From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 27/56] drm/i915/adl_p: Add dedicated SAGV watermarks
Date: Thu, 11 Mar 2021 14:36:03 -0800 [thread overview]
Message-ID: <20210311223632.3191939-28-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210311223632.3191939-1-matthew.d.roper@intel.com>
XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms. However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.
Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 32 +++++++++++
drivers/gpu/drm/i915/i915_drv.h | 2 +
drivers/gpu/drm/i915/i915_reg.h | 59 ++++++++++++++------
drivers/gpu/drm/i915/intel_pm.c | 56 +++++++++++++++++--
4 files changed, 128 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index d032f1782bcb..f0a0390f8497 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -9243,6 +9243,38 @@ static void verify_wm_state(struct intel_crtc *crtc,
hw_wm_level->plane_res_l);
}
+ hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0;
+ sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0;
+
+ if (HAS_HW_SAGV_WM(dev_priv) &&
+ !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
+ drm_err(&dev_priv->drm,
+ "[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
+ plane->base.base.id, plane->base.name,
+ sw_wm_level->plane_en,
+ sw_wm_level->plane_res_b,
+ sw_wm_level->plane_res_l,
+ hw_wm_level->plane_en,
+ hw_wm_level->plane_res_b,
+ hw_wm_level->plane_res_l);
+ }
+
+ hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm;
+ sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm;
+
+ if (HAS_HW_SAGV_WM(dev_priv) &&
+ !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
+ drm_err(&dev_priv->drm,
+ "[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
+ plane->base.base.id, plane->base.name,
+ sw_wm_level->plane_en,
+ sw_wm_level->plane_res_b,
+ sw_wm_level->plane_res_l,
+ hw_wm_level->plane_en,
+ hw_wm_level->plane_res_b,
+ hw_wm_level->plane_res_l);
+ }
+
/* DDB */
hw_ddb_entry = &hw->ddb_y[plane->id];
sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane->id];
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b702e4f02ae7..10b99f9e380b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -582,6 +582,8 @@ i915_fence_timeout(const struct drm_i915_private *i915)
/* Amount of SAGV/QGV points, BSpec precisely defines this */
#define I915_NUM_QGV_POINTS 8
+#define HAS_HW_SAGV_WM(i915) ((DISPLAY_VER(i915) == 13) && !IS_DGFX(i915))
+
struct ddi_vbt_port_info {
/* Non-NULL if port present. */
const struct child_device_config *child;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6a48e046dedf..cdb2f7b136a9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6415,16 +6415,28 @@ enum {
/* Watermark register definitions for SKL */
#define _CUR_WM_A_0 0x70140
#define _CUR_WM_B_0 0x71140
+#define _CUR_WM_SAGV_A 0x70158
+#define _CUR_WM_SAGV_B 0x71158
+#define _CUR_WM_SAGV_TRANS_A 0x7015C
+#define _CUR_WM_SAGV_TRANS_B 0x7115C
+#define _CUR_WM_TRANS_A 0x70168
+#define _CUR_WM_TRANS_B 0x71168
#define _PLANE_WM_1_A_0 0x70240
#define _PLANE_WM_1_B_0 0x71240
#define _PLANE_WM_2_A_0 0x70340
#define _PLANE_WM_2_B_0 0x71340
-#define _PLANE_WM_TRANS_1_A_0 0x70268
-#define _PLANE_WM_TRANS_1_B_0 0x71268
-#define _PLANE_WM_TRANS_2_A_0 0x70368
-#define _PLANE_WM_TRANS_2_B_0 0x71368
-#define _CUR_WM_TRANS_A_0 0x70168
-#define _CUR_WM_TRANS_B_0 0x71168
+#define _PLANE_WM_SAGV_1_A 0x70258
+#define _PLANE_WM_SAGV_1_B 0x71258
+#define _PLANE_WM_SAGV_2_A 0x70358
+#define _PLANE_WM_SAGV_2_B 0x71358
+#define _PLANE_WM_SAGV_TRANS_1_A 0x7025C
+#define _PLANE_WM_SAGV_TRANS_1_B 0x7125C
+#define _PLANE_WM_SAGV_TRANS_2_A 0x7035C
+#define _PLANE_WM_SAGV_TRANS_2_B 0x7135C
+#define _PLANE_WM_TRANS_1_A 0x70268
+#define _PLANE_WM_TRANS_1_B 0x71268
+#define _PLANE_WM_TRANS_2_A 0x70368
+#define _PLANE_WM_TRANS_2_B 0x71368
#define PLANE_WM_EN (1 << 31)
#define PLANE_WM_IGNORE_LINES (1 << 30)
#define PLANE_WM_LINES_MASK REG_GENMASK(21, 14)
@@ -6432,19 +6444,32 @@ enum {
#define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0)
#define CUR_WM(pipe, level) _MMIO(_CUR_WM_0(pipe) + ((4) * (level)))
-#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A_0, _CUR_WM_TRANS_B_0)
-
+#define CUR_WM_SAGV(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_A, _CUR_WM_SAGV_B)
+#define CUR_WM_SAGV_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_TRANS_A, _CUR_WM_SAGV_TRANS_B)
+#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A, _CUR_WM_TRANS_B)
#define _PLANE_WM_1(pipe) _PIPE(pipe, _PLANE_WM_1_A_0, _PLANE_WM_1_B_0)
#define _PLANE_WM_2(pipe) _PIPE(pipe, _PLANE_WM_2_A_0, _PLANE_WM_2_B_0)
-#define _PLANE_WM_BASE(pipe, plane) \
- _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
-#define PLANE_WM(pipe, plane, level) \
- _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
-#define _PLANE_WM_TRANS_1(pipe) \
- _PIPE(pipe, _PLANE_WM_TRANS_1_A_0, _PLANE_WM_TRANS_1_B_0)
-#define _PLANE_WM_TRANS_2(pipe) \
