All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Robert Marko <robert.marko@sartura.hr>
Cc: jdelvare@suse.com, corbet@lwn.net, linux-hwmon@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 1/2] hwmon: lm75: Add TI TMP1075 support
Date: Mon, 3 May 2021 08:40:15 -0700	[thread overview]
Message-ID: <20210503154015.GA707775@roeck-us.net> (raw)
In-Reply-To: <20210429121150.106804-1-robert.marko@sartura.hr>

On Thu, Apr 29, 2021 at 02:11:49PM +0200, Robert Marko wrote:
> TI TMP1075 is a LM75 compatible sensor, so lets
> add support for it.
> 
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  Documentation/hwmon/lm75.rst |  6 ++++--
>  drivers/hwmon/lm75.c         | 13 +++++++++++++
>  2 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst
> index 81257d5fc48f..8d0ab4ad5fb5 100644
> --- a/Documentation/hwmon/lm75.rst
> +++ b/Documentation/hwmon/lm75.rst
> @@ -93,9 +93,9 @@ Supported chips:
>  
>  	       https://www.st.com/resource/en/datasheet/stlm75.pdf
>  
> -  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275
> +  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275, TMP1075
>  
> -    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275'
> +    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275', 'tmp1075'
>  
>      Addresses scanned: none
>  
> @@ -119,6 +119,8 @@ Supported chips:
>  
>  	       https://www.ti.com/product/tmp275
>  
> +         https://www.ti.com/product/TMP1075
> +
>    * NXP LM75B, PCT2075
>  
>      Prefix: 'lm75b', 'pct2075'
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index e447febd121a..afdbb63237b9 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -50,6 +50,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
>  	tmp75,
>  	tmp75b,
>  	tmp75c,
> +	tmp1075,
>  };
>  
>  /**
> @@ -293,6 +294,13 @@ static const struct lm75_params device_params[] = {
>  		.clr_mask = 1 << 5,	/*not one-shot mode*/
>  		.default_resolution = 12,
>  		.default_sample_time = MSEC_PER_SEC / 12,
> +	},
> +	[tmp1075] = { /* not one-shot mode, 27.5 ms sample rate */
> +		.clr_mask = 1 << 5 | 1 << 6 | 1 << 7,
> +		.default_resolution = 12,
> +		.default_sample_time = 28,
> +		.num_sample_times = 4,
> +		.sample_times = (unsigned int []){ 28, 55, 110, 220 },
>  	}
>  };
>  
> @@ -662,6 +670,7 @@ static const struct i2c_device_id lm75_ids[] = {
>  	{ "tmp75", tmp75, },
>  	{ "tmp75b", tmp75b, },
>  	{ "tmp75c", tmp75c, },
> +	{ "tmp1075", tmp1075, },
>  	{ /* LIST END */ }
>  };
>  MODULE_DEVICE_TABLE(i2c, lm75_ids);
> @@ -771,6 +780,10 @@ static const struct of_device_id __maybe_unused lm75_of_match[] = {
>  		.compatible = "ti,tmp75c",
>  		.data = (void *)tmp75c
>  	},
> +	{
> +		.compatible = "ti,tmp1075",
> +		.data = (void *)tmp1075
> +	},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, lm75_of_match);

      parent reply	other threads:[~2021-05-03 15:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-29 12:11 [PATCH 1/2] hwmon: lm75: Add TI TMP1075 support Robert Marko
2021-04-29 12:11 ` [PATCH 2/2] dt-bindings: hwmon: Add Texas Instruments TMP1075 Robert Marko
2021-05-03 15:41   ` Guenter Roeck
2021-05-03 19:37   ` Rob Herring
2021-05-03 15:40 ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210503154015.GA707775@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robert.marko@sartura.hr \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.