[RFC V3 net-next 0/3] net: stmmac: implement clocks management

[RFC V3 net-next 0/3] net: stmmac: implement clocks management

[Joakim Zhang]

This patch set tries to implement clocks management, and takes i.MX platform as an example.

---
ChangeLogs:
V1->V2:
	* change to pm runtime mechanism.
	* rename function: _enable() -> _config()
	* take MDIO bus into account, it needs clocks when interface
	is closed.
	* reverse Christmass tree.
V2->V3:
	* slightly simple the code according to Andrew's suggesstion
	and also add tag: Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Joakim Zhang (3):
  net: stmmac: add clocks management for gmac driver
  net: stmmac: add platform level clocks management
  net: stmmac: dwmac-imx: add platform level clocks management for i.MX

 .../net/ethernet/stmicro/stmmac/dwmac-imx.c   |  60 ++++++----
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |   1 +
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  85 ++++++++++++--
 .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 111 ++++++++++++++----
 .../ethernet/stmicro/stmmac/stmmac_platform.c |  24 +++-
 include/linux/stmmac.h                        |   1 +
 6 files changed, 221 insertions(+), 61 deletions(-)

-- 
2.17.1

[RFC V3 net-next 1/3] net: stmmac: add clocks management for gmac driver

[Joakim Zhang]

This patch intends to add clocks management for stmmac driver:

If CONFIG_PM enabled:
1. Keep clocks disabled after driver probed.
2. Enable clocks when up the net device, and disable clocks when down
the net device.

If CONFIG_PM disabled:
Keep clocks always enabled after driver probed.

Note:
1. It is fine for ethtool, since the way of implementing ethtool_ops::begin
in stmmac is only can be accessed when interface is enabled, so the clocks
are ticked.
2. The MDIO bus has a different life cycle to the MAC, need ensure
clocks are enabled when _mdio_read/write() need clocks, because these
functions can be called while the interface it not opened.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |   1 +
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  75 ++++++++++--
 .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 111 ++++++++++++++----
 .../ethernet/stmicro/stmmac/stmmac_platform.c |  24 +++-
 4 files changed, 174 insertions(+), 37 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index e553b9a1f785..10e8ae8e2d58 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -272,6 +272,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv);
 bool stmmac_eee_init(struct stmmac_priv *priv);
 int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
 int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
 
 #if IS_ENABLED(CONFIG_STMMAC_SELFTESTS)
 void stmmac_selftest_run(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 26b971cd4da5..b4bc1c2104df 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -28,6 +28,7 @@
 #include <linux/if_vlan.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/prefetch.h>
 #include <linux/pinctrl/consumer.h>
 #ifdef CONFIG_DEBUG_FS
@@ -113,6 +114,28 @@ static void stmmac_exit_fs(struct net_device *dev);
 
 #define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC))
 
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
+{
+	int ret = 0;
+
+	if (enabled) {
+		ret = clk_prepare_enable(priv->plat->stmmac_clk);
+		if (ret)
+			return ret;
+		ret = clk_prepare_enable(priv->plat->pclk);
+		if (ret) {
+			clk_disable_unprepare(priv->plat->stmmac_clk);
+			return ret;
+		}
+	} else {
+		clk_disable_unprepare(priv->plat->stmmac_clk);
+		clk_disable_unprepare(priv->plat->pclk);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmmac_bus_clks_config);
+
 /**
  * stmmac_verify_args - verify the driver parameters.
  * Description: it checks the driver parameters and set a default in case of
@@ -2800,6 +2823,12 @@ static int stmmac_open(struct net_device *dev)
 	u32 chan;
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI &&
 	    priv->hw->xpcs == NULL) {
@@ -2808,7 +2837,7 @@ static int stmmac_open(struct net_device *dev)
 			netdev_err(priv->dev,
 				   "%s: Cannot attach to PHY (error: %d)\n",
 				   __func__, ret);
-			return ret;
+			goto init_phy_error;
 		}
 	}
 
@@ -2924,6 +2953,8 @@ static int stmmac_open(struct net_device *dev)
 	free_dma_desc_resources(priv);
 dma_desc_error:
 	phylink_disconnect_phy(priv->phylink);
+init_phy_error:
+	pm_runtime_put(priv->device);
 	return ret;
 }
 
@@ -2974,6 +3005,8 @@ static int stmmac_release(struct net_device *dev)
 
 	stmmac_release_ptp(priv);
 
