Re: [PATCHv7 bpf-next 1/4] bpf: run devmap xdp_prog on flush instead of bulk enqueue

["Paul E. McKenney" <paulmck@kernel.org>]

On Wed, Apr 21, 2021 at 04:24:41PM +0200, Toke Høiland-Jørgensen wrote:
> "Paul E. McKenney" <paulmck@kernel.org> writes:
> 
> > On Tue, Apr 20, 2021 at 12:16:40AM +0200, Toke Høiland-Jørgensen wrote:
> >> "Paul E. McKenney" <paulmck@kernel.org> writes:
> >> 
> >> > On Mon, Apr 19, 2021 at 11:21:41PM +0200, Toke Høiland-Jørgensen wrote:
> >> >> "Paul E. McKenney" <paulmck@kernel.org> writes:
> >> >> 
> >> >> > On Mon, Apr 19, 2021 at 08:12:27PM +0200, Toke Høiland-Jørgensen wrote:
> >> >> >> "Paul E. McKenney" <paulmck@kernel.org> writes:
> >> >> >> 
> >> >> >> > On Sat, Apr 17, 2021 at 02:27:19PM +0200, Toke Høiland-Jørgensen wrote:
> >> >> >> >> "Paul E. McKenney" <paulmck@kernel.org> writes:
> >> >> >> >> 
> >> >> >> >> > On Fri, Apr 16, 2021 at 11:22:52AM -0700, Martin KaFai Lau wrote:
> >> >> >> >> >> On Fri, Apr 16, 2021 at 03:45:23PM +0200, Jesper Dangaard Brouer wrote:
> >> >> >> >> >> > On Thu, 15 Apr 2021 17:39:13 -0700
> >> >> >> >> >> > Martin KaFai Lau <kafai@fb.com> wrote:
> >> >> >> >> >> > 
> >> >> >> >> >> > > On Thu, Apr 15, 2021 at 10:29:40PM +0200, Toke Høiland-Jørgensen wrote:
> >> >> >> >> >> > > > Jesper Dangaard Brouer <brouer@redhat.com> writes:
> >> >> >> >> >> > > >   
> >> >> >> >> >> > > > > On Thu, 15 Apr 2021 10:35:51 -0700
> >> >> >> >> >> > > > > Martin KaFai Lau <kafai@fb.com> wrote:
> >> >> >> >> >> > > > >  
> >> >> >> >> >> > > > >> On Thu, Apr 15, 2021 at 11:22:19AM +0200, Toke Høiland-Jørgensen wrote:  
> >> >> >> >> >> > > > >> > Hangbin Liu <liuhangbin@gmail.com> writes:
> >> >> >> >> >> > > > >> >     
> >> >> >> >> >> > > > >> > > On Wed, Apr 14, 2021 at 05:17:11PM -0700, Martin KaFai Lau wrote:    
> >> >> >> >> >> > > > >> > >> >  static void bq_xmit_all(struct xdp_dev_bulk_queue *bq, u32 flags)
> >> >> >> >> >> > > > >> > >> >  {
> >> >> >> >> >> > > > >> > >> >  	struct net_device *dev = bq->dev;
> >> >> >> >> >> > > > >> > >> > -	int sent = 0, err = 0;
> >> >> >> >> >> > > > >> > >> > +	int sent = 0, drops = 0, err = 0;
> >> >> >> >> >> > > > >> > >> > +	unsigned int cnt = bq->count;
> >> >> >> >> >> > > > >> > >> > +	int to_send = cnt;
> >> >> >> >> >> > > > >> > >> >  	int i;
> >> >> >> >> >> > > > >> > >> >  
> >> >> >> >> >> > > > >> > >> > -	if (unlikely(!bq->count))
> >> >> >> >> >> > > > >> > >> > +	if (unlikely(!cnt))
> >> >> >> >> >> > > > >> > >> >  		return;
> >> >> >> >> >> > > > >> > >> >  
> >> >> >> >> >> > > > >> > >> > -	for (i = 0; i < bq->count; i++) {
> >> >> >> >> >> > > > >> > >> > +	for (i = 0; i < cnt; i++) {
> >> >> >> >> >> > > > >> > >> >  		struct xdp_frame *xdpf = bq->q[i];
> >> >> >> >> >> > > > >> > >> >  
> >> >> >> >> >> > > > >> > >> >  		prefetch(xdpf);
> >> >> >> >> >> > > > >> > >> >  	}
> >> >> >> >> >> > > > >> > >> >  
> >> >> >> >> >> > > > >> > >> > -	sent = dev->netdev_ops->ndo_xdp_xmit(dev, bq->count, bq->q, flags);
> >> >> >> >> >> > > > >> > >> > +	if (bq->xdp_prog) {    
> >> >> >> >> >> > > > >> > >> bq->xdp_prog is used here
> >> >> >> >> >> > > > >> > >>     
> >> >> >> >> >> > > > >> > >> > +		to_send = dev_map_bpf_prog_run(bq->xdp_prog, bq->q, cnt, dev);
