All of lore.kernel.org
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Andy Lutomirski <luto@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	Fenghua Yu <fenghua.yu@intel.com>,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org
Subject: [PATCH V4 02/10] x86/fpu: Refactor arch_set_user_pkey_access() for PKS support
Date: Sun, 21 Mar 2021 22:30:12 -0700	[thread overview]
Message-ID: <20210322053020.2287058-3-ira.weiny@intel.com> (raw)
In-Reply-To: <20210322053020.2287058-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

Define a helper, update_pkey_val(), which will be used to support both
Protection Key User (PKU) and the new Protection Key for Supervisor
(PKS) in subsequent patches.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes from RFC V3:
	Per Dave Hansen
		Update and add comments per Dave's review
	Per Peter
		Correct attribution
---
 arch/x86/include/asm/pkeys.h |  2 ++
 arch/x86/kernel/fpu/xstate.c | 22 ++++------------------
 arch/x86/mm/pkeys.c          | 23 +++++++++++++++++++++++
 3 files changed, 29 insertions(+), 18 deletions(-)

diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h
index f9feba80894b..4526245b03e5 100644
--- a/arch/x86/include/asm/pkeys.h
+++ b/arch/x86/include/asm/pkeys.h
@@ -136,4 +136,6 @@ static inline int vma_pkey(struct vm_area_struct *vma)
 	return (vma->vm_flags & vma_pkey_mask) >> VM_PKEY_SHIFT;
 }
 
+u32 update_pkey_val(u32 pk_reg, int pkey, unsigned int flags);
+
 #endif /*_ASM_X86_PKEYS_H */
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index face29dab0e3..00251bdf759b 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -994,9 +994,7 @@ const void *get_xsave_field_ptr(int xfeature_nr)
 int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 		unsigned long init_val)
 {
-	u32 old_pkru;
-	int pkey_shift = (pkey * PKR_BITS_PER_PKEY);
-	u32 new_pkru_bits = 0;
+	u32 pkru;
 
 	/*
 	 * This check implies XSAVE support.  OSPKE only gets
@@ -1012,21 +1010,9 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 	 */
 	WARN_ON_ONCE(pkey >= arch_max_pkey());
 
-	/* Set the bits we need in PKRU:  */
-	if (init_val & PKEY_DISABLE_ACCESS)
-		new_pkru_bits |= PKR_AD_BIT;
-	if (init_val & PKEY_DISABLE_WRITE)
-		new_pkru_bits |= PKR_WD_BIT;
-
-	/* Shift the bits in to the correct place in PKRU for pkey: */
-	new_pkru_bits <<= pkey_shift;
-
-	/* Get old PKRU and mask off any old bits in place: */
-	old_pkru = read_pkru();
-	old_pkru &= ~((PKR_AD_BIT|PKR_WD_BIT) << pkey_shift);
-
-	/* Write old part along with new part: */
-	write_pkru(old_pkru | new_pkru_bits);
+	pkru = read_pkru();
+	pkru = update_pkey_val(pkru, pkey, init_val);
+	write_pkru(pkru);
 
 	return 0;
 }
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index f5efb4007e74..d1dfe743e79f 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -208,3 +208,26 @@ static __init int setup_init_pkru(char *opt)
 	return 1;
 }
 __setup("init_pkru=", setup_init_pkru);
+
+/*
+ * Replace disable bits for @pkey with values from @flags
+ *
+ * Kernel users use the same flags as user space:
+ *     PKEY_DISABLE_ACCESS
+ *     PKEY_DISABLE_WRITE
+ */
+u32 update_pkey_val(u32 pk_reg, int pkey, unsigned int flags)
+{
+	int pkey_shift = pkey * PKR_BITS_PER_PKEY;
+
+	/*  Mask out old bit values */
+	pk_reg &= ~(((1 << PKR_BITS_PER_PKEY) - 1) << pkey_shift);
+
+	/*  Or in new values */
+	if (flags & PKEY_DISABLE_ACCESS)
+		pk_reg |= PKR_AD_BIT << pkey_shift;
+	if (flags & PKEY_DISABLE_WRITE)
+		pk_reg |= PKR_WD_BIT << pkey_shift;
+
+	return pk_reg;
+}
-- 
2.28.0.rc0.12.gb6a658bd00c9


  parent reply	other threads:[~2021-03-22  5:31 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-22  5:30 [PATCH V4 00/10] PKS Add Protection Key Supervisor support ira.weiny
2021-03-22  5:30 ` [PATCH V4 01/10] x86/pkeys: Create pkeys_common.h ira.weiny
2021-03-22  5:30 ` ira.weiny [this message]
2021-03-22  5:30 ` [PATCH V4 03/10] x86/pks: Add additional PKEY helper macros ira.weiny
2021-03-22  5:30 ` [PATCH V4 04/10] x86/pks: Add PKS defines and Kconfig options ira.weiny
2021-03-22  5:30 ` [PATCH V4 05/10] x86/pks: Add PKS setup code ira.weiny
2021-03-22  5:30 ` [PATCH V4 06/10] x86/fault: Adjust WARN_ON for PKey fault ira.weiny
2021-03-22 16:05   ` Sean Christopherson
2021-03-22 22:44     ` Ira Weiny
2021-03-24 19:50   ` [PATCH V4.1] " ira.weiny
2021-03-22  5:30 ` [PATCH V4 07/10] x86/pks: Preserve the PKRS MSR on context switch ira.weiny
2021-03-30 19:25   ` Ira Weiny
2021-03-22  5:30 ` [PATCH V4 08/10] x86/entry: Preserve PKRS MSR across exceptions ira.weiny
2021-03-22  5:30 ` [PATCH V4 09/10] x86/pks: Add PKS kernel API ira.weiny
2021-03-24 19:53   ` [PATCH V4.1] " ira.weiny
2021-03-22  5:30 ` [PATCH V4 10/10] x86/pks: Add PKS test code ira.weiny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210322053020.2287058-3-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=fenghua.yu@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.