[PATCH 00/50] Remove the request pointer from struct scsi_cmnd

[PATCH 00/50] Remove the request pointer from struct scsi_cmnd

[Bart Van Assche]

Hi Martin,

This patch series implements the following two changes for all SCSI drivers:
- Use blk_mq_rq_from_pdu() instead of the request member of struct scsi_cmnd
  since adding an offset to a pointer is faster than pointer indirection.
- Remove the request pointer from struct scsi_cmnd.

Please consider this patch series for kernel v5.14.

Thanks,

Bart.

Bart Van Assche (50):
  core: Introduce the blk_req() function
  core: Use blk_req() instead of scsi_cmnd.request
  sd: Use blk_req() instead of scsi_cmnd.request
  sr: Use blk_req() instead of scsi_cmnd.request
  scsi_transport_fc: Use blk_req() instead of scsi_cmnd.request
  scsi_transport_spi: Use blk_req() instead of scsi_cmnd.request
  ata: Use blk_req() instead of scsi_cmnd.request
  rdma/iser: Use blk_req() instead of scsi_cmnd.request
  rdma/srp: Use blk_req() instead of scsi_cmnd.request
  zfcp: Use blk_req() instead of scsi_cmnd.request
  53c700: Use blk_req() instead of scsi_cmnd.request
  NCR5380: Use blk_req() instead of scsi_cmnd.request
  aacraid: Use blk_req() instead of scsi_cmnd.request
  advansys: Use blk_req() instead of scsi_cmnd.request
  bnx2i: Use blk_req() instead of scsi_cmnd.request
  csiostor: Use blk_req() instead of scsi_cmnd.request
  cxlflash: Use blk_req() instead of scsi_cmnd.request
  dpt_i2o: Use blk_req() instead of scsi_cmnd.request
  fnic: Use blk_req() instead of scsi_cmnd.request
  hisi_sas: Use blk_req() instead of scsi_cmnd.request
  hpsa: Use blk_req() instead of scsi_cmnd.request
  ibmvfc: Use blk_req() instead of scsi_cmnd.request
  ibmvscsi: Use blk_req() instead of scsi_cmnd.request
  ips: Use blk_req() instead of scsi_cmnd.request
  libsas: Use blk_req() instead of scsi_cmnd.request
  lpfc: Use blk_req() instead of scsi_cmnd.request
  megaraid: Use blk_req() instead of scsi_cmnd.request
  mpt3sas: Use blk_req() instead of scsi_cmnd.request
  mvumi: Use blk_req() instead of scsi_cmnd.request
  myrb: Use blk_req() instead of scsi_cmnd.request
  myrs: Use blk_req() instead of scsi_cmnd.request
  ncr53c8xx: Use blk_req() instead of scsi_cmnd.request
  qedf: Use blk_req() instead of scsi_cmnd.request
  qedi: Use blk_req() instead of scsi_cmnd.request
  qla1280: Use blk_req() instead of scsi_cmnd.request
  qla2xxx: Use blk_req() instead of scsi_cmnd.request
  qla4xxx: Use blk_req() instead of scsi_cmnd.request
  qlogicpti: Use blk_req() instead of scsi_cmnd.request
  scsi_debug: Use blk_req() instead of scsi_cmnd.request
  smartpqi: Use blk_req() instead of scsi_cmnd.request
  snic: Use blk_req() instead of scsi_cmnd.request
  stex: Use blk_req() instead of scsi_cmnd.request
  sun3_scsi: Use blk_req() instead of scsi_cmnd.request
  sym53c8xx: Use blk_req() instead of scsi_cmnd.request
  ufs: Use blk_req() instead of scsi_cmnd.request
  virtio_scsi: Use blk_req() instead of scsi_cmnd.request
  xen-scsifront: Use blk_req() instead of scsi_cmnd.request
  tcm_loop: Use blk_req() instead of scsi_cmnd.request
  usb-storage: Use blk_req() instead of scsi_cmnd.request
  core: Remove the request member from struct scsi_cmnd

 drivers/ata/libata-eh.c                     |  5 +-
 drivers/ata/libata-scsi.c                   | 10 ++--
 drivers/infiniband/ulp/iser/iser_memory.c   |  2 +-
 drivers/infiniband/ulp/srp/ib_srp.c         |  6 +-
 drivers/s390/scsi/zfcp_fsf.c                |  2 +-
 drivers/scsi/53c700.c                       |  2 +-
 drivers/scsi/NCR5380.c                      |  6 +-
 drivers/scsi/aacraid/aachba.c               |  2 +-
 drivers/scsi/aacraid/commsup.c              |  2 +-
 drivers/scsi/advansys.c                     |  4 +-
 drivers/scsi/bnx2i/bnx2i_hwi.c              |  2 +-
 drivers/scsi/csiostor/csio_scsi.c           |  6 +-
 drivers/scsi/cxlflash/main.c                |  2 +-
 drivers/scsi/dpt_i2o.c                      |  4 +-
 drivers/scsi/fnic/fnic_scsi.c               | 40 ++++++-------
 drivers/scsi/hisi_sas/hisi_sas_main.c       |  4 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c      |  2 +-
 drivers/scsi/hpsa.c                         |  6 +-
 drivers/scsi/ibmvscsi/ibmvfc.c              |  2 +-
 drivers/scsi/ibmvscsi/ibmvscsi.c            |  2 +-
 drivers/scsi/ips.c                          |  2 +-
 drivers/scsi/libsas/sas_ata.c               |  2 +-
 drivers/scsi/libsas/sas_scsi_host.c         |  2 +-
 drivers/scsi/lpfc/lpfc_scsi.c               | 63 ++++++++++-----------
 drivers/scsi/megaraid/megaraid_sas_base.c   |  4 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 10 ++--
 drivers/scsi/mpt3sas/mpt3sas_base.c         |  4 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c        |  6 +-
 drivers/scsi/mvumi.c                        |  2 +-
 drivers/scsi/myrb.c                         | 10 ++--
 drivers/scsi/myrs.c                         | 10 ++--
 drivers/scsi/ncr53c8xx.c                    |  4 +-
 drivers/scsi/qedf/qedf_io.c                 |  8 +--
 drivers/scsi/qedi/qedi_fw.c                 |  9 +--
 drivers/scsi/qla1280.c                      |  6 +-
 drivers/scsi/qla2xxx/qla_os.c               |  4 +-
 drivers/scsi/qla4xxx/ql4_iocb.c             |  2 +-
 drivers/scsi/qla4xxx/ql4_os.c               |  4 +-
 drivers/scsi/qlogicpti.c                    |  2 +-
 drivers/scsi/scsi.c                         |  2 +-
 drivers/scsi/scsi_debug.c                   | 13 +++--
 drivers/scsi/scsi_error.c                   | 15 +++--
 drivers/scsi/scsi_lib.c                     | 27 +++++----
 drivers/scsi/scsi_logging.c                 | 18 +++---
 drivers/scsi/scsi_transport_fc.c            |  2 +-
 drivers/scsi/scsi_transport_spi.c           |  2 +-
 drivers/scsi/sd.c                           | 32 +++++------
 drivers/scsi/sd_zbc.c                       | 10 ++--
 drivers/scsi/smartpqi/smartpqi_init.c       |  4 +-
 drivers/scsi/snic/snic_scsi.c               | 10 ++--
 drivers/scsi/sr.c                           | 10 ++--
 drivers/scsi/stex.c                         |  6 +-
 drivers/scsi/sun3_scsi.c                    |  2 +-
 drivers/scsi/sym53c8xx_2/sym_glue.c         |  4 +-
 drivers/scsi/ufs/ufshcd.c                   | 22 +++----
 drivers/scsi/virtio_scsi.c                  |  4 +-
 drivers/scsi/xen-scsifront.c                |  2 +-
 drivers/target/loopback/tcm_loop.c          |  4 +-
 drivers/usb/storage/transport.c             |  2 +-
 include/scsi/scsi_cmnd.h                    | 13 +++--
 include/scsi/scsi_device.h                  | 16 +++---
 61 files changed, 239 insertions(+), 246 deletions(-)

[PATCH 01/50] core: Introduce the blk_req() function

[Bart Van Assche]

The 'request' member of struct scsi_cmnd is superfluous. The struct
request and struct scsi_cmnd data structures are adjacent and hence the
request pointer can be derived easily from a scsi_cmnd pointer. Introduce
a helper function that performs that conversion in a type-safe way. This
patch is the first step towards removing the request member from struct
scsi_cmnd. Making that change has the following advantages:
- This is a performance optimization since adding an offset to a pointer
  takes less time than dereferencing a pointer.
- struct scsi_cmnd becomes smaller.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 include/scsi/scsi_cmnd.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index fed024f4c02a..f5825be7ee76 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -146,6 +146,12 @@ struct scsi_cmnd {
 	unsigned int extra_len;	/* length of alignment and padding */
 };
 
+/* Variant of blk_mq_rq_from_pdu() that verifies the type of its argument. */
+static inline struct request *blk_req(struct scsi_cmnd *scmd)
+{
+	return blk_mq_rq_from_pdu(scmd);
+}
+
 /*
  * Return the driver private allocation behind the command.
  * Only works if cmd_size is set in the host template.

[PATCH 02/50] core: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi.c         |  2 +-
 drivers/scsi/scsi_error.c   | 14 +++++++-------
 drivers/scsi/scsi_lib.c     | 26 +++++++++++++-------------
 drivers/scsi/scsi_logging.c | 18 ++++++++++--------
 include/scsi/scsi_cmnd.h    |  4 ++--
 include/scsi/scsi_device.h  | 16 +++++++++-------
 6 files changed, 42 insertions(+), 38 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index e9e2f0e15ac8..a226f2d380a3 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -197,7 +197,7 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
 				"(result %x)\n", cmd->result));
 
 	good_bytes = scsi_bufflen(cmd);
-	if (!blk_rq_is_passthrough(cmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(cmd))) {
 		int old_good_bytes = good_bytes;
 		drv = scsi_cmd_to_driver(cmd);
 		if (drv->done)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index d8fafe77dbbe..8846e5066f92 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -242,7 +242,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
  */
 static void scsi_eh_reset(struct scsi_cmnd *scmd)
 {
-	if (!blk_rq_is_passthrough(scmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(scmd))) {
 		struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
 		if (sdrv->eh_reset)
 			sdrv->eh_reset(scmd);
@@ -1188,7 +1188,7 @@ static enum scsi_disposition scsi_request_sense(struct scsi_cmnd *scmd)
 static enum scsi_disposition
 scsi_eh_action(struct scsi_cmnd *scmd, enum scsi_disposition rtn)
 {
-	if (!blk_rq_is_passthrough(scmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(scmd))) {
 		struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
 		if (sdrv->eh_action)
 			rtn = sdrv->eh_action(scmd, rtn);
@@ -1762,16 +1762,16 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 	case DID_TIME_OUT:
 		goto check_type;
 	case DID_BUS_BUSY:
-		return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
+		return blk_req(scmd)->cmd_flags & REQ_FAILFAST_TRANSPORT;
 	case DID_PARITY:
-		return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
+		return blk_req(scmd)->cmd_flags & REQ_FAILFAST_DEV;
 	case DID_ERROR:
 		if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
 		    status_byte(scmd->result) == RESERVATION_CONFLICT)
 			return 0;
 		fallthrough;
 	case DID_SOFT_ERROR:
-		return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
+		return blk_req(scmd)->cmd_flags & REQ_FAILFAST_DRIVER;
 	}
 
 	if (status_byte(scmd->result) != CHECK_CONDITION)
@@ -1782,8 +1782,8 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 	 * assume caller has checked sense and determined
 	 * the check condition was retryable.
 	 */
-	if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
-	    blk_rq_is_passthrough(scmd->request))
+	if (blk_req(scmd)->cmd_flags & REQ_FAILFAST_DEV ||
+	    blk_rq_is_passthrough(blk_req(scmd)))
 		return 1;
 
 	return 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 532304d42f00..e88ce8f747ee 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -119,13 +119,13 @@ scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
 
 static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
 {
-	if (cmd->request->rq_flags & RQF_DONTPREP) {
-		cmd->request->rq_flags &= ~RQF_DONTPREP;
+	if (blk_req(cmd)->rq_flags & RQF_DONTPREP) {
+		blk_req(cmd)->rq_flags &= ~RQF_DONTPREP;
 		scsi_mq_uninit_cmd(cmd);
 	} else {
 		WARN_ON_ONCE(true);
 	}
-	blk_mq_requeue_request(cmd->request, true);
+	blk_mq_requeue_request(blk_req(cmd), true);
 }
 
 /**
@@ -164,7 +164,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
 	 */
 	cmd->result = 0;
 
-	blk_mq_requeue_request(cmd->request, true);
+	blk_mq_requeue_request(blk_req(cmd), true);
 }
 
 /**
@@ -475,7 +475,7 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
 
 static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
 {
-	if (!blk_rq_is_passthrough(cmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(cmd))) {
 		struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
 
 		if (drv->uninit_command)
@@ -626,7 +626,7 @@ static void scsi_io_completion_reprep(struct scsi_cmnd *cmd,
 
 static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd)
 {
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	unsigned long wait_for;
 
 	if (cmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
@@ -645,7 +645,7 @@ static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd)
 static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
 {
 	struct request_queue *q = cmd->device->request_queue;
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	int level = 0;
 	enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
 	      ACTION_DELAYED_RETRY} action;
@@ -819,7 +819,7 @@ static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
 {
 	bool sense_valid;
 	bool sense_current = true;	/* false implies "deferred sense" */
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	struct scsi_sense_hdr sshdr;
 
 	sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
@@ -908,7 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
 	int result = cmd->result;
 	struct request_queue *q = cmd->device->request_queue;
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	blk_status_t blk_stat = BLK_STS_OK;
 
 	if (unlikely(result))	/* a nz result may or may not be an error */
@@ -979,7 +979,7 @@ static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
 blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd)
 {
 	struct scsi_device *sdev = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	unsigned short nr_segs = blk_rq_nr_phys_segments(rq);
 	struct scatterlist *last_sg = NULL;
 	blk_status_t ret;
@@ -1108,7 +1108,7 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 {
 	void *buf = cmd->sense_buffer;
 	void *prot = cmd->prot_sdb;
-	struct request *rq = blk_mq_rq_from_pdu(cmd);
+	struct request *rq = blk_req(cmd);
 	unsigned int flags = cmd->flags & SCMD_PRESERVED_FLAGS;
 	unsigned long jiffies_at_alloc;
 	int retries, to_clear;
@@ -1573,12 +1573,12 @@ static blk_status_t scsi_prepare_cmd(struct request *req)
 
 static void scsi_mq_done(struct scsi_cmnd *cmd)
 {
-	if (unlikely(blk_should_fake_timeout(cmd->request->q)))
+	if (unlikely(blk_should_fake_timeout(blk_req(cmd)->q)))
 		return;
 	if (unlikely(test_and_set_bit(SCMD_STATE_COMPLETE, &cmd->state)))
 		return;
 	trace_scsi_dispatch_cmd_done(cmd);
-	blk_mq_complete_request(cmd->request);
+	blk_mq_complete_request(blk_req(cmd));
 }
 
 static void scsi_mq_put_budget(struct request_queue *q, int budget_token)
diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index 8ea44c6595ef..706986e7f5ef 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -28,8 +28,9 @@ static void scsi_log_release_buffer(char *bufptr)
 
 static inline const char *scmd_name(const struct scsi_cmnd *scmd)
 {
-	return scmd->request->rq_disk ?
-		scmd->request->rq_disk->disk_name : NULL;
+	struct request *rq = blk_req((struct scsi_cmnd *)scmd);
+
+	return rq->rq_disk ? rq->rq_disk->disk_name : NULL;
 }
 
 static size_t sdev_format_header(char *logbuf, size_t logbuf_len,
@@ -91,7 +92,7 @@ void scmd_printk(const char *level, const struct scsi_cmnd *scmd,
 	if (!logbuf)
 		return;
 	off = sdev_format_header(logbuf, logbuf_len, scmd_name(scmd),
-				 scmd->request->tag);
+				 blk_req((struct scsi_cmnd *)scmd)->tag);
 	if (off < logbuf_len) {
 		va_start(args, fmt);
 		off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args);
@@ -188,7 +189,7 @@ void scsi_print_command(struct scsi_cmnd *cmd)
 		return;
 
 	off = sdev_format_header(logbuf, logbuf_len,
-				 scmd_name(cmd), cmd->request->tag);
+				 scmd_name(cmd), blk_req(cmd)->tag);
 	if (off >= logbuf_len)
 		goto out_printk;
 	off += scnprintf(logbuf + off, logbuf_len - off, "CDB: ");
@@ -210,7 +211,7 @@ void scsi_print_command(struct scsi_cmnd *cmd)
 
 			off = sdev_format_header(logbuf, logbuf_len,
 						 scmd_name(cmd),
-						 cmd->request->tag);
+						 blk_req(cmd)->tag);
 			if (!WARN_ON(off > logbuf_len - 58)) {
 				off += scnprintf(logbuf + off, logbuf_len - off,
 						 "CDB[%02x]: ", k);
@@ -373,7 +374,8 @@ EXPORT_SYMBOL(__scsi_print_sense);
 /* Normalize and print sense buffer in SCSI command */
 void scsi_print_sense(const struct scsi_cmnd *cmd)
 {
-	scsi_log_print_sense(cmd->device, scmd_name(cmd), cmd->request->tag,
+	scsi_log_print_sense(cmd->device, scmd_name(cmd),
+			     blk_req((struct scsi_cmnd *)cmd)->tag,
 			     cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
 }
 EXPORT_SYMBOL(scsi_print_sense);
@@ -392,8 +394,8 @@ void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg,
 	if (!logbuf)
 		return;
 
-	off = sdev_format_header(logbuf, logbuf_len,
-				 scmd_name(cmd), cmd->request->tag);
+	off = sdev_format_header(logbuf, logbuf_len, scmd_name(cmd),
+				 blk_req((struct scsi_cmnd *)cmd)->tag);
 
 	if (off >= logbuf_len)
 		goto out_printk;
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index f5825be7ee76..a68521e6ce57 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -164,7 +164,7 @@ static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd)
 /* make sure not to use it with passthrough commands */
 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
 {
-	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+	return *(struct scsi_driver **)blk_req(cmd)->rq_disk->private_data;
 }
 
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
@@ -290,7 +290,7 @@ static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
 
