On 25.04.2021 14:22:12, Erik Flodin wrote: > Before this fix, the function and userdata columns weren't aligned: > device can_id can_mask function userdata matches ident > vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw > vcan0 123 00000123 0000000000000000 0000000000000000 0 raw > > After the fix they are: > device can_id can_mask function userdata matches ident > vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw > vcan0 123 00000123 0000000000000000 0000000000000000 0 raw > > Signed-off-by: Erik Flodin > --- > net/can/proc.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/net/can/proc.c b/net/can/proc.c > index 5ea8695f507e..35b6c7512785 100644 > --- a/net/can/proc.c > +++ b/net/can/proc.c > @@ -205,8 +205,11 @@ static void can_print_recv_banner(struct seq_file *m) > * can1. 00000000 00000000 00000000 > * ....... 0 tp20 > */ > - seq_puts(m, " device can_id can_mask function" > - " userdata matches ident\n"); > +#ifdef CONFIG_64BIT > + seq_puts(m, " device can_id can_mask function userdata matches ident\n"); > +#else > + seq_puts(m, " device can_id can_mask function userdata matches ident\n"); > +#endif Please use "if (IS_ENABLED(CONFIG_64BIT))" as in your example in your previous mail. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |