
+		val = 1;
+	else
+		val = 0;
+
+	/* stop mode request via scu firmware */
+	return imx_sc_misc_set_control(priv->sc_ipc_handle, rsrc_id,
+				       IMX_SC_C_IPG_STOP, val);
+}
+
 static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
 	u32 reg_mcr;
+	int ret;
 
 	reg_mcr = priv->read(&regs->mcr);
 	reg_mcr |= FLEXCAN_MCR_SLF_WAK;
 	priv->write(reg_mcr, &regs->mcr);
 
 	/* enable stop request */
-	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
-			   1 << priv->stm.req_bit, 1 << priv->stm.req_bit);
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
+		ret = flexcan_stop_mode_enable_scfw(priv, true);
+		if (ret < 0)
+			return ret;
+	} else {
+		regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
+				   1 << priv->stm.req_bit, 1 << priv->stm.req_bit);
+	}
 
 	return flexcan_low_power_enter_ack(priv);
 }
@@ -566,10 +598,17 @@ static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
 	u32 reg_mcr;
+	int ret;
 
 	/* remove stop request */
-	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
-			   1 << priv->stm.req_bit, 0);
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
+		ret = flexcan_stop_mode_enable_scfw(priv, false);
+		if (ret < 0)
+			return ret;
+	} else {
+		regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
+				   1 << priv->stm.req_bit, 0);
+	}
 
 	reg_mcr = priv->read(&regs->mcr);
 	reg_mcr &= ~FLEXCAN_MCR_SLF_WAK;
@@ -1867,7 +1906,7 @@ static void unregister_flexcandev(struct net_device *dev)
 	unregister_candev(dev);
 }
 
-static int flexcan_setup_stop_mode(struct platform_device *pdev)
+static int flexcan_setup_stop_mode_gpr(struct platform_device *pdev)
 {
 	struct net_device *dev = platform_get_drvdata(pdev);
 	struct device_node *np = pdev->dev.of_node;
@@ -1912,11 +1951,6 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev)
 		"gpr %s req_gpr=0x02%x req_bit=%u\n",
 		gpr_np->full_name, priv->stm.req_gpr, priv->stm.req_bit);
 
-	device_set_wakeup_capable(&pdev->dev, true);
-
-	if (of_property_read_bool(np, "wakeup-source"))
-		device_set_wakeup_enable(&pdev->dev, true);
-
 	return 0;
 
 out_put_node:
@@ -1924,6 +1958,58 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev)
 	return ret;
 }
 
+static int flexcan_setup_stop_mode_scfw(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct flexcan_priv *priv;
+	u8 scu_idx;
+	int ret;
+
+	ret = of_property_read_u8(pdev->dev.of_node, "fsl,scu-index", &scu_idx);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "failed to get scu index\n");
+		return ret;
+	}
+
+	priv = netdev_priv(dev);
+	priv->scu_idx = scu_idx;
+
+	/* this function could be defered probe, return -EPROBE_DEFER */
+	return imx_scu_get_handle(&priv->sc_ipc_handle);
+}
+
+/* flexcan_setup_stop_mode - Setup stop mode for wakeup
+ *
+ * Return: = 0 setup stop mode successfully or doesn't support this feature
+ *         < 0 fail to setup stop mode (could be defered probe)
+ */
+static int flexcan_setup_stop_mode(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct flexcan_priv *priv;
+	int ret;
+
+	priv = netdev_priv(dev);
+
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW)
+		ret = flexcan_setup_stop_mode_scfw(pdev);
+	else if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR)
+		ret = flexcan_setup_stop_mode_gpr(pdev);
+	else
+		/* return 0 directly if doesn't support stop mode feature */
+		return 0;
+
+	if (ret)
+		return ret;
+
+	device_set_wakeup_capable(&pdev->dev, true);
+
+	if (of_property_read_bool(pdev->dev.of_node, "wakeup-source"))
+		device_set_wakeup_enable(&pdev->dev, true);
+
+	return 0;
+}
+
 static const struct of_device_id flexcan_of_match[] = {
 	{ .compatible = "fsl,imx8qm-flexcan", .data = &fsl_imx8qm_devtype_data, },
 	{ .compatible = "fsl,imx8mp-flexcan", .data = &fsl_imx8mp_devtype_data, },
@@ -2054,17 +2140,20 @@ static int flexcan_probe(struct platform_device *pdev)
 		goto failed_register;
 	}
 
+	err = flexcan_setup_stop_mode(pdev);
+	if (err < 0) {
+		if (err != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "setup stop mode failed\n");
+		goto failed_setup_stop_mode;
+	}
+
 	of_can_transceiver(dev);
 	devm_can_led_init(dev);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR) {
-		err = flexcan_setup_stop_mode(pdev);
-		if (err)
-			dev_dbg(&pdev->dev, "failed to setup stop-mode\n");
-	}
-
 	return 0;
 
+ failed_setup_stop_mode:
+	unregister_flexcandev(dev);
  failed_register:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 06/67] vt/consolemap: do font sum unsigned
  2021-02-24 12:49 ` Sasha Levin
                   ` (4 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jiri Slaby, Greg Kroah-Hartman, Sasha Levin

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ]

The constant 20 makes the font sum computation signed which can lead to
sign extensions and signed wraps. It's not much of a problem as we build
with -fno-strict-overflow. But if we ever decide not to, be ready, so
switch the constant to unsigned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vt/consolemap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index f7d015c67963d..d815ac98b39e3 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -495,7 +495,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
 
 	p2[unicode & 0x3f] = fontpos;
 	
-	p->sum += (fontpos << 20) + unicode;
+	p->sum += (fontpos << 20U) + unicode;
 
 	return 0;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 07/67] wlcore: Fix command execute failure 19 for wl12xx
  2021-02-24 12:49 ` Sasha Levin
                   ` (5 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tony Lindgren, Raz Bouganim, Kalle Valo, Sasha Levin,
	linux-wireless, netdev

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ]

We can currently get a "command execute failure 19" error on beacon loss
if the signal is weak:

wlcore: Beacon loss detected. roles:0xff
wlcore: Connection loss work (role_id: 0).
...
wlcore: ERROR command execute failure 19
...
WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803
...
(wl12xx_queue_recovery_work.part.0 [wlcore])
(wl12xx_cmd_role_start_sta [wlcore])
(wl1271_op_bss_info_changed [wlcore])
(ieee80211_prep_connection [mac80211])

Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware,
and seems to mean that the firmware no longer wants to see the quirk
handling for WLCORE_QUIRK_START_STA_FAILS done.

This quirk got added with commit 18eab430700d ("wlcore: workaround
start_sta problem in wl12xx fw"), and it seems that this already got fixed
in the firmware long time ago back in 2012 as wl18xx never had this quirk
in place to start with.

As we no longer even support firmware that early, to me it seems that it's
safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks
like earlier firmware got disabled back in 2013 with commit 0e284c074ef9
("wl12xx: increase minimum singlerole firmware version required").

If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any
firmware that the driver works with, we can simply revert this patch and
add extra checks for firmware version used.

With this fix wlcore reconnects properly after a beacon loss.

Cc: Raz Bouganim <r-bouganim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl12xx/main.c   |  3 ---
 drivers/net/wireless/ti/wlcore/main.c   | 15 +--------------
 drivers/net/wireless/ti/wlcore/wlcore.h |  3 ---
 3 files changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 3c9c623bb4283..9d7dbfe7fe0c3 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -635,7 +635,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 		wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
 		wl->mr_fw_name = WL127X_FW_NAME_MULTI;
@@ -659,7 +658,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 		wl->plt_fw_name = WL127X_PLT_FW_NAME;
 		wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
@@ -688,7 +686,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 
 		wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 122c7a4b374f1..0f9cc3de6aebc 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2872,21 +2872,8 @@ static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	if (is_ibss)
 		ret = wl12xx_cmd_role_start_ibss(wl, wlvif);
-	else {
-		if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) {
-			/*
-			 * TODO: this is an ugly workaround for wl12xx fw
-			 * bug - we are not able to tx/rx after the first
-			 * start_sta, so make dummy start+stop calls,
-			 * and then call start_sta again.
-			 * this should be fixed in the fw.
-			 */
-			wl12xx_cmd_role_start_sta(wl, wlvif);
-			wl12xx_cmd_role_stop_sta(wl, wlvif);
-		}
-
+	else
 		ret = wl12xx_cmd_role_start_sta(wl, wlvif);
-	}
 
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index b7821311ac75b..81c94d390623b 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -547,9 +547,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip,
 /* Each RX/TX transaction requires an end-of-transaction transfer */
 #define WLCORE_QUIRK_END_OF_TRANSACTION		BIT(0)
 
-/* the first start_role(sta) sometimes doesn't work on wl12xx */
-#define WLCORE_QUIRK_START_STA_FAILS		BIT(1)
-
 /* wl127x and SPI don't support SDIO block size alignment */
 #define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN		BIT(2)
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 08/67] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl
  2021-02-24 12:49 ` Sasha Levin
                   ` (6 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Claire Chang, Marcel Holtmann, Sasha Levin, linux-bluetooth

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ]

Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry
at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_h5.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 7be16a7f653bd..95ecd30e6619e 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -906,6 +906,11 @@ static int h5_btrtl_setup(struct h5 *h5)
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
 
+	/* Enable controller to do both LE scan and BR/EDR inquiry
+	 * simultaneously.
+	 */
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
+
 out_free:
 	btrtl_free(btrtl_dev);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 09/67] Bluetooth: btusb: fix memory leak on suspend and resume
  2021-02-24 12:49 ` Sasha Levin
                   ` (7 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vamshi K Sthambamkadi, Marcel Holtmann, Sasha Levin,
	linux-bluetooth, netdev

From: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>

[ Upstream commit 5ff20cbe6752a5bc06ff58fee8aa11a0d5075819 ]

kmemleak report:
unreferenced object 0xffff9b1127f00500 (size 208):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00  .`..............
  backtrace:
    [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480
    [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0
    [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
    [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
    [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
    [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
    [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b1125c6ee00 (size 512):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 32 bytes):
    04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270
    [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330
    [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90
    [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0
    [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
    [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
    [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
    [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
    [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b112b395788 (size 8):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 8 bytes):
    20 00 00 00 00 00 04 00                           .......
  backtrace:
    [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460
    [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb]
    [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb]
    [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth]
    [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30

In pm sleep-resume context, while the btusb device rebinds, it enters
hci_unregister_dev(), whilst there is a possibility of hdev receiving
PM_POST_SUSPEND suspend_notifier event, leading to generation of msg
frames. When hci_unregister_dev() completes, i.e. hdev context is
destroyed/freed, those intermittently sent msg frames cause memory
leak.

BUG details:
Below is stack trace of thread that enters hci_unregister_dev(), marks
the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier
lock - refer unregister_pm_notifier().

  hci_unregister_dev+0xa5/0x320 [bluetoot]
  btusb_disconnect+0x68/0x150 [btusb]
  usb_unbind_interface+0x77/0x250
  ? kernfs_remove_by_name_ns+0x75/0xa0
  device_release_driver_internal+0xfe/0x1
  device_release_driver+0x12/0x20
  bus_remove_device+0xe1/0x150
  device_del+0x192/0x3e0
  ? usb_remove_ep_devs+0x1f/0x30
  usb_disable_device+0x92/0x1b0
  usb_disconnect+0xc2/0x270
  hub_event+0x9f6/0x15d0
  ? rpm_idle+0x23/0x360
  ? rpm_idle+0x26b/0x360
  process_one_work+0x209/0x3b0
  worker_thread+0x34/0x400
  ? process_one_work+0x3b0/0x3b0
  kthread+0x126/0x140
  ? kthread_park+0x90/0x90
  ret_from_fork+0x22/0x30

Below is stack trace of thread executing hci_suspend_notifier() which
processes the PM_POST_SUSPEND event, while the unbinding thread is
waiting on lock.

  hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth]
  blocking_notifier_call_chain+0x69/0x90
  pm_notifier_call_chain+0x1a/0x20
  pm_suspend.cold.9+0x334/0x352
  state_store+0x84/0xf0
  kobj_attr_store+0x12/0x20
  sysfs_kf_write+0x3b/0x40
  kernfs_fop_write+0xda/0x1c0
  vfs_write+0xbb/0x250
  ksys_write+0x61/0xe0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x37/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER
is set.

Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 9d2c9a1c552fd..1c793e6eb92ae 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3566,7 +3566,8 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
 	}
 
 	/* Suspend notifier should only act on events when powered. */
-	if (!hdev_is_powered(hdev))
+	if (!hdev_is_powered(hdev) ||
+	    hci_dev_test_flag(hdev, HCI_UNREGISTER))
 		goto done;
 
 	if (action == PM_SUSPEND_PREPARE) {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 10/67] selftests/bpf: Remove memory leak
  2021-02-24 12:49 ` Sasha Levin
                   ` (8 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Björn Töpel, Daniel Borkmann, Sasha Levin, netdev, bpf,
	linux-kselftest

From: Björn Töpel <bjorn.topel@intel.com>

[ Upstream commit 4896d7e37ea5217d42e210bfcf4d56964044704f ]

The allocated entry is immediately overwritten by an assignment. Fix
that.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210122154725.22140-5-bjorn.topel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/xdpxceiver.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c
index 1e722ee76b1fc..e7945b6246c82 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.c
+++ b/tools/testing/selftests/bpf/xdpxceiver.c
@@ -729,7 +729,6 @@ static void worker_pkt_validate(void)
 	u32 payloadseqnum = -2;
 
 	while (1) {
-		pkt_node_rx_q = malloc(sizeof(struct pkt));
 		pkt_node_rx_q = TAILQ_LAST(&head, head_s);
 		if (!pkt_node_rx_q)
 			break;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 11/67] mt76: mt7915: reset token when mac_reset happens
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ryder Lee, Bo Jiao, Felix Fietkau, Sasha Levin, linux-wireless,
	netdev, linux-arm-kernel, linux-mediatek

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit f285dfb98562e8380101095d168910df1d07d8be ]

Reset buffering token in mt7915_mac_reset_work() to avoid possible leakege,
which leads to Tx stop after mac reset.

Tested-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7915/init.c  | 18 +-------------
 .../net/wireless/mediatek/mt76/mt7915/mac.c   | 24 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7915/mt7915.h    |  1 +
 3 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 102a8f14c22d4..2ec18aaa82807 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -672,28 +672,12 @@ int mt7915_register_device(struct mt7915_dev *dev)
 
 void mt7915_unregister_device(struct mt7915_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
-	int id;
-
 	mt7915_unregister_ext_phy(dev);
 	mt76_unregister_device(&dev->mt76);
 	mt7915_mcu_exit(dev);
 	mt7915_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7915_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb) {
-			struct ieee80211_hw *hw;
-
-			hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
-			ieee80211_free_txskb(hw, txwi->skb);
-		}
-		mt76_put_txwi(&dev->mt76, txwi);
-		dev->token_count--;
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7915_tx_token_put(dev);
 
 	mt76_free_device(&dev->mt76);
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index f504eeb221f95..1b4d65310b887 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1485,6 +1485,27 @@ mt7915_dma_reset(struct mt7915_phy *phy)
 		 MT_WFDMA1_GLO_CFG_TX_DMA_EN | MT_WFDMA1_GLO_CFG_RX_DMA_EN);
 }
 
+void mt7915_tx_token_put(struct mt7915_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7915_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb) {
+			struct ieee80211_hw *hw;
+
+			hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
+			ieee80211_free_txskb(hw, txwi->skb);
+		}
+		mt76_put_txwi(&dev->mt76, txwi);
+		dev->token_count--;
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+
 /* system error recovery */
 void mt7915_mac_reset_work(struct work_struct *work)
 {
@@ -1525,6 +1546,9 @@ void mt7915_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_DMA_STOPPED);
 
+	mt7915_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7915_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7915_dma_reset(&dev->phy);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
index 0339abf360d3f..94bed8a3a050a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
@@ -463,6 +463,7 @@ int mt7915_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct ieee80211_sta *sta,
 			  struct mt76_tx_info *tx_info);
 void mt7915_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
+void mt7915_tx_token_put(struct mt7915_dev *dev);
 int mt7915_init_tx_queues(struct mt7915_phy *phy, int idx, int n_desc);
 void mt7915_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 11/67] mt76: mt7915: reset token when mac_reset happens
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Ryder Lee, netdev, linux-wireless, Bo Jiao,
	linux-mediatek, linux-arm-kernel, Felix Fietkau

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit f285dfb98562e8380101095d168910df1d07d8be ]

Reset buffering token in mt7915_mac_reset_work() to avoid possible leakege,
which leads to Tx stop after mac reset.

Tested-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7915/init.c  | 18 +-------------
 .../net/wireless/mediatek/mt76/mt7915/mac.c   | 24 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7915/mt7915.h    |  1 +
 3 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 102a8f14c22d4..2ec18aaa82807 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -672,28 +672,12 @@ int mt7915_register_device(struct mt7915_dev *dev)
 
 void mt7915_unregister_device(struct mt7915_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
-	int id;
-
 	mt7915_unregister_ext_phy(dev);
 	mt76_unregister_device(&dev->mt76);
 	mt7915_mcu_exit(dev);
 	mt7915_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7915_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb) {
-			struct ieee80211_hw *hw;
-
-			hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
-			ieee80211_free_txskb(hw, txwi->skb);
-		}
-		mt76_put_txwi(&dev->mt76, txwi);
-		dev->token_count--;
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7915_tx_token_put(dev);
 
 	mt76_free_device(&dev->mt76);
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index f504eeb221f95..1b4d65310b887 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1485,6 +1485,27 @@ mt7915_dma_reset(struct mt7915_phy *phy)
 		 MT_WFDMA1_GLO_CFG_TX_DMA_EN | MT_WFDMA1_GLO_CFG_RX_DMA_EN);
 }
 
+void mt7915_tx_token_put(struct mt7915_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7915_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb) {
+			struct ieee80211_hw *hw;
+
+			hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
+			ieee80211_free_txskb(hw, txwi->skb);
+		}
+		mt76_put_txwi(&dev->mt76, txwi);
+		dev->token_count--;
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+
 /* system error recovery */
 void mt7915_mac_reset_work(struct work_struct *work)
 {
@@ -1525,6 +1546,9 @@ void mt7915_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_DMA_STOPPED);
 
+	mt7915_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7915_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7915_dma_reset(&dev->phy);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
index 0339abf360d3f..94bed8a3a050a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
@@ -463,6 +463,7 @@ int mt7915_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct ieee80211_sta *sta,
 			  struct mt76_tx_info *tx_info);
 void mt7915_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
+void mt7915_tx_token_put(struct mt7915_dev *dev);
 int mt7915_init_tx_queues(struct mt7915_phy *phy, int idx, int n_desc);
 void mt7915_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
-- 
2.27.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 11/67] mt76: mt7915: reset token when mac_reset happens
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Ryder Lee, netdev, linux-wireless, Bo Jiao,
	linux-mediatek, linux-arm-kernel, Felix Fietkau

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit f285dfb98562e8380101095d168910df1d07d8be ]

Reset buffering token in mt7915_mac_reset_work() to avoid possible leakege,
which leads to Tx stop after mac reset.

Tested-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7915/init.c  | 18 +-------------
 .../net/wireless/mediatek/mt76/mt7915/mac.c   | 24 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7915/mt7915.h    |  1 +
 3 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 102a8f14c22d4..2ec18aaa82807 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -672,28 +672,12 @@ int mt7915_register_device(struct mt7915_dev *dev)
 
 void mt7915_unregister_device(struct mt7915_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
-	int id;
-
 	mt7915_unregister_ext_phy(dev);
 	mt76_unregister_device(&dev->mt76);
 	mt7915_mcu_exit(dev);
 	mt7915_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7915_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb) {
-			struct ieee80211_hw *hw;
-
-			hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
-			ieee80211_free_txskb(hw, txwi->skb);
-		}
-		mt76_put_txwi(&dev->mt76, txwi);
-		dev->token_count--;
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7915_tx_token_put(dev);
 
 	mt76_free_device(&dev->mt76);
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index f504eeb221f95..1b4d65310b887 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1485,6 +1485,27 @@ mt7915_dma_reset(struct mt7915_phy *phy)
 		 MT_WFDMA1_GLO_CFG_TX_DMA_EN | MT_WFDMA1_GLO_CFG_RX_DMA_EN);
 }
 
+void mt7915_tx_token_put(struct mt7915_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7915_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb) {
+			struct ieee80211_hw *hw;
+
+			hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
+			ieee80211_free_txskb(hw, txwi->skb);
+		}
+		mt76_put_txwi(&dev->mt76, txwi);
+		dev->token_count--;
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+
 /* system error recovery */
 void mt7915_mac_reset_work(struct work_struct *work)
 {
@@ -1525,6 +1546,9 @@ void mt7915_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_DMA_STOPPED);
 
+	mt7915_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7915_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7915_dma_reset(&dev->phy);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
index 0339abf360d3f..94bed8a3a050a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
@@ -463,6 +463,7 @@ int mt7915_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct ieee80211_sta *sta,
 			  struct mt76_tx_info *tx_info);
 void mt7915_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
+void mt7915_tx_token_put(struct mt7915_dev *dev);
 int mt7915_init_tx_queues(struct mt7915_phy *phy, int idx, int n_desc);
 void mt7915_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 12/67] mt76: mt7615: reset token when mac_reset happens
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ryder Lee, Felix Fietkau, Sasha Levin, linux-wireless, netdev,
	linux-arm-kernel, linux-mediatek

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]

Reset token in mt7615_mac_reset_work() to avoid possible leakege.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 20 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |  2 +-
 .../wireless/mediatek/mt76/mt7615/pci_init.c  | 12 +----------
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 0f360be0b8851..fb10a6497ed05 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2058,6 +2058,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
 }
 EXPORT_SYMBOL_GPL(mt7615_dma_reset);
 
+void mt7615_tx_token_put(struct mt7615_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7615_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb)
+			dev_kfree_skb_any(txwi->skb);
+		mt76_put_txwi(&dev->mt76, txwi);
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+EXPORT_SYMBOL_GPL(mt7615_tx_token_put);
+
 void mt7615_mac_reset_work(struct work_struct *work)
 {
 	struct mt7615_phy *phy2;
@@ -2101,6 +2118,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
 
+	mt7615_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7615_dma_reset(dev);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 99b8abdbb08f7..d697ff2ea56e8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -583,7 +583,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct mt76_tx_info *tx_info);
 
 void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
-
+void mt7615_tx_token_put(struct mt7615_dev *dev);
 void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
 void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 27fcb1374685b..58a0ec1bf8d7b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -160,9 +160,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
 
 void mt7615_unregister_device(struct mt7615_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
 	bool mcu_running;
-	int id;
 
 	mcu_running = mt7615_wait_for_mcu_init(dev);
 
@@ -172,15 +170,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
 		mt7615_mcu_exit(dev);
 	mt7615_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7615_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb)
-			dev_kfree_skb_any(txwi->skb);
-		mt76_put_txwi(&dev->mt76, txwi);
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7615_tx_token_put(dev);
 
 	tasklet_disable(&dev->irq_tasklet);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 12/67] mt76: mt7615: reset token when mac_reset happens
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Ryder Lee, netdev, linux-wireless, linux-mediatek,
	linux-arm-kernel, Felix Fietkau

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]

Reset token in mt7615_mac_reset_work() to avoid possible leakege.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 20 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |  2 +-
 .../wireless/mediatek/mt76/mt7615/pci_init.c  | 12 +----------
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 0f360be0b8851..fb10a6497ed05 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2058,6 +2058,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
 }
 EXPORT_SYMBOL_GPL(mt7615_dma_reset);
 
+void mt7615_tx_token_put(struct mt7615_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7615_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb)
+			dev_kfree_skb_any(txwi->skb);
+		mt76_put_txwi(&dev->mt76, txwi);
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+EXPORT_SYMBOL_GPL(mt7615_tx_token_put);
+
 void mt7615_mac_reset_work(struct work_struct *work)
 {
 	struct mt7615_phy *phy2;
@@ -2101,6 +2118,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
 
+	mt7615_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7615_dma_reset(dev);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 99b8abdbb08f7..d697ff2ea56e8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -583,7 +583,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct mt76_tx_info *tx_info);
 
 void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
-
+void mt7615_tx_token_put(struct mt7615_dev *dev);
 void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
 void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 27fcb1374685b..58a0ec1bf8d7b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -160,9 +160,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
 
 void mt7615_unregister_device(struct mt7615_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
 	bool mcu_running;
-	int id;
 
 	mcu_running = mt7615_wait_for_mcu_init(dev);
 
@@ -172,15 +170,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
 		mt7615_mcu_exit(dev);
 	mt7615_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7615_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb)
-			dev_kfree_skb_any(txwi->skb);
-		mt76_put_txwi(&dev->mt76, txwi);
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7615_tx_token_put(dev);
 
 	tasklet_disable(&dev->irq_tasklet);
 
-- 
2.27.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 12/67] mt76: mt7615: reset token when mac_reset happens
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Ryder Lee, netdev, linux-wireless, linux-mediatek,
	linux-arm-kernel, Felix Fietkau

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]

Reset token in mt7615_mac_reset_work() to avoid possible leakege.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 20 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |  2 +-
 .../wireless/mediatek/mt76/mt7615/pci_init.c  | 12 +----------
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 0f360be0b8851..fb10a6497ed05 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2058,6 +2058,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
 }
 EXPORT_SYMBOL_GPL(mt7615_dma_reset);
 
+void mt7615_tx_token_put(struct mt7615_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7615_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb)
+			dev_kfree_skb_any(txwi->skb);
+		mt76_put_txwi(&dev->mt76, txwi);
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+EXPORT_SYMBOL_GPL(mt7615_tx_token_put);
+
 void mt7615_mac_reset_work(struct work_struct *work)
 {
 	struct mt7615_phy *phy2;
@@ -2101,6 +2118,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
 
+	mt7615_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7615_dma_reset(dev);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 99b8abdbb08f7..d697ff2ea56e8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -583,7 +583,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct mt76_tx_info *tx_info);
 
 void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
-
+void mt7615_tx_token_put(struct mt7615_dev *dev);
 void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
 void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 27fcb1374685b..58a0ec1bf8d7b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -160,9 +160,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
 
 void mt7615_unregister_device(struct mt7615_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
 	bool mcu_running;
-	int id;
 
 	mcu_running = mt7615_wait_for_mcu_init(dev);
 
@@ -172,15 +170,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
 		mt7615_mcu_exit(dev);
 	mt7615_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7615_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb)
-			dev_kfree_skb_any(txwi->skb);
-		mt76_put_txwi(&dev->mt76, txwi);
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7615_tx_token_put(dev);
 
 	tasklet_disable(&dev->irq_tasklet);
 
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 13/67] pktgen: fix misuse of BUG_ON() in pktgen_thread_worker()
  2021-02-24 12:49 ` Sasha Levin
                   ` (11 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Di Zhu, Jakub Kicinski, Sasha Levin, netdev

From: Di Zhu <zhudi21@huawei.com>

[ Upstream commit 275b1e88cabb34dbcbe99756b67e9939d34a99b6 ]

pktgen create threads for all online cpus and bond these threads to
relevant cpu repecivtily. when this thread firstly be woken up, it
will compare cpu currently running with the cpu specified at the time
of creation and if the two cpus are not equal, BUG_ON() will take effect
causing panic on the system.
Notice that these threads could be migrated to other cpus before start
running because of the cpu hotplug after these threads have created. so the
BUG_ON() used here seems unreasonable and we can replace it with WARN_ON()
to just printf a warning other than panic the system.

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/pktgen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 105978604ffdb..3fba429f1f57b 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3464,7 +3464,7 @@ static int pktgen_thread_worker(void *arg)
 	struct pktgen_dev *pkt_dev = NULL;
 	int cpu = t->cpu;
 
-	BUG_ON(smp_processor_id() != cpu);
+	WARN_ON(smp_processor_id() != cpu);
 
 	init_waitqueue_head(&t->queue);
 	complete(&t->start_done);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 14/67] ath10k: fix wmi mgmt tx queue full due to race condition
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Miaoqing Pan, Brian Norris, Kalle Valo, Sasha Levin, ath10k,
	linux-wireless, netdev

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]

Failed to transmit wmi management frames:

[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28

This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,

  CPUx (skb_deuque)			CPUy (__skb_queue_tail)
					next=list
					prev=list
  struct sk_buff *skb = skb_peek(list);	WRITE_ONCE(newsk->next, next);
  WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
  next       = skb->next;		WRITE_ONCE(next->prev, newsk);
  prev       = skb->prev;		WRITE_ONCE(prev->next, newsk);
  skb->next  = skb->prev = NULL;	list->qlen++;
  WRITE_ONCE(next->prev, prev);
  WRITE_ONCE(prev->next, next);

If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.

So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7d98250380ec5..91b1006ef2a27 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3763,23 +3763,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
 static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
-	int ret = 0;
-
-	spin_lock_bh(&ar->data_lock);
 
-	if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+	if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) {
 		ath10k_warn(ar, "wmi mgmt tx queue is full\n");
-		ret = -ENOSPC;
-		goto unlock;
+		return -ENOSPC;
 	}
 
-	__skb_queue_tail(q, skb);
+	skb_queue_tail(q, skb);
 	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
 
-unlock:
-	spin_unlock_bh(&ar->data_lock);
-
-	return ret;
+	return 0;
 }
 
 static enum ath10k_mac_tx_path
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 14/67] ath10k: fix wmi mgmt tx queue full due to race condition
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Miaoqing Pan, netdev, Brian Norris, linux-wireless,
	ath10k, Kalle Valo

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]

Failed to transmit wmi management frames:

[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28

This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,

  CPUx (skb_deuque)			CPUy (__skb_queue_tail)
					next=list
					prev=list
  struct sk_buff *skb = skb_peek(list);	WRITE_ONCE(newsk->next, next);
  WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
  next       = skb->next;		WRITE_ONCE(next->prev, newsk);
  prev       = skb->prev;		WRITE_ONCE(prev->next, newsk);
  skb->next  = skb->prev = NULL;	list->qlen++;
  WRITE_ONCE(next->prev, prev);
  WRITE_ONCE(prev->next, next);

If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.

So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7d98250380ec5..91b1006ef2a27 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3763,23 +3763,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
 static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
-	int ret = 0;
-
-	spin_lock_bh(&ar->data_lock);
 
-	if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+	if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) {
 		ath10k_warn(ar, "wmi mgmt tx queue is full\n");
-		ret = -ENOSPC;
-		goto unlock;
+		return -ENOSPC;
 	}
 
-	__skb_queue_tail(q, skb);
+	skb_queue_tail(q, skb);
 	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
 
-unlock:
-	spin_unlock_bh(&ar->data_lock);
-
-	return ret;
+	return 0;
 }
 
 static enum ath10k_mac_tx_path
-- 
2.27.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 15/67] x86/build: Treat R_386_PLT32 relocation as R_386_PC32
  2021-02-24 12:49 ` Sasha Levin
                   ` (13 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Fangrui Song, Arnd Bergmann, Borislav Petkov, Nick Desaulniers,
	Nathan Chancellor, Sedat Dilek, Sasha Levin, clang-built-linux

From: Fangrui Song <maskray@google.com>

[ Upstream commit bb73d07148c405c293e576b40af37737faf23a6a ]

This is similar to commit

  b21ebf2fb4cd ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32")

but for i386. As far as the kernel is concerned, R_386_PLT32 can be
treated the same as R_386_PC32.

R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which
can only be used by branches. If the referenced symbol is defined
externally, a PLT will be used.

R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be
used by address taking operations and branches. If the referenced symbol
is defined externally, a copy relocation/canonical PLT entry will be
created in the executable.

On x86-64, there is no PIC vs non-PIC PLT distinction and an
R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and
`call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler.
This avoids canonical PLT entries (st_shndx=0, st_value!=0).

On i386, there are 2 types of PLTs, PIC and non-PIC. Currently,
the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and
R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries
are possible ABI issues but GCC/GNU as will likely keep the status
quo because (1) the ABI is legacy (2) the change will drop a GNU
ld diagnostic for non-default visibility ifunc in shared objects.

clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler
generated function declarations, because preventing canonical PLT
entries is weighed over the rare ifunc diagnostic.

Further info for the more interested:

  https://github.com/ClangBuiltLinux/linux/issues/1210
  https://sourceware.org/bugzilla/show_bug.cgi?id=27169
  https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6 [1]

 [ bp: Massage commit message. ]

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/module.c |  1 +
 arch/x86/tools/relocs.c  | 12 ++++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 34b153cbd4acb..5e9a34b5bd741 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -114,6 +114,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
 			*location += sym->st_value;
 			break;
 		case R_386_PC32:
+		case R_386_PLT32:
 			/* Add the value, subtract its position */
 			*location += sym->st_value - (uint32_t)location;
 			break;
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index ce7188cbdae58..1c3a1962cade6 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -867,9 +867,11 @@ static int do_reloc32(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
@@ -910,9 +912,11 @@ static int do_reloc_real(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 16/67] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
  2021-02-24 12:49 ` Sasha Levin
                   ` (14 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Pali Rohár, Jakub Kicinski, Sasha Levin, netdev

From: Pali Rohár <pali@kernel.org>

[ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]

The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information
stored in its EEPROM. It claims to support all transceiver types including
10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is
the only one supported.

This module has also phys_id set to SFF, and the SFP subsystem currently
does not allow to use SFP modules detected as SFFs. Add exception for this
module so it can be detected as supported.

This change finally allows to detect and use SFP GPON module Ubiquiti
U-Fiber Instant on Linux system.

EEPROM content of this SFP module is (where XX is serial number):

00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8    ???........??.??
10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20    ....UBNT
20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41        .??)UF-INSTA
30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36    NT      4   ??.6
40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX    .?..UBNTXXXXXXXX
50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41        140123  `??A

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp-bus.c | 15 +++++++++++++++
 drivers/net/phy/sfp.c     | 17 +++++++++++++++--
 2 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 20b91f5dfc6ed..4cf874fb5c5b4 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
 	phylink_set(modes, 2500baseX_Full);
 }
 
+static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
+				      unsigned long *modes)
+{
+	/* Ubiquiti U-Fiber Instant module claims that support all transceiver
+	 * types including 10G Ethernet which is not truth. So clear all claimed
+	 * modes and set only one mode which module supports: 1000baseX_Full.
+	 */
+	phylink_zero(modes);
+	phylink_set(modes, 1000baseX_Full);
+}
+
 static const struct sfp_quirk sfp_quirks[] = {
 	{
 		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
@@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 		.vendor = "HUAWEI",
 		.part = "MA5671A",
 		.modes = sfp_quirk_2500basex,
+	}, {
+		.vendor = "UBNT",
+		.part = "UF-INSTANT",
+		.modes = sfp_quirk_ubnt_uf_instant,
 	},
 };
 
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 91d74c1a920ab..804295ad8a044 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -273,8 +273,21 @@ static const struct sff_data sff_data = {
 
 static bool sfp_module_supported(const struct sfp_eeprom_id *id)
 {
-	return id->base.phys_id == SFF8024_ID_SFP &&
-	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
+	if (id->base.phys_id == SFF8024_ID_SFP &&
+	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP)
+		return true;
+
+	/* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored
+	 * phys id SFF instead of SFP. Therefore mark this module explicitly
+	 * as supported based on vendor name and pn match.
+	 */
+	if (id->base.phys_id == SFF8024_ID_SFF_8472 &&
+	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP &&
+	    !memcmp(id->base.vendor_name, "UBNT            ", 16) &&
+	    !memcmp(id->base.vendor_pn, "UF-INSTANT      ", 16))
+		return true;
+
+	return false;
 }
 
 static const struct sff_data sfp_data = {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 17/67] Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk
  2021-02-24 12:49 ` Sasha Levin
                   ` (15 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Abhishek Pandit-Subedi, Marcel Holtmann,
	Sasha Levin, linux-bluetooth, netdev

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 219991e6be7f4a31d471611e265b72f75b2d0538 ]

Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices,
completely drop from the bus on a system-suspend. These devices will
have their driver unbound and rebound on resume (when the dropping of
the bus gets detected) and will show up as a new HCI after resume.

These devices do not benefit from the suspend / resume handling work done
by the hci_suspend_notifier. At best this unnecessarily adds some time to
the suspend/resume time. But this may also actually cause problems, if the
code doing the driver unbinding runs after the pm-notifier then the
hci_suspend_notifier code will try to talk to a device which is now in
an uninitialized state.

This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows
drivers to opt-out of the hci_suspend_notifier when they know beforehand
that their device will be fully re-initialized / reprobed on resume.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h |  8 ++++++++
 net/bluetooth/hci_core.c    | 18 +++++++++++-------
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c1504aa3d9cfd..ba2f439bc04d3 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -238,6 +238,14 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_ERR_DATA_REPORTING,
+
+	/*
+	 * When this quirk is set, then the hci_suspend_notifier is not
+	 * registered. This is intended for devices which drop completely
+	 * from the bus on system-suspend and which will show up as a new
+	 * HCI after resume.
+	 */
+	HCI_QUIRK_NO_SUSPEND_NOTIFIER,
 };
 
 /* HCI device flags */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1c793e6eb92ae..7348394e0bb87 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3828,10 +3828,12 @@ int hci_register_dev(struct hci_dev *hdev)
 	hci_sock_dev_event(hdev, HCI_DEV_REG);
 	hci_dev_hold(hdev);
 
-	hdev->suspend_notifier.notifier_call = hci_suspend_notifier;
-	error = register_pm_notifier(&hdev->suspend_notifier);
-	if (error)
-		goto err_wqueue;
+	if (!test_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks)) {
+		hdev->suspend_notifier.notifier_call = hci_suspend_notifier;
+		error = register_pm_notifier(&hdev->suspend_notifier);
+		if (error)
+			goto err_wqueue;
+	}
 
 	queue_work(hdev->req_workqueue, &hdev->power_on);
 
@@ -3866,9 +3868,11 @@ void hci_unregister_dev(struct hci_dev *hdev)
 
 	cancel_work_sync(&hdev->power_on);
 
-	hci_suspend_clear_tasks(hdev);
-	unregister_pm_notifier(&hdev->suspend_notifier);
-	cancel_work_sync(&hdev->suspend_prepare);
+	if (!test_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks)) {
+		hci_suspend_clear_tasks(hdev);
+		unregister_pm_notifier(&hdev->suspend_notifier);
+		cancel_work_sync(&hdev->suspend_prepare);
+	}
 
 	hci_dev_do_close(hdev);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 18/67] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data
  2021-02-24 12:49 ` Sasha Levin
                   ` (16 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gopal Tiwari, Marcel Holtmann, Sasha Levin, linux-bluetooth, netdev

From: Gopal Tiwari <gtiwari@redhat.com>

[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ]

kernel panic trace looks like:

 #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
    [exception RIP: amp_read_loc_assoc_final_data+63]
    RIP: ffffffffc06ab54f  RSP: ffffb9e08698fd68  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff8c8845a5a000  RCX: 0000000000000004
    RDX: 0000000000000000  RSI: ffff8c8b9153d000  RDI: ffff8c8845a5a000
    RBP: ffffb9e08698fe40   R8: 00000000000330e0   R9: ffffffffc0675c94
    R10: ffffb9e08698fe58  R11: 0000000000000001  R12: ffff8c8b9cbf6200
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff8c8b2026da0b
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
 #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
 #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7

hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data

        set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);

Fixed by checking NULL for mgr.

Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/amp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c
index 9c711f0dfae35..be2d469d6369d 100644
--- a/net/bluetooth/amp.c
+++ b/net/bluetooth/amp.c
@@ -297,6 +297,9 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
 	struct hci_request req;
 	int err;
 
+	if (!mgr)
+		return;
+
 	cp.phy_handle = hcon->handle;
 	cp.len_so_far = cpu_to_le16(0);
 	cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 19/67] staging: most: sound: add sanity check for function argument
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Christian Gromm, Dan Carpenter, Greg Kroah-Hartman, Sasha Levin, devel

From: Christian Gromm <christian.gromm@microchip.com>

[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/most/sound/sound.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/most/sound/sound.c b/drivers/staging/most/sound/sound.c
index 3a1a590580427..45befb8c11268 100644
--- a/drivers/staging/most/sound/sound.c
+++ b/drivers/staging/most/sound/sound.c
@@ -86,6 +86,8 @@ static void swap_copy24(u8 *dest, const u8 *source, unsigned int bytes)
 {
 	unsigned int i = 0;
 
+	if (bytes < 2)
+		return;
 	while (i < bytes - 2) {
 		dest[i] = source[i + 2];
 		dest[i + 1] = source[i + 1];
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 19/67] staging: most: sound: add sanity check for function argument
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Christian Gromm, devel, Dan Carpenter, Greg Kroah-Hartman

From: Christian Gromm <christian.gromm@microchip.com>

[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/most/sound/sound.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/most/sound/sound.c b/drivers/staging/most/sound/sound.c
index 3a1a590580427..45befb8c11268 100644
--- a/drivers/staging/most/sound/sound.c
+++ b/drivers/staging/most/sound/sound.c
@@ -86,6 +86,8 @@ static void swap_copy24(u8 *dest, const u8 *source, unsigned int bytes)
 {
 	unsigned int i = 0;
 
+	if (bytes < 2)
+		return;
 	while (i < bytes - 2) {
 		dest[i] = source[i + 2];
 		dest[i + 1] = source[i + 1];
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 20/67] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juerg Haefliger, Juerg Haefliger, Greg Kroah-Hartman,
	Sasha Levin, devel, bcm-kernel-feedback-list, linux-rpi-kernel,
	linux-arm-kernel

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +-
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c     | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 4c2cae99776b9..3703409715dab 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
 {
 	int err;
 
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl);
 	if (err < 0)
 		return err;
@@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
 
 int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl),
 			   snd_bcm2835_headphones_ctl);
 }
@@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
 
 int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi),
 			   snd_bcm2835_hdmi);
 }
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f783b632141b5..096f2c54258aa 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 
 	pcm->private_data = chip;
 	pcm->nonatomic = true;
-	strcpy(pcm->name, name);
+	strscpy(pcm->name, name, sizeof(pcm->name));
 	if (!spdif) {
 		chip->dest = route;
 		chip->volume = 0;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index cf5f80f5ca6b0..c250fbef2fa3d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev,
 		goto error;
 	}
 
-	strcpy(card->driver, audio_driver->driver.name);
-	strcpy(card->shortname, audio_driver->shortname);
-	strcpy(card->longname, audio_driver->longname);
+	strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver));
+	strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname));
+	strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
 
 	err = audio_driver->newpcm(chip, audio_driver->shortname,
 		audio_driver->route,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 20/67] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devel, Greg Kroah-Hartman, Juerg Haefliger,
	bcm-kernel-feedback-list, linux-rpi-kernel, Juerg Haefliger,
	linux-arm-kernel

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +-
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c     | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 4c2cae99776b9..3703409715dab 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
 {
 	int err;
 
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl);
 	if (err < 0)
 		return err;
@@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
 
 int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl),
 			   snd_bcm2835_headphones_ctl);
 }
@@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
 
 int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi),
 			   snd_bcm2835_hdmi);
 }
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f783b632141b5..096f2c54258aa 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 
 	pcm->private_data = chip;
 	pcm->nonatomic = true;
-	strcpy(pcm->name, name);
+	strscpy(pcm->name, name, sizeof(pcm->name));
 	if (!spdif) {
 		chip->dest = route;
 		chip->volume = 0;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index cf5f80f5ca6b0..c250fbef2fa3d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev,
 		goto error;
 	}
 
-	strcpy(card->driver, audio_driver->driver.name);
-	strcpy(card->shortname, audio_driver->shortname);
-	strcpy(card->longname, audio_driver->longname);
+	strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver));
+	strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname));
+	strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
 
 	err = audio_driver->newpcm(chip, audio_driver->shortname,
 		audio_driver->route,
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 20/67] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devel, Greg Kroah-Hartman, Juerg Haefliger,
	bcm-kernel-feedback-list, linux-rpi-kernel, Juerg Haefliger,
	linux-arm-kernel

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +-
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c     | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 4c2cae99776b9..3703409715dab 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
 {
 	int err;
 
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl);
 	if (err < 0)
 		return err;
@@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
 
 int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl),
 			   snd_bcm2835_headphones_ctl);
 }
@@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
 
 int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi),
 			   snd_bcm2835_hdmi);
 }
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f783b632141b5..096f2c54258aa 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 
 	pcm->private_data = chip;
 	pcm->nonatomic = true;
-	strcpy(pcm->name, name);
+	strscpy(pcm->name, name, sizeof(pcm->name));
 	if (!spdif) {
 		chip->dest = route;
 		chip->volume = 0;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index cf5f80f5ca6b0..c250fbef2fa3d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev,
 		goto error;
 	}
 
-	strcpy(card->driver, audio_driver->driver.name);
-	strcpy(card->shortname, audio_driver->shortname);
-	strcpy(card->longname, audio_driver->longname);
+	strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver));
+	strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname));
+	strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
 
 	err = audio_driver->newpcm(chip, audio_driver->shortname,
 		audio_driver->route,
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 21/67] net: ipa: avoid field overflow
  2021-02-24 12:49 ` Sasha Levin
                   ` (19 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Alex Elder, Jakub Kicinski, Sasha Levin, netdev

From: Alex Elder <elder@linaro.org>

[ Upstream commit cd1150098f2cc7bd05740c105488c293f6761f5a ]

It's possible that the length passed to ipa_header_size_encoded()
is larger than what can be represented by the HDR_LEN field alone
(starting with IPA v4.5).  If we attempted that, u32_encode_bits()
would trigger a build-time error.

Avoid this problem by masking off high-order bits of the value
encoded as the lower portion of the header length.

The same sort of problem exists in ipa_metadata_offset_encoded(),
so implement the same fix there.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipa/ipa_reg.h | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ipa/ipa_reg.h b/drivers/net/ipa/ipa_reg.h
index e6b0827a244ec..732e691e9aa62 100644
--- a/drivers/net/ipa/ipa_reg.h
+++ b/drivers/net/ipa/ipa_reg.h
@@ -408,15 +408,18 @@ enum ipa_cs_offload_en {
 static inline u32 ipa_header_size_encoded(enum ipa_version version,
 					  u32 header_size)
 {
+	u32 size = header_size & field_mask(HDR_LEN_FMASK);
 	u32 val;
 
-	val = u32_encode_bits(header_size, HDR_LEN_FMASK);
-	if (version < IPA_VERSION_4_5)
+	val = u32_encode_bits(size, HDR_LEN_FMASK);
+	if (version < IPA_VERSION_4_5) {
+		/* ipa_assert(header_size == size); */
 		return val;
+	}
 
 	/* IPA v4.5 adds a few more most-significant bits */
-	header_size >>= hweight32(HDR_LEN_FMASK);
-	val |= u32_encode_bits(header_size, HDR_LEN_MSB_FMASK);
+	size = header_size >> hweight32(HDR_LEN_FMASK);
+	val |= u32_encode_bits(size, HDR_LEN_MSB_FMASK);
 
 	return val;
 }
@@ -425,15 +428,18 @@ static inline u32 ipa_header_size_encoded(enum ipa_version version,
 static inline u32 ipa_metadata_offset_encoded(enum ipa_version version,
 					      u32 offset)
 {
+	u32 off = offset & field_mask(HDR_OFST_METADATA_FMASK);
 	u32 val;
 
-	val = u32_encode_bits(offset, HDR_OFST_METADATA_FMASK);
-	if (version < IPA_VERSION_4_5)
+	val = u32_encode_bits(off, HDR_OFST_METADATA_FMASK);
+	if (version < IPA_VERSION_4_5) {
+		/* ipa_assert(offset == off); */
 		return val;
+	}
 
 	/* IPA v4.5 adds a few more most-significant bits */
-	offset >>= hweight32(HDR_OFST_METADATA_FMASK);
-	val |= u32_encode_bits(offset, HDR_OFST_METADATA_MSB_FMASK);
+	off = offset >> hweight32(HDR_OFST_METADATA_FMASK);
+	val |= u32_encode_bits(off, HDR_OFST_METADATA_MSB_FMASK);
 
 	return val;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 22/67] brcmfmac: Add DMI nvram filename quirk for Predia Basic tablet
  2021-02-24 12:49 ` Sasha Levin
                   ` (20 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Kalle Valo, Sasha Levin, linux-wireless,
	brcm80211-dev-list.pdl, SHA-cyfmac-dev-list, netdev

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit af4b3a6f36d6c2fc5fca026bccf45e0fdcabddd9 ]

The Predia Basic tablet contains quite generic names in the sys_vendor and
product_name DMI strings, without this patch brcmfmac will try to load:
brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit
too generic.

Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Predia Basic tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
index 4aa2561934d77..824a79f243830 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
@@ -40,6 +40,10 @@ static const struct brcmf_dmi_data pov_tab_p1006w_data = {
 	BRCM_CC_43340_CHIP_ID, 2, "pov-tab-p1006w-data"
 };
 
+static const struct brcmf_dmi_data predia_basic_data = {
+	BRCM_CC_43341_CHIP_ID, 2, "predia-basic"
+};
+
 static const struct dmi_system_id dmi_platform_data[] = {
 	{
 		/* ACEPC T8 Cherry Trail Z8350 mini PC */
@@ -111,6 +115,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		},
 		.driver_data = (void *)&pov_tab_p1006w_data,
 	},
+	{
+		/* Predia Basic tablet (+ with keyboard dock) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
+			/* Mx.WT107.KUBNGEA02 with the version-nr dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Mx.WT107.KUBNGEA"),
+		},
+		.driver_data = (void *)&predia_basic_data,
+	},
 	{}
 };
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 23/67] brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tablet
  2021-02-24 12:49 ` Sasha Levin
                   ` (21 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Kalle Valo, Sasha Levin, linux-wireless,
	brcm80211-dev-list.pdl, SHA-cyfmac-dev-list, netdev

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit a338c874d3d9d2463f031e89ae14942929b93db6 ]

The Voyo winpad A15 tablet contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt
as nvram file which is a bit too generic.

Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Voyo winpad A15 tablet.

While preparing a matching linux-firmware update I noticed that the nvram
is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI
quirk entry simply points to the already existing Prowise-PT301 nvram file.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/dmi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
index 824a79f243830..6d5188b78f2de 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
@@ -44,6 +44,14 @@ static const struct brcmf_dmi_data predia_basic_data = {
 	BRCM_CC_43341_CHIP_ID, 2, "predia-basic"
 };
 
+/* Note the Voyo winpad A15 tablet uses the same Ampak AP6330 module, with the
+ * exact same nvram file as the Prowise-PT301 tablet. Since the nvram for the
+ * Prowise-PT301 is already in linux-firmware we just point to that here.
+ */
+static const struct brcmf_dmi_data voyo_winpad_a15_data = {
+	BRCM_CC_4330_CHIP_ID, 4, "Prowise-PT301"
+};
+
 static const struct dmi_system_id dmi_platform_data[] = {
 	{
 		/* ACEPC T8 Cherry Trail Z8350 mini PC */
@@ -125,6 +133,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		},
 		.driver_data = (void *)&predia_basic_data,
 	},
+	{
+		/* Voyo winpad A15 tablet */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)&voyo_winpad_a15_data,
+	},
 	{}
 };
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 24/67] wilc1000: Fix use of void pointer as a wrong struct type
  2021-02-24 12:49 ` Sasha Levin
                   ` (22 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vsevolod Kozlov, Kalle Valo, Sasha Levin, linux-wireless, netdev

From: Vsevolod Kozlov <zaba@mm.st>

[ Upstream commit 6fe91b69ceceea832a73d35185df04b3e877f399 ]

ac_classify() expects a struct sk_buff* as its second argument, which is
a member of struct tx_complete_data. priv happens to be a pointer to
struct tx_complete_data, so passing it directly to ac_classify() leads
to wrong behaviour and occasional panics.

Since there is only one caller of wilc_wlan_txq_add_net_pkt and it
already knows the type behind this pointer, and the structure is already
in the header file, change the function signature to use the real type
instead of void* in order to prevent confusion.

Signed-off-by: Vsevolod Kozlov <zaba@mm.st>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YCQomJ1mO5BLxYOT@Vsevolods-Mini.lan
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/netdev.c |  2 +-
 drivers/net/wireless/microchip/wilc1000/wlan.c   | 15 ++++++++-------
 drivers/net/wireless/microchip/wilc1000/wlan.h   |  3 ++-
 3 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 2a1fbbdd6a4bd..0c188310919e1 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -737,7 +737,7 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	vif->netstats.tx_packets++;
 	vif->netstats.tx_bytes += tx_data->size;
-	queue_count = wilc_wlan_txq_add_net_pkt(ndev, (void *)tx_data,
+	queue_count = wilc_wlan_txq_add_net_pkt(ndev, tx_data,
 						tx_data->buff, tx_data->size,
 						wilc_tx_complete);
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index c12f27be9f790..31d51385ba934 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -408,7 +408,8 @@ static inline u8 ac_change(struct wilc *wilc, u8 *ac)
 	return 1;
 }
 
-int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
+int wilc_wlan_txq_add_net_pkt(struct net_device *dev,
+			      struct tx_complete_data *tx_data, u8 *buffer,
 			      u32 buffer_size,
 			      void (*tx_complete_fn)(void *, int))
 {
@@ -420,27 +421,27 @@ int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
 	wilc = vif->wilc;
 
 	if (wilc->quit) {
-		tx_complete_fn(priv, 0);
+		tx_complete_fn(tx_data, 0);
 		return 0;
 	}
 
 	tqe = kmalloc(sizeof(*tqe), GFP_ATOMIC);
 
 	if (!tqe) {
-		tx_complete_fn(priv, 0);
+		tx_complete_fn(tx_data, 0);
 		return 0;
 	}
 	tqe->type = WILC_NET_PKT;
 	tqe->buffer = buffer;
 	tqe->buffer_size = buffer_size;
 	tqe->tx_complete_func = tx_complete_fn;
-	tqe->priv = priv;
+	tqe->priv = tx_data;
 	tqe->vif = vif;
 
-	q_num = ac_classify(wilc, priv);
+	q_num = ac_classify(wilc, tx_data->skb);
 	tqe->q_num = q_num;
 	if (ac_change(wilc, &q_num)) {
-		tx_complete_fn(priv, 0);
+		tx_complete_fn(tx_data, 0);
 		kfree(tqe);
 		return 0;
 	}
@@ -451,7 +452,7 @@ int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
 			tcp_process(dev, tqe);
 		wilc_wlan_txq_add_to_tail(dev, q_num, tqe);
 	} else {
-		tx_complete_fn(priv, 0);
+		tx_complete_fn(tx_data, 0);
 		kfree(tqe);
 	}
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 3d2104f198192..d55eb6b3a12a9 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -399,7 +399,8 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 				u32 buffer_size);
 int wilc_wlan_start(struct wilc *wilc);
 int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif);
-int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
+int wilc_wlan_txq_add_net_pkt(struct net_device *dev,
+			      struct tx_complete_data *tx_data, u8 *buffer,
 			      u32 buffer_size,
 			      void (*tx_complete_fn)(void *, int));
 int wilc_wlan_handle_txq(struct wilc *wl, u32 *txq_count);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 25/67] drm/hisilicon: Fix use-after-free
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Tian Tao, Thomas Zimmermann, Sasha Levin, dri-devel

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit c855af2f9c5c60760fd1bed7889a81bc37d2591d ]

Fix the problem of dev being released twice.
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : refcount_warn_saturate+0xd4/0x150
lr : refcount_warn_saturate+0xd4/0x150
sp : ffff2028150cbc00
x29: ffff2028150cbc00 x28: ffff2028150121c0
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000003
x23: 0000000000000000 x22: ffff2028150cbc90
x21: ffff2020038a30a8 x20: ffff2028150cbc90
x19: ffff0020cd938020 x18: 0000000000000010
x17: 0000000000000000 x16: 0000000000000000
x15: ffffffffffffffff x14: ffff2028950cb88f
x13: ffff2028150cb89d x12: 0000000000000000
x11: 0000000005f5e0ff x10: ffff2028150cb800
x9 : 00000000ffffffd0 x8 : 75203b776f6c6672
x7 : ffff800011a6f7c8 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff202ffe2f9dc0
x1 : ffffa02fecf40000 x0 : 0000000000000026
Call trace:
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
Call trace:
 dump_backtrace+0x0/0x208
 show_stack+0x2c/0x40
 dump_stack+0xd8/0x10c
 __warn+0xac/0x128
 report_bug+0xcc/0x180
 bug_handler+0x24/0x78
 call_break_hook+0x80/0xa0
 brk_handler+0x28/0x68
 do_debug_exception+0x9c/0x148
 el1_sync_handler+0x7c/0x128
 el1_sync+0x80/0x100
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
---[ end trace 00718630d6e5ff18 ]---

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index d845657fd99cc..426f5fb20fadc 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -366,7 +366,6 @@ static void hibmc_pci_remove(struct pci_dev *pdev)
 
 	drm_dev_unregister(dev);
 	hibmc_unload(dev);
-	drm_dev_put(dev);
 }
 
 static const struct pci_device_id hibmc_pci_table[] = {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 25/67] drm/hisilicon: Fix use-after-free
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Tian Tao, dri-devel, Thomas Zimmermann

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit c855af2f9c5c60760fd1bed7889a81bc37d2591d ]

Fix the problem of dev being released twice.
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : refcount_warn_saturate+0xd4/0x150
lr : refcount_warn_saturate+0xd4/0x150
sp : ffff2028150cbc00
x29: ffff2028150cbc00 x28: ffff2028150121c0
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000003
x23: 0000000000000000 x22: ffff2028150cbc90
x21: ffff2020038a30a8 x20: ffff2028150cbc90
x19: ffff0020cd938020 x18: 0000000000000010
x17: 0000000000000000 x16: 0000000000000000
x15: ffffffffffffffff x14: ffff2028950cb88f
x13: ffff2028150cb89d x12: 0000000000000000
x11: 0000000005f5e0ff x10: ffff2028150cb800
x9 : 00000000ffffffd0 x8 : 75203b776f6c6672
x7 : ffff800011a6f7c8 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff202ffe2f9dc0
x1 : ffffa02fecf40000 x0 : 0000000000000026
Call trace:
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
Call trace:
 dump_backtrace+0x0/0x208
 show_stack+0x2c/0x40
 dump_stack+0xd8/0x10c
 __warn+0xac/0x128
 report_bug+0xcc/0x180
 bug_handler+0x24/0x78
 call_break_hook+0x80/0xa0
 brk_handler+0x28/0x68
 do_debug_exception+0x9c/0x148
 el1_sync_handler+0x7c/0x128
 el1_sync+0x80/0x100
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
---[ end trace 00718630d6e5ff18 ]---

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index d845657fd99cc..426f5fb20fadc 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -366,7 +366,6 @@ static void hibmc_pci_remove(struct pci_dev *pdev)
 
 	drm_dev_unregister(dev);
 	hibmc_unload(dev);
-	drm_dev_put(dev);
 }
 
 static const struct pci_device_id hibmc_pci_table[] = {
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 26/67] udlfb: Fix memory leak in dlfb_usb_probe
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Zqiang, syzbot+c9e365d7f450e8aa615d, Daniel Vetter, Sasha Levin,
	linux-fbdev, dri-devel

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 5c0e4110f751934e748a66887c61f8e73805f0f9 ]

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/udlfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index f9b3c1cb9530f..b9cdd02c10009 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1017,6 +1017,7 @@ static void dlfb_ops_destroy(struct fb_info *info)
 	}
 	vfree(dlfb->backing_buffer);
 	kfree(dlfb->edid);
+	dlfb_free_urb_list(dlfb);
 	usb_put_dev(dlfb->udev);
 	kfree(dlfb);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 26/67] udlfb: Fix memory leak in dlfb_usb_probe
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-fbdev, syzbot+c9e365d7f450e8aa615d, dri-devel,
	Zqiang, Daniel Vetter

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 5c0e4110f751934e748a66887c61f8e73805f0f9 ]

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/udlfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index f9b3c1cb9530f..b9cdd02c10009 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1017,6 +1017,7 @@ static void dlfb_ops_destroy(struct fb_info *info)
 	}
 	vfree(dlfb->backing_buffer);
 	kfree(dlfb->edid);
+	dlfb_free_urb_list(dlfb);
 	usb_put_dev(dlfb->udev);
 	kfree(dlfb);
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 27/67] JFS: more checks for invalid superblock
  2021-02-24 12:49 ` Sasha Levin
                   ` (25 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Randy Dunlap, syzbot+36315852ece4132ec193, kernel test robot,
	Dave Kleikamp, jfs-discussion, Sasha Levin

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 3bef198f1b17d1bb89260bad947ef084c0a2d1a6 ]

syzbot is feeding invalid superblock data to JFS for mount testing.
JFS does not check several of the fields -- just assumes that they
are good since the JFS_MAGIC and version fields are good.

In this case (syzbot reproducer), we have s_l2bsize == 0xda0c,
pad == 0xf045, and s_state == 0x50, all of which are invalid IMO.
Having s_l2bsize == 0xda0c causes this UBSAN warning:
  UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25
  shift exponent -9716 is negative

s_l2bsize can be tested for correctness. pad can be tested for non-0
and punted. s_state can be tested for its valid values and punted.

Do those 3 tests and if any of them fails, report the superblock as
invalid/corrupt and let fsck handle it.

With this patch, chkSuper() says this when JFS_DEBUG is enabled:
  jfs_mount: Mount Failure: superblock is corrupt!
  Mount JFS Failure: -22
  jfs_mount failed w/return code = -22

The obvious problem with this method is that next week there could
be another syzbot test that uses different fields for invalid values,
this making this like a game of whack-a-mole.

syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193

Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com
Reported-by: kernel test robot <lkp@intel.com> # v2
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_filsys.h |  1 +
 fs/jfs/jfs_mount.c  | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/fs/jfs/jfs_filsys.h b/fs/jfs/jfs_filsys.h
index 1e899298f7f00..b5d702df7111a 100644
--- a/fs/jfs/jfs_filsys.h
+++ b/fs/jfs/jfs_filsys.h
@@ -268,5 +268,6 @@
 				 * fsck() must be run to repair
 				 */
 #define	FM_EXTENDFS 0x00000008	/* file system extendfs() in progress */
+#define	FM_STATE_MAX 0x0000000f	/* max value of s_state */
 
 #endif				/* _H_JFS_FILSYS */
diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c
index 2935d4c776ec7..5d7d7170c03c0 100644
--- a/fs/jfs/jfs_mount.c
+++ b/fs/jfs/jfs_mount.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
 #include <linux/blkdev.h>
+#include <linux/log2.h>
 
 #include "jfs_incore.h"
 #include "jfs_filsys.h"
@@ -366,6 +367,15 @@ static int chkSuper(struct super_block *sb)
 	sbi->bsize = bsize;
 	sbi->l2bsize = le16_to_cpu(j_sb->s_l2bsize);
 
+	/* check some fields for possible corruption */
+	if (sbi->l2bsize != ilog2((u32)bsize) ||
+	    j_sb->pad != 0 ||
+	    le32_to_cpu(j_sb->s_state) > FM_STATE_MAX) {
+		rc = -EINVAL;
+		jfs_err("jfs_mount: Mount Failure: superblock is corrupt!");
+		goto out;
+	}
+
 	/*
 	 * For now, ignore s_pbsize, l2bfactor.  All I/O going through buffer
 	 * cache.
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 28/67] crypto: tcrypt - avoid signed overflow in byte count
  2021-02-24 12:49 ` Sasha Levin
                   ` (26 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ard Biesheuvel, Herbert Xu, Sasha Levin, linux-crypto

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 303fd3e1c771077e32e96e5788817f025f0067e2 ]

The signed long type used for printing the number of bytes processed in
tcrypt benchmarks limits the range to -/+ 2 GiB, which is not sufficient
to cover the performance of common accelerated ciphers such as AES-NI
when benchmarked with sec=1. So switch to u64 instead.

While at it, fix up a missing printk->pr_cont conversion in the AEAD
benchmark.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/tcrypt.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index a647bb298fbce..a4a11d2b57bd8 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -199,8 +199,8 @@ static int test_mb_aead_jiffies(struct test_mb_aead_data *data, int enc,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -471,8 +471,8 @@ static int test_aead_jiffies(struct aead_request *req, int enc,
 			return ret;
 	}
 
-	printk("%d operations in %d seconds (%ld bytes)\n",
-	       bcount, secs, (long)bcount * blen);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+	        bcount, secs, (u64)bcount * blen);
 	return 0;
 }
 
@@ -764,8 +764,8 @@ static int test_mb_ahash_jiffies(struct test_mb_ahash_data *data, int blen,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -1201,8 +1201,8 @@ static int test_mb_acipher_jiffies(struct test_mb_skcipher_data *data, int enc,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -1441,8 +1441,8 @@ static int test_acipher_jiffies(struct skcipher_request *req, int enc,
 			return ret;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount, secs, (long)bcount * blen);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount, secs, (u64)bcount * blen);
 	return 0;
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 29/67] fs: make unlazy_walk() error handling consistent
  2021-02-24 12:49 ` Sasha Levin
                   ` (27 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jens Axboe, Al Viro, Sasha Levin, linux-fsdevel

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit e36cffed20a324e116f329a94061ae30dd26fb51 ]

Most callers check for non-zero return, and assume it's -ECHILD (which
it always will be). One caller uses the actual error return. Clean this
up and make it fully consistent, by having unlazy_walk() return a bool
instead. Rename it to try_to_unlazy() and return true on success, and
failure on error. That's easier to read.

No functional changes in this patch.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/namei.c | 43 +++++++++++++++++--------------------------
 1 file changed, 17 insertions(+), 26 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 78443a85480a5..dd85e12ac85a6 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -669,17 +669,17 @@ static bool legitimize_root(struct nameidata *nd)
  */
 
 /**
- * unlazy_walk - try to switch to ref-walk mode.
+ * try_to_unlazy - try to switch to ref-walk mode.
  * @nd: nameidata pathwalk data
- * Returns: 0 on success, -ECHILD on failure
+ * Returns: true on success, false on failure
  *
- * unlazy_walk attempts to legitimize the current nd->path and nd->root
+ * try_to_unlazy attempts to legitimize the current nd->path and nd->root
  * for ref-walk mode.
  * Must be called from rcu-walk context.
- * Nothing should touch nameidata between unlazy_walk() failure and
+ * Nothing should touch nameidata between try_to_unlazy() failure and
  * terminate_walk().
  */
-static int unlazy_walk(struct nameidata *nd)
+static bool try_to_unlazy(struct nameidata *nd)
 {
 	struct dentry *parent = nd->path.dentry;
 
@@ -694,14 +694,14 @@ static int unlazy_walk(struct nameidata *nd)
 		goto out;
 	rcu_read_unlock();
 	BUG_ON(nd->inode != parent->d_inode);
-	return 0;
+	return true;
 
 out1:
 	nd->path.mnt = NULL;
 	nd->path.dentry = NULL;
 out:
 	rcu_read_unlock();
-	return -ECHILD;
+	return false;
 }
 
 /**
@@ -792,7 +792,7 @@ static int complete_walk(struct nameidata *nd)
 		 */
 		if (!(nd->flags & (LOOKUP_ROOT | LOOKUP_IS_SCOPED)))
 			nd->root.mnt = NULL;
-		if (unlikely(unlazy_walk(nd)))
+		if (!try_to_unlazy(nd))
 			return -ECHILD;
 	}
 
@@ -1466,7 +1466,7 @@ static struct dentry *lookup_fast(struct nameidata *nd,
 		unsigned seq;
 		dentry = __d_lookup_rcu(parent, &nd->last, &seq);
 		if (unlikely(!dentry)) {
-			if (unlazy_walk(nd))
+			if (!try_to_unlazy(nd))
 				return ERR_PTR(-ECHILD);
 			return NULL;
 		}
@@ -1567,10 +1567,8 @@ static inline int may_lookup(struct nameidata *nd)
 {
 	if (nd->flags & LOOKUP_RCU) {
 		int err = inode_permission(nd->inode, MAY_EXEC|MAY_NOT_BLOCK);
-		if (err != -ECHILD)
+		if (err != -ECHILD || !try_to_unlazy(nd))
 			return err;
-		if (unlazy_walk(nd))
-			return -ECHILD;
 	}
 	return inode_permission(nd->inode, MAY_EXEC);
 }
@@ -1592,7 +1590,7 @@ static int reserve_stack(struct nameidata *nd, struct path *link, unsigned seq)
 		// unlazy even if we fail to grab the link - cleanup needs it
 		bool grabbed_link = legitimize_path(nd, link, seq);
 
-		if (unlazy_walk(nd) != 0 || !grabbed_link)
+		if (!try_to_unlazy(nd) != 0 || !grabbed_link)
 			return -ECHILD;
 
 		if (nd_alloc_stack(nd))
@@ -1634,7 +1632,7 @@ static const char *pick_link(struct nameidata *nd, struct path *link,
 		touch_atime(&last->link);
 		cond_resched();
 	} else if (atime_needs_update(&last->link, inode)) {
-		if (unlikely(unlazy_walk(nd)))
+		if (!try_to_unlazy(nd))
 			return ERR_PTR(-ECHILD);
 		touch_atime(&last->link);
 	}
@@ -1651,11 +1649,8 @@ static const char *pick_link(struct nameidata *nd, struct path *link,
 		get = inode->i_op->get_link;
 		if (nd->flags & LOOKUP_RCU) {
 			res = get(NULL, inode, &last->done);
-			if (res == ERR_PTR(-ECHILD)) {
-				if (unlikely(unlazy_walk(nd)))
-					return ERR_PTR(-ECHILD);
+			if (res == ERR_PTR(-ECHILD) && try_to_unlazy(nd))
 				res = get(link->dentry, inode, &last->done);
-			}
 		} else {
 			res = get(link->dentry, inode, &last->done);
 		}
@@ -2195,7 +2190,7 @@ static int link_path_walk(const char *name, struct nameidata *nd)
 		}
 		if (unlikely(!d_can_lookup(nd->path.dentry))) {
 			if (nd->flags & LOOKUP_RCU) {
-				if (unlazy_walk(nd))
+				if (!try_to_unlazy(nd))
 					return -ECHILD;
 			}
 			return -ENOTDIR;
@@ -3129,7 +3124,6 @@ static const char *open_last_lookups(struct nameidata *nd,
 	struct inode *inode;
 	struct dentry *dentry;
 	const char *res;
-	int error;
 
 	nd->flags |= op->intent;
 
@@ -3153,9 +3147,8 @@ static const char *open_last_lookups(struct nameidata *nd,
 	} else {
 		/* create side of things */
 		if (nd->flags & LOOKUP_RCU) {
-			error = unlazy_walk(nd);
-			if (unlikely(error))
-				return ERR_PTR(error);
+			if (!try_to_unlazy(nd))
+				return ERR_PTR(-ECHILD);
 		}
 		audit_inode(nd->name, dir, AUDIT_INODE_PARENT);
 		/* trailing slashes? */
@@ -3164,9 +3157,7 @@ static const char *open_last_lookups(struct nameidata *nd,
 	}
 
 	if (open_flag & (O_CREAT | O_TRUNC | O_WRONLY | O_RDWR)) {
-		error = mnt_want_write(nd->path.mnt);
-		if (!error)
-			got_write = true;
+		got_write = !mnt_want_write(nd->path.mnt);
 		/*
 		 * do _not_ fail yet - we might not need that or fail with
 		 * a different error; let lookup_open() decide; we'll be
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 30/67] sched/core: Allow try_invoke_on_locked_down_task() with irqs disabled
  2021-02-24 12:49 ` Sasha Levin
                   ` (28 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Peter Zijlstra, syzbot+cb3b69ae80afd6535b0e, Paul E . McKenney,
	Sasha Levin

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 1b7af295541d75535374325fd617944534853919 ]

The try_invoke_on_locked_down_task() function currently requires
that interrupts be enabled, but it is called with interrupts
disabled from rcu_print_task_stall(), resulting in an "IRQs not
enabled as expected" diagnostic.  This commit therefore updates
try_invoke_on_locked_down_task() to use raw_spin_lock_irqsave() instead
of raw_spin_lock_irq(), thus allowing use from either context.

Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/
Link: https://lore.kernel.org/lkml/20200928075729.GC2611@hirez.programming.kicks-ass.net/
Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index ff74fca39ed21..22f6748c16f68 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3478,7 +3478,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
 
 /**
  * try_invoke_on_locked_down_task - Invoke a function on task in fixed state
- * @p: Process for which the function is to be invoked.
+ * @p: Process for which the function is to be invoked, can be @current.
  * @func: Function to invoke.
  * @arg: Argument to function.
  *
@@ -3496,12 +3496,11 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
  */
 bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct task_struct *t, void *arg), void *arg)
 {
-	bool ret = false;
 	struct rq_flags rf;
+	bool ret = false;
 	struct rq *rq;
 
-	lockdep_assert_irqs_enabled();
-	raw_spin_lock_irq(&p->pi_lock);
+	raw_spin_lock_irqsave(&p->pi_lock, rf.flags);
 	if (p->on_rq) {
 		rq = __task_rq_lock(p, &rf);
 		if (task_rq(p) == rq)
@@ -3518,7 +3517,7 @@ bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct t
 				ret = func(p, arg);
 		}
 	}
-	raw_spin_unlock_irq(&p->pi_lock);
+	raw_spin_unlock_irqrestore(&p->pi_lock, rf.flags);
 	return ret;
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 31/67] drm/amdgpu: Add check to prevent IH overflow
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Defang Bo, Christian König, Alex Deucher, Sasha Levin,
	amd-gfx, dri-devel

From: Defang Bo <bodefang@126.com>

[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cz_ih.c      | 37 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/tonga_ih.c   | 37 ++++++++++++++++---------
 3 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
index da37f8a900afb..307c01301c87a 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
@@ -194,19 +194,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
index 37d8b6ca4dab8..cc957471f31ea 100644
--- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
@@ -194,19 +194,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
index ce3319993b4bd..249fcbee7871c 100644
--- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
@@ -196,19 +196,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 31/67] drm/amdgpu: Add check to prevent IH overflow
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Defang Bo, amd-gfx, Alex Deucher,
	Christian König

From: Defang Bo <bodefang@126.com>

[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cz_ih.c      | 37 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/tonga_ih.c   | 37 ++++++++++++++++---------
 3 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
index da37f8a900afb..307c01301c87a 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
@@ -194,19 +194,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
index 37d8b6ca4dab8..cc957471f31ea 100644
--- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
@@ -194,19 +194,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
index ce3319993b4bd..249fcbee7871c 100644
--- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
@@ -196,19 +196,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 31/67] drm/amdgpu: Add check to prevent IH overflow
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Defang Bo, amd-gfx, Alex Deucher,
	Christian König

From: Defang Bo <bodefang@126.com>

[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cz_ih.c      | 37 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/tonga_ih.c   | 37 ++++++++++++++++---------
 3 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
index da37f8a900afb..307c01301c87a 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
@@ -194,19 +194,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
index 37d8b6ca4dab8..cc957471f31ea 100644
--- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
@@ -194,19 +194,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
index ce3319993b4bd..249fcbee7871c 100644
--- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
@@ -196,19 +196,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 32/67] PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse
  2021-02-24 12:49 ` Sasha Levin
                   ` (30 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nirmoy Das, Christian König, Bjorn Helgaas, Sasha Levin, linux-pci

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 907830b0fc9e374d00f3c83de5e426157b482c01 ]

RX 5600 XT Pulse advertises support for BAR 0 being 256MB, 512MB,
or 1GB, but it also supports 2GB, 4GB, and 8GB. Add a rebar
size quirk so that the BAR 0 is big enough to cover complete VARM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-5-nirmoy.das@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 790393d1e3189..ba791165ed194 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3596,7 +3596,14 @@ u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar)
 		return 0;
 
 	pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
-	return (cap & PCI_REBAR_CAP_SIZES) >> 4;
+	cap &= PCI_REBAR_CAP_SIZES;
+
+	/* Sapphire RX 5600 XT Pulse has an invalid cap dword for BAR 0 */
+	if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x731f &&
+	    bar == 0 && cap == 0x7000)
+		cap = 0x3f000;
+
+	return cap >> 4;
 }
 
 /**
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 33/67] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Rasmus Porsager, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1851ccf9e155b2a6f6cca1a7bd49325f5efbd5d2 ]

Some devices, like mini PCs/media/top-set boxes do not have any speakers
at all, an example of the is the Mele PCG03 Mini PC.

Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add
speaker routes and modifies the components and the (optional) long_name
strings to reflect that there are no speakers.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 5520d7c800196..dce2df30d4c5b 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -71,6 +71,7 @@ enum {
 #define BYT_RT5640_SSP0_AIF2		BIT(21)
 #define BYT_RT5640_MCLK_EN		BIT(22)
 #define BYT_RT5640_MCLK_25MHZ		BIT(23)
+#define BYT_RT5640_NO_SPEAKERS		BIT(24)
 
 #define BYTCR_INPUT_DEFAULTS				\
 	(BYT_RT5640_IN3_MAP |				\
@@ -132,6 +133,8 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk JD_NOT_INV enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
 		dev_info(dev, "quirk MONO_SPEAKER enabled\n");
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
+		dev_info(dev, "quirk NO_SPEAKERS enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
 		dev_info(dev, "quirk DIFF_MIC enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
@@ -946,7 +949,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_mono_spk_map,
 					ARRAY_SIZE(byt_rt5640_mono_spk_map));
-	} else {
+	} else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) {
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_stereo_spk_map,
 					ARRAY_SIZE(byt_rt5640_stereo_spk_map));
@@ -1188,6 +1191,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" };
+	__maybe_unused const char *spk_type;
 	const struct dmi_system_id *dmi_id;
 	struct byt_rt5640_private *priv;
 	struct snd_soc_acpi_mach *mach;
@@ -1196,7 +1200,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	bool sof_parent;
 	int ret_val = 0;
 	int dai_index = 0;
-	int i;
+	int i, cfg_spk;
 
 	is_bytcr = false;
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -1335,16 +1339,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
+		cfg_spk = 0;
+		spk_type = "none";
+	} else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
+		cfg_spk = 1;
+		spk_type = "mono";
+	} else {
+		cfg_spk = 2;
+		spk_type = "stereo";
+	}
+
 	snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
-		 "cfg-spk:%s cfg-mic:%s",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2",
+		 "cfg-spk:%d cfg-mic:%s", cfg_spk,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.components = byt_rt5640_components;
 #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
 	snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
-		 "bytcr-rt5640-%s-spk-%s-mic",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ?
-			"mono" : "stereo",
+		 "bytcr-rt5640-%s-spk-%s-mic", spk_type,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.long_name = byt_rt5640_long_name;
 #endif
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 33/67] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Rasmus Porsager, Pierre-Louis Bossart,
	Hans de Goede, Mark Brown

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1851ccf9e155b2a6f6cca1a7bd49325f5efbd5d2 ]

Some devices, like mini PCs/media/top-set boxes do not have any speakers
at all, an example of the is the Mele PCG03 Mini PC.

Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add
speaker routes and modifies the components and the (optional) long_name
strings to reflect that there are no speakers.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 5520d7c800196..dce2df30d4c5b 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -71,6 +71,7 @@ enum {
 #define BYT_RT5640_SSP0_AIF2		BIT(21)
 #define BYT_RT5640_MCLK_EN		BIT(22)
 #define BYT_RT5640_MCLK_25MHZ		BIT(23)
+#define BYT_RT5640_NO_SPEAKERS		BIT(24)
 
 #define BYTCR_INPUT_DEFAULTS				\
 	(BYT_RT5640_IN3_MAP |				\
@@ -132,6 +133,8 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk JD_NOT_INV enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
 		dev_info(dev, "quirk MONO_SPEAKER enabled\n");
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
+		dev_info(dev, "quirk NO_SPEAKERS enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
 		dev_info(dev, "quirk DIFF_MIC enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
@@ -946,7 +949,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_mono_spk_map,
 					ARRAY_SIZE(byt_rt5640_mono_spk_map));
-	} else {
+	} else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) {
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_stereo_spk_map,
 					ARRAY_SIZE(byt_rt5640_stereo_spk_map));
@@ -1188,6 +1191,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" };
+	__maybe_unused const char *spk_type;
 	const struct dmi_system_id *dmi_id;
 	struct byt_rt5640_private *priv;
 	struct snd_soc_acpi_mach *mach;
@@ -1196,7 +1200,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	bool sof_parent;
 	int ret_val = 0;
 	int dai_index = 0;
-	int i;
+	int i, cfg_spk;
 
 	is_bytcr = false;
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -1335,16 +1339,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
+		cfg_spk = 0;
+		spk_type = "none";
+	} else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
+		cfg_spk = 1;
+		spk_type = "mono";
+	} else {
+		cfg_spk = 2;
+		spk_type = "stereo";
+	}
+
 	snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
-		 "cfg-spk:%s cfg-mic:%s",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2",
+		 "cfg-spk:%d cfg-mic:%s", cfg_spk,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.components = byt_rt5640_components;
 #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
 	snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
-		 "bytcr-rt5640-%s-spk-%s-mic",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ?
-			"mono" : "stereo",
+		 "bytcr-rt5640-%s-spk-%s-mic", spk_type,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.long_name = byt_rt5640_long_name;
 #endif
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 34/67] ALSA: usb-audio: Add support for Pioneer DJM-750
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Olivia Mackintosh, Takashi Iwai, Sasha Levin, alsa-devel

From: Olivia Mackintosh <livvy@base.nu>

[ Upstream commit b952ac76a20bc0b23cd7e22de19fb407713238a3 ]

This adds the Pioneer DJ DJM-750 to the quirks table and ensures
skip_pioneer_sync_ep() is (also) called: this device uses the vendor
ID of 0x08e4 (I'm not sure why they use multiple vendor IDs but many
just like to be awkward it seems).

Playback on all 8 channels works. I'll likely keep this working in the
future and submit futher patches and improvements as necessary.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210118130621.77miiie47wp7mump@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/implicit.c     |  3 +-
 sound/usb/quirks-table.h | 60 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+), 1 deletion(-)

diff --git a/sound/usb/implicit.c b/sound/usb/implicit.c
index 521cc846d9d9f..e7216d0b860d8 100644
--- a/sound/usb/implicit.c
+++ b/sound/usb/implicit.c
@@ -302,7 +302,8 @@ static int audioformat_implicit_fb_quirk(struct snd_usb_audio *chip,
 	/* Pioneer devices with vendor spec class */
 	if (attr == USB_ENDPOINT_SYNC_ASYNC &&
 	    alts->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
-	    USB_ID_VENDOR(chip->usb_id) == 0x2b73 /* Pioneer */) {
+	    (USB_ID_VENDOR(chip->usb_id) == 0x2b73 || /* Pioneer */
+	     USB_ID_VENDOR(chip->usb_id) == 0x08e4    /* Pioneer */)) {
 		if (skip_pioneer_sync_ep(chip, fmt, alts))
 			return 1;
 	}
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index c8a4bdf18207c..93d55cd1a5a4c 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3757,6 +3757,66 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+{
+	/*
+	 * Pioneer DJ DJM-750
+	 * 8 channels playback & 8 channels capture @ 44.1/48/96kHz S24LE
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x08e4, 0x017f),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x05,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+					    USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_44100|
+						SNDRV_PCM_RATE_48000|
+						SNDRV_PCM_RATE_96000,
+					.rate_min = 44100,
+					.rate_max = 96000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) { 44100, 48000, 96000 }
+				}
+			},
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x86,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC|
+						USB_ENDPOINT_USAGE_IMPLICIT_FB,
+					.rates = SNDRV_PCM_RATE_44100|
+						SNDRV_PCM_RATE_48000|
+						SNDRV_PCM_RATE_96000,
+					.rate_min = 44100,
+					.rate_max = 96000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) { 44100, 48000, 96000 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
 #undef USB_AUDIO_DEVICE
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 34/67] ALSA: usb-audio: Add support for Pioneer DJM-750
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Takashi Iwai, Sasha Levin, alsa-devel, Olivia Mackintosh

From: Olivia Mackintosh <livvy@base.nu>

[ Upstream commit b952ac76a20bc0b23cd7e22de19fb407713238a3 ]

This adds the Pioneer DJ DJM-750 to the quirks table and ensures
skip_pioneer_sync_ep() is (also) called: this device uses the vendor
ID of 0x08e4 (I'm not sure why they use multiple vendor IDs but many
just like to be awkward it seems).

