[PATCH u-boot v2019.04-aspeed-openbmc v2 07/10] ast2600: spl: Support common boot loader features

[Joel Stanley <joel@jms.id.au>]

Enable the common SPL code for loading boot images from various devices
that the system can be configured to use. These loaders are used when
not using the custom ASPEED loaders.

The system will try to boot from the strapped device, but fall back to
the UART.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/mach-aspeed/ast2600/spl.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/mach-aspeed/ast2600/spl.c b/arch/arm/mach-aspeed/ast2600/spl.c
index 40eabca683c2..778b326755ba 100644
--- a/arch/arm/mach-aspeed/ast2600/spl.c
+++ b/arch/arm/mach-aspeed/ast2600/spl.c
@@ -61,11 +61,26 @@ u32 spl_boot_device(void)
 	default:
 		break;
 	}
+#else
+	switch (aspeed_bootmode()) {
+	case AST_BOOTMODE_EMMC:
+		return BOOT_DEVICE_MMC1;
+	case AST_BOOTMODE_SPI:
+		return BOOT_DEVICE_SPI;
+	case AST_BOOTMODE_UART:
+		return BOOT_DEVICE_UART;
+	}
 #endif
 
 	return BOOT_DEVICE_NONE;
 }
 
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+	spl_boot_list[1] = ASPEED_BOOT_DEVICE_UART;
+}
+
 #ifdef CONFIG_SPL_OS_BOOT
 int spl_start_uboot(void)
 {
-- 
2.30.2