From: "Rafał Miłecki" <zajec5@gmail.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: "Nicolas Saenz Julienne" <nsaenzjulienne@suse.de>,
"Maxime Ripard" <maxime@cerno.tech>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Álvaro Fernández Rojas" <noltari@gmail.com>,
"Nathan Chancellor" <nathan@kernel.org>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH] dt-bindings: clock: brcm,iproc-clocks: convert to the json-schema
Date: Wed, 21 Apr 2021 18:39:48 +0200 [thread overview]
Message-ID: <20210421163948.11229-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bindings/clock/brcm,iproc-clocks.txt | 313 --------------
.../bindings/clock/brcm,iproc-clocks.yaml | 397 ++++++++++++++++++
2 files changed, 397 insertions(+), 313 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
create mode 100644 Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
deleted file mode 100644
index ab730ea0a560..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ /dev/null
@@ -1,313 +0,0 @@
-Broadcom iProc Family Clocks
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The iProc clock controller manages clocks that are common to the iProc family.
-An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
-LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
-comprises of several leaf clocks
-
-Required properties for a PLL and its leaf clocks:
-
-- compatible:
- Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on
-Cygnus has a compatible string of "brcm,cygnus-genpll"
-
-- #clock-cells:
- Have a value of <1> since there are more than 1 leaf clock of a given PLL
-
-- reg:
- Define the base and range of the I/O address space that contain the iProc
-clock control registers required for the PLL
-
-- clocks:
- The input parent clock phandle for the PLL. For most iProc PLLs, this is an
-onboard crystal with a fixed rate
-
-- clock-output-names:
- An ordered list of strings defining the names of the clocks
-
-Example:
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- genpll: genpll {
- #clock-cells = <1>;
- compatible = "brcm,cygnus-genpll";
- reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
- "enet_sw", "audio_125", "can";
- };
-
-Required properties for ASIU clocks:
-
-ASIU clocks are a special case. These clocks are derived directly from the
-reference clock of the onboard crystal
-
-- compatible:
- Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU
-clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk"
-
-- #clock-cells:
- Have a value of <1> since there are more than 1 ASIU clocks
-
-- reg:
- Define the base and range of the I/O address space that contain the iProc
-clock control registers required for ASIU clocks
-
-- clocks:
- The input parent clock phandle for the ASIU clock, i.e., the onboard
-crystal
-
-- clock-output-names:
- An ordered list of strings defining the names of the ASIU clocks
-
-Example:
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- asiu_clks: asiu_clks {
- #clock-cells = <1>;
- compatible = "brcm,cygnus-asiu-clk";
- reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
- clocks = <&osc>;
- clock-output-names = "keypad", "adc/touch", "pwm";
- };
-
-Cygnus
-------
-PLL and leaf clock compatible strings for Cygnus are:
- "brcm,cygnus-armpll"
- "brcm,cygnus-genpll"
- "brcm,cygnus-lcpll0"
- "brcm,cygnus-mipipll"
- "brcm,cygnus-asiu-clk"
- "brcm,cygnus-audiopll"
-
-The following table defines the set of PLL/clock index and ID for Cygnus.
-These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-cygnus.h"
-
- Clock Source (Parent) Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- armpll crystal N/A N/A
-
- keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
- adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
- pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
-
- genpll crystal 0 BCM_CYGNUS_GENPLL
- axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
- 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
- ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
- enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
- audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
- can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
-
- lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
- pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
- ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
- sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
- usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
- smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
- ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
-
- mipipll crystal 0 BCM_CYGNUS_MIPIPLL
- ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
- ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
- ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
- ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
- ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
- ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
-
- audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
- ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
- ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
- ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
-
-Hurricane 2
-------
-PLL and leaf clock compatible strings for Hurricane 2 are:
- "brcm,hr2-armpll"
-
-The following table defines the set of PLL/clock for Hurricane 2:
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- armpll crystal N/A N/A
-
-
-Northstar and Northstar Plus
-------
-PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
- "brcm,nsp-armpll"
- "brcm,nsp-genpll"
- "brcm,nsp-lcpll0"
-
-The following table defines the set of PLL/clock index and ID for Northstar and
-Northstar Plus. These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-nsp.h"
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- armpll crystal N/A N/A
-
- genpll crystal 0 BCM_NSP_GENPLL
- phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
- ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
- usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
- iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
- sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
- sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
-
- lcpll0 crystal 0 BCM_NSP_LCPLL0
- pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
- sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
- ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
-
-Northstar 2
------------
-PLL and leaf clock compatible strings for Northstar 2 are:
- "brcm,ns2-genpll-scr"
- "brcm,ns2-genpll-sw"
- "brcm,ns2-lcpll-ddr"
- "brcm,ns2-lcpll-ports"
-
-The following table defines the set of PLL/clock index and ID for Northstar 2.
