All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris von Recklinghausen <crecklin@redhat.com>
To: ardb@kernel.org, simo@redhat.com, rafael@kernel.org,
	decui@microsoft.com, linux-pm@vger.kernel.org,
	linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/1] use crc32 instead of md5 for hibernation e820 integrity check
Date: Wed,  7 Apr 2021 06:04:21 -0400	[thread overview]
Message-ID: <20210407100421.27542-1-crecklin@redhat.com> (raw)

Suspend fails on a system in fips mode because md5 is used for the e820
integrity check and is not available. Use crc32 instead.

Prior to this patch, MD5 is used only to create a digest to ensure integrity of
the region, no actual encryption is done. This patch set changes the integrity
check to use crc32 instead of md5 since crc32 is available in both FIPS and
non-FIPS modes.

Fixes: 62a03defeabd ("PM / hibernate: Verify the consistent of e820 memory map
       by md5 digest")

Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
---
v1 -> v2
   bump up RESTORE_MAGIC
v2 -> v3
   move embelishment from cover letter to commit comments (no code change)

 arch/x86/power/hibernate.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/arch/x86/power/hibernate.c b/arch/x86/power/hibernate.c
index cd3914fc9f3d..b56172553275 100644
--- a/arch/x86/power/hibernate.c
+++ b/arch/x86/power/hibernate.c
@@ -55,31 +55,31 @@ int pfn_is_nosave(unsigned long pfn)
 }
 
 
-#define MD5_DIGEST_SIZE 16
+#define CRC32_DIGEST_SIZE 16
 
 struct restore_data_record {
 	unsigned long jump_address;
 	unsigned long jump_address_phys;
 	unsigned long cr3;
 	unsigned long magic;
-	u8 e820_digest[MD5_DIGEST_SIZE];
+	u8 e820_digest[CRC32_DIGEST_SIZE];
 };
 
-#if IS_BUILTIN(CONFIG_CRYPTO_MD5)
+#if IS_BUILTIN(CONFIG_CRYPTO_CRC32)
 /**
- * get_e820_md5 - calculate md5 according to given e820 table
+ * get_e820_crc32 - calculate crc32 according to given e820 table
  *
  * @table: the e820 table to be calculated
- * @buf: the md5 result to be stored to
+ * @buf: the crc32 result to be stored to
  */
-static int get_e820_md5(struct e820_table *table, void *buf)
+static int get_e820_crc32(struct e820_table *table, void *buf)
 {
 	struct crypto_shash *tfm;
 	struct shash_desc *desc;
 	int size;
 	int ret = 0;
 
-	tfm = crypto_alloc_shash("md5", 0, 0);
+	tfm = crypto_alloc_shash("crc32", 0, 0);
 	if (IS_ERR(tfm))
 		return -ENOMEM;
 
@@ -107,24 +107,24 @@ static int get_e820_md5(struct e820_table *table, void *buf)
 
 static int hibernation_e820_save(void *buf)
 {
-	return get_e820_md5(e820_table_firmware, buf);
+	return get_e820_crc32(e820_table_firmware, buf);
 }
 
 static bool hibernation_e820_mismatch(void *buf)
 {
 	int ret;
-	u8 result[MD5_DIGEST_SIZE];
+	u8 result[CRC32_DIGEST_SIZE];
 
-	memset(result, 0, MD5_DIGEST_SIZE);
+	memset(result, 0, CRC32_DIGEST_SIZE);
 	/* If there is no digest in suspend kernel, let it go. */
-	if (!memcmp(result, buf, MD5_DIGEST_SIZE))
+	if (!memcmp(result, buf, CRC32_DIGEST_SIZE))
 		return false;
 
-	ret = get_e820_md5(e820_table_firmware, result);
+	ret = get_e820_crc32(e820_table_firmware, result);
 	if (ret)
 		return true;
 
-	return memcmp(result, buf, MD5_DIGEST_SIZE) ? true : false;
+	return memcmp(result, buf, CRC32_DIGEST_SIZE) ? true : false;
 }
 #else
 static int hibernation_e820_save(void *buf)
@@ -134,15 +134,15 @@ static int hibernation_e820_save(void *buf)
 
 static bool hibernation_e820_mismatch(void *buf)
 {
-	/* If md5 is not builtin for restore kernel, let it go. */
+	/* If crc32 is not builtin for restore kernel, let it go. */
 	return false;
 }
 #endif
 
 #ifdef CONFIG_X86_64
-#define RESTORE_MAGIC	0x23456789ABCDEF01UL
+#define RESTORE_MAGIC	0x23456789ABCDEF02UL
 #else
-#define RESTORE_MAGIC	0x12345678UL
+#define RESTORE_MAGIC	0x12345679UL
 #endif
 
 /**
@@ -160,6 +160,9 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
 	rdr->jump_address = (unsigned long)restore_registers;
 	rdr->jump_address_phys = __pa_symbol(restore_registers);
 
+	/* crc32 digest size is 4 but digest buffer size is 16 so zero it all */
+	memset(rdr->e820_digest, 0, CRC32_DIGEST_SIZE);
+
 	/*
 	 * The restore code fixes up CR3 and CR4 in the following sequence:
 	 *
-- 
2.18.1


             reply	other threads:[~2021-04-07 10:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 10:04 Chris von Recklinghausen [this message]
2021-04-07 20:59 ` [PATCH v3 1/1] use crc32 instead of md5 for hibernation e820 integrity check Eric Biggers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210407100421.27542-1-crecklin@redhat.com \
    --to=crecklin@redhat.com \
    --cc=ardb@kernel.org \
    --cc=decui@microsoft.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=simo@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.