 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
 {
-	return blk_rq_pos(scmd->request);
+	return blk_rq_pos(blk_req(scmd));
 }
 
 static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd)
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index ac6ab16abee7..2614e4a6a01e 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -265,13 +265,15 @@ sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
 __printf(3, 4) void
 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
 
-#define scmd_dbg(scmd, fmt, a...)					   \
-	do {								   \
-		if ((scmd)->request->rq_disk)				   \
-			sdev_dbg((scmd)->device, "[%s] " fmt,		   \
-				 (scmd)->request->rq_disk->disk_name, ##a);\
-		else							   \
-			sdev_dbg((scmd)->device, fmt, ##a);		   \
+#define scmd_dbg(scmd, fmt, a...)				\
+	do {							\
+		struct request *rq = blk_req((scmd));		\
+								\
+		if (rq->rq_disk)				\
+			sdev_dbg((scmd)->device, "[%s] " fmt,	\
+				 rq->rq_disk->disk_name, ##a);	\
+		else						\
+			sdev_dbg((scmd)->device, fmt, ##a);	\
 	} while (0)
 
 enum scsi_target_state {

[PATCH 03/50] sd: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sd.c     | 32 ++++++++++++++++----------------
 drivers/scsi/sd_zbc.c | 10 +++++-----
 2 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index cb3c37d1e009..0886b4dbef32 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -779,8 +779,8 @@ static unsigned int sd_prot_flag_mask(unsigned int prot_op)
 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
 					   unsigned int dix, unsigned int dif)
 {
-	struct bio *bio = scmd->request->bio;
-	unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
+	struct bio *bio = blk_req(scmd)->bio;
+	unsigned int prot_op = sd_prot_op(rq_data_dir(blk_req(scmd)), dix, dif);
 	unsigned int protect = 0;
 
 	if (dix) {				/* DIX Type 0, 1, 2, 3 */
@@ -871,7 +871,7 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
 {
 	struct scsi_device *sdp = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
@@ -907,7 +907,7 @@ static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
 		bool unmap)
 {
 	struct scsi_device *sdp = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
@@ -939,7 +939,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
 		bool unmap)
 {
 	struct scsi_device *sdp = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
@@ -969,7 +969,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
 
 static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_device *sdp = cmd->device;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
@@ -1066,7 +1066,7 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
  **/
 static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_device *sdp = cmd->device;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	struct bio *bio = rq->bio;
@@ -1115,7 +1115,7 @@ static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 
 static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 
 	/* flush requests don't perform I/O, zero the S/G table */
@@ -1213,7 +1213,7 @@ static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write,
 
 static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_device *sdp = cmd->device;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq));
@@ -1327,7 +1327,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 
 static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 
 	switch (req_op(rq)) {
 	case REQ_OP_DISCARD:
@@ -1373,7 +1373,7 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 
 static void sd_uninit_command(struct scsi_cmnd *SCpnt)
 {
-	struct request *rq = SCpnt->request;
+	struct request *rq = blk_req(SCpnt);
 	u8 *cmnd;
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
@@ -1906,7 +1906,7 @@ static const struct block_device_operations sd_fops = {
  **/
 static void sd_eh_reset(struct scsi_cmnd *scmd)
 {
-	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
+	struct scsi_disk *sdkp = scsi_disk(blk_req(scmd)->rq_disk);
 
 	/* New SCSI EH run, reset gate variable */
 	sdkp->ignore_medium_access_errors = false;
@@ -1926,7 +1926,7 @@ static void sd_eh_reset(struct scsi_cmnd *scmd)
  **/
 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
 {
-	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
+	struct scsi_disk *sdkp = scsi_disk(blk_req(scmd)->rq_disk);
 	struct scsi_device *sdev = scmd->device;
 
 	if (!scsi_device_online(sdev) ||
@@ -1967,7 +1967,7 @@ static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
 
 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 {
-	struct request *req = scmd->request;
+	struct request *req = blk_req(scmd);
 	struct scsi_device *sdev = scmd->device;
 	unsigned int transferred, good_bytes;
 	u64 start_lba, end_lba, bad_lba;
@@ -2022,8 +2022,8 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	unsigned int sector_size = SCpnt->device->sector_size;
 	unsigned int resid;
 	struct scsi_sense_hdr sshdr;
-	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
-	struct request *req = SCpnt->request;
+	struct scsi_disk *sdkp = scsi_disk(blk_req(SCpnt)->rq_disk);
+	struct request *req = blk_req(SCpnt);
 	int sense_valid = 0;
 	int sense_deferred = 0;
 
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index e45d8d94574c..0fc26fbc5a3c 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -244,7 +244,7 @@ int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
 
 static blk_status_t sd_zbc_cmnd_checks(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t sector = blk_rq_pos(rq);
 
@@ -322,7 +322,7 @@ static void sd_zbc_update_wp_offset_workfn(struct work_struct *work)
 blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
 					unsigned int nr_blocks)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	unsigned int wp_offset, zno = blk_rq_zone_no(rq);
 	unsigned long flags;
@@ -387,7 +387,7 @@ blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
 blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
 					 unsigned char op, bool all)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	sector_t sector = blk_rq_pos(rq);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t block = sectors_to_logical(sdkp->device, sector);
@@ -443,7 +443,7 @@ static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
 					  unsigned int good_bytes)
 {
 	int result = cmd->result;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	unsigned int zno = blk_rq_zone_no(rq);
 	enum req_opf op = req_op(rq);
@@ -517,7 +517,7 @@ unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		     struct scsi_sense_hdr *sshdr)
 {
 	int result = cmd->result;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 
 	if (op_is_zone_mgmt(req_op(rq)) &&
 	    result &&

[PATCH 04/50] sr: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sr.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index e4633b84c556..5a23f4ca8698 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -326,7 +326,7 @@ static int sr_done(struct scsi_cmnd *SCpnt)
 	int good_bytes = (result == 0 ? this_count : 0);
 	int block_sectors = 0;
 	long error_sector;
-	struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
+	struct scsi_cd *cd = scsi_cd(blk_req(SCpnt)->rq_disk);
 
 #ifdef DEBUG
 	scmd_printk(KERN_INFO, SCpnt, "done: %x\n", result);
@@ -348,16 +348,16 @@ static int sr_done(struct scsi_cmnd *SCpnt)
 				break;
 			error_sector =
 				get_unaligned_be32(&SCpnt->sense_buffer[3]);
-			if (SCpnt->request->bio != NULL)
+			if (blk_req(SCpnt)->bio != NULL)
 				block_sectors =
-					bio_sectors(SCpnt->request->bio);
+					bio_sectors(blk_req(SCpnt)->bio);
 			if (block_sectors < 4)
 				block_sectors = 4;
 			if (cd->device->sector_size == 2048)
 				error_sector <<= 2;
 			error_sector &= ~(block_sectors - 1);
 			good_bytes = (error_sector -
-				      blk_rq_pos(SCpnt->request)) << 9;
+				      blk_rq_pos(blk_req(SCpnt))) << 9;
 			if (good_bytes < 0 || good_bytes >= this_count)
 				good_bytes = 0;
 			/*
@@ -389,7 +389,7 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
 {
 	int block = 0, this_count, s_size;
 	struct scsi_cd *cd;
-	struct request *rq = SCpnt->request;
+	struct request *rq = blk_req(SCpnt);
 	blk_status_t ret;
 
 	ret = scsi_alloc_sgtables(SCpnt);

[PATCH 05/50] scsi_transport_fc: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_transport_fc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index da5b503dc7a1..8134a5ea5921 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3804,7 +3804,7 @@ bool fc_eh_should_retry_cmd(struct scsi_cmnd *scmd)
 	struct fc_rport *rport = starget_to_rport(scsi_target(scmd->device));
 
 	if ((rport->port_state != FC_PORTSTATE_ONLINE) &&
-		(scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT)) {
+		(blk_req(scmd)->cmd_flags & REQ_FAILFAST_TRANSPORT)) {
 		set_host_byte(scmd, DID_TRANSPORT_MARGINAL);
 		return false;
 	}

[PATCH 06/50] scsi_transport_spi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_transport_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index c37dd15d16d2..e75c7c184a01 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -1230,7 +1230,7 @@ int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd)
 {
         if (cmd->flags & SCMD_TAGGED) {
 		*msg++ = SIMPLE_QUEUE_TAG;
-        	*msg++ = cmd->request->tag;
+        	*msg++ = blk_req(cmd)->tag;
         	return 2;
 	}
 

[PATCH 07/50] ata: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ata/libata-eh.c   |  5 ++---
 drivers/ata/libata-scsi.c | 10 +++++-----
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bb3637762985..4b007c9adfcb 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -912,7 +912,7 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
 	 * Note that ATA_QCFLAG_FAILED is unconditionally set after
 	 * this function completes.
 	 */
-	blk_abort_request(qc->scsicmd->request);
+	blk_abort_request(blk_req(qc->scsicmd));
 }
 
 /**
@@ -1893,8 +1893,7 @@ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
  */
 static inline bool ata_eh_quiet(struct ata_queued_cmd *qc)
 {
-	if (qc->scsicmd &&
-	    qc->scsicmd->request->rq_flags & RQF_QUIET)
+	if (qc->scsicmd && blk_req(qc->scsicmd)->rq_flags & RQF_QUIET)
 		qc->flags |= ATA_QCFLAG_QUIET;
 	return qc->flags & ATA_QCFLAG_QUIET;
 }
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index fd8b6febbf70..108c2f0b3e17 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -627,7 +627,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 {
 	struct ata_queued_cmd *qc;
 
-	qc = ata_qc_new_init(dev, cmd->request->tag);
+	qc = ata_qc_new_init(dev, blk_req(cmd)->tag);
 	if (qc) {
 		qc->scsicmd = cmd;
 		qc->scsidone = cmd->scsi_done;
@@ -635,7 +635,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 		qc->sg = scsi_sglist(cmd);
 		qc->n_elem = scsi_sg_count(cmd);
 
-		if (cmd->request->rq_flags & RQF_QUIET)
+		if (blk_req(cmd)->rq_flags & RQF_QUIET)
 			qc->flags |= ATA_QCFLAG_QUIET;
 	} else {
 		cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
@@ -1497,7 +1497,7 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
 
 static bool ata_check_nblocks(struct scsi_cmnd *scmd, u32 n_blocks)
 {
-	struct request *rq = scmd->request;
+	struct request *rq = blk_req(scmd);
 	u32 req_blocks;
 
 	if (!blk_rq_is_passthrough(rq))
@@ -1532,7 +1532,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *scmd = qc->scsicmd;
 	const u8 *cdb = scmd->cmnd;
-	struct request *rq = scmd->request;
+	struct request *rq = blk_req(scmd);
 	int class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
 	unsigned int tf_flags = 0;
 	u64 block;
@@ -3182,7 +3182,7 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 	 * as it modifies the DATA OUT buffer, which would corrupt user
 	 * memory for SG_IO commands.
 	 */
-	if (unlikely(blk_rq_is_passthrough(scmd->request)))
+	if (unlikely(blk_rq_is_passthrough(blk_req(scmd))))
 		goto invalid_opcode;
 
 	if (unlikely(scmd->cmd_len < 16)) {

[PATCH 08/50] rdma/iser: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/infiniband/ulp/iser/iser_memory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c
index afec40da9b58..37c5cffaeaa1 100644
--- a/drivers/infiniband/ulp/iser/iser_memory.c
+++ b/drivers/infiniband/ulp/iser/iser_memory.c
@@ -159,7 +159,7 @@ iser_set_dif_domain(struct scsi_cmnd *sc, struct ib_sig_domain *domain)
 {
 	domain->sig_type = IB_SIG_TYPE_T10_DIF;
 	domain->sig.dif.pi_interval = scsi_prot_interval(sc);
-	domain->sig.dif.ref_tag = t10_pi_ref_tag(sc->request);
+	domain->sig.dif.ref_tag = t10_pi_ref_tag(blk_req(sc));
 	/*
 	 * At the moment we hard code those, but in the future
 	 * we will take them from sc.

[PATCH 09/50] rdma/srp: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/infiniband/ulp/srp/ib_srp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 31f8aa2c40ed..0575f5f3ae53 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2182,8 +2182,8 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 	if (unlikely(scmnd->result))
 		goto err;
 
-	WARN_ON_ONCE(scmnd->request->tag < 0);
-	tag = blk_mq_unique_tag(scmnd->request);
+	WARN_ON_ONCE(blk_req(scmnd)->tag < 0);
+	tag = blk_mq_unique_tag(blk_req(scmnd));
 	ch = &target->ch[blk_mq_unique_tag_to_hwq(tag)];
 	idx = blk_mq_unique_tag_to_tag(tag);
 	WARN_ONCE(idx >= target->req_ring_size, "%s: tag %#x: idx %d >= %d\n",
@@ -2814,7 +2814,7 @@ static int srp_abort(struct scsi_cmnd *scmnd)
 
 	if (!req)
 		return SUCCESS;
-	tag = blk_mq_unique_tag(scmnd->request);
+	tag = blk_mq_unique_tag(blk_req(scmnd));
 	ch_idx = blk_mq_unique_tag_to_hwq(tag);
 	if (WARN_ON_ONCE(ch_idx >= target->ch_count))
 		return SUCCESS;

[PATCH 10/50] zfcp: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/s390/scsi/zfcp_fsf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 2e4804ef2fb9..ac9223a7677d 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2377,7 +2377,7 @@ static void zfcp_fsf_req_trace(struct zfcp_fsf_req *req, struct scsi_cmnd *scsi)
 		}
 	}
 
-	blk_add_driver_data(scsi->request, &blktrc, sizeof(blktrc));
+	blk_add_driver_data(blk_req(scsi), &blktrc, sizeof(blktrc));
 }
 
 /**

[PATCH 11/50] 53c700: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/53c700.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 77ccb96e5ed4..8dd686484857 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1823,7 +1823,7 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)
 
 	if ((hostdata->tag_negotiated & (1<<scmd_id(SCp))) &&
 	    SCp->device->simple_tags) {
-		slot->tag = SCp->request->tag;
+		slot->tag = blk_req(SCp)->tag;
 		CDEBUG(KERN_DEBUG, SCp, "sending out tag %d, slot %p\n",
 		       slot->tag, slot);
 	} else {

[PATCH 12/50] NCR5380: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/NCR5380.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 2ddbcaa667d1..cfeadbd98669 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -778,7 +778,7 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
 	}
 
 #ifdef CONFIG_SUN3
-	if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
+	if ((sun3scsi_dma_finish(rq_data_dir(blk_req(hostdata->connected))))) {
 		pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
 		       instance->host_no);
 		BUG();
@@ -1710,7 +1710,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				count = sun3scsi_dma_xfer_len(hostdata, cmd);
 
 				if (count > 0) {
-					if (rq_data_dir(cmd->request))
+					if (rq_data_dir(blk_req(cmd)))
 						sun3scsi_dma_send_setup(hostdata,
 						                        cmd->SCp.ptr, count);
 					else
@@ -2158,7 +2158,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		count = sun3scsi_dma_xfer_len(hostdata, tmp);
 
 		if (count > 0) {
-			if (rq_data_dir(tmp->request))
+			if (rq_data_dir(blk_req(tmp)))
 				sun3scsi_dma_send_setup(hostdata,
 				                        tmp->SCp.ptr, count);
 			else

[PATCH 13/50] aacraid: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/aacraid/aachba.c  | 2 +-
 drivers/scsi/aacraid/commsup.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 46b8dffce2dd..73570f8e89e0 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1505,7 +1505,7 @@ static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd
 	srbcmd->id       = cpu_to_le32(scmd_id(cmd));
 	srbcmd->lun      = cpu_to_le32(cmd->device->lun);
 	srbcmd->flags    = cpu_to_le32(flag);
-	timeout = cmd->request->timeout/HZ;
+	timeout = blk_req(cmd)->timeout / HZ;
 	if (timeout == 0)
 		timeout = (dev->sa_firmware ? AAC_SA_TIMEOUT : AAC_ARC_TIMEOUT);
 	srbcmd->timeout  = cpu_to_le32(timeout);  // timeout in seconds
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 54eb4d41bc2c..4745c0622e53 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -224,7 +224,7 @@ struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
 {
 	struct fib *fibptr;
 
-	fibptr = &dev->fibs[scmd->request->tag];
+	fibptr = &dev->fibs[blk_req(scmd)->tag];
 	/*
 	 *	Null out fields that depend on being zero at the start of
 	 *	each I/O

[PATCH 14/50] advansys: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/advansys.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 800052f10699..e9ec10c466f3 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7427,7 +7427,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
 	 * Set the srb_tag to the command tag + 1, as
 	 * srb_tag '0' is used internally by the chip.
 	 */
-	srb_tag = scp->request->tag + 1;
+	srb_tag = blk_req(scp)->tag + 1;
 	asc_scsi_q->q2.srb_tag = srb_tag;
 
 	/*
@@ -7641,7 +7641,7 @@ static int
 adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
 	      adv_req_t **adv_reqpp)
 {
-	u32 srb_tag = scp->request->tag;
+	u32 srb_tag = blk_req(scp)->tag;
 	adv_req_t *reqp;
 	ADV_SCSI_REQ_Q *scsiqp;
 	int ret;

[PATCH 15/50] bnx2i: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 43e8a1dafec0..70e9a8e6329d 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1918,7 +1918,7 @@ static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session,
 
 	spin_unlock(&session->back_lock);
 
-	p = &per_cpu(bnx2i_percpu, blk_mq_rq_cpu(sc->request));
+	p = &per_cpu(bnx2i_percpu, blk_mq_rq_cpu(blk_req(sc)));
 	spin_lock(&p->p_work_lock);
 	if (unlikely(!p->iothread)) {
 		rc = -EINVAL;

[PATCH 16/50] csiostor: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/csiostor/csio_scsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index 56b9ad0a1ca0..234e0baec091 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -1786,7 +1786,7 @@ csio_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmnd)
 	struct csio_scsi_qset *sqset;
 	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
 
-	sqset = &hw->sqset[ln->portid][blk_mq_rq_cpu(cmnd->request)];
+	sqset = &hw->sqset[ln->portid][blk_mq_rq_cpu(blk_req(cmnd))];
 
 	nr = fc_remote_port_chkready(rport);
 	if (nr) {
@@ -1989,13 +1989,13 @@ csio_eh_abort_handler(struct scsi_cmnd *cmnd)
 		csio_info(hw,
 			"Aborted SCSI command to (%d:%llu) tag %u\n",
 			cmnd->device->id, cmnd->device->lun,
-			cmnd->request->tag);
+			blk_req(cmnd)->tag);
 		return SUCCESS;
 	} else {
 		csio_info(hw,
 			"Failed to abort SCSI command, (%d:%llu) tag %u\n",
 			cmnd->device->id, cmnd->device->lun,
-			cmnd->request->tag);
+			blk_req(cmnd)->tag);
 		return FAILED;
 	}
 }

[PATCH 17/50] cxlflash: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/cxlflash/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 222593bc2afe..c3f5df2f3509 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -433,7 +433,7 @@ static u32 cmd_to_target_hwq(struct Scsi_Host *host, struct scsi_cmnd *scp,
 		hwq = afu->hwq_rr_count++ % afu->num_hwqs;
 		break;
 	case HWQ_MODE_TAG:
-		tag = blk_mq_unique_tag(scp->request);
+		tag = blk_mq_unique_tag(blk_req(scp));
 		hwq = blk_mq_unique_tag_to_hwq(tag);
 		break;
 	case HWQ_MODE_CPU:

[PATCH 18/50] dpt_i2o: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/dpt_i2o.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index a18a4a08f049..75fbbd939b4a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -652,7 +652,7 @@ static int adpt_abort(struct scsi_cmnd * cmd)
 	msg[2] = 0;
 	msg[3]= 0;
 	/* Add 1 to avoid firmware treating it as invalid command */
-	msg[4] = cmd->request->tag + 1;
+	msg[4] = blk_req(cmd)->tag + 1;
 	if (pHba->host)
 		spin_lock_irq(pHba->host->host_lock);
 	rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER);
@@ -2236,7 +2236,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
 	msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid);
 	msg[2] = 0;
 	/* Add 1 to avoid firmware treating it as invalid command */
-	msg[3] = cmd->request->tag + 1;
+	msg[3] = blk_req(cmd)->tag + 1;
 	// Our cards use the transaction context as the tag for queueing
 	// Adaptec/DPT Private stuff 
 	msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16);

[PATCH 19/50] fnic: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/fnic/fnic_scsi.c | 40 ++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 762cc8bd2653..5a0dcea64ad3 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -107,7 +107,7 @@ static void fnic_cleanup_io(struct fnic *fnic);
 static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
 					    struct scsi_cmnd *sc)
 {
-	u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
+	u32 hash = blk_req(sc)->tag & (FNIC_IO_LOCKS - 1);
 
 	return &fnic->io_req_lock[hash];
 }
@@ -390,7 +390,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 	    (rp->flags & FC_RP_FLAGS_RETRY))
 		exch_flags |= FCPIO_ICMND_SRFLAG_RETRY;
 
-	fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag,
+	fnic_queue_wq_copy_desc_icmnd_16(wq, blk_req(sc)->tag,
 					 0, exch_flags, io_req->sgl_cnt,
 					 SCSI_SENSE_BUFFERSIZE,
 					 io_req->sgl_list_pa,
@@ -511,7 +511,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 	sg_count = scsi_dma_map(sc);
 	if (sg_count < 0) {
 		FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
-			  sc->request->tag, sc, 0, sc->cmnd[0],
+			  blk_req(sc)->tag, sc, 0, sc->cmnd[0],
 			  sg_count, CMD_STATE(sc));
 		mempool_free(io_req, fnic->io_req_pool);
 		goto out;
@@ -571,7 +571,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 		 * refetch the pointer under the lock.
 		 */
 		FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
-			  sc->request->tag, sc, 0, 0, 0,
+			  blk_req(sc)->tag, sc, 0, 0, 0,
 			  (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
 		io_req = (struct fnic_io_req *)CMD_SP(sc);
 		CMD_SP(sc) = NULL;
@@ -603,7 +603,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 			sc->cmnd[5]);
 
 	FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
-		  sc->request->tag, sc, io_req,
+		  blk_req(sc)->tag, sc, io_req,
 		  sg_count, cmd_trace,
 		  (((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc)));
 
@@ -1371,7 +1371,7 @@ static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
 	unsigned long start_time = 0;
 	struct fnic_stats *fnic_stats = &fnic->fnic_stats;
 
-	io_lock = fnic_io_lock_tag(fnic, sc->request->tag);
+	io_lock = fnic_io_lock_tag(fnic, blk_req(sc)->tag);
 	spin_lock_irqsave(io_lock, flags);
 
 	io_req = (struct fnic_io_req *)CMD_SP(sc);
@@ -1413,7 +1413,7 @@ static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
 	sc->result = DID_TRANSPORT_DISRUPTED << 16;
 	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
 		      "fnic_cleanup_io: tag:0x%x : sc:0x%p duration = %lu DID_TRANSPORT_DISRUPTED\n",
-		      sc->request->tag, sc, (jiffies - start_time));
+		      blk_req(sc)->tag, sc, jiffies - start_time);
 
 	if (atomic64_read(&fnic->io_cmpl_skip))
 		atomic64_dec(&fnic->io_cmpl_skip);
@@ -1425,10 +1425,10 @@ static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
 		if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED))
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "Calling done for IO not issued to fw: tag:0x%x sc:0x%p\n",
-				     sc->request->tag, sc);
+				     blk_req(sc)->tag, sc);
 
 		FNIC_TRACE(fnic_cleanup_io,
-			   sc->device->host->host_no, sc->request->tag, sc,
+			   sc->device->host->host_no, blk_req(sc)->tag, sc,
 			   jiffies_to_msecs(jiffies - start_time),
 			   0, ((u64)sc->cmnd[0] << 32 |
 			       (u64)sc->cmnd[2] << 24 |
@@ -1566,7 +1566,7 @@ static bool fnic_rport_abort_io_iter(struct scsi_cmnd *sc, void *data,
 {
 	struct fnic_rport_abort_io_iter_data *iter_data = data;
 	struct fnic *fnic = iter_data->fnic;
-	int abt_tag = sc->request->tag;
+	int abt_tag = blk_req(sc)->tag;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
@@ -1757,7 +1757,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 	term_stats = &fnic->fnic_stats.term_stats;
 
 	rport = starget_to_rport(scsi_target(sc->device));
-	tag = sc->request->tag;
+	tag = blk_req(sc)->tag;
 	FNIC_SCSI_DBG(KERN_DEBUG,
 		fnic->lport->host,
 		"Abort Cmd called FCID 0x%x, LUN 0x%llx TAG %x flags %x\n",
@@ -1842,7 +1842,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 	/* Now queue the abort command to firmware */
 	int_to_scsilun(sc->device->lun, &fc_lun);
 
-	if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
+	if (fnic_queue_abort_io_req(fnic, blk_req(sc)->tag, task_req,
 				    fc_lun.scsi_lun, io_req)) {
 		spin_lock_irqsave(io_lock, flags);
 		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
@@ -1944,7 +1944,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 
 fnic_abort_cmd_end:
 	FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no,
-		  sc->request->tag, sc,
+		  blk_req(sc)->tag, sc,
 		  jiffies_to_msecs(jiffies - start_time),
 		  0, ((u64)sc->cmnd[0] << 32 |
 		  (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |
@@ -1994,7 +1994,7 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic,
 	/* fill in the lun info */
 	int_to_scsilun(sc->device->lun, &fc_lun);
 
-	fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST,
+	fnic_queue_wq_copy_desc_itmf(wq, blk_req(sc)->tag | FNIC_TAG_DEV_RST,
 				     0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG,
 				     fc_lun.scsi_lun, io_req->port_id,
 				     fnic->config.ra_tov, fnic->config.ed_tov);
@@ -2025,7 +2025,7 @@ static bool fnic_pending_aborts_iter(struct scsi_cmnd *sc,
 	struct fnic_pending_aborts_iter_data *iter_data = data;
 	struct fnic *fnic = iter_data->fnic;
 	struct scsi_device *lun_dev = iter_data->lun_dev;
-	int abt_tag = sc->request->tag;
+	int abt_tag = blk_req(sc)->tag;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
@@ -2206,14 +2206,16 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 static inline int
 fnic_scsi_host_start_tag(struct fnic *fnic, struct scsi_cmnd *sc)
 {
-	struct request_queue *q = sc->request->q;
+	struct request_queue *q = blk_req(sc)->q;
 	struct request *dummy;
 
 	dummy = blk_mq_alloc_request(q, REQ_OP_WRITE, BLK_MQ_REQ_NOWAIT);
 	if (IS_ERR(dummy))
 		return SCSI_NO_TAG;
 
-	sc->tag = sc->request->tag = dummy->tag;
+	WARN_ON_ONCE(blk_req(sc)->tag);
+	WARN_ON_ONCE(sc->tag);
+	sc->tag = blk_req(sc)->tag = dummy->tag;
 	sc->host_scribble = (unsigned char *)dummy;
 
 	return dummy->tag;
@@ -2284,7 +2286,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 	CMD_FLAGS(sc) = FNIC_DEVICE_RESET;
 	/* Allocate tag if not present */
 
-	tag = sc->request->tag;
+	tag = blk_req(sc)->tag;
 	if (unlikely(tag < 0)) {
 		/*
 		 * Really should fix the midlayer to pass in a proper
@@ -2459,7 +2461,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 
 fnic_device_reset_end:
 	FNIC_TRACE(fnic_device_reset, sc->device->host->host_no,
-		  sc->request->tag, sc,
+		  blk_req(sc)->tag, sc,
 		  jiffies_to_msecs(jiffies - start_time),
 		  0, ((u64)sc->cmnd[0] << 32 |
 		  (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |

[PATCH 20/50] hisi_sas: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 4 ++--
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 5a204074099c..9a93a3374d65 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -185,7 +185,7 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba,
 	void *bitmap = hisi_hba->slot_index_tags;
 
 	if (scsi_cmnd)
-		return scsi_cmnd->request->tag;
+		return blk_req(scsi_cmnd)->tag;
 
 	spin_lock(&hisi_hba->lock);
 	index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
@@ -449,7 +449,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		unsigned int dq_index;
 		u32 blk_tag;
 
-		blk_tag = blk_mq_unique_tag(scmd->request);
+		blk_tag = blk_mq_unique_tag(blk_req(scmd));
 		dq_index = blk_mq_unique_tag_to_hwq(blk_tag);
 		*dq_pointer = dq = &hisi_hba->dq[dq_index];
 	} else {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 499c770d405c..ed02eecd606d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1153,7 +1153,7 @@ static void fill_prot_v3_hw(struct scsi_cmnd *scsi_cmnd,
 {
 	unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
 	unsigned int interval = scsi_prot_interval(scsi_cmnd);
-	u32 lbrt_chk_val = t10_pi_ref_tag(scsi_cmnd->request);
+	u32 lbrt_chk_val = t10_pi_ref_tag(blk_req(scsi_cmnd));
 
 	switch (prot_op) {
 	case SCSI_PROT_READ_INSERT:

[PATCH 21/50] hpsa: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/hpsa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index f135a10f582b..9fcbe9a84de6 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5686,7 +5686,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	/* Get the ptr to our adapter structure out of cmd->host. */
 	h = sdev_to_hba(cmd->device);
 
-	BUG_ON(cmd->request->tag < 0);
+	BUG_ON(blk_req(cmd)->tag < 0);
 
 	dev = cmd->device->hostdata;
 	if (!dev) {
@@ -5729,7 +5729,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	 *       and is therefore a brand-new command.
 	 */
 	if (likely(cmd->retries == 0 &&
-			!blk_rq_is_passthrough(cmd->request) &&
+			!blk_rq_is_passthrough(blk_req(cmd)) &&
 			h->acciopath_status)) {
 		/* Submit with the retry_pending flag unset. */
 		rc = hpsa_ioaccel_submit(h, c, cmd, false);
@@ -5894,7 +5894,7 @@ static int hpsa_scsi_add_host(struct ctlr_info *h)
  */
 static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
 {
-	int idx = scmd->request->tag;
+	int idx = blk_req(scmd)->tag;
 
 	if (idx < 0)
 		return idx;

[PATCH 22/50] ibmvfc: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 6540d48eb0e8..e8b4f72f9161 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1908,7 +1908,7 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 	struct ibmvfc_cmd *vfc_cmd;
 	struct ibmvfc_fcp_cmd_iu *iu;
 	struct ibmvfc_event *evt;
-	u32 tag_and_hwq = blk_mq_unique_tag(cmnd->request);
+	u32 tag_and_hwq = blk_mq_unique_tag(blk_req(cmnd));
 	u16 hwq = blk_mq_unique_tag_to_hwq(tag_and_hwq);
 	u16 scsi_channel;
 	int rc;

[PATCH 23/50] ibmvscsi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index e75b0068ad84..48e07b8a6b63 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1072,7 +1072,7 @@ static int ibmvscsi_queuecommand_lck(struct scsi_cmnd *cmnd,
 	init_event_struct(evt_struct,
 			  handle_cmd_rsp,
 			  VIOSRP_SRP_FORMAT,
-			  cmnd->request->timeout/HZ);
+			  blk_req(cmnd)->timeout / HZ);
 
 	evt_struct->cmnd = cmnd;
 	evt_struct->cmnd_done = done;

[PATCH 24/50] ips: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ips.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index bc33d54a4011..6bcc655d1f15 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3733,7 +3733,7 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb)
 		scb->cmd.dcdb.segment_4G = 0;
 		scb->cmd.dcdb.enhanced_sg = 0;
 
-		TimeOut = scb->scsi_cmd->request->timeout;
+		TimeOut = blk_req(scb->scsi_cmd)->timeout;
 
 		if (ha->subsys->param[4] & 0x00100000) {	/* If NEW Tape DCDB is Supported */
 			if (!scb->sg_len) {

[PATCH 25/50] libsas: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/libsas/sas_ata.c       | 2 +-
 drivers/scsi/libsas/sas_scsi_host.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index e9a86128f1f1..6736e69f4062 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -595,7 +595,7 @@ void sas_ata_task_abort(struct sas_task *task)
 
 	/* Bounce SCSI-initiated commands to the SCSI EH */
 	if (qc->scsicmd) {
-		blk_abort_request(qc->scsicmd->request);
+		blk_abort_request(blk_req(qc->scsicmd));
 		return;
 	}
 
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1bf939818c98..438f14f7c1a0 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -908,7 +908,7 @@ void sas_task_abort(struct sas_task *task)
 	if (dev_is_sata(task->dev))
 		sas_ata_task_abort(task);
 	else
-		blk_abort_request(sc->request);
+		blk_abort_request(blk_req(sc));
 }
 
 void sas_target_destroy(struct scsi_target *starget)

[PATCH 26/50] lpfc: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 63 +++++++++++++++++------------------
 1 file changed, 31 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index eefbb9b22798..b9716237bdbe 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -648,7 +648,7 @@ lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 
 	cpu = raw_smp_processor_id();
 	if (cmnd && phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_HDWQ) {
-		tag = blk_mq_unique_tag(cmnd->request);
+		tag = blk_mq_unique_tag(blk_req(cmnd));
 		idx = blk_mq_unique_tag_to_hwq(tag);
 	} else {
 		idx = phba->sli4_hba.cpu_map[cpu].hdwq;
@@ -1010,7 +1010,7 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		return 0;
 
 	sgpe = scsi_prot_sglist(sc);
-	lba = t10_pi_ref_tag(sc->request);
+	lba = t10_pi_ref_tag(blk_req(sc));
 	if (lba == LPFC_INVALID_REFTAG)
 		return 0;
 
@@ -1593,7 +1593,7 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		goto out;
 
 	/* extract some info from the scsi command for pde*/
-	reftag = t10_pi_ref_tag(sc->request);
+	reftag = t10_pi_ref_tag(blk_req(sc));
 	if (reftag == LPFC_INVALID_REFTAG)
 		goto out;
 
@@ -1756,7 +1756,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command */
 	blksize = lpfc_cmd_blksize(sc);
-	reftag = t10_pi_ref_tag(sc->request);
+	reftag = t10_pi_ref_tag(blk_req(sc));
 	if (reftag == LPFC_INVALID_REFTAG)
 		goto out;
 
@@ -1987,7 +1987,7 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		goto out;
 
 	/* extract some info from the scsi command for pde*/
-	reftag = t10_pi_ref_tag(sc->request);
+	reftag = t10_pi_ref_tag(blk_req(sc));
 	if (reftag == LPFC_INVALID_REFTAG)
 		goto out;
 
@@ -2188,7 +2188,7 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command */
 	blksize = lpfc_cmd_blksize(sc);
-	reftag = t10_pi_ref_tag(sc->request);
+	reftag = t10_pi_ref_tag(blk_req(sc));
 	if (reftag == LPFC_INVALID_REFTAG)
 		goto out;
 
@@ -2782,7 +2782,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 			chk_guard = 1;
 
 		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
-		start_ref_tag = t10_pi_ref_tag(cmd->request);
+		start_ref_tag = t10_pi_ref_tag(blk_req(cmd));
 		if (start_ref_tag == LPFC_INVALID_REFTAG)
 			goto out;
 		start_app_tag = src->app_tag;
@@ -2876,7 +2876,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 		phba->bg_guard_err_cnt++;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
 				"9069 BLKGRD: reftag %x grd_tag err %x != %x\n",
-				t10_pi_ref_tag(cmd->request),
+				t10_pi_ref_tag(blk_req(cmd)),
 				sum, guard_tag);
 
 	} else if (err_type == BGS_REFTAG_ERR_MASK) {
@@ -2888,7 +2888,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 		phba->bg_reftag_err_cnt++;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
 				"9066 BLKGRD: reftag %x ref_tag err %x != %x\n",
-				t10_pi_ref_tag(cmd->request),
+				t10_pi_ref_tag(blk_req(cmd)),
 				ref_tag, start_ref_tag);
 