- _PIPE(pipe, _PLANE_WM_TRANS_2_A_0, _PLANE_WM_TRANS_2_B_0)
-#define PLANE_WM_TRANS(pipe, plane) \
+#define _PLANE_WM_BASE(pipe, plane) \
+ _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
+#define PLANE_WM(pipe, plane, level) \
+ _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
+#define _PLANE_WM_SAGV_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_1_A, _PLANE_WM_SAGV_1_B)
+#define _PLANE_WM_SAGV_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_2_A, _PLANE_WM_SAGV_2_B)
+#define PLANE_WM_SAGV(pipe, plane) \
+ _MMIO(_PLANE(plane, _PLANE_WM_SAGV_1(pipe), _PLANE_WM_SAGV_2(pipe)))
+#define _PLANE_WM_SAGV_TRANS_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_TRANS_1_A, _PLANE_WM_SAGV_TRANS_1_B)
+#define _PLANE_WM_SAGV_TRANS_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_TRANS_2_A, _PLANE_WM_SAGV_TRANS_2_B)
+#define PLANE_WM_SAGV_TRANS(pipe, plane) \
+ _MMIO(_PLANE(plane, _PLANE_WM_SAGV_TRANS_1(pipe), _PLANE_WM_SAGV_TRANS_2(pipe)))
+#define _PLANE_WM_TRANS_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_TRANS_1_A, _PLANE_WM_TRANS_1_B)
+#define _PLANE_WM_TRANS_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_TRANS_2_A, _PLANE_WM_TRANS_2_B)
+#define PLANE_WM_TRANS(pipe, plane) \
_MMIO(_PLANE(plane, _PLANE_WM_TRANS_1(pipe), _PLANE_WM_TRANS_2(pipe)))
/* define the Watermark register on Ironlake */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 0bad9cc76505..0052630fd9dd 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2982,7 +2982,9 @@ static void intel_fixup_cur_wm_latency(struct drm_i915_private *dev_priv,
int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
{
/* how many WM levels are we expecting */
- if (DISPLAY_VER(dev_priv) >= 9)
+ if (HAS_HW_SAGV_WM(dev_priv))
+ return 5;
+ else if (DISPLAY_VER(dev_priv) >= 9)
return 7;
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
return 4;
@@ -3998,8 +4000,10 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state)
* latter from the plane commit hooks (especially in the legacy
* cursor case)
*/
- pipe_wm->use_sagv_wm = DISPLAY_VER(dev_priv) >= 12 &&
- intel_can_enable_sagv(dev_priv, new_bw_state);
+
+ pipe_wm->use_sagv_wm = !HAS_HW_SAGV_WM(dev_priv) &&
+ DISPLAY_VER(dev_priv) >= 12 &&
+ intel_can_enable_sagv(dev_priv, new_bw_state);
}
if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
@@ -5613,6 +5617,13 @@ void skl_write_plane_wm(struct intel_plane *plane,
skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
skl_plane_trans_wm(pipe_wm, plane_id));
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ skl_write_wm_level(dev_priv, PLANE_WM_SAGV(pipe, plane_id),
+ &wm->sagv.wm0);
+ skl_write_wm_level(dev_priv, PLANE_WM_SAGV_TRANS(pipe, plane_id),
+ &wm->sagv.trans_wm);
+ }
+
if (DISPLAY_VER(dev_priv) >= 11) {
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, plane_id), ddb_y);
@@ -5646,6 +5657,15 @@ void skl_write_cursor_wm(struct intel_plane *plane,
skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe),
skl_plane_trans_wm(pipe_wm, plane_id));
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
+
+ skl_write_wm_level(dev_priv, CUR_WM_SAGV(pipe),
+ &wm->sagv.wm0);
+ skl_write_wm_level(dev_priv, CUR_WM_SAGV_TRANS(pipe),
+ &wm->sagv.trans_wm);
+ }
+
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe), ddb);
}
@@ -6010,6 +6030,15 @@ static bool skl_plane_selected_wm_equals(struct intel_plane *plane,
return false;
}
+ if (HAS_HW_SAGV_WM(i915)) {
+ const struct skl_plane_wm *old_wm = &old_pipe_wm->planes[plane->id];
+ const struct skl_plane_wm *new_wm = &new_pipe_wm->planes[plane->id];
+
+ if (!skl_wm_level_equals(&old_wm->sagv.wm0, &new_wm->sagv.wm0) ||
+ !skl_wm_level_equals(&old_wm->sagv.trans_wm, &new_wm->sagv.trans_wm))
+ return false;
+ }
+
return skl_wm_level_equals(skl_plane_trans_wm(old_pipe_wm, plane->id),
skl_plane_trans_wm(new_pipe_wm, plane->id));
}
@@ -6228,7 +6257,26 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
skl_wm_level_from_reg_val(val, &wm->trans_wm);
- if (DISPLAY_VER(dev_priv) >= 12) {
+
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ if (plane_id != PLANE_CURSOR)
+ val = intel_uncore_read(&dev_priv->uncore,
+ PLANE_WM_SAGV(pipe, plane_id));
+ else
+ val = intel_uncore_read(&dev_priv->uncore,
+ CUR_WM_SAGV(pipe));
+
+ skl_wm_level_from_reg_val(val, &wm->sagv.wm0);
+
+ if (plane_id != PLANE_CURSOR)
+ val = intel_uncore_read(&dev_priv->uncore,
+ PLANE_WM_SAGV_TRANS(pipe, plane_id));
+ else
+ val = intel_uncore_read(&dev_priv->uncore,
+ CUR_WM_SAGV_TRANS(pipe));
+
+ skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm);
+ } else if (DISPLAY_VER(dev_priv) >= 12) {
wm->sagv.wm0 = wm->wm[0];
wm->sagv.trans_wm = wm->trans_wm;
}
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-11 22:37 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 22:35 [Intel-gfx] [PATCH 00/56] Introduce Alder Lake-P Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 01/56] drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGE Matt Roper
