All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roberto Sassu <roberto.sassu@huawei.com>
To: <zohar@linux.ibm.com>, <mjg59@google.com>
Cc: <linux-integrity@vger.kernel.org>,
	<linux-security-module@vger.kernel.org>,
	<linux-fsdevel@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Roberto Sassu <roberto.sassu@huawei.com>
Subject: [PATCH v5 10/12] ima: Allow imasig requirement to be satisfied by EVM portable signatures
Date: Wed, 7 Apr 2021 12:52:50 +0200	[thread overview]
Message-ID: <20210407105252.30721-11-roberto.sassu@huawei.com> (raw)
In-Reply-To: <20210407105252.30721-1-roberto.sassu@huawei.com>

System administrators can require that all accessed files have a signature
by specifying appraise_type=imasig in a policy rule.

Currently, IMA signatures satisfy this requirement. Appended signatures may
also satisfy this requirement, but are not applicable as IMA signatures.
IMA/appended signatures ensure data source authentication for file content
and prevent any change. EVM signatures instead ensure data source
authentication for file metadata. Given that the digest or signature of the
file content must be included in the metadata, EVM signatures provide the
same file data guarantees of IMA signatures, as well as providing file
metadata guarantees.

This patch lets systems protected with EVM signatures pass appraisal
verification if the appraise_type=imasig requirement is specified in the
policy. This facilitates deployment in the scenarios where only EVM
signatures are available.

The patch makes the following changes:

file xattr types:
security.ima: IMA_XATTR_DIGEST/IMA_XATTR_DIGEST_NG
security.evm: EVM_XATTR_PORTABLE_DIGSIG

execve(), mmap(), open() behavior (with appraise_type=imasig):
before: denied (file without IMA signature, imasig requirement not met)
after: allowed (file with EVM portable signature, imasig requirement met)

open(O_WRONLY) behavior (without appraise_type=imasig):
before: allowed (file without IMA signature, not immutable)
after: denied (file with EVM portable signature, immutable)

In addition, similarly to IMA signatures, this patch temporarily allows
new files without or with incomplete metadata to be opened so that content
can be written.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
---
 security/integrity/ima/ima_appraise.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
index 24d59893aab0..538ccbf972c8 100644
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -242,12 +242,16 @@ static int xattr_verify(enum ima_hooks func, struct integrity_iint_cache *iint,
 		hash_start = 1;
 		fallthrough;
 	case IMA_XATTR_DIGEST:
-		if (iint->flags & IMA_DIGSIG_REQUIRED) {
-			*cause = "IMA-signature-required";
-			*status = INTEGRITY_FAIL;
-			break;
+		if (*status != INTEGRITY_PASS_IMMUTABLE) {
+			if (iint->flags & IMA_DIGSIG_REQUIRED) {
+				*cause = "IMA-signature-required";
+				*status = INTEGRITY_FAIL;
+				break;
+			}
+			clear_bit(IMA_DIGSIG, &iint->atomic_flags);
+		} else {
+			set_bit(IMA_DIGSIG, &iint->atomic_flags);
 		}
-		clear_bit(IMA_DIGSIG, &iint->atomic_flags);
 		if (xattr_len - sizeof(xattr_value->type) - hash_start >=
 				iint->ima_hash->length)
 			/*
@@ -417,6 +421,7 @@ int ima_appraise_measurement(enum ima_hooks func,
 		cause = "missing-HMAC";
 		goto out;
 	case INTEGRITY_FAIL_IMMUTABLE:
+		set_bit(IMA_DIGSIG, &iint->atomic_flags);
 		fallthrough;
 	case INTEGRITY_FAIL:		/* Invalid HMAC/signature. */
 		cause = "invalid-HMAC";
@@ -461,9 +466,12 @@ int ima_appraise_measurement(enum ima_hooks func,
 				status = INTEGRITY_PASS;
 		}
 
-		/* Permit new files with file signatures, but without data. */
+		/*
+		 * Permit new files with file/EVM portable signatures, but
+		 * without data.
+		 */
 		if (inode->i_size == 0 && iint->flags & IMA_NEW_FILE &&
-		    xattr_value && xattr_value->type == EVM_IMA_XATTR_DIGSIG) {
+		    test_bit(IMA_DIGSIG, &iint->atomic_flags)) {
 			status = INTEGRITY_PASS;
 		}
 