 	} else if (err_type == BGS_APPTAG_ERR_MASK) {
@@ -2900,7 +2900,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 		phba->bg_apptag_err_cnt++;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
 				"9041 BLKGRD: reftag %x app_tag err %x != %x\n",
-				t10_pi_ref_tag(cmd->request),
+				t10_pi_ref_tag(blk_req(cmd)),
 				app_tag, start_app_tag);
 	}
 }
@@ -2964,7 +2964,7 @@ lpfc_sli4_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				" 0x%x lba 0x%llx blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
 				(unsigned long long)scsi_get_lba(cmd),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 	}
 
 	if (lpfc_bgs_get_reftag_err(bgstat)) {
@@ -2981,7 +2981,7 @@ lpfc_sli4_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				" 0x%x lba 0x%llx blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
 				(unsigned long long)scsi_get_lba(cmd),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 	}
 
 	if (lpfc_bgs_get_apptag_err(bgstat)) {
@@ -2998,7 +2998,7 @@ lpfc_sli4_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				" 0x%x lba 0x%llx blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
 				(unsigned long long)scsi_get_lba(cmd),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 	}
 
 	if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
@@ -3042,7 +3042,7 @@ lpfc_sli4_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				" 0x%x lba 0x%llx blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
 				(unsigned long long)scsi_get_lba(cmd),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 
 		/* Calcuate what type of error it was */
 		lpfc_calc_bg_err(phba, lpfc_cmd);
@@ -3079,8 +3079,8 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				"9072 BLKGRD: Invalid BG Profile in cmd "
 				"0x%x reftag 0x%x blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
-				t10_pi_ref_tag(cmd->request),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				t10_pi_ref_tag(blk_req(cmd)),
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 		ret = (-1);
 		goto out;
 	}
@@ -3091,8 +3091,8 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				"9073 BLKGRD: Invalid BG PDIF Block in cmd "
 				"0x%x reftag 0x%x blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
-				t10_pi_ref_tag(cmd->request),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				t10_pi_ref_tag(blk_req(cmd)),
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 		ret = (-1);
 		goto out;
 	}
@@ -3109,8 +3109,8 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				"9055 BLKGRD: Guard Tag error in cmd "
 				"0x%x reftag 0x%x blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
-				t10_pi_ref_tag(cmd->request),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				t10_pi_ref_tag(blk_req(cmd)),
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 	}
 
 	if (lpfc_bgs_get_reftag_err(bgstat)) {
@@ -3126,8 +3126,8 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				"9056 BLKGRD: Ref Tag error in cmd "
 				"0x%x reftag 0x%x blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
-				t10_pi_ref_tag(cmd->request),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				t10_pi_ref_tag(blk_req(cmd)),
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 	}
 
 	if (lpfc_bgs_get_apptag_err(bgstat)) {
@@ -3143,8 +3143,8 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				"9061 BLKGRD: App Tag error in cmd "
 				"0x%x reftag 0x%x blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
-				t10_pi_ref_tag(cmd->request),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				t10_pi_ref_tag(blk_req(cmd)),
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 	}
 
 	if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
@@ -3187,8 +3187,8 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
 				"9057 BLKGRD: Unknown error in cmd "
 				"0x%x reftag 0x%x blk cnt 0x%x "
 				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
-				t10_pi_ref_tag(cmd->request),
-				blk_rq_sectors(cmd->request), bgstat, bghm);
+				t10_pi_ref_tag(blk_req(cmd)),
+				blk_rq_sectors(blk_req(cmd)), bgstat, bghm);
 
 		/* Calcuate what type of error it was */
 		lpfc_calc_bg_err(phba, lpfc_cmd);
@@ -5269,8 +5269,8 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 					 "reftag x%x cnt %u pt %x\n",
 					 dif_op_str[scsi_get_prot_op(cmnd)],
 					 cmnd->cmnd[0],
-					 t10_pi_ref_tag(cmnd->request),
-					 blk_rq_sectors(cmnd->request),
+					 t10_pi_ref_tag(blk_req(cmnd)),
+					 blk_rq_sectors(blk_req(cmnd)),
 					 (cmnd->cmnd[1]>>5));
 		}
 		err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
@@ -5281,8 +5281,8 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 					 "9038 BLKGRD: rcvd PROT_NORMAL cmd: "
 					 "x%x reftag x%x cnt %u pt %x\n",
 					 cmnd->cmnd[0],
-					 t10_pi_ref_tag(cmnd->request),
-					 blk_rq_sectors(cmnd->request),
+					 t10_pi_ref_tag(blk_req(cmnd)),
+					 blk_rq_sectors(blk_req(cmnd)),
 					 (cmnd->cmnd[1]>>5));
 		}
 		err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
@@ -5334,8 +5334,7 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 				   bf_get(wqe_tmo,
 				   &lpfc_cmd->cur_iocbq.wqe.generic.wqe_com) :
 				   lpfc_cmd->cur_iocbq.iocb.ulpTimeout,
-				   (uint32_t)
-				   (cmnd->request->timeout / 1000));
+				   (uint32_t)(blk_req(cmnd)->timeout / 1000));
 
 		goto out_host_busy_free_buf;
 	}

[PATCH 27/50] megaraid: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c   |  4 ++--
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 10 +++++-----
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 8ed347eebf07..94218c573c0e 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1443,10 +1443,10 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
 	 * pthru timeout to the os layer timeout value.
 	 */
 	if (scp->device->type == TYPE_TAPE) {
-		if ((scp->request->timeout / HZ) > 0xFFFF)
+		if (blk_req(scp)->timeout / HZ > 0xFFFF)
 			pthru->timeout = cpu_to_le16(0xFFFF);
 		else
-			pthru->timeout = cpu_to_le16(scp->request->timeout / HZ);
+			pthru->timeout = cpu_to_le16(blk_req(scp)->timeout / HZ);
 	}
 
 	/*
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 2221175ae051..5a28d6b96eb2 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -402,7 +402,7 @@ megasas_get_msix_index(struct megasas_instance *instance,
 			(mega_mod64(atomic64_add_return(1, &instance->total_io_count),
 				instance->msix_vectors));
 	} else if (instance->host->nr_hw_queues > 1) {
-		u32 tag = blk_mq_unique_tag(scmd->request);
+		u32 tag = blk_mq_unique_tag(blk_req(scmd));
 
 		cmd->request_desc->SCSIIO.MSIxIndex = blk_mq_unique_tag_to_hwq(tag) +
 			instance->low_latency_index_start;
@@ -3024,7 +3024,7 @@ static void megasas_build_ld_nonrw_fusion(struct megasas_instance *instance,
 		io_request->DevHandle = cpu_to_le16(device_id);
 		io_request->LUN[1] = scmd->device->lun;
 		pRAID_Context->timeout_value =
-			cpu_to_le16 (scmd->request->timeout / HZ);
+			cpu_to_le16(blk_req(scmd)->timeout / HZ);
 		cmd->request_desc->SCSIIO.RequestFlags =
 			(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
 			MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
@@ -3087,7 +3087,7 @@ megasas_build_syspd_fusion(struct megasas_instance *instance,
 
 	device_id = MEGASAS_DEV_INDEX(scmd);
 	pd_index = MEGASAS_PD_INDEX(scmd);
-	os_timeout_value = scmd->request->timeout / HZ;
+	os_timeout_value = blk_req(scmd)->timeout / HZ;
 	mr_device_priv_data = scmd->device->hostdata;
 	cmd->pd_interface = mr_device_priv_data->interface_type;
 
@@ -3376,7 +3376,7 @@ megasas_build_and_issue_cmd_fusion(struct megasas_instance *instance,
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
 
-	cmd = megasas_get_cmd_fusion(instance, scmd->request->tag);
+	cmd = megasas_get_cmd_fusion(instance, blk_req(scmd)->tag);
 
 	if (!cmd) {
 		atomic_dec(&instance->fw_outstanding);
@@ -3417,7 +3417,7 @@ megasas_build_and_issue_cmd_fusion(struct megasas_instance *instance,
 	 */
 	if (cmd->r1_alt_dev_handle != MR_DEVHANDLE_INVALID) {
 		r1_cmd = megasas_get_cmd_fusion(instance,
-				(scmd->request->tag + instance->max_fw_cmds));
+				blk_req(scmd)->tag + instance->max_fw_cmds);
 		megasas_prepare_secondRaid1_IO(instance, cmd, r1_cmd);
 	}
 

[PATCH 28/50] mpt3sas: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c  | 4 ++--
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 68fde055b02f..88ffd1df7da4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3649,7 +3649,7 @@ _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc,
 		    &ioc->total_io_cnt), ioc->reply_queue_count) : 0;
 
 	if (scmd && ioc->shost->nr_hw_queues > 1) {
-		u32 tag = blk_mq_unique_tag(scmd->request);
+		u32 tag = blk_mq_unique_tag(blk_req(scmd));
 
 		return blk_mq_unique_tag_to_hwq(tag) +
 			ioc->high_iops_queues;
@@ -3733,7 +3733,7 @@ mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
 	u16 smid;
 	u32 tag, unique_tag;
 
-	unique_tag = blk_mq_unique_tag(scmd->request);
+	unique_tag = blk_mq_unique_tag(blk_req(scmd));
 	tag = blk_mq_unique_tag_to_tag(unique_tag);
 
 	/*
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index d00aca3c77ce..5d617bb74ddc 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3303,7 +3303,7 @@ scsih_abort(struct scsi_cmnd *scmd)
 	sdev_printk(KERN_INFO, scmd->device, "attempting task abort!"
 	    "scmd(0x%p), outstanding for %u ms & timeout %u ms\n",
 	    scmd, jiffies_to_msecs(jiffies - scmd->jiffies_at_alloc),
-	    (scmd->request->timeout / HZ) * 1000);
+	    (blk_req(scmd)->timeout / HZ) * 1000);
 	_scsih_tm_display_info(ioc, scmd);
 
 	sas_device_priv_data = scmd->device->hostdata;
@@ -5032,7 +5032,7 @@ _scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
 		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
 		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
-		    cpu_to_be32(t10_pi_ref_tag(scmd->request));
+		    cpu_to_be32(t10_pi_ref_tag(blk_req(scmd)));
 		break;
 
 	case SCSI_PROT_DIF_TYPE3:
@@ -5101,7 +5101,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	struct MPT3SAS_TARGET *sas_target_priv_data;
 	struct _raid_device *raid_device;
-	struct request *rq = scmd->request;
+	struct request *rq = blk_req(scmd);
 	int class;
 	Mpi25SCSIIORequest_t *mpi_request;
 	struct _pcie_device *pcie_device = NULL;

[PATCH 29/50] mvumi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/mvumi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
index 9d5743627604..0bdea0da8d4b 100644
--- a/drivers/scsi/mvumi.c
+++ b/drivers/scsi/mvumi.c
@@ -702,7 +702,7 @@ static int mvumi_host_reset(struct scsi_cmnd *scmd)
 	mhba = (struct mvumi_hba *) scmd->device->host->hostdata;
 
 	scmd_printk(KERN_NOTICE, scmd, "RESET -%u cmd=%x retries=%x\n",
-			scmd->request->tag, scmd->cmnd[0], scmd->retries);
+			blk_req(scmd)->tag, scmd->cmnd[0], scmd->retries);
 
 	return mhba->instancet->reset_host(mhba);
 }

[PATCH 30/50] myrb: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/myrb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index d9c82e211ae7..f7f8a8164a22 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1286,7 +1286,7 @@ static int myrb_pthru_queuecommand(struct Scsi_Host *shost,
 	}
 
 	mbox->type3.opcode = MYRB_CMD_DCDB;
-	mbox->type3.id = scmd->request->tag + 3;
+	mbox->type3.id = blk_req(scmd)->tag + 3;
 	mbox->type3.addr = dcdb_addr;
 	dcdb->channel = sdev->channel;
 	dcdb->target = sdev->id;
@@ -1305,11 +1305,11 @@ static int myrb_pthru_queuecommand(struct Scsi_Host *shost,
 		break;
 	}
 	dcdb->early_status = false;
-	if (scmd->request->timeout <= 10)
+	if (blk_req(scmd)->timeout <= 10)
 		dcdb->timeout = MYRB_DCDB_TMO_10_SECS;
-	else if (scmd->request->timeout <= 60)
+	else if (blk_req(scmd)->timeout <= 60)
 		dcdb->timeout = MYRB_DCDB_TMO_60_SECS;
-	else if (scmd->request->timeout <= 600)
+	else if (blk_req(scmd)->timeout <= 600)
 		dcdb->timeout = MYRB_DCDB_TMO_10_MINS;
 	else
 		dcdb->timeout = MYRB_DCDB_TMO_24_HRS;
@@ -1577,7 +1577,7 @@ static int myrb_ldev_queuecommand(struct Scsi_Host *shost,
 	}
 
 	myrb_reset_cmd(cmd_blk);
-	mbox->type5.id = scmd->request->tag + 3;
+	mbox->type5.id = blk_req(scmd)->tag + 3;
 	if (scmd->sc_data_direction == DMA_NONE)
 		goto submit;
 	nsge = scsi_dma_map(scmd);

[PATCH 31/50] myrs: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/myrs.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 3b68c68d1716..390940919b6c 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -1633,7 +1633,7 @@ static int myrs_queuecommand(struct Scsi_Host *shost,
 		return SCSI_MLQUEUE_HOST_BUSY;
 	cmd_blk->sense_addr = sense_addr;
 
-	timeout = scmd->request->timeout;
+	timeout = blk_req(scmd)->timeout;
 	if (scmd->cmd_len <= 10) {
 		if (scmd->device->channel >= cs->ctlr_info->physchan_present) {
 			struct myrs_ldev_info *ldev_info = sdev->hostdata;
@@ -1649,10 +1649,10 @@ static int myrs_queuecommand(struct Scsi_Host *shost,
 			mbox->SCSI_10.pdev.target = sdev->id;
 			mbox->SCSI_10.pdev.channel = sdev->channel;
 		}
-		mbox->SCSI_10.id = scmd->request->tag + 3;
+		mbox->SCSI_10.id = blk_req(scmd)->tag + 3;
 		mbox->SCSI_10.control.dma_ctrl_to_host =
 			(scmd->sc_data_direction == DMA_FROM_DEVICE);
-		if (scmd->request->cmd_flags & REQ_FUA)
+		if (blk_req(scmd)->cmd_flags & REQ_FUA)
 			mbox->SCSI_10.control.fua = true;
 		mbox->SCSI_10.dma_size = scsi_bufflen(scmd);
 		mbox->SCSI_10.sense_addr = cmd_blk->sense_addr;
@@ -1695,10 +1695,10 @@ static int myrs_queuecommand(struct Scsi_Host *shost,
 			mbox->SCSI_255.pdev.target = sdev->id;
 			mbox->SCSI_255.pdev.channel = sdev->channel;
 		}
-		mbox->SCSI_255.id = scmd->request->tag + 3;
+		mbox->SCSI_255.id = blk_req(scmd)->tag + 3;
 		mbox->SCSI_255.control.dma_ctrl_to_host =
 			(scmd->sc_data_direction == DMA_FROM_DEVICE);
-		if (scmd->request->cmd_flags & REQ_FUA)
+		if (blk_req(scmd)->cmd_flags & REQ_FUA)
 			mbox->SCSI_255.control.fua = true;
 		mbox->SCSI_255.dma_size = scsi_bufflen(scmd);
 		mbox->SCSI_255.sense_addr = cmd_blk->sense_addr;

[PATCH 32/50] ncr53c8xx: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ncr53c8xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index c76e9f05d042..9bfa945dab42 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -4164,8 +4164,8 @@ static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd)
 	**
 	**----------------------------------------------------
 	*/
-	if (np->settle_time && cmd->request->timeout >= HZ) {
-		u_long tlimit = jiffies + cmd->request->timeout - HZ;
+	if (np->settle_time && blk_req(cmd)->timeout >= HZ) {
+		u_long tlimit = jiffies + blk_req(cmd)->timeout - HZ;
 		if (time_after(np->settle_time, tlimit))
 			np->settle_time = tlimit;
 	}

[PATCH 33/50] qedf: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qedf/qedf_io.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 4869ef813dc4..6883218df66b 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -1167,13 +1167,7 @@ void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		return;
 	}
 
-	if (!sc_cmd->request) {
-		QEDF_WARN(&(qedf->dbg_ctx), "sc_cmd->request is NULL, "
-		    "sc_cmd=%p.\n", sc_cmd);
-		return;
-	}
-
-	if (!sc_cmd->request->q) {
+	if (!blk_req(sc_cmd)->q) {
 		QEDF_WARN(&(qedf->dbg_ctx), "request->q is NULL so request "
 		   "is not valid, sc_cmd=%p.\n", sc_cmd);
 		return;

[PATCH 34/50] qedi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qedi/qedi_fw.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 440ddd2309f1..7af8e62739ac 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -611,14 +611,7 @@ static void qedi_scsi_completion(struct qedi_ctx *qedi,
 		goto error;
 	}
 
-	if (!sc_cmd->request) {
-		QEDI_WARN(&qedi->dbg_ctx,
-			  "sc_cmd->request is NULL, sc_cmd=%p.\n",
-			  sc_cmd);
-		goto error;
-	}
-
-	if (!sc_cmd->request->q) {
+	if (!blk_req(sc_cmd)->q) {
 		QEDI_WARN(&qedi->dbg_ctx,
 			  "request->q is NULL so request is not valid, sc_cmd=%p.\n",
 			  sc_cmd);

[PATCH 35/50] qla1280: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qla1280.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 928da90b79be..a9a8e1e9c253 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -490,7 +490,7 @@ __setup("qla1280=", qla1280_setup);
 #define	CMD_SNSLEN(Cmnd)	SCSI_SENSE_BUFFERSIZE
 #define	CMD_RESULT(Cmnd)	Cmnd->result
 #define	CMD_HANDLE(Cmnd)	Cmnd->host_scribble
-#define CMD_REQUEST(Cmnd)	Cmnd->request->cmd
+#define CMD_REQUEST(Cmnd)	blk_req(Cmnd)->cmd
 
 #define CMD_HOST(Cmnd)		Cmnd->device->host
 #define SCSI_BUS_32(Cmnd)	Cmnd->device->channel
@@ -2827,7 +2827,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 	memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
 
 	/* Set ISP command timeout. */
-	pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ);
+	pkt->timeout = cpu_to_le16(blk_req(cmd)->timeout / HZ);
 
 	/* Set device target ID and LUN */
 	pkt->lun = SCSI_LUN_32(cmd);
@@ -3082,7 +3082,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 	memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
 
 	/* Set ISP command timeout. */
-	pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ);
+	pkt->timeout = cpu_to_le16(blk_req(cmd)->timeout / HZ);
 
 	/* Set device target ID and LUN */
 	pkt->lun = SCSI_LUN_32(cmd);

[PATCH 36/50] qla2xxx: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4eab564ea6a0..454857fd25d6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -849,7 +849,7 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 		uint16_t hwq;
 		struct qla_qpair *qpair = NULL;
 
-		tag = blk_mq_unique_tag(cmd->request);
+		tag = blk_mq_unique_tag(blk_req(cmd));
 		hwq = blk_mq_unique_tag_to_hwq(tag);
 		qpair = ha->queue_pair_map[hwq];
 
@@ -1742,7 +1742,7 @@ static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res,
 		}
 
 		spin_lock_irqsave(qp->qp_lock_ptr, *flags);
-		if (ret_cmd && blk_mq_request_started(cmd->request))
+		if (ret_cmd && blk_mq_request_started(blk_req(cmd)))
 			sp->done(sp, res);
 	} else {
 		sp->done(sp, res);

[PATCH 37/50] qla4xxx: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qla4xxx/ql4_iocb.c | 2 +-
 drivers/scsi/qla4xxx/ql4_os.c   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index cbd1e6ffcd67..eac4b201360b 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -288,7 +288,7 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
 	/* Acquire hardware specific lock */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
-	index = (uint32_t)cmd->request->tag;
+	index = blk_req(cmd)->tag;
 
 	/*
 	 * Check to see if adapter is online before placing request on
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index ad3afe30f617..8429ac66305d 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -9282,7 +9282,7 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
 	DEBUG2(printk(KERN_INFO
 		      "scsi%ld: DEVICE_RESET cmd=%p jiffies = 0x%lx, to=%x,"
 		      "dpc_flags=%lx, status=%x allowed=%d\n", ha->host_no,
-		      cmd, jiffies, cmd->request->timeout / HZ,
+		      cmd, jiffies, blk_req(cmd)->timeout / HZ,
 		      ha->dpc_flags, cmd->result, cmd->allowed));
 
 	rval = qla4xxx_isp_check_reg(ha);
@@ -9349,7 +9349,7 @@ static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd)
 	DEBUG2(printk(KERN_INFO
 		      "scsi%ld: TARGET_DEVICE_RESET cmd=%p jiffies = 0x%lx, "
 		      "to=%x,dpc_flags=%lx, status=%x allowed=%d\n",
-		      ha->host_no, cmd, jiffies, cmd->request->timeout / HZ,
+		      ha->host_no, cmd, jiffies, blk_req(cmd)->timeout / HZ,
 		      ha->dpc_flags, cmd->result, cmd->allowed));
 
 	rval = qla4xxx_isp_check_reg(ha);

[PATCH 38/50] qlogicpti: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qlogicpti.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index d84e218d32cb..d7cd7dda24ce 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -890,7 +890,7 @@ static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd,
 		cmd->control_flags |= CFLAG_WRITE;
 	else
 		cmd->control_flags |= CFLAG_READ;
-	cmd->time_out = Cmnd->request->timeout/HZ;
+	cmd->time_out = blk_req(Cmnd)->timeout / HZ;
 	memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
 }
 

[PATCH 39/50] scsi_debug: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_debug.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index a5d1633b5bd8..12b4f407143c 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -4705,7 +4705,7 @@ static int resp_rwp_zone(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 static struct sdebug_queue *get_queue(struct scsi_cmnd *cmnd)
 {
 	u16 hwq;
-	u32 tag = blk_mq_unique_tag(cmnd->request);
+	u32 tag = blk_mq_unique_tag(blk_req(cmnd));
 
 	hwq = blk_mq_unique_tag_to_hwq(tag);
 
@@ -4718,7 +4718,7 @@ static struct sdebug_queue *get_queue(struct scsi_cmnd *cmnd)
 
 static u32 get_tag(struct scsi_cmnd *cmnd)
 {
-	return blk_mq_unique_tag(cmnd->request);
+	return blk_mq_unique_tag(blk_req(cmnd));
 }
 
 /* Queued (deferred) command completions converge here. */
@@ -5367,7 +5367,7 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
 {
 	bool new_sd_dp;
 	bool inject = false;
-	bool hipri = (cmnd->request->cmd_flags & REQ_HIPRI);
+	bool hipri = blk_req(cmnd)->cmd_flags & REQ_HIPRI;
 	int k, num_in_q, qdepth;
 	unsigned long iflags;
 	u64 ns_from_boot = 0;
@@ -5570,8 +5570,9 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
 		if (sdebug_statistics)
 			sd_dp->issuing_cpu = raw_smp_processor_id();
 		if (unlikely(sd_dp->aborted)) {
-			sdev_printk(KERN_INFO, sdp, "abort request tag %d\n", cmnd->request->tag);
-			blk_abort_request(cmnd->request);
+			sdev_printk(KERN_INFO, sdp, "abort request tag %d\n",
+				    blk_req(cmnd)->tag);
+			blk_abort_request(blk_req(cmnd));
 			atomic_set(&sdeb_inject_pending, 0);
 			sd_dp->aborted = false;
 		}
@@ -7397,7 +7398,7 @@ static int scsi_debug_queuecommand(struct Scsi_Host *shost,
 					       (u32)cmd[k]);
 		}
 		sdev_printk(KERN_INFO, sdp, "%s: tag=%#x, cmd %s\n", my_name,
-			    blk_mq_unique_tag(scp->request), b);
+			    blk_mq_unique_tag(blk_req(scp)), b);
 	}
 	if (unlikely(inject_now && (sdebug_opts & SDEBUG_OPT_HOST_BUSY)))
 		return SCSI_MLQUEUE_HOST_BUSY;

[PATCH 40/50] smartpqi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 5db16509b6e1..6d6594c9fc94 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -5569,7 +5569,7 @@ static inline u16 pqi_get_hw_queue(struct pqi_ctrl_info *ctrl_info,
 {
 	u16 hw_queue;
 
-	hw_queue = blk_mq_unique_tag_to_hwq(blk_mq_unique_tag(scmd->request));
+	hw_queue = blk_mq_unique_tag_to_hwq(blk_mq_unique_tag(blk_req(scmd)));
 	if (hw_queue > ctrl_info->max_hw_queue_index)
 		hw_queue = 0;
 
@@ -5578,7 +5578,7 @@ static inline u16 pqi_get_hw_queue(struct pqi_ctrl_info *ctrl_info,
 
 static inline bool pqi_is_bypass_eligible_request(struct scsi_cmnd *scmd)
 {
-	if (blk_rq_is_passthrough(scmd->request))
+	if (blk_rq_is_passthrough(blk_req(scmd)))
 		return false;
 
 	return scmd->SCp.this_residual == 0;

[PATCH 41/50] snic: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/snic/snic_scsi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c
index 6dd0ff188bb4..72175072351a 100644
--- a/drivers/scsi/snic/snic_scsi.c
+++ b/drivers/scsi/snic/snic_scsi.c
@@ -33,7 +33,7 @@
 #include "snic_io.h"
 #include "snic.h"
 
-#define snic_cmd_tag(sc)	(((struct scsi_cmnd *) sc)->request->tag)
+#define snic_cmd_tag(sc)	(blk_req(sc)->tag)
 
 const char *snic_state_str[] = {
 	[SNIC_INIT]	= "SNIC_INIT",
@@ -1636,7 +1636,7 @@ snic_abort_cmd(struct scsi_cmnd *sc)
 	u32 start_time = jiffies;
 
 	SNIC_SCSI_DBG(snic->shost, "abt_cmd:sc %p :0x%x :req = %p :tag = %d\n",
-		       sc, sc->cmnd[0], sc->request, tag);
+		       sc, sc->cmnd[0], blk_req(sc), tag);
 
 	if (unlikely(snic_get_state(snic) != SNIC_ONLINE)) {
 		SNIC_HOST_ERR(snic->shost,
@@ -2152,7 +2152,7 @@ snic_device_reset(struct scsi_cmnd *sc)
 	int dr_supp = 0;
 
 	SNIC_SCSI_DBG(shost, "dev_reset:sc %p :0x%x :req = %p :tag = %d\n",
-		      sc, sc->cmnd[0], sc->request,
+		      sc, sc->cmnd[0], blk_req(sc),
 		      snic_cmd_tag(sc));
 	dr_supp = snic_dev_reset_supported(sc->device);
 	if (!dr_supp) {
@@ -2387,7 +2387,7 @@ snic_host_reset(struct scsi_cmnd *sc)
 
 	SNIC_SCSI_DBG(shost,
 		      "host reset:sc %p sc_cmd 0x%x req %p tag %d flags 0x%llx\n",
-		      sc, sc->cmnd[0], sc->request,
+		      sc, sc->cmnd[0], blk_req(sc),
 		      snic_cmd_tag(sc), CMD_FLAGS(sc));
 
 	ret = snic_reset(shost, sc);
@@ -2494,7 +2494,7 @@ snic_scsi_cleanup(struct snic *snic, int ex_tag)
 		sc->result = DID_TRANSPORT_DISRUPTED << 16;
 		SNIC_HOST_INFO(snic->shost,
 			       "sc_clean: DID_TRANSPORT_DISRUPTED for sc %p, Tag %d flags 0x%llx rqi %p duration %u msecs\n",
-			       sc, sc->request->tag, CMD_FLAGS(sc), rqi,
+			       sc, blk_req(sc)->tag, CMD_FLAGS(sc), rqi,
 			       jiffies_to_msecs(jiffies - st_time));
 
 		/* Update IO stats */

[PATCH 42/50] stex: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/stex.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 12471208c7a8..8a4fad8c775d 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -543,7 +543,7 @@ stex_ss_send_cmd(struct st_hba *hba, struct req_msg *req, u16 tag)
 	msg_h = (struct st_msg_header *)req - 1;
 	if (likely(cmd)) {
 		msg_h->channel = (u8)cmd->device->channel;
-		msg_h->timeout = cpu_to_le16(cmd->request->timeout/HZ);
+		msg_h->timeout = cpu_to_le16(blk_req(cmd)->timeout / HZ);
 	}
 	addr = hba->dma_handle + hba->req_head * hba->rq_size;
 	addr += (hba->ccb[tag].sg_count+4)/11;
@@ -693,7 +693,7 @@ stex_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 
 	cmd->scsi_done = done;
 
-	tag = cmd->request->tag;
+	tag = blk_req(cmd)->tag;
 
 	if (unlikely(tag >= host->can_queue))
 		return SCSI_MLQUEUE_HOST_BUSY;
@@ -1249,7 +1249,7 @@ static int stex_abort(struct scsi_cmnd *cmd)
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct st_hba *hba = (struct st_hba *)host->hostdata;
-	u16 tag = cmd->request->tag;
+	u16 tag = blk_req(cmd)->tag;
 	void __iomem *base;
 	u32 data;
 	int result = SUCCESS;

[PATCH 43/50] sun3_scsi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sun3_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 2e3fbc2fae97..3cb543a369f6 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -336,7 +336,7 @@ static int sun3scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
 {
 	int wanted_len = cmd->SCp.this_residual;
 
-	if (wanted_len < DMA_MIN_SIZE || blk_rq_is_passthrough(cmd->request))
+	if (wanted_len < DMA_MIN_SIZE || blk_rq_is_passthrough(blk_req(cmd)))
 		return 0;
 
 	return wanted_len;

[PATCH 44/50] sym53c8xx: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sym53c8xx_2/sym_glue.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index d9a045f9858c..cb061d8559ee 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -502,8 +502,8 @@ static int sym53c8xx_queue_command_lck(struct scsi_cmnd *cmd,
 	 *  Shorten our settle_time if needed for 
 	 *  this command not to time out.
 	 */
-	if (np->s.settle_time_valid && cmd->request->timeout) {
-		unsigned long tlimit = jiffies + cmd->request->timeout;
+	if (np->s.settle_time_valid && blk_req(cmd)->timeout) {
+		unsigned long tlimit = jiffies + blk_req(cmd)->timeout;
 		tlimit -= SYM_CONF_TIMER_INTERVAL*2;
 		if (time_after(np->s.settle_time, tlimit)) {
 			np->s.settle_time = tlimit;

[PATCH 45/50] ufs: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ufs/ufshcd.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ab707a2c3796..18d8e48e739a 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -387,16 +387,16 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba, unsigned int tag,
 			 * Currently we only fully trace read(10) and write(10)
 			 * commands
 			 */
-			if (cmd->request && cmd->request->bio)
-				lba = cmd->request->bio->bi_iter.bi_sector;
+			if (blk_req(cmd) && blk_req(cmd)->bio)
+				lba = blk_req(cmd)->bio->bi_iter.bi_sector;
 			transfer_len = be32_to_cpu(
 				lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
 			if (opcode == WRITE_10)
 				group_id = lrbp->cmd->cmnd[6];
 		} else if (opcode == UNMAP) {
-			if (cmd->request) {
+			if (blk_req(cmd)) {
 				lba = scsi_get_lba(cmd);
-				transfer_len = blk_rq_bytes(cmd->request);
+				transfer_len = blk_rq_bytes(blk_req(cmd));
 			}
 		}
 	}
@@ -2617,11 +2617,11 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 
 	hba = shost_priv(host);
 
-	tag = cmd->request->tag;
+	tag = blk_req(cmd)->tag;
 	if (!ufshcd_valid_tag(hba, tag)) {
 		dev_err(hba->dev,
-			"%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p",
-			__func__, tag, cmd, cmd->request);
+			"%s: invalid command tag %d: cmd=0x%p, blk_req=0x%p",
+			__func__, tag, cmd, blk_req(cmd));
 		BUG();
 	}
 
@@ -2656,7 +2656,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
 	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
 
-	ufshcd_prepare_lrbp_crypto(cmd->request, lrbp);
+	ufshcd_prepare_lrbp_crypto(blk_req(cmd), lrbp);
 
 	lrbp->req_abort_skip = false;
 
@@ -6903,12 +6903,12 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 
 	host = cmd->device->host;
 	hba = shost_priv(host);
-	tag = cmd->request->tag;
+	tag = blk_req(cmd)->tag;
 	lrbp = &hba->lrb[tag];
 	if (!ufshcd_valid_tag(hba, tag)) {
 		dev_err(hba->dev,
-			"%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p",
-			__func__, tag, cmd, cmd->request);
+			"%s: invalid command tag %d: cmd=0x%p, blk_req=0x%p",
+			__func__, tag, cmd, blk_req(cmd));
 		BUG();
 	}
 

[PATCH 46/50] virtio_scsi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/virtio_scsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index b9c86a7e3b97..a7cd82d5620f 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -521,7 +521,7 @@ static void virtio_scsi_init_hdr_pi(struct virtio_device *vdev,
 				    struct virtio_scsi_cmd_req_pi *cmd_pi,
 				    struct scsi_cmnd *sc)
 {
-	struct request *rq = sc->request;
+	struct request *rq = blk_req(sc);
 	struct blk_integrity *bi;
 
 	virtio_scsi_init_hdr(vdev, (struct virtio_scsi_cmd_req *)cmd_pi, sc);
@@ -545,7 +545,7 @@ static void virtio_scsi_init_hdr_pi(struct virtio_device *vdev,
 static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi,
 						  struct scsi_cmnd *sc)
 {
-	u32 tag = blk_mq_unique_tag(sc->request);
+	u32 tag = blk_mq_unique_tag(blk_req(sc));
 	u16 hwq = blk_mq_unique_tag_to_hwq(tag);
 
 	return &vscsi->req_vqs[hwq];

[PATCH 47/50] xen-scsifront: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/xen-scsifront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/xen-scsifront.c b/drivers/scsi/xen-scsifront.c
index 259fc248d06c..785b39cbe0f7 100644
--- a/drivers/scsi/xen-scsifront.c
+++ b/drivers/scsi/xen-scsifront.c
@@ -212,7 +212,7 @@ static int scsifront_do_request(struct vscsifrnt_info *info,
 	memcpy(ring_req->cmnd, sc->cmnd, sc->cmd_len);
 
 	ring_req->sc_data_direction   = (uint8_t)sc->sc_data_direction;
-	ring_req->timeout_per_command = sc->request->timeout / HZ;
+	ring_req->timeout_per_command = blk_req(sc)->timeout / HZ;
 
 	for (i = 0; i < (shadow->nr_segments & ~VSCSIIF_SG_GRANT); i++)
 		ring_req->seg[i] = shadow->seg[i];

[PATCH 48/50] tcm_loop: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/target/loopback/tcm_loop.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 2687fd7d45db..19c4f21d4d10 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -183,7 +183,7 @@ static int tcm_loop_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc)
 
 	memset(tl_cmd, 0, sizeof(*tl_cmd));
 	tl_cmd->sc = sc;
-	tl_cmd->sc_cmd_tag = sc->request->tag;
+	tl_cmd->sc_cmd_tag = blk_req(sc)->tag;
 
 	tcm_loop_target_queue_cmd(tl_cmd);
 	return 0;
@@ -249,7 +249,7 @@ static int tcm_loop_abort_task(struct scsi_cmnd *sc)
 	tl_hba = *(struct tcm_loop_hba **)shost_priv(sc->device->host);
 	tl_tpg = &tl_hba->tl_hba_tpgs[sc->device->id];
 	ret = tcm_loop_issue_tmr(tl_tpg, sc->device->lun,
-				 sc->request->tag, TMR_ABORT_TASK);
+				 blk_req(sc)->tag, TMR_ABORT_TASK);
 	return (ret == TMR_FUNCTION_COMPLETE) ? SUCCESS : FAILED;
 }
 

[PATCH 49/50] usb-storage: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/usb/storage/transport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index f4304ce69350..53cc76b51ed7 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -551,7 +551,7 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
 	/* Did this command access the last sector? */
 	sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) |
 			(srb->cmnd[4] << 8) | (srb->cmnd[5]);
-	disk = srb->request->rq_disk;
+	disk = blk_req(srb)->rq_disk;
 	if (!disk)
 		goto done;
 	sdkp = scsi_disk(disk);

[PATCH 50/50] core: Remove the request member from struct scsi_cmnd

[Bart Van Assche]

Since all scsi_cmnd.request users are gone, remove this pointer from
the scsi_cmnd structure.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_error.c | 1 -
 drivers/scsi/scsi_lib.c   | 1 -
 include/scsi/scsi_cmnd.h  | 3 ---
 3 files changed, 5 deletions(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 8846e5066f92..1dac2725fd96 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -2390,7 +2390,6 @@ scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
 
 	scmd = (struct scsi_cmnd *)(rq + 1);
 	scsi_init_command(dev, scmd);
-	scmd->request = rq;
 	scmd->cmnd = scsi_req(rq)->cmd;
 
 	scmd->scsi_done		= scsi_reset_provider_done_command;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e88ce8f747ee..f03a42f239d8 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1534,7 +1534,6 @@ static blk_status_t scsi_prepare_cmd(struct request *req)
 
 	scsi_init_command(sdev, cmd);
 
-	cmd->request = req;
 	cmd->tag = req->tag;
 	cmd->prot_op = SCSI_PROT_NORMAL;
 	if (blk_rq_bytes(req))
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index a68521e6ce57..265fe4599b3e 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -111,9 +111,6 @@ struct scsi_cmnd {
 				   reconnects.   Probably == sector
 				   size */
 
-	struct request *request;	/* The command we are
-				   	   working on */
-
 	unsigned char *sense_buffer;
 				/* obtained by REQUEST SENSE when
 				 * CHECK CONDITION is received on original

[PATCH 00/50] Remove the request pointer from struct scsi_cmnd

[Bart Van Assche]

Hi Martin,

This patch series implements the following two changes for all SCSI drivers:
- Use blk_mq_rq_from_pdu() instead of the request member of struct scsi_cmnd
  since adding an offset to a pointer is faster than pointer indirection.
- Remove the request pointer from struct scsi_cmnd.

