All of lore.kernel.org
 help / color / mirror / Atom feed
From: <Ajay.Kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: <Claudiu.Beznea@microchip.com>, <Ajay.Kathat@microchip.com>
Subject: [PATCH 04/12] wilc1000: setup registers to support chip wakeup sequence
Date: Fri, 23 Apr 2021 18:29:44 +0000	[thread overview]
Message-ID: <20210423182925.5865-5-ajay.kathat@microchip.com> (raw)
In-Reply-To: <20210423182925.5865-1-ajay.kathat@microchip.com>

From: Ajay Singh <ajay.kathat@microchip.com>

Configure required register for WILC1000 wakeup sequence out of sleep
for SPI and SDIO module.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 .../wireless/microchip/wilc1000/cfg80211.c    |  1 -
 .../net/wireless/microchip/wilc1000/netdev.h  |  1 -
 .../net/wireless/microchip/wilc1000/wlan.c    | 98 ++++++++++---------
 .../net/wireless/microchip/wilc1000/wlan.h    |  2 +
 .../net/wireless/microchip/wilc1000/wlan_if.h |  6 --
 5 files changed, 53 insertions(+), 55 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index 75160ab3914a..91a471f3b1c8 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1726,7 +1726,6 @@ int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 	*wilc = wl;
 	wl->io_type = io_type;
 	wl->hif_func = ops;
-	wl->chip_ps_state = WILC_CHIP_WAKEDUP;
 
 	for (i = 0; i < NQUEUES; i++)
 		INIT_LIST_HEAD(&wl->txq[i].txq_head.list);
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.h b/drivers/net/wireless/microchip/wilc1000/netdev.h
index a39c62a20f04..79f73a72da57 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.h
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.h
@@ -265,7 +265,6 @@ struct wilc {
 	bool suspend_event;
 
 	struct workqueue_struct *hif_workqueue;
-	enum chip_ps_states chip_ps_state;
 	struct wilc_cfg cfg;
 	void *bus_data;
 	struct net_device *monitor_dev;
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 2030fc7f53ca..177e42a9a603 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -10,6 +10,8 @@
 #include "cfg80211.h"
 #include "wlan_cfg.h"
 
+#define WAKE_UP_TRIAL_RETRY		10000
+
 static inline bool is_wilc1000(u32 id)
 {
 	return (id & (~WILC_CHIP_REV_FIELD)) == WILC_1000_BASE_ID;
@@ -611,60 +613,62 @@ EXPORT_SYMBOL_GPL(chip_allow_sleep);
 
 void chip_wakeup(struct wilc *wilc)
 {
-	u32 reg, clk_status_reg;
-	const struct wilc_hif_func *h = wilc->hif_func;
-
-	if (wilc->io_type == WILC_HIF_SPI) {
-		do {
-			h->hif_read_reg(wilc, WILC_SPI_WAKEUP_REG, &reg);
-			h->hif_write_reg(wilc, WILC_SPI_WAKEUP_REG,
-					 reg | WILC_SPI_WAKEUP_BIT);
-			h->hif_write_reg(wilc, WILC_SPI_WAKEUP_REG,
-					 reg & ~WILC_SPI_WAKEUP_BIT);
-
-			do {
-				usleep_range(2000, 2500);
-				wilc_get_chipid(wilc, true);
-			} while (wilc_get_chipid(wilc, true) == 0);
-		} while (wilc_get_chipid(wilc, true) == 0);
-	} else if (wilc->io_type == WILC_HIF_SDIO) {
-		h->hif_write_reg(wilc, WILC_SDIO_HOST_TO_FW_REG,
-				 WILC_SDIO_HOST_TO_FW_BIT);
-		usleep_range(200, 400);
-		h->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
-		do {
-			h->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
-					 reg | WILC_SDIO_WAKEUP_BIT);
-			h->hif_read_reg(wilc, WILC_SDIO_CLK_STATUS_REG,
-					&clk_status_reg);
-
-			while (!(clk_status_reg & WILC_SDIO_CLK_STATUS_BIT)) {
-				usleep_range(2000, 2500);
+	u32 ret = 0;
+	u32 clk_status_val = 0, trials = 0;
+	u32 wakeup_reg, wakeup_bit;
+	u32 clk_status_reg, clk_status_bit;
+	u32 to_host_from_fw_reg, to_host_from_fw_bit;
+	u32 from_host_to_fw_reg, from_host_to_fw_bit;
+	const struct wilc_hif_func *hif_func = wilc->hif_func;
 