@@ -595,6 +603,8 @@ void ima_inode_post_setxattr(struct dentry *dentry, const char *xattr_name,
 				   xattr_value_len);
 	if (result == 1)
 		digsig = (xvalue->type == EVM_IMA_XATTR_DIGSIG);
+	if (!strcmp(xattr_name, XATTR_NAME_EVM) && xattr_value_len > 0)
+		digsig = (xvalue->type == EVM_XATTR_PORTABLE_DIGSIG);
 	if (result == 1 || evm_status_revalidate(xattr_name))
 		ima_reset_appraise_flags(d_backing_inode(dentry), digsig);
 }
-- 
2.26.2


  parent reply	other threads:[~2021-04-07 10:55 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 10:52 [PATCH v5 00/12] evm: Improve usability of portable signatures Roberto Sassu
2021-04-07 10:52 ` [PATCH v5 01/12] evm: Execute evm_inode_init_security() only when an HMAC key is loaded Roberto Sassu
2021-04-07 10:52 ` [PATCH v5 02/12] evm: Load EVM key in ima_load_x509() to avoid appraisal Roberto Sassu
2021-04-07 10:52 ` [PATCH v5 03/12] evm: Refuse EVM_ALLOW_METADATA_WRITES only if an HMAC key is loaded Roberto Sassu
2021-04-30 20:28   ` Mimi Zohar
2021-04-07 10:52 ` [PATCH v5 04/12] ima: Move ima_reset_appraise_flags() call to post hooks Roberto Sassu
2021-04-07 16:17   ` Casey Schaufler
2021-04-07 16:31     ` Roberto Sassu
2021-04-26 19:49     ` Mimi Zohar
2021-04-07 10:52 ` [PATCH v5 05/12] evm: Introduce evm_status_revalidate() Roberto Sassu
2021-04-07 10:52 ` [PATCH v5 06/12] evm: Ignore INTEGRITY_NOLABEL/INTEGRITY_NOXATTRS if conditions are safe Roberto Sassu
2021-05-03  0:12   ` Mimi Zohar
2021-05-03  7:55     ` Roberto Sassu
2021-05-03 12:07       ` Mimi Zohar
2021-05-03 14:15       ` Roberto Sassu
2021-05-03 14:34         ` Mimi Zohar
2021-05-04 13:16           ` Roberto Sassu
2021-05-04 13:45             ` Mimi Zohar
2021-04-07 10:52 ` [PATCH v5 07/12] evm: Allow xattr/attr operations for portable signatures Roberto Sassu
2021-05-03  0:12   ` Mimi Zohar
2021-05-04 14:28     ` Roberto Sassu
2021-05-04 14:49       ` Mimi Zohar
2021-04-07 10:52 ` [PATCH v5 08/12] evm: Pass user namespace to set/remove xattr hooks Roberto Sassu
2021-04-07 12:06   ` Christian Brauner
2021-04-07 10:52 ` [PATCH v5 09/12] evm: Allow setxattr() and setattr() for unmodified metadata Roberto Sassu
2021-04-07 12:05   ` Christian Brauner
2021-04-07 15:23   ` kernel test robot
2021-04-07 15:23     ` kernel test robot
2021-04-07 18:14   ` kernel test robot
2021-04-07 18:14     ` kernel test robot
2021-04-07 19:28     ` [RESEND][PATCH " Roberto Sassu
2021-05-03 13:00   ` [PATCH " Mimi Zohar
2021-05-03 14:48     ` Roberto Sassu
2021-05-03 15:13       ` Mimi Zohar
2021-05-03 15:30         ` Roberto Sassu
2021-05-03 15:11     ` Roberto Sassu
2021-05-03 15:26       ` Mimi Zohar
2021-05-03 15:32         ` Roberto Sassu
2021-05-03 15:48           ` Mimi Zohar
2021-04-07 10:52 ` Roberto Sassu [this message]
2021-04-07 10:52 ` [PATCH v5 11/12] ima: Introduce template field evmsig and write to field sig as fallback Roberto Sassu
2021-04-07 10:52 ` [PATCH v5 12/12] ima: Don't remove security.ima if file must not be appraised Roberto Sassu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210407105252.30721-11-roberto.sassu@huawei.com \
    --to=roberto.sassu@huawei.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=mjg59@google.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.