-These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-ns2.h"
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
- scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
- fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
- audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
- ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
- ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
- ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
-
- genpll_sw crystal 0 BCM_NS2_GENPLL_SW
- rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
- 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
- nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
- chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
- port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
- sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
-
- lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
- pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
- ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
- ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
- ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
- ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
- ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
-
- lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
- wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
- rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
- ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
- ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
- ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
- ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
-
-BCM63138
---------
-PLL and leaf clock compatible strings for BCM63138 are:
- "brcm,bcm63138-armpll"
-
-Stingray
------------
-PLL and leaf clock compatible strings for Stingray are:
- "brcm,sr-genpll0"
- "brcm,sr-genpll1"
- "brcm,sr-genpll2"
- "brcm,sr-genpll3"
- "brcm,sr-genpll4"
- "brcm,sr-genpll5"
- "brcm,sr-genpll6"
-
- "brcm,sr-lcpll0"
- "brcm,sr-lcpll1"
- "brcm,sr-lcpll-pcie"
-
-
-The following table defines the set of PLL/clock index and ID for Stingray.
-These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-sr.h"
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
- crmu_ref25m crystal N/A N/A
-
- genpll0 crystal 0 BCM_SR_GENPLL0
- clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
- clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
- clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
- clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
- clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
- clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
-
- genpll1 crystal 0 BCM_SR_GENPLL1
- clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
- clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
-
- genpll2 crystal 0 BCM_SR_GENPLL2
- clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
- clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
- clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
- clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
- clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK
- clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK
-
- genpll3 crystal 0 BCM_SR_GENPLL3
- clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
- clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
-
- genpll4 crystal 0 BCM_SR_GENPLL4
- clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
- clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
- clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK
- clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
- clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
-
- genpll5 crystal 0 BCM_SR_GENPLL5
- clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
- clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
- clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
-
- genpll6 crystal 0 BCM_SR_GENPLL6
- clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
-
- lcpll0 crystal 0 BCM_SR_LCPLL0
- clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
- clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
- clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK
- clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK
-
- lcpll1 crystal 0 BCM_SR_LCPLL1
- clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK
- clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK
- clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK
-
- lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
- clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
new file mode 100644
index 000000000000..8aa504bb2958
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@@ -0,0 +1,397 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc Family Clocks
+
+maintainers:
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+description: |
+ This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ The iProc clock controller manages clocks that are common to the iProc family.
+ An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
+ LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+ comprises of several leaf clocks
+
+ ASIU clocks are a special case. These clocks are derived directly from the
+ reference clock of the onboard crystal.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm63138-armpll
+ - brcm,cygnus-armpll
+ - brcm,cygnus-genpll
+ - brcm,cygnus-lcpll0
+ - brcm,cygnus-mipipll
+ - brcm,cygnus-asiu-clk
+ - brcm,cygnus-audiopll
+ - brcm,hr2-armpll
+ - brcm,nsp-armpll
+ - brcm,nsp-genpll
+ - brcm,nsp-lcpll0
+ - brcm,ns2-genpll-scr
+ - brcm,ns2-genpll-sw
+ - brcm,ns2-lcpll-ddr
+ - brcm,ns2-lcpll-ports
+ - brcm,sr-genpll0
+ - brcm,sr-genpll1
+ - brcm,sr-genpll2
+ - brcm,sr-genpll3
+ - brcm,sr-genpll4
+ - brcm,sr-genpll5
+ - brcm,sr-genpll6
+ - brcm,sr-lcpll0
+ - brcm,sr-lcpll1
+ - brcm,sr-lcpll-pcie
+
+ reg:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: base register
+ - description: power register
+ - description: ASIU or split status register
+
+ clocks:
+ description: The input parent clock phandle for the PLL / ASIU clock. For
+ most iProc PLLs, this is an onboard crystal with a fixed rate.
+ minItems: 1
+ maxItems: 45
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names: true
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,cygnus-armpll
+ - brcm,cygnus-genpll
+ - brcm,cygnus-lcpll0
+ - brcm,cygnus-mipipll
+ - brcm,cygnus-asiu-clk
+ - brcm,cygnus-audiopll
+ then:
+ properties:
+ clocks:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Cygnus.
