[PATCH 6/7] dt-bindings: imx6q-pcie: add compatibles for i.MX8MM PCIe

[Lucas Stach <l.stach@pengutronix.de>]

This adds compatibles for both the PCIe host controller and PCIe
PHY found on the i.MX8MM SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 3ebd8553a818..f1f5651031a5 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -10,6 +10,7 @@ Required properties:
 	- "fsl,imx6qp-pcie"
 	- "fsl,imx7d-pcie"
 	- "fsl,imx8mq-pcie"
+	- "fsl,imx8mm-pcie"
 - reg: base address and length of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
@@ -90,12 +91,13 @@ Example:
 		clock-names = "pcie", "pcie_bus", "pcie_phy";
 	};
 
-* Freescale i.MX7d PCIe PHY
+* Freescale i.MX PCIe PHY
 
-This is the PHY associated with the IMX7d PCIe controller.  It's looked up by
-the PCI-e controller via the fsl,imx7d-pcie-phy compatible.
+This is the PHY associated with the IMX PCIe controller.  It's looked up by
+the PCI-e controller via the compatible.
 
 Required properties:
 - compatible:
 	- "fsl,imx7d-pcie-phy"
+	- "fsl,imx8mm-pcie-phy"
 - reg: base address and length of the PCIe PHY controller
-- 
2.29.2