Playback on all 8 channels works. I'll likely keep this working in the
future and submit futher patches and improvements as necessary.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210118130621.77miiie47wp7mump@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/implicit.c     |  3 +-
 sound/usb/quirks-table.h | 60 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+), 1 deletion(-)

diff --git a/sound/usb/implicit.c b/sound/usb/implicit.c
index 521cc846d9d9f..e7216d0b860d8 100644
--- a/sound/usb/implicit.c
+++ b/sound/usb/implicit.c
@@ -302,7 +302,8 @@ static int audioformat_implicit_fb_quirk(struct snd_usb_audio *chip,
 	/* Pioneer devices with vendor spec class */
 	if (attr == USB_ENDPOINT_SYNC_ASYNC &&
 	    alts->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
-	    USB_ID_VENDOR(chip->usb_id) == 0x2b73 /* Pioneer */) {
+	    (USB_ID_VENDOR(chip->usb_id) == 0x2b73 || /* Pioneer */
+	     USB_ID_VENDOR(chip->usb_id) == 0x08e4    /* Pioneer */)) {
 		if (skip_pioneer_sync_ep(chip, fmt, alts))
 			return 1;
 	}
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index c8a4bdf18207c..93d55cd1a5a4c 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3757,6 +3757,66 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+{
+	/*
+	 * Pioneer DJ DJM-750
+	 * 8 channels playback & 8 channels capture @ 44.1/48/96kHz S24LE
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x08e4, 0x017f),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x05,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+					    USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_44100|
+						SNDRV_PCM_RATE_48000|
+						SNDRV_PCM_RATE_96000,
+					.rate_min = 44100,
+					.rate_max = 96000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) { 44100, 48000, 96000 }
+				}
+			},
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x86,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC|
+						USB_ENDPOINT_USAGE_IMPLICIT_FB,
+					.rates = SNDRV_PCM_RATE_44100|
+						SNDRV_PCM_RATE_48000|
+						SNDRV_PCM_RATE_96000,
+					.rate_min = 44100,
+					.rate_max = 96000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) { 44100, 48000, 96000 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
 #undef USB_AUDIO_DEVICE
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 35/67] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nicholas Kazlauskas, Daniel Wheeler, Eric Yang, Anson Jacob,
	Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index f4a2088ab1792..278ade3a90ccf 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1470,6 +1470,11 @@ static bool dc_link_construct(struct dc_link *link,
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 35/67] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Eric Yang, Anson Jacob, amd-gfx, Daniel Wheeler,
	dri-devel, Alex Deucher, Nicholas Kazlauskas

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index f4a2088ab1792..278ade3a90ccf 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1470,6 +1470,11 @@ static bool dc_link_construct(struct dc_link *link,
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 35/67] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Eric Yang, Anson Jacob, amd-gfx, Daniel Wheeler,
	dri-devel, Alex Deucher, Nicholas Kazlauskas

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index f4a2088ab1792..278ade3a90ccf 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1470,6 +1470,11 @@ static bool dc_link_construct(struct dc_link *link,
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 36/67] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jingwen Chen, Monk Liu, Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Jingwen Chen <Jingwen.Chen2@amd.com>

[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]

[Why]
when vram lost happened in guest, try to write vram can lead to
kernel stuck.

[How]
When the readback data is invalid, don't do write work, directly
reschedule a new work.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index 2d51b7694d1fd..572153d08ad11 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -560,10 +560,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev)
 static void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work)
 {
 	struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work);
+	int ret;
 
-	amdgpu_virt_read_pf2vf_data(adev);
+	ret = amdgpu_virt_read_pf2vf_data(adev);
+	if (ret)
+		goto out;
 	amdgpu_virt_write_vf2pf_data(adev);
 
+out:
 	schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms);
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 36/67] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jingwen Chen, dri-devel, amd-gfx, Alex Deucher, Monk Liu

From: Jingwen Chen <Jingwen.Chen2@amd.com>

[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]

[Why]
when vram lost happened in guest, try to write vram can lead to
kernel stuck.

[How]
When the readback data is invalid, don't do write work, directly
reschedule a new work.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index 2d51b7694d1fd..572153d08ad11 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -560,10 +560,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev)
 static void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work)
 {
 	struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work);
+	int ret;
 
-	amdgpu_virt_read_pf2vf_data(adev);
+	ret = amdgpu_virt_read_pf2vf_data(adev);
+	if (ret)
+		goto out;
 	amdgpu_virt_write_vf2pf_data(adev);
 
+out:
 	schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms);
 }
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 36/67] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jingwen Chen, dri-devel, amd-gfx, Alex Deucher, Monk Liu

From: Jingwen Chen <Jingwen.Chen2@amd.com>

[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]

[Why]
when vram lost happened in guest, try to write vram can lead to
kernel stuck.

[How]
When the readback data is invalid, don't do write work, directly
reschedule a new work.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index 2d51b7694d1fd..572153d08ad11 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -560,10 +560,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev)
 static void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work)
 {
 	struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work);
+	int ret;
 
-	amdgpu_virt_read_pf2vf_data(adev);
+	ret = amdgpu_virt_read_pf2vf_data(adev);
+	if (ret)
+		goto out;
 	amdgpu_virt_write_vf2pf_data(adev);
 
+out:
 	schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms);
 }
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 37/67] media: mceusb: sanity check for prescaler value
  2021-02-24 12:49 ` Sasha Levin
                   ` (35 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sean Young, syzbot+6d31bf169a8265204b8d, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Sean Young <sean@mess.org>

[ Upstream commit 9dec0f48a75e0dadca498002d25ef4e143e60194 ]

prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.

Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/mceusb.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index f1dbd059ed087..43d356251d051 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -701,11 +701,18 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
 				data[0], data[1]);
 			break;
 		case MCE_RSP_EQIRCFS:
+			if (!data[0] && !data[1]) {
+				dev_dbg(dev, "%s: no carrier", inout);
+				break;
+			}
+			// prescaler should make sense
+			if (data[0] > 8)
+				break;
 			period = DIV_ROUND_CLOSEST((1U << data[0] * 2) *
 						   (data[1] + 1), 10);
 			if (!period)
 				break;
-			carrier = (1000 * 1000) / period;
+			carrier = USEC_PER_SEC / period;
 			dev_dbg(dev, "%s carrier of %u Hz (period %uus)",
 				 inout, carrier, period);
 			break;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 38/67] media: v4l2-ctrls.c: fix shift-out-of-bounds in std_validate
  2021-02-24 12:49 ` Sasha Levin
                   ` (36 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans Verkuil, syzbot+42d8c7c3d3e594b34346, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 048c96e28674f15c0403deba2104ffba64544a06 ]

If a menu has more than 64 items, then don't check menu_skip_mask
for items 65 and up.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-ctrls.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 5cbe0ffbf501f..9dc151431a5c6 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -2165,7 +2165,8 @@ static int std_validate(const struct v4l2_ctrl *ctrl, u32 idx,
 	case V4L2_CTRL_TYPE_INTEGER_MENU:
 		if (ptr.p_s32[idx] < ctrl->minimum || ptr.p_s32[idx] > ctrl->maximum)
 			return -ERANGE;
-		if (ctrl->menu_skip_mask & (1ULL << ptr.p_s32[idx]))
+		if (ptr.p_s32[idx] < BITS_PER_LONG_LONG &&
+		    (ctrl->menu_skip_mask & BIT_ULL(ptr.p_s32[idx])))
 			return -EINVAL;
 		if (ctrl->type == V4L2_CTRL_TYPE_MENU &&
 		    ctrl->qmenu[ptr.p_s32[idx]][0] == '\0')
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 39/67] media: zr364xx: fix memory leaks in probe()
  2021-02-24 12:49 ` Sasha Levin
                   ` (37 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dan Carpenter, syzbot+b4d54814b339b5c6bbd4, Hans Verkuil,
	Mauro Carvalho Chehab, Sasha Levin, linux-usb, linux-media

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ea354b6ddd6f09be29424f41fa75a3e637fea234 ]

Syzbot discovered that the probe error handling doesn't clean up the
resources allocated in zr364xx_board_init().  There are several
related bugs in this code so I have re-written the error handling.

1)  Introduce a new function zr364xx_board_uninit() which cleans up
    the resources in zr364xx_board_init().
2)  In zr364xx_board_init() if the call to zr364xx_start_readpipe()
    fails then release the "cam->buffer.frame[i].lpvbits" memory
    before returning.  This way every function either allocates
    everything successfully or it cleans up after itself.
3)  Re-write the probe function so that each failure path goto frees
    the most recent allocation.  That way we don't free anything
    before it has been allocated and we can also verify that
    everything is freed.
4)  Originally, in the probe function the "cam->v4l2_dev.release"
    pointer was set to "zr364xx_release" near the start but I moved
    that assignment to the end, after everything had succeeded.  The
    release function was never actually called during the probe cleanup
    process, but with this change I wanted to make it clear that we
    don't want to call zr364xx_release() until everything is
    allocated successfully.

Next I re-wrote the zr364xx_release() function.  Ideally this would
have been a simple matter of copy and pasting the cleanup code from
probe and adding an additional call to video_unregister_device().  But
there are a couple quirks to note.

1)  The probe function does not call videobuf_mmap_free() and I don't
    know where the videobuf_mmap is allocated.  I left the code as-is to
    avoid introducing a bug in code I don't understand.
2)  The zr364xx_board_uninit() has a call to zr364xx_stop_readpipe()
    which is a change from the original behavior with regards to
    unloading the driver.  Calling zr364xx_stop_readpipe() on a stopped
    pipe is not a problem so this is safe and is potentially a bugfix.

Reported-by: syzbot+b4d54814b339b5c6bbd4@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/zr364xx/zr364xx.c | 49 ++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 1e1c6b4d1874b..d29b861367ea7 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1181,15 +1181,11 @@ static int zr364xx_open(struct file *file)
 	return err;
 }
 
-static void zr364xx_release(struct v4l2_device *v4l2_dev)
+static void zr364xx_board_uninit(struct zr364xx_camera *cam)
 {
-	struct zr364xx_camera *cam =
-		container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev);
 	unsigned long i;
 
-	v4l2_device_unregister(&cam->v4l2_dev);
-
-	videobuf_mmap_free(&cam->vb_vidq);
+	zr364xx_stop_readpipe(cam);
 
 	/* release sys buffers */
 	for (i = 0; i < FRAMES; i++) {
@@ -1200,9 +1196,19 @@ static void zr364xx_release(struct v4l2_device *v4l2_dev)
 		cam->buffer.frame[i].lpvbits = NULL;
 	}
 
-	v4l2_ctrl_handler_free(&cam->ctrl_handler);
 	/* release transfer buffer */
 	kfree(cam->pipe->transfer_buffer);
+}
+
+static void zr364xx_release(struct v4l2_device *v4l2_dev)
+{
+	struct zr364xx_camera *cam =
+		container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev);
+
+	videobuf_mmap_free(&cam->vb_vidq);
+	v4l2_ctrl_handler_free(&cam->ctrl_handler);
+	zr364xx_board_uninit(cam);
+	v4l2_device_unregister(&cam->v4l2_dev);
 	kfree(cam);
 }
 
@@ -1376,11 +1382,14 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
 	/* start read pipe */
 	err = zr364xx_start_readpipe(cam);
 	if (err)
-		goto err_free;
+		goto err_free_frames;
 
 	DBG(": board initialized\n");
 	return 0;
 
+err_free_frames:
+	for (i = 0; i < FRAMES; i++)
+		vfree(cam->buffer.frame[i].lpvbits);
 err_free:
 	kfree(cam->pipe->transfer_buffer);
 	cam->pipe->transfer_buffer = NULL;
@@ -1409,12 +1418,10 @@ static int zr364xx_probe(struct usb_interface *intf,
 	if (!cam)
 		return -ENOMEM;
 
-	cam->v4l2_dev.release = zr364xx_release;
 	err = v4l2_device_register(&intf->dev, &cam->v4l2_dev);
 	if (err < 0) {
 		dev_err(&udev->dev, "couldn't register v4l2_device\n");
-		kfree(cam);
-		return err;
+		goto free_cam;
 	}
 	hdl = &cam->ctrl_handler;
 	v4l2_ctrl_handler_init(hdl, 1);
@@ -1423,7 +1430,7 @@ static int zr364xx_probe(struct usb_interface *intf,
 	if (hdl->error) {
 		err = hdl->error;
 		dev_err(&udev->dev, "couldn't register control\n");
-		goto fail;
+		goto unregister;
 	}
 	/* save the init method used by this camera */
 	cam->method = id->driver_info;
@@ -1496,7 +1503,7 @@ static int zr364xx_probe(struct usb_interface *intf,
 	if (!cam->read_endpoint) {
 		err = -ENOMEM;
 		dev_err(&intf->dev, "Could not find bulk-in endpoint\n");
-		goto fail;
+		goto unregister;
 	}
 
 	/* v4l */
@@ -1507,10 +1514,11 @@ static int zr364xx_probe(struct usb_interface *intf,
 
 	/* load zr364xx board specific */
 	err = zr364xx_board_init(cam);
-	if (!err)
-		err = v4l2_ctrl_handler_setup(hdl);
 	if (err)
-		goto fail;
+		goto unregister;
+	err = v4l2_ctrl_handler_setup(hdl);
+	if (err)
+		goto board_uninit;
 
 	spin_lock_init(&cam->slock);
 
@@ -1525,16 +1533,21 @@ static int zr364xx_probe(struct usb_interface *intf,
 	err = video_register_device(&cam->vdev, VFL_TYPE_VIDEO, -1);
 	if (err) {
 		dev_err(&udev->dev, "video_register_device failed\n");
-		goto fail;
+		goto free_handler;
 	}
+	cam->v4l2_dev.release = zr364xx_release;
 
 	dev_info(&udev->dev, DRIVER_DESC " controlling device %s\n",
 		 video_device_node_name(&cam->vdev));
 	return 0;
 
-fail:
+free_handler:
 	v4l2_ctrl_handler_free(hdl);
+board_uninit:
+	zr364xx_board_uninit(cam);
+unregister:
 	v4l2_device_unregister(&cam->v4l2_dev);
+free_cam:
 	kfree(cam);
 	return err;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 40/67] media: uvcvideo: Allow entities with no pads
  2021-02-24 12:49 ` Sasha Levin
                   ` (38 preceding siblings ...)
  (?)
@ 2021-02-24 12:49 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ricardo Ribalda, Laurent Pinchart, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Ricardo Ribalda <ribalda@chromium.org>

[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ]

Avoid an underflow while calculating the number of inputs for entities
with zero pads.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_driver.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index ddb9eaa11be71..5ad5282641350 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1028,7 +1028,10 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 	unsigned int i;
 
 	extra_size = roundup(extra_size, sizeof(*entity->pads));
-	num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1;
+	if (num_pads)
+		num_inputs = type & UVC_TERM_OUTPUT ? num_pads : num_pads - 1;
+	else
+		num_inputs = 0;
 	size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads
 	     + num_inputs;
 	entity = kzalloc(size, GFP_KERNEL);
@@ -1044,7 +1047,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 
 	for (i = 0; i < num_inputs; ++i)
 		entity->pads[i].flags = MEDIA_PAD_FL_SINK;
-	if (!UVC_ENTITY_IS_OTERM(entity))
+	if (!UVC_ENTITY_IS_OTERM(entity) && num_pads)
 		entity->pads[num_pads-1].flags = MEDIA_PAD_FL_SOURCE;
 
 	entity->bNrInPins = num_inputs;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 41/67] f2fs: handle unallocated section and zone on pinned/atgc
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:49   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jaegeuk Kim, Chao Yu, Sasha Levin, linux-f2fs-devel

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 632faca72938f9f63049e48a8c438913828ac7a9 ]

If we have large section/zone, unallocated segment makes them corrupted.

E.g.,

  - Pinned file:       -1 119304647 119304647
  - ATGC   data:       -1 119304647 119304647

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index e81eb0748e2a9..229814b4f4a6c 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -101,11 +101,11 @@ static inline void sanity_check_seg_type(struct f2fs_sb_info *sbi,
 #define BLKS_PER_SEC(sbi)					\
 	((sbi)->segs_per_sec * (sbi)->blocks_per_seg)
 #define GET_SEC_FROM_SEG(sbi, segno)				\
-	((segno) / (sbi)->segs_per_sec)
+	(((segno) == -1) ? -1: (segno) / (sbi)->segs_per_sec)
 #define GET_SEG_FROM_SEC(sbi, secno)				\
 	((secno) * (sbi)->segs_per_sec)
 #define GET_ZONE_FROM_SEC(sbi, secno)				\
-	((secno) / (sbi)->secs_per_zone)
+	(((secno) == -1) ? -1: (secno) / (sbi)->secs_per_zone)
 #define GET_ZONE_FROM_SEG(sbi, segno)				\
 	GET_ZONE_FROM_SEC(sbi, GET_SEC_FROM_SEG(sbi, segno))
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [f2fs-dev] [PATCH AUTOSEL 5.11 41/67] f2fs: handle unallocated section and zone on pinned/atgc
@ 2021-02-24 12:49   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:49 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Jaegeuk Kim, linux-f2fs-devel

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 632faca72938f9f63049e48a8c438913828ac7a9 ]

If we have large section/zone, unallocated segment makes them corrupted.

E.g.,

  - Pinned file:       -1 119304647 119304647
  - ATGC   data:       -1 119304647 119304647

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index e81eb0748e2a9..229814b4f4a6c 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -101,11 +101,11 @@ static inline void sanity_check_seg_type(struct f2fs_sb_info *sbi,
 #define BLKS_PER_SEC(sbi)					\
 	((sbi)->segs_per_sec * (sbi)->blocks_per_seg)
 #define GET_SEC_FROM_SEG(sbi, segno)				\
-	((segno) / (sbi)->segs_per_sec)
+	(((segno) == -1) ? -1: (segno) / (sbi)->segs_per_sec)
 #define GET_SEG_FROM_SEC(sbi, secno)				\
 	((secno) * (sbi)->segs_per_sec)
 #define GET_ZONE_FROM_SEC(sbi, secno)				\
-	((secno) / (sbi)->secs_per_zone)
+	(((secno) == -1) ? -1: (secno) / (sbi)->secs_per_zone)
 #define GET_ZONE_FROM_SEG(sbi, segno)				\
 	GET_ZONE_FROM_SEC(sbi, GET_SEC_FROM_SEG(sbi, segno))
 
-- 
2.27.0



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 42/67] f2fs: fix to set/clear I_LINKABLE under i_lock
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Chao Yu, Jaegeuk Kim, Sasha Levin, linux-f2fs-devel

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 46085f37fc9e12d5c3539fb768b5ad7951e72acf ]

fsstress + fault injection test case reports a warning message as
below:

WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40
Call Trace:
 f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs]
 f2fs_add_inline_entry+0x153/0x3b0 [f2fs]
 f2fs_add_dentry+0x75/0x80 [f2fs]
 f2fs_do_add_link+0x108/0x160 [f2fs]
 f2fs_rename2+0x6ab/0x14f0 [f2fs]
 vfs_rename+0x70c/0x940
 do_renameat2+0x4d8/0x4f0
 __x64_sys_renameat2+0x4b/0x60
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Following race case can cause this:
Thread A				Kworker
- f2fs_rename
 - f2fs_create_whiteout
  - __f2fs_tmpfile
   - f2fs_i_links_write
    - f2fs_mark_inode_dirty_sync
     - mark_inode_dirty_sync
					- writeback_single_inode
					 - __writeback_single_inode
					  - spin_lock(&inode->i_lock)
   - inode->i_state |= I_LINKABLE
					  - inode->i_state &= ~dirty
					  - spin_unlock(&inode->i_lock)
 - f2fs_add_link
  - f2fs_do_add_link
   - f2fs_add_dentry
    - f2fs_add_inline_entry
     - f2fs_init_inode_metadata
      - f2fs_i_links_write
       - inc_nlink
        - WARN_ON(!(inode->i_state & I_LINKABLE))

Fix to add i_lock to avoid i_state update race condition.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/namei.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 6edb1ab579a18..8878049685769 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -855,7 +855,11 @@ static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
 
 	if (whiteout) {
 		f2fs_i_links_write(inode, false);
+
+		spin_lock(&inode->i_lock);
 		inode->i_state |= I_LINKABLE;
+		spin_unlock(&inode->i_lock);
+
 		*whiteout = inode;
 	} else {
 		d_tmpfile(dentry, inode);
@@ -1041,7 +1045,11 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		err = f2fs_add_link(old_dentry, whiteout);
 		if (err)
 			goto put_out_dir;
+
+		spin_lock(&whiteout->i_lock);
 		whiteout->i_state &= ~I_LINKABLE;
+		spin_unlock(&whiteout->i_lock);
+
 		iput(whiteout);
 	}
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [f2fs-dev] [PATCH AUTOSEL 5.11 42/67] f2fs: fix to set/clear I_LINKABLE under i_lock
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Jaegeuk Kim, linux-f2fs-devel

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 46085f37fc9e12d5c3539fb768b5ad7951e72acf ]

fsstress + fault injection test case reports a warning message as
below:

WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40
Call Trace:
 f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs]
 f2fs_add_inline_entry+0x153/0x3b0 [f2fs]
 f2fs_add_dentry+0x75/0x80 [f2fs]
 f2fs_do_add_link+0x108/0x160 [f2fs]
 f2fs_rename2+0x6ab/0x14f0 [f2fs]
 vfs_rename+0x70c/0x940
 do_renameat2+0x4d8/0x4f0
 __x64_sys_renameat2+0x4b/0x60
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Following race case can cause this:
Thread A				Kworker
- f2fs_rename
 - f2fs_create_whiteout
  - __f2fs_tmpfile
   - f2fs_i_links_write
    - f2fs_mark_inode_dirty_sync
     - mark_inode_dirty_sync
					- writeback_single_inode
					 - __writeback_single_inode
					  - spin_lock(&inode->i_lock)
   - inode->i_state |= I_LINKABLE
					  - inode->i_state &= ~dirty
					  - spin_unlock(&inode->i_lock)
 - f2fs_add_link
  - f2fs_do_add_link
   - f2fs_add_dentry
    - f2fs_add_inline_entry
     - f2fs_init_inode_metadata
      - f2fs_i_links_write
       - inc_nlink
        - WARN_ON(!(inode->i_state & I_LINKABLE))

Fix to add i_lock to avoid i_state update race condition.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/namei.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 6edb1ab579a18..8878049685769 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -855,7 +855,11 @@ static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
 
 	if (whiteout) {
 		f2fs_i_links_write(inode, false);
+
+		spin_lock(&inode->i_lock);
 		inode->i_state |= I_LINKABLE;
+		spin_unlock(&inode->i_lock);
+
 		*whiteout = inode;
 	} else {
 		d_tmpfile(dentry, inode);
@@ -1041,7 +1045,11 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		err = f2fs_add_link(old_dentry, whiteout);
 		if (err)
 			goto put_out_dir;
+
+		spin_lock(&whiteout->i_lock);
 		whiteout->i_state &= ~I_LINKABLE;
+		spin_unlock(&whiteout->i_lock);
+
 		iput(whiteout);
 	}
 
-- 
2.27.0



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 43/67] tomoyo: ignore data race while checking quota
  2021-02-24 12:49 ` Sasha Levin
                   ` (41 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tetsuo Handa, syzbot, Sasha Levin, linux-security-module

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 5797e861e402fff2bedce4ec8b7c89f4248b6073 ]

syzbot is reporting that tomoyo's quota check is racy [1]. But this check
is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore
this data race.

[1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e50476

Reported-by: syzbot <syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/tomoyo/file.c    | 16 ++++++++--------
 security/tomoyo/network.c |  8 ++++----
 security/tomoyo/util.c    | 24 ++++++++++++------------
 3 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 051f7297877cb..1e6077568fdec 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -362,14 +362,14 @@ static bool tomoyo_merge_path_acl(struct tomoyo_acl_info *a,
 {
 	u16 * const a_perm = &container_of(a, struct tomoyo_path_acl, head)
 		->perm;
-	u16 perm = *a_perm;
+	u16 perm = READ_ONCE(*a_perm);
 	const u16 b_perm = container_of(b, struct tomoyo_path_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -437,7 +437,7 @@ static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a,
 {
 	u8 *const a_perm = &container_of(a, struct tomoyo_mkdev_acl,
 					 head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_mkdev_acl, head)
 		->perm;
 
@@ -445,7 +445,7 @@ static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a,
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -517,14 +517,14 @@ static bool tomoyo_merge_path2_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm = &container_of(a, struct tomoyo_path2_acl, head)
 		->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_path2_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -655,7 +655,7 @@ static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm = &container_of(a, struct tomoyo_path_number_acl,
 					  head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_path_number_acl, head)
 		->perm;
 
@@ -663,7 +663,7 @@ static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a,
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
diff --git a/security/tomoyo/network.c b/security/tomoyo/network.c
index f9ff121d7e1eb..a89ed55d85d41 100644
--- a/security/tomoyo/network.c
+++ b/security/tomoyo/network.c
@@ -233,14 +233,14 @@ static bool tomoyo_merge_inet_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm =
 		&container_of(a, struct tomoyo_inet_acl, head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_inet_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -259,14 +259,14 @@ static bool tomoyo_merge_unix_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm =
 		&container_of(a, struct tomoyo_unix_acl, head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_unix_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c
index 176b803ebcfc9..e89cac913583c 100644
--- a/security/tomoyo/util.c
+++ b/security/tomoyo/util.c
@@ -1058,30 +1058,30 @@ bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r)
 
 		if (ptr->is_deleted)
 			continue;
+		/*
+		 * Reading perm bitmap might race with tomoyo_merge_*() because
+		 * caller does not hold tomoyo_policy_lock mutex. But exceeding
+		 * max_learning_entry parameter by a few entries does not harm.
+		 */
 		switch (ptr->type) {
 		case TOMOYO_TYPE_PATH_ACL:
-			perm = container_of(ptr, struct tomoyo_path_acl, head)
-				->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_path_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_PATH2_ACL:
-			perm = container_of(ptr, struct tomoyo_path2_acl, head)
-				->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_path2_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_PATH_NUMBER_ACL:
-			perm = container_of(ptr, struct tomoyo_path_number_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_path_number_acl, head)
+				  ->perm);
 			break;
 		case TOMOYO_TYPE_MKDEV_ACL:
-			perm = container_of(ptr, struct tomoyo_mkdev_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_mkdev_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_INET_ACL:
-			perm = container_of(ptr, struct tomoyo_inet_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_inet_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_UNIX_ACL:
-			perm = container_of(ptr, struct tomoyo_unix_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_unix_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_MANUAL_TASK_ACL:
 			perm = 0;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 44/67] nvme-core: add cancel tagset helpers
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chao Leng, Christoph Hellwig, Sasha Levin, linux-nvme

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 2547906982e2e6a0d42f8957f55af5bb51a7e55f ]

Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 20 ++++++++++++++++++++
 drivers/nvme/host/nvme.h |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f13eb4ded95fa..129e2b6bd6d3f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -371,6 +371,26 @@ bool nvme_cancel_request(struct request *req, void *data, bool reserved)
 }
 EXPORT_SYMBOL_GPL(nvme_cancel_request);
 
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->tagset) {
+		blk_mq_tagset_busy_iter(ctrl->tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_tagset);
+
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->admin_tagset) {
+		blk_mq_tagset_busy_iter(ctrl->admin_tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->admin_tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_admin_tagset);
+
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state)
 {
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 88a6b97247f50..a72f071810910 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -576,6 +576,8 @@ static inline bool nvme_is_aen_req(u16 qid, __u16 command_id)
 
 void nvme_complete_rq(struct request *req);
 bool nvme_cancel_request(struct request *req, void *data, bool reserved);
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl);
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl);
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state);
 bool nvme_wait_reset(struct nvme_ctrl *ctrl);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 44/67] nvme-core: add cancel tagset helpers
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-nvme, Christoph Hellwig, Chao Leng

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 2547906982e2e6a0d42f8957f55af5bb51a7e55f ]

Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 20 ++++++++++++++++++++
 drivers/nvme/host/nvme.h |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f13eb4ded95fa..129e2b6bd6d3f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -371,6 +371,26 @@ bool nvme_cancel_request(struct request *req, void *data, bool reserved)
 }
 EXPORT_SYMBOL_GPL(nvme_cancel_request);
 
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->tagset) {
+		blk_mq_tagset_busy_iter(ctrl->tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_tagset);
+
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->admin_tagset) {
+		blk_mq_tagset_busy_iter(ctrl->admin_tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->admin_tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_admin_tagset);
+
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state)
 {
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 88a6b97247f50..a72f071810910 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -576,6 +576,8 @@ static inline bool nvme_is_aen_req(u16 qid, __u16 command_id)
 
 void nvme_complete_rq(struct request *req);
 bool nvme_cancel_request(struct request *req, void *data, bool reserved);
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl);
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl);
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state);
 bool nvme_wait_reset(struct nvme_ctrl *ctrl);
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 45/67] nvme-rdma: add clean action for failed reconnection
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chao Leng, Christoph Hellwig, Sasha Levin, linux-nvme

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 958dc1d32c80566f58d18f05ef1f05bd32d172c1 ]

A crash happens when inject failed reconnection.
If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index b7ce4f221d990..746392eade455 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -919,12 +919,16 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
 
 	error = nvme_init_identify(&ctrl->ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 out_stop_queue:
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.admin_q);
@@ -1001,8 +1005,10 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(&ctrl->ctrl);
+	nvme_sync_io_queues(&ctrl->ctrl);
 	nvme_rdma_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(&ctrl->ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.connect_q);
 out_free_tag_set:
@@ -1144,10 +1150,18 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->ctrl.queue_count > 1)
+	if (ctrl->ctrl.queue_count > 1) {
+		nvme_stop_queues(&ctrl->ctrl);
+		nvme_sync_io_queues(&ctrl->ctrl);
+		nvme_rdma_stop_io_queues(ctrl);
+		nvme_cancel_tagset(&ctrl->ctrl);
 		nvme_rdma_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 	nvme_rdma_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 45/67] nvme-rdma: add clean action for failed reconnection
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-nvme, Christoph Hellwig, Chao Leng

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 958dc1d32c80566f58d18f05ef1f05bd32d172c1 ]

A crash happens when inject failed reconnection.
If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index b7ce4f221d990..746392eade455 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -919,12 +919,16 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
 
 	error = nvme_init_identify(&ctrl->ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 out_stop_queue:
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.admin_q);
@@ -1001,8 +1005,10 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(&ctrl->ctrl);
+	nvme_sync_io_queues(&ctrl->ctrl);
 	nvme_rdma_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(&ctrl->ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.connect_q);
 out_free_tag_set:
@@ -1144,10 +1150,18 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->ctrl.queue_count > 1)
+	if (ctrl->ctrl.queue_count > 1) {
+		nvme_stop_queues(&ctrl->ctrl);
+		nvme_sync_io_queues(&ctrl->ctrl);
+		nvme_rdma_stop_io_queues(ctrl);
+		nvme_cancel_tagset(&ctrl->ctrl);
 		nvme_rdma_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 	nvme_rdma_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 46/67] nvme-tcp: add clean action for failed reconnection
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chao Leng, Christoph Hellwig, Sasha Levin, linux-nvme

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 70a99574a79f1cd4dc7ad56ea37be40844bfb97b ]

If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 881d28eb15e9d..30d24a5a5b826 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1815,8 +1815,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(ctrl);
+	nvme_sync_io_queues(ctrl);
 	nvme_tcp_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->connect_q);
 out_free_tag_set:
@@ -1878,12 +1880,16 @@ static int nvme_tcp_configure_admin_queue(struct nvme_ctrl *ctrl, bool new)
 
 	error = nvme_init_identify(ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 out_stop_queue:
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->admin_q);
@@ -2003,10 +2009,18 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->queue_count > 1)
+	if (ctrl->queue_count > 1) {
+		nvme_stop_queues(ctrl);
+		nvme_sync_io_queues(ctrl);
+		nvme_tcp_stop_io_queues(ctrl);
+		nvme_cancel_tagset(ctrl);
 		nvme_tcp_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 	nvme_tcp_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 46/67] nvme-tcp: add clean action for failed reconnection
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-nvme, Christoph Hellwig, Chao Leng

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 70a99574a79f1cd4dc7ad56ea37be40844bfb97b ]

If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 881d28eb15e9d..30d24a5a5b826 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1815,8 +1815,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(ctrl);
+	nvme_sync_io_queues(ctrl);
 	nvme_tcp_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->connect_q);
 out_free_tag_set:
@@ -1878,12 +1880,16 @@ static int nvme_tcp_configure_admin_queue(struct nvme_ctrl *ctrl, bool new)
 
 	error = nvme_init_identify(ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 out_stop_queue:
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->admin_q);
@@ -2003,10 +2009,18 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->queue_count > 1)
+	if (ctrl->queue_count > 1) {
+		nvme_stop_queues(ctrl);
+		nvme_sync_io_queues(ctrl);
+		nvme_tcp_stop_io_queues(ctrl);
+		nvme_cancel_tagset(ctrl);
 		nvme_tcp_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 	nvme_tcp_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 47/67] ALSA: usb-audio: Add DJM450 to Pioneer format quirk
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Olivia Mackintosh, Takashi Iwai, Sasha Levin, alsa-devel

From: Olivia Mackintosh <livvy@base.nu>

[ Upstream commit 3b85f5fc75d564a9eb4171dcb6b8687b080cd4d5 ]

Like the DJM-750, ensure that the format control message is passed to
the device when opening a stream. It seems as though fmt->sync_ep is not
always set when this function is called hence the passing of the value
at the call site. If this can be fixed, fmt->sync_up should be used as
the wvalue.

There doesn't seem to be a "cpu_to_le24" type function defined hence for
the open code but I did see a similar thing done in Bluez lib. Perhaps
we can get these definitions defined in byteorder.h. See hci_cpu_to_le24
in include/net/bluetooth/hci.h:2543 for similar usage.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-2-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index e196e364cef19..9ba4682ebc482 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1470,6 +1470,23 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs,
 	subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0;
 }
 
+static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs,
+					u16 windex)
+{
+	unsigned int cur_rate = subs->data_endpoint->cur_rate;
+	u8 sr[3];
+	// Convert to little endian
+	sr[0] = cur_rate & 0xff;
+	sr[1] = (cur_rate >> 8) & 0xff;
+	sr[2] = (cur_rate >> 16) & 0xff;
+	usb_set_interface(subs->dev, 0, 1);
+	// we should derive windex from fmt-sync_ep but it's not set
+	snd_usb_ctl_msg(subs->stream->chip->dev,
+		usb_rcvctrlpipe(subs->stream->chip->dev, 0),
+		0x01, 0x22, 0x0100, windex, &sr, 0x0003);
+	return 0;
+}
+
 void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 			      const struct audioformat *fmt)
 {
@@ -1483,6 +1500,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
 		subs->stream_offset_adj = 2;
 		break;
+	case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
+		pioneer_djm_set_format_quirk(subs, 0x0082);
+		break;
 	}
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 47/67] ALSA: usb-audio: Add DJM450 to Pioneer format quirk
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Takashi Iwai, Sasha Levin, alsa-devel, Olivia Mackintosh

From: Olivia Mackintosh <livvy@base.nu>

[ Upstream commit 3b85f5fc75d564a9eb4171dcb6b8687b080cd4d5 ]

Like the DJM-750, ensure that the format control message is passed to
the device when opening a stream. It seems as though fmt->sync_ep is not
always set when this function is called hence the passing of the value
at the call site. If this can be fixed, fmt->sync_up should be used as
the wvalue.

There doesn't seem to be a "cpu_to_le24" type function defined hence for
the open code but I did see a similar thing done in Bluez lib. Perhaps
we can get these definitions defined in byteorder.h. See hci_cpu_to_le24
in include/net/bluetooth/hci.h:2543 for similar usage.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-2-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index e196e364cef19..9ba4682ebc482 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1470,6 +1470,23 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs,
 	subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0;
 }
 
+static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs,
+					u16 windex)
+{
+	unsigned int cur_rate = subs->data_endpoint->cur_rate;
+	u8 sr[3];
+	// Convert to little endian
+	sr[0] = cur_rate & 0xff;
+	sr[1] = (cur_rate >> 8) & 0xff;
+	sr[2] = (cur_rate >> 16) & 0xff;
+	usb_set_interface(subs->dev, 0, 1);
+	// we should derive windex from fmt-sync_ep but it's not set
+	snd_usb_ctl_msg(subs->stream->chip->dev,
+		usb_rcvctrlpipe(subs->stream->chip->dev, 0),
+		0x01, 0x22, 0x0100, windex, &sr, 0x0003);
+	return 0;
+}
+
 void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 			      const struct audioformat *fmt)
 {
@@ -1483,6 +1500,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
 		subs->stream_offset_adj = 2;
 		break;
+	case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
+		pioneer_djm_set_format_quirk(subs, 0x0082);
+		break;
 	}
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 48/67] ALSA: usb-audio: Add DJM-450 to the quirks table
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Olivia Mackintosh, Takashi Iwai, Sasha Levin, alsa-devel

From: Olivia Mackintosh <livvy@base.nu>

[ Upstream commit 9119e5661eab2c56a96b936cde49c6740dc49ff9 ]

As with most Pioneer devices, the device descriptor is vendor specific
and as such, the number of channels, the PCM format, endpoints and
sample rate need to be specified. This device has 8 inputs and 8 outputs
and a sample rate of 48000 only. The PCM format is S24_3LE like other
devices.

There seems to be an appetite for reducing duplication amongs these
Pioneer patches but again, I feel this is a step to be taken after
support has been added as it's not completely clear where the
commonalities are.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-3-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks-table.h | 57 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 93d55cd1a5a4c..1165a5ac60f22 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3817,6 +3817,63 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+{
+	/*
+	 * Pioneer DJ DJM-450
+	 * PCM is 8 channels out @ 48 fixed (endpoint 0x01)
+	 * and 8 channels in @ 48 fixed (endpoint 0x82).
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0013),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8, // outputs
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 48000 }
+					}
+			},
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8, // inputs
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x82,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC|
+						USB_ENDPOINT_USAGE_IMPLICIT_FB,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 48000 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
 #undef USB_AUDIO_DEVICE
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 48/67] ALSA: usb-audio: Add DJM-450 to the quirks table
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Takashi Iwai, Sasha Levin, alsa-devel, Olivia Mackintosh

From: Olivia Mackintosh <livvy@base.nu>

[ Upstream commit 9119e5661eab2c56a96b936cde49c6740dc49ff9 ]

As with most Pioneer devices, the device descriptor is vendor specific
and as such, the number of channels, the PCM format, endpoints and
sample rate need to be specified. This device has 8 inputs and 8 outputs
and a sample rate of 48000 only. The PCM format is S24_3LE like other
devices.

There seems to be an appetite for reducing duplication amongs these
Pioneer patches but again, I feel this is a step to be taken after
support has been added as it's not completely clear where the
commonalities are.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-3-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks-table.h | 57 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 93d55cd1a5a4c..1165a5ac60f22 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3817,6 +3817,63 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+{
+	/*
+	 * Pioneer DJ DJM-450
+	 * PCM is 8 channels out @ 48 fixed (endpoint 0x01)
+	 * and 8 channels in @ 48 fixed (endpoint 0x82).
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0013),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8, // outputs
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 48000 }
+					}
+			},
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8, // inputs
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x82,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC|
+						USB_ENDPOINT_USAGE_IMPLICIT_FB,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 48000 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
 #undef USB_AUDIO_DEVICE
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 49/67] smackfs: restrict bytes count in smackfs write functions
  2021-02-24 12:49 ` Sasha Levin
                   ` (47 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sabyrzhan Tasbolatov, syzbot+a71a442385a0b2815497,
	Casey Schaufler, Sasha Levin, linux-security-module

From: Sabyrzhan Tasbolatov <snovitoll@gmail.com>

[ Upstream commit 7ef4c19d245f3dc233fd4be5acea436edd1d83d8 ]

syzbot found WARNINGs in several smackfs write operations where
bytes count is passed to memdup_user_nul which exceeds
GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE.

Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO,
smk_write_net6addr accepts any label or -DELETE. I couldn't find
any general rule for other label lengths except SMK_LABELLEN,
SMK_LONGLABEL, SMK_CIPSOMAX which are documented.

Let's constrain, in general, smackfs label lengths for PAGE_SIZE.
Although fuzzer crashes write to smackfs/netlabel on 0x400000 length.

Here is a quick way to reproduce the WARNING:
python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel

Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smackfs.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 5d44b7d258ef0..22ded2c26089c 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -1167,7 +1167,7 @@ static ssize_t smk_write_net4addr(struct file *file, const char __user *buf,
 		return -EPERM;
 	if (*ppos != 0)
 		return -EINVAL;
-	if (count < SMK_NETLBLADDRMIN)
+	if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1)
 		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
@@ -1427,7 +1427,7 @@ static ssize_t smk_write_net6addr(struct file *file, const char __user *buf,
 		return -EPERM;
 	if (*ppos != 0)
 		return -EINVAL;
-	if (count < SMK_NETLBLADDRMIN)
+	if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1)
 		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
@@ -1834,6 +1834,10 @@ static ssize_t smk_write_ambient(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	/* Enough data must be present */
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2005,6 +2009,9 @@ static ssize_t smk_write_onlycap(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	if (count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2092,6 +2099,9 @@ static ssize_t smk_write_unconfined(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	if (count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2648,6 +2658,10 @@ static ssize_t smk_write_syslog(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	/* Enough data must be present */
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2740,10 +2754,13 @@ static ssize_t smk_write_relabel_self(struct file *file, const char __user *buf,
 		return -EPERM;
 
 	/*
+	 * No partial write.
 	 * Enough data must be present.
 	 */
 	if (*ppos != 0)
 		return -EINVAL;
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 50/67] Drivers: hv: vmbus: Initialize memory to be sent to the host
  2021-02-24 12:49 ` Sasha Levin
                   ` (48 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  2021-02-24 13:16   ` Andrea Parri
  -1 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Andrea Parri (Microsoft),
	Juan Vazquez, Michael Kelley, Wei Liu, Sasha Levin, linux-hyperv

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]

__vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory
for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown
objects they allocate respectively.  These objects contain padding bytes
and fields that are left uninitialized and that are later sent to the
host, potentially leaking guest data.  Zero initialize such fields to
avoid leaking sensitive information to the host.

Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 6fb0c76bfbf81..0bd202de79600 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -618,7 +618,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel,
 		goto error_clean_ring;
 
 	/* Create and init the channel open message */
-	open_info = kmalloc(sizeof(*open_info) +
+	open_info = kzalloc(sizeof(*open_info) +
 			   sizeof(struct vmbus_channel_open_channel),
 			   GFP_KERNEL);
 	if (!open_info) {
@@ -745,7 +745,7 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
 	unsigned long flags;
 	int ret;
 
-	info = kmalloc(sizeof(*info) +
+	info = kzalloc(sizeof(*info) +
 		       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 51/67] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind()
  2021-02-24 12:49 ` Sasha Levin
                   ` (49 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  2021-02-24 13:17   ` Andrea Parri
  -1 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Andrea Parri (Microsoft),
	Juan Vazquez, Michael Kelley, Wei Liu, Sasha Levin, linux-hyperv

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit e4d221b42354b2e2ddb9187a806afb651eee2cda ]

An erroneous or malicious host could send multiple rescind messages for
a same channel.  In vmbus_onoffer_rescind(), the guest maps the channel
ID to obtain a pointer to the channel object and it eventually releases
such object and associated data.  The host could time rescind messages
and lead to an use-after-free.  Add a new flag to the channel structure
to make sure that only one instance of vmbus_onoffer_rescind() can get
the reference to the channel object.

Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel_mgmt.c | 12 ++++++++++++
 include/linux/hyperv.h    |  1 +
 2 files changed, 13 insertions(+)

diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 1d44bb635bb84..a9f58840f85dc 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -1049,6 +1049,18 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
 
 	mutex_lock(&vmbus_connection.channel_mutex);
 	channel = relid2channel(rescind->child_relid);
+	if (channel != NULL) {
+		/*
+		 * Guarantee that no other instance of vmbus_onoffer_rescind()
+		 * has got a reference to the channel object.  Synchronize on
+		 * &vmbus_connection.channel_mutex.
+		 */
+		if (channel->rescind_ref) {
+			mutex_unlock(&vmbus_connection.channel_mutex);
+			return;
+		}
+		channel->rescind_ref = true;
+	}
 	mutex_unlock(&vmbus_connection.channel_mutex);
 
 	if (channel == NULL) {
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 5ddb479c4d4cb..ef3573e99d989 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -803,6 +803,7 @@ struct vmbus_channel {
 	u8 monitor_bit;
 
 	bool rescind; /* got rescind msg */
+	bool rescind_ref; /* got rescind msg, got channel reference */
 	struct completion rescind_event;
 
 	u32 ringbuffer_gpadlhandle;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 52/67] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Andy Shevchenko, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8ade6d8b02b1ead741bd4f6c42921035caab6560 ]

Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
   platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
   non CR systems which list their IPC IRQ at index 0 despite being
   non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5

Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/soc-intel-quirks.h | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h
index b07df3059926d..a93987ab7f4d7 100644
--- a/sound/soc/intel/common/soc-intel-quirks.h
+++ b/sound/soc/intel/common/soc-intel-quirks.h
@@ -11,6 +11,7 @@
 
 #if IS_ENABLED(CONFIG_X86)
 
+#include <linux/dmi.h>
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
@@ -38,12 +39,36 @@ SOC_INTEL_IS_CPU(cml, KABYLAKE_L);
 
 static inline bool soc_intel_is_byt_cr(struct platform_device *pdev)
 {
+	/*
+	 * List of systems which:
+	 * 1. Use a non CR version of the Bay Trail SoC
+	 * 2. Contain at least 6 interrupt resources so that the
+	 *    platform_get_resource(pdev, IORESOURCE_IRQ, 5) check below
+	 *    succeeds
+	 * 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
+	 *
+	 * This needs to be here so that it can be shared between the SST and
+	 * SOF drivers. We rely on the compiler to optimize this out in files
+	 * where soc_intel_is_byt_cr is not used.
+	 */
+	static const struct dmi_system_id force_bytcr_table[] = {
+		{	/* Lenovo Yoga Tablet 2 series */
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+				DMI_MATCH(DMI_PRODUCT_FAMILY, "YOGATablet2"),
+			},
+		},
+		{}
+	};
 	struct device *dev = &pdev->dev;
 	int status = 0;
 
 	if (!soc_intel_is_byt())
 		return false;
 
+	if (dmi_check_system(force_bytcr_table))
+		return true;
+
 	if (iosf_mbi_available()) {
 		u32 bios_status;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 52/67] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Pierre-Louis Bossart, Hans de Goede,
	Andy Shevchenko, Mark Brown

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8ade6d8b02b1ead741bd4f6c42921035caab6560 ]

Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
   platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
   non CR systems which list their IPC IRQ at index 0 despite being
   non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5

Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/soc-intel-quirks.h | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h
index b07df3059926d..a93987ab7f4d7 100644
--- a/sound/soc/intel/common/soc-intel-quirks.h
+++ b/sound/soc/intel/common/soc-intel-quirks.h
@@ -11,6 +11,7 @@
 
 #if IS_ENABLED(CONFIG_X86)
 
+#include <linux/dmi.h>
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
@@ -38,12 +39,36 @@ SOC_INTEL_IS_CPU(cml, KABYLAKE_L);
 
 static inline bool soc_intel_is_byt_cr(struct platform_device *pdev)
 {
+	/*
+	 * List of systems which:
+	 * 1. Use a non CR version of the Bay Trail SoC
+	 * 2. Contain at least 6 interrupt resources so that the
+	 *    platform_get_resource(pdev, IORESOURCE_IRQ, 5) check below
+	 *    succeeds
+	 * 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
+	 *
+	 * This needs to be here so that it can be shared between the SST and
+	 * SOF drivers. We rely on the compiler to optimize this out in files
+	 * where soc_intel_is_byt_cr is not used.
+	 */
+	static const struct dmi_system_id force_bytcr_table[] = {
+		{	/* Lenovo Yoga Tablet 2 series */
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+				DMI_MATCH(DMI_PRODUCT_FAMILY, "YOGATablet2"),
+			},
+		},
+		{}
+	};
 	struct device *dev = &pdev->dev;
 	int status = 0;
 
 	if (!soc_intel_is_byt())
 		return false;
 
+	if (dmi_check_system(force_bytcr_table))
+		return true;
+
 	if (iosf_mbi_available()) {
 		u32 bios_status;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 53/67] btrfs: fix error handling in commit_fs_roots
  2021-02-24 12:49 ` Sasha Levin
                   ` (51 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Josef Bacik, David Sterba, Sasha Levin, linux-btrfs

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 4f4317c13a40194940acf4a71670179c4faca2b5 ]

While doing error injection I would sometimes get a corrupt file system.
This is because I was injecting errors at btrfs_search_slot, but would
only do it one time per stack.  This uncovered a problem in
commit_fs_roots, where if we get an error we would just break.  However
we're in a nested loop, the first loop being a loop to find all the
dirty fs roots, and then subsequent root updates would succeed clearing
the error value.

This isn't likely to happen in real scenarios, however we could
potentially get a random ENOMEM once and then not again, and we'd end up
with a corrupted file system.  Fix this by moving the error checking
around a bit to the main loop, as this is the only place where something
will fail, and return the error as soon as it occurs.

With this patch my reproducer no longer corrupts the file system.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/transaction.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 6af7f2bf92de7..fbf93067642ac 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1319,7 +1319,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 	struct btrfs_root *gang[8];
 	int i;
 	int ret;
-	int err = 0;
 
 	spin_lock(&fs_info->fs_roots_radix_lock);
 	while (1) {
@@ -1331,6 +1330,8 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			break;
 		for (i = 0; i < ret; i++) {
 			struct btrfs_root *root = gang[i];
+			int ret2;
+
 			radix_tree_tag_clear(&fs_info->fs_roots_radix,
 					(unsigned long)root->root_key.objectid,
 					BTRFS_ROOT_TRANS_TAG);
@@ -1350,17 +1351,17 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 						    root->node);
 			}
 
-			err = btrfs_update_root(trans, fs_info->tree_root,
+			ret2 = btrfs_update_root(trans, fs_info->tree_root,
 						&root->root_key,
 						&root->root_item);
+			if (ret2)
+				return ret2;
 			spin_lock(&fs_info->fs_roots_radix_lock);
-			if (err)
-				break;
 			btrfs_qgroup_free_meta_all_pertrans(root);
 		}
 	}
 	spin_unlock(&fs_info->fs_roots_radix_lock);
-	return err;
+	return 0;
 }
 
 /*
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 54/67] btrfs: make btrfs_start_delalloc_root's nr argument a long
  2021-02-24 12:49 ` Sasha Levin
                   ` (52 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  2021-02-24 18:09   ` David Sterba
  -1 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nikolay Borisov, Josef Bacik, David Sterba, Sasha Levin, linux-btrfs

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 9db4dc241e87fccd8301357d5ef908f40b50f2e3 ]

It's currently u64 which gets instantly translated either to LONG_MAX
(if U64_MAX is passed) or cast to an unsigned long (which is in fact,
wrong because writeback_control::nr_to_write is a signed, long type).

Just convert the function's argument to be long time which obviates the
need to manually convert u64 value to a long. Adjust all call sites
which pass U64_MAX to pass LONG_MAX. Finally ensure that in
shrink_delalloc the u64 is converted to a long without overflowing,
resulting in a negative number.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ctree.h       | 2 +-
 fs/btrfs/dev-replace.c | 2 +-
 fs/btrfs/inode.c       | 6 +++---
 fs/btrfs/ioctl.c       | 2 +-
 fs/btrfs/space-info.c  | 3 ++-
 5 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 4debdbdde2abb..81fde2d0327df 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3100,7 +3100,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 			       u32 min_type);
 
 int btrfs_start_delalloc_snapshot(struct btrfs_root *root);
-int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr,
+int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr,
 			       bool in_reclaim_context);
 int btrfs_set_extent_delalloc(struct btrfs_inode *inode, u64 start, u64 end,
 			      unsigned int extra_bits,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 324f646d6e5e2..bc73f798ce3a8 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -715,7 +715,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info,
 	 * flush all outstanding I/O and inode extent mappings before the
 	 * copy operation is declared as being finished
 	 */
-	ret = btrfs_start_delalloc_roots(fs_info, U64_MAX, false);
+	ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false);
 	if (ret) {
 		mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
 		return ret;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a8e0a6b038d3e..3a02b17f76eb7 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -9486,11 +9486,11 @@ int btrfs_start_delalloc_snapshot(struct btrfs_root *root)
 	return start_delalloc_inodes(root, &wbc, true, false);
 }
 
-int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr,
+int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr,
 			       bool in_reclaim_context)
 {
 	struct writeback_control wbc = {
-		.nr_to_write = (nr == U64_MAX) ? LONG_MAX : (unsigned long)nr,
+		.nr_to_write = nr,
 		.sync_mode = WB_SYNC_NONE,
 		.range_start = 0,
 		.range_end = LLONG_MAX,
@@ -9512,7 +9512,7 @@ int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr,
 		 * Reset nr_to_write here so we know that we're doing a full
 		 * flush.
 		 */
-		if (nr == U64_MAX)
+		if (nr == LONG_MAX)
 			wbc.nr_to_write = LONG_MAX;
 
 		root = list_first_entry(&splice, struct btrfs_root,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index dde49a791f3e2..e26df790988ba 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -4951,7 +4951,7 @@ long btrfs_ioctl(struct file *file, unsigned int
 	case BTRFS_IOC_SYNC: {
 		int ret;
 
-		ret = btrfs_start_delalloc_roots(fs_info, U64_MAX, false);
+		ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false);
 		if (ret)
 			return ret;
 		ret = btrfs_sync_fs(inode->i_sb, 1);
diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index e8347461c8ddd..84fb94e78a8ff 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -532,7 +532,8 @@ static void shrink_delalloc(struct btrfs_fs_info *fs_info,
 
 	loops = 0;
 	while ((delalloc_bytes || dio_bytes) && loops < 3) {
-		u64 nr_pages = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT;
+		u64 temp = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT;
+		long nr_pages = min_t(u64, temp, LONG_MAX);
 
 		btrfs_start_delalloc_roots(fs_info, nr_pages, true);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 55/67] btrfs: only let one thread pre-flush delayed refs in commit
  2021-02-24 12:49 ` Sasha Levin
                   ` (53 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  2021-02-24 18:08   ` David Sterba
  -1 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Josef Bacik, Nikolay Borisov, David Sterba, Sasha Levin, linux-btrfs

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit e19eb11f4f3d3b0463cd897016064a79cb6d8c6d ]

I've been running a stress test that runs 20 workers in their own
subvolume, which are running an fsstress instance with 4 threads per
worker, which is 80 total fsstress threads.  In addition to this I'm
running balance in the background as well as creating and deleting
snapshots.  This test takes around 12 hours to run normally, going
slower and slower as the test goes on.

The reason for this is because fsstress is running fsync sometimes, and
because we're messing with block groups we often fall through to
btrfs_commit_transaction, so will often have 20-30 threads all calling
btrfs_commit_transaction at the same time.

These all get stuck contending on the extent tree while they try to run
delayed refs during the initial part of the commit.

This is suboptimal, really because the extent tree is a single point of
failure we only want one thread acting on that tree at once to reduce
lock contention.

Fix this by making the flushing mechanism a bit operation, to make it
easy to use test_and_set_bit() in order to make sure only one task does
this initial flush.

Once we're into the transaction commit we only have one thread doing
delayed ref running, it's just this initial pre-flush that is
problematic.  With this patch my stress test takes around 90 minutes to
run, instead of 12 hours.

The memory barrier is not necessary for the flushing bit as it's
ordered, unlike plain int. The transaction state accessed in
btrfs_should_end_transaction could be affected by that too as it's not
always used under transaction lock. Upon Nikolay's analysis in [1]
it's not necessary:

  In should_end_transaction it's read without holding any locks. (U)

  It's modified in btrfs_cleanup_transaction without holding the
  fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set.

  set in cleanup_transaction under fs_info->trans_lock (L)
  set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L)
  set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L)
  set in btrfs_commit_trans to COMMIT_UNBLOCK under
  fs_info->trans_lock.(L)

  set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this
  point the transaction is finished and fs_info->running_trans is NULL (U
  but irrelevant).

  So by the looks of it we can have a concurrent READ race with a WRITE,
  due to reads not taking a lock. In this case what we want to ensure is
  we either see new or old state. I consulted with Will Deacon and he said
  that in such a case we'd want to annotate the accesses to ->state with
  (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I
  don't think this could happen but I imagine at some point KCSAN would
  flag such an access as racy (which it is).

[1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add comments regarding memory barrier ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/delayed-ref.h | 12 ++++++------
 fs/btrfs/transaction.c | 32 +++++++++++++++-----------------
 2 files changed, 21 insertions(+), 23 deletions(-)

diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h
index 1c977e6d45dc3..52364ea322d67 100644
--- a/fs/btrfs/delayed-ref.h
+++ b/fs/btrfs/delayed-ref.h
@@ -135,6 +135,11 @@ struct btrfs_delayed_data_ref {
 	u64 offset;
 };
 
+enum btrfs_delayed_ref_flags {
+	/* Indicate that we are flushing delayed refs for the commit */
+	BTRFS_DELAYED_REFS_FLUSHING,
+};
+
 struct btrfs_delayed_ref_root {
 	/* head ref rbtree */
 	struct rb_root_cached href_root;
@@ -158,12 +163,7 @@ struct btrfs_delayed_ref_root {
 
 	u64 pending_csums;
 
-	/*
-	 * set when the tree is flushing before a transaction commit,
-	 * used by the throttling code to decide if new updates need
-	 * to be run right away
-	 */
-	int flushing;
+	unsigned long flags;
 
 	u64 run_delayed_start;
 
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index fbf93067642ac..3cced84752178 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -909,9 +909,8 @@ bool btrfs_should_end_transaction(struct btrfs_trans_handle *trans)
 {
 	struct btrfs_transaction *cur_trans = trans->transaction;
 
-	smp_mb();
 	if (cur_trans->state >= TRANS_STATE_COMMIT_START ||
-	    cur_trans->delayed_refs.flushing)
+	    test_bit(BTRFS_DELAYED_REFS_FLUSHING, &cur_trans->delayed_refs.flags))
 		return true;
 
 	return should_end_transaction(trans);
@@ -2043,23 +2042,22 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 	btrfs_trans_release_metadata(trans);
 	trans->block_rsv = NULL;
 
-	/* make a pass through all the delayed refs we have so far
-	 * any runnings procs may add more while we are here
-	 */
-	ret = btrfs_run_delayed_refs(trans, 0);
-	if (ret) {
-		btrfs_end_transaction(trans);
-		return ret;
-	}
-
-	cur_trans = trans->transaction;
-
 	/*
-	 * set the flushing flag so procs in this transaction have to
-	 * start sending their work down.
+	 * We only want one transaction commit doing the flushing so we do not
+	 * waste a bunch of time on lock contention on the extent root node.
 	 */
-	cur_trans->delayed_refs.flushing = 1;
-	smp_wmb();
+	if (!test_and_set_bit(BTRFS_DELAYED_REFS_FLUSHING,
+			      &cur_trans->delayed_refs.flags)) {
+		/*
+		 * Make a pass through all the delayed refs we have so far.
+		 * Any running threads may add more while we are here.
+		 */
+		ret = btrfs_run_delayed_refs(trans, 0);
+		if (ret) {
+			btrfs_end_transaction(trans);
+			return ret;
+		}
+	}
 
 	btrfs_create_pending_block_groups(trans);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 56/67] drm/amdgpu: enable only one high prio compute queue
  2021-02-24 12:49 ` Sasha Levin
  (?)
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nirmoy Das, Christian König, Alex Deucher, Sasha Levin,
	amd-gfx, dri-devel

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h |  2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c  |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c   |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   |  7 ++-----
 5 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index cd2c676a2797c..8e0a6c62322ec 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
-	int cond;
-	/* Policy: alternate between normal and high priority */
-	cond = multipipe_policy ? pipe : queue;
-
-	return ((cond % 2) != 0);
+	/* Policy: use 1st queue as high priority compute queue if we
+	 * have more than one compute queue.
+	 */
+	if (adev->gfx.num_compute_rings > 1 &&
+	    ring == &adev->gfx.compute_ring[0])
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index 6b5a8f4642cc9..72dbcd2bc6a63 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -380,7 +380,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index d86b42a365601..972ffbdf4949c 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -4494,8 +4494,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -6547,8 +6546,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 37639214cbbbd..b0284c4659ba5 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1923,8 +1923,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -4442,8 +4441,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 5f4805e4d04ac..3e800193a604b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	return amdgpu_ring_init(adev, ring, 1024,
@@ -3391,9 +3390,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev,
-							      ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 56/67] drm/amdgpu: enable only one high prio compute queue
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Nirmoy Das, amd-gfx, Alex Deucher,
	Christian König

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h |  2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c  |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c   |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   |  7 ++-----
 5 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index cd2c676a2797c..8e0a6c62322ec 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
-	int cond;
-	/* Policy: alternate between normal and high priority */
-	cond = multipipe_policy ? pipe : queue;
-
-	return ((cond % 2) != 0);
+	/* Policy: use 1st queue as high priority compute queue if we
+	 * have more than one compute queue.
+	 */
+	if (adev->gfx.num_compute_rings > 1 &&
+	    ring == &adev->gfx.compute_ring[0])
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index 6b5a8f4642cc9..72dbcd2bc6a63 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -380,7 +380,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index d86b42a365601..972ffbdf4949c 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -4494,8 +4494,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -6547,8 +6546,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 37639214cbbbd..b0284c4659ba5 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1923,8 +1923,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -4442,8 +4441,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 5f4805e4d04ac..3e800193a604b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	return amdgpu_ring_init(adev, ring, 1024,
@@ -3391,9 +3390,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev,
-							      ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 56/67] drm/amdgpu: enable only one high prio compute queue
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Nirmoy Das, amd-gfx, Alex Deucher,
	Christian König

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h |  2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c  |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c   |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   |  7 ++-----
 5 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index cd2c676a2797c..8e0a6c62322ec 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
-	int cond;
-	/* Policy: alternate between normal and high priority */
-	cond = multipipe_policy ? pipe : queue;
-
-	return ((cond % 2) != 0);
+	/* Policy: use 1st queue as high priority compute queue if we
+	 * have more than one compute queue.
+	 */
+	if (adev->gfx.num_compute_rings > 1 &&
+	    ring == &adev->gfx.compute_ring[0])
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index 6b5a8f4642cc9..72dbcd2bc6a63 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -380,7 +380,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index d86b42a365601..972ffbdf4949c 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -4494,8 +4494,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -6547,8 +6546,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 37639214cbbbd..b0284c4659ba5 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1923,8 +1923,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -4442,8 +4441,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 5f4805e4d04ac..3e800193a604b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	return amdgpu_ring_init(adev, ring, 1024,
@@ -3391,9 +3390,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev,
-							      ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 57/67] perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[]
  2021-02-24 12:49 ` Sasha Levin
                   ` (55 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jim Mattson, Peter Zijlstra, Andi Kleen, Sasha Levin

From: Jim Mattson <jmattson@google.com>

[ Upstream commit b3c3361fe325074d4144c29d46daae4fc5a268d5 ]

Cascade Lake Xeon parts have the same model number as Skylake Xeon
parts, so they are tagged with the intel_pebs_isolation
quirk. However, as with Skylake Xeon H0 stepping parts, the PEBS
isolation issue is fixed in all microcode versions.

Add the Cascade Lake Xeon steppings (5, 6, and 7) to the
isolation_ucodes[] table so that these parts benefit from Andi's
optimization in commit 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary
work in guest filtering").

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20210205191324.2889006-1-jmattson@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index d4569bfa83e30..4faaef3a8f6c4 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -4397,6 +4397,9 @@ static const struct x86_cpu_desc isolation_ucodes[] = {
 	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_X,		 2, 0x0b000014),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 3, 0x00000021),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 4, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 5, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 6, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 7, 0x00000000),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_L,		 3, 0x0000007c),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE,		 3, 0x0000007c),
 	INTEL_CPU_DESC(INTEL_FAM6_KABYLAKE,		 9, 0x0000004e),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 58/67] ASoC: Intel: sof-sdw: indent and add quirks consistently
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pierre-Louis Bossart, Guennadi Liakhovetski, Kai Vehmanen,
	Mark Brown, Sasha Levin, alsa-devel

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 8caf37e2be761688c396c609880936a807af490f ]

Use the same style for all quirks to avoid misses and errors

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 6d0d6ef711e0f..6e4b2fdb0dcf6 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -123,9 +123,10 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME,
 				  "Tiger Lake Client Platform"),
 		},
-		.driver_data = (void *)(SOF_RT711_JD_SRC_JD1 |
-				SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
-				SOF_SSP_PORT(SOF_I2S_SSP2)),
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_RT711_JD_SRC_JD1 |
+					SOF_SDW_PCH_DMIC |
+					SOF_SSP_PORT(SOF_I2S_SSP2)),
 	},
 	{
 		.callback = sof_sdw_quirk_cb,
@@ -149,7 +150,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Volteer"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 	{
@@ -158,7 +160,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Ripto"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 58/67] ASoC: Intel: sof-sdw: indent and add quirks consistently
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Kai Vehmanen, Guennadi Liakhovetski,
	Pierre-Louis Bossart, Mark Brown

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 8caf37e2be761688c396c609880936a807af490f ]

Use the same style for all quirks to avoid misses and errors

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 6d0d6ef711e0f..6e4b2fdb0dcf6 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -123,9 +123,10 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME,
 				  "Tiger Lake Client Platform"),
 		},
-		.driver_data = (void *)(SOF_RT711_JD_SRC_JD1 |
-				SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
-				SOF_SSP_PORT(SOF_I2S_SSP2)),
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_RT711_JD_SRC_JD1 |
+					SOF_SDW_PCH_DMIC |
+					SOF_SSP_PORT(SOF_I2S_SSP2)),
 	},
 	{
 		.callback = sof_sdw_quirk_cb,
@@ -149,7 +150,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Volteer"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 	{
@@ -158,7 +160,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Ripto"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 59/67] ASoC: Intel: sof_sdw: detect DMIC number based on mach params
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rander Wang, Bard Liao, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin, alsa-devel

From: Rander Wang <rander.wang@intel.com>

[ Upstream commit f88dcb9b98d3f86ead04d2453475267910448bb8 ]

Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.

Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 6e4b2fdb0dcf6..9983bf6356b1f 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -933,7 +933,7 @@ static int sof_card_dai_links_create(struct device *dev,
 		ctx->idisp_codec = true;
 
 	/* enable dmic01 & dmic16k */
-	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC) ? 2 : 0;
+	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC || mach_params->dmic_num) ? 2 : 0;
 	comp_num += dmic_num;
 
 	dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d", sdw_be_num, ssp_num,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 59/67] ASoC: Intel: sof_sdw: detect DMIC number based on mach params
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Pierre-Louis Bossart, Rander Wang,
	Mark Brown, Bard Liao

From: Rander Wang <rander.wang@intel.com>

[ Upstream commit f88dcb9b98d3f86ead04d2453475267910448bb8 ]

Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.

Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 6e4b2fdb0dcf6..9983bf6356b1f 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -933,7 +933,7 @@ static int sof_card_dai_links_create(struct device *dev,
 		ctx->idisp_codec = true;
 
 	/* enable dmic01 & dmic16k */
-	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC) ? 2 : 0;
+	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC || mach_params->dmic_num) ? 2 : 0;
 	comp_num += dmic_num;
 
 	dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d", sdw_be_num, ssp_num,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 60/67] erofs: fix shift-out-of-bounds of blkszbits
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gao Xiang, syzbot+c68f467cd7c45860e8d4, Chao Yu, Sasha Levin,
	linux-erofs

From: Gao Xiang <hsiangkao@redhat.com>

[ Upstream commit bde545295b710bdd13a0fcd4b9fddd2383eeeb3a ]

syzbot generated a crafted bitszbits which can be shifted
out-of-bounds[1]. So directly print unsupported blkszbits
instead of blksize.

[1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com

Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com
Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/erofs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index be10b16ea66ee..d5a6b9b888a56 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -158,8 +158,8 @@ static int erofs_read_superblock(struct super_block *sb)
 	blkszbits = dsb->blkszbits;
 	/* 9(512 bytes) + LOG_SECTORS_PER_BLOCK == LOG_BLOCK_SIZE */
 	if (blkszbits != LOG_BLOCK_SIZE) {
-		erofs_err(sb, "blksize %u isn't supported on this platform",
-			  1 << blkszbits);
+		erofs_err(sb, "blkszbits %u isn't supported on this platform",
+			  blkszbits);
 		goto out;
 	}
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 60/67] erofs: fix shift-out-of-bounds of blkszbits
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, syzbot+c68f467cd7c45860e8d4, linux-erofs

From: Gao Xiang <hsiangkao@redhat.com>

[ Upstream commit bde545295b710bdd13a0fcd4b9fddd2383eeeb3a ]

syzbot generated a crafted bitszbits which can be shifted
out-of-bounds[1]. So directly print unsupported blkszbits
instead of blksize.

[1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com

Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com
Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/erofs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index be10b16ea66ee..d5a6b9b888a56 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -158,8 +158,8 @@ static int erofs_read_superblock(struct super_block *sb)
 	blkszbits = dsb->blkszbits;
 	/* 9(512 bytes) + LOG_SECTORS_PER_BLOCK == LOG_BLOCK_SIZE */
 	if (blkszbits != LOG_BLOCK_SIZE) {
-		erofs_err(sb, "blksize %u isn't supported on this platform",
-			  1 << blkszbits);
+		erofs_err(sb, "blkszbits %u isn't supported on this platform",
+			  blkszbits);
 		goto out;
 	}
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 61/67] parisc: Bump 64-bit IRQ stack size to 64 KB
  2021-02-24 12:49 ` Sasha Levin
                   ` (59 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: John David Anglin, Helge Deller, Sasha Levin, linux-parisc

From: John David Anglin <dave.anglin@bell.net>

[ Upstream commit 31680c1d1595a59e17c14ec036b192a95f8e5f4a ]

Bump 64-bit IRQ stack size to 64 KB.

I had a kernel IRQ stack overflow on the mx3210 debian buildd machine.  This patch increases the
64-bit IRQ stack size to 64 KB.  The 64-bit stack size needs to be larger than the 32-bit stack
size since registers are twice as big.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/irq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 49cd6d2caefb7..1dfb439b06928 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -373,7 +373,11 @@ static inline int eirr_to_irq(unsigned long eirr)
 /*
  * IRQ STACK - used for irq handler
  */
+#ifdef CONFIG_64BIT
+#define IRQ_STACK_SIZE      (4096 << 4) /* 64k irq stack size */
+#else
 #define IRQ_STACK_SIZE      (4096 << 3) /* 32k irq stack size */
+#endif
 
 union irq_stack_union {
 	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 62/67] xen-blkback: fix error handling in xen_blkbk_map()
  2021-02-24 12:49 ` Sasha Levin
                   ` (60 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jan Beulich, Juergen Gross, Julien Grall, Sasha Levin, xen-devel,
	linux-block

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 ]

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/xen-blkback/blkback.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index 9ebf53903d7bf..9301de1386436 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -794,8 +794,13 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring,
 			pages[i]->persistent_gnt = persistent_gnt;
 		} else {
 			if (gnttab_page_cache_get(&ring->free_pages,
-						  &pages[i]->page))
-				goto out_of_memory;
+						  &pages[i]->page)) {
+				gnttab_page_cache_put(&ring->free_pages,
+						      pages_to_gnt,
+						      segs_to_map);
+				ret = -ENOMEM;
+				goto out;
+			}
 			addr = vaddr(pages[i]->page);
 			pages_to_gnt[segs_to_map] = pages[i]->page;
 			pages[i]->persistent_gnt = NULL;
@@ -882,17 +887,18 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring,
 	}
 	segs_to_map = 0;
 	last_map = map_until;
-	if (map_until != num)
+	if (!ret && map_until != num)
 		goto again;
 
-	return ret;
-
-out_of_memory:
-	pr_alert("%s: out of memory\n", __func__);
-	gnttab_page_cache_put(&ring->free_pages, pages_to_gnt, segs_to_map);
-	for (i = last_map; i < num; i++)
+out:
+	for (i = last_map; i < num; i++) {
+		/* Don't zap current batch's valid persistent grants. */
+		if(i >= last_map + segs_to_map)
+			pages[i]->persistent_gnt = NULL;
 		pages[i]->handle = BLKBACK_INVALID_HANDLE;
-	return -ENOMEM;
+	}
+
+	return ret;
 }
 
 static int xen_blkbk_map_seg(struct pending_req *pending_req)
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 63/67] sched/features: Fix hrtick reprogramming
  2021-02-24 12:49 ` Sasha Levin
                   ` (61 preceding siblings ...)
  (?)
@ 2021-02-24 12:50 ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juri Lelli, Luis Claudio R . Goncalves,
	Daniel Bristot de Oliveira, Peter Zijlstra, Ingo Molnar,
	Sasha Levin

From: Juri Lelli <juri.lelli@redhat.com>

[ Upstream commit 156ec6f42b8d300dbbf382738ff35c8bad8f4c3a ]

Hung tasks and RCU stall cases were reported on systems which were not
100% busy. Investigation of such unexpected cases (no sign of potential
starvation caused by tasks hogging the system) pointed out that the
periodic sched tick timer wasn't serviced anymore after a certain point
and that caused all machinery that depends on it (timers, RCU, etc.) to
stop working as well. This issues was however only reproducible if
HRTICK was enabled.

Looking at core dumps it was found that the rbtree of the hrtimer base
used also for the hrtick was corrupted (i.e. next as seen from the base
root and actual leftmost obtained by traversing the tree are different).
Same base is also used for periodic tick hrtimer, which might get "lost"
if the rbtree gets corrupted.

Much alike what described in commit 1f71addd34f4c ("tick/sched: Do not
mess with an enqueued hrtimer") there is a race window between
hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in
__hrtick_restart() in which the former might be operating on an already
queued hrtick hrtimer, which might lead to corruption of the base.

Use hrtick_start() (which removes the timer before enqueuing it back) to
ensure hrtick hrtimer reprogramming is entirely guarded by the base
lock, so that no race conditions can occur.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c  | 8 +++-----
 kernel/sched/sched.h | 1 +
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 22f6748c16f68..fa1f83083a58b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -355,8 +355,9 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer)
 static void __hrtick_restart(struct rq *rq)
 {
 	struct hrtimer *timer = &rq->hrtick_timer;
+	ktime_t time = rq->hrtick_time;
 
-	hrtimer_start_expires(timer, HRTIMER_MODE_ABS_PINNED_HARD);
+	hrtimer_start(timer, time, HRTIMER_MODE_ABS_PINNED_HARD);
 }
 
 /*
@@ -380,7 +381,6 @@ static void __hrtick_start(void *arg)
 void hrtick_start(struct rq *rq, u64 delay)
 {
 	struct hrtimer *timer = &rq->hrtick_timer;
-	ktime_t time;
 	s64 delta;
 
 	/*
@@ -388,9 +388,7 @@ void hrtick_start(struct rq *rq, u64 delay)
 	 * doesn't make sense and can cause timer DoS.
 	 */
 	delta = max_t(s64, delay, 10000LL);
-	time = ktime_add_ns(timer->base->get_time(), delta);
-
-	hrtimer_set_expires(timer, time);
+	rq->hrtick_time = ktime_add_ns(timer->base->get_time(), delta);
 
 	if (rq == this_rq())
 		__hrtick_restart(rq);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index bb09988451a04..282a6bbaacd73 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1031,6 +1031,7 @@ struct rq {
 	call_single_data_t	hrtick_csd;
 #endif
 	struct hrtimer		hrtick_timer;
+	ktime_t 		hrtick_time;
 #endif
 
 #ifdef CONFIG_SCHEDSTATS
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 64/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]

The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index dce2df30d4c5b..ee41f41c8184e 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -527,6 +527,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Estar Beauty HD MID 7316R */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 64/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]

The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index dce2df30d4c5b..ee41f41c8184e 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -527,6 +527,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Estar Beauty HD MID 7316R */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 65/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]

The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index ee41f41c8184e..ba8ea651a22e6 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -811,6 +811,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Voyo Winpad A15 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 65/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]

The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index ee41f41c8184e..ba8ea651a22e6 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -811,6 +811,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Voyo Winpad A15 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 66/67] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]

Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.

Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index f289ec8563a11..148b7b1bd3e8c 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 					BYT_RT5651_SSP0_AIF1 |
 					BYT_RT5651_MONO_SPEAKER),
 	},
+	{
+		/* Jumper EZpad 7 */
+		.callback = byt_rt5651_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+		.driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+					BYT_RT5651_IN2_MAP |
+					BYT_RT5651_JD_NOT_INV),
+	},
 	{
 		/* KIANO SlimNote 14.2 */
 		.callback = byt_rt5651_quirk_cb,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 66/67] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]

Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.

Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index f289ec8563a11..148b7b1bd3e8c 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 					BYT_RT5651_SSP0_AIF1 |
 					BYT_RT5651_MONO_SPEAKER),
 	},
+	{
+		/* Jumper EZpad 7 */
+		.callback = byt_rt5651_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+		.driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+					BYT_RT5651_IN2_MAP |
+					BYT_RT5651_JD_NOT_INV),
+	},
 	{
 		/* KIANO SlimNote 14.2 */
 		.callback = byt_rt5651_quirk_cb,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 67/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
  2021-02-24 12:49 ` Sasha Levin
@ 2021-02-24 12:50   ` Sasha Levin
  -1 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]

The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.

Add a quirk for the mic and jack-detect settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index ba8ea651a22e6..f00d4e417b6cf 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -402,6 +402,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Acer One 10 S1002 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.11 67/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
@ 2021-02-24 12:50   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:50 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]

The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.

Add a quirk for the mic and jack-detect settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index ba8ea651a22e6..f00d4e417b6cf 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -402,6 +402,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Acer One 10 S1002 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13
@ 2021-02-24 12:51 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (54 more replies)
  0 siblings, 55 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Borislav Petkov, Don Curtis, Sasha Levin, linux-edac

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 6c13d7ff81e6d2f01f62ccbfa49d1b8d87f274d0 ]

Those were only laptops and are very very unlikely to have ECC memory.
Currently, when the driver attempts to load, it issues:

  EDAC amd64: Error: F1 not found: device 0x1601 (broken BIOS?)

because the PCI device is the wrong one (it uses the F15h default one).

So do not load the driver on them as that is pointless.

Reported-by: Don Curtis <bugrprt21882@online.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Don Curtis <bugrprt21882@online.de>
Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1179763
Link: https://lkml.kernel.org/r/20201218160622.20146-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 620f7041db6b5..b36d5879b91e0 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -3350,10 +3350,13 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
 			fam_type = &family_types[F15_M60H_CPUS];
 			pvt->ops = &family_types[F15_M60H_CPUS].ops;
 			break;
+		/* Richland is only client */
+		} else if (pvt->model == 0x13) {
+			return NULL;
+		} else {
+			fam_type	= &family_types[F15_CPUS];
+			pvt->ops	= &family_types[F15_CPUS].ops;
 		}
-
-		fam_type	= &family_types[F15_CPUS];
-		pvt->ops	= &family_types[F15_CPUS].ops;
 		break;
 
 	case 0x16:
@@ -3547,6 +3550,7 @@ static int probe_one_instance(unsigned int nid)
 	pvt->mc_node_id	= nid;
 	pvt->F3 = F3;
 
+	ret = -ENODEV;
 	fam_type = per_family_init(pvt);
 	if (!fam_type)
 		goto err_enable;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 02/56] staging: fwserial: Fix error handling in fwserial_create
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Dinghao Liu, Greg Kroah-Hartman, Sasha Levin, devel

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fwserial/fwserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index db83d34cd6779..c368082aae1aa 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2189,6 +2189,7 @@ static int fwserial_create(struct fw_unit *unit)
 		err = fw_core_add_address_handler(&port->rx_handler,
 						  &fw_high_memory_region);
 		if (err) {
+			tty_port_destroy(&port->port);
 			kfree(port);
 			goto free_ports;
 		}
@@ -2271,6 +2272,7 @@ static int fwserial_create(struct fw_unit *unit)
 
 free_ports:
 	for (--i; i >= 0; --i) {
+		fw_core_remove_address_handler(&serial->ports[i]->rx_handler);
 		tty_port_destroy(&serial->ports[i]->port);
 		kfree(serial->ports[i]);
 	}
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 02/56] staging: fwserial: Fix error handling in fwserial_create
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Greg Kroah-Hartman, devel, Dinghao Liu

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fwserial/fwserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index db83d34cd6779..c368082aae1aa 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2189,6 +2189,7 @@ static int fwserial_create(struct fw_unit *unit)
 		err = fw_core_add_address_handler(&port->rx_handler,
 						  &fw_high_memory_region);
 		if (err) {
+			tty_port_destroy(&port->port);
 			kfree(port);
 			goto free_ports;
 		}
@@ -2271,6 +2272,7 @@ static int fwserial_create(struct fw_unit *unit)
 
 free_ports:
 	for (--i; i >= 0; --i) {
+		fw_core_remove_address_handler(&serial->ports[i]->rx_handler);
 		tty_port_destroy(&serial->ports[i]->port);
 		kfree(serial->ports[i]);
 	}
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                   ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Heiner Kallweit, Borislav Petkov, Sasha Levin

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 4b2d8ca9208be636b30e924b1cbcb267b0740c93 ]

On this system the M.2 PCIe WiFi card isn't detected after reboot, only
after cold boot. reboot=pci fixes this behavior. In [0] the same issue
is described, although on another system and with another Intel WiFi
card. In case it's relevant, both systems have Celeron CPUs.

Add a PCI reboot quirk on affected systems until a more generic fix is
available.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202399

 [ bp: Massage commit message. ]

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/reboot.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index db115943e8bdc..9991c5920aace 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -477,6 +477,15 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = {
 		},
 	},
 
+	{	/* PCIe Wifi card isn't detected after reboot otherwise */
+		.callback = set_pci_reboot,
+		.ident = "Zotac ZBOX CI327 nano",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "NA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZBOX-CI327NANO-GS-01"),
+		},
+	},
+
 	/* Sony */
 	{	/* Handle problems with rebooting on Sony VGN-Z540N */
 		.callback = set_bios_reboot,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 05/56] wlcore: Fix command execute failure 19 for wl12xx Sasha Levin
                   ` (51 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jiri Slaby, Greg Kroah-Hartman, Sasha Levin

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ]

The constant 20 makes the font sum computation signed which can lead to
sign extensions and signed wraps. It's not much of a problem as we build
with -fno-strict-overflow. But if we ever decide not to, be ready, so
switch the constant to unsigned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vt/consolemap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 5d778c0aa0091..8ba0dc51a1f17 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -495,7 +495,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
 
 	p2[unicode & 0x3f] = fontpos;
 	
-	p->sum += (fontpos << 20) + unicode;
+	p->sum += (fontpos << 20U) + unicode;
 
 	return 0;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 05/56] wlcore: Fix command execute failure 19 for wl12xx
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (2 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 06/56] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl Sasha Levin
                   ` (50 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tony Lindgren, Raz Bouganim, Kalle Valo, Sasha Levin,
	linux-wireless, netdev

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ]

We can currently get a "command execute failure 19" error on beacon loss
if the signal is weak:

wlcore: Beacon loss detected. roles:0xff
wlcore: Connection loss work (role_id: 0).
...
wlcore: ERROR command execute failure 19
...
WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803
...
(wl12xx_queue_recovery_work.part.0 [wlcore])
(wl12xx_cmd_role_start_sta [wlcore])
(wl1271_op_bss_info_changed [wlcore])
(ieee80211_prep_connection [mac80211])

Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware,
and seems to mean that the firmware no longer wants to see the quirk
handling for WLCORE_QUIRK_START_STA_FAILS done.

This quirk got added with commit 18eab430700d ("wlcore: workaround
start_sta problem in wl12xx fw"), and it seems that this already got fixed
in the firmware long time ago back in 2012 as wl18xx never had this quirk
in place to start with.

As we no longer even support firmware that early, to me it seems that it's
safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks
like earlier firmware got disabled back in 2013 with commit 0e284c074ef9
("wl12xx: increase minimum singlerole firmware version required").

If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any
firmware that the driver works with, we can simply revert this patch and
add extra checks for firmware version used.

With this fix wlcore reconnects properly after a beacon loss.

Cc: Raz Bouganim <r-bouganim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl12xx/main.c   |  3 ---
 drivers/net/wireless/ti/wlcore/main.c   | 15 +--------------
 drivers/net/wireless/ti/wlcore/wlcore.h |  3 ---
 3 files changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 3c9c623bb4283..9d7dbfe7fe0c3 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -635,7 +635,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 		wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
 		wl->mr_fw_name = WL127X_FW_NAME_MULTI;
@@ -659,7 +658,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 		wl->plt_fw_name = WL127X_PLT_FW_NAME;
 		wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
@@ -688,7 +686,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 
 		wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 6863fd552d5e7..6e402d62dbe4a 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2872,21 +2872,8 @@ static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	if (is_ibss)
 		ret = wl12xx_cmd_role_start_ibss(wl, wlvif);
-	else {
-		if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) {
-			/*
-			 * TODO: this is an ugly workaround for wl12xx fw
-			 * bug - we are not able to tx/rx after the first
-			 * start_sta, so make dummy start+stop calls,
-			 * and then call start_sta again.
-			 * this should be fixed in the fw.
-			 */
-			wl12xx_cmd_role_start_sta(wl, wlvif);
-			wl12xx_cmd_role_stop_sta(wl, wlvif);
-		}
-
+	else
 		ret = wl12xx_cmd_role_start_sta(wl, wlvif);
-	}
 
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index b7821311ac75b..81c94d390623b 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -547,9 +547,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip,
 /* Each RX/TX transaction requires an end-of-transaction transfer */
 #define WLCORE_QUIRK_END_OF_TRANSACTION		BIT(0)
 
-/* the first start_role(sta) sometimes doesn't work on wl12xx */
-#define WLCORE_QUIRK_START_STA_FAILS		BIT(1)
-
 /* wl127x and SPI don't support SDIO block size alignment */
 #define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN		BIT(2)
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 06/56] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (3 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 05/56] wlcore: Fix command execute failure 19 for wl12xx Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 07/56] Bluetooth: btusb: fix memory leak on suspend and resume Sasha Levin
                   ` (49 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Claire Chang, Marcel Holtmann, Sasha Levin, linux-bluetooth

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ]

Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry
at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_h5.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 78d635f1d1567..996729e78105a 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -906,6 +906,11 @@ static int h5_btrtl_setup(struct h5 *h5)
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
 
+	/* Enable controller to do both LE scan and BR/EDR inquiry
+	 * simultaneously.
+	 */
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
+
 out_free:
 	btrtl_free(btrtl_dev);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 07/56] Bluetooth: btusb: fix memory leak on suspend and resume
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (4 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 06/56] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (48 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Vamshi K Sthambamkadi, Marcel Holtmann, Sasha Levin,
	linux-bluetooth, netdev

From: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>

[ Upstream commit 5ff20cbe6752a5bc06ff58fee8aa11a0d5075819 ]

kmemleak report:
unreferenced object 0xffff9b1127f00500 (size 208):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00  .`..............
  backtrace:
    [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480
    [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0
    [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
    [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
    [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
    [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
    [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b1125c6ee00 (size 512):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 32 bytes):
    04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270
    [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330
    [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90
    [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0
    [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
    [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
    [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
    [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
    [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b112b395788 (size 8):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 8 bytes):
    20 00 00 00 00 00 04 00                           .......
  backtrace:
    [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460
    [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb]
    [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb]
    [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth]
    [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30

In pm sleep-resume context, while the btusb device rebinds, it enters
hci_unregister_dev(), whilst there is a possibility of hdev receiving
PM_POST_SUSPEND suspend_notifier event, leading to generation of msg
frames. When hci_unregister_dev() completes, i.e. hdev context is
destroyed/freed, those intermittently sent msg frames cause memory
leak.

BUG details:
Below is stack trace of thread that enters hci_unregister_dev(), marks
the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier
lock - refer unregister_pm_notifier().

  hci_unregister_dev+0xa5/0x320 [bluetoot]
  btusb_disconnect+0x68/0x150 [btusb]
  usb_unbind_interface+0x77/0x250
  ? kernfs_remove_by_name_ns+0x75/0xa0
  device_release_driver_internal+0xfe/0x1
  device_release_driver+0x12/0x20
  bus_remove_device+0xe1/0x150
  device_del+0x192/0x3e0
  ? usb_remove_ep_devs+0x1f/0x30
  usb_disable_device+0x92/0x1b0
  usb_disconnect+0xc2/0x270
  hub_event+0x9f6/0x15d0
  ? rpm_idle+0x23/0x360
  ? rpm_idle+0x26b/0x360
  process_one_work+0x209/0x3b0
  worker_thread+0x34/0x400
  ? process_one_work+0x3b0/0x3b0
  kthread+0x126/0x140
  ? kthread_park+0x90/0x90
  ret_from_fork+0x22/0x30

Below is stack trace of thread executing hci_suspend_notifier() which
processes the PM_POST_SUSPEND event, while the unbinding thread is
waiting on lock.

  hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth]
  blocking_notifier_call_chain+0x69/0x90
  pm_notifier_call_chain+0x1a/0x20
  pm_suspend.cold.9+0x334/0x352
  state_store+0x84/0xf0
  kobj_attr_store+0x12/0x20
  sysfs_kf_write+0x3b/0x40
  kernfs_fop_write+0xda/0x1c0
  vfs_write+0xbb/0x250
  ksys_write+0x61/0xe0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x37/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER
is set.

Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index c4aa2cbb92697..a8679cc468abc 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3527,7 +3527,8 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
 	}
 
 	/* Suspend notifier should only act on events when powered. */
-	if (!hdev_is_powered(hdev))
+	if (!hdev_is_powered(hdev) ||
+	    hci_dev_test_flag(hdev, HCI_UNREGISTER))
 		goto done;
 
 	if (action == PM_SUSPEND_PREPARE) {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 08/56] mt76: mt7615: reset token when mac_reset happens
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                     ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ryder Lee, Felix Fietkau, Sasha Levin, linux-wireless, netdev,
	linux-arm-kernel, linux-mediatek

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]

Reset token in mt7615_mac_reset_work() to avoid possible leakege.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 20 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |  2 +-
 .../wireless/mediatek/mt76/mt7615/pci_init.c  | 12 +----------
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 3d62fda067e44..f1f954ff46856 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2098,6 +2098,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
 }
 EXPORT_SYMBOL_GPL(mt7615_dma_reset);
 
+void mt7615_tx_token_put(struct mt7615_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7615_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb)
+			dev_kfree_skb_any(txwi->skb);
+		mt76_put_txwi(&dev->mt76, txwi);
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+EXPORT_SYMBOL_GPL(mt7615_tx_token_put);
+
 void mt7615_mac_reset_work(struct work_struct *work)
 {
 	struct mt7615_phy *phy2;
@@ -2141,6 +2158,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
 
+	mt7615_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7615_dma_reset(dev);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 6a9f9187f76ac..5b06294d654aa 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -619,7 +619,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct mt76_tx_info *tx_info);
 
 void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
-
+void mt7615_tx_token_put(struct mt7615_dev *dev);
 void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
 void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 06a0f8f7bc893..7b81aef3684ed 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -153,9 +153,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
 
 void mt7615_unregister_device(struct mt7615_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
 	bool mcu_running;
-	int id;
 
 	mcu_running = mt7615_wait_for_mcu_init(dev);
 
@@ -165,15 +163,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
 		mt7615_mcu_exit(dev);
 	mt7615_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7615_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb)
-			dev_kfree_skb_any(txwi->skb);
-		mt76_put_txwi(&dev->mt76, txwi);
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7615_tx_token_put(dev);
 
 	tasklet_disable(&dev->irq_tasklet);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 08/56] mt76: mt7615: reset token when mac_reset happens
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Ryder Lee, netdev, linux-wireless, linux-mediatek,
	linux-arm-kernel, Felix Fietkau

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]

Reset token in mt7615_mac_reset_work() to avoid possible leakege.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 20 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |  2 +-
 .../wireless/mediatek/mt76/mt7615/pci_init.c  | 12 +----------
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 3d62fda067e44..f1f954ff46856 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2098,6 +2098,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
 }
 EXPORT_SYMBOL_GPL(mt7615_dma_reset);
 
+void mt7615_tx_token_put(struct mt7615_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7615_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb)
+			dev_kfree_skb_any(txwi->skb);
+		mt76_put_txwi(&dev->mt76, txwi);
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+EXPORT_SYMBOL_GPL(mt7615_tx_token_put);
+
 void mt7615_mac_reset_work(struct work_struct *work)
 {
 	struct mt7615_phy *phy2;
@@ -2141,6 +2158,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
 
+	mt7615_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7615_dma_reset(dev);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 6a9f9187f76ac..5b06294d654aa 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -619,7 +619,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct mt76_tx_info *tx_info);
 
 void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
-
+void mt7615_tx_token_put(struct mt7615_dev *dev);
 void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
 void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 06a0f8f7bc893..7b81aef3684ed 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -153,9 +153,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
 
 void mt7615_unregister_device(struct mt7615_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
 	bool mcu_running;
-	int id;
 
 	mcu_running = mt7615_wait_for_mcu_init(dev);
 
@@ -165,15 +163,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
 		mt7615_mcu_exit(dev);
 	mt7615_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7615_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb)
-			dev_kfree_skb_any(txwi->skb);
-		mt76_put_txwi(&dev->mt76, txwi);
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7615_tx_token_put(dev);
 
 	tasklet_disable(&dev->irq_tasklet);
 
-- 
2.27.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 08/56] mt76: mt7615: reset token when mac_reset happens
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Ryder Lee, netdev, linux-wireless, linux-mediatek,
	linux-arm-kernel, Felix Fietkau

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]

Reset token in mt7615_mac_reset_work() to avoid possible leakege.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 20 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |  2 +-
 .../wireless/mediatek/mt76/mt7615/pci_init.c  | 12 +----------
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 3d62fda067e44..f1f954ff46856 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2098,6 +2098,23 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
 }
 EXPORT_SYMBOL_GPL(mt7615_dma_reset);
 
+void mt7615_tx_token_put(struct mt7615_dev *dev)
+{
+	struct mt76_txwi_cache *txwi;
+	int id;
+
+	spin_lock_bh(&dev->token_lock);
+	idr_for_each_entry(&dev->token, txwi, id) {
+		mt7615_txp_skb_unmap(&dev->mt76, txwi);
+		if (txwi->skb)
+			dev_kfree_skb_any(txwi->skb);
+		mt76_put_txwi(&dev->mt76, txwi);
+	}
+	spin_unlock_bh(&dev->token_lock);
+	idr_destroy(&dev->token);
+}
+EXPORT_SYMBOL_GPL(mt7615_tx_token_put);
+
 void mt7615_mac_reset_work(struct work_struct *work)
 {
 	struct mt7615_phy *phy2;
@@ -2141,6 +2158,9 @@ void mt7615_mac_reset_work(struct work_struct *work)
 
 	mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_PDMA_STOPPED);
 
+	mt7615_tx_token_put(dev);
+	idr_init(&dev->token);
+
 	if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
 		mt7615_dma_reset(dev);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 6a9f9187f76ac..5b06294d654aa 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -619,7 +619,7 @@ int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 			  struct mt76_tx_info *tx_info);
 
 void mt7615_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
-
+void mt7615_tx_token_put(struct mt7615_dev *dev);
 void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
 			 struct sk_buff *skb);
 void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 06a0f8f7bc893..7b81aef3684ed 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -153,9 +153,7 @@ int mt7615_register_device(struct mt7615_dev *dev)
 
 void mt7615_unregister_device(struct mt7615_dev *dev)
 {
-	struct mt76_txwi_cache *txwi;
 	bool mcu_running;
-	int id;
 
 	mcu_running = mt7615_wait_for_mcu_init(dev);
 
@@ -165,15 +163,7 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
 		mt7615_mcu_exit(dev);
 	mt7615_dma_cleanup(dev);
 
-	spin_lock_bh(&dev->token_lock);
-	idr_for_each_entry(&dev->token, txwi, id) {
-		mt7615_txp_skb_unmap(&dev->mt76, txwi);
-		if (txwi->skb)
-			dev_kfree_skb_any(txwi->skb);
-		mt76_put_txwi(&dev->mt76, txwi);
-	}
-	spin_unlock_bh(&dev->token_lock);
-	idr_destroy(&dev->token);
+	mt7615_tx_token_put(dev);
 
 	tasklet_disable(&dev->irq_tasklet);
 
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 09/56] pktgen: fix misuse of BUG_ON() in pktgen_thread_worker()
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (6 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (46 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Di Zhu, Jakub Kicinski, Sasha Levin, netdev

From: Di Zhu <zhudi21@huawei.com>

[ Upstream commit 275b1e88cabb34dbcbe99756b67e9939d34a99b6 ]

pktgen create threads for all online cpus and bond these threads to
relevant cpu repecivtily. when this thread firstly be woken up, it
will compare cpu currently running with the cpu specified at the time
of creation and if the two cpus are not equal, BUG_ON() will take effect
causing panic on the system.
Notice that these threads could be migrated to other cpus before start
running because of the cpu hotplug after these threads have created. so the
BUG_ON() used here seems unreasonable and we can replace it with WARN_ON()
to just printf a warning other than panic the system.

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/pktgen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 105978604ffdb..3fba429f1f57b 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3464,7 +3464,7 @@ static int pktgen_thread_worker(void *arg)
 	struct pktgen_dev *pkt_dev = NULL;
 	int cpu = t->cpu;
 
-	BUG_ON(smp_processor_id() != cpu);
+	WARN_ON(smp_processor_id() != cpu);
 
 	init_waitqueue_head(&t->queue);
 	complete(&t->start_done);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 10/56] ath10k: fix wmi mgmt tx queue full due to race condition
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Miaoqing Pan, Brian Norris, Kalle Valo, Sasha Levin, ath10k,
	linux-wireless, netdev

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]

Failed to transmit wmi management frames:

[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28

This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,

  CPUx (skb_deuque)			CPUy (__skb_queue_tail)
					next=list
					prev=list
  struct sk_buff *skb = skb_peek(list);	WRITE_ONCE(newsk->next, next);
  WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
  next       = skb->next;		WRITE_ONCE(next->prev, newsk);
  prev       = skb->prev;		WRITE_ONCE(prev->next, newsk);
  skb->next  = skb->prev = NULL;	list->qlen++;
  WRITE_ONCE(next->prev, prev);
  WRITE_ONCE(prev->next, next);

If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.

So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2e3eb5bbe49c8..ced664eaffb41 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3763,23 +3763,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
 static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
-	int ret = 0;
-
-	spin_lock_bh(&ar->data_lock);
 
-	if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+	if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) {
 		ath10k_warn(ar, "wmi mgmt tx queue is full\n");
-		ret = -ENOSPC;
-		goto unlock;
+		return -ENOSPC;
 	}
 
-	__skb_queue_tail(q, skb);
+	skb_queue_tail(q, skb);
 	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
 
-unlock:
-	spin_unlock_bh(&ar->data_lock);
-
-	return ret;
+	return 0;
 }
 
 static enum ath10k_mac_tx_path
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 10/56] ath10k: fix wmi mgmt tx queue full due to race condition
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Miaoqing Pan, netdev, Brian Norris, linux-wireless,
	ath10k, Kalle Valo

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]

Failed to transmit wmi management frames:

[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28

This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,

  CPUx (skb_deuque)			CPUy (__skb_queue_tail)
					next=list
					prev=list
  struct sk_buff *skb = skb_peek(list);	WRITE_ONCE(newsk->next, next);
  WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
  next       = skb->next;		WRITE_ONCE(next->prev, newsk);
  prev       = skb->prev;		WRITE_ONCE(prev->next, newsk);
  skb->next  = skb->prev = NULL;	list->qlen++;
  WRITE_ONCE(next->prev, prev);
  WRITE_ONCE(prev->next, next);

If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.

So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2e3eb5bbe49c8..ced664eaffb41 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3763,23 +3763,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
 static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
-	int ret = 0;
-
-	spin_lock_bh(&ar->data_lock);
 
-	if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+	if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) {
 		ath10k_warn(ar, "wmi mgmt tx queue is full\n");
-		ret = -ENOSPC;
-		goto unlock;
+		return -ENOSPC;
 	}
 
-	__skb_queue_tail(q, skb);
+	skb_queue_tail(q, skb);
 	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
 
-unlock:
-	spin_unlock_bh(&ar->data_lock);
-
-	return ret;
+	return 0;
 }
 
 static enum ath10k_mac_tx_path
-- 
2.27.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 11/56] x86/build: Treat R_386_PLT32 relocation as R_386_PC32
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (8 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 12/56] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Sasha Levin
                   ` (44 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Fangrui Song, Arnd Bergmann, Borislav Petkov, Nick Desaulniers,
	Nathan Chancellor, Sedat Dilek, Sasha Levin, clang-built-linux

From: Fangrui Song <maskray@google.com>

[ Upstream commit bb73d07148c405c293e576b40af37737faf23a6a ]

This is similar to commit

  b21ebf2fb4cd ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32")

but for i386. As far as the kernel is concerned, R_386_PLT32 can be
treated the same as R_386_PC32.

R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which
can only be used by branches. If the referenced symbol is defined
externally, a PLT will be used.

R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be
used by address taking operations and branches. If the referenced symbol
is defined externally, a copy relocation/canonical PLT entry will be
created in the executable.

On x86-64, there is no PIC vs non-PIC PLT distinction and an
R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and
`call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler.
This avoids canonical PLT entries (st_shndx=0, st_value!=0).

On i386, there are 2 types of PLTs, PIC and non-PIC. Currently,
the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and
R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries
are possible ABI issues but GCC/GNU as will likely keep the status
quo because (1) the ABI is legacy (2) the change will drop a GNU
ld diagnostic for non-default visibility ifunc in shared objects.

clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler
generated function declarations, because preventing canonical PLT
entries is weighed over the rare ifunc diagnostic.

Further info for the more interested:

  https://github.com/ClangBuiltLinux/linux/issues/1210
  https://sourceware.org/bugzilla/show_bug.cgi?id=27169
  https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6 [1]

 [ bp: Massage commit message. ]

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/module.c |  1 +
 arch/x86/tools/relocs.c  | 12 ++++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 34b153cbd4acb..5e9a34b5bd741 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -114,6 +114,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
 			*location += sym->st_value;
 			break;
 		case R_386_PC32:
+		case R_386_PLT32:
 			/* Add the value, subtract its position */
 			*location += sym->st_value - (uint32_t)location;
 			break;
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index ce7188cbdae58..1c3a1962cade6 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -867,9 +867,11 @@ static int do_reloc32(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
@@ -910,9 +912,11 @@ static int do_reloc_real(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 12/56] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (9 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 11/56] x86/build: Treat R_386_PLT32 relocation as R_386_PC32 Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-25 19:03   ` [PATCH AUTOSEL 5.11 16/67] " Pali Rohár
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 13/56] Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk Sasha Levin
                   ` (43 subsequent siblings)
  54 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Pali Rohár, Jakub Kicinski, Sasha Levin, netdev

From: Pali Rohár <pali@kernel.org>

[ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]

The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information
stored in its EEPROM. It claims to support all transceiver types including
10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is
the only one supported.

This module has also phys_id set to SFF, and the SFP subsystem currently
does not allow to use SFP modules detected as SFFs. Add exception for this
module so it can be detected as supported.

This change finally allows to detect and use SFP GPON module Ubiquiti
U-Fiber Instant on Linux system.

EEPROM content of this SFP module is (where XX is serial number):

00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8    ???........??.??
10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20    ....UBNT
20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41        .??)UF-INSTA
30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36    NT      4   ??.6
40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX    .?..UBNTXXXXXXXX
50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41        140123  `??A

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp-bus.c | 15 +++++++++++++++
 drivers/net/phy/sfp.c     | 17 +++++++++++++++--
 2 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 58014feedf6c8..fb954e8141802 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
 	phylink_set(modes, 2500baseX_Full);
 }
 
+static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
+				      unsigned long *modes)
+{
+	/* Ubiquiti U-Fiber Instant module claims that support all transceiver
+	 * types including 10G Ethernet which is not truth. So clear all claimed
+	 * modes and set only one mode which module supports: 1000baseX_Full.
+	 */
+	phylink_zero(modes);
+	phylink_set(modes, 1000baseX_Full);
+}
+
 static const struct sfp_quirk sfp_quirks[] = {
 	{
 		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
@@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 		.vendor = "HUAWEI",
 		.part = "MA5671A",
 		.modes = sfp_quirk_2500basex,
+	}, {
+		.vendor = "UBNT",
+		.part = "UF-INSTANT",
+		.modes = sfp_quirk_ubnt_uf_instant,
 	},
 };
 
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 34aa196b7465c..d8a809cf20c15 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -272,8 +272,21 @@ static const struct sff_data sff_data = {
 
 static bool sfp_module_supported(const struct sfp_eeprom_id *id)
 {
-	return id->base.phys_id == SFF8024_ID_SFP &&
-	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
+	if (id->base.phys_id == SFF8024_ID_SFP &&
+	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP)
+		return true;
+
+	/* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored
+	 * phys id SFF instead of SFP. Therefore mark this module explicitly
+	 * as supported based on vendor name and pn match.
+	 */
+	if (id->base.phys_id == SFF8024_ID_SFF_8472 &&
+	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP &&
+	    !memcmp(id->base.vendor_name, "UBNT            ", 16) &&
+	    !memcmp(id->base.vendor_pn, "UF-INSTANT      ", 16))
+		return true;
+
+	return false;
 }
 
 static const struct sff_data sfp_data = {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 13/56] Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (10 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 12/56] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 14/56] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data Sasha Levin
                   ` (42 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Abhishek Pandit-Subedi, Marcel Holtmann,
	Sasha Levin, linux-bluetooth, netdev

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 219991e6be7f4a31d471611e265b72f75b2d0538 ]

Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices,
completely drop from the bus on a system-suspend. These devices will
have their driver unbound and rebound on resume (when the dropping of
the bus gets detected) and will show up as a new HCI after resume.

These devices do not benefit from the suspend / resume handling work done
by the hci_suspend_notifier. At best this unnecessarily adds some time to
the suspend/resume time. But this may also actually cause problems, if the
code doing the driver unbinding runs after the pm-notifier then the
hci_suspend_notifier code will try to talk to a device which is now in
an uninitialized state.

This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows
drivers to opt-out of the hci_suspend_notifier when they know beforehand
that their device will be fully re-initialized / reprobed on resume.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h |  8 ++++++++
 net/bluetooth/hci_core.c    | 18 +++++++++++-------
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c8e67042a3b14..6da4b3c5dd55d 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -238,6 +238,14 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_ERR_DATA_REPORTING,
+
+	/*
+	 * When this quirk is set, then the hci_suspend_notifier is not
+	 * registered. This is intended for devices which drop completely
+	 * from the bus on system-suspend and which will show up as a new
+	 * HCI after resume.
+	 */
+	HCI_QUIRK_NO_SUSPEND_NOTIFIER,
 };
 
 /* HCI device flags */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index a8679cc468abc..211062a86a3a8 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3783,10 +3783,12 @@ int hci_register_dev(struct hci_dev *hdev)
 	hci_sock_dev_event(hdev, HCI_DEV_REG);
 	hci_dev_hold(hdev);
 
-	hdev->suspend_notifier.notifier_call = hci_suspend_notifier;
-	error = register_pm_notifier(&hdev->suspend_notifier);
-	if (error)
-		goto err_wqueue;
+	if (!test_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks)) {
+		hdev->suspend_notifier.notifier_call = hci_suspend_notifier;
+		error = register_pm_notifier(&hdev->suspend_notifier);
+		if (error)
+			goto err_wqueue;
+	}
 
 	queue_work(hdev->req_workqueue, &hdev->power_on);
 
@@ -3821,9 +3823,11 @@ void hci_unregister_dev(struct hci_dev *hdev)
 
 	cancel_work_sync(&hdev->power_on);
 
-	hci_suspend_clear_tasks(hdev);
-	unregister_pm_notifier(&hdev->suspend_notifier);
-	cancel_work_sync(&hdev->suspend_prepare);
+	if (!test_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks)) {
+		hci_suspend_clear_tasks(hdev);
+		unregister_pm_notifier(&hdev->suspend_notifier);
+		cancel_work_sync(&hdev->suspend_prepare);
+	}
 
 	hci_dev_do_close(hdev);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 14/56] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (11 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 13/56] Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (41 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gopal Tiwari, Marcel Holtmann, Sasha Levin, linux-bluetooth, netdev

From: Gopal Tiwari <gtiwari@redhat.com>

[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ]

kernel panic trace looks like:

 #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
    [exception RIP: amp_read_loc_assoc_final_data+63]
    RIP: ffffffffc06ab54f  RSP: ffffb9e08698fd68  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff8c8845a5a000  RCX: 0000000000000004
    RDX: 0000000000000000  RSI: ffff8c8b9153d000  RDI: ffff8c8845a5a000
    RBP: ffffb9e08698fe40   R8: 00000000000330e0   R9: ffffffffc0675c94
    R10: ffffb9e08698fe58  R11: 0000000000000001  R12: ffff8c8b9cbf6200
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff8c8b2026da0b
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
 #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
 #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7

hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data

        set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);

Fixed by checking NULL for mgr.

Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/amp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c
index 9c711f0dfae35..be2d469d6369d 100644
--- a/net/bluetooth/amp.c
+++ b/net/bluetooth/amp.c
@@ -297,6 +297,9 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
 	struct hci_request req;
 	int err;
 
+	if (!mgr)
+		return;
+
 	cp.phy_handle = hcon->handle;
 	cp.len_so_far = cpu_to_le16(0);
 	cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 15/56] staging: most: sound: add sanity check for function argument
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Christian Gromm, Dan Carpenter, Greg Kroah-Hartman, Sasha Levin, devel

From: Christian Gromm <christian.gromm@microchip.com>

[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/most/sound/sound.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/most/sound/sound.c b/drivers/staging/most/sound/sound.c
index 8a449ab9bdce4..b7666a7b1760a 100644
--- a/drivers/staging/most/sound/sound.c
+++ b/drivers/staging/most/sound/sound.c
@@ -96,6 +96,8 @@ static void swap_copy24(u8 *dest, const u8 *source, unsigned int bytes)
 {
 	unsigned int i = 0;
 
+	if (bytes < 2)
+		return;
 	while (i < bytes - 2) {
 		dest[i] = source[i + 2];
 		dest[i + 1] = source[i + 1];
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 15/56] staging: most: sound: add sanity check for function argument
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Christian Gromm, devel, Dan Carpenter, Greg Kroah-Hartman

From: Christian Gromm <christian.gromm@microchip.com>

[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/most/sound/sound.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/most/sound/sound.c b/drivers/staging/most/sound/sound.c
index 8a449ab9bdce4..b7666a7b1760a 100644
--- a/drivers/staging/most/sound/sound.c
+++ b/drivers/staging/most/sound/sound.c
@@ -96,6 +96,8 @@ static void swap_copy24(u8 *dest, const u8 *source, unsigned int bytes)
 {
 	unsigned int i = 0;
 
+	if (bytes < 2)
+		return;
 	while (i < bytes - 2) {
 		dest[i] = source[i + 2];
 		dest[i + 1] = source[i + 1];
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 16/56] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                     ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juerg Haefliger, Juerg Haefliger, Greg Kroah-Hartman,
	Sasha Levin, devel, bcm-kernel-feedback-list, linux-rpi-kernel,
	linux-arm-kernel

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +-
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c     | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 4c2cae99776b9..3703409715dab 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
 {
 	int err;
 
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl);
 	if (err < 0)
 		return err;
@@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
 
 int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl),
 			   snd_bcm2835_headphones_ctl);
 }
@@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
 
 int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi),
 			   snd_bcm2835_hdmi);
 }
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f783b632141b5..096f2c54258aa 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 
 	pcm->private_data = chip;
 	pcm->nonatomic = true;
-	strcpy(pcm->name, name);
+	strscpy(pcm->name, name, sizeof(pcm->name));
 	if (!spdif) {
 		chip->dest = route;
 		chip->volume = 0;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index cf5f80f5ca6b0..c250fbef2fa3d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev,
 		goto error;
 	}
 
-	strcpy(card->driver, audio_driver->driver.name);
-	strcpy(card->shortname, audio_driver->shortname);
-	strcpy(card->longname, audio_driver->longname);
+	strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver));
+	strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname));
+	strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
 
 	err = audio_driver->newpcm(chip, audio_driver->shortname,
 		audio_driver->route,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 16/56] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devel, Greg Kroah-Hartman, Juerg Haefliger,
	bcm-kernel-feedback-list, linux-rpi-kernel, Juerg Haefliger,
	linux-arm-kernel

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +-
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c     | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 4c2cae99776b9..3703409715dab 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
 {
 	int err;
 
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl);
 	if (err < 0)
 		return err;
@@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
 
 int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl),
 			   snd_bcm2835_headphones_ctl);
 }
@@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
 
 int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi),
 			   snd_bcm2835_hdmi);
 }
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f783b632141b5..096f2c54258aa 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 
 	pcm->private_data = chip;
 	pcm->nonatomic = true;
-	strcpy(pcm->name, name);
+	strscpy(pcm->name, name, sizeof(pcm->name));
 	if (!spdif) {
 		chip->dest = route;
 		chip->volume = 0;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index cf5f80f5ca6b0..c250fbef2fa3d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev,
 		goto error;
 	}
 
-	strcpy(card->driver, audio_driver->driver.name);
-	strcpy(card->shortname, audio_driver->shortname);
-	strcpy(card->longname, audio_driver->longname);
+	strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver));
+	strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname));
+	strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
 
 	err = audio_driver->newpcm(chip, audio_driver->shortname,
 		audio_driver->route,
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 16/56] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devel, Greg Kroah-Hartman, Juerg Haefliger,
	bcm-kernel-feedback-list, linux-rpi-kernel, Juerg Haefliger,
	linux-arm-kernel

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ]

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[   58.480634] ------------[ cut here ]------------
[   58.485321] kernel BUG at lib/string.c:1149!
[   58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[   58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G         C OE     5.11.0-1001-raspi #1
[   58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[   58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   58.584178] pc : fortify_panic+0x20/0x24
[   58.588161] lr : fortify_panic+0x20/0x24
[   58.592136] sp : ffff800010a83990
[   58.595491] x29: ffff800010a83990 x28: 0000000000000002
[   58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[   58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[   58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[   58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[   58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[   58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[   58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[   58.638588] x13: 0720072007200720 x12: 0720072007200720
[   58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[   58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[   58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[   58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[   58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[   58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[   58.676299] Call trace:
[   58.678775]  fortify_panic+0x20/0x24
[   58.682402]  snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[   58.688247]  platform_probe+0x74/0xe4
[   58.691963]  really_probe+0xf0/0x510
[   58.695585]  driver_probe_device+0xe0/0x100
[   58.699826]  device_driver_attach+0xcc/0xd4
[   58.704068]  __driver_attach+0xb0/0x17c
[   58.707956]  bus_for_each_dev+0x7c/0xd4
[   58.711843]  driver_attach+0x30/0x40
[   58.715467]  bus_add_driver+0x154/0x250
[   58.719354]  driver_register+0x84/0x140
[   58.723242]  __platform_driver_register+0x34/0x40
[   58.728013]  bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[   58.734024]  do_one_initcall+0x54/0x300
[   58.737914]  do_init_module+0x60/0x280
[   58.741719]  load_module+0x680/0x770
[   58.745344]  __do_sys_finit_module+0xbc/0x130
[   58.749761]  __arm64_sys_finit_module+0x2c/0x40
[   58.754356]  el0_svc_common.constprop.0+0x88/0x220
[   58.759216]  do_el0_svc+0x30/0xa0
[   58.762575]  el0_svc+0x28/0x70
[   58.765669]  el0_sync_handler+0x1a4/0x1b0
[   58.769732]  el0_sync+0x178/0x180
[   58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[   58.779275] ---[ end trace 29be5b17497bd898 ]---
[   58.783955] note: insmod[1959] exited with preempt_count 1
[   58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +++---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +-
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c     | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
index 4c2cae99776b9..3703409715dab 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c
@@ -224,7 +224,7 @@ int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
 {
 	int err;
 
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl);
 	if (err < 0)
 		return err;
@@ -261,7 +261,7 @@ static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = {
 
 int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl),
 			   snd_bcm2835_headphones_ctl);
 }
@@ -295,7 +295,7 @@ static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = {
 
 int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip)
 {
-	strcpy(chip->card->mixername, "Broadcom Mixer");
+	strscpy(chip->card->mixername, "Broadcom Mixer", sizeof(chip->card->mixername));
 	return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi),
 			   snd_bcm2835_hdmi);
 }
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index f783b632141b5..096f2c54258aa 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -334,7 +334,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 
 	pcm->private_data = chip;
 	pcm->nonatomic = true;
-	strcpy(pcm->name, name);
+	strscpy(pcm->name, name, sizeof(pcm->name));
 	if (!spdif) {
 		chip->dest = route;
 		chip->volume = 0;
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index cf5f80f5ca6b0..c250fbef2fa3d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -185,9 +185,9 @@ static int snd_add_child_device(struct device *dev,
 		goto error;
 	}
 
-	strcpy(card->driver, audio_driver->driver.name);
-	strcpy(card->shortname, audio_driver->shortname);
-	strcpy(card->longname, audio_driver->longname);
+	strscpy(card->driver, audio_driver->driver.name, sizeof(card->driver));
+	strscpy(card->shortname, audio_driver->shortname, sizeof(card->shortname));
+	strscpy(card->longname, audio_driver->longname, sizeof(card->longname));
 
 	err = audio_driver->newpcm(chip, audio_driver->shortname,
 		audio_driver->route,
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 17/56] brcmfmac: Add DMI nvram filename quirk for Predia Basic tablet
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (14 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 18/56] brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tablet Sasha Levin
                   ` (38 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Kalle Valo, Sasha Levin, linux-wireless,
	brcm80211-dev-list.pdl, SHA-cyfmac-dev-list, netdev

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit af4b3a6f36d6c2fc5fca026bccf45e0fdcabddd9 ]

The Predia Basic tablet contains quite generic names in the sys_vendor and
product_name DMI strings, without this patch brcmfmac will try to load:
brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit
too generic.

Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Predia Basic tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
index 4aa2561934d77..824a79f243830 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
@@ -40,6 +40,10 @@ static const struct brcmf_dmi_data pov_tab_p1006w_data = {
 	BRCM_CC_43340_CHIP_ID, 2, "pov-tab-p1006w-data"
 };
 
+static const struct brcmf_dmi_data predia_basic_data = {
+	BRCM_CC_43341_CHIP_ID, 2, "predia-basic"
+};
+
 static const struct dmi_system_id dmi_platform_data[] = {
 	{
 		/* ACEPC T8 Cherry Trail Z8350 mini PC */
@@ -111,6 +115,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		},
 		.driver_data = (void *)&pov_tab_p1006w_data,
 	},
+	{
+		/* Predia Basic tablet (+ with keyboard dock) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
+			/* Mx.WT107.KUBNGEA02 with the version-nr dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Mx.WT107.KUBNGEA"),
+		},
+		.driver_data = (void *)&predia_basic_data,
+	},
 	{}
 };
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 18/56] brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tablet
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (15 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 17/56] brcmfmac: Add DMI nvram filename quirk for Predia Basic tablet Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (37 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Kalle Valo, Sasha Levin, linux-wireless,
	brcm80211-dev-list.pdl, SHA-cyfmac-dev-list, netdev

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit a338c874d3d9d2463f031e89ae14942929b93db6 ]

The Voyo winpad A15 tablet contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt
as nvram file which is a bit too generic.

Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Voyo winpad A15 tablet.

While preparing a matching linux-firmware update I noticed that the nvram
is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI
quirk entry simply points to the already existing Prowise-PT301 nvram file.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/dmi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
index 824a79f243830..6d5188b78f2de 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
@@ -44,6 +44,14 @@ static const struct brcmf_dmi_data predia_basic_data = {
 	BRCM_CC_43341_CHIP_ID, 2, "predia-basic"
 };
 
+/* Note the Voyo winpad A15 tablet uses the same Ampak AP6330 module, with the
+ * exact same nvram file as the Prowise-PT301 tablet. Since the nvram for the
+ * Prowise-PT301 is already in linux-firmware we just point to that here.
+ */
+static const struct brcmf_dmi_data voyo_winpad_a15_data = {
+	BRCM_CC_4330_CHIP_ID, 4, "Prowise-PT301"
+};
+
 static const struct dmi_system_id dmi_platform_data[] = {
 	{
 		/* ACEPC T8 Cherry Trail Z8350 mini PC */
@@ -125,6 +133,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		},
 		.driver_data = (void *)&predia_basic_data,
 	},
+	{
+		/* Voyo winpad A15 tablet */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)&voyo_winpad_a15_data,
+	},
 	{}
 };
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 19/56] drm/hisilicon: Fix use-after-free
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Tian Tao, Thomas Zimmermann, Sasha Levin, dri-devel

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit c855af2f9c5c60760fd1bed7889a81bc37d2591d ]

Fix the problem of dev being released twice.
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : refcount_warn_saturate+0xd4/0x150
lr : refcount_warn_saturate+0xd4/0x150
sp : ffff2028150cbc00
x29: ffff2028150cbc00 x28: ffff2028150121c0
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000003
x23: 0000000000000000 x22: ffff2028150cbc90
x21: ffff2020038a30a8 x20: ffff2028150cbc90
x19: ffff0020cd938020 x18: 0000000000000010
x17: 0000000000000000 x16: 0000000000000000
x15: ffffffffffffffff x14: ffff2028950cb88f
x13: ffff2028150cb89d x12: 0000000000000000
x11: 0000000005f5e0ff x10: ffff2028150cb800
x9 : 00000000ffffffd0 x8 : 75203b776f6c6672
x7 : ffff800011a6f7c8 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff202ffe2f9dc0
x1 : ffffa02fecf40000 x0 : 0000000000000026
Call trace:
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
Call trace:
 dump_backtrace+0x0/0x208
 show_stack+0x2c/0x40
 dump_stack+0xd8/0x10c
 __warn+0xac/0x128
 report_bug+0xcc/0x180
 bug_handler+0x24/0x78
 call_break_hook+0x80/0xa0
 brk_handler+0x28/0x68
 do_debug_exception+0x9c/0x148
 el1_sync_handler+0x7c/0x128
 el1_sync+0x80/0x100
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
---[ end trace 00718630d6e5ff18 ]---

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index 085d1b2fa8c0a..d3485f742acc2 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -368,7 +368,6 @@ static void hibmc_pci_remove(struct pci_dev *pdev)
 
 	drm_dev_unregister(dev);
 	hibmc_unload(dev);
-	drm_dev_put(dev);
 }
 
 static struct pci_device_id hibmc_pci_table[] = {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 19/56] drm/hisilicon: Fix use-after-free
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Tian Tao, dri-devel, Thomas Zimmermann

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit c855af2f9c5c60760fd1bed7889a81bc37d2591d ]

Fix the problem of dev being released twice.
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : refcount_warn_saturate+0xd4/0x150
lr : refcount_warn_saturate+0xd4/0x150
sp : ffff2028150cbc00
x29: ffff2028150cbc00 x28: ffff2028150121c0
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000003
x23: 0000000000000000 x22: ffff2028150cbc90
x21: ffff2020038a30a8 x20: ffff2028150cbc90
x19: ffff0020cd938020 x18: 0000000000000010
x17: 0000000000000000 x16: 0000000000000000
x15: ffffffffffffffff x14: ffff2028950cb88f
x13: ffff2028150cb89d x12: 0000000000000000
x11: 0000000005f5e0ff x10: ffff2028150cb800
x9 : 00000000ffffffd0 x8 : 75203b776f6c6672
x7 : ffff800011a6f7c8 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff202ffe2f9dc0
x1 : ffffa02fecf40000 x0 : 0000000000000026
Call trace:
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
Call trace:
 dump_backtrace+0x0/0x208
 show_stack+0x2c/0x40
 dump_stack+0xd8/0x10c
 __warn+0xac/0x128
 report_bug+0xcc/0x180
 bug_handler+0x24/0x78
 call_break_hook+0x80/0xa0
 brk_handler+0x28/0x68
 do_debug_exception+0x9c/0x148
 el1_sync_handler+0x7c/0x128
 el1_sync+0x80/0x100
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
---[ end trace 00718630d6e5ff18 ]---

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index 085d1b2fa8c0a..d3485f742acc2 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -368,7 +368,6 @@ static void hibmc_pci_remove(struct pci_dev *pdev)
 
 	drm_dev_unregister(dev);
 	hibmc_unload(dev);
-	drm_dev_put(dev);
 }
 
 static struct pci_device_id hibmc_pci_table[] = {
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 20/56] udlfb: Fix memory leak in dlfb_usb_probe
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Zqiang, syzbot+c9e365d7f450e8aa615d, Daniel Vetter, Sasha Levin,
	linux-fbdev, dri-devel

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 5c0e4110f751934e748a66887c61f8e73805f0f9 ]

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/udlfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index f9b3c1cb9530f..b9cdd02c10009 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1017,6 +1017,7 @@ static void dlfb_ops_destroy(struct fb_info *info)
 	}
 	vfree(dlfb->backing_buffer);
 	kfree(dlfb->edid);
+	dlfb_free_urb_list(dlfb);
 	usb_put_dev(dlfb->udev);
 	kfree(dlfb);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 20/56] udlfb: Fix memory leak in dlfb_usb_probe
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-fbdev, syzbot+c9e365d7f450e8aa615d, dri-devel,
	Zqiang, Daniel Vetter

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 5c0e4110f751934e748a66887c61f8e73805f0f9 ]

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/udlfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index f9b3c1cb9530f..b9cdd02c10009 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1017,6 +1017,7 @@ static void dlfb_ops_destroy(struct fb_info *info)
 	}
 	vfree(dlfb->backing_buffer);
 	kfree(dlfb->edid);
+	dlfb_free_urb_list(dlfb);
 	usb_put_dev(dlfb->udev);
 	kfree(dlfb);
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 21/56] JFS: more checks for invalid superblock
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (18 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 22/56] crypto: tcrypt - avoid signed overflow in byte count Sasha Levin
                   ` (34 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Randy Dunlap, syzbot+36315852ece4132ec193, kernel test robot,
	Dave Kleikamp, jfs-discussion, Sasha Levin

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 3bef198f1b17d1bb89260bad947ef084c0a2d1a6 ]

syzbot is feeding invalid superblock data to JFS for mount testing.
JFS does not check several of the fields -- just assumes that they
are good since the JFS_MAGIC and version fields are good.

In this case (syzbot reproducer), we have s_l2bsize == 0xda0c,
pad == 0xf045, and s_state == 0x50, all of which are invalid IMO.
Having s_l2bsize == 0xda0c causes this UBSAN warning:
  UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25
  shift exponent -9716 is negative

s_l2bsize can be tested for correctness. pad can be tested for non-0
and punted. s_state can be tested for its valid values and punted.

Do those 3 tests and if any of them fails, report the superblock as
invalid/corrupt and let fsck handle it.

