Re: CAN: TX frames marked as RX after the sending socket is closed

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 3572 bytes --]

On 10.05.2021 15:23:02, Torin Cooper-Bennun wrote:
> Why?
> 
> candump.c prints 'RX' if the received frame has no MSG_DONTROUTE flag.
> 
> |	if (msg.msg_flags & MSG_DONTROUTE)
> |		printf ("  TX %s", extra_m_info[frame.flags & 3]);
> |	else
> |		printf ("  RX %s", extra_m_info[frame.flags & 3]);
> 
> In turn, MSG_DONTROUTE is set in net/can/raw.c: raw_rcv():
> 
> |	/* add CAN specific message flags for raw_recvmsg() */
> |	pflags = raw_flags(skb);
> |	*pflags = 0;
> |	if (oskb->sk)
> |		*pflags |= MSG_DONTROUTE;
> |	if (oskb->sk == sk)
> |		*pflags |= MSG_CONFIRM;

Without testing, I think you're right here, the MSG_DONTROUTE isn't set
here anymore.

> So, I'm guessing, some 100 ms after my application begins to request
> that the socket be closed, the socket's pointer becomes NULL in further
> TX skbs in the queue, so the raw CAN layer can no longer differentiate
> these skbs as TX. (Sorry if my pathways are a bit mixed up.)

I have a git feeling that I've found the problem. Can you revert
e940e0895a82 ("can: skb: can_skb_set_owner(): fix ref counting if socket
was closed before setting skb ownership") and check if that fixes your
problem? This might trigger the problem described in the patch:

| WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
| refcount_t: addition on 0; use-after-free.
| Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
| CPU: 0 PID: 280 Comm: test_can.sh Tainted: G            E     5.11.0-04577-gf8ff6603c617 #203
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| Backtrace:
| [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
| [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
| [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
| [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
| [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
| [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
| [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
| [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
| [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
| [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
| [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
| [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)

Can you give me feedback if
1. the revert "fixes" your problem
2. the revert triggers the above backtrace

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]