Please consider this patch series for kernel v5.14.

Thanks,

Bart.

Bart Van Assche (50):
  core: Introduce the blk_req() function
  core: Use blk_req() instead of scsi_cmnd.request
  sd: Use blk_req() instead of scsi_cmnd.request
  sr: Use blk_req() instead of scsi_cmnd.request
  scsi_transport_fc: Use blk_req() instead of scsi_cmnd.request
  scsi_transport_spi: Use blk_req() instead of scsi_cmnd.request
  ata: Use blk_req() instead of scsi_cmnd.request
  rdma/iser: Use blk_req() instead of scsi_cmnd.request
  rdma/srp: Use blk_req() instead of scsi_cmnd.request
  zfcp: Use blk_req() instead of scsi_cmnd.request
  53c700: Use blk_req() instead of scsi_cmnd.request
  NCR5380: Use blk_req() instead of scsi_cmnd.request
  aacraid: Use blk_req() instead of scsi_cmnd.request
  advansys: Use blk_req() instead of scsi_cmnd.request
  bnx2i: Use blk_req() instead of scsi_cmnd.request
  csiostor: Use blk_req() instead of scsi_cmnd.request
  cxlflash: Use blk_req() instead of scsi_cmnd.request
  dpt_i2o: Use blk_req() instead of scsi_cmnd.request
  fnic: Use blk_req() instead of scsi_cmnd.request
  hisi_sas: Use blk_req() instead of scsi_cmnd.request
  hpsa: Use blk_req() instead of scsi_cmnd.request
  ibmvfc: Use blk_req() instead of scsi_cmnd.request
  ibmvscsi: Use blk_req() instead of scsi_cmnd.request
  ips: Use blk_req() instead of scsi_cmnd.request
  libsas: Use blk_req() instead of scsi_cmnd.request
  lpfc: Use blk_req() instead of scsi_cmnd.request
  megaraid: Use blk_req() instead of scsi_cmnd.request
  mpt3sas: Use blk_req() instead of scsi_cmnd.request
  mvumi: Use blk_req() instead of scsi_cmnd.request
  myrb: Use blk_req() instead of scsi_cmnd.request
  myrs: Use blk_req() instead of scsi_cmnd.request
  ncr53c8xx: Use blk_req() instead of scsi_cmnd.request
  qedf: Use blk_req() instead of scsi_cmnd.request
  qedi: Use blk_req() instead of scsi_cmnd.request
  qla1280: Use blk_req() instead of scsi_cmnd.request
  qla2xxx: Use blk_req() instead of scsi_cmnd.request
  qla4xxx: Use blk_req() instead of scsi_cmnd.request
  qlogicpti: Use blk_req() instead of scsi_cmnd.request
  scsi_debug: Use blk_req() instead of scsi_cmnd.request
  smartpqi: Use blk_req() instead of scsi_cmnd.request
  snic: Use blk_req() instead of scsi_cmnd.request
  stex: Use blk_req() instead of scsi_cmnd.request
  sun3_scsi: Use blk_req() instead of scsi_cmnd.request
  sym53c8xx: Use blk_req() instead of scsi_cmnd.request
  ufs: Use blk_req() instead of scsi_cmnd.request
  virtio_scsi: Use blk_req() instead of scsi_cmnd.request
  xen-scsifront: Use blk_req() instead of scsi_cmnd.request
  tcm_loop: Use blk_req() instead of scsi_cmnd.request
  usb-storage: Use blk_req() instead of scsi_cmnd.request
  core: Remove the request member from struct scsi_cmnd

 drivers/ata/libata-eh.c                     |  5 +-
 drivers/ata/libata-scsi.c                   | 10 ++--
 drivers/infiniband/ulp/iser/iser_memory.c   |  2 +-
 drivers/infiniband/ulp/srp/ib_srp.c         |  6 +-
 drivers/s390/scsi/zfcp_fsf.c                |  2 +-
 drivers/scsi/53c700.c                       |  2 +-
 drivers/scsi/NCR5380.c                      |  6 +-
 drivers/scsi/aacraid/aachba.c               |  2 +-
 drivers/scsi/aacraid/commsup.c              |  2 +-
 drivers/scsi/advansys.c                     |  4 +-
 drivers/scsi/bnx2i/bnx2i_hwi.c              |  2 +-
 drivers/scsi/csiostor/csio_scsi.c           |  6 +-
 drivers/scsi/cxlflash/main.c                |  2 +-
 drivers/scsi/dpt_i2o.c                      |  4 +-
 drivers/scsi/fnic/fnic_scsi.c               | 40 ++++++-------
 drivers/scsi/hisi_sas/hisi_sas_main.c       |  4 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c      |  2 +-
 drivers/scsi/hpsa.c                         |  6 +-
 drivers/scsi/ibmvscsi/ibmvfc.c              |  2 +-
 drivers/scsi/ibmvscsi/ibmvscsi.c            |  2 +-
 drivers/scsi/ips.c                          |  2 +-
 drivers/scsi/libsas/sas_ata.c               |  2 +-
 drivers/scsi/libsas/sas_scsi_host.c         |  2 +-
 drivers/scsi/lpfc/lpfc_scsi.c               | 63 ++++++++++-----------
 drivers/scsi/megaraid/megaraid_sas_base.c   |  4 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 10 ++--
 drivers/scsi/mpt3sas/mpt3sas_base.c         |  4 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c        |  6 +-
 drivers/scsi/mvumi.c                        |  2 +-
 drivers/scsi/myrb.c                         | 10 ++--
 drivers/scsi/myrs.c                         | 10 ++--
 drivers/scsi/ncr53c8xx.c                    |  4 +-
 drivers/scsi/qedf/qedf_io.c                 |  8 +--
 drivers/scsi/qedi/qedi_fw.c                 |  9 +--
 drivers/scsi/qla1280.c                      |  6 +-
 drivers/scsi/qla2xxx/qla_os.c               |  4 +-
 drivers/scsi/qla4xxx/ql4_iocb.c             |  2 +-
 drivers/scsi/qla4xxx/ql4_os.c               |  4 +-
 drivers/scsi/qlogicpti.c                    |  2 +-
 drivers/scsi/scsi.c                         |  2 +-
 drivers/scsi/scsi_debug.c                   | 13 +++--
 drivers/scsi/scsi_error.c                   | 15 +++--
 drivers/scsi/scsi_lib.c                     | 27 +++++----
 drivers/scsi/scsi_logging.c                 | 18 +++---
 drivers/scsi/scsi_transport_fc.c            |  2 +-
 drivers/scsi/scsi_transport_spi.c           |  2 +-
 drivers/scsi/sd.c                           | 32 +++++------
 drivers/scsi/sd_zbc.c                       | 10 ++--
 drivers/scsi/smartpqi/smartpqi_init.c       |  4 +-
 drivers/scsi/snic/snic_scsi.c               | 10 ++--
 drivers/scsi/sr.c                           | 10 ++--
 drivers/scsi/stex.c                         |  6 +-
 drivers/scsi/sun3_scsi.c                    |  2 +-
 drivers/scsi/sym53c8xx_2/sym_glue.c         |  4 +-
 drivers/scsi/ufs/ufshcd.c                   | 22 +++----
 drivers/scsi/virtio_scsi.c                  |  4 +-
 drivers/scsi/xen-scsifront.c                |  2 +-
 drivers/target/loopback/tcm_loop.c          |  4 +-
 drivers/usb/storage/transport.c             |  2 +-
 include/scsi/scsi_cmnd.h                    | 13 +++--
 include/scsi/scsi_device.h                  | 16 +++---
 61 files changed, 239 insertions(+), 246 deletions(-)

[PATCH 01/50] core: Introduce the blk_req() function

[Bart Van Assche]

The 'request' member of struct scsi_cmnd is superfluous. The struct
request and struct scsi_cmnd data structures are adjacent and hence the
request pointer can be derived easily from a scsi_cmnd pointer. Introduce
a helper function that performs that conversion in a type-safe way. This
patch is the first step towards removing the request member from struct
scsi_cmnd. Making that change has the following advantages:
- This is a performance optimization since adding an offset to a pointer
  takes less time than dereferencing a pointer.
- struct scsi_cmnd becomes smaller.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 include/scsi/scsi_cmnd.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index fed024f4c02a..f5825be7ee76 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -146,6 +146,12 @@ struct scsi_cmnd {
 	unsigned int extra_len;	/* length of alignment and padding */
 };
 
+/* Variant of blk_mq_rq_from_pdu() that verifies the type of its argument. */
+static inline struct request *blk_req(struct scsi_cmnd *scmd)
+{
+	return blk_mq_rq_from_pdu(scmd);
+}
+
 /*
  * Return the driver private allocation behind the command.
  * Only works if cmd_size is set in the host template.

[PATCH 02/50] core: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi.c         |  2 +-
 drivers/scsi/scsi_error.c   | 14 +++++++-------
 drivers/scsi/scsi_lib.c     | 26 +++++++++++++-------------
 drivers/scsi/scsi_logging.c | 18 ++++++++++--------
 include/scsi/scsi_cmnd.h    |  4 ++--
 include/scsi/scsi_device.h  | 16 +++++++++-------
 6 files changed, 42 insertions(+), 38 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index e9e2f0e15ac8..a226f2d380a3 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -197,7 +197,7 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
 				"(result %x)\n", cmd->result));
 
 	good_bytes = scsi_bufflen(cmd);
-	if (!blk_rq_is_passthrough(cmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(cmd))) {
 		int old_good_bytes = good_bytes;
 		drv = scsi_cmd_to_driver(cmd);
 		if (drv->done)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index d8fafe77dbbe..8846e5066f92 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -242,7 +242,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
  */
 static void scsi_eh_reset(struct scsi_cmnd *scmd)
 {
-	if (!blk_rq_is_passthrough(scmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(scmd))) {
 		struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
 		if (sdrv->eh_reset)
 			sdrv->eh_reset(scmd);
@@ -1188,7 +1188,7 @@ static enum scsi_disposition scsi_request_sense(struct scsi_cmnd *scmd)
 static enum scsi_disposition
 scsi_eh_action(struct scsi_cmnd *scmd, enum scsi_disposition rtn)
 {
-	if (!blk_rq_is_passthrough(scmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(scmd))) {
 		struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
 		if (sdrv->eh_action)
 			rtn = sdrv->eh_action(scmd, rtn);
@@ -1762,16 +1762,16 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 	case DID_TIME_OUT:
 		goto check_type;
 	case DID_BUS_BUSY:
-		return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
+		return blk_req(scmd)->cmd_flags & REQ_FAILFAST_TRANSPORT;
 	case DID_PARITY:
-		return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
+		return blk_req(scmd)->cmd_flags & REQ_FAILFAST_DEV;
 	case DID_ERROR:
 		if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
 		    status_byte(scmd->result) == RESERVATION_CONFLICT)
 			return 0;
 		fallthrough;
 	case DID_SOFT_ERROR:
-		return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
+		return blk_req(scmd)->cmd_flags & REQ_FAILFAST_DRIVER;
 	}
 
 	if (status_byte(scmd->result) != CHECK_CONDITION)
@@ -1782,8 +1782,8 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 	 * assume caller has checked sense and determined
 	 * the check condition was retryable.
 	 */
-	if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
-	    blk_rq_is_passthrough(scmd->request))
+	if (blk_req(scmd)->cmd_flags & REQ_FAILFAST_DEV ||
+	    blk_rq_is_passthrough(blk_req(scmd)))
 		return 1;
 
 	return 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 532304d42f00..e88ce8f747ee 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -119,13 +119,13 @@ scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
 
 static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
 {
-	if (cmd->request->rq_flags & RQF_DONTPREP) {
-		cmd->request->rq_flags &= ~RQF_DONTPREP;
+	if (blk_req(cmd)->rq_flags & RQF_DONTPREP) {
+		blk_req(cmd)->rq_flags &= ~RQF_DONTPREP;
 		scsi_mq_uninit_cmd(cmd);
 	} else {
 		WARN_ON_ONCE(true);
 	}
-	blk_mq_requeue_request(cmd->request, true);
+	blk_mq_requeue_request(blk_req(cmd), true);
 }
 
 /**
@@ -164,7 +164,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
 	 */
 	cmd->result = 0;
 
-	blk_mq_requeue_request(cmd->request, true);
+	blk_mq_requeue_request(blk_req(cmd), true);
 }
 
 /**
@@ -475,7 +475,7 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
 
 static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
 {
-	if (!blk_rq_is_passthrough(cmd->request)) {
+	if (!blk_rq_is_passthrough(blk_req(cmd))) {
 		struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
 
 		if (drv->uninit_command)
@@ -626,7 +626,7 @@ static void scsi_io_completion_reprep(struct scsi_cmnd *cmd,
 
 static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd)
 {
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	unsigned long wait_for;
 
 	if (cmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT)
@@ -645,7 +645,7 @@ static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd)
 static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
 {
 	struct request_queue *q = cmd->device->request_queue;
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	int level = 0;
 	enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
 	      ACTION_DELAYED_RETRY} action;
@@ -819,7 +819,7 @@ static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
 {
 	bool sense_valid;
 	bool sense_current = true;	/* false implies "deferred sense" */
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	struct scsi_sense_hdr sshdr;
 
 	sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
@@ -908,7 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
 	int result = cmd->result;
 	struct request_queue *q = cmd->device->request_queue;
-	struct request *req = cmd->request;
+	struct request *req = blk_req(cmd);
 	blk_status_t blk_stat = BLK_STS_OK;
 
 	if (unlikely(result))	/* a nz result may or may not be an error */
@@ -979,7 +979,7 @@ static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
 blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd)
 {
 	struct scsi_device *sdev = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	unsigned short nr_segs = blk_rq_nr_phys_segments(rq);
 	struct scatterlist *last_sg = NULL;
 	blk_status_t ret;
@@ -1108,7 +1108,7 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 {
 	void *buf = cmd->sense_buffer;
 	void *prot = cmd->prot_sdb;
-	struct request *rq = blk_mq_rq_from_pdu(cmd);
+	struct request *rq = blk_req(cmd);
 	unsigned int flags = cmd->flags & SCMD_PRESERVED_FLAGS;
 	unsigned long jiffies_at_alloc;
 	int retries, to_clear;
@@ -1573,12 +1573,12 @@ static blk_status_t scsi_prepare_cmd(struct request *req)
 
 static void scsi_mq_done(struct scsi_cmnd *cmd)
 {
-	if (unlikely(blk_should_fake_timeout(cmd->request->q)))
+	if (unlikely(blk_should_fake_timeout(blk_req(cmd)->q)))
 		return;
 	if (unlikely(test_and_set_bit(SCMD_STATE_COMPLETE, &cmd->state)))
 		return;
 	trace_scsi_dispatch_cmd_done(cmd);
-	blk_mq_complete_request(cmd->request);
+	blk_mq_complete_request(blk_req(cmd));
 }
 
 static void scsi_mq_put_budget(struct request_queue *q, int budget_token)
diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index 8ea44c6595ef..706986e7f5ef 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -28,8 +28,9 @@ static void scsi_log_release_buffer(char *bufptr)
 
 static inline const char *scmd_name(const struct scsi_cmnd *scmd)
 {
-	return scmd->request->rq_disk ?
-		scmd->request->rq_disk->disk_name : NULL;
+	struct request *rq = blk_req((struct scsi_cmnd *)scmd);
+
+	return rq->rq_disk ? rq->rq_disk->disk_name : NULL;
 }
 
 static size_t sdev_format_header(char *logbuf, size_t logbuf_len,
@@ -91,7 +92,7 @@ void scmd_printk(const char *level, const struct scsi_cmnd *scmd,
 	if (!logbuf)
 		return;
 	off = sdev_format_header(logbuf, logbuf_len, scmd_name(scmd),
-				 scmd->request->tag);
+				 blk_req((struct scsi_cmnd *)scmd)->tag);
 	if (off < logbuf_len) {
 		va_start(args, fmt);
 		off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args);
@@ -188,7 +189,7 @@ void scsi_print_command(struct scsi_cmnd *cmd)
 		return;
 
 	off = sdev_format_header(logbuf, logbuf_len,
-				 scmd_name(cmd), cmd->request->tag);
+				 scmd_name(cmd), blk_req(cmd)->tag);
 	if (off >= logbuf_len)
 		goto out_printk;
 	off += scnprintf(logbuf + off, logbuf_len - off, "CDB: ");
@@ -210,7 +211,7 @@ void scsi_print_command(struct scsi_cmnd *cmd)
 
 			off = sdev_format_header(logbuf, logbuf_len,
 						 scmd_name(cmd),
-						 cmd->request->tag);
+						 blk_req(cmd)->tag);
 			if (!WARN_ON(off > logbuf_len - 58)) {
 				off += scnprintf(logbuf + off, logbuf_len - off,
 						 "CDB[%02x]: ", k);
@@ -373,7 +374,8 @@ EXPORT_SYMBOL(__scsi_print_sense);
 /* Normalize and print sense buffer in SCSI command */
 void scsi_print_sense(const struct scsi_cmnd *cmd)
 {
-	scsi_log_print_sense(cmd->device, scmd_name(cmd), cmd->request->tag,
+	scsi_log_print_sense(cmd->device, scmd_name(cmd),
+			     blk_req((struct scsi_cmnd *)cmd)->tag,
 			     cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
 }
 EXPORT_SYMBOL(scsi_print_sense);
@@ -392,8 +394,8 @@ void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg,
 	if (!logbuf)
 		return;
 