+	pm_runtime_put(priv->device);
+
 	return 0;
 }
 
@@ -4624,6 +4657,12 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
 	bool is_double = false;
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	if (be16_to_cpu(proto) == ETH_P_8021AD)
 		is_double = true;
 
@@ -4632,10 +4671,15 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
 	if (priv->hw->num_vlan) {
 		ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 		if (ret)
-			return ret;
+			goto del_vlan_error;
 	}
 
-	return stmmac_vlan_update(priv, is_double);
+	ret = stmmac_vlan_update(priv, is_double);
+
+del_vlan_error:
+	pm_runtime_put(priv->device);
+
+	return ret;
 }
 
 static const struct net_device_ops stmmac_netdev_ops = {
@@ -5074,6 +5118,10 @@ int stmmac_dvr_probe(struct device *device,
 
 	stmmac_check_pcs_mode(priv);
 
+	pm_runtime_get_noresume(device);
+	pm_runtime_set_active(device);
+	pm_runtime_enable(device);
+
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI) {
 		/* MDIO bus Registration */
@@ -5111,6 +5159,11 @@ int stmmac_dvr_probe(struct device *device,
 	stmmac_init_fs(ndev);
 #endif
 
+	/* Let pm_runtime_put() disable the clocks.
+	 * If CONFIG_PM is not enabled, the clocks will stay powered.
+	 */
+	pm_runtime_put(device);
+
 	return ret;
 
 error_serdes_powerup:
@@ -5125,6 +5178,7 @@ int stmmac_dvr_probe(struct device *device,
 	stmmac_napi_del(ndev);
 error_hw_init:
 	destroy_workqueue(priv->wq);
+	stmmac_bus_clks_config(priv, false);
 
 	return ret;
 }
@@ -5157,8 +5211,8 @@ int stmmac_dvr_remove(struct device *dev)
 	phylink_destroy(priv->phylink);
 	if (priv->plat->stmmac_rst)
 		reset_control_assert(priv->plat->stmmac_rst);
-	clk_disable_unprepare(priv->plat->pclk);
-	clk_disable_unprepare(priv->plat->stmmac_clk);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
@@ -5181,6 +5235,7 @@ int stmmac_suspend(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	u32 chan;
+	int ret;
 
 	if (!ndev || !netif_running(ndev))
 		return 0;
@@ -5224,8 +5279,9 @@ int stmmac_suspend(struct device *dev)
 		pinctrl_pm_select_sleep_state(priv->device);
 		/* Disable clock in case of PWM is off */
 		clk_disable_unprepare(priv->plat->clk_ptp_ref);
-		clk_disable_unprepare(priv->plat->pclk);
-		clk_disable_unprepare(priv->plat->stmmac_clk);
+		ret = pm_runtime_force_suspend(dev);
+		if (ret)
+			return ret;
 	}
 	mutex_unlock(&priv->lock);
 
@@ -5289,8 +5345,9 @@ int stmmac_resume(struct device *dev)
 	} else {
 		pinctrl_pm_select_default_state(priv->device);
 		/* enable the clk previously disabled */
-		clk_prepare_enable(priv->plat->stmmac_clk);
-		clk_prepare_enable(priv->plat->pclk);
+		ret = pm_runtime_force_resume(dev);
+		if (ret)
+			return ret;
 		if (priv->plat->clk_ptp_ref)
 			clk_prepare_enable(priv->plat->clk_ptp_ref);
 		/* reset the phy so that it's ready */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index d64116e0543e..b750074f8f9c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -15,6 +15,7 @@
 #include <linux/iopoll.h>
 #include <linux/mii.h>
 #include <linux/of_mdio.h>
+#include <linux/pm_runtime.h>
 #include <linux/phy.h>
 #include <linux/property.h>
 #include <linux/slab.h>
@@ -87,21 +88,29 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	u32 tmp, addr, value = MII_XGMAC_BUSY;
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
-			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
-		return -EBUSY;
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+		ret = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	if (phyreg & MII_ADDR_C45) {
 		phyreg &= ~MII_ADDR_C45;
 
 		ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	} else {
 		ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 
 		value |= MII_XGMAC_SADDR;
 	}
@@ -112,8 +121,10 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
-			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
-		return -EBUSY;
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+		ret = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	/* Set the MII address register to read */
 	writel(addr, priv->ioaddr + mii_address);
@@ -121,11 +132,18 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
-			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
-		return -EBUSY;
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+		ret = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	/* Read the data from the MII data register */
-	return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
+	ret = (int)readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
+
+err_disable_clks:
+	pm_runtime_put(priv->device);
+
+	return ret;
 }
 
 static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
@@ -138,21 +156,29 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
 	u32 addr, tmp, value = MII_XGMAC_BUSY;
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
-			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
-		return -EBUSY;
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+		ret = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	if (phyreg & MII_ADDR_C45) {
 		phyreg &= ~MII_ADDR_C45;
 