-				h->hif_read_reg(wilc, WILC_SDIO_CLK_STATUS_REG,
-						&clk_status_reg);
-			}
-			if (!(clk_status_reg & WILC_SDIO_CLK_STATUS_BIT)) {
-				h->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
-						 reg & ~WILC_SDIO_WAKEUP_BIT);
-			}
-		} while (!(clk_status_reg & WILC_SDIO_CLK_STATUS_BIT));
+	if (wilc->io_type == WILC_HIF_SDIO) {
+		wakeup_reg = WILC_SDIO_WAKEUP_REG;
+		wakeup_bit = WILC_SDIO_WAKEUP_BIT;
+		clk_status_reg = WILC_SDIO_CLK_STATUS_REG;
+		clk_status_bit = WILC_SDIO_CLK_STATUS_BIT;
+		from_host_to_fw_reg = WILC_SDIO_HOST_TO_FW_REG;
+		from_host_to_fw_bit = WILC_SDIO_HOST_TO_FW_BIT;
+		to_host_from_fw_reg = WILC_SDIO_FW_TO_HOST_REG;
+		to_host_from_fw_bit = WILC_SDIO_FW_TO_HOST_BIT;
+	} else {
+		wakeup_reg = WILC_SPI_WAKEUP_REG;
+		wakeup_bit = WILC_SPI_WAKEUP_BIT;
+		clk_status_reg = WILC_SPI_CLK_STATUS_REG;
+		clk_status_bit = WILC_SPI_CLK_STATUS_BIT;
+		from_host_to_fw_reg = WILC_SPI_HOST_TO_FW_REG;
+		from_host_to_fw_bit = WILC_SPI_HOST_TO_FW_BIT;
+		to_host_from_fw_reg = WILC_SPI_FW_TO_HOST_REG;
+		to_host_from_fw_bit = WILC_SPI_FW_TO_HOST_BIT;
 	}
 
-	if (wilc->chip_ps_state == WILC_CHIP_SLEEPING_MANUAL) {
-		if (wilc_get_chipid(wilc, false) < WILC_1000_BASE_ID_2B) {
-			u32 val32;
+	/* indicate host wakeup */
+	ret = hif_func->hif_write_reg(wilc, from_host_to_fw_reg,
+				      from_host_to_fw_bit);
+	if (ret)
+		return;
 
-			h->hif_read_reg(wilc, WILC_REG_4_TO_1_RX, &val32);
-			val32 |= BIT(6);
-			h->hif_write_reg(wilc, WILC_REG_4_TO_1_RX, val32);
+	/* Set wake-up bit */
+	ret = hif_func->hif_write_reg(wilc, wakeup_reg,
+				      wakeup_bit);
+	if (ret)
+		return;
 
-			h->hif_read_reg(wilc, WILC_REG_4_TO_1_TX_BANK0, &val32);
-			val32 |= BIT(6);
-			h->hif_write_reg(wilc, WILC_REG_4_TO_1_TX_BANK0, val32);
+	while (trials < WAKE_UP_TRIAL_RETRY) {
+		ret = hif_func->hif_read_reg(wilc, clk_status_reg,
+					     &clk_status_val);
+		if (ret) {
+			pr_err("Bus error %d %x\n", ret, clk_status_val);
+			return;
 		}
+		if (clk_status_val & clk_status_bit)
+			break;
+
+		trials++;
+	}
+	if (trials >= WAKE_UP_TRIAL_RETRY) {
+		pr_err("Failed to wake-up the chip\n");
+		return;
 	}
-	wilc->chip_ps_state = WILC_CHIP_WAKEDUP;
 }
 EXPORT_SYMBOL_GPL(chip_wakeup);
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 771c25fa849b..285e5d9a2b48 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -97,6 +97,8 @@
 #define WILC_SPI_WAKEUP_REG		0x1
 #define WILC_SPI_WAKEUP_BIT		BIT(1)
 
