[PATCH AUTOSEL 4.4 1/4] ARM: 9058/1: cache-v7: refactor v7_invalidate_l1 to avoid clobbering r5/r6

[PATCH AUTOSEL 4.4 1/4] ARM: 9058/1: cache-v7: refactor v7_invalidate_l1 to avoid clobbering r5/r6

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit f9e7a99fb6b86aa6a00e53b34ee6973840e005aa ]

The cache invalidation code in v7_invalidate_l1 can be tweaked to
re-read the associativity from CCSIDR, and keep the way identifier
component in a single register that is assigned in the outer loop. This
way, we need 2 registers less.

Given that the number of sets is typically much larger than the
associativity, rearrange the code so that the outer loop has the fewer
number of iterations, ensuring that the re-read of CCSIDR only occurs a
handful of times in practice.

Fix the whitespace while at it, and update the comment to indicate that
this code is no longer a clone of anything else.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/cache-v7.S | 51 +++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 11d699af30ed..db568be45946 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -27,41 +27,40 @@
  * processor.  We fix this by performing an invalidate, rather than a
  * clean + invalidate, before jumping into the kernel.
  *
- * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures.
+ * This function needs to be called for both secondary cores startup and
+ * primary core resume procedures.
  */
 ENTRY(v7_invalidate_l1)
        mov     r0, #0
        mcr     p15, 2, r0, c0, c0, 0
        mrc     p15, 1, r0, c0, c0, 0
 
-       movw    r1, #0x7fff
-       and     r2, r1, r0, lsr #13
+	movw	r3, #0x3ff
+	and	r3, r3, r0, lsr #3	@ 'Associativity' in CCSIDR[12:3]
+	clz	r1, r3			@ WayShift
+	mov	r2, #1
+	mov	r3, r3, lsl r1		@ NumWays-1 shifted into bits [31:...]
+	movs	r1, r2, lsl r1		@ #1 shifted left by same amount
+	moveq	r1, #1			@ r1 needs value > 0 even if only 1 way
 
-       movw    r1, #0x3ff
+	and	r2, r0, #0x7
+	add	r2, r2, #4		@ SetShift
 
-       and     r3, r1, r0, lsr #3      @ NumWays - 1
-       add     r2, r2, #1              @ NumSets
+1:	movw	r4, #0x7fff
+	and	r0, r4, r0, lsr #13	@ 'NumSets' in CCSIDR[27:13]
 
-       and     r0, r0, #0x7
-       add     r0, r0, #4      @ SetShift
-
-       clz     r1, r3          @ WayShift
-       add     r4, r3, #1      @ NumWays
-1:     sub     r2, r2, #1      @ NumSets--
-       mov     r3, r4          @ Temp = NumWays
-2:     subs    r3, r3, #1      @ Temp--
-       mov     r5, r3, lsl r1
-       mov     r6, r2, lsl r0
-       orr     r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-       mcr     p15, 0, r5, c7, c6, 2
-       bgt     2b
-       cmp     r2, #0
-       bgt     1b
-       dsb     st
-       isb
-       ret     lr
+2:	mov	r4, r0, lsl r2		@ NumSet << SetShift
+	orr	r4, r4, r3		@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r4, c7, c6, 2
+	subs	r0, r0, #1		@ Set--
+	bpl	2b
+	subs	r3, r3, r1		@ Way--
+	bcc	3f
+	mrc	p15, 1, r0, c0, c0, 0	@ re-read cache geometry from CCSIDR
+	b	1b
+3:	dsb	st
+	isb
+	ret	lr
 ENDPROC(v7_invalidate_l1)
 
 /*
-- 
2.30.2

[PATCH AUTOSEL 4.4 1/4] ARM: 9058/1: cache-v7: refactor v7_invalidate_l1 to avoid clobbering r5/r6

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit f9e7a99fb6b86aa6a00e53b34ee6973840e005aa ]

The cache invalidation code in v7_invalidate_l1 can be tweaked to
re-read the associativity from CCSIDR, and keep the way identifier
component in a single register that is assigned in the outer loop. This
way, we need 2 registers less.

Given that the number of sets is typically much larger than the
associativity, rearrange the code so that the outer loop has the fewer
number of iterations, ensuring that the re-read of CCSIDR only occurs a
handful of times in practice.