With this patch, chkSuper() says this when JFS_DEBUG is enabled:
  jfs_mount: Mount Failure: superblock is corrupt!
  Mount JFS Failure: -22
  jfs_mount failed w/return code = -22

The obvious problem with this method is that next week there could
be another syzbot test that uses different fields for invalid values,
this making this like a game of whack-a-mole.

syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193

Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com
Reported-by: kernel test robot <lkp@intel.com> # v2
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_filsys.h |  1 +
 fs/jfs/jfs_mount.c  | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/fs/jfs/jfs_filsys.h b/fs/jfs/jfs_filsys.h
index 1e899298f7f00..b5d702df7111a 100644
--- a/fs/jfs/jfs_filsys.h
+++ b/fs/jfs/jfs_filsys.h
@@ -268,5 +268,6 @@
 				 * fsck() must be run to repair
 				 */
 #define	FM_EXTENDFS 0x00000008	/* file system extendfs() in progress */
+#define	FM_STATE_MAX 0x0000000f	/* max value of s_state */
 
 #endif				/* _H_JFS_FILSYS */
diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c
index 2935d4c776ec7..5d7d7170c03c0 100644
--- a/fs/jfs/jfs_mount.c
+++ b/fs/jfs/jfs_mount.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
 #include <linux/blkdev.h>
+#include <linux/log2.h>
 
 #include "jfs_incore.h"
 #include "jfs_filsys.h"
@@ -366,6 +367,15 @@ static int chkSuper(struct super_block *sb)
 	sbi->bsize = bsize;
 	sbi->l2bsize = le16_to_cpu(j_sb->s_l2bsize);
 
+	/* check some fields for possible corruption */
+	if (sbi->l2bsize != ilog2((u32)bsize) ||
+	    j_sb->pad != 0 ||
+	    le32_to_cpu(j_sb->s_state) > FM_STATE_MAX) {
+		rc = -EINVAL;
+		jfs_err("jfs_mount: Mount Failure: superblock is corrupt!");
+		goto out;
+	}
+
 	/*
 	 * For now, ignore s_pbsize, l2bfactor.  All I/O going through buffer
 	 * cache.
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 22/56] crypto: tcrypt - avoid signed overflow in byte count
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (19 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 21/56] JFS: more checks for invalid superblock Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 23/56] fs: make unlazy_walk() error handling consistent Sasha Levin
                   ` (33 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ard Biesheuvel, Herbert Xu, Sasha Levin, linux-crypto

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 303fd3e1c771077e32e96e5788817f025f0067e2 ]

The signed long type used for printing the number of bytes processed in
tcrypt benchmarks limits the range to -/+ 2 GiB, which is not sufficient
to cover the performance of common accelerated ciphers such as AES-NI
when benchmarked with sec=1. So switch to u64 instead.

While at it, fix up a missing printk->pr_cont conversion in the AEAD
benchmark.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/tcrypt.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index eea0f453cfb6e..8609174e036e8 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -199,8 +199,8 @@ static int test_mb_aead_jiffies(struct test_mb_aead_data *data, int enc,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -469,8 +469,8 @@ static int test_aead_jiffies(struct aead_request *req, int enc,
 			return ret;
 	}
 
-	printk("%d operations in %d seconds (%ld bytes)\n",
-	       bcount, secs, (long)bcount * blen);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+	        bcount, secs, (u64)bcount * blen);
 	return 0;
 }
 
@@ -760,8 +760,8 @@ static int test_mb_ahash_jiffies(struct test_mb_ahash_data *data, int blen,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -1197,8 +1197,8 @@ static int test_mb_acipher_jiffies(struct test_mb_skcipher_data *data, int enc,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -1435,8 +1435,8 @@ static int test_acipher_jiffies(struct skcipher_request *req, int enc,
 			return ret;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount, secs, (long)bcount * blen);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount, secs, (u64)bcount * blen);
 	return 0;
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 23/56] fs: make unlazy_walk() error handling consistent
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (20 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 22/56] crypto: tcrypt - avoid signed overflow in byte count Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-03-05 12:40   ` Pavel Machek
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 24/56] sched/core: Allow try_invoke_on_locked_down_task() with irqs disabled Sasha Levin
                   ` (32 subsequent siblings)
  54 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jens Axboe, Al Viro, Sasha Levin, linux-fsdevel

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit e36cffed20a324e116f329a94061ae30dd26fb51 ]

Most callers check for non-zero return, and assume it's -ECHILD (which
it always will be). One caller uses the actual error return. Clean this
up and make it fully consistent, by having unlazy_walk() return a bool
instead. Rename it to try_to_unlazy() and return true on success, and
failure on error. That's easier to read.

No functional changes in this patch.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/namei.c | 43 +++++++++++++++++--------------------------
 1 file changed, 17 insertions(+), 26 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index d4a6dd7723038..7af66d5a0c1bf 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -669,17 +669,17 @@ static bool legitimize_root(struct nameidata *nd)
  */
 
 /**
- * unlazy_walk - try to switch to ref-walk mode.
+ * try_to_unlazy - try to switch to ref-walk mode.
  * @nd: nameidata pathwalk data
- * Returns: 0 on success, -ECHILD on failure
+ * Returns: true on success, false on failure
  *
- * unlazy_walk attempts to legitimize the current nd->path and nd->root
+ * try_to_unlazy attempts to legitimize the current nd->path and nd->root
  * for ref-walk mode.
  * Must be called from rcu-walk context.
- * Nothing should touch nameidata between unlazy_walk() failure and
+ * Nothing should touch nameidata between try_to_unlazy() failure and
  * terminate_walk().
  */
-static int unlazy_walk(struct nameidata *nd)
+static bool try_to_unlazy(struct nameidata *nd)
 {
 	struct dentry *parent = nd->path.dentry;
 
@@ -694,14 +694,14 @@ static int unlazy_walk(struct nameidata *nd)
 		goto out;
 	rcu_read_unlock();
 	BUG_ON(nd->inode != parent->d_inode);
-	return 0;
+	return true;
 
 out1:
 	nd->path.mnt = NULL;
 	nd->path.dentry = NULL;
 out:
 	rcu_read_unlock();
-	return -ECHILD;
+	return false;
 }
 
 /**
@@ -792,7 +792,7 @@ static int complete_walk(struct nameidata *nd)
 		 */
 		if (!(nd->flags & (LOOKUP_ROOT | LOOKUP_IS_SCOPED)))
 			nd->root.mnt = NULL;
-		if (unlikely(unlazy_walk(nd)))
+		if (!try_to_unlazy(nd))
 			return -ECHILD;
 	}
 
@@ -1466,7 +1466,7 @@ static struct dentry *lookup_fast(struct nameidata *nd,
 		unsigned seq;
 		dentry = __d_lookup_rcu(parent, &nd->last, &seq);
 		if (unlikely(!dentry)) {
-			if (unlazy_walk(nd))
+			if (!try_to_unlazy(nd))
 				return ERR_PTR(-ECHILD);
 			return NULL;
 		}
@@ -1567,10 +1567,8 @@ static inline int may_lookup(struct nameidata *nd)
 {
 	if (nd->flags & LOOKUP_RCU) {
 		int err = inode_permission(nd->inode, MAY_EXEC|MAY_NOT_BLOCK);
-		if (err != -ECHILD)
+		if (err != -ECHILD || !try_to_unlazy(nd))
 			return err;
-		if (unlazy_walk(nd))
-			return -ECHILD;
 	}
 	return inode_permission(nd->inode, MAY_EXEC);
 }
@@ -1592,7 +1590,7 @@ static int reserve_stack(struct nameidata *nd, struct path *link, unsigned seq)
 		// unlazy even if we fail to grab the link - cleanup needs it
 		bool grabbed_link = legitimize_path(nd, link, seq);
 
-		if (unlazy_walk(nd) != 0 || !grabbed_link)
+		if (!try_to_unlazy(nd) != 0 || !grabbed_link)
 			return -ECHILD;
 
 		if (nd_alloc_stack(nd))
@@ -1634,7 +1632,7 @@ static const char *pick_link(struct nameidata *nd, struct path *link,
 		touch_atime(&last->link);
 		cond_resched();
 	} else if (atime_needs_update(&last->link, inode)) {
-		if (unlikely(unlazy_walk(nd)))
+		if (!try_to_unlazy(nd))
 			return ERR_PTR(-ECHILD);
 		touch_atime(&last->link);
 	}
@@ -1651,11 +1649,8 @@ static const char *pick_link(struct nameidata *nd, struct path *link,
 		get = inode->i_op->get_link;
 		if (nd->flags & LOOKUP_RCU) {
 			res = get(NULL, inode, &last->done);
-			if (res == ERR_PTR(-ECHILD)) {
-				if (unlikely(unlazy_walk(nd)))
-					return ERR_PTR(-ECHILD);
+			if (res == ERR_PTR(-ECHILD) && try_to_unlazy(nd))
 				res = get(link->dentry, inode, &last->done);
-			}
 		} else {
 			res = get(link->dentry, inode, &last->done);
 		}
@@ -2193,7 +2188,7 @@ static int link_path_walk(const char *name, struct nameidata *nd)
 		}
 		if (unlikely(!d_can_lookup(nd->path.dentry))) {
 			if (nd->flags & LOOKUP_RCU) {
-				if (unlazy_walk(nd))
+				if (!try_to_unlazy(nd))
 					return -ECHILD;
 			}
 			return -ENOTDIR;
@@ -3127,7 +3122,6 @@ static const char *open_last_lookups(struct nameidata *nd,
 	struct inode *inode;
 	struct dentry *dentry;
 	const char *res;
-	int error;
 
 	nd->flags |= op->intent;
 
@@ -3151,9 +3145,8 @@ static const char *open_last_lookups(struct nameidata *nd,
 	} else {
 		/* create side of things */
 		if (nd->flags & LOOKUP_RCU) {
-			error = unlazy_walk(nd);
-			if (unlikely(error))
-				return ERR_PTR(error);
+			if (!try_to_unlazy(nd))
+				return ERR_PTR(-ECHILD);
 		}
 		audit_inode(nd->name, dir, AUDIT_INODE_PARENT);
 		/* trailing slashes? */
@@ -3162,9 +3155,7 @@ static const char *open_last_lookups(struct nameidata *nd,
 	}
 
 	if (open_flag & (O_CREAT | O_TRUNC | O_WRONLY | O_RDWR)) {
-		error = mnt_want_write(nd->path.mnt);
-		if (!error)
-			got_write = true;
+		got_write = !mnt_want_write(nd->path.mnt);
 		/*
 		 * do _not_ fail yet - we might not need that or fail with
 		 * a different error; let lookup_open() decide; we'll be
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 24/56] sched/core: Allow try_invoke_on_locked_down_task() with irqs disabled
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (21 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 23/56] fs: make unlazy_walk() error handling consistent Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (31 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Peter Zijlstra, syzbot+cb3b69ae80afd6535b0e, Paul E . McKenney,
	Sasha Levin

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 1b7af295541d75535374325fd617944534853919 ]

The try_invoke_on_locked_down_task() function currently requires
that interrupts be enabled, but it is called with interrupts
disabled from rcu_print_task_stall(), resulting in an "IRQs not
enabled as expected" diagnostic.  This commit therefore updates
try_invoke_on_locked_down_task() to use raw_spin_lock_irqsave() instead
of raw_spin_lock_irq(), thus allowing use from either context.

Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/
Link: https://lore.kernel.org/lkml/20200928075729.GC2611@hirez.programming.kicks-ass.net/
Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 77aa0e788b9b7..269165bf440af 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2989,7 +2989,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
 
 /**
  * try_invoke_on_locked_down_task - Invoke a function on task in fixed state
- * @p: Process for which the function is to be invoked.
+ * @p: Process for which the function is to be invoked, can be @current.
  * @func: Function to invoke.
  * @arg: Argument to function.
  *
@@ -3007,12 +3007,11 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
  */
 bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct task_struct *t, void *arg), void *arg)
 {
-	bool ret = false;
 	struct rq_flags rf;
+	bool ret = false;
 	struct rq *rq;
 
-	lockdep_assert_irqs_enabled();
-	raw_spin_lock_irq(&p->pi_lock);
+	raw_spin_lock_irqsave(&p->pi_lock, rf.flags);
 	if (p->on_rq) {
 		rq = __task_rq_lock(p, &rf);
 		if (task_rq(p) == rq)
@@ -3029,7 +3028,7 @@ bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct t
 				ret = func(p, arg);
 		}
 	}
-	raw_spin_unlock_irq(&p->pi_lock);
+	raw_spin_unlock_irqrestore(&p->pi_lock, rf.flags);
 	return ret;
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 25/56] drm/amdgpu: Add check to prevent IH overflow
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                     ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Defang Bo, Christian König, Alex Deucher, Sasha Levin,
	amd-gfx, dri-devel

From: Defang Bo <bodefang@126.com>

[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cz_ih.c      | 37 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/tonga_ih.c   | 37 ++++++++++++++++---------
 3 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
index 1dca0cabc326a..13520d173296f 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
@@ -193,19 +193,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
index a13dd9a51149a..7d165f024f072 100644
--- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
@@ -193,19 +193,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
index e40140bf6699c..db0a3bda13fbe 100644
--- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
@@ -195,19 +195,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 25/56] drm/amdgpu: Add check to prevent IH overflow
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Defang Bo, amd-gfx, Alex Deucher,
	Christian König

From: Defang Bo <bodefang@126.com>

[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cz_ih.c      | 37 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/tonga_ih.c   | 37 ++++++++++++++++---------
 3 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
index 1dca0cabc326a..13520d173296f 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
@@ -193,19 +193,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
index a13dd9a51149a..7d165f024f072 100644
--- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
@@ -193,19 +193,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
index e40140bf6699c..db0a3bda13fbe 100644
--- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
@@ -195,19 +195,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 25/56] drm/amdgpu: Add check to prevent IH overflow
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Defang Bo, amd-gfx, Alex Deucher,
	Christian König

From: Defang Bo <bodefang@126.com>

[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ]

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cz_ih.c      | 37 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/iceland_ih.c | 36 +++++++++++++++---------
 drivers/gpu/drm/amd/amdgpu/tonga_ih.c   | 37 ++++++++++++++++---------
 3 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cz_ih.c b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
index 1dca0cabc326a..13520d173296f 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_ih.c
@@ -193,19 +193,30 @@ static u32 cz_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
index a13dd9a51149a..7d165f024f072 100644
--- a/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/iceland_ih.c
@@ -193,19 +193,29 @@ static u32 iceland_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
index e40140bf6699c..db0a3bda13fbe 100644
--- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c
@@ -195,19 +195,30 @@ static u32 tonga_ih_get_wptr(struct amdgpu_device *adev,
 
 	wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW)) {
-		wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
-		/* When a ring buffer overflow happen start parsing interrupt
-		 * from the last not overwritten vector (wptr + 16). Hopefully
-		 * this should allow us to catchup.
-		 */
-		dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
-			 wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
-		ih->rptr = (wptr + 16) & ih->ptr_mask;
-		tmp = RREG32(mmIH_RB_CNTL);
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
-		WREG32(mmIH_RB_CNTL, tmp);
-	}
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	/* Double check that the overflow wasn't already cleared. */
+	wptr = RREG32(mmIH_RB_WPTR);
+
+	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+		goto out;
+
+	wptr = REG_SET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW, 0);
+
+	/* When a ring buffer overflow happen start parsing interrupt
+	 * from the last not overwritten vector (wptr + 16). Hopefully
+	 * this should allow us to catchup.
+	 */
+
+	dev_warn(adev->dev, "IH ring buffer overflow (0x%08X, 0x%08X, 0x%08X)\n",
+		wptr, ih->rptr, (wptr + 16) & ih->ptr_mask);
+	ih->rptr = (wptr + 16) & ih->ptr_mask;
+	tmp = RREG32(mmIH_RB_CNTL);
+	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+	WREG32(mmIH_RB_CNTL, tmp);
+
+out:
 	return (wptr & ih->ptr_mask);
 }
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 26/56] PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (23 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (29 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nirmoy Das, Christian König, Bjorn Helgaas, Sasha Levin, linux-pci

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 907830b0fc9e374d00f3c83de5e426157b482c01 ]

RX 5600 XT Pulse advertises support for BAR 0 being 256MB, 512MB,
or 1GB, but it also supports 2GB, 4GB, and 8GB. Add a rebar
size quirk so that the BAR 0 is big enough to cover complete VARM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-5-nirmoy.das@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6427cbd0a5be2..5c93450725108 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3577,7 +3577,14 @@ u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar)
 		return 0;
 
 	pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
-	return (cap & PCI_REBAR_CAP_SIZES) >> 4;
+	cap &= PCI_REBAR_CAP_SIZES;
+
+	/* Sapphire RX 5600 XT Pulse has an invalid cap dword for BAR 0 */
+	if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x731f &&
+	    bar == 0 && cap == 0x7000)
+		cap = 0x3f000;
+
+	return cap >> 4;
 }
 
 /**
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 27/56] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Rasmus Porsager, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1851ccf9e155b2a6f6cca1a7bd49325f5efbd5d2 ]

Some devices, like mini PCs/media/top-set boxes do not have any speakers
at all, an example of the is the Mele PCG03 Mini PC.

Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add
speaker routes and modifies the components and the (optional) long_name
strings to reflect that there are no speakers.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index f790514a147dd..db3633de9122f 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -71,6 +71,7 @@ enum {
 #define BYT_RT5640_SSP0_AIF2		BIT(21)
 #define BYT_RT5640_MCLK_EN		BIT(22)
 #define BYT_RT5640_MCLK_25MHZ		BIT(23)
+#define BYT_RT5640_NO_SPEAKERS		BIT(24)
 
 #define BYTCR_INPUT_DEFAULTS				\
 	(BYT_RT5640_IN3_MAP |				\
@@ -132,6 +133,8 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk JD_NOT_INV enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
 		dev_info(dev, "quirk MONO_SPEAKER enabled\n");
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
+		dev_info(dev, "quirk NO_SPEAKERS enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
 		dev_info(dev, "quirk DIFF_MIC enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
@@ -934,7 +937,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_mono_spk_map,
 					ARRAY_SIZE(byt_rt5640_mono_spk_map));
-	} else {
+	} else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) {
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_stereo_spk_map,
 					ARRAY_SIZE(byt_rt5640_stereo_spk_map));
@@ -1179,6 +1182,7 @@ struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
 static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 {
 	static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" };
+	__maybe_unused const char *spk_type;
 	const struct dmi_system_id *dmi_id;
 	struct byt_rt5640_private *priv;
 	struct snd_soc_acpi_mach *mach;
@@ -1186,7 +1190,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	struct acpi_device *adev;
 	int ret_val = 0;
 	int dai_index = 0;
-	int i;
+	int i, cfg_spk;
 
 	is_bytcr = false;
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -1325,16 +1329,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
+		cfg_spk = 0;
+		spk_type = "none";
+	} else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
+		cfg_spk = 1;
+		spk_type = "mono";
+	} else {
+		cfg_spk = 2;
+		spk_type = "stereo";
+	}
+
 	snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
-		 "cfg-spk:%s cfg-mic:%s",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2",
+		 "cfg-spk:%d cfg-mic:%s", cfg_spk,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.components = byt_rt5640_components;
 #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
 	snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
-		 "bytcr-rt5640-%s-spk-%s-mic",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ?
-			"mono" : "stereo",
+		 "bytcr-rt5640-%s-spk-%s-mic", spk_type,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.long_name = byt_rt5640_long_name;
 #endif
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 27/56] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Rasmus Porsager, Pierre-Louis Bossart,
	Hans de Goede, Mark Brown

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1851ccf9e155b2a6f6cca1a7bd49325f5efbd5d2 ]

Some devices, like mini PCs/media/top-set boxes do not have any speakers
at all, an example of the is the Mele PCG03 Mini PC.

Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add
speaker routes and modifies the components and the (optional) long_name
strings to reflect that there are no speakers.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index f790514a147dd..db3633de9122f 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -71,6 +71,7 @@ enum {
 #define BYT_RT5640_SSP0_AIF2		BIT(21)
 #define BYT_RT5640_MCLK_EN		BIT(22)
 #define BYT_RT5640_MCLK_25MHZ		BIT(23)
+#define BYT_RT5640_NO_SPEAKERS		BIT(24)
 
 #define BYTCR_INPUT_DEFAULTS				\
 	(BYT_RT5640_IN3_MAP |				\
@@ -132,6 +133,8 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk JD_NOT_INV enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
 		dev_info(dev, "quirk MONO_SPEAKER enabled\n");
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
+		dev_info(dev, "quirk NO_SPEAKERS enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
 		dev_info(dev, "quirk DIFF_MIC enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
@@ -934,7 +937,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_mono_spk_map,
 					ARRAY_SIZE(byt_rt5640_mono_spk_map));
-	} else {
+	} else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) {
 		ret = snd_soc_dapm_add_routes(&card->dapm,
 					byt_rt5640_stereo_spk_map,
 					ARRAY_SIZE(byt_rt5640_stereo_spk_map));
@@ -1179,6 +1182,7 @@ struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
 static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 {
 	static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" };
+	__maybe_unused const char *spk_type;
 	const struct dmi_system_id *dmi_id;
 	struct byt_rt5640_private *priv;
 	struct snd_soc_acpi_mach *mach;
@@ -1186,7 +1190,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	struct acpi_device *adev;
 	int ret_val = 0;
 	int dai_index = 0;
-	int i;
+	int i, cfg_spk;
 
 	is_bytcr = false;
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -1325,16 +1329,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
+		cfg_spk = 0;
+		spk_type = "none";
+	} else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
+		cfg_spk = 1;
+		spk_type = "mono";
+	} else {
+		cfg_spk = 2;
+		spk_type = "stereo";
+	}
+
 	snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
-		 "cfg-spk:%s cfg-mic:%s",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2",
+		 "cfg-spk:%d cfg-mic:%s", cfg_spk,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.components = byt_rt5640_components;
 #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
 	snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
-		 "bytcr-rt5640-%s-spk-%s-mic",
-		 (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ?
-			"mono" : "stereo",
+		 "bytcr-rt5640-%s-spk-%s-mic", spk_type,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
 	byt_rt5640_card.long_name = byt_rt5640_long_name;
 #endif
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 28/56] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                     ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nicholas Kazlauskas, Daniel Wheeler, Eric Yang, Anson Jacob,
	Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index e1e5d81a5e438..21c7b642a8b4e 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1454,6 +1454,11 @@ static bool dc_link_construct(struct dc_link *link,
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 28/56] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Eric Yang, Anson Jacob, amd-gfx, Daniel Wheeler,
	dri-devel, Alex Deucher, Nicholas Kazlauskas

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index e1e5d81a5e438..21c7b642a8b4e 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1454,6 +1454,11 @@ static bool dc_link_construct(struct dc_link *link,
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 28/56] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Eric Yang, Anson Jacob, amd-gfx, Daniel Wheeler,
	dri-devel, Alex Deucher, Nicholas Kazlauskas

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index e1e5d81a5e438..21c7b642a8b4e 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1454,6 +1454,11 @@ static bool dc_link_construct(struct dc_link *link,
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 29/56] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                     ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jingwen Chen, Monk Liu, Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Jingwen Chen <Jingwen.Chen2@amd.com>

[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]

[Why]
when vram lost happened in guest, try to write vram can lead to
kernel stuck.

[How]
When the readback data is invalid, don't do write work, directly
reschedule a new work.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index d0aea5e395315..e7678ba8fdcf8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -558,10 +558,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev)
 void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work)
 {
 	struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work);
+	int ret;
 
-	amdgpu_virt_read_pf2vf_data(adev);
+	ret = amdgpu_virt_read_pf2vf_data(adev);
+	if (ret)
+		goto out;
 	amdgpu_virt_write_vf2pf_data(adev);
 
+out:
 	schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms);
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 29/56] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jingwen Chen, dri-devel, amd-gfx, Alex Deucher, Monk Liu

From: Jingwen Chen <Jingwen.Chen2@amd.com>

[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]

[Why]
when vram lost happened in guest, try to write vram can lead to
kernel stuck.

[How]
When the readback data is invalid, don't do write work, directly
reschedule a new work.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index d0aea5e395315..e7678ba8fdcf8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -558,10 +558,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev)
 void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work)
 {
 	struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work);
+	int ret;
 
-	amdgpu_virt_read_pf2vf_data(adev);
+	ret = amdgpu_virt_read_pf2vf_data(adev);
+	if (ret)
+		goto out;
 	amdgpu_virt_write_vf2pf_data(adev);
 
+out:
 	schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms);
 }
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 29/56] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jingwen Chen, dri-devel, amd-gfx, Alex Deucher, Monk Liu

From: Jingwen Chen <Jingwen.Chen2@amd.com>

[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ]

[Why]
when vram lost happened in guest, try to write vram can lead to
kernel stuck.

[How]
When the readback data is invalid, don't do write work, directly
reschedule a new work.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index d0aea5e395315..e7678ba8fdcf8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -558,10 +558,14 @@ static int amdgpu_virt_write_vf2pf_data(struct amdgpu_device *adev)
 void amdgpu_virt_update_vf2pf_work_item(struct work_struct *work)
 {
 	struct amdgpu_device *adev = container_of(work, struct amdgpu_device, virt.vf2pf_work.work);
+	int ret;
 
-	amdgpu_virt_read_pf2vf_data(adev);
+	ret = amdgpu_virt_read_pf2vf_data(adev);
+	if (ret)
+		goto out;
 	amdgpu_virt_write_vf2pf_data(adev);
 
+out:
 	schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms);
 }
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 30/56] media: mceusb: sanity check for prescaler value
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (27 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 31/56] media: v4l2-ctrls.c: fix shift-out-of-bounds in std_validate Sasha Levin
                   ` (25 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sean Young, syzbot+6d31bf169a8265204b8d, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Sean Young <sean@mess.org>

[ Upstream commit 9dec0f48a75e0dadca498002d25ef4e143e60194 ]

prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.

Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/mceusb.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index f1dbd059ed087..43d356251d051 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -701,11 +701,18 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
 				data[0], data[1]);
 			break;
 		case MCE_RSP_EQIRCFS:
+			if (!data[0] && !data[1]) {
+				dev_dbg(dev, "%s: no carrier", inout);
+				break;
+			}
+			// prescaler should make sense
+			if (data[0] > 8)
+				break;
 			period = DIV_ROUND_CLOSEST((1U << data[0] * 2) *
 						   (data[1] + 1), 10);
 			if (!period)
 				break;
-			carrier = (1000 * 1000) / period;
+			carrier = USEC_PER_SEC / period;
 			dev_dbg(dev, "%s carrier of %u Hz (period %uus)",
 				 inout, carrier, period);
 			break;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 31/56] media: v4l2-ctrls.c: fix shift-out-of-bounds in std_validate
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (28 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 30/56] media: mceusb: sanity check for prescaler value Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 32/56] media: uvcvideo: Allow entities with no pads Sasha Levin
                   ` (24 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans Verkuil, syzbot+42d8c7c3d3e594b34346, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 048c96e28674f15c0403deba2104ffba64544a06 ]

If a menu has more than 64 items, then don't check menu_skip_mask
for items 65 and up.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-ctrls.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index bd7f330c941c4..cfe422d9f439b 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -1987,7 +1987,8 @@ static int std_validate(const struct v4l2_ctrl *ctrl, u32 idx,
 	case V4L2_CTRL_TYPE_INTEGER_MENU:
 		if (ptr.p_s32[idx] < ctrl->minimum || ptr.p_s32[idx] > ctrl->maximum)
 			return -ERANGE;
-		if (ctrl->menu_skip_mask & (1ULL << ptr.p_s32[idx]))
+		if (ptr.p_s32[idx] < BITS_PER_LONG_LONG &&
+		    (ctrl->menu_skip_mask & BIT_ULL(ptr.p_s32[idx])))
 			return -EINVAL;
 		if (ctrl->type == V4L2_CTRL_TYPE_MENU &&
 		    ctrl->qmenu[ptr.p_s32[idx]][0] == '\0')
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 32/56] media: uvcvideo: Allow entities with no pads
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (29 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 31/56] media: v4l2-ctrls.c: fix shift-out-of-bounds in std_validate Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` [f2fs-dev] " Sasha Levin
                   ` (23 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ricardo Ribalda, Laurent Pinchart, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Ricardo Ribalda <ribalda@chromium.org>

[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ]

Avoid an underflow while calculating the number of inputs for entities
with zero pads.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_driver.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index ddb9eaa11be71..5ad5282641350 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1028,7 +1028,10 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 	unsigned int i;
 
 	extra_size = roundup(extra_size, sizeof(*entity->pads));
-	num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1;
+	if (num_pads)
+		num_inputs = type & UVC_TERM_OUTPUT ? num_pads : num_pads - 1;
+	else
+		num_inputs = 0;
 	size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads
 	     + num_inputs;
 	entity = kzalloc(size, GFP_KERNEL);
@@ -1044,7 +1047,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 
 	for (i = 0; i < num_inputs; ++i)
 		entity->pads[i].flags = MEDIA_PAD_FL_SINK;
-	if (!UVC_ENTITY_IS_OTERM(entity))
+	if (!UVC_ENTITY_IS_OTERM(entity) && num_pads)
 		entity->pads[num_pads-1].flags = MEDIA_PAD_FL_SOURCE;
 
 	entity->bNrInPins = num_inputs;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 33/56] f2fs: handle unallocated section and zone on pinned/atgc
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jaegeuk Kim, Chao Yu, Sasha Levin, linux-f2fs-devel

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 632faca72938f9f63049e48a8c438913828ac7a9 ]

If we have large section/zone, unallocated segment makes them corrupted.

E.g.,

  - Pinned file:       -1 119304647 119304647
  - ATGC   data:       -1 119304647 119304647

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index e81eb0748e2a9..229814b4f4a6c 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -101,11 +101,11 @@ static inline void sanity_check_seg_type(struct f2fs_sb_info *sbi,
 #define BLKS_PER_SEC(sbi)					\
 	((sbi)->segs_per_sec * (sbi)->blocks_per_seg)
 #define GET_SEC_FROM_SEG(sbi, segno)				\
-	((segno) / (sbi)->segs_per_sec)
+	(((segno) == -1) ? -1: (segno) / (sbi)->segs_per_sec)
 #define GET_SEG_FROM_SEC(sbi, secno)				\
 	((secno) * (sbi)->segs_per_sec)
 #define GET_ZONE_FROM_SEC(sbi, secno)				\
-	((secno) / (sbi)->secs_per_zone)
+	(((secno) == -1) ? -1: (secno) / (sbi)->secs_per_zone)
 #define GET_ZONE_FROM_SEG(sbi, segno)				\
 	GET_ZONE_FROM_SEC(sbi, GET_SEC_FROM_SEG(sbi, segno))
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [f2fs-dev] [PATCH AUTOSEL 5.10 33/56] f2fs: handle unallocated section and zone on pinned/atgc
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Jaegeuk Kim, linux-f2fs-devel

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 632faca72938f9f63049e48a8c438913828ac7a9 ]

If we have large section/zone, unallocated segment makes them corrupted.

E.g.,

  - Pinned file:       -1 119304647 119304647
  - ATGC   data:       -1 119304647 119304647

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index e81eb0748e2a9..229814b4f4a6c 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -101,11 +101,11 @@ static inline void sanity_check_seg_type(struct f2fs_sb_info *sbi,
 #define BLKS_PER_SEC(sbi)					\
 	((sbi)->segs_per_sec * (sbi)->blocks_per_seg)
 #define GET_SEC_FROM_SEG(sbi, segno)				\
-	((segno) / (sbi)->segs_per_sec)
+	(((segno) == -1) ? -1: (segno) / (sbi)->segs_per_sec)
 #define GET_SEG_FROM_SEC(sbi, secno)				\
 	((secno) * (sbi)->segs_per_sec)
 #define GET_ZONE_FROM_SEC(sbi, secno)				\
-	((secno) / (sbi)->secs_per_zone)
+	(((secno) == -1) ? -1: (secno) / (sbi)->secs_per_zone)
 #define GET_ZONE_FROM_SEG(sbi, segno)				\
 	GET_ZONE_FROM_SEC(sbi, GET_SEC_FROM_SEG(sbi, segno))
 
-- 
2.27.0



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 34/56] f2fs: fix to set/clear I_LINKABLE under i_lock
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Chao Yu, Jaegeuk Kim, Sasha Levin, linux-f2fs-devel

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 46085f37fc9e12d5c3539fb768b5ad7951e72acf ]

fsstress + fault injection test case reports a warning message as
below:

WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40
Call Trace:
 f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs]
 f2fs_add_inline_entry+0x153/0x3b0 [f2fs]
 f2fs_add_dentry+0x75/0x80 [f2fs]
 f2fs_do_add_link+0x108/0x160 [f2fs]
 f2fs_rename2+0x6ab/0x14f0 [f2fs]
 vfs_rename+0x70c/0x940
 do_renameat2+0x4d8/0x4f0
 __x64_sys_renameat2+0x4b/0x60
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Following race case can cause this:
Thread A				Kworker
- f2fs_rename
 - f2fs_create_whiteout
  - __f2fs_tmpfile
   - f2fs_i_links_write
    - f2fs_mark_inode_dirty_sync
     - mark_inode_dirty_sync
					- writeback_single_inode
					 - __writeback_single_inode
					  - spin_lock(&inode->i_lock)
   - inode->i_state |= I_LINKABLE
					  - inode->i_state &= ~dirty
					  - spin_unlock(&inode->i_lock)
 - f2fs_add_link
  - f2fs_do_add_link
   - f2fs_add_dentry
    - f2fs_add_inline_entry
     - f2fs_init_inode_metadata
      - f2fs_i_links_write
       - inc_nlink
        - WARN_ON(!(inode->i_state & I_LINKABLE))

Fix to add i_lock to avoid i_state update race condition.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/namei.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 8fa37d1434de1..5f7ab4f113224 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -854,7 +854,11 @@ static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
 
 	if (whiteout) {
 		f2fs_i_links_write(inode, false);
+
+		spin_lock(&inode->i_lock);
 		inode->i_state |= I_LINKABLE;
+		spin_unlock(&inode->i_lock);
+
 		*whiteout = inode;
 	} else {
 		d_tmpfile(dentry, inode);
@@ -1040,7 +1044,11 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		err = f2fs_add_link(old_dentry, whiteout);
 		if (err)
 			goto put_out_dir;
+
+		spin_lock(&whiteout->i_lock);
 		whiteout->i_state &= ~I_LINKABLE;
+		spin_unlock(&whiteout->i_lock);
+
 		iput(whiteout);
 	}
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [f2fs-dev] [PATCH AUTOSEL 5.10 34/56] f2fs: fix to set/clear I_LINKABLE under i_lock
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Jaegeuk Kim, linux-f2fs-devel

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 46085f37fc9e12d5c3539fb768b5ad7951e72acf ]

fsstress + fault injection test case reports a warning message as
below:

WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40
Call Trace:
 f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs]
 f2fs_add_inline_entry+0x153/0x3b0 [f2fs]
 f2fs_add_dentry+0x75/0x80 [f2fs]
 f2fs_do_add_link+0x108/0x160 [f2fs]
 f2fs_rename2+0x6ab/0x14f0 [f2fs]
 vfs_rename+0x70c/0x940
 do_renameat2+0x4d8/0x4f0
 __x64_sys_renameat2+0x4b/0x60
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Following race case can cause this:
Thread A				Kworker
- f2fs_rename
 - f2fs_create_whiteout
  - __f2fs_tmpfile
   - f2fs_i_links_write
    - f2fs_mark_inode_dirty_sync
     - mark_inode_dirty_sync
					- writeback_single_inode
					 - __writeback_single_inode
					  - spin_lock(&inode->i_lock)
   - inode->i_state |= I_LINKABLE
					  - inode->i_state &= ~dirty
					  - spin_unlock(&inode->i_lock)
 - f2fs_add_link
  - f2fs_do_add_link
   - f2fs_add_dentry
    - f2fs_add_inline_entry
     - f2fs_init_inode_metadata
      - f2fs_i_links_write
       - inc_nlink
        - WARN_ON(!(inode->i_state & I_LINKABLE))

Fix to add i_lock to avoid i_state update race condition.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/namei.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 8fa37d1434de1..5f7ab4f113224 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -854,7 +854,11 @@ static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
 
 	if (whiteout) {
 		f2fs_i_links_write(inode, false);
+
+		spin_lock(&inode->i_lock);
 		inode->i_state |= I_LINKABLE;
+		spin_unlock(&inode->i_lock);
+
 		*whiteout = inode;
 	} else {
 		d_tmpfile(dentry, inode);
@@ -1040,7 +1044,11 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		err = f2fs_add_link(old_dentry, whiteout);
 		if (err)
 			goto put_out_dir;
+
+		spin_lock(&whiteout->i_lock);
 		whiteout->i_state &= ~I_LINKABLE;
+		spin_unlock(&whiteout->i_lock);
+
 		iput(whiteout);
 	}
 
-- 
2.27.0



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 35/56] tomoyo: ignore data race while checking quota
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (32 preceding siblings ...)
  2021-02-24 12:51   ` [f2fs-dev] " Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
                   ` (20 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tetsuo Handa, syzbot, Sasha Levin, linux-security-module

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 5797e861e402fff2bedce4ec8b7c89f4248b6073 ]

syzbot is reporting that tomoyo's quota check is racy [1]. But this check
is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore
this data race.

[1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e50476

Reported-by: syzbot <syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/tomoyo/file.c    | 16 ++++++++--------
 security/tomoyo/network.c |  8 ++++----
 security/tomoyo/util.c    | 24 ++++++++++++------------
 3 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 051f7297877cb..1e6077568fdec 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -362,14 +362,14 @@ static bool tomoyo_merge_path_acl(struct tomoyo_acl_info *a,
 {
 	u16 * const a_perm = &container_of(a, struct tomoyo_path_acl, head)
 		->perm;
-	u16 perm = *a_perm;
+	u16 perm = READ_ONCE(*a_perm);
 	const u16 b_perm = container_of(b, struct tomoyo_path_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -437,7 +437,7 @@ static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a,
 {
 	u8 *const a_perm = &container_of(a, struct tomoyo_mkdev_acl,
 					 head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_mkdev_acl, head)
 		->perm;
 
@@ -445,7 +445,7 @@ static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a,
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -517,14 +517,14 @@ static bool tomoyo_merge_path2_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm = &container_of(a, struct tomoyo_path2_acl, head)
 		->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_path2_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -655,7 +655,7 @@ static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm = &container_of(a, struct tomoyo_path_number_acl,
 					  head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_path_number_acl, head)
 		->perm;
 
@@ -663,7 +663,7 @@ static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a,
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
diff --git a/security/tomoyo/network.c b/security/tomoyo/network.c
index f9ff121d7e1eb..a89ed55d85d41 100644
--- a/security/tomoyo/network.c
+++ b/security/tomoyo/network.c
@@ -233,14 +233,14 @@ static bool tomoyo_merge_inet_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm =
 		&container_of(a, struct tomoyo_inet_acl, head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_inet_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
@@ -259,14 +259,14 @@ static bool tomoyo_merge_unix_acl(struct tomoyo_acl_info *a,
 {
 	u8 * const a_perm =
 		&container_of(a, struct tomoyo_unix_acl, head)->perm;
-	u8 perm = *a_perm;
+	u8 perm = READ_ONCE(*a_perm);
 	const u8 b_perm = container_of(b, struct tomoyo_unix_acl, head)->perm;
 
 	if (is_delete)
 		perm &= ~b_perm;
 	else
 		perm |= b_perm;
-	*a_perm = perm;
+	WRITE_ONCE(*a_perm, perm);
 	return !perm;
 }
 
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c
index a40abb0b91eee..cd458e10cf2af 100644
--- a/security/tomoyo/util.c
+++ b/security/tomoyo/util.c
@@ -1053,30 +1053,30 @@ bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r)
 
 		if (ptr->is_deleted)
 			continue;
+		/*
+		 * Reading perm bitmap might race with tomoyo_merge_*() because
+		 * caller does not hold tomoyo_policy_lock mutex. But exceeding
+		 * max_learning_entry parameter by a few entries does not harm.
+		 */
 		switch (ptr->type) {
 		case TOMOYO_TYPE_PATH_ACL:
-			perm = container_of(ptr, struct tomoyo_path_acl, head)
-				->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_path_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_PATH2_ACL:
-			perm = container_of(ptr, struct tomoyo_path2_acl, head)
-				->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_path2_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_PATH_NUMBER_ACL:
-			perm = container_of(ptr, struct tomoyo_path_number_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_path_number_acl, head)
+				  ->perm);
 			break;
 		case TOMOYO_TYPE_MKDEV_ACL:
-			perm = container_of(ptr, struct tomoyo_mkdev_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_mkdev_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_INET_ACL:
-			perm = container_of(ptr, struct tomoyo_inet_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_inet_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_UNIX_ACL:
-			perm = container_of(ptr, struct tomoyo_unix_acl,
-					    head)->perm;
+			data_race(perm = container_of(ptr, struct tomoyo_unix_acl, head)->perm);
 			break;
 		case TOMOYO_TYPE_MANUAL_TASK_ACL:
 			perm = 0;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 36/56] nvme-core: add cancel tagset helpers
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chao Leng, Christoph Hellwig, Sasha Levin, linux-nvme

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 2547906982e2e6a0d42f8957f55af5bb51a7e55f ]

Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 20 ++++++++++++++++++++
 drivers/nvme/host/nvme.h |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 4ec5f05dabe1d..e1e574ecf031b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -351,6 +351,26 @@ bool nvme_cancel_request(struct request *req, void *data, bool reserved)
 }
 EXPORT_SYMBOL_GPL(nvme_cancel_request);
 
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->tagset) {
+		blk_mq_tagset_busy_iter(ctrl->tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_tagset);
+
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->admin_tagset) {
+		blk_mq_tagset_busy_iter(ctrl->admin_tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->admin_tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_admin_tagset);
+
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state)
 {
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 567f7ad18a91c..f843540cc238e 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -571,6 +571,8 @@ static inline bool nvme_is_aen_req(u16 qid, __u16 command_id)
 
 void nvme_complete_rq(struct request *req);
 bool nvme_cancel_request(struct request *req, void *data, bool reserved);
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl);
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl);
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state);
 bool nvme_wait_reset(struct nvme_ctrl *ctrl);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 36/56] nvme-core: add cancel tagset helpers
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-nvme, Christoph Hellwig, Chao Leng

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 2547906982e2e6a0d42f8957f55af5bb51a7e55f ]

Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 20 ++++++++++++++++++++
 drivers/nvme/host/nvme.h |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 4ec5f05dabe1d..e1e574ecf031b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -351,6 +351,26 @@ bool nvme_cancel_request(struct request *req, void *data, bool reserved)
 }
 EXPORT_SYMBOL_GPL(nvme_cancel_request);
 
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->tagset) {
+		blk_mq_tagset_busy_iter(ctrl->tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_tagset);
+
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->admin_tagset) {
+		blk_mq_tagset_busy_iter(ctrl->admin_tagset,
+				nvme_cancel_request, ctrl);
+		blk_mq_tagset_wait_completed_request(ctrl->admin_tagset);
+	}
+}
+EXPORT_SYMBOL_GPL(nvme_cancel_admin_tagset);
+
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state)
 {
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 567f7ad18a91c..f843540cc238e 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -571,6 +571,8 @@ static inline bool nvme_is_aen_req(u16 qid, __u16 command_id)
 
 void nvme_complete_rq(struct request *req);
 bool nvme_cancel_request(struct request *req, void *data, bool reserved);
+void nvme_cancel_tagset(struct nvme_ctrl *ctrl);
+void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl);
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state);
 bool nvme_wait_reset(struct nvme_ctrl *ctrl);
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 37/56] nvme-rdma: add clean action for failed reconnection
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chao Leng, Christoph Hellwig, Sasha Levin, linux-nvme

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 958dc1d32c80566f58d18f05ef1f05bd32d172c1 ]

A crash happens when inject failed reconnection.
If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 493ed7ba86ed2..fd2b4dbe9d160 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -919,12 +919,16 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
 
 	error = nvme_init_identify(&ctrl->ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 out_stop_queue:
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.admin_q);
@@ -1001,8 +1005,10 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(&ctrl->ctrl);
+	nvme_sync_io_queues(&ctrl->ctrl);
 	nvme_rdma_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(&ctrl->ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.connect_q);
 out_free_tag_set:
@@ -1144,10 +1150,18 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->ctrl.queue_count > 1)
+	if (ctrl->ctrl.queue_count > 1) {
+		nvme_stop_queues(&ctrl->ctrl);
+		nvme_sync_io_queues(&ctrl->ctrl);
+		nvme_rdma_stop_io_queues(ctrl);
+		nvme_cancel_tagset(&ctrl->ctrl);
 		nvme_rdma_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 	nvme_rdma_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 37/56] nvme-rdma: add clean action for failed reconnection
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-nvme, Christoph Hellwig, Chao Leng

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 958dc1d32c80566f58d18f05ef1f05bd32d172c1 ]

A crash happens when inject failed reconnection.
If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 493ed7ba86ed2..fd2b4dbe9d160 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -919,12 +919,16 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
 
 	error = nvme_init_identify(&ctrl->ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 out_stop_queue:
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.admin_q);
@@ -1001,8 +1005,10 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(&ctrl->ctrl);
+	nvme_sync_io_queues(&ctrl->ctrl);
 	nvme_rdma_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(&ctrl->ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->ctrl.connect_q);
 out_free_tag_set:
@@ -1144,10 +1150,18 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->ctrl.queue_count > 1)
+	if (ctrl->ctrl.queue_count > 1) {
+		nvme_stop_queues(&ctrl->ctrl);
+		nvme_sync_io_queues(&ctrl->ctrl);
+		nvme_rdma_stop_io_queues(ctrl);
+		nvme_cancel_tagset(&ctrl->ctrl);
 		nvme_rdma_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_sync_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
+	nvme_cancel_admin_tagset(&ctrl->ctrl);
 	nvme_rdma_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 38/56] nvme-tcp: add clean action for failed reconnection
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chao Leng, Christoph Hellwig, Sasha Levin, linux-nvme

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 70a99574a79f1cd4dc7ad56ea37be40844bfb97b ]

If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 6487b7897d1fb..739ac7deccd96 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1815,8 +1815,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(ctrl);
+	nvme_sync_io_queues(ctrl);
 	nvme_tcp_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->connect_q);
 out_free_tag_set:
@@ -1878,12 +1880,16 @@ static int nvme_tcp_configure_admin_queue(struct nvme_ctrl *ctrl, bool new)
 
 	error = nvme_init_identify(ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 out_stop_queue:
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->admin_q);
@@ -2003,10 +2009,18 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->queue_count > 1)
+	if (ctrl->queue_count > 1) {
+		nvme_stop_queues(ctrl);
+		nvme_sync_io_queues(ctrl);
+		nvme_tcp_stop_io_queues(ctrl);
+		nvme_cancel_tagset(ctrl);
 		nvme_tcp_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 	nvme_tcp_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 38/56] nvme-tcp: add clean action for failed reconnection
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-nvme, Christoph Hellwig, Chao Leng

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 70a99574a79f1cd4dc7ad56ea37be40844bfb97b ]

If reconnect failed after start io queues, the queues will be unquiesced
and new requests continue to be delivered. Reconnection error handling
process directly free queues without cancel suspend requests. The
suppend request will time out, and then crash due to use the queue
after free.

Add sync queues and cancel suppend requests for reconnection error
handling.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 6487b7897d1fb..739ac7deccd96 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1815,8 +1815,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new)
 
 out_wait_freeze_timed_out:
 	nvme_stop_queues(ctrl);
+	nvme_sync_io_queues(ctrl);
 	nvme_tcp_stop_io_queues(ctrl);
 out_cleanup_connect_q:
+	nvme_cancel_tagset(ctrl);
 	if (new)
 		blk_cleanup_queue(ctrl->connect_q);
 out_free_tag_set:
@@ -1878,12 +1880,16 @@ static int nvme_tcp_configure_admin_queue(struct nvme_ctrl *ctrl, bool new)
 
 	error = nvme_init_identify(ctrl);
 	if (error)
-		goto out_stop_queue;
+		goto out_quiesce_queue;
 
 	return 0;
 
+out_quiesce_queue:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 out_stop_queue:
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 out_cleanup_queue:
 	if (new)
 		blk_cleanup_queue(ctrl->admin_q);
@@ -2003,10 +2009,18 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new)
 	return 0;
 
 destroy_io:
-	if (ctrl->queue_count > 1)
+	if (ctrl->queue_count > 1) {
+		nvme_stop_queues(ctrl);
+		nvme_sync_io_queues(ctrl);
+		nvme_tcp_stop_io_queues(ctrl);
+		nvme_cancel_tagset(ctrl);
 		nvme_tcp_destroy_io_queues(ctrl, new);
+	}
 destroy_admin:
+	blk_mq_quiesce_queue(ctrl->admin_q);
+	blk_sync_queue(ctrl->admin_q);
 	nvme_tcp_stop_queue(ctrl, 0);
+	nvme_cancel_admin_tagset(ctrl);
 	nvme_tcp_destroy_admin_queue(ctrl, new);
 	return ret;
 }
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 39/56] smackfs: restrict bytes count in smackfs write functions
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (36 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 40/56] Drivers: hv: vmbus: Initialize memory to be sent to the host Sasha Levin
                   ` (16 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sabyrzhan Tasbolatov, syzbot+a71a442385a0b2815497,
	Casey Schaufler, Sasha Levin, linux-security-module

From: Sabyrzhan Tasbolatov <snovitoll@gmail.com>

[ Upstream commit 7ef4c19d245f3dc233fd4be5acea436edd1d83d8 ]

syzbot found WARNINGs in several smackfs write operations where
bytes count is passed to memdup_user_nul which exceeds
GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE.

Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO,
smk_write_net6addr accepts any label or -DELETE. I couldn't find
any general rule for other label lengths except SMK_LABELLEN,
SMK_LONGLABEL, SMK_CIPSOMAX which are documented.

Let's constrain, in general, smackfs label lengths for PAGE_SIZE.
Although fuzzer crashes write to smackfs/netlabel on 0x400000 length.

Here is a quick way to reproduce the WARNING:
python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel

Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smackfs.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index e567b4baf3a08..334299357e715 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -1167,7 +1167,7 @@ static ssize_t smk_write_net4addr(struct file *file, const char __user *buf,
 		return -EPERM;
 	if (*ppos != 0)
 		return -EINVAL;
-	if (count < SMK_NETLBLADDRMIN)
+	if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1)
 		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
@@ -1427,7 +1427,7 @@ static ssize_t smk_write_net6addr(struct file *file, const char __user *buf,
 		return -EPERM;
 	if (*ppos != 0)
 		return -EINVAL;
-	if (count < SMK_NETLBLADDRMIN)
+	if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1)
 		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
@@ -1834,6 +1834,10 @@ static ssize_t smk_write_ambient(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	/* Enough data must be present */
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2005,6 +2009,9 @@ static ssize_t smk_write_onlycap(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	if (count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2092,6 +2099,9 @@ static ssize_t smk_write_unconfined(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	if (count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2647,6 +2657,10 @@ static ssize_t smk_write_syslog(struct file *file, const char __user *buf,
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	/* Enough data must be present */
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2739,10 +2753,13 @@ static ssize_t smk_write_relabel_self(struct file *file, const char __user *buf,
 		return -EPERM;
 
 	/*
+	 * No partial write.
 	 * Enough data must be present.
 	 */
 	if (*ppos != 0)
 		return -EINVAL;
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 40/56] Drivers: hv: vmbus: Initialize memory to be sent to the host
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (37 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 39/56] smackfs: restrict bytes count in smackfs write functions Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 13:19   ` Andrea Parri
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 41/56] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind() Sasha Levin
                   ` (15 subsequent siblings)
  54 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Andrea Parri (Microsoft),
	Juan Vazquez, Michael Kelley, Wei Liu, Sasha Levin, linux-hyperv

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]

__vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory
for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown
objects they allocate respectively.  These objects contain padding bytes
and fields that are left uninitialized and that are later sent to the
host, potentially leaking guest data.  Zero initialize such fields to
avoid leaking sensitive information to the host.

Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index fbdda9938039a..f9f04b5cd303f 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -548,7 +548,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel,
 		goto error_clean_ring;
 
 	/* Create and init the channel open message */
-	open_info = kmalloc(sizeof(*open_info) +
+	open_info = kzalloc(sizeof(*open_info) +
 			   sizeof(struct vmbus_channel_open_channel),
 			   GFP_KERNEL);
 	if (!open_info) {
@@ -674,7 +674,7 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
 	unsigned long flags;
 	int ret;
 
-	info = kmalloc(sizeof(*info) +
+	info = kzalloc(sizeof(*info) +
 		       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 41/56] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind()
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (38 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 40/56] Drivers: hv: vmbus: Initialize memory to be sent to the host Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 13:20   ` Andrea Parri
  2021-02-24 12:51   ` Sasha Levin
                   ` (14 subsequent siblings)
  54 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Andrea Parri (Microsoft),
	Juan Vazquez, Michael Kelley, Wei Liu, Sasha Levin, linux-hyperv

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit e4d221b42354b2e2ddb9187a806afb651eee2cda ]

An erroneous or malicious host could send multiple rescind messages for
a same channel.  In vmbus_onoffer_rescind(), the guest maps the channel
ID to obtain a pointer to the channel object and it eventually releases
such object and associated data.  The host could time rescind messages
and lead to an use-after-free.  Add a new flag to the channel structure
to make sure that only one instance of vmbus_onoffer_rescind() can get
the reference to the channel object.

Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel_mgmt.c | 12 ++++++++++++
 include/linux/hyperv.h    |  1 +
 2 files changed, 13 insertions(+)

diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 1d44bb635bb84..a9f58840f85dc 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -1049,6 +1049,18 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
 
 	mutex_lock(&vmbus_connection.channel_mutex);
 	channel = relid2channel(rescind->child_relid);
+	if (channel != NULL) {
+		/*
+		 * Guarantee that no other instance of vmbus_onoffer_rescind()
+		 * has got a reference to the channel object.  Synchronize on
+		 * &vmbus_connection.channel_mutex.
+		 */
+		if (channel->rescind_ref) {
+			mutex_unlock(&vmbus_connection.channel_mutex);
+			return;
+		}
+		channel->rescind_ref = true;
+	}
 	mutex_unlock(&vmbus_connection.channel_mutex);
 
 	if (channel == NULL) {
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 1ce131f29f3b4..376f0f9e19650 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -786,6 +786,7 @@ struct vmbus_channel {
 	u8 monitor_bit;
 
 	bool rescind; /* got rescind msg */
+	bool rescind_ref; /* got rescind msg, got channel reference */
 	struct completion rescind_event;
 
 	u32 ringbuffer_gpadlhandle;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 42/56] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:51   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Andy Shevchenko, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8ade6d8b02b1ead741bd4f6c42921035caab6560 ]

Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
   platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
   non CR systems which list their IPC IRQ at index 0 despite being
   non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5

Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/soc-intel-quirks.h | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h
index b07df3059926d..a93987ab7f4d7 100644
--- a/sound/soc/intel/common/soc-intel-quirks.h
+++ b/sound/soc/intel/common/soc-intel-quirks.h
@@ -11,6 +11,7 @@
 
 #if IS_ENABLED(CONFIG_X86)
 
+#include <linux/dmi.h>
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
@@ -38,12 +39,36 @@ SOC_INTEL_IS_CPU(cml, KABYLAKE_L);
 
 static inline bool soc_intel_is_byt_cr(struct platform_device *pdev)
 {
+	/*
+	 * List of systems which:
+	 * 1. Use a non CR version of the Bay Trail SoC
+	 * 2. Contain at least 6 interrupt resources so that the
+	 *    platform_get_resource(pdev, IORESOURCE_IRQ, 5) check below
+	 *    succeeds
+	 * 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
+	 *
+	 * This needs to be here so that it can be shared between the SST and
+	 * SOF drivers. We rely on the compiler to optimize this out in files
+	 * where soc_intel_is_byt_cr is not used.
+	 */
+	static const struct dmi_system_id force_bytcr_table[] = {
+		{	/* Lenovo Yoga Tablet 2 series */
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+				DMI_MATCH(DMI_PRODUCT_FAMILY, "YOGATablet2"),
+			},
+		},
+		{}
+	};
 	struct device *dev = &pdev->dev;
 	int status = 0;
 
 	if (!soc_intel_is_byt())
 		return false;
 
+	if (dmi_check_system(force_bytcr_table))
+		return true;
+
 	if (iosf_mbi_available()) {
 		u32 bios_status;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 42/56] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()
@ 2021-02-24 12:51   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Pierre-Louis Bossart, Hans de Goede,
	Andy Shevchenko, Mark Brown

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8ade6d8b02b1ead741bd4f6c42921035caab6560 ]

Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
   platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
   non CR systems which list their IPC IRQ at index 0 despite being
   non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5

Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/soc-intel-quirks.h | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h
index b07df3059926d..a93987ab7f4d7 100644
--- a/sound/soc/intel/common/soc-intel-quirks.h
+++ b/sound/soc/intel/common/soc-intel-quirks.h
@@ -11,6 +11,7 @@
 
 #if IS_ENABLED(CONFIG_X86)
 
+#include <linux/dmi.h>
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
@@ -38,12 +39,36 @@ SOC_INTEL_IS_CPU(cml, KABYLAKE_L);
 
 static inline bool soc_intel_is_byt_cr(struct platform_device *pdev)
 {
+	/*
+	 * List of systems which:
+	 * 1. Use a non CR version of the Bay Trail SoC
+	 * 2. Contain at least 6 interrupt resources so that the
+	 *    platform_get_resource(pdev, IORESOURCE_IRQ, 5) check below
+	 *    succeeds
+	 * 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
+	 *
+	 * This needs to be here so that it can be shared between the SST and
+	 * SOF drivers. We rely on the compiler to optimize this out in files
+	 * where soc_intel_is_byt_cr is not used.
+	 */
+	static const struct dmi_system_id force_bytcr_table[] = {
+		{	/* Lenovo Yoga Tablet 2 series */
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+				DMI_MATCH(DMI_PRODUCT_FAMILY, "YOGATablet2"),
+			},
+		},
+		{}
+	};
 	struct device *dev = &pdev->dev;
 	int status = 0;
 
 	if (!soc_intel_is_byt())
 		return false;
 
+	if (dmi_check_system(force_bytcr_table))
+		return true;
+
 	if (iosf_mbi_available()) {
 		u32 bios_status;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 43/56] btrfs: fix error handling in commit_fs_roots
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (40 preceding siblings ...)
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:51 ` Sasha Levin
  2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 44/56] btrfs: make btrfs_start_delalloc_root's nr argument a long Sasha Levin
                   ` (12 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:51 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Josef Bacik, David Sterba, Sasha Levin, linux-btrfs

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 4f4317c13a40194940acf4a71670179c4faca2b5 ]

While doing error injection I would sometimes get a corrupt file system.
This is because I was injecting errors at btrfs_search_slot, but would
only do it one time per stack.  This uncovered a problem in
commit_fs_roots, where if we get an error we would just break.  However
we're in a nested loop, the first loop being a loop to find all the
dirty fs roots, and then subsequent root updates would succeed clearing
the error value.

This isn't likely to happen in real scenarios, however we could
potentially get a random ENOMEM once and then not again, and we'd end up
with a corrupted file system.  Fix this by moving the error checking
around a bit to the main loop, as this is the only place where something
will fail, and return the error as soon as it occurs.

With this patch my reproducer no longer corrupts the file system.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/transaction.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 96dbfc011f45d..261a50708cb89 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1320,7 +1320,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 	struct btrfs_root *gang[8];
 	int i;
 	int ret;
-	int err = 0;
 
 	spin_lock(&fs_info->fs_roots_radix_lock);
 	while (1) {
@@ -1332,6 +1331,8 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			break;
 		for (i = 0; i < ret; i++) {
 			struct btrfs_root *root = gang[i];
+			int ret2;
+
 			radix_tree_tag_clear(&fs_info->fs_roots_radix,
 					(unsigned long)root->root_key.objectid,
 					BTRFS_ROOT_TRANS_TAG);
@@ -1353,17 +1354,17 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 						    root->node);
 			}
 
-			err = btrfs_update_root(trans, fs_info->tree_root,
+			ret2 = btrfs_update_root(trans, fs_info->tree_root,
 						&root->root_key,
 						&root->root_item);
+			if (ret2)
+				return ret2;
 			spin_lock(&fs_info->fs_roots_radix_lock);
-			if (err)
-				break;
 			btrfs_qgroup_free_meta_all_pertrans(root);
 		}
 	}
 	spin_unlock(&fs_info->fs_roots_radix_lock);
-	return err;
+	return 0;
 }
 
 /*
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 44/56] btrfs: make btrfs_start_delalloc_root's nr argument a long
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (41 preceding siblings ...)
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 43/56] btrfs: fix error handling in commit_fs_roots Sasha Levin
@ 2021-02-24 12:52 ` Sasha Levin
  2021-02-24 12:52   ` Sasha Levin
                   ` (11 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nikolay Borisov, Josef Bacik, David Sterba, Sasha Levin, linux-btrfs

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 9db4dc241e87fccd8301357d5ef908f40b50f2e3 ]

It's currently u64 which gets instantly translated either to LONG_MAX
(if U64_MAX is passed) or cast to an unsigned long (which is in fact,
wrong because writeback_control::nr_to_write is a signed, long type).

Just convert the function's argument to be long time which obviates the
need to manually convert u64 value to a long. Adjust all call sites
which pass U64_MAX to pass LONG_MAX. Finally ensure that in
shrink_delalloc the u64 is converted to a long without overflowing,
resulting in a negative number.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ctree.h       | 2 +-
 fs/btrfs/dev-replace.c | 2 +-
 fs/btrfs/inode.c       | 6 +++---
 fs/btrfs/ioctl.c       | 2 +-
 fs/btrfs/space-info.c  | 3 ++-
 5 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 30ea9780725ff..2d1cec2e7f754 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3004,7 +3004,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 			       u32 min_type);
 
 int btrfs_start_delalloc_snapshot(struct btrfs_root *root);
-int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr,
+int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr,
 			       bool in_reclaim_context);
 int btrfs_set_extent_delalloc(struct btrfs_inode *inode, u64 start, u64 end,
 			      unsigned int extra_bits,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index d297804631829..711b24613c22b 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -703,7 +703,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info,
 	 * flush all outstanding I/O and inode extent mappings before the
 	 * copy operation is declared as being finished
 	 */
-	ret = btrfs_start_delalloc_roots(fs_info, U64_MAX, false);
+	ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false);
 	if (ret) {
 		mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
 		return ret;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index acc47e2ffb46b..b0770288fdcdd 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -9485,11 +9485,11 @@ int btrfs_start_delalloc_snapshot(struct btrfs_root *root)
 	return start_delalloc_inodes(root, &wbc, true, false);
 }
 
-int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr,
+int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr,
 			       bool in_reclaim_context)
 {
 	struct writeback_control wbc = {
-		.nr_to_write = (nr == U64_MAX) ? LONG_MAX : (unsigned long)nr,
+		.nr_to_write = nr,
 		.sync_mode = WB_SYNC_NONE,
 		.range_start = 0,
 		.range_end = LLONG_MAX,
@@ -9511,7 +9511,7 @@ int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, u64 nr,
 		 * Reset nr_to_write here so we know that we're doing a full
 		 * flush.
 		 */
-		if (nr == U64_MAX)
+		if (nr == LONG_MAX)
 			wbc.nr_to_write = LONG_MAX;
 
 		root = list_first_entry(&splice, struct btrfs_root,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index bd46e107f955e..5122961b35f41 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -4940,7 +4940,7 @@ long btrfs_ioctl(struct file *file, unsigned int
 	case BTRFS_IOC_SYNC: {
 		int ret;
 
-		ret = btrfs_start_delalloc_roots(fs_info, U64_MAX, false);
+		ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false);
 		if (ret)
 			return ret;
 		ret = btrfs_sync_fs(inode->i_sb, 1);
diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index e8347461c8ddd..84fb94e78a8ff 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -532,7 +532,8 @@ static void shrink_delalloc(struct btrfs_fs_info *fs_info,
 
 	loops = 0;
 	while ((delalloc_bytes || dio_bytes) && loops < 3) {
-		u64 nr_pages = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT;
+		u64 temp = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT;
+		long nr_pages = min_t(u64, temp, LONG_MAX);
 
 		btrfs_start_delalloc_roots(fs_info, nr_pages, true);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 45/56] drm/amdgpu: enable only one high prio compute queue
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
  2021-02-24 12:51   ` Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
                     ` (52 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nirmoy Das, Christian König, Alex Deucher, Sasha Levin,
	amd-gfx, dri-devel

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h |  2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c  |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c   |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   |  7 ++-----
 5 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index c485ec86804e5..034a0f3b4c660 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
-	int cond;
-	/* Policy: alternate between normal and high priority */
-	cond = multipipe_policy ? pipe : queue;
-
-	return ((cond % 2) != 0);
+	/* Policy: use 1st queue as high priority compute queue if we
+	 * have more than one compute queue.
+	 */
+	if (adev->gfx.num_compute_rings > 1 &&
+	    ring == &adev->gfx.compute_ring[0])
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index f353a5b71804e..6e0cba6f4bdcd 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -373,7 +373,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 4ebb43e090999..4cc83b399b66b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -4334,8 +4334,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -6361,8 +6360,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index c36258d56b445..f2f603fa0288d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1915,8 +1915,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -4434,8 +4433,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 957c12b727676..fa843bda70ba3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	return amdgpu_ring_init(adev, ring, 1024,
@@ -3384,9 +3383,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev,
-							      ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 45/56] drm/amdgpu: enable only one high prio compute queue
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Nirmoy Das, amd-gfx, Alex Deucher,
	Christian König

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h |  2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c  |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c   |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   |  7 ++-----
 5 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index c485ec86804e5..034a0f3b4c660 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
-	int cond;
-	/* Policy: alternate between normal and high priority */
-	cond = multipipe_policy ? pipe : queue;
-
-	return ((cond % 2) != 0);
+	/* Policy: use 1st queue as high priority compute queue if we
+	 * have more than one compute queue.
+	 */
+	if (adev->gfx.num_compute_rings > 1 &&
+	    ring == &adev->gfx.compute_ring[0])
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index f353a5b71804e..6e0cba6f4bdcd 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -373,7 +373,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 4ebb43e090999..4cc83b399b66b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -4334,8 +4334,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -6361,8 +6360,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index c36258d56b445..f2f603fa0288d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1915,8 +1915,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -4434,8 +4433,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 957c12b727676..fa843bda70ba3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	return amdgpu_ring_init(adev, ring, 1024,
@@ -3384,9 +3383,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev,
-							      ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 45/56] drm/amdgpu: enable only one high prio compute queue
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, dri-devel, Nirmoy Das, amd-gfx, Alex Deucher,
	Christian König

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 8c0225d79273968a65e73a4204fba023ae02714d ]

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 15 ++++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h |  2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c  |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c   |  6 ++----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   |  7 ++-----
 5 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index c485ec86804e5..034a0f3b4c660 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
-	int cond;
-	/* Policy: alternate between normal and high priority */
-	cond = multipipe_policy ? pipe : queue;
-
-	return ((cond % 2) != 0);
+	/* Policy: use 1st queue as high priority compute queue if we
+	 * have more than one compute queue.
+	 */
+	if (adev->gfx.num_compute_rings > 1 &&
+	    ring == &adev->gfx.compute_ring[0])
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index f353a5b71804e..6e0cba6f4bdcd 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -373,7 +373,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 4ebb43e090999..4cc83b399b66b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -4334,8 +4334,7 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -6361,8 +6360,7 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index c36258d56b445..f2f603fa0288d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1915,8 +1915,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
@@ -4434,8 +4433,7 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 957c12b727676..fa843bda70ba3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2228,8 +2228,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->pipe,
-							    ring->queue) ?
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring) ?
 			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	return amdgpu_ring_init(adev, ring, 1024,
@@ -3384,9 +3383,7 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	struct amdgpu_device *adev = ring->adev;
 
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
-		if (amdgpu_gfx_is_high_priority_compute_queue(adev,
-							      ring->pipe,
-							      ring->queue)) {
+		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 46/56] perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[]
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (43 preceding siblings ...)
  2021-02-24 12:52   ` Sasha Levin
@ 2021-02-24 12:52 ` Sasha Levin
  2021-02-24 12:52   ` Sasha Levin
                   ` (9 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Jim Mattson, Peter Zijlstra, Andi Kleen, Sasha Levin

From: Jim Mattson <jmattson@google.com>

[ Upstream commit b3c3361fe325074d4144c29d46daae4fc5a268d5 ]

Cascade Lake Xeon parts have the same model number as Skylake Xeon
parts, so they are tagged with the intel_pebs_isolation
quirk. However, as with Skylake Xeon H0 stepping parts, the PEBS
isolation issue is fixed in all microcode versions.

Add the Cascade Lake Xeon steppings (5, 6, and 7) to the
isolation_ucodes[] table so that these parts benefit from Andi's
optimization in commit 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary
work in guest filtering").

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20210205191324.2889006-1-jmattson@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 7d4d89fa8647a..aaa7bffdb20f5 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -4384,6 +4384,9 @@ static const struct x86_cpu_desc isolation_ucodes[] = {
 	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_X,		 2, 0x0b000014),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 3, 0x00000021),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 4, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 5, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 6, 0x00000000),
+	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 7, 0x00000000),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_L,		 3, 0x0000007c),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE,		 3, 0x0000007c),
 	INTEL_CPU_DESC(INTEL_FAM6_KABYLAKE,		 9, 0x0000004e),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 47/56] ASoC: Intel: sof-sdw: indent and add quirks consistently
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pierre-Louis Bossart, Guennadi Liakhovetski, Kai Vehmanen,
	Mark Brown, Sasha Levin, alsa-devel

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 8caf37e2be761688c396c609880936a807af490f ]

Use the same style for all quirks to avoid misses and errors

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index a8d43c87cb5a2..2d2b0519eee25 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -113,9 +113,10 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME,
 				  "Tiger Lake Client Platform"),
 		},
-		.driver_data = (void *)(SOF_RT711_JD_SRC_JD1 |
-				SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
-				SOF_SSP_PORT(SOF_I2S_SSP2)),
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_RT711_JD_SRC_JD1 |
+					SOF_SDW_PCH_DMIC |
+					SOF_SSP_PORT(SOF_I2S_SSP2)),
 	},
 	{
 		.callback = sof_sdw_quirk_cb,
@@ -139,7 +140,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Volteer"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 	{
@@ -148,7 +150,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Ripto"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 47/56] ASoC: Intel: sof-sdw: indent and add quirks consistently
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Kai Vehmanen, Guennadi Liakhovetski,
	Pierre-Louis Bossart, Mark Brown

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 8caf37e2be761688c396c609880936a807af490f ]

Use the same style for all quirks to avoid misses and errors

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index a8d43c87cb5a2..2d2b0519eee25 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -113,9 +113,10 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME,
 				  "Tiger Lake Client Platform"),
 		},
-		.driver_data = (void *)(SOF_RT711_JD_SRC_JD1 |
-				SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
-				SOF_SSP_PORT(SOF_I2S_SSP2)),
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_RT711_JD_SRC_JD1 |
+					SOF_SDW_PCH_DMIC |
+					SOF_SSP_PORT(SOF_I2S_SSP2)),
 	},
 	{
 		.callback = sof_sdw_quirk_cb,
@@ -139,7 +140,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Volteer"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 	{
@@ -148,7 +150,8 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Ripto"),
 		},
-		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI |
+					SOF_SDW_PCH_DMIC |
 					SOF_SDW_FOUR_SPK),
 	},
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 48/56] ASoC: Intel: sof_sdw: detect DMIC number based on mach params
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rander Wang, Bard Liao, Pierre-Louis Bossart, Mark Brown,
	Sasha Levin, alsa-devel

From: Rander Wang <rander.wang@intel.com>

[ Upstream commit f88dcb9b98d3f86ead04d2453475267910448bb8 ]

Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.

Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 2d2b0519eee25..a30c1d7b3d95f 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -923,7 +923,7 @@ static int sof_card_dai_links_create(struct device *dev,
 		ctx->idisp_codec = true;
 
 	/* enable dmic01 & dmic16k */
-	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC) ? 2 : 0;
+	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC || mach_params->dmic_num) ? 2 : 0;
 	comp_num += dmic_num;
 
 	dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d", sdw_be_num, ssp_num,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 48/56] ASoC: Intel: sof_sdw: detect DMIC number based on mach params
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Pierre-Louis Bossart, Rander Wang,
	Mark Brown, Bard Liao

From: Rander Wang <rander.wang@intel.com>

[ Upstream commit f88dcb9b98d3f86ead04d2453475267910448bb8 ]

Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.

Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 2d2b0519eee25..a30c1d7b3d95f 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -923,7 +923,7 @@ static int sof_card_dai_links_create(struct device *dev,
 		ctx->idisp_codec = true;
 
 	/* enable dmic01 & dmic16k */
-	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC) ? 2 : 0;
+	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC || mach_params->dmic_num) ? 2 : 0;
 	comp_num += dmic_num;
 
 	dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d", sdw_be_num, ssp_num,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 49/56] erofs: fix shift-out-of-bounds of blkszbits
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gao Xiang, syzbot+c68f467cd7c45860e8d4, Chao Yu, Sasha Levin,
	linux-erofs

From: Gao Xiang <hsiangkao@redhat.com>

[ Upstream commit bde545295b710bdd13a0fcd4b9fddd2383eeeb3a ]

syzbot generated a crafted bitszbits which can be shifted
out-of-bounds[1]. So directly print unsupported blkszbits
instead of blksize.

[1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com

Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com
Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/erofs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index be10b16ea66ee..d5a6b9b888a56 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -158,8 +158,8 @@ static int erofs_read_superblock(struct super_block *sb)
 	blkszbits = dsb->blkszbits;
 	/* 9(512 bytes) + LOG_SECTORS_PER_BLOCK == LOG_BLOCK_SIZE */
 	if (blkszbits != LOG_BLOCK_SIZE) {
-		erofs_err(sb, "blksize %u isn't supported on this platform",
-			  1 << blkszbits);
+		erofs_err(sb, "blkszbits %u isn't supported on this platform",
+			  blkszbits);
 		goto out;
 	}
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 49/56] erofs: fix shift-out-of-bounds of blkszbits
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, syzbot+c68f467cd7c45860e8d4, linux-erofs

From: Gao Xiang <hsiangkao@redhat.com>

[ Upstream commit bde545295b710bdd13a0fcd4b9fddd2383eeeb3a ]

syzbot generated a crafted bitszbits which can be shifted
out-of-bounds[1]. So directly print unsupported blkszbits
instead of blksize.

[1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com

Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com
Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/erofs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index be10b16ea66ee..d5a6b9b888a56 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -158,8 +158,8 @@ static int erofs_read_superblock(struct super_block *sb)
 	blkszbits = dsb->blkszbits;
 	/* 9(512 bytes) + LOG_SECTORS_PER_BLOCK == LOG_BLOCK_SIZE */
 	if (blkszbits != LOG_BLOCK_SIZE) {
-		erofs_err(sb, "blksize %u isn't supported on this platform",
-			  1 << blkszbits);
+		erofs_err(sb, "blkszbits %u isn't supported on this platform",
+			  blkszbits);
 		goto out;
 	}
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 50/56] parisc: Bump 64-bit IRQ stack size to 64 KB
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (47 preceding siblings ...)
  2021-02-24 12:52   ` Sasha Levin
@ 2021-02-24 12:52 ` Sasha Levin
  2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 51/56] xen-blkback: fix error handling in xen_blkbk_map() Sasha Levin
                   ` (5 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: John David Anglin, Helge Deller, Sasha Levin, linux-parisc

From: John David Anglin <dave.anglin@bell.net>

[ Upstream commit 31680c1d1595a59e17c14ec036b192a95f8e5f4a ]

Bump 64-bit IRQ stack size to 64 KB.

I had a kernel IRQ stack overflow on the mx3210 debian buildd machine.  This patch increases the
64-bit IRQ stack size to 64 KB.  The 64-bit stack size needs to be larger than the 32-bit stack
size since registers are twice as big.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/irq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index e76c866199493..60f5829d476f5 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -376,7 +376,11 @@ static inline int eirr_to_irq(unsigned long eirr)
 /*
  * IRQ STACK - used for irq handler
  */
+#ifdef CONFIG_64BIT
+#define IRQ_STACK_SIZE      (4096 << 4) /* 64k irq stack size */
+#else
 #define IRQ_STACK_SIZE      (4096 << 3) /* 32k irq stack size */
+#endif
 
 union irq_stack_union {
 	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 51/56] xen-blkback: fix error handling in xen_blkbk_map()
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (48 preceding siblings ...)
  2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 50/56] parisc: Bump 64-bit IRQ stack size to 64 KB Sasha Levin
@ 2021-02-24 12:52 ` Sasha Levin
  2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 52/56] sched/features: Fix hrtick reprogramming Sasha Levin
                   ` (4 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jan Beulich, Juergen Gross, Julien Grall, Sasha Levin, xen-devel,
	linux-block

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 ]

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/xen-blkback/blkback.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index 9ebf53903d7bf..9301de1386436 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -794,8 +794,13 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring,
 			pages[i]->persistent_gnt = persistent_gnt;
 		} else {
 			if (gnttab_page_cache_get(&ring->free_pages,
-						  &pages[i]->page))
-				goto out_of_memory;
+						  &pages[i]->page)) {
+				gnttab_page_cache_put(&ring->free_pages,
+						      pages_to_gnt,
+						      segs_to_map);
+				ret = -ENOMEM;
+				goto out;
+			}
 			addr = vaddr(pages[i]->page);
 			pages_to_gnt[segs_to_map] = pages[i]->page;
 			pages[i]->persistent_gnt = NULL;
@@ -882,17 +887,18 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring,
 	}
 	segs_to_map = 0;
 	last_map = map_until;
-	if (map_until != num)
+	if (!ret && map_until != num)
 		goto again;
 
-	return ret;
-
-out_of_memory:
-	pr_alert("%s: out of memory\n", __func__);
-	gnttab_page_cache_put(&ring->free_pages, pages_to_gnt, segs_to_map);
-	for (i = last_map; i < num; i++)
+out:
+	for (i = last_map; i < num; i++) {
+		/* Don't zap current batch's valid persistent grants. */
+		if(i >= last_map + segs_to_map)
+			pages[i]->persistent_gnt = NULL;
 		pages[i]->handle = BLKBACK_INVALID_HANDLE;
-	return -ENOMEM;
+	}
+
+	return ret;
 }
 
 static int xen_blkbk_map_seg(struct pending_req *pending_req)
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 52/56] sched/features: Fix hrtick reprogramming
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
                   ` (49 preceding siblings ...)
  2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 51/56] xen-blkback: fix error handling in xen_blkbk_map() Sasha Levin
@ 2021-02-24 12:52 ` Sasha Levin
  2021-02-24 12:52   ` Sasha Levin
                   ` (3 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Juri Lelli, Luis Claudio R . Goncalves,
	Daniel Bristot de Oliveira, Peter Zijlstra, Ingo Molnar,
	Sasha Levin

From: Juri Lelli <juri.lelli@redhat.com>

[ Upstream commit 156ec6f42b8d300dbbf382738ff35c8bad8f4c3a ]

Hung tasks and RCU stall cases were reported on systems which were not
100% busy. Investigation of such unexpected cases (no sign of potential
starvation caused by tasks hogging the system) pointed out that the
periodic sched tick timer wasn't serviced anymore after a certain point
and that caused all machinery that depends on it (timers, RCU, etc.) to
stop working as well. This issues was however only reproducible if
HRTICK was enabled.

Looking at core dumps it was found that the rbtree of the hrtimer base
used also for the hrtick was corrupted (i.e. next as seen from the base
root and actual leftmost obtained by traversing the tree are different).
Same base is also used for periodic tick hrtimer, which might get "lost"
if the rbtree gets corrupted.

Much alike what described in commit 1f71addd34f4c ("tick/sched: Do not
mess with an enqueued hrtimer") there is a race window between
hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in
__hrtick_restart() in which the former might be operating on an already
queued hrtick hrtimer, which might lead to corruption of the base.

Use hrtick_start() (which removes the timer before enqueuing it back) to
ensure hrtick hrtimer reprogramming is entirely guarded by the base
lock, so that no race conditions can occur.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c  | 8 +++-----
 kernel/sched/sched.h | 1 +
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 269165bf440af..3a150445e0cba 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -363,8 +363,9 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer)
 static void __hrtick_restart(struct rq *rq)
 {
 	struct hrtimer *timer = &rq->hrtick_timer;
+	ktime_t time = rq->hrtick_time;
 
-	hrtimer_start_expires(timer, HRTIMER_MODE_ABS_PINNED_HARD);
+	hrtimer_start(timer, time, HRTIMER_MODE_ABS_PINNED_HARD);
 }
 
 /*
@@ -388,7 +389,6 @@ static void __hrtick_start(void *arg)
 void hrtick_start(struct rq *rq, u64 delay)
 {
 	struct hrtimer *timer = &rq->hrtick_timer;
-	ktime_t time;
 	s64 delta;
 
 	/*
@@ -396,9 +396,7 @@ void hrtick_start(struct rq *rq, u64 delay)
 	 * doesn't make sense and can cause timer DoS.
 	 */
 	delta = max_t(s64, delay, 10000LL);
-	time = ktime_add_ns(timer->base->get_time(), delta);
-
-	hrtimer_set_expires(timer, time);
+	rq->hrtick_time = ktime_add_ns(timer->base->get_time(), delta);
 
 	if (rq == this_rq())
 		__hrtick_restart(rq);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index c122176c627ec..fac1b121d1130 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1018,6 +1018,7 @@ struct rq {
 	call_single_data_t	hrtick_csd;
 #endif
 	struct hrtimer		hrtick_timer;
+	ktime_t 		hrtick_time;
 #endif
 
 #ifdef CONFIG_SCHEDSTATS
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 53/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]

The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index db3633de9122f..be874d2a109b9 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -515,6 +515,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Estar Beauty HD MID 7316R */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 53/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]

The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index db3633de9122f..be874d2a109b9 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -515,6 +515,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Estar Beauty HD MID 7316R */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 54/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]

The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index be874d2a109b9..626677fa1b5c0 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -799,6 +799,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Voyo Winpad A15 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 54/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]

The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index be874d2a109b9..626677fa1b5c0 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -799,6 +799,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Voyo Winpad A15 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 55/56] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]

Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.

Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 688b5e0a49e32..bf8b87d45cb0a 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 					BYT_RT5651_SSP0_AIF1 |
 					BYT_RT5651_MONO_SPEAKER),
 	},
+	{
+		/* Jumper EZpad 7 */
+		.callback = byt_rt5651_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+		.driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+					BYT_RT5651_IN2_MAP |
+					BYT_RT5651_JD_NOT_INV),
+	},
 	{
 		/* KIANO SlimNote 14.2 */
 		.callback = byt_rt5651_quirk_cb,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 55/56] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]

Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.

Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 688b5e0a49e32..bf8b87d45cb0a 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 					BYT_RT5651_SSP0_AIF1 |
 					BYT_RT5651_MONO_SPEAKER),
 	},
+	{
+		/* Jumper EZpad 7 */
+		.callback = byt_rt5651_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+		.driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+					BYT_RT5651_IN2_MAP |
+					BYT_RT5651_JD_NOT_INV),
+	},
 	{
 		/* KIANO SlimNote 14.2 */
 		.callback = byt_rt5651_quirk_cb,
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 56/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
  2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
@ 2021-02-24 12:52   ` Sasha Levin
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
                     ` (53 subsequent siblings)
  54 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hans de Goede, Pierre-Louis Bossart, Mark Brown, Sasha Levin, alsa-devel

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]

The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.

Add a quirk for the mic and jack-detect settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 626677fa1b5c0..3af4cb87032ce 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -402,6 +402,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Acer One 10 S1002 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* [PATCH AUTOSEL 5.10 56/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
@ 2021-02-24 12:52   ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-24 12:52 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hans de Goede, alsa-devel, Mark Brown, Pierre-Louis Bossart

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]

The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.

Add a quirk for the mic and jack-detect settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 626677fa1b5c0..3af4cb87032ce 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -402,6 +402,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Acer One 10 S1002 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 50/67] Drivers: hv: vmbus: Initialize memory to be sent to the host
  2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 50/67] Drivers: hv: vmbus: Initialize memory to be sent to the host Sasha Levin
@ 2021-02-24 13:16   ` Andrea Parri
  2021-02-24 13:30     ` Andrea Parri
  0 siblings, 1 reply; 207+ messages in thread
From: Andrea Parri @ 2021-02-24 13:16 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Juan Vazquez, Michael Kelley, Wei Liu,
	linux-hyperv

On Wed, Feb 24, 2021 at 07:50:08AM -0500, Sasha Levin wrote:
> From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>
> 
> [ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]
> 
> __vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory
> for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown
> objects they allocate respectively.  These objects contain padding bytes
> and fields that are left uninitialized and that are later sent to the
> host, potentially leaking guest data.  Zero initialize such fields to
> avoid leaking sensitive information to the host.
> 
> Reported-by: Juan Vazquez <juvazq@microsoft.com>
> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
> Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Sasha - This patch is one of a group of patches where a Linux guest running on
Hyper-V will start assuming that hypervisor behavior might be malicious, and
guards against such behavior.  Because this is a new assumption, these patches
are more properly treated as new functionality rather than as bug fixes.  So I
would propose that we *not* bring such patches back to stable branches.

