All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	linux-kernel@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	"Phong Hoang" <phong.hoang.wz@renesas.com>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH] clocksource: sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
Date: Thu, 22 Apr 2021 14:34:43 +0200	[thread overview]
Message-ID: <20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se> (raw)

From: Phong Hoang <phong.hoang.wz@renesas.com>

If CMT instance has at least two channels, one channel will be used
as a clock source and another one used as a clock event device.
In that case, IRQ is not requested for clock source channel so
sh_cmt_clock_event_program_verify() might work incorrectly.
Besides, when a channel is only used for clock source, don't need to
re-set the next match_value since it should be maximum timeout as
it still is.

On the other hand, due to no IRQ, total_cycles is not counted up
when reaches compare match time (timer counter resets to zero),
so sh_cmt_clocksource_read() returns unexpected value.
Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants
will also lead to wrong delta calculation. Hence, this mask should
correspond to timer counter width, and above function just returns
the raw value of timer counter register.

Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/clocksource/sh_cmt.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index c98f8851fd680454..cadd09ad1a0946b9 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -578,7 +578,8 @@ static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
 	ch->flags |= flag;
 
 	/* setup timeout if no clockevent */
-	if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
+	if (ch->cmt->num_channels == 1 &&
+	    flag == FLAG_CLOCKSOURCE && (!(ch->flags & FLAG_CLOCKEVENT)))
 		__sh_cmt_set_next(ch, ch->max_match_value);
  out:
 	raw_spin_unlock_irqrestore(&ch->lock, flags);
@@ -620,20 +621,25 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
 static u64 sh_cmt_clocksource_read(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
-	unsigned long flags;
 	u32 has_wrapped;
-	u64 value;
-	u32 raw;
 
-	raw_spin_lock_irqsave(&ch->lock, flags);
-	value = ch->total_cycles;
-	raw = sh_cmt_get_counter(ch, &has_wrapped);
+	if (ch->cmt->num_channels == 1) {
+		unsigned long flags;
+		u64 value;
+		u32 raw;
 
-	if (unlikely(has_wrapped))
-		raw += ch->match_value + 1;
-	raw_spin_unlock_irqrestore(&ch->lock, flags);
+		raw_spin_lock_irqsave(&ch->lock, flags);
+		value = ch->total_cycles;
+		raw = sh_cmt_get_counter(ch, &has_wrapped);
 
-	return value + raw;
+		if (unlikely(has_wrapped))
+			raw += ch->match_value + 1;
+		raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+		return value + raw;
+	}
+
+	return sh_cmt_get_counter(ch, &has_wrapped);
 }
 
 static int sh_cmt_clocksource_enable(struct clocksource *cs)
@@ -696,7 +702,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
 	cs->disable = sh_cmt_clocksource_disable;
 	cs->suspend = sh_cmt_clocksource_suspend;
 	cs->resume = sh_cmt_clocksource_resume;
-	cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
+	cs->mask = CLOCKSOURCE_MASK(ch->cmt->info->width);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
 	dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
-- 
2.31.1


             reply	other threads:[~2021-04-22 12:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-22 12:34 Niklas Söderlund [this message]
2021-06-10 12:45 ` Daniel Lezcano
2021-06-11  7:56   ` Niklas Söderlund
2021-08-11 14:06     ` Wolfram Sang
2021-08-26 16:25 ` [tip: timers/core] clocksource/drivers/sh_cmt: " tip-bot2 for Phong Hoang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=phong.hoang.wz@renesas.com \
    --cc=wsa+renesas@sang-engineering.com \
    --subject='Re: [PATCH] clocksource: sh_cmt: Fix wrong setting if don'\''t request IRQ for clock source channel' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.