Fix the whitespace while at it, and update the comment to indicate that
this code is no longer a clone of anything else.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/cache-v7.S | 51 +++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 11d699af30ed..db568be45946 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -27,41 +27,40 @@
  * processor.  We fix this by performing an invalidate, rather than a
  * clean + invalidate, before jumping into the kernel.
  *
- * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures.
+ * This function needs to be called for both secondary cores startup and
+ * primary core resume procedures.
  */
 ENTRY(v7_invalidate_l1)
        mov     r0, #0
        mcr     p15, 2, r0, c0, c0, 0
        mrc     p15, 1, r0, c0, c0, 0
 
-       movw    r1, #0x7fff
-       and     r2, r1, r0, lsr #13
+	movw	r3, #0x3ff
+	and	r3, r3, r0, lsr #3	@ 'Associativity' in CCSIDR[12:3]
+	clz	r1, r3			@ WayShift
+	mov	r2, #1
+	mov	r3, r3, lsl r1		@ NumWays-1 shifted into bits [31:...]
+	movs	r1, r2, lsl r1		@ #1 shifted left by same amount
+	moveq	r1, #1			@ r1 needs value > 0 even if only 1 way
 
-       movw    r1, #0x3ff
+	and	r2, r0, #0x7
+	add	r2, r2, #4		@ SetShift
 
-       and     r3, r1, r0, lsr #3      @ NumWays - 1
-       add     r2, r2, #1              @ NumSets
+1:	movw	r4, #0x7fff
+	and	r0, r4, r0, lsr #13	@ 'NumSets' in CCSIDR[27:13]
 
-       and     r0, r0, #0x7
-       add     r0, r0, #4      @ SetShift
-
-       clz     r1, r3          @ WayShift
-       add     r4, r3, #1      @ NumWays
-1:     sub     r2, r2, #1      @ NumSets--
-       mov     r3, r4          @ Temp = NumWays
-2:     subs    r3, r3, #1      @ Temp--
-       mov     r5, r3, lsl r1
-       mov     r6, r2, lsl r0
-       orr     r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-       mcr     p15, 0, r5, c7, c6, 2
-       bgt     2b
-       cmp     r2, #0
-       bgt     1b
-       dsb     st
-       isb
-       ret     lr
+2:	mov	r4, r0, lsl r2		@ NumSet << SetShift
+	orr	r4, r4, r3		@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r4, c7, c6, 2
+	subs	r0, r0, #1		@ Set--
+	bpl	2b
+	subs	r3, r3, r1		@ Way--
+	bcc	3f
+	mrc	p15, 1, r0, c0, c0, 0	@ re-read cache geometry from CCSIDR
+	b	1b
+3:	dsb	st
+	isb
+	ret	lr
 ENDPROC(v7_invalidate_l1)
 
 /*
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.4 2/4] ACPI / hotplug / PCI: Fix reference count leak in enable_slot()

[Sasha Levin]

From: Feilong Lin <linfeilong@huawei.com>

[ Upstream commit 3bbfd319034ddce59e023837a4aa11439460509b ]

In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED
flag. When pci_get_slot() finds a device, it increments the device's
reference count.  In this case, we did not call pci_dev_put() to decrement
the reference count, so the memory of the device (struct pci_dev type) will
eventually leak.

Call pci_dev_put() to decrement its reference count when pci_get_slot()
returns a PCI device.

Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/acpiphp_glue.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6727471ea5b4..d0f5c526c8e6 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -538,6 +538,7 @@ static void enable_slot(struct acpiphp_slot *slot)
 			slot->flags &= (~SLOT_ENABLED);
 			continue;
 		}
+		pci_dev_put(dev);
 	}
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 3/4] um: Mark all kernel symbols as local

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d5027ca63e0e778b641cf23e3f5c6d6212cf412b ]

Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):

(gdb) bt
...
 #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
 #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
 #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
 #45 0x00007f8990968b85 in __getgrnam_r [...]
 #46 0x00007f89909d6b77 in grantpt [...]
 #47 0x00007f8990a9394e in __GI_openpty [...]
 #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144

indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.

This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().

Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().

Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.

Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.

Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.

Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.

