From: Green Wan <green.wan@sifive.com>
To: u-boot@lists.denx.de
Subject: [PATCH v5 2/8] riscv: cpu: fu740: Add support for cpu fu740
Date: Thu, 8 Apr 2021 03:26:50 -0700 [thread overview]
Message-ID: <20210408102657.201027-3-green.wan@sifive.com> (raw)
In-Reply-To: <20210408102657.201027-1-green.wan@sifive.com>
Add SiFive fu740 cpu to support RISC-V arch
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
arch/riscv/Kconfig | 1 +
arch/riscv/cpu/fu740/Kconfig | 37 +++++++++++++++
arch/riscv/cpu/fu740/Makefile | 12 +++++
arch/riscv/cpu/fu740/cache.c | 55 +++++++++++++++++++++++
arch/riscv/cpu/fu740/cpu.c | 22 +++++++++
arch/riscv/cpu/fu740/dram.c | 38 ++++++++++++++++
arch/riscv/cpu/fu740/spl.c | 23 ++++++++++
arch/riscv/include/asm/arch-fu740/cache.h | 14 ++++++
arch/riscv/include/asm/arch-fu740/clk.h | 14 ++++++
arch/riscv/include/asm/arch-fu740/gpio.h | 38 ++++++++++++++++
arch/riscv/include/asm/arch-fu740/reset.h | 13 ++++++
arch/riscv/include/asm/arch-fu740/spl.h | 14 ++++++
arch/riscv/lib/sifive_clint.c | 1 -
13 files changed, 281 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/cpu/fu740/Kconfig
create mode 100644 arch/riscv/cpu/fu740/Makefile
create mode 100644 arch/riscv/cpu/fu740/cache.c
create mode 100644 arch/riscv/cpu/fu740/cpu.c
create mode 100644 arch/riscv/cpu/fu740/dram.c
create mode 100644 arch/riscv/cpu/fu740/spl.c
create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h
create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h
create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h
create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h
create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e8494c2a49..323c3587ae 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -61,6 +61,7 @@ source "board/sipeed/maix/Kconfig"
# platform-specific options below
source "arch/riscv/cpu/ax25/Kconfig"
source "arch/riscv/cpu/fu540/Kconfig"
+source "arch/riscv/cpu/fu740/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
# architecture-specific options below
diff --git a/arch/riscv/cpu/fu740/Kconfig b/arch/riscv/cpu/fu740/Kconfig
new file mode 100644
index 0000000000..689e54d569
--- /dev/null
+++ b/arch/riscv/cpu/fu740/Kconfig
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel@sifive.com>
+
+config SIFIVE_FU740
+ bool
+ select ARCH_EARLY_INIT_R
+ select RAM
+ select SPL_RAM if SPL
+ imply CPU
+ imply CPU_RISCV
+ imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
+ imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
+ imply CMD_CPU
+ imply SPL_CPU_SUPPORT
+ imply SPL_OPENSBI
+ imply SPL_LOAD_FIT
+ imply SMP
+ imply CLK_SIFIVE
+ imply CLK_SIFIVE_PRCI
+ imply SIFIVE_SERIAL
+ imply MACB
+ imply MII
+ imply SPI
+ imply SPI_SIFIVE
+ imply MMC
+ imply MMC_SPI
+ imply MMC_BROKEN_CD
+ imply CMD_MMC
+ imply DM_GPIO
+ imply SIFIVE_GPIO
+ imply CMD_GPIO
+ imply MISC
+ imply SIFIVE_OTP
+ imply DM_PWM
+ imply PWM_SIFIVE
diff --git a/arch/riscv/cpu/fu740/Makefile b/arch/riscv/cpu/fu740/Makefile
new file mode 100644
index 0000000000..5ef8ac18a7
--- /dev/null
+++ b/arch/riscv/cpu/fu740/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel@sifive.com>
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-y += spl.o
+else
+obj-y += dram.o
+obj-y += cpu.o
+obj-y += cache.o
