[PATCH AUTOSEL 4.4 1/7] ARM: dts: Fix swapped mmc order for omap3

[PATCH AUTOSEL 4.4 1/7] ARM: dts: Fix swapped mmc order for omap3

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]

Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped
around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for
drivers that existed in v4.4").

Let's fix the issue with aliases as discussed on the mailing lists. While
the mmc aliases should be board specific, let's first fix the issue with
minimal changes.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8a2b25332b8c..a2e41d79e829 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -22,6 +22,9 @@ aliases {
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
-- 
2.30.2

[PATCH AUTOSEL 4.4 2/7] s390/entry: save the caller of psw_idle

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit a994eddb947ea9ebb7b14d9a1267001699f0a136 ]

Currently psw_idle does not allocate a stack frame and does not
save its r14 and r15 into the save area. Even though this is valid from
call ABI point of view, because psw_idle does not make any calls
explicitly, in reality psw_idle is an entry point for controlled
transition into serving interrupts. So, in practice, psw_idle stack
frame is analyzed during stack unwinding. Depending on build options
that r14 slot in the save area of psw_idle might either contain a value
saved by previous sibling call or complete garbage.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs
 ([task    0000038000003dd8] 0x0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

So, to make a stacktrace nicer and actually point for the real caller of
psw_idle in this frequently occurring case, make psw_idle save its r14.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs
 ([task    0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/entry.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 4cad1adff16b..d43f18b3d42c 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -889,6 +889,7 @@ ENTRY(ext_int_handler)
  * Load idle PSW. The second "half" of this function is in .Lcleanup_idle.
  */
 ENTRY(psw_idle)
+	stg	%r14,(__SF_GPRS+8*8)(%r15)
 	stg	%r3,__SF_EMPTY(%r15)
 	larl	%r1,.Lpsw_idle_lpsw+4
 	stg	%r1,__SF_EMPTY+8(%r15)
-- 
2.30.2

[PATCH AUTOSEL 4.4 3/7] xen-netback: Check for hotplug-status existence before watching

[Sasha Levin]

From: Michael Brown <mbrown@fensystems.co.uk>

[ Upstream commit 2afeec08ab5c86ae21952151f726bfe184f6b23d ]

The logic in connect() is currently written with the assumption that
xenbus_watch_pathfmt() will return an error for a node that does not
exist.  This assumption is incorrect: xenstore does allow a watch to
be registered for a nonexistent node (and will send notifications
should the node be subsequently created).

As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it
has served its purpose"), this leads to a failure when a domU
transitions into XenbusStateConnected more than once.  On the first
domU transition into Connected state, the "hotplug-status" node will
be deleted by the hotplug_status_changed() callback in dom0.  On the
second or subsequent domU transition into Connected state, the
hotplug_status_changed() callback will therefore never be invoked, and
so the backend will remain stuck in InitWait.

This failure prevents scenarios such as reloading the xen-netfront
module within a domU, or booting a domU via iPXE.  There is
unfortunately no way for the domU to work around this dom0 bug.

Fix by explicitly checking for existence of the "hotplug-status" node,
thereby creating the behaviour that was previously assumed to exist.

Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/xenbus.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 21c8e2720b40..683fd8560f2b 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -849,11 +849,15 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
-				   hotplug_status_changed,
-				   "%s/%s", dev->nodename, "hotplug-status");
-	if (!err)
+	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
+		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
+					   NULL, hotplug_status_changed,
+					   "%s/%s", dev->nodename,
+					   "hotplug-status");
+		if (err)
+			goto err;
 		be->have_hotplug_status_watch = 1;
+	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 4/7] cavium/liquidio: Fix duplicate argument

[Sasha Levin]

From: Wan Jiabing <wanjiabing@vivo.com>

[ Upstream commit 416dcc5ce9d2a810477171c62ffa061a98f87367 ]

Fix the following coccicheck warning:

./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28:
duplicated argument to & or |

The CN6XXX_INTR_M1UPB0_ERR here is duplicate.
Here should be CN6XXX_INTR_M1UNB0_ERR.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h b/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h
index 5e3aff242ad3..3ab84d18ad3a 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h
+++ b/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h
@@ -417,7 +417,7 @@
 	   | CN6XXX_INTR_M0UNWI_ERR             \
 	   | CN6XXX_INTR_M1UPB0_ERR             \
 	   | CN6XXX_INTR_M1UPWI_ERR             \
-	   | CN6XXX_INTR_M1UPB0_ERR             \
+	   | CN6XXX_INTR_M1UNB0_ERR             \
 	   | CN6XXX_INTR_M1UNWI_ERR             \
 	   | CN6XXX_INTR_INSTR_DB_OF_ERR        \
 	   | CN6XXX_INTR_SLIST_DB_OF_ERR        \
-- 
2.30.2

[PATCH AUTOSEL 4.4 5/7] i2c: mv64xxx: Fix random system lock caused by runtime PM

[Sasha Levin]

From: Marek Behún <kabel@kernel.org>

[ Upstream commit 39930213e7779b9c4257499972b8afb8858f1a2d ]

I noticed a weird bug with this driver on Marvell CN9130 Customer
Reference Board.

Sometime after boot, the system locks with the following message:
 [104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0

The system does not respond afterwards, only warns about RCU stalls.

This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime
PM support").

With further experimentation I discovered that adding a delay into
mv64xxx_i2c_hw_init() fixes this issue. This function is called before
every xfer, due to how runtime PM works in this driver. It seems that in
order to work correctly, a delay is needed after the bus is reset in
this function.

Since there already is a known erratum with this controller needing a
delay, I assume that this is just another place this needs to be
applied. Therefore I apply the delay only if errata_delay is true.

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mv64xxx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 332d32c53c41..73324f047932 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -219,6 +219,10 @@ mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
 	writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
 	writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
 		drv_data->reg_base + drv_data->reg_offsets.control);
+
+	if (drv_data->errata_delay)
+		udelay(5);
+
 	drv_data->state = MV64XXX_I2C_STATE_IDLE;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 6/7] ia64: fix discontig.c section mismatches

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/discontig.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 878626805369..3b0c892953ab 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -99,7 +99,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
  * called yet.  Note that node 0 will also count all non-existent cpus.
  */
-static int __meminit early_nr_cpus_node(int node)
+static int early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 
@@ -114,7 +114,7 @@ static int __meminit early_nr_cpus_node(int node)
  * compute_pernodesize - compute size of pernode data
  * @node: the node id.
  */
-static unsigned long __meminit compute_pernodesize(int node)
+static unsigned long compute_pernodesize(int node)
 {
 	unsigned long pernodesize = 0, cpus;
 
@@ -411,7 +411,7 @@ static void __init reserve_pernode_space(void)
 	}
 }
 
-static void __meminit scatter_node_data(void)
+static void scatter_node_data(void)
 {
 	pg_data_t **dst;
 	int node;
-- 
2.30.2

[PATCH AUTOSEL 4.4 6/7] ia64: fix discontig.c section mismatches

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/discontig.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 878626805369..3b0c892953ab 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -99,7 +99,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
  * called yet.  Note that node 0 will also count all non-existent cpus.
  */
-static int __meminit early_nr_cpus_node(int node)
+static int early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 
@@ -114,7 +114,7 @@ static int __meminit early_nr_cpus_node(int node)
  * compute_pernodesize - compute size of pernode data
  * @node: the node id.
  */
-static unsigned long __meminit compute_pernodesize(int node)
+static unsigned long compute_pernodesize(int node)
 {
 	unsigned long pernodesize = 0, cpus;
 
@@ -411,7 +411,7 @@ static void __init reserve_pernode_space(void)
 	}
 }
 
-static void __meminit scatter_node_data(void)
+static void scatter_node_data(void)
 {
 	pg_data_t **dst;
 	int node;
-- 
2.30.2

[PATCH AUTOSEL 4.4 7/7] ia64: tools: remove duplicate definition of ia64_mf() on ia64

[Sasha Levin]

From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

[ Upstream commit f4bf09dc3aaa4b07cd15630f2023f68cb2668809 ]

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/arch/ia64/include/asm/barrier.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/tools/arch/ia64/include/asm/barrier.h b/tools/arch/ia64/include/asm/barrier.h
index e4422b4b634e..94ae4a333a35 100644
--- a/tools/arch/ia64/include/asm/barrier.h
+++ b/tools/arch/ia64/include/asm/barrier.h
@@ -38,9 +38,6 @@
  * sequential memory pages only.
  */
 
-/* XXX From arch/ia64/include/uapi/asm/gcc_intrin.h */
-#define ia64_mf()       asm volatile ("mf" ::: "memory")
-
 #define mb()		ia64_mf()
 #define rmb()		mb()
 #define wmb()		mb()
-- 
2.30.2

Re: [PATCH AUTOSEL 4.4 1/7] ARM: dts: Fix swapped mmc order for omap3

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1033 bytes --]

Hi!

> From: Tony Lindgren <tony@atomide.com>
> 
> [ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]
> 
> Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped
> around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for
> drivers that existed in v4.4").
> 
> Let's fix the issue with aliases as discussed on the mailing lists. While
> the mmc aliases should be board specific, let's first fix the issue with
> minimal changes.

21b2cec61c04 tries to make newer kernels compatible with 4.4, and this
is fixup for 21b2cec61c04. 21b2cec61c04 is not in 4.4 (obviously) so i
don't believe we need this for 4.4.

As this claims to "making it compatible with 4.4", I believe we should
leave 4.4 alone.

21b2cec61c04 is not present in v4.19, either, but what needs to be
done there is less clear.

21b2cec61c04 is in v5.10, so a1ebdb3741993f853865d1bd8f77881916ad53a7
makes sense there, too.

Best regards,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]