 		ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	} else {
 		ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 
 		value |= MII_XGMAC_SADDR;
 	}
@@ -164,16 +190,23 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
 
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
-			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
-		return -EBUSY;
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+		ret = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	/* Set the MII address register to write */
 	writel(addr, priv->ioaddr + mii_address);
 	writel(value, priv->ioaddr + mii_data);
 
 	/* Wait until any existing MII operation is complete */
-	return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
-				  !(tmp & MII_XGMAC_BUSY), 100, 10000);
+	ret = readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+				 !(tmp & MII_XGMAC_BUSY), 100, 10000);
+
+err_disable_clks:
+	pm_runtime_put(priv->device);
+
+	return ret;
 }
 
 /**
@@ -196,6 +229,12 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	int data = 0;
 	u32 v;
 
+	data = pm_runtime_get_sync(priv->device);
+	if (data < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return data;
+	}
+
 	value |= (phyaddr << priv->hw->mii.addr_shift)
 		& priv->hw->mii.addr_mask;
 	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
@@ -216,19 +255,26 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	}
 
 	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-			       100, 10000))
-		return -EBUSY;
+			       100, 10000)) {
+		data = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	writel(data, priv->ioaddr + mii_data);
 	writel(value, priv->ioaddr + mii_address);
 
 	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-			       100, 10000))
-		return -EBUSY;
+			       100, 10000)) {
+		data = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	/* Read the data from the MII data register */
 	data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
 
+err_disable_clks:
+	pm_runtime_put(priv->device);
+
 	return data;
 }
 
@@ -247,10 +293,16 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
 	unsigned int mii_data = priv->hw->mii.data;
+	int ret, data = phydata;
 	u32 value = MII_BUSY;
-	int data = phydata;
 	u32 v;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	value |= (phyaddr << priv->hw->mii.addr_shift)
 		& priv->hw->mii.addr_mask;
 	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
@@ -275,16 +327,23 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
 
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-			       100, 10000))
-		return -EBUSY;
+			       100, 10000)) {
+		ret = -EBUSY;
+		goto err_disable_clks;
+	}
 
 	/* Set the MII address register to write */
 	writel(data, priv->ioaddr + mii_data);
 	writel(value, priv->ioaddr + mii_address);
 
 	/* Wait until any existing MII operation is complete */
-	return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-				  100, 10000);
+	ret = readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+				 100, 10000);
+
+err_disable_clks:
+	pm_runtime_put(priv->device);
+
+	return ret;
 }
 
 /**
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6dc9f10414e4..a70b0bc84b2a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -744,10 +744,30 @@ static int stmmac_pltfr_resume(struct device *dev)
 
 	return stmmac_resume(dev);
 }
+
+static int stmmac_runtime_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	stmmac_bus_clks_config(priv, false);
+
+	return 0;
+}
+
+static int stmmac_runtime_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	return stmmac_bus_clks_config(priv, true);
+}
 #endif /* CONFIG_PM_SLEEP */
 
-SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, stmmac_pltfr_suspend,
-				       stmmac_pltfr_resume);
+const struct dev_pm_ops stmmac_pltfr_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
+	SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
+};
 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
 
 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
-- 
2.17.1

[RFC V3 net-next 2/3] net: stmmac: add platform level clocks management

[Joakim Zhang]

This patch intends to add platform level clocks management. Some
platforms may have their own special clocks, they also need to be
managed dynamically. If you want to manage such clocks, please implement
clks_config callback.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++++++++
 include/linux/stmmac.h                            |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b4bc1c2104df..33b0783de270 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -127,9 +127,19 @@ int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
 			clk_disable_unprepare(priv->plat->stmmac_clk);
 			return ret;
 		}
+		if (priv->plat->clks_config) {
+			ret = priv->plat->clks_config(priv->plat->bsp_priv, enabled);
+			if (ret) {
+				clk_disable_unprepare(priv->plat->stmmac_clk);
+				clk_disable_unprepare(priv->plat->pclk);
+				return ret;
+			}
+		}
 	} else {
 		clk_disable_unprepare(priv->plat->stmmac_clk);
 		clk_disable_unprepare(priv->plat->pclk);
+		if (priv->plat->clks_config)
+			priv->plat->clks_config(priv->plat->bsp_priv, enabled);
 	}
 
 	return ret;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index a302982de2d7..5ab2a8138149 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -183,6 +183,7 @@ struct plat_stmmacenet_data {
 	int (*init)(struct platform_device *pdev, void *priv);
 	void (*exit)(struct platform_device *pdev, void *priv);
 	struct mac_device_info *(*setup)(void *priv);
+	int (*clks_config)(void *priv, bool enabled);
 	void *bsp_priv;
 	struct clk *stmmac_clk;
 	struct clk *pclk;
-- 
2.17.1

