[PATCH 2/6] oeqa/manual/bsp-hw.json : remove ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP manual test

["Teoh, Jay Shen" <jay.shen.teoh@intel.com>]

From: Teoh Jay Shen <jay.shen.teoh@intel.com>

Remove ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP test as they was replaced by the new automated runtime oeqa/runtime/cases/ethernet_ip_connman.py.

Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
---
 meta/lib/oeqa/manual/bsp-hw.json | 64 --------------------------------
 1 file changed, 64 deletions(-)

diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json
index 5c3719f093..0c13d116d6 100644
--- a/meta/lib/oeqa/manual/bsp-hw.json
+++ b/meta/lib/oeqa/manual/bsp-hw.json
@@ -89,70 +89,6 @@
             "summary": "switch_among_multi_applications_and_desktop"
         }
     },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "Boot the system and check internet connection is on . ",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "Launch connmand-properties (up-right corner on desktop)",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "Choose  Ethernet device and set a valid static ip address for it. \nFor example, in our internal network, we can set as following: \nip address: 10.239.48.xxx \nMask: 255.255.255.0 \nGateway (Broadcast): 10.239.48.255",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "Check the Network configuration with \"ifconfig\"",
-                    "expected_results": "Static IP was set successfully  \n"
-                },
-                "5": {
-                    "action": "ping to another IP adress",
-                    "expected_results": "Ping works correclty\n"
-                }
-            },
-            "summary": "ethernet_static_ip_set_in_connman"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "Launch connmand-properties (up-right corner on your desktop). ",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "Check if Ethernet device can work properly with static IP, doing \"ping XXX.XXX.XXX.XXX\", once this is set.",
-                    "expected_results": "Ping executed successfully .  \n\n"
-                },
-                "3": {
-                    "action": "Then choose DHCP method for Ethernet device in connmand-properties.",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "Check with 'ifconfig\" and \"ping\" if Ethernet device get IP address via DHCP.",
-                    "expected_results": "Ethernet device can get dynamic IP address via DHCP in connmand ."
-                }
-            },
-            "summary": "ethernet_get_IP_in_connman_via_DHCP"
-        }
-    },
     {
         "test": {
             "@alias": "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome",
-- 
2.29.0