Thanks,
  Andrea


> ---
>  drivers/hv/channel.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
> index 6fb0c76bfbf81..0bd202de79600 100644
> --- a/drivers/hv/channel.c
> +++ b/drivers/hv/channel.c
> @@ -618,7 +618,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel,
>  		goto error_clean_ring;
>  
>  	/* Create and init the channel open message */
> -	open_info = kmalloc(sizeof(*open_info) +
> +	open_info = kzalloc(sizeof(*open_info) +
>  			   sizeof(struct vmbus_channel_open_channel),
>  			   GFP_KERNEL);
>  	if (!open_info) {
> @@ -745,7 +745,7 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
>  	unsigned long flags;
>  	int ret;
>  
> -	info = kmalloc(sizeof(*info) +
> +	info = kzalloc(sizeof(*info) +
>  		       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
>  	if (!info)
>  		return -ENOMEM;
> -- 
> 2.27.0
> 

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 51/67] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind()
  2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 51/67] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind() Sasha Levin
@ 2021-02-24 13:17   ` Andrea Parri
  0 siblings, 0 replies; 207+ messages in thread
From: Andrea Parri @ 2021-02-24 13:17 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Juan Vazquez, Michael Kelley, Wei Liu,
	linux-hyperv

On Wed, Feb 24, 2021 at 07:50:09AM -0500, Sasha Levin wrote:
> From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>
> 
> [ Upstream commit e4d221b42354b2e2ddb9187a806afb651eee2cda ]
> 
> An erroneous or malicious host could send multiple rescind messages for
> a same channel.  In vmbus_onoffer_rescind(), the guest maps the channel
> ID to obtain a pointer to the channel object and it eventually releases
> such object and associated data.  The host could time rescind messages
> and lead to an use-after-free.  Add a new flag to the channel structure
> to make sure that only one instance of vmbus_onoffer_rescind() can get
> the reference to the channel object.
> 
> Reported-by: Juan Vazquez <juvazq@microsoft.com>
> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
> Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Sasha - This patch is one of a group of patches where a Linux guest running on
Hyper-V will start assuming that hypervisor behavior might be malicious, and
guards against such behavior.  Because this is a new assumption, these patches
are more properly treated as new functionality rather than as bug fixes.  So I
would propose that we *not* bring such patches back to stable branches.

Thanks,
  Andrea


> ---
>  drivers/hv/channel_mgmt.c | 12 ++++++++++++
>  include/linux/hyperv.h    |  1 +
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
> index 1d44bb635bb84..a9f58840f85dc 100644
> --- a/drivers/hv/channel_mgmt.c
> +++ b/drivers/hv/channel_mgmt.c
> @@ -1049,6 +1049,18 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
>  
>  	mutex_lock(&vmbus_connection.channel_mutex);
>  	channel = relid2channel(rescind->child_relid);
> +	if (channel != NULL) {
> +		/*
> +		 * Guarantee that no other instance of vmbus_onoffer_rescind()
> +		 * has got a reference to the channel object.  Synchronize on
> +		 * &vmbus_connection.channel_mutex.
> +		 */
> +		if (channel->rescind_ref) {
> +			mutex_unlock(&vmbus_connection.channel_mutex);
> +			return;
> +		}
> +		channel->rescind_ref = true;
> +	}
>  	mutex_unlock(&vmbus_connection.channel_mutex);
>  
>  	if (channel == NULL) {
> diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> index 5ddb479c4d4cb..ef3573e99d989 100644
> --- a/include/linux/hyperv.h
> +++ b/include/linux/hyperv.h
> @@ -803,6 +803,7 @@ struct vmbus_channel {
>  	u8 monitor_bit;
>  
>  	bool rescind; /* got rescind msg */
> +	bool rescind_ref; /* got rescind msg, got channel reference */
>  	struct completion rescind_event;
>  
>  	u32 ringbuffer_gpadlhandle;
> -- 
> 2.27.0
> 

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.10 40/56] Drivers: hv: vmbus: Initialize memory to be sent to the host
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 40/56] Drivers: hv: vmbus: Initialize memory to be sent to the host Sasha Levin
@ 2021-02-24 13:19   ` Andrea Parri
  0 siblings, 0 replies; 207+ messages in thread
From: Andrea Parri @ 2021-02-24 13:19 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Juan Vazquez, Michael Kelley, Wei Liu,
	linux-hyperv

On Wed, Feb 24, 2021 at 07:51:56AM -0500, Sasha Levin wrote:
> From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>
> 
> [ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]
> 
> __vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory
> for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown
> objects they allocate respectively.  These objects contain padding bytes
> and fields that are left uninitialized and that are later sent to the
> host, potentially leaking guest data.  Zero initialize such fields to
> avoid leaking sensitive information to the host.
> 
> Reported-by: Juan Vazquez <juvazq@microsoft.com>
> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
> Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Same here.

  Andrea


> ---
>  drivers/hv/channel.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
> index fbdda9938039a..f9f04b5cd303f 100644
> --- a/drivers/hv/channel.c
> +++ b/drivers/hv/channel.c
> @@ -548,7 +548,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel,
>  		goto error_clean_ring;
>  
>  	/* Create and init the channel open message */
> -	open_info = kmalloc(sizeof(*open_info) +
> +	open_info = kzalloc(sizeof(*open_info) +
>  			   sizeof(struct vmbus_channel_open_channel),
>  			   GFP_KERNEL);
>  	if (!open_info) {
> @@ -674,7 +674,7 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
>  	unsigned long flags;
>  	int ret;
>  
> -	info = kmalloc(sizeof(*info) +
> +	info = kzalloc(sizeof(*info) +
>  		       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
>  	if (!info)
>  		return -ENOMEM;
> -- 
> 2.27.0
> 

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.10 41/56] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind()
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 41/56] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind() Sasha Levin
@ 2021-02-24 13:20   ` Andrea Parri
  0 siblings, 0 replies; 207+ messages in thread
From: Andrea Parri @ 2021-02-24 13:20 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Juan Vazquez, Michael Kelley, Wei Liu,
	linux-hyperv

On Wed, Feb 24, 2021 at 07:51:57AM -0500, Sasha Levin wrote:
> From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>
> 
> [ Upstream commit e4d221b42354b2e2ddb9187a806afb651eee2cda ]
> 
> An erroneous or malicious host could send multiple rescind messages for
> a same channel.  In vmbus_onoffer_rescind(), the guest maps the channel
> ID to obtain a pointer to the channel object and it eventually releases
> such object and associated data.  The host could time rescind messages
> and lead to an use-after-free.  Add a new flag to the channel structure
> to make sure that only one instance of vmbus_onoffer_rescind() can get
> the reference to the channel object.
> 
> Reported-by: Juan Vazquez <juvazq@microsoft.com>
> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
> Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Same here.

  Andrea


> ---
>  drivers/hv/channel_mgmt.c | 12 ++++++++++++
>  include/linux/hyperv.h    |  1 +
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
> index 1d44bb635bb84..a9f58840f85dc 100644
> --- a/drivers/hv/channel_mgmt.c
> +++ b/drivers/hv/channel_mgmt.c
> @@ -1049,6 +1049,18 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
>  
>  	mutex_lock(&vmbus_connection.channel_mutex);
>  	channel = relid2channel(rescind->child_relid);
> +	if (channel != NULL) {
> +		/*
> +		 * Guarantee that no other instance of vmbus_onoffer_rescind()
> +		 * has got a reference to the channel object.  Synchronize on
> +		 * &vmbus_connection.channel_mutex.
> +		 */
> +		if (channel->rescind_ref) {
> +			mutex_unlock(&vmbus_connection.channel_mutex);
> +			return;
> +		}
> +		channel->rescind_ref = true;
> +	}
>  	mutex_unlock(&vmbus_connection.channel_mutex);
>  
>  	if (channel == NULL) {
> diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> index 1ce131f29f3b4..376f0f9e19650 100644
> --- a/include/linux/hyperv.h
> +++ b/include/linux/hyperv.h
> @@ -786,6 +786,7 @@ struct vmbus_channel {
>  	u8 monitor_bit;
>  
>  	bool rescind; /* got rescind msg */
> +	bool rescind_ref; /* got rescind msg, got channel reference */
>  	struct completion rescind_event;
>  
>  	u32 ringbuffer_gpadlhandle;
> -- 
> 2.27.0
> 

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 50/67] Drivers: hv: vmbus: Initialize memory to be sent to the host
  2021-02-24 13:16   ` Andrea Parri
@ 2021-02-24 13:30     ` Andrea Parri
  2021-02-26 17:05       ` Sasha Levin
  0 siblings, 1 reply; 207+ messages in thread
From: Andrea Parri @ 2021-02-24 13:30 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Juan Vazquez, Michael Kelley, Wei Liu,
	linux-hyperv

On Wed, Feb 24, 2021 at 02:16:00PM +0100, Andrea Parri wrote:
> On Wed, Feb 24, 2021 at 07:50:08AM -0500, Sasha Levin wrote:
> > From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>
> > 
> > [ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]
> > 
> > __vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory
> > for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown
> > objects they allocate respectively.  These objects contain padding bytes
> > and fields that are left uninitialized and that are later sent to the
> > host, potentially leaking guest data.  Zero initialize such fields to
> > avoid leaking sensitive information to the host.
> > 
> > Reported-by: Juan Vazquez <juvazq@microsoft.com>
> > Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
> > Reviewed-by: Michael Kelley <mikelley@microsoft.com>
> > Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com
> > Signed-off-by: Wei Liu <wei.liu@kernel.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> 
> Sasha - This patch is one of a group of patches where a Linux guest running on
> Hyper-V will start assuming that hypervisor behavior might be malicious, and
> guards against such behavior.  Because this is a new assumption, these patches
> are more properly treated as new functionality rather than as bug fixes.  So I
> would propose that we *not* bring such patches back to stable branches.

For future/similar cases: I'm wondering, is there some way to annotate a patch
with "please do not bring it back"?

Thanks,
  Andrea

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 55/67] btrfs: only let one thread pre-flush delayed refs in commit
  2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 55/67] btrfs: only let one thread pre-flush delayed refs in commit Sasha Levin
@ 2021-02-24 18:08   ` David Sterba
  2021-03-04 22:24     ` Sasha Levin
  0 siblings, 1 reply; 207+ messages in thread
From: David Sterba @ 2021-02-24 18:08 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Josef Bacik, Nikolay Borisov, David Sterba,
	linux-btrfs

On Wed, Feb 24, 2021 at 07:50:13AM -0500, Sasha Levin wrote:
> From: Josef Bacik <josef@toxicpanda.com>
> 
> [ Upstream commit e19eb11f4f3d3b0463cd897016064a79cb6d8c6d ]
> 
> I've been running a stress test that runs 20 workers in their own
> subvolume, which are running an fsstress instance with 4 threads per
> worker, which is 80 total fsstress threads.  In addition to this I'm
> running balance in the background as well as creating and deleting
> snapshots.  This test takes around 12 hours to run normally, going
> slower and slower as the test goes on.
> 
> The reason for this is because fsstress is running fsync sometimes, and
> because we're messing with block groups we often fall through to
> btrfs_commit_transaction, so will often have 20-30 threads all calling
> btrfs_commit_transaction at the same time.
> 
> These all get stuck contending on the extent tree while they try to run
> delayed refs during the initial part of the commit.
> 
> This is suboptimal, really because the extent tree is a single point of
> failure we only want one thread acting on that tree at once to reduce
> lock contention.
> 
> Fix this by making the flushing mechanism a bit operation, to make it
> easy to use test_and_set_bit() in order to make sure only one task does
> this initial flush.
> 
> Once we're into the transaction commit we only have one thread doing
> delayed ref running, it's just this initial pre-flush that is
> problematic.  With this patch my stress test takes around 90 minutes to
> run, instead of 12 hours.
> 
> The memory barrier is not necessary for the flushing bit as it's
> ordered, unlike plain int. The transaction state accessed in
> btrfs_should_end_transaction could be affected by that too as it's not
> always used under transaction lock. Upon Nikolay's analysis in [1]
> it's not necessary:
> 
>   In should_end_transaction it's read without holding any locks. (U)
> 
>   It's modified in btrfs_cleanup_transaction without holding the
>   fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set.
> 
>   set in cleanup_transaction under fs_info->trans_lock (L)
>   set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L)
>   set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L)
>   set in btrfs_commit_trans to COMMIT_UNBLOCK under
>   fs_info->trans_lock.(L)
> 
>   set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this
>   point the transaction is finished and fs_info->running_trans is NULL (U
>   but irrelevant).
> 
>   So by the looks of it we can have a concurrent READ race with a WRITE,
>   due to reads not taking a lock. In this case what we want to ensure is
>   we either see new or old state. I consulted with Will Deacon and he said
>   that in such a case we'd want to annotate the accesses to ->state with
>   (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I
>   don't think this could happen but I imagine at some point KCSAN would
>   flag such an access as racy (which it is).
> 
> [1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com
> 
> Reviewed-by: Nikolay Borisov <nborisov@suse.com>
> Signed-off-by: Josef Bacik <josef@toxicpanda.com>
> [ add comments regarding memory barrier ]
> Signed-off-by: David Sterba <dsterba@suse.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Please drop this patch from autosel queue, it's part of a larger series
that reworks flushing and is not a standalone fix.

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 54/67] btrfs: make btrfs_start_delalloc_root's nr argument a long
  2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 54/67] btrfs: make btrfs_start_delalloc_root's nr argument a long Sasha Levin
@ 2021-02-24 18:09   ` David Sterba
  2021-03-04 22:24     ` Sasha Levin
  0 siblings, 1 reply; 207+ messages in thread
From: David Sterba @ 2021-02-24 18:09 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Nikolay Borisov, Josef Bacik, David Sterba,
	linux-btrfs

On Wed, Feb 24, 2021 at 07:50:12AM -0500, Sasha Levin wrote:
> From: Nikolay Borisov <nborisov@suse.com>
> 
> [ Upstream commit 9db4dc241e87fccd8301357d5ef908f40b50f2e3 ]
> 
> It's currently u64 which gets instantly translated either to LONG_MAX
> (if U64_MAX is passed) or cast to an unsigned long (which is in fact,
> wrong because writeback_control::nr_to_write is a signed, long type).
> 
> Just convert the function's argument to be long time which obviates the
> need to manually convert u64 value to a long. Adjust all call sites
> which pass U64_MAX to pass LONG_MAX. Finally ensure that in
> shrink_delalloc the u64 is converted to a long without overflowing,
> resulting in a negative number.

This patch is a cleanup and I don't see any other patch depend on it, so
please drop it from autosel.

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 05/67] can: flexcan: add CAN wakeup function for i.MX8QM
  2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 05/67] can: flexcan: add CAN wakeup function for i.MX8QM Sasha Levin
@ 2021-02-25  2:48   ` Fabio Estevam
  0 siblings, 0 replies; 207+ messages in thread
From: Fabio Estevam @ 2021-02-25  2:48 UTC (permalink / raw)
  To: Sasha Levin
  Cc: linux-kernel, stable, Joakim Zhang, Marc Kleine-Budde, linux-can, netdev

Hi Sasha,

On Wed, Feb 24, 2021 at 10:35 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Joakim Zhang <qiangqing.zhang@nxp.com>
>
> [ Upstream commit 812f0116c66a3ebaf0b6062226aa85574dd79f67 ]
>
> The System Controller Firmware (SCFW) is a low-level system function
> which runs on a dedicated Cortex-M core to provide power, clock, and
> resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
> (QM, QP), and i.MX8QX (QXP, DX). SCU driver manages the IPC interface
> between host CPU and the SCU firmware running on M4.
>
> For i.MX8QM, stop mode request is controlled by System Controller Unit(SCU)
> firmware, this patch introduces FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW quirk
> for this function.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> Link: https://lore.kernel.org/r/20201106105627.31061-6-qiangqing.zhang@nxp.com
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This is adding a new feature and not fixing a bug.

Why does it qualify for stable inclusion?

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 16/67] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 12/56] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Sasha Levin
@ 2021-02-25 19:03   ` Pali Rohár
  2021-03-04 22:33     ` Sasha Levin
  0 siblings, 1 reply; 207+ messages in thread
From: Pali Rohár @ 2021-02-25 19:03 UTC (permalink / raw)
  To: Sasha Levin; +Cc: linux-kernel, stable, Jakub Kicinski, netdev

On Wednesday 24 February 2021 07:49:34 Sasha Levin wrote:
> From: Pali Rohár <pali@kernel.org>
> 
> [ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]

Hello! This commit requires also commit~1 from that patch series:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1

Without it kernel cannot read EEPROM from Ubiquiti U-Fiber Instant
module and therefore the hook based on EEPROM data which is below would
not be applied.

> The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information
> stored in its EEPROM. It claims to support all transceiver types including
> 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is
> the only one supported.
> 
> This module has also phys_id set to SFF, and the SFP subsystem currently
> does not allow to use SFP modules detected as SFFs. Add exception for this
> module so it can be detected as supported.
> 
> This change finally allows to detect and use SFP GPON module Ubiquiti
> U-Fiber Instant on Linux system.
> 
> EEPROM content of this SFP module is (where XX is serial number):
> 
> 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8    ???........??.??
> 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20    ....UBNT
> 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41        .??)UF-INSTA
> 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36    NT      4   ??.6
> 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX    .?..UBNTXXXXXXXX
> 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41        140123  `??A
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/phy/sfp-bus.c | 15 +++++++++++++++
>  drivers/net/phy/sfp.c     | 17 +++++++++++++++--
>  2 files changed, 30 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
> index 20b91f5dfc6ed..4cf874fb5c5b4 100644
> --- a/drivers/net/phy/sfp-bus.c
> +++ b/drivers/net/phy/sfp-bus.c
> @@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
>  	phylink_set(modes, 2500baseX_Full);
>  }
>  
> +static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
> +				      unsigned long *modes)
> +{
> +	/* Ubiquiti U-Fiber Instant module claims that support all transceiver
> +	 * types including 10G Ethernet which is not truth. So clear all claimed
> +	 * modes and set only one mode which module supports: 1000baseX_Full.
> +	 */
> +	phylink_zero(modes);
> +	phylink_set(modes, 1000baseX_Full);
> +}
> +
>  static const struct sfp_quirk sfp_quirks[] = {
>  	{
>  		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
> @@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = {
>  		.vendor = "HUAWEI",
>  		.part = "MA5671A",
>  		.modes = sfp_quirk_2500basex,
> +	}, {
> +		.vendor = "UBNT",
> +		.part = "UF-INSTANT",
> +		.modes = sfp_quirk_ubnt_uf_instant,
>  	},
>  };
>  
> diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
> index 91d74c1a920ab..804295ad8a044 100644
> --- a/drivers/net/phy/sfp.c
> +++ b/drivers/net/phy/sfp.c
> @@ -273,8 +273,21 @@ static const struct sff_data sff_data = {
>  
>  static bool sfp_module_supported(const struct sfp_eeprom_id *id)
>  {
> -	return id->base.phys_id == SFF8024_ID_SFP &&
> -	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
> +	if (id->base.phys_id == SFF8024_ID_SFP &&
> +	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP)
> +		return true;
> +
> +	/* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored
> +	 * phys id SFF instead of SFP. Therefore mark this module explicitly
> +	 * as supported based on vendor name and pn match.
> +	 */
> +	if (id->base.phys_id == SFF8024_ID_SFF_8472 &&
> +	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP &&
> +	    !memcmp(id->base.vendor_name, "UBNT            ", 16) &&
> +	    !memcmp(id->base.vendor_pn, "UF-INSTANT      ", 16))
> +		return true;
> +
> +	return false;
>  }
>  
>  static const struct sff_data sfp_data = {
> -- 
> 2.27.0
> 

On Wednesday 24 February 2021 07:51:28 Sasha Levin wrote:
> From: Pali Rohár <pali@kernel.org>
> 
> [ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]
> 
> The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information
> stored in its EEPROM. It claims to support all transceiver types including
> 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is
> the only one supported.
> 
> This module has also phys_id set to SFF, and the SFP subsystem currently
> does not allow to use SFP modules detected as SFFs. Add exception for this
> module so it can be detected as supported.
> 
> This change finally allows to detect and use SFP GPON module Ubiquiti
> U-Fiber Instant on Linux system.
> 
> EEPROM content of this SFP module is (where XX is serial number):
> 
> 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8    ???........??.??
> 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20    ....UBNT
> 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41        .??)UF-INSTA
> 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36    NT      4   ??.6
> 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX    .?..UBNTXXXXXXXX
> 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41        140123  `??A
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/phy/sfp-bus.c | 15 +++++++++++++++
>  drivers/net/phy/sfp.c     | 17 +++++++++++++++--
>  2 files changed, 30 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
> index 58014feedf6c8..fb954e8141802 100644
> --- a/drivers/net/phy/sfp-bus.c
> +++ b/drivers/net/phy/sfp-bus.c
> @@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
>  	phylink_set(modes, 2500baseX_Full);
>  }
>  
> +static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
> +				      unsigned long *modes)
> +{
> +	/* Ubiquiti U-Fiber Instant module claims that support all transceiver
> +	 * types including 10G Ethernet which is not truth. So clear all claimed
> +	 * modes and set only one mode which module supports: 1000baseX_Full.
> +	 */
> +	phylink_zero(modes);
> +	phylink_set(modes, 1000baseX_Full);
> +}
> +
>  static const struct sfp_quirk sfp_quirks[] = {
>  	{
>  		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
> @@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = {
>  		.vendor = "HUAWEI",
>  		.part = "MA5671A",
>  		.modes = sfp_quirk_2500basex,
> +	}, {
> +		.vendor = "UBNT",
> +		.part = "UF-INSTANT",
> +		.modes = sfp_quirk_ubnt_uf_instant,
>  	},
>  };
>  
> diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
> index 34aa196b7465c..d8a809cf20c15 100644
> --- a/drivers/net/phy/sfp.c
> +++ b/drivers/net/phy/sfp.c
> @@ -272,8 +272,21 @@ static const struct sff_data sff_data = {
>  
>  static bool sfp_module_supported(const struct sfp_eeprom_id *id)
>  {
> -	return id->base.phys_id == SFF8024_ID_SFP &&
> -	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
> +	if (id->base.phys_id == SFF8024_ID_SFP &&
> +	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP)
> +		return true;
> +
> +	/* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored
> +	 * phys id SFF instead of SFP. Therefore mark this module explicitly
> +	 * as supported based on vendor name and pn match.
> +	 */
> +	if (id->base.phys_id == SFF8024_ID_SFF_8472 &&
> +	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP &&
> +	    !memcmp(id->base.vendor_name, "UBNT            ", 16) &&
> +	    !memcmp(id->base.vendor_pn, "UF-INSTANT      ", 16))
> +		return true;
> +
> +	return false;
>  }
>  
>  static const struct sff_data sfp_data = {
> -- 
> 2.27.0
> 


^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 50/67] Drivers: hv: vmbus: Initialize memory to be sent to the host
  2021-02-24 13:30     ` Andrea Parri
@ 2021-02-26 17:05       ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-02-26 17:05 UTC (permalink / raw)
  To: Andrea Parri
  Cc: linux-kernel, stable, Juan Vazquez, Michael Kelley, Wei Liu,
	linux-hyperv

On Wed, Feb 24, 2021 at 02:30:52PM +0100, Andrea Parri wrote:
>On Wed, Feb 24, 2021 at 02:16:00PM +0100, Andrea Parri wrote:
>> On Wed, Feb 24, 2021 at 07:50:08AM -0500, Sasha Levin wrote:
>> > From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>
>> >
>> > [ Upstream commit e99c4afbee07e9323e9191a20b24d74dbf815bdf ]
>> >
>> > __vmbus_open() and vmbus_teardown_gpadl() do not inizialite the memory
>> > for the vmbus_channel_open_channel and the vmbus_channel_gpadl_teardown
>> > objects they allocate respectively.  These objects contain padding bytes
>> > and fields that are left uninitialized and that are later sent to the
>> > host, potentially leaking guest data.  Zero initialize such fields to
>> > avoid leaking sensitive information to the host.
>> >
>> > Reported-by: Juan Vazquez <juvazq@microsoft.com>
>> > Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
>> > Reviewed-by: Michael Kelley <mikelley@microsoft.com>
>> > Link: https://lore.kernel.org/r/20201209070827.29335-2-parri.andrea@gmail.com
>> > Signed-off-by: Wei Liu <wei.liu@kernel.org>
>> > Signed-off-by: Sasha Levin <sashal@kernel.org>
>>
>> Sasha - This patch is one of a group of patches where a Linux guest running on
>> Hyper-V will start assuming that hypervisor behavior might be malicious, and
>> guards against such behavior.  Because this is a new assumption, these patches
>> are more properly treated as new functionality rather than as bug fixes.  So I
>> would propose that we *not* bring such patches back to stable branches.
>
>For future/similar cases: I'm wondering, is there some way to annotate a patch
>with "please do not bring it back"?

There's nothing explicit for the AUTOSEL stuff. A note in the changelog
could work.

-- 
Thanks,
Sasha

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 55/67] btrfs: only let one thread pre-flush delayed refs in commit
  2021-02-24 18:08   ` David Sterba
@ 2021-03-04 22:24     ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-03-04 22:24 UTC (permalink / raw)
  To: dsterba, linux-kernel, stable, Josef Bacik, Nikolay Borisov,
	David Sterba, linux-btrfs

On Wed, Feb 24, 2021 at 07:08:20PM +0100, David Sterba wrote:
>On Wed, Feb 24, 2021 at 07:50:13AM -0500, Sasha Levin wrote:
>> From: Josef Bacik <josef@toxicpanda.com>
>>
>> [ Upstream commit e19eb11f4f3d3b0463cd897016064a79cb6d8c6d ]
>>
>> I've been running a stress test that runs 20 workers in their own
>> subvolume, which are running an fsstress instance with 4 threads per
>> worker, which is 80 total fsstress threads.  In addition to this I'm
>> running balance in the background as well as creating and deleting
>> snapshots.  This test takes around 12 hours to run normally, going
>> slower and slower as the test goes on.
>>
>> The reason for this is because fsstress is running fsync sometimes, and
>> because we're messing with block groups we often fall through to
>> btrfs_commit_transaction, so will often have 20-30 threads all calling
>> btrfs_commit_transaction at the same time.
>>
>> These all get stuck contending on the extent tree while they try to run
>> delayed refs during the initial part of the commit.
>>
>> This is suboptimal, really because the extent tree is a single point of
>> failure we only want one thread acting on that tree at once to reduce
>> lock contention.
>>
>> Fix this by making the flushing mechanism a bit operation, to make it
>> easy to use test_and_set_bit() in order to make sure only one task does
>> this initial flush.
>>
>> Once we're into the transaction commit we only have one thread doing
>> delayed ref running, it's just this initial pre-flush that is
>> problematic.  With this patch my stress test takes around 90 minutes to
>> run, instead of 12 hours.
>>
>> The memory barrier is not necessary for the flushing bit as it's
>> ordered, unlike plain int. The transaction state accessed in
>> btrfs_should_end_transaction could be affected by that too as it's not
>> always used under transaction lock. Upon Nikolay's analysis in [1]
>> it's not necessary:
>>
>>   In should_end_transaction it's read without holding any locks. (U)
>>
>>   It's modified in btrfs_cleanup_transaction without holding the
>>   fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set.
>>
>>   set in cleanup_transaction under fs_info->trans_lock (L)
>>   set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L)
>>   set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L)
>>   set in btrfs_commit_trans to COMMIT_UNBLOCK under
>>   fs_info->trans_lock.(L)
>>
>>   set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this
>>   point the transaction is finished and fs_info->running_trans is NULL (U
>>   but irrelevant).
>>
>>   So by the looks of it we can have a concurrent READ race with a WRITE,
>>   due to reads not taking a lock. In this case what we want to ensure is
>>   we either see new or old state. I consulted with Will Deacon and he said
>>   that in such a case we'd want to annotate the accesses to ->state with
>>   (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I
>>   don't think this could happen but I imagine at some point KCSAN would
>>   flag such an access as racy (which it is).
>>
>> [1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com
>>
>> Reviewed-by: Nikolay Borisov <nborisov@suse.com>
>> Signed-off-by: Josef Bacik <josef@toxicpanda.com>
>> [ add comments regarding memory barrier ]
>> Signed-off-by: David Sterba <dsterba@suse.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Please drop this patch from autosel queue, it's part of a larger series
>that reworks flushing and is not a standalone fix.

Will do, thanks!

-- 
Thanks,
Sasha

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 54/67] btrfs: make btrfs_start_delalloc_root's nr argument a long
  2021-02-24 18:09   ` David Sterba
@ 2021-03-04 22:24     ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-03-04 22:24 UTC (permalink / raw)
  To: dsterba, linux-kernel, stable, Nikolay Borisov, Josef Bacik,
	David Sterba, linux-btrfs

On Wed, Feb 24, 2021 at 07:09:42PM +0100, David Sterba wrote:
>On Wed, Feb 24, 2021 at 07:50:12AM -0500, Sasha Levin wrote:
>> From: Nikolay Borisov <nborisov@suse.com>
>>
>> [ Upstream commit 9db4dc241e87fccd8301357d5ef908f40b50f2e3 ]
>>
>> It's currently u64 which gets instantly translated either to LONG_MAX
>> (if U64_MAX is passed) or cast to an unsigned long (which is in fact,
>> wrong because writeback_control::nr_to_write is a signed, long type).
>>
>> Just convert the function's argument to be long time which obviates the
>> need to manually convert u64 value to a long. Adjust all call sites
>> which pass U64_MAX to pass LONG_MAX. Finally ensure that in
>> shrink_delalloc the u64 is converted to a long without overflowing,
>> resulting in a negative number.
>
>This patch is a cleanup and I don't see any other patch depend on it, so
>please drop it from autosel.

I'll drop it, thanks!

-- 
Thanks,
Sasha

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 16/67] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
  2021-02-25 19:03   ` [PATCH AUTOSEL 5.11 16/67] " Pali Rohár
@ 2021-03-04 22:33     ` Sasha Levin
  2021-03-05 23:38       ` Pali Rohár
  0 siblings, 1 reply; 207+ messages in thread
From: Sasha Levin @ 2021-03-04 22:33 UTC (permalink / raw)
  To: Pali Rohár; +Cc: linux-kernel, stable, Jakub Kicinski, netdev

On Thu, Feb 25, 2021 at 08:03:06PM +0100, Pali Rohár wrote:
>On Wednesday 24 February 2021 07:49:34 Sasha Levin wrote:
>> From: Pali Rohár <pali@kernel.org>
>>
>> [ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]
>
>Hello! This commit requires also commit~1 from that patch series:
>https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1
>
>Without it kernel cannot read EEPROM from Ubiquiti U-Fiber Instant
>module and therefore the hook based on EEPROM data which is below would
>not be applied.

Looks like that commit is already in, thanks!

-- 
Thanks,
Sasha

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.10 23/56] fs: make unlazy_walk() error handling consistent
  2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 23/56] fs: make unlazy_walk() error handling consistent Sasha Levin
@ 2021-03-05 12:40   ` Pavel Machek
  0 siblings, 0 replies; 207+ messages in thread
From: Pavel Machek @ 2021-03-05 12:40 UTC (permalink / raw)
  To: Sasha Levin; +Cc: linux-kernel, stable, Jens Axboe, Al Viro, linux-fsdevel

[-- Attachment #1: Type: text/plain, Size: 716 bytes --]

On Wed 2021-02-24 07:51:39, Sasha Levin wrote:
> From: Jens Axboe <axboe@kernel.dk>
> 
> [ Upstream commit e36cffed20a324e116f329a94061ae30dd26fb51 ]
> 
> Most callers check for non-zero return, and assume it's -ECHILD (which
> it always will be). One caller uses the actual error return. Clean this
> up and make it fully consistent, by having unlazy_walk() return a bool
> instead. Rename it to try_to_unlazy() and return true on success, and
> failure on error. That's easier to read.
> 
> No functional changes in this patch.
 
Easier to read, but not fixing bug. I don't believe this is suitable
for stable.

Best regards,
								Pavel
								
-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 16/67] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
  2021-03-04 22:33     ` Sasha Levin
@ 2021-03-05 23:38       ` Pali Rohár
  2021-03-06 17:52         ` Sasha Levin
  0 siblings, 1 reply; 207+ messages in thread
From: Pali Rohár @ 2021-03-05 23:38 UTC (permalink / raw)
  To: Sasha Levin; +Cc: linux-kernel, stable, Jakub Kicinski, netdev

On Thursday 04 March 2021 17:33:01 Sasha Levin wrote:
> On Thu, Feb 25, 2021 at 08:03:06PM +0100, Pali Rohár wrote:
> > On Wednesday 24 February 2021 07:49:34 Sasha Levin wrote:
> > > From: Pali Rohár <pali@kernel.org>
> > > 
> > > [ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]
> > 
> > Hello! This commit requires also commit~1 from that patch series:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1
> > 
> > Without it kernel cannot read EEPROM from Ubiquiti U-Fiber Instant
> > module and therefore the hook based on EEPROM data which is below would
> > not be applied.
> 
> Looks like that commit is already in, thanks!

Yes! Now I see that commit in 5.11 queue. So 5.11 would be OK.

But I do not see it in 5.10 queue. In 5.10 queue I see only backport of
f0b4f8476732 commit. 426c6cbc409c seems to be still missing.

Could you check it?

^ permalink raw reply	[flat|nested] 207+ messages in thread
* Re: [PATCH AUTOSEL 5.11 16/67] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
  2021-03-05 23:38       ` Pali Rohár
@ 2021-03-06 17:52         ` Sasha Levin
  0 siblings, 0 replies; 207+ messages in thread
From: Sasha Levin @ 2021-03-06 17:52 UTC (permalink / raw)
  To: Pali Rohár; +Cc: linux-kernel, stable, Jakub Kicinski, netdev

On Sat, Mar 06, 2021 at 12:38:02AM +0100, Pali Rohár wrote:
>On Thursday 04 March 2021 17:33:01 Sasha Levin wrote:
>> On Thu, Feb 25, 2021 at 08:03:06PM +0100, Pali Rohár wrote:
>> > On Wednesday 24 February 2021 07:49:34 Sasha Levin wrote:
>> > > From: Pali Rohár <pali@kernel.org>
>> > >
>> > > [ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ]
>> >
>> > Hello! This commit requires also commit~1 from that patch series:
>> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1
>> >
>> > Without it kernel cannot read EEPROM from Ubiquiti U-Fiber Instant
>> > module and therefore the hook based on EEPROM data which is below would
>> > not be applied.
>>
>> Looks like that commit is already in, thanks!
>
>Yes! Now I see that commit in 5.11 queue. So 5.11 would be OK.
>
>But I do not see it in 5.10 queue. In 5.10 queue I see only backport of
>f0b4f8476732 commit. 426c6cbc409c seems to be still missing.
>
>Could you check it?

Good point. It is now. Thanks!

-- 
Thanks,
Sasha

^ permalink raw reply	[flat|nested] 207+ messages in thread
end of thread, other threads:[~2021-03-06 17:53 UTC | newest]

Thread overview: 207+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-24 12:51 [PATCH AUTOSEL 5.10 01/56] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 02/56] staging: fwserial: Fix error handling in fwserial_create Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 03/56] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 04/56] vt/consolemap: do font sum unsigned Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 05/56] wlcore: Fix command execute failure 19 for wl12xx Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 06/56] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 07/56] Bluetooth: btusb: fix memory leak on suspend and resume Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 08/56] mt76: mt7615: reset token when mac_reset happens Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 09/56] pktgen: fix misuse of BUG_ON() in pktgen_thread_worker() Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 10/56] ath10k: fix wmi mgmt tx queue full due to race condition Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 11/56] x86/build: Treat R_386_PLT32 relocation as R_386_PC32 Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 12/56] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Sasha Levin
2021-02-25 19:03   ` [PATCH AUTOSEL 5.11 16/67] " Pali Rohár
2021-03-04 22:33     ` Sasha Levin
2021-03-05 23:38       ` Pali Rohár
2021-03-06 17:52         ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 13/56] Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 14/56] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 15/56] staging: most: sound: add sanity check for function argument Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 16/56] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy() Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 17/56] brcmfmac: Add DMI nvram filename quirk for Predia Basic tablet Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 18/56] brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tablet Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 19/56] drm/hisilicon: Fix use-after-free Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 20/56] udlfb: Fix memory leak in dlfb_usb_probe Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 21/56] JFS: more checks for invalid superblock Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 22/56] crypto: tcrypt - avoid signed overflow in byte count Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 23/56] fs: make unlazy_walk() error handling consistent Sasha Levin
2021-03-05 12:40   ` Pavel Machek
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 24/56] sched/core: Allow try_invoke_on_locked_down_task() with irqs disabled Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 25/56] drm/amdgpu: Add check to prevent IH overflow Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 26/56] PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 27/56] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 28/56] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 29/56] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 30/56] media: mceusb: sanity check for prescaler value Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 31/56] media: v4l2-ctrls.c: fix shift-out-of-bounds in std_validate Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 32/56] media: uvcvideo: Allow entities with no pads Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 33/56] f2fs: handle unallocated section and zone on pinned/atgc Sasha Levin
2021-02-24 12:51   ` [f2fs-dev] " Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 34/56] f2fs: fix to set/clear I_LINKABLE under i_lock Sasha Levin
2021-02-24 12:51   ` [f2fs-dev] " Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 35/56] tomoyo: ignore data race while checking quota Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 36/56] nvme-core: add cancel tagset helpers Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 37/56] nvme-rdma: add clean action for failed reconnection Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 38/56] nvme-tcp: " Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 39/56] smackfs: restrict bytes count in smackfs write functions Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 40/56] Drivers: hv: vmbus: Initialize memory to be sent to the host Sasha Levin
2021-02-24 13:19   ` Andrea Parri
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 41/56] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind() Sasha Levin
2021-02-24 13:20   ` Andrea Parri
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 42/56] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr() Sasha Levin
2021-02-24 12:51   ` Sasha Levin
2021-02-24 12:51 ` [PATCH AUTOSEL 5.10 43/56] btrfs: fix error handling in commit_fs_roots Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 44/56] btrfs: make btrfs_start_delalloc_root's nr argument a long Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 45/56] drm/amdgpu: enable only one high prio compute queue Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 46/56] perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[] Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 47/56] ASoC: Intel: sof-sdw: indent and add quirks consistently Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 48/56] ASoC: Intel: sof_sdw: detect DMIC number based on mach params Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 49/56] erofs: fix shift-out-of-bounds of blkszbits Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 50/56] parisc: Bump 64-bit IRQ stack size to 64 KB Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 51/56] xen-blkback: fix error handling in xen_blkbk_map() Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 52/56] sched/features: Fix hrtick reprogramming Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 53/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 54/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 55/56] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet Sasha Levin
2021-02-24 12:52   ` Sasha Levin
2021-02-24 12:52 ` [PATCH AUTOSEL 5.10 56/56] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet Sasha Levin
2021-02-24 12:52   ` Sasha Levin
  -- strict thread matches above, loose matches on Subject: below --
2021-02-24 12:49 [PATCH AUTOSEL 5.11 01/67] ath10k: prevent deinitializing NAPI twice Sasha Levin
2021-02-24 12:49 ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 02/67] EDAC/amd64: Do not load on family 0x15, model 0x13 Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 03/67] staging: fwserial: Fix error handling in fwserial_create Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 04/67] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 05/67] can: flexcan: add CAN wakeup function for i.MX8QM Sasha Levin
2021-02-25  2:48   ` Fabio Estevam
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 06/67] vt/consolemap: do font sum unsigned Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 07/67] wlcore: Fix command execute failure 19 for wl12xx Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 08/67] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 09/67] Bluetooth: btusb: fix memory leak on suspend and resume Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 10/67] selftests/bpf: Remove memory leak Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 11/67] mt76: mt7915: reset token when mac_reset happens Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 12/67] mt76: mt7615: " Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 13/67] pktgen: fix misuse of BUG_ON() in pktgen_thread_worker() Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 14/67] ath10k: fix wmi mgmt tx queue full due to race condition Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 15/67] x86/build: Treat R_386_PLT32 relocation as R_386_PC32 Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 16/67] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 17/67] Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 18/67] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 19/67] staging: most: sound: add sanity check for function argument Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 20/67] staging: bcm2835-audio: Replace unsafe strcpy() with strscpy() Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 21/67] net: ipa: avoid field overflow Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 22/67] brcmfmac: Add DMI nvram filename quirk for Predia Basic tablet Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 23/67] brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tablet Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 24/67] wilc1000: Fix use of void pointer as a wrong struct type Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 25/67] drm/hisilicon: Fix use-after-free Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 26/67] udlfb: Fix memory leak in dlfb_usb_probe Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 27/67] JFS: more checks for invalid superblock Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 28/67] crypto: tcrypt - avoid signed overflow in byte count Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 29/67] fs: make unlazy_walk() error handling consistent Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 30/67] sched/core: Allow try_invoke_on_locked_down_task() with irqs disabled Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 31/67] drm/amdgpu: Add check to prevent IH overflow Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 32/67] PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 33/67] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 34/67] ALSA: usb-audio: Add support for Pioneer DJM-750 Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 35/67] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 36/67] drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_data Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49   ` Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 37/67] media: mceusb: sanity check for prescaler value Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 38/67] media: v4l2-ctrls.c: fix shift-out-of-bounds in std_validate Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 39/67] media: zr364xx: fix memory leaks in probe() Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 40/67] media: uvcvideo: Allow entities with no pads Sasha Levin
2021-02-24 12:49 ` [PATCH AUTOSEL 5.11 41/67] f2fs: handle unallocated section and zone on pinned/atgc Sasha Levin
2021-02-24 12:49   ` [f2fs-dev] " Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 42/67] f2fs: fix to set/clear I_LINKABLE under i_lock Sasha Levin
2021-02-24 12:50   ` [f2fs-dev] " Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 43/67] tomoyo: ignore data race while checking quota Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 44/67] nvme-core: add cancel tagset helpers Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 45/67] nvme-rdma: add clean action for failed reconnection Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 46/67] nvme-tcp: " Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 47/67] ALSA: usb-audio: Add DJM450 to Pioneer format quirk Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 48/67] ALSA: usb-audio: Add DJM-450 to the quirks table Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 49/67] smackfs: restrict bytes count in smackfs write functions Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 50/67] Drivers: hv: vmbus: Initialize memory to be sent to the host Sasha Levin
2021-02-24 13:16   ` Andrea Parri
2021-02-24 13:30     ` Andrea Parri
2021-02-26 17:05       ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 51/67] Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind() Sasha Levin
2021-02-24 13:17   ` Andrea Parri
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 52/67] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr() Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 53/67] btrfs: fix error handling in commit_fs_roots Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 54/67] btrfs: make btrfs_start_delalloc_root's nr argument a long Sasha Levin
2021-02-24 18:09   ` David Sterba
2021-03-04 22:24     ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 55/67] btrfs: only let one thread pre-flush delayed refs in commit Sasha Levin
2021-02-24 18:08   ` David Sterba
2021-03-04 22:24     ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 56/67] drm/amdgpu: enable only one high prio compute queue Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 57/67] perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[] Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 58/67] ASoC: Intel: sof-sdw: indent and add quirks consistently Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 59/67] ASoC: Intel: sof_sdw: detect DMIC number based on mach params Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 60/67] erofs: fix shift-out-of-bounds of blkszbits Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 61/67] parisc: Bump 64-bit IRQ stack size to 64 KB Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 62/67] xen-blkback: fix error handling in xen_blkbk_map() Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 63/67] sched/features: Fix hrtick reprogramming Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 64/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 65/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 66/67] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet Sasha Levin
2021-02-24 12:50   ` Sasha Levin
2021-02-24 12:50 ` [PATCH AUTOSEL 5.11 67/67] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet Sasha Levin
2021-02-24 12:50   ` Sasha Levin

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.