[1] https://bugs.debian.org/983379

Reported-by: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-By: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/kernel/dyn.lds.S | 6 ++++++
 arch/um/kernel/uml.lds.S | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index adde088aeeff..d837636ec823 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH)
 ENTRY(_start)
 jiffies = jiffies_64;
 
+VERSION {
+  {
+    local: *;
+  };
+}
+
 SECTIONS
 {
   PROVIDE (__executable_start = START);
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 6899195602b7..09620aa953ca 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH)
 ENTRY(_start)
 jiffies = jiffies_64;
 
+VERSION {
+  {
+    local: *;
+  };
+}
+
 SECTIONS
 {
   /* This must contain the right address - not quite the default ELF one.*/
-- 
2.30.2

[PATCH AUTOSEL 4.4 3/4] um: Mark all kernel symbols as local

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d5027ca63e0e778b641cf23e3f5c6d6212cf412b ]

Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):

(gdb) bt
...
 #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
 #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
 #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
 #45 0x00007f8990968b85 in __getgrnam_r [...]
 #46 0x00007f89909d6b77 in grantpt [...]
 #47 0x00007f8990a9394e in __GI_openpty [...]
 #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144

indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.

This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().

Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().

Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.

Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.

Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.

Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.

[1] https://bugs.debian.org/983379

Reported-by: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-By: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/kernel/dyn.lds.S | 6 ++++++
 arch/um/kernel/uml.lds.S | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index adde088aeeff..d837636ec823 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH)
 ENTRY(_start)
 jiffies = jiffies_64;
 
+VERSION {
+  {
+    local: *;
+  };
+}
+
 SECTIONS
 {
   PROVIDE (__executable_start = START);
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 6899195602b7..09620aa953ca 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH)
 ENTRY(_start)
 jiffies = jiffies_64;
 
+VERSION {
+  {
+    local: *;
+  };
+}
+
 SECTIONS
 {
   /* This must contain the right address - not quite the default ELF one.*/
-- 
2.30.2


_______________________________________________
linux-um mailing list
linux-um@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-um

[PATCH AUTOSEL 4.4 4/4] ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP

[Sasha Levin]

From: Hui Wang <hui.wang@canonical.com>

[ Upstream commit f48652bbe3ae62ba2835a396b7e01f063e51c4cd ]

Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".

On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)

BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_generic.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index dcefb12557f1..7fed8d1bb79c 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -1182,11 +1182,17 @@ static const char *get_line_out_pfx(struct hda_codec *codec, int ch,
 		*index = ch;
 		return "Headphone";
 	case AUTO_PIN_LINE_OUT:
-		/* This deals with the case where we have two DACs and
-		 * one LO, one HP and one Speaker */
-		if (!ch && cfg->speaker_outs && cfg->hp_outs) {
-			bool hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type);
-			bool spk_lo_shared = !path_has_mixer(codec, spec->speaker_paths[0], ctl_type);
+		/* This deals with the case where one HP or one Speaker or
+		 * one HP + one Speaker need to share the DAC with LO
+		 */
+		if (!ch) {
+			bool hp_lo_shared = false, spk_lo_shared = false;
+
+			if (cfg->speaker_outs)
+				spk_lo_shared = !path_has_mixer(codec,
+								spec->speaker_paths[0],	ctl_type);
+			if (cfg->hp_outs)
+				hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type);
 			if (hp_lo_shared && spk_lo_shared)
 				return spec->vmaster_mute.hook ? "PCM" : "Master";
 			if (hp_lo_shared)
-- 
2.30.2

[PATCH AUTOSEL 4.4 4/4] ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP

[Sasha Levin]

From: Hui Wang <hui.wang@canonical.com>

[ Upstream commit f48652bbe3ae62ba2835a396b7e01f063e51c4cd ]

Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".

On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)

BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_generic.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index dcefb12557f1..7fed8d1bb79c 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -1182,11 +1182,17 @@ static const char *get_line_out_pfx(struct hda_codec *codec, int ch,
 		*index = ch;
 		return "Headphone";
 	case AUTO_PIN_LINE_OUT:
-		/* This deals with the case where we have two DACs and
-		 * one LO, one HP and one Speaker */
-		if (!ch && cfg->speaker_outs && cfg->hp_outs) {
-			bool hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type);
-			bool spk_lo_shared = !path_has_mixer(codec, spec->speaker_paths[0], ctl_type);
+		/* This deals with the case where one HP or one Speaker or
+		 * one HP + one Speaker need to share the DAC with LO
+		 */
+		if (!ch) {
+			bool hp_lo_shared = false, spk_lo_shared = false;
+
+			if (cfg->speaker_outs)
+				spk_lo_shared = !path_has_mixer(codec,
+								spec->speaker_paths[0],	ctl_type);
+			if (cfg->hp_outs)
+				hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type);
 			if (hp_lo_shared && spk_lo_shared)
 				return spec->vmaster_mute.hook ? "PCM" : "Master";
 			if (hp_lo_shared)
-- 
2.30.2