Hello Thorsten,

your mail is whitespace damaged and cannot be applied directly. As you
used git-send-email this is probably a case for Eckelmann IT ...

On Sat, May 15, 2021 at 10:20:17AM +0200, Thorsten Scherer wrote:
> a787e5400a1c ("driver core: add device probe log helper") introduced a
> helper for a common error checking pattern.  Use it.

Please test your patch using scripts/checkpatch and fix the issued
errors (or argument why you chose not to follow its recommendations).

> Signed-off-by: Thorsten Scherer <t.scherer@eckelmann.de>
> ---
>  drivers/siox/siox-bus-gpio.c | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c
> index 46b4cda36bac..aeefeb725524 100644
> --- a/drivers/siox/siox-bus-gpio.c
> +++ b/drivers/siox/siox-bus-gpio.c
> @@ -102,29 +102,29 @@ static int siox_gpio_probe(struct platform_device *pdev)
> 
>         ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN);
>         if (IS_ERR(ddata->din)) {
> -               ret = PTR_ERR(ddata->din);
> -               dev_err(dev, "Failed to get %s GPIO: %d\n", "din", ret);
> +               ret = dev_err_probe(dev, PTR_ERR(ddata->din),
> +                                   "Failed to get din GPIO\n");

Huh, I'm surprised. I did

diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c
index aeefeb725524..b97fde71a6a0 100644
--- a/drivers/siox/siox-bus-gpio.c
+++ b/drivers/siox/siox-bus-gpio.c
@@ -103,28 +103,28 @@ static int siox_gpio_probe(struct platform_device *pdev)
 	ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN);
 	if (IS_ERR(ddata->din)) {
 		ret = dev_err_probe(dev, PTR_ERR(ddata->din),
-				    "Failed to get din GPIO\n");
+				    "Failed to get %s GPIO\n", "din");
 		goto err;
 	}
 
 	ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW);
 	if (IS_ERR(ddata->dout)) {
 		ret = dev_err_probe(dev, PTR_ERR(ddata->dout),
-				    "Failed to get dout GPIO\n");
+				    "Failed to get %s GPIO\n", "dout");
 		goto err;
 	}
 
 	ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW);
 	if (IS_ERR(ddata->dclk)) {
 		ret = dev_err_probe(dev, PTR_ERR(ddata->dclk),
-				    "Failed to get dclk GPIO\n");
+				    "Failed to get %s GPIO\n", "dclk");
 		goto err;
 	}
 
 	ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW);
 	if (IS_ERR(ddata->dld)) {
 		ret = dev_err_probe(dev, PTR_ERR(ddata->dld),
-				    "Failed to get dld GPIO\n");
+				    "Failed to get %s GPIO\n", "dld");
 		goto err;
 	}
 
on top of your patch and the binary size increased (using ARCH=arm and
gcc 7.3.1). So no objection from me to get rid of this idiom.

>                 goto err;
>         }
> 
>         ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW);
>         if (IS_ERR(ddata->dout)) {
> -               ret = PTR_ERR(ddata->dout);
> -               dev_err(dev, "Failed to get %s GPIO: %d\n", "dout", ret);
> +               ret = dev_err_probe(dev, PTR_ERR(ddata->dout),
> +                                   "Failed to get dout GPIO\n");
>                 goto err;
>         }
> 
>         ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW);
>         if (IS_ERR(ddata->dclk)) {
> -               ret = PTR_ERR(ddata->dclk);
> -               dev_err(dev, "Failed to get %s GPIO: %d\n", "dclk", ret);
> +               ret = dev_err_probe(dev, PTR_ERR(ddata->dclk),
> +                                   "Failed to get dclk GPIO\n");
>                 goto err;
>         }
> 
>         ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW);
>         if (IS_ERR(ddata->dld)) {
> -               ret = PTR_ERR(ddata->dld);
> -               dev_err(dev, "Failed to get %s GPIO: %d\n", "dld", ret);
> +               ret = dev_err_probe(dev, PTR_ERR(ddata->dld),
> +                                   "Failed to get dld GPIO\n");
>                 goto err;
>         }
> 
> @@ -134,7 +134,8 @@ static int siox_gpio_probe(struct platform_device *pdev)
> 
>         ret = siox_master_register(smaster);
>         if (ret) {
> -               dev_err(dev, "Failed to register siox master: %d\n", ret);
> +               dev_err_probe(dev, ret,
> +                             "Failed to register siox master\n");
>  err:
>                 siox_master_put(smaster);
>         }
> --
> 2.29.2
> 
> Eckelmann AG
> Vorstand: Dipl.-Ing. Peter Frankenbach (Sprecher) Dipl.-Wi.-Ing. Philipp Eckelmann
> Dr.-Ing. Marco M?nchhof

Another issue for your IT department: Tell them please to not append
latin1 encoded footers to mails that don't declare an encoding (and so
are implicitly ASCII only). I didn't check but I assume this will earn
you a few spam assassin points ...

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |