Re: [RFC PATCH 1/4] dt-bindings: iio: accel: fxls8962af: add interrupt options

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Wed, 28 Apr 2021 10:22:00 +0200
Sean Nyekjaer <sean@geanix.com> wrote:

> This in done for supporting hw buffered sampling
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>

Please squash into the original binding patch.
Bindings should reflect the hardware features rather than what the driver
happens to be currently taking advantage of.

Occasionally we'll do it in multiple parts because we aren't sure what
the binding will look like, but in this case you've posted this before
the other has been applied so just merge them together.

Thanks,

Jonathan

> ---
> This series depends on "iio: accel: add support for
> FXLS8962AF/FXLS8964AF accelerometers"
> 
>  .../bindings/iio/accel/nxp,fxls8962af.yaml           | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> index c7be7a1679ab..e0e5542377df 100644
> --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> @@ -32,6 +32,16 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  interrupt-names:
> +    maxItems: 1
> +    items:
> +      enum:
> +        - INT1
> +        - INT2
> +
> +  drive-open-drain:
> +    type: boolean
> +
>  required:
>    - compatible
>    - reg
> @@ -51,6 +61,7 @@ examples:
>              reg = <0x62>;
>              interrupt-parent = <&gpio0>;
>              interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "INT1";
>          };
>      };
>    - |
> @@ -66,5 +77,6 @@ examples:
>              spi-max-frequency = <4000000>;
>              interrupt-parent = <&gpio0>;
>              interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "INT1";
>          };
>      };