> >> >> >> >> >> > > > >> > >> > +		if (!to_send)
> >> >> >> >> >> > > > >> > >> > +			goto out;
> >> >> >> >> >> > > > >> > >> > +
> >> >> >> >> >> > > > >> > >> > +		drops = cnt - to_send;
> >> >> >> >> >> > > > >> > >> > +	}
> >> >> >> >> >> > > > >> > >> > +    
> >> >> >> >> >> > > > >> > >> 
> >> >> >> >> >> > > > >> > >> [ ... ]
> >> >> >> >> >> > > > >> > >>     
> >> >> >> >> >> > > > >> > >> >  static void bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
> >> >> >> >> >> > > > >> > >> > -		       struct net_device *dev_rx)
> >> >> >> >> >> > > > >> > >> > +		       struct net_device *dev_rx, struct bpf_prog *xdp_prog)
> >> >> >> >> >> > > > >> > >> >  {
> >> >> >> >> >> > > > >> > >> >  	struct list_head *flush_list = this_cpu_ptr(&dev_flush_list);
> >> >> >> >> >> > > > >> > >> >  	struct xdp_dev_bulk_queue *bq = this_cpu_ptr(dev->xdp_bulkq);
> >> >> >> >> >> > > > >> > >> > @@ -412,18 +466,22 @@ static void bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
> >> >> >> >> >> > > > >> > >> >  	/* Ingress dev_rx will be the same for all xdp_frame's in
> >> >> >> >> >> > > > >> > >> >  	 * bulk_queue, because bq stored per-CPU and must be flushed
> >> >> >> >> >> > > > >> > >> >  	 * from net_device drivers NAPI func end.
> >> >> >> >> >> > > > >> > >> > +	 *
> >> >> >> >> >> > > > >> > >> > +	 * Do the same with xdp_prog and flush_list since these fields
> >> >> >> >> >> > > > >> > >> > +	 * are only ever modified together.
> >> >> >> >> >> > > > >> > >> >  	 */
> >> >> >> >> >> > > > >> > >> > -	if (!bq->dev_rx)
> >> >> >> >> >> > > > >> > >> > +	if (!bq->dev_rx) {
> >> >> >> >> >> > > > >> > >> >  		bq->dev_rx = dev_rx;
> >> >> >> >> >> > > > >> > >> > +		bq->xdp_prog = xdp_prog;    
> >> >> >> >> >> > > > >> > >> bp->xdp_prog is assigned here and could be used later in bq_xmit_all().
> >> >> >> >> >> > > > >> > >> How is bq->xdp_prog protected? Are they all under one rcu_read_lock()?
> >> >> >> >> >> > > > >> > >> It is not very obvious after taking a quick look at xdp_do_flush[_map].
> >> >> >> >> >> > > > >> > >> 
> >> >> >> >> >> > > > >> > >> e.g. what if the devmap elem gets deleted.    
> >> >> >> >> >> > > > >> > >
> >> >> >> >> >> > > > >> > > Jesper knows better than me. From my veiw, based on the description of
> >> >> >> >> >> > > > >> > > __dev_flush():
> >> >> >> >> >> > > > >> > >
> >> >> >> >> >> > > > >> > > On devmap tear down we ensure the flush list is empty before completing to
> >> >> >> >> >> > > > >> > > ensure all flush operations have completed. When drivers update the bpf
> >> >> >> >> >> > > > >> > > program they may need to ensure any flush ops are also complete.    
> >> >> >> >> >> > > > >>
> >> >> >> >> >> > > > >> AFAICT, the bq->xdp_prog is not from the dev. It is from a devmap's elem.
> >> >> >> >> >> > 
> >> >> >> >> >> > The bq->xdp_prog comes form the devmap "dev" element, and it is stored
> >> >> >> >> >> > in temporarily in the "bq" structure that is only valid for this
> >> >> >> >> >> > softirq NAPI-cycle.  I'm slightly worried that we copied this pointer
> >> >> >> >> >> > the the xdp_prog here, more below (and Q for Paul).