+ These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-cygnus.h"
+
+ Clock Source (Parent) Index ID
+ ----- --------------- ----- --
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
+ adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
+ pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
+
+ genpll crystal 0 BCM_CYGNUS_GENPLL
+ axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
+ 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
+ ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+ enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
+ audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+ can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
+
+ lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
+ pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+ ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+ sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
+ usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+ smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+ ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+ mipipll crystal 0 BCM_CYGNUS_MIPIPLL
+ ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+ ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
+ ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
+ ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+ ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+ ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+ audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
+ ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
+ ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
+ ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,hr2-armpll
+ then:
+ properties:
+ clocks:
+ description: |
+ The following table defines the set of PLL/clock for Hurricane 2:
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,nsp-armpll
+ - brcm,nsp-genpll
+ - brcm,nsp-lcpll0
+ then:
+ properties:
+ clocks:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Northstar and
+ Northstar Plus. These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-nsp.h"
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ genpll crystal 0 BCM_NSP_GENPLL
+ phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
+ ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
+ usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
+ iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
+ sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
+ sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
+
+ lcpll0 crystal 0 BCM_NSP_LCPLL0
+ pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+ sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
+ ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,ns2-genpll-scr
+ - brcm,ns2-genpll-sw
+ - brcm,ns2-lcpll-ddr
+ - brcm,ns2-lcpll-ports
+ then:
+ properties:
+ clocks:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Northstar 2.
+ These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-ns2.h"
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+
+ genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
+ scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
+ fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
+ audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
+ ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
+ ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
+ ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+ genpll_sw crystal 0 BCM_NS2_GENPLL_SW
+ rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
+ 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
+ nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
+ chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
+ port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
+ sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
+
+ lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
+ pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+ ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
+ ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
+ ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
+ ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
+ ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+ lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
+ wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
+ rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
+ ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+ ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+ ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+ ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,sr-genpll0
+ - brcm,sr-genpll1
+ - brcm,sr-genpll2
+ - brcm,sr-genpll3
+ - brcm,sr-genpll4
+ - brcm,sr-genpll5
+ - brcm,sr-genpll6
+ - brcm,sr-lcpll0
+ - brcm,sr-lcpll1
+ - brcm,sr-lcpll-pcie
+ then:
+ properties:
+ clocks:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Stingray.
+ These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-sr.h"
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+ crmu_ref25m crystal N/A N/A
+
+ genpll0 crystal 0 BCM_SR_GENPLL0
+ clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
+ clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
+ clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
+ clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
+ clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+ clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+ genpll1 crystal 0 BCM_SR_GENPLL1
+ clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
+ clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
+
+ genpll2 crystal 0 BCM_SR_GENPLL2
+ clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
+ clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
+ clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
+ clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
+ clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK
+ clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK
+
+ genpll3 crystal 0 BCM_SR_GENPLL3
+ clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
+ clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
+
+ genpll4 crystal 0 BCM_SR_GENPLL4
+ clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
+ clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
+ clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK
+ clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
+ clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+ genpll5 crystal 0 BCM_SR_GENPLL5
+ clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
+ clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
+ clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
+
+ genpll6 crystal 0 BCM_SR_GENPLL6
+ clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
+
+ lcpll0 crystal 0 BCM_SR_LCPLL0
+ clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
+ clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
+ clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK
+ clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK
+
+ lcpll1 crystal 0 BCM_SR_LCPLL1
+ clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK
+ clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK
+ clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK
+
+ lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
+ clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,cygnus-genpll
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: genpll
+ - const: axi21
+ - const: 250mhz
+ - const: ihost_sys
+ - const: enet_sw
+ - const: audio_125
+ - const: can
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,nsp-lcpll0
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: lcpll0
+ - const: pcie_phy
+ - const: sdio
+ - const: ddr_phy
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,nsp-genpll
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: genpll
+ - const: phy
+ - const: ethernetclk
+ - const: usbclk
+ - const: iprocfast
+ - const: sata1
+ - const: sata2
+
+required:
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ osc1: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ genpll@301d000 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x301d000 0x2c>, <0x301c020 0x4>;
+ clocks = <&os1c>;
+ clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
+ };
+ - |
+ osc2: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ asiu_clks@301d048 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x301d048 0xc>, <0x180aa024 0x4>;
+ clocks = <&osc2>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
+ };
--
2.26.2
next reply other threads:[~2021-04-21 16:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-21 16:39 Rafał Miłecki [this message]
2021-04-21 16:56 ` [PATCH V2] dt-bindings: clock: brcm,iproc-clocks: convert to the json-schema Rafał Miłecki
2021-04-23 18:14 ` Rob Herring
2021-04-24 20:23 ` [PATCH V3] " Rafał Miłecki
2021-05-07 4:12 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210421163948.11229-1-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=maxime@cerno.tech \
--cc=mturquette@baylibre.com \
--cc=nathan@kernel.org \
--cc=noltari@gmail.com \
--cc=nsaenzjulienne@suse.de \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.