+endif
diff --git a/arch/riscv/cpu/fu740/cache.c b/arch/riscv/cpu/fu740/cache.c
new file mode 100644
index 0000000000..680955c9e3
--- /dev/null
+++ b/arch/riscv/cpu/fu740/cache.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <asm/global_data.h>
+
+/* Register offsets */
+#define L2_CACHE_CONFIG 0x000
+#define L2_CACHE_ENABLE 0x008
+
+#define MASK_NUM_WAYS GENMASK(15, 8)
+#define NUM_WAYS_SHIFT 8
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cache_enable_ways(void)
+{
+ const void *blob = gd->fdt_blob;
+ int node;
+ fdt_addr_t base;
+ u32 config;
+ u32 ways;
+
+ volatile u32 *enable;
+
+ node = fdt_node_offset_by_compatible(blob, -1,
+ "sifive,fu740-c000-ccache");
+
+ if (node < 0)
+ return node;
+
+ base = fdtdec_get_addr_size_auto_parent(blob, 0, node, "reg", 0,
+ NULL, false);
+ if (base == FDT_ADDR_T_NONE)
+ return FDT_ADDR_T_NONE;
+
+ config = readl((volatile u32 *)base + L2_CACHE_CONFIG);
+ ways = (config & MASK_NUM_WAYS) >> NUM_WAYS_SHIFT;
+
+ enable = (volatile u32 *)(base + L2_CACHE_ENABLE);
+
+ /* memory barrier */
+ mb();
+ (*enable) = ways - 1;
+ /* memory barrier */
+ mb();
+ return 0;
+}
diff --git a/arch/riscv/cpu/fu740/cpu.c b/arch/riscv/cpu/fu740/cpu.c
new file mode 100644
index 0000000000..f13c18942f
--- /dev/null
+++ b/arch/riscv/cpu/fu740/cpu.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <irq_func.h>
+#include <asm/cache.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+ disable_interrupts();
+
+ cache_flush();
+
+ return 0;
+}
diff --git a/arch/riscv/cpu/fu740/dram.c b/arch/riscv/cpu/fu740/dram.c
new file mode 100644
index 0000000000..1dc77efeca
--- /dev/null
+++ b/arch/riscv/cpu/fu740/dram.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_64BIT
+ /*
+ * Ensure that we run from first 4GB so that all
+ * addresses used by U-Boot are 32bit addresses.
+ *
+ * This in-turn ensures that 32bit DMA capable
+ * devices work fine because DMA mapping APIs will
+ * provide 32bit DMA addresses only.
+ */
+ if (gd->ram_top > SZ_4G)
+ return SZ_4G;
+#endif
+ return gd->ram_top;
+}
diff --git a/arch/riscv/cpu/fu740/spl.c b/arch/riscv/cpu/fu740/spl.c
new file mode 100644
index 0000000000..ea0b2283a2
--- /dev/null
+++ b/arch/riscv/cpu/fu740/spl.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-201 SiFive, Inc
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <dm.h>
+#include <log.h>
+
+int spl_soc_init(void)
+{
+ int ret;
+ struct udevice *dev;
+
+ /* DDR init */
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/arch/riscv/include/asm/arch-fu740/cache.h b/arch/riscv/include/asm/arch-fu740/cache.h
new file mode 100644
index 0000000000..7d4fe9942b
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/cache.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifve.com>
+ */
+
+#ifndef _CACHE_SIFIVE_H
+#define _CACHE_SIFIVE_H
+
+int cache_enable_ways(void);
+
+#endif /* _CACHE_SIFIVE_H */
diff --git a/arch/riscv/include/asm/arch-fu740/clk.h b/arch/riscv/include/asm/arch-fu740/clk.h
new file mode 100644
index 0000000000..9f883616b2
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/clk.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020-2021 SiFive Inc
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#ifndef __CLK_SIFIVE_H
+#define __CLK_SIFIVE_H
