From: Puranjay Mohan <puranjay12@gmail.com>
To: alexandru.ardelean@analog.com, jic23@kernel.org,
devicetree@vger.kernel.org, knaack.h@gmx.de,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Puranjay Mohan <puranjay12@gmail.com>
Subject: [PATCH 2/2] iio: temperature: add driver support for ti tmp117
Date: Sat, 20 Mar 2021 02:00:07 +0530 [thread overview]
Message-ID: <20210319203007.287802-3-puranjay12@gmail.com> (raw)
In-Reply-To: <20210319203007.287802-1-puranjay12@gmail.com>
TMP117 is a Digital temperature sensor with integrated NV memory.
Add support for tmp117 driver in iio subsystem.
Datasheet:-https://www.ti.com/lit/gpn/tmp117
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
---
drivers/iio/temperature/Kconfig | 11 ++
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/tmp117.c | 196 +++++++++++++++++++++++++++++++
3 files changed, 208 insertions(+)
create mode 100644 drivers/iio/temperature/tmp117.c
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index 3f11ed870..200efc880 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -86,6 +86,17 @@ config TMP007
This driver can also be built as a module. If so, the module will
be called tmp007.
+config TMP117
+ tristate "TMP117 Digital temperature sensor with integrated NV memory"
+ depends on I2C
+ help
+ If you say yes here you get support for the Texas Instruments
+ TMP117 Digital temperature sensor with integrated NV memory.
+
+ This driver can also be built as a module. If so, the module will
+ be called tmp117.
+
+
config TSYS01
tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
depends on I2C
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index e4e0bad5a..7f2a95ed2 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MLX90614) += mlx90614.o
obj-$(CONFIG_MLX90632) += mlx90632.o
obj-$(CONFIG_TMP006) += tmp006.o
obj-$(CONFIG_TMP007) += tmp007.o
+obj-$(CONFIG_TMP117) += tmp117.o
obj-$(CONFIG_TSYS01) += tsys01.o
obj-$(CONFIG_TSYS02D) += tsys02d.o
obj-$(CONFIG_LTC2983) += ltc2983.o
diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c
new file mode 100644
index 000000000..15cdf590e
--- /dev/null
+++ b/drivers/iio/temperature/tmp117.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tmp117.c - Digital temperature sensor with integrated NV memory
+ *
+ * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com>
+ *
+ * Driver for the Texas Instruments TMP117 Temperature Sensor
+ *
+ * (7-bit I2C slave address (0x48 - 0x4B), changeable via ADD pins)
+ *
+ * Note: This driver assumes that the sensor has been calibrated beforehand.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+#define TMP117_REG_TEMP 0x0
+#define TMP117_REG_CFGR 0x1
+#define TMP117_REG_HIGH_LIM 0x2
+#define TMP117_REG_LOW_LIM 0x3
+#define TMP117_REG_EEPROM_UL 0x4
+#define TMP117_REG_EEPROM1 0x5
+#define TMP117_REG_EEPROM2 0x6
+#define TMP117_REG_EEPROM3 0x7
+#define TMP117_REG_TEMP_OFFSET 0x7
+#define TMP117_REG_EEPROM4 0x8
+#define TMP117_REG_DEVICE_ID 0xF
+
+#define TMP117_RESOLUTION 78125 /* in tens of uCelsius*/
+#define TMP117_RESOLUTION_DIV 10000000
+
+#define TMP117_DEVICE_ID 0x0117
+
+struct tmp117_data {
+ struct i2c_client *client;
+ struct mutex lock;
+};
+
+static int tmp117_read_reg(struct tmp117_data *data, u8 reg)
+{
+
+ return i2c_smbus_read_word_swapped(data->client, reg);
+}
+
+static int tmp117_write_reg(struct tmp117_data *data, u8 reg, int val)
+{
+
+ return i2c_smbus_write_word_swapped(data->client, reg, val);
+}
+
+static int tmp117_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long mask)
+{
+ struct tmp117_data *data = iio_priv(indio_dev);
+ u16 tmp, off;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ tmp = tmp117_read_reg(data, TMP117_REG_TEMP);
+ *val = ((int16_t)tmp * (int32_t)TMP117_RESOLUTION) / 10000000;
+ *val2 = ((int16_t)tmp * (int32_t)TMP117_RESOLUTION) % 10000000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case IIO_CHAN_INFO_OFFSET:
+ off = tmp117_read_reg(data, TMP117_REG_TEMP_OFFSET);
+ *val = ((int16_t)off * (int32_t)TMP117_RESOLUTION) / 10000000;
+ *val2 = ((int16_t)off * (int32_t)TMP117_RESOLUTION) % 10000000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int tmp117_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int val,
+ int val2, long mask)
+{
+ struct tmp117_data *data = iio_priv(indio_dev);
+ u16 off;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OFFSET:
+ off = ((val * 10000000) + (val2 * 10))
+ / (int32_t)TMP117_RESOLUTION;
+ return tmp117_write_reg(data, TMP117_REG_TEMP_OFFSET, off);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_chan_spec tmp117_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ },
+};
+
+static const struct iio_info tmp117_info = {
+ .read_raw = tmp117_read_raw,
+ .write_raw = tmp117_write_raw,
+};
+
+static bool tmp117_identify(struct i2c_client *client)
+{
+ int dev_id;
+
+ dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID);
+ if (dev_id < 0)
+ return false;
+
+ return (dev_id == TMP117_DEVICE_ID);
+}
+
+static int tmp117_probe(struct i2c_client *client,
+ const struct i2c_device_id *tmp117_id)
+{
+ struct tmp117_data *data;
+ struct iio_dev *indio_dev;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EOPNOTSUPP;
+
+ if (!tmp117_identify(client)) {
+ dev_err(&client->dev, "TMP117 not found\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = "tmp117";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &tmp117_info;
+
+ indio_dev->channels = tmp117_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tmp117_channels);
+
+ return iio_device_register(indio_dev);
+}
+
+static int tmp117_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ return 0;
+}
+
+static const struct of_device_id tmp117_of_match[] = {
+ { .compatible = "ti,tmp117", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tmp117_of_match);
+
+static const struct i2c_device_id tmp117_id[] = {
+ { "tmp117", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tmp117_id);
+
+static struct i2c_driver tmp117_driver = {
+ .driver = {
+ .name = "tmp117",
+ .of_match_table = of_match_ptr(tmp117_of_match),
+ },
+ .probe = tmp117_probe,
+ .remove = tmp117_remove,
+ .id_table = tmp117_id,
+};
+module_i2c_driver(tmp117_driver);
+
+MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>");
+MODULE_DESCRIPTION("TI TMP117 Temperature sensor driver");
+MODULE_LICENSE("GPL");
--
2.30.1
next prev parent reply other threads:[~2021-03-19 20:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-19 20:30 [PATCH 0/2] iio: temperature: add support for tmp117 Puranjay Mohan
2021-03-19 20:30 ` [PATCH 1/2] dt-bindings: iio: temperature: Add DT bindings for TMP117 Puranjay Mohan
2021-03-19 21:49 ` Rob Herring
2021-03-19 20:30 ` Puranjay Mohan [this message]
2021-03-19 22:02 ` [PATCH 2/2] iio: temperature: add driver support for ti tmp117 Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210319203007.287802-3-puranjay12@gmail.com \
--to=puranjay12@gmail.com \
--cc=alexandru.ardelean@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.