> >> >> >> >> >> > 
> >> >> >> >> >> > > > >> > 
> >> >> >> >> >> > > > >> > Yeah, drivers call xdp_do_flush() before exiting their NAPI poll loop,
> >> >> >> >> >> > > > >> > which also runs under one big rcu_read_lock(). So the storage in the
> >> >> >> >> >> > > > >> > bulk queue is quite temporary, it's just used for bulking to increase
> >> >> >> >> >> > > > >> > performance :)    
> >> >> >> >> >> > > > >>
> >> >> >> >> >> > > > >> I am missing the one big rcu_read_lock() part.  For example, in i40e_txrx.c,
> >> >> >> >> >> > > > >> i40e_run_xdp() has its own rcu_read_lock/unlock().  dst->xdp_prog used to run
> >> >> >> >> >> > > > >> in i40e_run_xdp() and it is fine.
> >> >> >> >> >> > > > >> 
> >> >> >> >> >> > > > >> In this patch, dst->xdp_prog is run outside of i40e_run_xdp() where the
> >> >> >> >> >> > > > >> rcu_read_unlock() has already done.  It is now run in xdp_do_flush_map().
> >> >> >> >> >> > > > >> or I missed the big rcu_read_lock() in i40e_napi_poll()?
> >> >> >> >> >> > > > >>
> >> >> >> >> >> > > > >> I do see the big rcu_read_lock() in mlx5e_napi_poll().  
> >> >> >> >> >> > > > >
> >> >> >> >> >> > > > > I believed/assumed xdp_do_flush_map() was already protected under an
> >> >> >> >> >> > > > > rcu_read_lock.  As the devmap and cpumap, which get called via
> >> >> >> >> >> > > > > __dev_flush() and __cpu_map_flush(), have multiple RCU objects that we
> >> >> >> >> >> > > > > are operating on.  
> >> >> >> >> >> > >
> >> >> >> >> >> > > What other rcu objects it is using during flush?
> >> >> >> >> >> > 
> >> >> >> >> >> > Look at code:
> >> >> >> >> >> >  kernel/bpf/cpumap.c
> >> >> >> >> >> >  kernel/bpf/devmap.c
> >> >> >> >> >> > 
> >> >> >> >> >> > The devmap is filled with RCU code and complicated take-down steps.  
> >> >> >> >> >> > The devmap's elements are also RCU objects and the BPF xdp_prog is
> >> >> >> >> >> > embedded in this object (struct bpf_dtab_netdev).  The call_rcu
> >> >> >> >> >> > function is __dev_map_entry_free().
> >> >> >> >> >> > 
> >> >> >> >> >> > 
> >> >> >> >> >> > > > > Perhaps it is a bug in i40e?  
> >> >> >> >> >> > >
> >> >> >> >> >> > > A quick look into ixgbe falls into the same bucket.
> >> >> >> >> >> > > didn't look at other drivers though.
> >> >> >> >> >> > 
> >> >> >> >> >> > Intel driver are very much in copy-paste mode.
> >> >> >> >> >> >  
> >> >> >> >> >> > > > >
> >> >> >> >> >> > > > > We are running in softirq in NAPI context, when xdp_do_flush_map() is
> >> >> >> >> >> > > > > call, which I think means that this CPU will not go-through a RCU grace
> >> >> >> >> >> > > > > period before we exit softirq, so in-practice it should be safe.  
> >> >> >> >> >> > > > 
> >> >> >> >> >> > > > Yup, this seems to be correct: rcu_softirq_qs() is only called between
> >> >> >> >> >> > > > full invocations of the softirq handler, which for networking is
> >> >> >> >> >> > > > net_rx_action(), and so translates into full NAPI poll cycles.  
> >> >> >> >> >> > >
> >> >> >> >> >> > > I don't know enough to comment on the rcu/softirq part, may be someone
> >> >> >> >> >> > > can chime in.  There is also a recent napi_threaded_poll().
> >> >> >> >> >> > 
> >> >> >> >> >> > CC added Paul. (link to patch[1][2] for context)
> >> >> >> >> >> Updated Paul's email address.
> >> >> >> >> >> 
> >> >> >> >> >> > 
> >> >> >> >> >> > > If it is the case, then some of the existing rcu_read_lock() is unnecessary?