-	off = sdev_format_header(logbuf, logbuf_len,
-				 scmd_name(cmd), cmd->request->tag);
+	off = sdev_format_header(logbuf, logbuf_len, scmd_name(cmd),
+				 blk_req((struct scsi_cmnd *)cmd)->tag);
 
 	if (off >= logbuf_len)
 		goto out_printk;
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index f5825be7ee76..a68521e6ce57 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -164,7 +164,7 @@ static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd)
 /* make sure not to use it with passthrough commands */
 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
 {
-	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+	return *(struct scsi_driver **)blk_req(cmd)->rq_disk->private_data;
 }
 
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
@@ -290,7 +290,7 @@ static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
 
 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
 {
-	return blk_rq_pos(scmd->request);
+	return blk_rq_pos(blk_req(scmd));
 }
 
 static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd)
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index ac6ab16abee7..2614e4a6a01e 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -265,13 +265,15 @@ sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
 __printf(3, 4) void
 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
 
-#define scmd_dbg(scmd, fmt, a...)					   \
-	do {								   \
-		if ((scmd)->request->rq_disk)				   \
-			sdev_dbg((scmd)->device, "[%s] " fmt,		   \
-				 (scmd)->request->rq_disk->disk_name, ##a);\
-		else							   \
-			sdev_dbg((scmd)->device, fmt, ##a);		   \
+#define scmd_dbg(scmd, fmt, a...)				\
+	do {							\
+		struct request *rq = blk_req((scmd));		\
+								\
+		if (rq->rq_disk)				\
+			sdev_dbg((scmd)->device, "[%s] " fmt,	\
+				 rq->rq_disk->disk_name, ##a);	\
+		else						\
+			sdev_dbg((scmd)->device, fmt, ##a);	\
 	} while (0)
 
 enum scsi_target_state {

[PATCH 03/50] sd: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sd.c     | 32 ++++++++++++++++----------------
 drivers/scsi/sd_zbc.c | 10 +++++-----
 2 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index cb3c37d1e009..0886b4dbef32 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -779,8 +779,8 @@ static unsigned int sd_prot_flag_mask(unsigned int prot_op)
 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
 					   unsigned int dix, unsigned int dif)
 {
-	struct bio *bio = scmd->request->bio;
-	unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
+	struct bio *bio = blk_req(scmd)->bio;
+	unsigned int prot_op = sd_prot_op(rq_data_dir(blk_req(scmd)), dix, dif);
 	unsigned int protect = 0;
 
 	if (dix) {				/* DIX Type 0, 1, 2, 3 */
@@ -871,7 +871,7 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
 {
 	struct scsi_device *sdp = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
@@ -907,7 +907,7 @@ static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
 		bool unmap)
 {
 	struct scsi_device *sdp = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
@@ -939,7 +939,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
 		bool unmap)
 {
 	struct scsi_device *sdp = cmd->device;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
@@ -969,7 +969,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
 
 static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_device *sdp = cmd->device;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
@@ -1066,7 +1066,7 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
  **/
 static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_device *sdp = cmd->device;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	struct bio *bio = rq->bio;
@@ -1115,7 +1115,7 @@ static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 
 static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 
 	/* flush requests don't perform I/O, zero the S/G table */
@@ -1213,7 +1213,7 @@ static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write,
 
 static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_device *sdp = cmd->device;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq));
@@ -1327,7 +1327,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 
 static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 
 	switch (req_op(rq)) {
 	case REQ_OP_DISCARD:
@@ -1373,7 +1373,7 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 
 static void sd_uninit_command(struct scsi_cmnd *SCpnt)
 {
-	struct request *rq = SCpnt->request;
+	struct request *rq = blk_req(SCpnt);
 	u8 *cmnd;
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
@@ -1906,7 +1906,7 @@ static const struct block_device_operations sd_fops = {
  **/
 static void sd_eh_reset(struct scsi_cmnd *scmd)
 {
-	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
+	struct scsi_disk *sdkp = scsi_disk(blk_req(scmd)->rq_disk);
 
 	/* New SCSI EH run, reset gate variable */
 	sdkp->ignore_medium_access_errors = false;
@@ -1926,7 +1926,7 @@ static void sd_eh_reset(struct scsi_cmnd *scmd)
  **/
 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
 {
-	struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
+	struct scsi_disk *sdkp = scsi_disk(blk_req(scmd)->rq_disk);
 	struct scsi_device *sdev = scmd->device;
 
 	if (!scsi_device_online(sdev) ||
@@ -1967,7 +1967,7 @@ static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
 
 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 {
-	struct request *req = scmd->request;
+	struct request *req = blk_req(scmd);
 	struct scsi_device *sdev = scmd->device;
 	unsigned int transferred, good_bytes;
 	u64 start_lba, end_lba, bad_lba;
@@ -2022,8 +2022,8 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	unsigned int sector_size = SCpnt->device->sector_size;
 	unsigned int resid;
 	struct scsi_sense_hdr sshdr;
-	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
-	struct request *req = SCpnt->request;
+	struct scsi_disk *sdkp = scsi_disk(blk_req(SCpnt)->rq_disk);
+	struct request *req = blk_req(SCpnt);
 	int sense_valid = 0;
 	int sense_deferred = 0;
 
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index e45d8d94574c..0fc26fbc5a3c 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -244,7 +244,7 @@ int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
 
 static blk_status_t sd_zbc_cmnd_checks(struct scsi_cmnd *cmd)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t sector = blk_rq_pos(rq);
 
@@ -322,7 +322,7 @@ static void sd_zbc_update_wp_offset_workfn(struct work_struct *work)
 blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
 					unsigned int nr_blocks)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	unsigned int wp_offset, zno = blk_rq_zone_no(rq);
 	unsigned long flags;
@@ -387,7 +387,7 @@ blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
 blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
 					 unsigned char op, bool all)
 {
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	sector_t sector = blk_rq_pos(rq);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t block = sectors_to_logical(sdkp->device, sector);
@@ -443,7 +443,7 @@ static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
 					  unsigned int good_bytes)
 {
 	int result = cmd->result;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	unsigned int zno = blk_rq_zone_no(rq);
 	enum req_opf op = req_op(rq);
@@ -517,7 +517,7 @@ unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		     struct scsi_sense_hdr *sshdr)
 {
 	int result = cmd->result;
-	struct request *rq = cmd->request;
+	struct request *rq = blk_req(cmd);
 
 	if (op_is_zone_mgmt(req_op(rq)) &&
 	    result &&

[PATCH 04/50] sr: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sr.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index e4633b84c556..5a23f4ca8698 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -326,7 +326,7 @@ static int sr_done(struct scsi_cmnd *SCpnt)
 	int good_bytes = (result == 0 ? this_count : 0);
 	int block_sectors = 0;
 	long error_sector;
-	struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
+	struct scsi_cd *cd = scsi_cd(blk_req(SCpnt)->rq_disk);
 
 #ifdef DEBUG
 	scmd_printk(KERN_INFO, SCpnt, "done: %x\n", result);
@@ -348,16 +348,16 @@ static int sr_done(struct scsi_cmnd *SCpnt)
 				break;
 			error_sector =
 				get_unaligned_be32(&SCpnt->sense_buffer[3]);
-			if (SCpnt->request->bio != NULL)
+			if (blk_req(SCpnt)->bio != NULL)
 				block_sectors =
-					bio_sectors(SCpnt->request->bio);
+					bio_sectors(blk_req(SCpnt)->bio);
 			if (block_sectors < 4)
 				block_sectors = 4;
 			if (cd->device->sector_size == 2048)
 				error_sector <<= 2;
 			error_sector &= ~(block_sectors - 1);
 			good_bytes = (error_sector -
-				      blk_rq_pos(SCpnt->request)) << 9;
+				      blk_rq_pos(blk_req(SCpnt))) << 9;
 			if (good_bytes < 0 || good_bytes >= this_count)
 				good_bytes = 0;
 			/*
@@ -389,7 +389,7 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
 {
 	int block = 0, this_count, s_size;
 	struct scsi_cd *cd;
-	struct request *rq = SCpnt->request;
+	struct request *rq = blk_req(SCpnt);
 	blk_status_t ret;
 
 	ret = scsi_alloc_sgtables(SCpnt);

[PATCH 05/50] scsi_transport_fc: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_transport_fc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index da5b503dc7a1..8134a5ea5921 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3804,7 +3804,7 @@ bool fc_eh_should_retry_cmd(struct scsi_cmnd *scmd)
 	struct fc_rport *rport = starget_to_rport(scsi_target(scmd->device));
 
 	if ((rport->port_state != FC_PORTSTATE_ONLINE) &&
-		(scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT)) {
+		(blk_req(scmd)->cmd_flags & REQ_FAILFAST_TRANSPORT)) {
 		set_host_byte(scmd, DID_TRANSPORT_MARGINAL);
 		return false;
 	}

[PATCH 06/50] scsi_transport_spi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_transport_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index c37dd15d16d2..e75c7c184a01 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -1230,7 +1230,7 @@ int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd)
 {
         if (cmd->flags & SCMD_TAGGED) {
 		*msg++ = SIMPLE_QUEUE_TAG;
-        	*msg++ = cmd->request->tag;
+        	*msg++ = blk_req(cmd)->tag;
         	return 2;
 	}
 

[PATCH 07/50] ata: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ata/libata-eh.c   |  5 ++---
 drivers/ata/libata-scsi.c | 10 +++++-----
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bb3637762985..4b007c9adfcb 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -912,7 +912,7 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
 	 * Note that ATA_QCFLAG_FAILED is unconditionally set after
 	 * this function completes.
 	 */
-	blk_abort_request(qc->scsicmd->request);
+	blk_abort_request(blk_req(qc->scsicmd));
 }
 
 /**
@@ -1893,8 +1893,7 @@ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
  */
 static inline bool ata_eh_quiet(struct ata_queued_cmd *qc)
 {
-	if (qc->scsicmd &&
-	    qc->scsicmd->request->rq_flags & RQF_QUIET)
+	if (qc->scsicmd && blk_req(qc->scsicmd)->rq_flags & RQF_QUIET)
 		qc->flags |= ATA_QCFLAG_QUIET;
 	return qc->flags & ATA_QCFLAG_QUIET;
 }
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index fd8b6febbf70..108c2f0b3e17 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -627,7 +627,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 {
 	struct ata_queued_cmd *qc;
 
-	qc = ata_qc_new_init(dev, cmd->request->tag);
+	qc = ata_qc_new_init(dev, blk_req(cmd)->tag);
 	if (qc) {
 		qc->scsicmd = cmd;
 		qc->scsidone = cmd->scsi_done;
@@ -635,7 +635,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 		qc->sg = scsi_sglist(cmd);
 		qc->n_elem = scsi_sg_count(cmd);
 
-		if (cmd->request->rq_flags & RQF_QUIET)
+		if (blk_req(cmd)->rq_flags & RQF_QUIET)
 			qc->flags |= ATA_QCFLAG_QUIET;
 	} else {
 		cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
@@ -1497,7 +1497,7 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
 
 static bool ata_check_nblocks(struct scsi_cmnd *scmd, u32 n_blocks)
 {
-	struct request *rq = scmd->request;
+	struct request *rq = blk_req(scmd);
 	u32 req_blocks;
 
 	if (!blk_rq_is_passthrough(rq))
@@ -1532,7 +1532,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *scmd = qc->scsicmd;
 	const u8 *cdb = scmd->cmnd;
-	struct request *rq = scmd->request;
+	struct request *rq = blk_req(scmd);
 	int class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
 	unsigned int tf_flags = 0;
 	u64 block;
@@ -3182,7 +3182,7 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 	 * as it modifies the DATA OUT buffer, which would corrupt user
 	 * memory for SG_IO commands.
 	 */
-	if (unlikely(blk_rq_is_passthrough(scmd->request)))
+	if (unlikely(blk_rq_is_passthrough(blk_req(scmd))))
 		goto invalid_opcode;
 
 	if (unlikely(scmd->cmd_len < 16)) {

[PATCH 08/50] rdma/iser: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/infiniband/ulp/iser/iser_memory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c
index afec40da9b58..37c5cffaeaa1 100644
--- a/drivers/infiniband/ulp/iser/iser_memory.c
+++ b/drivers/infiniband/ulp/iser/iser_memory.c
@@ -159,7 +159,7 @@ iser_set_dif_domain(struct scsi_cmnd *sc, struct ib_sig_domain *domain)
 {
 	domain->sig_type = IB_SIG_TYPE_T10_DIF;
 	domain->sig.dif.pi_interval = scsi_prot_interval(sc);
-	domain->sig.dif.ref_tag = t10_pi_ref_tag(sc->request);
+	domain->sig.dif.ref_tag = t10_pi_ref_tag(blk_req(sc));
 	/*
 	 * At the moment we hard code those, but in the future
 	 * we will take them from sc.

[PATCH 09/50] rdma/srp: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/infiniband/ulp/srp/ib_srp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 31f8aa2c40ed..0575f5f3ae53 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2182,8 +2182,8 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 	if (unlikely(scmnd->result))
 		goto err;
 
-	WARN_ON_ONCE(scmnd->request->tag < 0);
-	tag = blk_mq_unique_tag(scmnd->request);
+	WARN_ON_ONCE(blk_req(scmnd)->tag < 0);
+	tag = blk_mq_unique_tag(blk_req(scmnd));
 	ch = &target->ch[blk_mq_unique_tag_to_hwq(tag)];
 	idx = blk_mq_unique_tag_to_tag(tag);
 	WARN_ONCE(idx >= target->req_ring_size, "%s: tag %#x: idx %d >= %d\n",
@@ -2814,7 +2814,7 @@ static int srp_abort(struct scsi_cmnd *scmnd)
 
 	if (!req)
 		return SUCCESS;
-	tag = blk_mq_unique_tag(scmnd->request);
+	tag = blk_mq_unique_tag(blk_req(scmnd));
 	ch_idx = blk_mq_unique_tag_to_hwq(tag);
 	if (WARN_ON_ONCE(ch_idx >= target->ch_count))
 		return SUCCESS;

[PATCH 10/50] zfcp: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/s390/scsi/zfcp_fsf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 2e4804ef2fb9..ac9223a7677d 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2377,7 +2377,7 @@ static void zfcp_fsf_req_trace(struct zfcp_fsf_req *req, struct scsi_cmnd *scsi)
 		}
 	}
 
-	blk_add_driver_data(scsi->request, &blktrc, sizeof(blktrc));
+	blk_add_driver_data(blk_req(scsi), &blktrc, sizeof(blktrc));
 }
 
 /**

[PATCH 11/50] 53c700: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/53c700.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 77ccb96e5ed4..8dd686484857 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1823,7 +1823,7 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)
 
 	if ((hostdata->tag_negotiated & (1<<scmd_id(SCp))) &&
 	    SCp->device->simple_tags) {
-		slot->tag = SCp->request->tag;
+		slot->tag = blk_req(SCp)->tag;
 		CDEBUG(KERN_DEBUG, SCp, "sending out tag %d, slot %p\n",
 		       slot->tag, slot);
 	} else {

[PATCH 12/50] NCR5380: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/NCR5380.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 2ddbcaa667d1..cfeadbd98669 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -778,7 +778,7 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
 	}
 
 #ifdef CONFIG_SUN3
-	if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
+	if ((sun3scsi_dma_finish(rq_data_dir(blk_req(hostdata->connected))))) {
 		pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
 		       instance->host_no);
 		BUG();
@@ -1710,7 +1710,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				count = sun3scsi_dma_xfer_len(hostdata, cmd);
 
 				if (count > 0) {
-					if (rq_data_dir(cmd->request))
+					if (rq_data_dir(blk_req(cmd)))
 						sun3scsi_dma_send_setup(hostdata,
 						                        cmd->SCp.ptr, count);
 					else
@@ -2158,7 +2158,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		count = sun3scsi_dma_xfer_len(hostdata, tmp);
 
 		if (count > 0) {
-			if (rq_data_dir(tmp->request))
+			if (rq_data_dir(blk_req(tmp)))
 				sun3scsi_dma_send_setup(hostdata,
 				                        tmp->SCp.ptr, count);
 			else

[PATCH 13/50] aacraid: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/aacraid/aachba.c  | 2 +-
 drivers/scsi/aacraid/commsup.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 46b8dffce2dd..73570f8e89e0 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1505,7 +1505,7 @@ static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd
 	srbcmd->id       = cpu_to_le32(scmd_id(cmd));
 	srbcmd->lun      = cpu_to_le32(cmd->device->lun);
 	srbcmd->flags    = cpu_to_le32(flag);
-	timeout = cmd->request->timeout/HZ;
+	timeout = blk_req(cmd)->timeout / HZ;
 	if (timeout == 0)
 		timeout = (dev->sa_firmware ? AAC_SA_TIMEOUT : AAC_ARC_TIMEOUT);
 	srbcmd->timeout  = cpu_to_le32(timeout);  // timeout in seconds
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 54eb4d41bc2c..4745c0622e53 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -224,7 +224,7 @@ struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
 {
 	struct fib *fibptr;
 
-	fibptr = &dev->fibs[scmd->request->tag];
+	fibptr = &dev->fibs[blk_req(scmd)->tag];
 	/*
 	 *	Null out fields that depend on being zero at the start of
 	 *	each I/O

[PATCH 14/50] advansys: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/advansys.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 800052f10699..e9ec10c466f3 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7427,7 +7427,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
 	 * Set the srb_tag to the command tag + 1, as
 	 * srb_tag '0' is used internally by the chip.
 	 */
-	srb_tag = scp->request->tag + 1;
+	srb_tag = blk_req(scp)->tag + 1;
 	asc_scsi_q->q2.srb_tag = srb_tag;
 
 	/*
@@ -7641,7 +7641,7 @@ static int
 adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
 	      adv_req_t **adv_reqpp)
 {
-	u32 srb_tag = scp->request->tag;
+	u32 srb_tag = blk_req(scp)->tag;
 	adv_req_t *reqp;
 	ADV_SCSI_REQ_Q *scsiqp;
 	int ret;

[PATCH 15/50] bnx2i: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 43e8a1dafec0..70e9a8e6329d 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1918,7 +1918,7 @@ static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session,
 
 	spin_unlock(&session->back_lock);
 
-	p = &per_cpu(bnx2i_percpu, blk_mq_rq_cpu(sc->request));
+	p = &per_cpu(bnx2i_percpu, blk_mq_rq_cpu(blk_req(sc)));
 	spin_lock(&p->p_work_lock);
 	if (unlikely(!p->iothread)) {
 		rc = -EINVAL;