[RFC V3 net-next 3/3] net: stmmac: dwmac-imx: add platform level clocks management for i.MX

[Joakim Zhang]

Split clocks settings from init callback into clks_config callback,
which could support platform level clocks management.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-imx.c   | 60 +++++++++++--------
 1 file changed, 36 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index 223f69da7e95..c1a361305a5a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -90,6 +90,32 @@ imx8dxl_set_intf_mode(struct plat_stmmacenet_data *plat_dat)
 	return ret;
 }
 
+static int imx_dwmac_clks_config(void *priv, bool enabled)
+{
+	struct imx_priv_data *dwmac = priv;
+	int ret = 0;
+
+	if (enabled) {
+		ret = clk_prepare_enable(dwmac->clk_mem);
+		if (ret) {
+			dev_err(dwmac->dev, "mem clock enable failed\n");
+			return ret;
+		}
+
+		ret = clk_prepare_enable(dwmac->clk_tx);
+		if (ret) {
+			dev_err(dwmac->dev, "tx clock enable failed\n");
+			clk_disable_unprepare(dwmac->clk_mem);
+			return ret;
+		}
+	} else {
+		clk_disable_unprepare(dwmac->clk_tx);
+		clk_disable_unprepare(dwmac->clk_mem);
+	}
+
+	return ret;
+}
+
 static int imx_dwmac_init(struct platform_device *pdev, void *priv)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -98,39 +124,18 @@ static int imx_dwmac_init(struct platform_device *pdev, void *priv)
 
 	plat_dat = dwmac->plat_dat;
 
-	ret = clk_prepare_enable(dwmac->clk_mem);
-	if (ret) {
-		dev_err(&pdev->dev, "mem clock enable failed\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(dwmac->clk_tx);
-	if (ret) {
-		dev_err(&pdev->dev, "tx clock enable failed\n");
-		goto clk_tx_en_failed;
-	}
-
 	if (dwmac->ops->set_intf_mode) {
 		ret = dwmac->ops->set_intf_mode(plat_dat);
 		if (ret)
-			goto intf_mode_failed;
+			return ret;
 	}
 
 	return 0;
-
-intf_mode_failed:
-	clk_disable_unprepare(dwmac->clk_tx);
-clk_tx_en_failed:
-	clk_disable_unprepare(dwmac->clk_mem);
-	return ret;
 }
 
 static void imx_dwmac_exit(struct platform_device *pdev, void *priv)
 {
-	struct imx_priv_data *dwmac = priv;
-
-	clk_disable_unprepare(dwmac->clk_tx);
-	clk_disable_unprepare(dwmac->clk_mem);
+	/* nothing to do now */
 }
 
 static void imx_dwmac_fix_speed(void *priv, unsigned int speed)
@@ -249,10 +254,15 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 	plat_dat->addr64 = dwmac->ops->addr_width;
 	plat_dat->init = imx_dwmac_init;
 	plat_dat->exit = imx_dwmac_exit;
+	plat_dat->clks_config = imx_dwmac_clks_config;
 	plat_dat->fix_mac_speed = imx_dwmac_fix_speed;
 	plat_dat->bsp_priv = dwmac;
 	dwmac->plat_dat = plat_dat;
 
+	ret = imx_dwmac_clks_config(dwmac, true);
+	if (ret)
+		goto err_clks_config;
+
 	ret = imx_dwmac_init(pdev, dwmac);
 	if (ret)
 		goto err_dwmac_init;
@@ -263,9 +273,11 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_dwmac_init:
 err_drv_probe:
 	imx_dwmac_exit(pdev, plat_dat->bsp_priv);
+err_dwmac_init:
+	imx_dwmac_clks_config(dwmac, false);
+err_clks_config:
 err_parse_dt:
 err_match_data:
 	stmmac_remove_config_dt(pdev, plat_dat);
-- 
2.17.1