* [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-30 18:40 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-30 18:40 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, linux-arm-kernel,
arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetree
for you to fetch changes up to dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29 11:43:45 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
routers. He also fixes up the partitions for the Linksys EA9400 to
use the newly introduced parser compatible and sets the power LED to
its default state.
----------------------------------------------------------------
Rafał Miłecki (4):
ARM: dts: BCM5301X: fix "reg" formatting in /memory node
ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers
ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
ARM: dts: BCM5301X: Set Linksys EA9500 power LED
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++--
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++--
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++--
arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 5 +++++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++--
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++--
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ++--
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++--
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++--
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++--
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 5 +++++
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 ++--
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++--
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 9 ++++++--
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ++--
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ++--
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++--
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 26 +++++++++++++---------
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 4 ++--
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ++--
arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 4 ++--
25 files changed, 94 insertions(+), 55 deletions(-)
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-30 18:40 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-30 18:40 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, linux-arm-kernel,
arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetree
for you to fetch changes up to dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29 11:43:45 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
routers. He also fixes up the partitions for the Linksys EA9400 to
use the newly introduced parser compatible and sets the power LED to
its default state.
----------------------------------------------------------------
Rafał Miłecki (4):
ARM: dts: BCM5301X: fix "reg" formatting in /memory node
ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers
ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
ARM: dts: BCM5301X: Set Linksys EA9500 power LED
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++--
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++--
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++--
arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 5 +++++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++--
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++--
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ++--
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++--
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++--
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++--
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 5 +++++
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 ++--
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++--
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 9 ++++++--
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ++--
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ++--
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++--
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 26 +++++++++++++---------
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 4 ++--
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 9 ++++++--
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ++--
arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 4 ++--
25 files changed, 94 insertions(+), 55 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 2/3] Broadcom devicetree-arm64 changes for 5.13
@ 2021-03-30 18:40 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-30 18:40 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, Rob Herring,
linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetre-arm64
for you to fetch changes up to 9f01f5cdb548352418b34ce77db02a560fe2913b:
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr (2021-03-29 11:44:31 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
----------------------------------------------------------------
Rafał Miłecki (11):
arm64: dts: broadcom: bcm4908: describe USB PHY
arm64: dts: broadcom: bcm4908: describe Ethernet controller
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
arm64: dts: broadcom: bcm4908: describe firmware partitions
arm64: dts: broadcom: bcm4908: fix switch parent node name
dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
arm64: dts: broadcom: bcm4908: add Ethernet TX irq
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
.../devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 +
.../broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 107 +++++++++++-
.../bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 182 +++++++++++++++++++++
.../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 44 ++++-
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 47 +++++-
6 files changed, 375 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 2/3] Broadcom devicetree-arm64 changes for 5.13
@ 2021-03-30 18:40 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-30 18:40 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, Rob Herring,
linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetre-arm64
for you to fetch changes up to 9f01f5cdb548352418b34ce77db02a560fe2913b:
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr (2021-03-29 11:44:31 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
----------------------------------------------------------------
Rafał Miłecki (11):
arm64: dts: broadcom: bcm4908: describe USB PHY
arm64: dts: broadcom: bcm4908: describe Ethernet controller
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
arm64: dts: broadcom: bcm4908: describe firmware partitions
arm64: dts: broadcom: bcm4908: fix switch parent node name
dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
arm64: dts: broadcom: bcm4908: add Ethernet TX irq
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
.../devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 +
.../broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 107 +++++++++++-
.../bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 182 +++++++++++++++++++++
.../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 44 ++++-
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 47 +++++-
6 files changed, 375 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 3/3] Broadcom drivers changes for 5.13
@ 2021-03-30 18:40 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-30 18:40 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, Rob Herring,
linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/drivers
for you to fetch changes up to be6d99420306bb6b0abfff7a814564a614690db6:
soc: bcm: bcm-pmb: add BCM63138 SATA support (2021-03-25 14:24:43 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
changes for 5.13, please pull the following:
- Rafal updates the Broadcom PMB binding to support BCM63138 and updates
the code to support resetting the 63138 SATA controller
----------------------------------------------------------------
Rafał Miłecki (2):
dt-bindings: power: bcm-pmb: add BCM63138 binding
soc: bcm: bcm-pmb: add BCM63138 SATA support
.../devicetree/bindings/power/brcm,bcm-pmb.yaml | 1 +
drivers/soc/bcm/bcm63xx/bcm-pmb.c | 30 ++++++++++++++++++++++
include/dt-bindings/soc/bcm-pmb.h | 1 +
3 files changed, 32 insertions(+)
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 3/3] Broadcom drivers changes for 5.13
@ 2021-03-30 18:40 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-30 18:40 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, Rob Herring,
linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/drivers
for you to fetch changes up to be6d99420306bb6b0abfff7a814564a614690db6:
soc: bcm: bcm-pmb: add BCM63138 SATA support (2021-03-25 14:24:43 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
changes for 5.13, please pull the following:
- Rafal updates the Broadcom PMB binding to support BCM63138 and updates
the code to support resetting the 63138 SATA controller
----------------------------------------------------------------
Rafał Miłecki (2):
dt-bindings: power: bcm-pmb: add BCM63138 binding
soc: bcm: bcm-pmb: add BCM63138 SATA support
.../devicetree/bindings/power/brcm,bcm-pmb.yaml | 1 +
drivers/soc/bcm/bcm63xx/bcm-pmb.c | 30 ++++++++++++++++++++++
include/dt-bindings/soc/bcm-pmb.h | 1 +
3 files changed, 32 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 21:36 ` Rafał Miłecki
0 siblings, 0 replies; 20+ messages in thread
From: Rafał Miłecki @ 2021-03-31 21:36 UTC (permalink / raw)
To: Florian Fainelli
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 2021-03-30 20:40, Florian Fainelli wrote:
> The following changes since commit
> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git
> tags/arm-soc/for-5.13/devicetree
>
> for you to fetch changes up to
> dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>
> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29 11:43:45
> -0700)
This one seems a bit confusing.
Command:
git log arm-soc/for-5.13/devicetree
shows me only 2 of mentioned commits
Web UI:
https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
references dcb56d6 but opening it shows page with a warning:
"This commit does not belong to any branch on this repository, and may
belong to a fork outside of the repository."
My guess if you didn't push your local devicetree/next branch.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 21:36 ` Rafał Miłecki
0 siblings, 0 replies; 20+ messages in thread
From: Rafał Miłecki @ 2021-03-31 21:36 UTC (permalink / raw)
To: Florian Fainelli
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 2021-03-30 20:40, Florian Fainelli wrote:
> The following changes since commit
> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git
> tags/arm-soc/for-5.13/devicetree
>
> for you to fetch changes up to
> dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>
> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29 11:43:45
> -0700)
This one seems a bit confusing.
Command:
git log arm-soc/for-5.13/devicetree
shows me only 2 of mentioned commits
Web UI:
https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
references dcb56d6 but opening it shows page with a warning:
"This commit does not belong to any branch on this repository, and may
belong to a fork outside of the repository."
My guess if you didn't push your local devicetree/next branch.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 21:48 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-31 21:48 UTC (permalink / raw)
To: Rafał Miłecki
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 3/31/21 2:36 PM, Rafał Miłecki wrote:
> On 2021-03-30 20:40, Florian Fainelli wrote:
>> The following changes since commit
>> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>>
>> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>>
>> are available in the Git repository at:
>>
>> https://github.com/Broadcom/stblinux.git
>> tags/arm-soc/for-5.13/devicetree
>>
>> for you to fetch changes up to dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>>
>> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29
>> 11:43:45 -0700)
>
> This one seems a bit confusing.
>
> Command:
> git log arm-soc/for-5.13/devicetree
> shows me only 2 of mentioned commits
>
> Web UI:
> https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
>
> references dcb56d6 but opening it shows page with a warning:
> "This commit does not belong to any branch on this repository, and may
> belong to a fork outside of the repository."
>
> My guess if you didn't push your local devicetree/next branch.
I did and then overwrote it, it should show up correctly now.
--
Florian
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 21:48 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-31 21:48 UTC (permalink / raw)
To: Rafał Miłecki
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 3/31/21 2:36 PM, Rafał Miłecki wrote:
> On 2021-03-30 20:40, Florian Fainelli wrote:
>> The following changes since commit
>> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>>
>> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>>
>> are available in the Git repository at:
>>
>> https://github.com/Broadcom/stblinux.git
>> tags/arm-soc/for-5.13/devicetree
>>
>> for you to fetch changes up to dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>>
>> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29
>> 11:43:45 -0700)
>
> This one seems a bit confusing.
>
> Command:
> git log arm-soc/for-5.13/devicetree
> shows me only 2 of mentioned commits
>
> Web UI:
> https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
>
> references dcb56d6 but opening it shows page with a warning:
> "This commit does not belong to any branch on this repository, and may
> belong to a fork outside of the repository."
>
> My guess if you didn't push your local devicetree/next branch.
I did and then overwrote it, it should show up correctly now.
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 22:06 ` Rafał Miłecki
0 siblings, 0 replies; 20+ messages in thread
From: Rafał Miłecki @ 2021-03-31 22:06 UTC (permalink / raw)
To: Florian Fainelli
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 2021-03-31 23:48, Florian Fainelli wrote:
> On 3/31/21 2:36 PM, Rafał Miłecki wrote:
>> On 2021-03-30 20:40, Florian Fainelli wrote:
>>> The following changes since commit
>>> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>>>
>>> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>>>
>>> are available in the Git repository at:
>>>
>>> https://github.com/Broadcom/stblinux.git
>>> tags/arm-soc/for-5.13/devicetree
>>>
>>> for you to fetch changes up to
>>> dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>>>
>>> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29
>>> 11:43:45 -0700)
>>
>> This one seems a bit confusing.
>>
>> Command:
>> git log arm-soc/for-5.13/devicetree
>> shows me only 2 of mentioned commits
>>
>> Web UI:
>> https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
>>
>> references dcb56d6 but opening it shows page with a warning:
>> "This commit does not belong to any branch on this repository, and may
>> belong to a fork outside of the repository."
>>
>> My guess if you didn't push your local devicetree/next branch.
>
> I did and then overwrote it, it should show up correctly now.
I think you just pushed drivers/next instead of devicetree/next.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 22:06 ` Rafał Miłecki
0 siblings, 0 replies; 20+ messages in thread
From: Rafał Miłecki @ 2021-03-31 22:06 UTC (permalink / raw)
To: Florian Fainelli
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 2021-03-31 23:48, Florian Fainelli wrote:
> On 3/31/21 2:36 PM, Rafał Miłecki wrote:
>> On 2021-03-30 20:40, Florian Fainelli wrote:
>>> The following changes since commit
>>> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>>>
>>> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>>>
>>> are available in the Git repository at:
>>>
>>> https://github.com/Broadcom/stblinux.git
>>> tags/arm-soc/for-5.13/devicetree
>>>
>>> for you to fetch changes up to
>>> dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>>>
>>> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29
>>> 11:43:45 -0700)
>>
>> This one seems a bit confusing.
>>
>> Command:
>> git log arm-soc/for-5.13/devicetree
>> shows me only 2 of mentioned commits
>>
>> Web UI:
>> https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
>>
>> references dcb56d6 but opening it shows page with a warning:
>> "This commit does not belong to any branch on this repository, and may
>> belong to a fork outside of the repository."
>>
>> My guess if you didn't push your local devicetree/next branch.
>
> I did and then overwrote it, it should show up correctly now.