[PATCH 16/50] csiostor: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/csiostor/csio_scsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index 56b9ad0a1ca0..234e0baec091 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -1786,7 +1786,7 @@ csio_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmnd)
 	struct csio_scsi_qset *sqset;
 	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
 
-	sqset = &hw->sqset[ln->portid][blk_mq_rq_cpu(cmnd->request)];
+	sqset = &hw->sqset[ln->portid][blk_mq_rq_cpu(blk_req(cmnd))];
 
 	nr = fc_remote_port_chkready(rport);
 	if (nr) {
@@ -1989,13 +1989,13 @@ csio_eh_abort_handler(struct scsi_cmnd *cmnd)
 		csio_info(hw,
 			"Aborted SCSI command to (%d:%llu) tag %u\n",
 			cmnd->device->id, cmnd->device->lun,
-			cmnd->request->tag);
+			blk_req(cmnd)->tag);
 		return SUCCESS;
 	} else {
 		csio_info(hw,
 			"Failed to abort SCSI command, (%d:%llu) tag %u\n",
 			cmnd->device->id, cmnd->device->lun,
-			cmnd->request->tag);
+			blk_req(cmnd)->tag);
 		return FAILED;
 	}
 }

[PATCH 17/50] cxlflash: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/cxlflash/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 222593bc2afe..c3f5df2f3509 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -433,7 +433,7 @@ static u32 cmd_to_target_hwq(struct Scsi_Host *host, struct scsi_cmnd *scp,
 		hwq = afu->hwq_rr_count++ % afu->num_hwqs;
 		break;
 	case HWQ_MODE_TAG:
-		tag = blk_mq_unique_tag(scp->request);
+		tag = blk_mq_unique_tag(blk_req(scp));
 		hwq = blk_mq_unique_tag_to_hwq(tag);
 		break;
 	case HWQ_MODE_CPU:

[PATCH 18/50] dpt_i2o: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/dpt_i2o.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index a18a4a08f049..75fbbd939b4a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -652,7 +652,7 @@ static int adpt_abort(struct scsi_cmnd * cmd)
 	msg[2] = 0;
 	msg[3]= 0;
 	/* Add 1 to avoid firmware treating it as invalid command */
-	msg[4] = cmd->request->tag + 1;
+	msg[4] = blk_req(cmd)->tag + 1;
 	if (pHba->host)
 		spin_lock_irq(pHba->host->host_lock);
 	rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER);
@@ -2236,7 +2236,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
 	msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid);
 	msg[2] = 0;
 	/* Add 1 to avoid firmware treating it as invalid command */
-	msg[3] = cmd->request->tag + 1;
+	msg[3] = blk_req(cmd)->tag + 1;
 	// Our cards use the transaction context as the tag for queueing
 	// Adaptec/DPT Private stuff 
 	msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16);

[PATCH 19/50] fnic: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/fnic/fnic_scsi.c | 40 ++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 762cc8bd2653..5a0dcea64ad3 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -107,7 +107,7 @@ static void fnic_cleanup_io(struct fnic *fnic);
 static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
 					    struct scsi_cmnd *sc)
 {
-	u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
+	u32 hash = blk_req(sc)->tag & (FNIC_IO_LOCKS - 1);
 
 	return &fnic->io_req_lock[hash];
 }
@@ -390,7 +390,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 	    (rp->flags & FC_RP_FLAGS_RETRY))
 		exch_flags |= FCPIO_ICMND_SRFLAG_RETRY;
 
-	fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag,
+	fnic_queue_wq_copy_desc_icmnd_16(wq, blk_req(sc)->tag,
 					 0, exch_flags, io_req->sgl_cnt,
 					 SCSI_SENSE_BUFFERSIZE,
 					 io_req->sgl_list_pa,
@@ -511,7 +511,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 	sg_count = scsi_dma_map(sc);
 	if (sg_count < 0) {
 		FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
-			  sc->request->tag, sc, 0, sc->cmnd[0],
+			  blk_req(sc)->tag, sc, 0, sc->cmnd[0],
 			  sg_count, CMD_STATE(sc));
 		mempool_free(io_req, fnic->io_req_pool);
 		goto out;
@@ -571,7 +571,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 		 * refetch the pointer under the lock.
 		 */
 		FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
-			  sc->request->tag, sc, 0, 0, 0,
+			  blk_req(sc)->tag, sc, 0, 0, 0,
 			  (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
 		io_req = (struct fnic_io_req *)CMD_SP(sc);
 		CMD_SP(sc) = NULL;
@@ -603,7 +603,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 			sc->cmnd[5]);
 
 	FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
-		  sc->request->tag, sc, io_req,
+		  blk_req(sc)->tag, sc, io_req,
 		  sg_count, cmd_trace,
 		  (((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc)));
 
@@ -1371,7 +1371,7 @@ static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
 	unsigned long start_time = 0;
 	struct fnic_stats *fnic_stats = &fnic->fnic_stats;
 
-	io_lock = fnic_io_lock_tag(fnic, sc->request->tag);
+	io_lock = fnic_io_lock_tag(fnic, blk_req(sc)->tag);
 	spin_lock_irqsave(io_lock, flags);
 
 	io_req = (struct fnic_io_req *)CMD_SP(sc);
@@ -1413,7 +1413,7 @@ static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
 	sc->result = DID_TRANSPORT_DISRUPTED << 16;
 	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
 		      "fnic_cleanup_io: tag:0x%x : sc:0x%p duration = %lu DID_TRANSPORT_DISRUPTED\n",
-		      sc->request->tag, sc, (jiffies - start_time));
+		      blk_req(sc)->tag, sc, jiffies - start_time);
 
 	if (atomic64_read(&fnic->io_cmpl_skip))
 		atomic64_dec(&fnic->io_cmpl_skip);
@@ -1425,10 +1425,10 @@ static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
 		if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED))
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "Calling done for IO not issued to fw: tag:0x%x sc:0x%p\n",
-				     sc->request->tag, sc);
+				     blk_req(sc)->tag, sc);
 
 		FNIC_TRACE(fnic_cleanup_io,
-			   sc->device->host->host_no, sc->request->tag, sc,
+			   sc->device->host->host_no, blk_req(sc)->tag, sc,
 			   jiffies_to_msecs(jiffies - start_time),
 			   0, ((u64)sc->cmnd[0] << 32 |
 			       (u64)sc->cmnd[2] << 24 |
@@ -1566,7 +1566,7 @@ static bool fnic_rport_abort_io_iter(struct scsi_cmnd *sc, void *data,
 {
 	struct fnic_rport_abort_io_iter_data *iter_data = data;
 	struct fnic *fnic = iter_data->fnic;
-	int abt_tag = sc->request->tag;
+	int abt_tag = blk_req(sc)->tag;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
@@ -1757,7 +1757,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 	term_stats = &fnic->fnic_stats.term_stats;
 
 	rport = starget_to_rport(scsi_target(sc->device));
-	tag = sc->request->tag;
+	tag = blk_req(sc)->tag;
 	FNIC_SCSI_DBG(KERN_DEBUG,
 		fnic->lport->host,
 		"Abort Cmd called FCID 0x%x, LUN 0x%llx TAG %x flags %x\n",
@@ -1842,7 +1842,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 	/* Now queue the abort command to firmware */
 	int_to_scsilun(sc->device->lun, &fc_lun);
 
-	if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
+	if (fnic_queue_abort_io_req(fnic, blk_req(sc)->tag, task_req,
 				    fc_lun.scsi_lun, io_req)) {
 		spin_lock_irqsave(io_lock, flags);
 		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
@@ -1944,7 +1944,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 
 fnic_abort_cmd_end:
 	FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no,
-		  sc->request->tag, sc,
+		  blk_req(sc)->tag, sc,
 		  jiffies_to_msecs(jiffies - start_time),
 		  0, ((u64)sc->cmnd[0] << 32 |
 		  (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |
@@ -1994,7 +1994,7 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic,
 	/* fill in the lun info */
 	int_to_scsilun(sc->device->lun, &fc_lun);
 
-	fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST,
+	fnic_queue_wq_copy_desc_itmf(wq, blk_req(sc)->tag | FNIC_TAG_DEV_RST,
 				     0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG,
 				     fc_lun.scsi_lun, io_req->port_id,
 				     fnic->config.ra_tov, fnic->config.ed_tov);
@@ -2025,7 +2025,7 @@ static bool fnic_pending_aborts_iter(struct scsi_cmnd *sc,
 	struct fnic_pending_aborts_iter_data *iter_data = data;
 	struct fnic *fnic = iter_data->fnic;
 	struct scsi_device *lun_dev = iter_data->lun_dev;
-	int abt_tag = sc->request->tag;
+	int abt_tag = blk_req(sc)->tag;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
@@ -2206,14 +2206,16 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 static inline int
 fnic_scsi_host_start_tag(struct fnic *fnic, struct scsi_cmnd *sc)
 {
-	struct request_queue *q = sc->request->q;
+	struct request_queue *q = blk_req(sc)->q;
 	struct request *dummy;
 
 	dummy = blk_mq_alloc_request(q, REQ_OP_WRITE, BLK_MQ_REQ_NOWAIT);
 	if (IS_ERR(dummy))
 		return SCSI_NO_TAG;
 
-	sc->tag = sc->request->tag = dummy->tag;
+	WARN_ON_ONCE(blk_req(sc)->tag);
+	WARN_ON_ONCE(sc->tag);
+	sc->tag = blk_req(sc)->tag = dummy->tag;
 	sc->host_scribble = (unsigned char *)dummy;
 
 	return dummy->tag;
@@ -2284,7 +2286,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 	CMD_FLAGS(sc) = FNIC_DEVICE_RESET;
 	/* Allocate tag if not present */
 
-	tag = sc->request->tag;
+	tag = blk_req(sc)->tag;
 	if (unlikely(tag < 0)) {
 		/*
 		 * Really should fix the midlayer to pass in a proper
@@ -2459,7 +2461,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 
 fnic_device_reset_end:
 	FNIC_TRACE(fnic_device_reset, sc->device->host->host_no,
-		  sc->request->tag, sc,
+		  blk_req(sc)->tag, sc,
 		  jiffies_to_msecs(jiffies - start_time),
 		  0, ((u64)sc->cmnd[0] << 32 |
 		  (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |

[PATCH 20/50] hisi_sas: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 4 ++--
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 5a204074099c..9a93a3374d65 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -185,7 +185,7 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba,
 	void *bitmap = hisi_hba->slot_index_tags;
 
 	if (scsi_cmnd)
-		return scsi_cmnd->request->tag;
+		return blk_req(scsi_cmnd)->tag;
 
 	spin_lock(&hisi_hba->lock);
 	index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
@@ -449,7 +449,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		unsigned int dq_index;
 		u32 blk_tag;
 
-		blk_tag = blk_mq_unique_tag(scmd->request);
+		blk_tag = blk_mq_unique_tag(blk_req(scmd));
 		dq_index = blk_mq_unique_tag_to_hwq(blk_tag);
 		*dq_pointer = dq = &hisi_hba->dq[dq_index];
 	} else {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 499c770d405c..ed02eecd606d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1153,7 +1153,7 @@ static void fill_prot_v3_hw(struct scsi_cmnd *scsi_cmnd,
 {
 	unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
 	unsigned int interval = scsi_prot_interval(scsi_cmnd);
-	u32 lbrt_chk_val = t10_pi_ref_tag(scsi_cmnd->request);
+	u32 lbrt_chk_val = t10_pi_ref_tag(blk_req(scsi_cmnd));
 
 	switch (prot_op) {
 	case SCSI_PROT_READ_INSERT:

[PATCH 21/50] hpsa: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/hpsa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index f135a10f582b..9fcbe9a84de6 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5686,7 +5686,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	/* Get the ptr to our adapter structure out of cmd->host. */
 	h = sdev_to_hba(cmd->device);
 
-	BUG_ON(cmd->request->tag < 0);
+	BUG_ON(blk_req(cmd)->tag < 0);
 
 	dev = cmd->device->hostdata;
 	if (!dev) {
@@ -5729,7 +5729,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	 *       and is therefore a brand-new command.
 	 */
 	if (likely(cmd->retries == 0 &&
-			!blk_rq_is_passthrough(cmd->request) &&
+			!blk_rq_is_passthrough(blk_req(cmd)) &&
 			h->acciopath_status)) {
 		/* Submit with the retry_pending flag unset. */
 		rc = hpsa_ioaccel_submit(h, c, cmd, false);
@@ -5894,7 +5894,7 @@ static int hpsa_scsi_add_host(struct ctlr_info *h)
  */
 static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
 {
-	int idx = scmd->request->tag;
+	int idx = blk_req(scmd)->tag;
 
 	if (idx < 0)
 		return idx;

[PATCH 22/50] ibmvfc: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 6540d48eb0e8..e8b4f72f9161 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1908,7 +1908,7 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 	struct ibmvfc_cmd *vfc_cmd;
 	struct ibmvfc_fcp_cmd_iu *iu;
 	struct ibmvfc_event *evt;
-	u32 tag_and_hwq = blk_mq_unique_tag(cmnd->request);
+	u32 tag_and_hwq = blk_mq_unique_tag(blk_req(cmnd));
 	u16 hwq = blk_mq_unique_tag_to_hwq(tag_and_hwq);
 	u16 scsi_channel;
 	int rc;

[PATCH 23/50] ibmvscsi: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index e75b0068ad84..48e07b8a6b63 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1072,7 +1072,7 @@ static int ibmvscsi_queuecommand_lck(struct scsi_cmnd *cmnd,
 	init_event_struct(evt_struct,
 			  handle_cmd_rsp,
 			  VIOSRP_SRP_FORMAT,
-			  cmnd->request->timeout/HZ);
+			  blk_req(cmnd)->timeout / HZ);
 
 	evt_struct->cmnd = cmnd;
 	evt_struct->cmnd_done = done;

[PATCH 24/50] ips: Use blk_req() instead of scsi_cmnd.request

[Bart Van Assche]

Prepare for removal of the request pointer by using blk_req() instead. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ips.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index bc33d54a4011..6bcc655d1f15 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3733,7 +3733,7 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb)
 		scb->cmd.dcdb.segment_4G = 0;
 		scb->cmd.dcdb.enhanced_sg = 0;
 
-		TimeOut = scb->scsi_cmd->request->timeout;
+		TimeOut = blk_req(scb->scsi_cmd)->timeout;
 
 		if (ha->subsys->param[4] & 0x00100000) {	/* If NEW Tape DCDB is Supported */
 			if (!scb->sg_len) {

Re: [PATCH 01/50] core: Introduce the blk_req() function

[Christoph Hellwig]

> +/* Variant of blk_mq_rq_from_pdu() that verifies the type of its argument. */
> +static inline struct request *blk_req(struct scsi_cmnd *scmd)

Please don't use a blk_ prefix for a SCSI funtion.  Why not scsi_scmd_to_rq
or something like that?

Re: [PATCH 49/50] usb-storage: Use blk_req() instead of scsi_cmnd.request

[Alan Stern]

On Fri, May 14, 2021 at 02:33:04PM -0700, Bart Van Assche wrote:
> Prepare for removal of the request pointer by using blk_req() instead. This
> patch does not change any functionality.
> 
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> ---

Acked-by: Alan Stern <stern@rowland.harvard.edu>

>  drivers/usb/storage/transport.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
> index f4304ce69350..53cc76b51ed7 100644
> --- a/drivers/usb/storage/transport.c
> +++ b/drivers/usb/storage/transport.c
> @@ -551,7 +551,7 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
>  	/* Did this command access the last sector? */
>  	sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) |
>  			(srb->cmnd[4] << 8) | (srb->cmnd[5]);
> -	disk = srb->request->rq_disk;
> +	disk = blk_req(srb)->rq_disk;
>  	if (!disk)
>  		goto done;
>  	sdkp = scsi_disk(disk);

Re: [PATCH 20/50] hisi_sas: Use blk_req() instead of scsi_cmnd.request

[John Garry]

On 14/05/2021 22:33, Bart Van Assche wrote:
> Prepare for removal of the request pointer by using blk_req() instead. This
> patch does not change any functionality.
> 
> Signed-off-by: Bart Van Assche<bvanassche@acm.org>

Acked-by: John Garry <john.garry@huawei.com>

Re: [PATCH 01/50] core: Introduce the blk_req() function

[Bart Van Assche]

On 5/14/21 11:47 PM, Christoph Hellwig wrote:
>> +/* Variant of blk_mq_rq_from_pdu() that verifies the type of its argument. */
>> +static inline struct request *blk_req(struct scsi_cmnd *scmd)
> 
> Please don't use a blk_ prefix for a SCSI funtion.  Why not scsi_scmd_to_rq
> or something like that?

Hi Christoph,

Thanks for having taken a look. I will rename that function into
scsi_cmd_to_rq().

Bart.

Re: [PATCH 10/50] zfcp: Use blk_req() instead of scsi_cmnd.request

[Benjamin Block]

On Fri, May 14, 2021 at 02:33:16PM -0700, Bart Van Assche wrote:
> Prepare for removal of the request pointer by using blk_req() instead. This
> patch does not change any functionality.
> 
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> ---
>  drivers/s390/scsi/zfcp_fsf.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
> index 2e4804ef2fb9..ac9223a7677d 100644
> --- a/drivers/s390/scsi/zfcp_fsf.c
> +++ b/drivers/s390/scsi/zfcp_fsf.c
> @@ -2377,7 +2377,7 @@ static void zfcp_fsf_req_trace(struct zfcp_fsf_req *req, struct scsi_cmnd *scsi)
>  		}
>  	}
>  
> -	blk_add_driver_data(scsi->request, &blktrc, sizeof(blktrc));
> +	blk_add_driver_data(blk_req(scsi), &blktrc, sizeof(blktrc));
>  }
>  
>  /**

Looks good.

Acked-by: Benjamin Block <bblock@linux.ibm.com>


If you only rename `blk_req()`, like you suggested in the conversation
with Christoph, and nothing else changes, feel free to carry the
Acked-by over.

-- 
Best Regards, Benjamin Block  / Linux on IBM Z Kernel Development / IBM Systems
IBM Deutschland Research & Development GmbH    /    https://www.ibm.com/privacy
Vorsitz. AufsR.: Gregor Pillen         /        Geschäftsführung: Dirk Wittkopp
Sitz der Gesellschaft: Böblingen / Registergericht: AmtsG Stuttgart, HRB 243294