> >> >> >> >> >> > 
> >> >> >> >> >> > Well, in many cases, especially depending on how kernel is compiled,
> >> >> >> >> >> > that is true.  But we want to keep these, as they also document the
> >> >> >> >> >> > intend of the programmer.  And allow us to make the kernel even more
> >> >> >> >> >> > preempt-able in the future.
> >> >> >> >> >> > 
> >> >> >> >> >> > > At least, it sounds incorrect to only make an exception here while keeping
> >> >> >> >> >> > > other rcu_read_lock() as-is.
> >> >> >> >> >> > 
> >> >> >> >> >> > Let me be clear:  I think you have spotted a problem, and we need to
> >> >> >> >> >> > add rcu_read_lock() at least around the invocation of
> >> >> >> >> >> > bpf_prog_run_xdp() or before around if-statement that call
> >> >> >> >> >> > dev_map_bpf_prog_run(). (Hangbin please do this in V8).
> >> >> >> >> >> > 
> >> >> >> >> >> > Thank you Martin for reviewing the code carefully enough to find this
> >> >> >> >> >> > issue, that some drivers don't have a RCU-section around the full XDP
> >> >> >> >> >> > code path in their NAPI-loop.
> >> >> >> >> >> > 
> >> >> >> >> >> > Question to Paul.  (I will attempt to describe in generic terms what
> >> >> >> >> >> > happens, but ref real-function names).
> >> >> >> >> >> > 
> >> >> >> >> >> > We are running in softirq/NAPI context, the driver will call a
> >> >> >> >> >> > bq_enqueue() function for every packet (if calling xdp_do_redirect) ,
> >> >> >> >> >> > some driver wrap this with a rcu_read_lock/unlock() section (other have
> >> >> >> >> >> > a large RCU-read section, that include the flush operation).
> >> >> >> >> >> > 
> >> >> >> >> >> > In the bq_enqueue() function we have a per_cpu_ptr (that store the
> >> >> >> >> >> > xdp_frame packets) that will get flushed/send in the call
> >> >> >> >> >> > xdp_do_flush() (that end-up calling bq_xmit_all()).  This flush will
> >> >> >> >> >> > happen before we end our softirq/NAPI context.
> >> >> >> >> >> > 
> >> >> >> >> >> > The extension is that the per_cpu_ptr data structure (after this patch)
> >> >> >> >> >> > store a pointer to an xdp_prog (which is a RCU object).  In the flush
> >> >> >> >> >> > operation (which we will wrap with RCU-read section), we will use this
> >> >> >> >> >> > xdp_prog pointer.   I can see that it is in-principle wrong to pass
> >> >> >> >> >> > this-pointer between RCU-read sections, but I consider this safe as we
> >> >> >> >> >> > are running under softirq/NAPI and the per_cpu_ptr is only valid in
> >> >> >> >> >> > this short interval.
> >> >> >> >> >> > 
> >> >> >> >> >> > I claim a grace/quiescent RCU cannot happen between these two RCU-read
> >> >> >> >> >> > sections, but I might be wrong? (especially in the future or for RT).
> >> >> >> >> >
> >> >> >> >> > If I am reading this correctly (ha!), a very high-level summary of the
> >> >> >> >> > code in question is something like this:
> >> >> >> >> >
> >> >> >> >> > 	void foo(void)
> >> >> >> >> > 	{
> >> >> >> >> > 		local_bh_disable();
> >> >> >> >> >
> >> >> >> >> > 		rcu_read_lock();
> >> >> >> >> > 		p = rcu_dereference(gp);
> >> >> >> >> > 		do_something_with(p);
> >> >> >> >> > 		rcu_read_unlock();
> >> >> >> >> >
> >> >> >> >> > 		do_something_else();
> >> >> >> >> >
> >> >> >> >> > 		rcu_read_lock();
> >> >> >> >> > 		do_some_other_thing(p);
> >> >> >> >> > 		rcu_read_unlock();
> >> >> >> >> >
> >> >> >> >> > 		local_bh_enable();
> >> >> >> >> > 	}
> >> >> >> >> >
> >> >> >> >> > 	void bar(struct blat *new_gp)
> >> >> >> >> > 	{
> >> >> >> >> > 		struct blat *old_gp;
> >> >> >> >> >
> >> >> >> >> > 		spin_lock(my_lock);
> >> >> >> >> > 		old_gp = rcu_dereference_protected(gp, lock_held(my_lock));
> >> >> >> >> > 		rcu_assign_pointer(gp, new_gp);
> >> >> >> >> > 		spin_unlock(my_lock);
> >> >> >> >> > 		synchronize_rcu();
> >> >> >> >> > 		kfree(old_gp);
> >> >> >> >> > 	}
> >> >> >> >> 
> >> >> >> >> Yeah, something like that (the object is freed using call_rcu() - but I
> >> >> >> >> think that's equivalent, right?). And the question is whether we need to
> >> >> >> >> extend foo() so that is has one big rcu_read_lock() that covers the
> >> >> >> >> whole lifetime of p.