2021-03-12 16:50 ` Ville Syrjälä
2021-03-11 22:35 ` [Intel-gfx] [PATCH 02/56] drm/i915: Add DISPLAY_VER() Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 03/56] drm/i915/display: Eliminate most usage of INTEL_GEN() Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 04/56] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in intel_pm.c Matt Roper
2021-03-12 20:42 ` Srivatsa, Anusha
2021-03-12 20:46 ` Matt Roper
2021-03-17 18:02 ` Jani Nikula
2021-03-11 22:35 ` [Intel-gfx] [PATCH 05/56] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in i915_irq.c Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 06/56] drm/i915/display: Simplify GLK display version tests Matt Roper
2021-03-12 18:52 ` Ville Syrjälä
2021-03-11 22:35 ` [Intel-gfx] [PATCH 07/56] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 08/56] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-12 22:41 ` Srivatsa, Anusha
2021-03-11 22:35 ` [Intel-gfx] [PATCH 09/56] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 10/56] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 11/56] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 12/56] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 13/56] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 14/56] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 15/56] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 16/56] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-03-12 23:03 ` Srivatsa, Anusha
2021-03-11 22:35 ` [Intel-gfx] [PATCH 17/56] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 18/56] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 19/56] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 20/56] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 21/56] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 22/56] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 23/56] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 24/56] drm/i915/adl_p: Add PCI Devices IDs Matt Roper
2021-03-12 23:20 ` Srivatsa, Anusha
2021-03-17 18:04 ` Jani Nikula
2021-03-11 22:36 ` [Intel-gfx] [PATCH 25/56] drm/i915/adl_p: ADL_P device info enabling Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 26/56] drm/i915/adl_p: Add PCH support Matt Roper
2021-03-12 23:52 ` Srivatsa, Anusha
2021-03-11 22:36 ` Matt Roper [this message]
2021-03-11 22:36 ` [Intel-gfx] [PATCH 28/56] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-03-12 23:59 ` Srivatsa, Anusha
2021-03-11 22:36 ` [Intel-gfx] [PATCH 29/56] drm/i915/adl_p: Load DMC Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 30/56] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 31/56] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 32/56] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 33/56] drm/i915/adl_p: Handle TC cold Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 34/56] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 35/56] drm/i915/adl_p: Enable modular fia Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 36/56] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 37/56] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 38/56] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 39/56] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 40/56] drm/i915/adl_p: MBUS programming Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 41/56] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 42/56] drm/i915/adl_p: Add initial ADL_P Workarounds Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 43/56] drm/i915/adlp: Define GuC/HuC for Alderlake_P Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 44/56] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 45/56] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 46/56] drm/i915/adl_p: Add PLL Support Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 47/56] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 48/56] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 49/56] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 50/56] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 51/56] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 52/56] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 53/56] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 54/56] drm/i915/display/adl_p: Remove CCS support Matt Roper
2021-03-13 0:24 ` Srivatsa, Anusha
2021-03-11 22:36 ` [Intel-gfx] [PATCH 55/56] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-03-12 20:37 ` Dixit, Ashutosh
2021-03-11 22:36 ` [Intel-gfx] [PATCH 56/56] drm/i915/display/adl_p: Implement PSR changes Matt Roper
2021-03-13 19:49 ` Mun, Gwan-gyeong
2021-03-11 22:48 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Alder Lake-P Patchwork
2021-03-11 22:50 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-11 23:14 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210311223632.3191939-28-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.