I think you just pushed drivers/next instead of devicetree/next.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 22:08 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-31 22:08 UTC (permalink / raw)
To: Rafał Miłecki
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 3/31/21 3:06 PM, Rafał Miłecki wrote:
> On 2021-03-31 23:48, Florian Fainelli wrote:
>> On 3/31/21 2:36 PM, Rafał Miłecki wrote:
>>> On 2021-03-30 20:40, Florian Fainelli wrote:
>>>> The following changes since commit
>>>> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>>>>
>>>> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>> https://github.com/Broadcom/stblinux.git
>>>> tags/arm-soc/for-5.13/devicetree
>>>>
>>>> for you to fetch changes up to
>>>> dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>>>>
>>>> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29
>>>> 11:43:45 -0700)
>>>
>>> This one seems a bit confusing.
>>>
>>> Command:
>>> git log arm-soc/for-5.13/devicetree
>>> shows me only 2 of mentioned commits
>>>
>>> Web UI:
>>> https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
>>>
>>>
>>> references dcb56d6 but opening it shows page with a warning:
>>> "This commit does not belong to any branch on this repository, and may
>>> belong to a fork outside of the repository."
>>>
>>> My guess if you didn't push your local devicetree/next branch.
>>
>> I did and then overwrote it, it should show up correctly now.
>
> I think you just pushed drivers/next instead of devicetree/next.
Humpf, yes, now fixed.
--
Florian
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-03-31 22:08 ` Florian Fainelli
0 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2021-03-31 22:08 UTC (permalink / raw)
To: Rafał Miłecki
Cc: soc, linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
On 3/31/21 3:06 PM, Rafał Miłecki wrote:
> On 2021-03-31 23:48, Florian Fainelli wrote:
>> On 3/31/21 2:36 PM, Rafał Miłecki wrote:
>>> On 2021-03-30 20:40, Florian Fainelli wrote:
>>>> The following changes since commit
>>>> fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>>>>
>>>> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>> https://github.com/Broadcom/stblinux.git
>>>> tags/arm-soc/for-5.13/devicetree
>>>>
>>>> for you to fetch changes up to
>>>> dcb56d61d5a8acca0a357cc603397bc0272ce4cb:
>>>>
>>>> ARM: dts: BCM5301X: Set Linksys EA9500 power LED (2021-03-29
>>>> 11:43:45 -0700)
>>>
>>> This one seems a bit confusing.
>>>
>>> Command:
>>> git log arm-soc/for-5.13/devicetree
>>> shows me only 2 of mentioned commits
>>>
>>> Web UI:
>>> https://github.com/Broadcom/stblinux/releases/tag/arm-soc%2Ffor-5.13%2Fdevicetree
>>>
>>>
>>> references dcb56d6 but opening it shows page with a warning:
>>> "This commit does not belong to any branch on this repository, and may
>>> belong to a fork outside of the repository."
>>>
>>> My guess if you didn't push your local devicetree/next branch.
>>
>> I did and then overwrote it, it should show up correctly now.
>
> I think you just pushed drivers/next instead of devicetree/next.
Humpf, yes, now fixed.
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 3/3] Broadcom drivers changes for 5.13
@ 2021-04-01 19:24 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2021-04-01 19:24 UTC (permalink / raw)
To: soc, Florian Fainelli
Cc: Arnd Bergmann, khilman, linux-arm-kernel, olof,
bcm-kernel-feedback-list, Rafał Miłecki, Rob Herring
From: Arnd Bergmann <arnd@arndb.de>
On Tue, 30 Mar 2021 11:40:06 -0700, Florian Fainelli wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/drivers
>
> [...]
Merged into arm/drivers, thanks!
merge commit: e9396d6b3864d235c57733ccb4902834eb8313a8
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 3/3] Broadcom drivers changes for 5.13
@ 2021-04-01 19:24 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2021-04-01 19:24 UTC (permalink / raw)
To: soc, Florian Fainelli
Cc: Arnd Bergmann, khilman, linux-arm-kernel, olof,
bcm-kernel-feedback-list, Rafał Miłecki, Rob Herring
From: Arnd Bergmann <arnd@arndb.de>
On Tue, 30 Mar 2021 11:40:06 -0700, Florian Fainelli wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/drivers
>
> [...]