+#define WILC_SPI_CLK_STATUS_REG        0x0f
+#define WILC_SPI_CLK_STATUS_BIT        BIT(2)
 #define WILC_SPI_HOST_TO_FW_REG		0x0b
 #define WILC_SPI_HOST_TO_FW_BIT		BIT(0)
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan_if.h b/drivers/net/wireless/microchip/wilc1000/wlan_if.h
index 31c68643731d..6eb7eb4ac294 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan_if.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan_if.h
@@ -48,12 +48,6 @@ enum {
 	WILC_FW_MAX_PSPOLL_PS = 4
 };
 
-enum chip_ps_states {
-	WILC_CHIP_WAKEDUP = 0,
-	WILC_CHIP_SLEEPING_AUTO = 1,
-	WILC_CHIP_SLEEPING_MANUAL = 2
-};
-
 enum bus_acquire {
 	WILC_BUS_ACQUIRE_ONLY = 0,
 	WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
-- 
2.24.0

  parent reply	other threads:[~2021-04-23 18:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-23 18:29 [PATCH 00/12] wilc1000: added chip wakeup support and few fixes Ajay.Kathat
2021-04-23 18:29 ` [PATCH 02/12] wilc1000: fix possible memory leak in cfg_scan_result() Ajay.Kathat
2021-04-23 18:29 ` [PATCH 01/12] wilc1000: move 'deinit_lock' lock init/destory inside module probe Ajay.Kathat
2021-06-24  5:43   ` Ajay.Kathat
2021-06-24  5:55     ` Kalle Valo
2021-04-23 18:29 ` [PATCH 03/12] wilc1000: added new WID to pass WOW info to firmware Ajay.Kathat
2021-06-24  9:25   ` Kalle Valo
2021-06-24 11:00     ` Ajay.Kathat
2021-04-23 18:29 ` Ajay.Kathat [this message]
2021-06-24  9:27   ` [PATCH 04/12] wilc1000: setup registers to support chip wakeup sequence Kalle Valo
2021-04-23 18:29 ` [PATCH 05/12] wilc1000: add reset/terminate/repeat command support for SPI bus Ajay.Kathat
2021-06-24  9:28   ` Kalle Valo
2021-04-23 18:29 ` [PATCH 06/12] wilc1000: handle register read fail issue " Ajay.Kathat
2021-04-23 18:29 ` [PATCH 07/12] wilc1000: ignore error response for SPI clockless registers Ajay.Kathat
2021-04-23 18:29 ` [PATCH 08/12] wilc1000: invoke chip reset register while FW download Ajay.Kathat
2021-06-24  9:32   ` Kalle Valo
2021-04-23 18:29 ` [PATCH 09/12] wilc1000: avoid 'isinit' static by moving inside priv data Ajay.Kathat
2021-06-24  9:40   ` Kalle Valo
2021-04-23 18:29 ` [PATCH 11/12] wilc1000: use write command after read in wilc_spi_sync_ext() Ajay.Kathat
2021-06-24  9:42   ` Kalle Valo
2021-04-23 18:29 ` [PATCH 10/12] wilc1000: added initialized variable check before processing Ajay.Kathat
2021-06-24  9:41   ` Kalle Valo
2021-04-23 18:29 ` [PATCH 12/12] wilc1000: increase WILC_CFG_PKTS_TIMEOUT timeout value Ajay.Kathat
2021-06-24  9:42   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210423182925.5865-5-ajay.kathat@microchip.com \
    --to=ajay.kathat@microchip.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.