> >> >> >> >
> >> >> >> > Yes, use of call_rcu() is an asynchronous version of synchronize_rcu().
> >> >> >> > In fact, synchronize_rcu() is implemented in terms of call_rcu().  ;-)
> >> >> >> 
> >> >> >> Right, gotcha!
> >> >> >> 
> >> >> >> >> > I need to check up on -rt.
> >> >> >> >> >
> >> >> >> >> > But first... In recent mainline kernels, the local_bh_disable() region
> >> >> >> >> > will look like one big RCU read-side critical section.  But don't try
> >> >> >> >> > this prior to v4.20!!!  In v4.19 and earlier, you would need to use
> >> >> >> >> > both synchronize_rcu() and synchronize_rcu_bh() to make this work, or,
> >> >> >> >> > for less latency, synchronize_rcu_mult(call_rcu, call_rcu_bh).
> >> >> >> >> 
> >> >> >> >> OK. Variants of this code has been around since before then, but I
> >> >> >> >> honestly have no idea what it looked like back then exactly...
> >> >> >> >
> >> >> >> > I know that feeling...
> >> >> >> >
> >> >> >> >> > Except that in that case, why not just drop the inner rcu_read_unlock()
> >> >> >> >> > and rcu_read_lock() pair?  Awkward function boundaries or some such?
> >> >> >> >> 
> >> >> >> >> Well if we can just treat such a local_bh_disable()/enable() pair as the
> >> >> >> >> equivalent of rcu_read_lock()/unlock() then I suppose we could just get
> >> >> >> >> rid of the inner ones. What about tools like lockdep; do they understand
> >> >> >> >> this, or are we likely to get complaints if we remove it?
> >> >> >> >
> >> >> >> > If you just got rid of the first rcu_read_unlock() and the second
> >> >> >> > rcu_read_lock() in the code above, lockdep will understand.
> >> >> >> 
> >> >> >> Right, but doing so entails going through all the drivers, which is what
> >> >> >> we're trying to avoid :)
> >> >> >
> >> >> > I was afraid of that...  ;-)
> >> >> >
> >> >> >> > However, if you instead get rid of -all- of the rcu_read_lock() and
> >> >> >> > rcu_read_unlock() invocations in the code above, you would need to let
> >> >> >> > lockdep know by adding rcu_read_lock_bh_held().  So instead of this:
> >> >> >> >
> >> >> >> > 	p = rcu_dereference(gp);
> >> >> >> >
> >> >> >> > You would do this:
> >> >> >> >
> >> >> >> > 	p = rcu_dereference_check(gp, rcu_read_lock_bh_held());
> >> >> >> >
> >> >> >> > This would be needed for mainline, regardless of -rt.
> >> >> >> 
> >> >> >> OK. And as far as I can tell this is harmless for code paths that call
> >> >> >> the same function but from a regular rcu_read_lock()-protected section
> >> >> >> instead from a bh-disabled section, right?
> >> >> >
> >> >> > That is correct.  That rcu_dereference_check() invocation will make
> >> >> > lockdep be OK with rcu_read_lock() or with softirq being disabled.
> >> >> > Or both, for that matter.
> >> >> 
> >> >> OK, great, thank you for confirming my understanding!
> >> >> 
> >> >> >> What happens, BTW, if we *don't* get rid of all the existing
> >> >> >> rcu_read_lock() sections? Going back to your foo() example above, what
> >> >> >> we're discussing is whether to add that second rcu_read_lock() around
> >> >> >> do_some_other_thing(p). I.e., the first one around the rcu_dereference()
> >> >> >> is already there (in the particular driver we're discussing), and the
> >> >> >> local_bh_disable/enable() pair is already there. AFAICT from our
> >> >> >> discussion, there really is not much point in adding that second
> >> >> >> rcu_read_lock/unlock(), is there?