Merged into arm/drivers, thanks!
merge commit: e9396d6b3864d235c57733ccb4902834eb8313a8
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-04-01 20:15 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2021-04-01 20:15 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, linux-arm-kernel, khilman,
bcm-kernel-feedback-list, olof, Rafał Miłecki
From: Arnd Bergmann <arnd@arndb.de>
On Tue, 30 Mar 2021 11:40:04 -0700, Florian Fainelli wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetree
>
> [...]
Merged into arm/dt, thanks!
merge commit: 498adc8623c237d9f87f4a0582393e0d69504bae
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/3] Broadcom devicetree changes for 5.13
@ 2021-04-01 20:15 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2021-04-01 20:15 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, linux-arm-kernel, khilman,
bcm-kernel-feedback-list, olof, Rafał Miłecki
From: Arnd Bergmann <arnd@arndb.de>
On Tue, 30 Mar 2021 11:40:04 -0700, Florian Fainelli wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetree
>
> [...]
Merged into arm/dt, thanks!
merge commit: 498adc8623c237d9f87f4a0582393e0d69504bae
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 2/3] Broadcom devicetree-arm64 changes for 5.13
@ 2021-04-01 20:15 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2021-04-01 20:15 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, Rob Herring, linux-arm-kernel, khilman,
bcm-kernel-feedback-list, olof, Rafał Miłecki
From: Arnd Bergmann <arnd@arndb.de>
On Tue, 30 Mar 2021 11:40:05 -0700, Florian Fainelli wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetre-arm64
>
> [...]
Merged into arm/dt, thanks!
merge commit: 3b73ea6c8069a616be468d00c7ba6148bf82dad9
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 2/3] Broadcom devicetree-arm64 changes for 5.13
@ 2021-04-01 20:15 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2021-04-01 20:15 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, Rob Herring, linux-arm-kernel, khilman,
bcm-kernel-feedback-list, olof, Rafał Miłecki
From: Arnd Bergmann <arnd@arndb.de>
On Tue, 30 Mar 2021 11:40:05 -0700, Florian Fainelli wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.13/devicetre-arm64
>
> [...]
Merged into arm/dt, thanks!
merge commit: 3b73ea6c8069a616be468d00c7ba6148bf82dad9
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2021-04-01 20:18 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-30 18:40 [GIT PULL 1/3] Broadcom devicetree changes for 5.13 Florian Fainelli
2021-03-30 18:40 ` Florian Fainelli
2021-03-30 18:40 ` [GIT PULL 2/3] Broadcom devicetree-arm64 " Florian Fainelli
2021-03-30 18:40 ` Florian Fainelli
2021-04-01 20:15 ` Arnd Bergmann
2021-04-01 20:15 ` Arnd Bergmann
2021-03-30 18:40 ` [GIT PULL 3/3] Broadcom drivers " Florian Fainelli
2021-03-30 18:40 ` Florian Fainelli
2021-04-01 19:24 ` Arnd Bergmann
2021-04-01 19:24 ` Arnd Bergmann
2021-03-31 21:36 ` [GIT PULL 1/3] Broadcom devicetree " Rafał Miłecki
2021-03-31 21:36 ` Rafał Miłecki
2021-03-31 21:48 ` Florian Fainelli
2021-03-31 21:48 ` Florian Fainelli
2021-03-31 22:06 ` Rafał Miłecki
2021-03-31 22:06 ` Rafał Miłecki
2021-03-31 22:08 ` Florian Fainelli
2021-03-31 22:08 ` Florian Fainelli
2021-04-01 20:15 ` Arnd Bergmann
2021-04-01 20:15 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.