+
+/* Note: This is a placeholder header for driver compilation. */
+
+#endif
diff --git a/arch/riscv/include/asm/arch-fu740/gpio.h b/arch/riscv/include/asm/arch-fu740/gpio.h
new file mode 100644
index 0000000000..908e2e5563
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/gpio.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ */
+
+#ifndef _GPIO_SIFIVE_H
+#define _GPIO_SIFIVE_H
+
+#define GPIO_INPUT_VAL 0x00
+#define GPIO_INPUT_EN 0x04
+#define GPIO_OUTPUT_EN 0x08
+#define GPIO_OUTPUT_VAL 0x0C
+#define GPIO_RISE_IE 0x18
+#define GPIO_RISE_IP 0x1C
+#define GPIO_FALL_IE 0x20
+#define GPIO_FALL_IP 0x24
+#define GPIO_HIGH_IE 0x28
+#define GPIO_HIGH_IP 0x2C
+#define GPIO_LOW_IE 0x30
+#define GPIO_LOW_IP 0x34
+#define GPIO_OUTPUT_XOR 0x40
+
+#define NR_GPIOS 16
+
+enum gpio_state {
+ LOW,
+ HIGH
+};
+
+/* Details about a GPIO bank */
+struct sifive_gpio_plat {
+ void *base; /* address of registers in physical memory */
+};
+
+#define SIFIVE_GENERIC_GPIO_NR(port, index) \
+ (((port) * NR_GPIOS) + ((index) & (NR_GPIOS - 1)))
+
+#endif /* _GPIO_SIFIVE_H */
diff --git a/arch/riscv/include/asm/arch-fu740/reset.h b/arch/riscv/include/asm/arch-fu740/reset.h
new file mode 100644
index 0000000000..538ef87410
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/reset.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020-2021 SiFive, Inc.
+ *
+ * Author: Sagar Kadam <sagar.kadam@sifive.com>
+ */
+
+#ifndef __RESET_SIFIVE_H
+#define __RESET_SIFIVE_H
+
+int sifive_reset_bind(struct udevice *dev, ulong count);
+
+#endif
diff --git a/arch/riscv/include/asm/arch-fu740/spl.h b/arch/riscv/include/asm/arch-fu740/spl.h
new file mode 100644
index 0000000000..15ad9e7c8b
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/spl.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifve.com>
+ */
+
+#ifndef _SPL_SIFIVE_H
+#define _SPL_SIFIVE_H
+
+int spl_soc_init(void);
+
+#endif /* _SPL_SIFIVE_H */
diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c
index ab22395c55..cfa288a01a 100644
--- a/arch/riscv/lib/sifive_clint.c
+++ b/arch/riscv/lib/sifive_clint.c
@@ -10,7 +10,6 @@
#include <common.h>
#include <dm.h>
-#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <linux/err.h>
--
2.31.0
next prev parent reply other threads:[~2021-04-08 10:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-08 10:26 [PATCH v5 0/8] Add FU740 chip and HiFive Unmatched board support Green Wan
2021-04-08 10:26 ` [PATCH v5 1/8] riscv: dts: add fu740 support Green Wan
2021-04-08 10:26 ` Green Wan [this message]
2021-04-08 10:26 ` [PATCH v5 3/8] drivers: clk: " Green Wan
2021-04-08 10:26 ` [PATCH v5 4/8] drivers: ram: sifive: rename fu540_ddr and " Green Wan
2021-04-08 10:26 ` [PATCH v5 5/8] drivers: pci: add pcie support for fu740 Green Wan
2021-04-08 10:26 ` [PATCH v5 6/8] board: sifive: add HiFive Unmatched board support Green Wan
2021-04-08 10:26 ` [PATCH v5 7/8] drivers: net: macb: add fu740 support Green Wan
2021-04-08 10:26 ` [PATCH v5 8/8] arch: riscv: dts: Set speed of FU740 to 1.2GHz Green Wan
2021-04-08 12:09 ` Bin Meng
2021-04-08 13:11 ` Green Wan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210408102657.201027-3-green.wan@sifive.com \
--to=green.wan@sifive.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.