[PATCH v3 7/8] ufs: Fix the tracing code

From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
	Jaegeuk Kim <jaegeuk@kernel.org>,
	linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	Can Guo <cang@codeaurora.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	Stanley Chu <stanley.chu@mediatek.com>,
	Bean Huo <beanhuo@micron.com>,
	Adrian Hunter <adrian.hunter@intel.com>
Subject: [PATCH v3 7/8] ufs: Fix the tracing code
Date: Thu, 13 May 2021 15:37:56 -0700	[thread overview]
Message-ID: <20210513223757.3938-8-bvanassche@acm.org> (raw)
In-Reply-To: <20210513223757.3938-1-bvanassche@acm.org>

Use scsi_get_sector() instead of scsi_get_lba() since the name of the
latter is confusing. Use scsi_get_sector() for all SCSI requests since all
SCSI requests have a block layer request attached and hence calling
scsi_get_sector() is allowed. Convert the scsi_get_sector() result
from sector_t into an LBA with sectors_to_logical(). Since READ(10),
WRITE(10), READ(16) and WRITE(16) all have a GROUP NUMBER field, extract
the GROUP NUMBER field for all four SCSI commands. Apply the 0x3f mask to
that field since the upper two bits are reserved. Rename the 'transfer_len'
variable into 'affected_bytes' since it represents the number of bytes
affected on the storage medium instead of the size of the SCSI data buffer.

Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ufs/ufshcd.c  | 34 +++++++++++++++-------------------
 include/trace/events/ufs.h | 10 +++++-----
 2 files changed, 20 insertions(+), 24 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ab707a2c3796..75310ac95b3d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -17,6 +17,8 @@
 #include <linux/blk-pm.h>
 #include <linux/blkdev.h>
 #include <scsi/scsi_driver.h>
+#include <scsi/scsi_cmnd.h>
+#include "../sd.h"
 #include "ufshcd.h"
 #include "ufs_quirks.h"
 #include "unipro.h"
@@ -369,7 +371,7 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba, unsigned int tag,
 	u32 intr, doorbell;
 	struct ufshcd_lrb *lrbp = &hba->lrb[tag];
 	struct scsi_cmnd *cmd = lrbp->cmd;
-	int transfer_len = -1;
+	int affected_bytes = -1;
 
 	if (!trace_ufshcd_command_enabled()) {
 		/* trace UPIU W/O tracing command */
@@ -381,30 +383,24 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba, unsigned int tag,
 	if (cmd) { /* data phase exists */
 		/* trace UPIU also */
 		ufshcd_add_cmd_upiu_trace(hba, tag, str_t);
-		opcode = cmd->cmnd[0];
-		if ((opcode == READ_10) || (opcode == WRITE_10)) {
-			/*
-			 * Currently we only fully trace read(10) and write(10)
-			 * commands
-			 */
-			if (cmd->request && cmd->request->bio)
-				lba = cmd->request->bio->bi_iter.bi_sector;
-			transfer_len = be32_to_cpu(
-				lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
-			if (opcode == WRITE_10)
-				group_id = lrbp->cmd->cmnd[6];
-		} else if (opcode == UNMAP) {
-			if (cmd->request) {
-				lba = scsi_get_lba(cmd);
-				transfer_len = blk_rq_bytes(cmd->request);
-			}
+		lba = sectors_to_logical(cmd->device, scsi_get_sector(cmd));
+		affected_bytes = blk_rq_bytes(cmd->request);
+		switch (cmd->cmnd[0]) {
+		case READ_10:
+		case WRITE_10:
+			group_id = lrbp->cmd->cmnd[6] & 0x3f;
+			break;
+		case READ_16:
+		case WRITE_16:
+			group_id = lrbp->cmd->cmnd[14] & 0x3f;
+			break;
 		}
 	}
 
 	intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
 	doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	trace_ufshcd_command(dev_name(hba->dev), str_t, tag,
-			doorbell, transfer_len, intr, lba, opcode, group_id);
+			doorbell, affected_bytes, intr, lba, opcode, group_id);
 }
 
 static void ufshcd_print_clk_freqs(struct ufs_hba *hba)
diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
index 599739ee7b20..71055021de91 100644
--- a/include/trace/events/ufs.h
+++ b/include/trace/events/ufs.h
@@ -268,10 +268,10 @@ DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume,
 
 TRACE_EVENT(ufshcd_command,
 	TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t,
-		 unsigned int tag, u32 doorbell, int transfer_len, u32 intr,
+		 unsigned int tag, u32 doorbell, int affected_bytes, u32 intr,
 		 u64 lba, u8 opcode, u8 group_id),
 
-	TP_ARGS(dev_name, str_t, tag, doorbell, transfer_len,
+	TP_ARGS(dev_name, str_t, tag, doorbell, affected_bytes,
 				intr, lba, opcode, group_id),
 
 	TP_STRUCT__entry(
@@ -279,7 +279,7 @@ TRACE_EVENT(ufshcd_command,
 		__field(enum ufs_trace_str_t, str_t)
 		__field(unsigned int, tag)
 		__field(u32, doorbell)
-		__field(int, transfer_len)
+		__field(int, affected_bytes)
 		__field(u32, intr)
 		__field(u64, lba)
 		__field(u8, opcode)
@@ -291,7 +291,7 @@ TRACE_EVENT(ufshcd_command,
 		__entry->str_t = str_t;
 		__entry->tag = tag;
 		__entry->doorbell = doorbell;
-		__entry->transfer_len = transfer_len;
+		__entry->affected_bytes = affected_bytes;
 		__entry->intr = intr;
 		__entry->lba = lba;
 		__entry->opcode = opcode;
@@ -301,7 +301,7 @@ TRACE_EVENT(ufshcd_command,
 	TP_printk(
 		"%s: %s: tag: %u, DB: 0x%x, size: %d, IS: %u, LBA: %llu, opcode: 0x%x (%s), group_id: 0x%x",
 		show_ufs_cmd_trace_str(__entry->str_t), __get_str(dev_name),
-		__entry->tag, __entry->doorbell, __entry->transfer_len,
+		__entry->tag, __entry->doorbell, __entry->affected_bytes,
 		__entry->intr, __entry->lba, (u32)__entry->opcode,
 		str_opcode(__entry->opcode), (u32)__entry->group_id
 	)