> >> >> >
> >> >> > From an algorithmic point of view, the second rcu_read_lock()
> >> >> > and rcu_read_unlock() are redundant.  Of course, there are also
> >> >> > software-engineering considerations, including copy-pasta issues.
> >> >> >
> >> >> >> And because that first rcu_read_lock() around the rcu_dereference() is
> >> >> >> already there, lockdep is not likely to complain either, so we're
> >> >> >> basically fine? Except that the code is somewhat confusing as-is, of
> >> >> >> course; i.e., we should probably fix it but it's not terribly urgent. Or?
> >> >> >
> >> >> > I am concerned about copy-pasta-induced bugs.  Someone looks just at
> >> >> > the code, fails to note the fact that softirq is disabled throughout,
> >> >> > and decides that leaking a pointer from one RCU read-side critical
> >> >> > section to a later one is just fine.  :-/
> >> >> 
> >> >> Yup, totally agreed that we need to fix this for the sake of the humans
> >> >> reading the code; just wanted to make sure my understanding was correct
> >> >> that we don't strictly need to do anything as far as the machines
> >> >> executing it are concerned :)
> >> >> 
> >> >> >> Hmm, looking at it now, it seems not all the lookup code is actually
> >> >> >> doing rcu_dereference() at all, but rather just a plain READ_ONCE() with
> >> >> >> a comment above it saying that RCU ensures objects won't disappear[0];
> >> >> >> so I suppose we're at least safe from lockdep in that sense :P - but we
> >> >> >> should definitely clean this up.
> >> >> >> 
> >> >> >> [0] Exhibit A: https://elixir.bootlin.com/linux/latest/source/kernel/bpf/devmap.c#L391
> >> >> >
> >> >> > That use of READ_ONCE() will definitely avoid lockdep complaints,
> >> >> > including those complaints that point out bugs.  It also might get you
> >> >> > sparse complaints if the RCU-protected pointer is marked with __rcu.
> >> >> 
> >> >> It's not; it's the netdev_map member of this struct:
> >> >> 
> >> >> struct bpf_dtab {
> >> >> 	struct bpf_map map;
> >> >> 	struct bpf_dtab_netdev **netdev_map; /* DEVMAP type only */
> >> >> 	struct list_head list;
> >> >> 
> >> >> 	/* these are only used for DEVMAP_HASH type maps */
> >> >> 	struct hlist_head *dev_index_head;
> >> >> 	spinlock_t index_lock;
> >> >> 	unsigned int items;
> >> >> 	u32 n_buckets;
> >> >> };
> >> >> 
> >> >> Will adding __rcu to such a dynamic array member do the right thing when
> >> >> paired with rcu_dereference() on array members (i.e., in place of the
> >> >> READ_ONCE in the code linked above)?
> >> >
> >> > The only thing __rcu will do is provide information to the sparse static
> >> > analysis tool.  Which will then gripe at you for applying READ_ONCE()
> >> > to a __rcu pointer.  But it is already griping at you for applying
> >> > rcu_dereference() to something not marked __rcu, so...  ;-)
> >> 
> >> Right, hence the need for a cleanup ;)
> >> 
> >> My question was more if it understood arrays, though. I.e., that
> >> 'netdev_map' is an array of RCU pointers, not an RCU pointer to an
> >> array... Or am I maybe thinking that tool is way smarter than it is, and
> >> it just complains for any access to that field that doesn't use
> >> rcu_dereference()?
> >
> > I believe that sparse will know about the pointers being __rcu, but
> > not the array.  Unless you mark both levels.
> 
> Hi Paul
> 
> One more question, since I started adding the annotations: We are
> currently swapping out the pointers using xchg():
> https://elixir.bootlin.com/linux/latest/source/kernel/bpf/devmap.c#L555
> 
> and even cmpxchg():
> https://elixir.bootlin.com/linux/latest/source/kernel/bpf/devmap.c#L831
> 
> Sparse complains about these if I add the __rcu annotation to the
> definition (which otherwise works just fine with the double-pointer,
> BTW). Is there a way to fix that? Some kind of rcu_ macro version of the
> atomic swaps or something? Or do we just keep the regular xchg() and
> ignore those particular sparse warnings?

Sounds like I need to supply a unrcu_pointer() macro or some such.
This would operate something like the current open-coded casts
in __rcu_dereference_protected().

Would something like that work for you?

							Thanx, Paul