From: Douglas Anderson <dianders@chromium.org> To: Andrzej Hajda <a.hajda@samsung.com>, Neil Armstrong <narmstrong@baylibre.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Jonas Karlman <jonas@kwiboo.se>, Jernej Skrabec <jernej.skrabec@siol.net>, Sam Ravnborg <sam@ravnborg.org> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>, Lyude Paul <lyude@redhat.com>, Thierry Reding <treding@nvidia.com>, Stephen Boyd <swboyd@chromium.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, linux-arm-msm@vger.kernel.org, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Linus W <linus.walleij@linaro.org>, dri-devel@lists.freedesktop.org, robdclark@chromium.org, Steev Klimaszewski <steev@kali.org>, Douglas Anderson <dianders@chromium.org>, Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v7 10/10] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip Date: Mon, 17 May 2021 13:09:07 -0700 [thread overview] Message-ID: <20210517130450.v7.10.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid> (raw) In-Reply-To: <20210517200907.1459182-1-dianders@chromium.org> Putting the panel under the bridge chip (under the aux-bus node) allows the panel driver to get access to the DP AUX bus, enabling all sorts of fabulous new features. While we're at this, get rid of a level of hierarchy for the panel node. It doesn't need "ports / port" and can just have a "port" child. For Linux, this patch has a hard requirement on the patches adding DP AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v7: - Panel now under bridge chip instead of getting a link to ddc-i2c arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 24d293ef56d7..c76afd857b54 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -260,21 +260,6 @@ max98357a: audio-codec-0 { #sound-dai-cells = <0>; }; - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - pwmleds { compatible = "pwm-leds"; keyboard_backlight: keyboard-backlight { @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint { }; }; }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; }; }; -- 2.31.1.751.gd2f1c929bd-goog
WARNING: multiple messages have this Message-ID (diff)
From: Douglas Anderson <dianders@chromium.org> To: Andrzej Hajda <a.hajda@samsung.com>, Neil Armstrong <narmstrong@baylibre.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Jonas Karlman <jonas@kwiboo.se>, Jernej Skrabec <jernej.skrabec@siol.net>, Sam Ravnborg <sam@ravnborg.org> Cc: robdclark@chromium.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>, Douglas Anderson <dianders@chromium.org>, dri-devel@lists.freedesktop.org, Bjorn Andersson <bjorn.andersson@linaro.org>, Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>, Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>, Steev Klimaszewski <steev@kali.org>, Thierry Reding <treding@nvidia.com>, linux-kernel@vger.kernel.org Subject: [PATCH v7 10/10] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip Date: Mon, 17 May 2021 13:09:07 -0700 [thread overview] Message-ID: <20210517130450.v7.10.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid> (raw) In-Reply-To: <20210517200907.1459182-1-dianders@chromium.org> Putting the panel under the bridge chip (under the aux-bus node) allows the panel driver to get access to the DP AUX bus, enabling all sorts of fabulous new features. While we're at this, get rid of a level of hierarchy for the panel node. It doesn't need "ports / port" and can just have a "port" child. For Linux, this patch has a hard requirement on the patches adding DP AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v7: - Panel now under bridge chip instead of getting a link to ddc-i2c arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 24d293ef56d7..c76afd857b54 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -260,21 +260,6 @@ max98357a: audio-codec-0 { #sound-dai-cells = <0>; }; - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - pwmleds { compatible = "pwm-leds"; keyboard_backlight: keyboard-backlight { @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint { }; }; }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; }; }; -- 2.31.1.751.gd2f1c929bd-goog
next prev parent reply other threads:[~2021-05-17 20:10 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-17 20:08 [PATCH v7 00/10] drm: Fix EDID reading on ti-sn65dsi86 by introducing the DP AUX bus Douglas Anderson 2021-05-17 20:08 ` Douglas Anderson 2021-05-17 20:08 ` [PATCH v7 01/10] drm/panel: panel-simple: Add missing pm_runtime_dont_use_autosuspend() calls Douglas Anderson 2021-05-17 20:08 ` Douglas Anderson 2021-05-24 20:22 ` Laurent Pinchart 2021-05-24 20:22 ` Laurent Pinchart 2021-05-24 21:08 ` Doug Anderson 2021-05-24 21:08 ` Doug Anderson 2021-05-17 20:08 ` [PATCH v7 02/10] dt-bindings: display: simple: List hpd properties in panel-simple Douglas Anderson 2021-05-17 20:08 ` Douglas Anderson 2021-05-18 12:41 ` Rob Herring 2021-05-18 12:41 ` Rob Herring 2021-05-18 13:58 ` Doug Anderson 2021-05-18 13:58 ` Doug Anderson 2021-05-22 10:38 ` Linus Walleij 2021-05-22 10:38 ` Linus Walleij 2021-05-17 20:09 ` [PATCH v7 03/10] dt-bindings: drm/bridge: ti-sn65dsi86: Add aux-bus child Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-19 20:01 ` Rob Herring 2021-05-19 20:01 ` Rob Herring 2021-05-19 21:06 ` Doug Anderson 2021-05-19 21:06 ` Doug Anderson 2021-05-20 13:25 ` Rob Herring 2021-05-20 13:25 ` Rob Herring 2021-05-17 20:09 ` [PATCH v7 04/10] drm: Introduce the DP AUX bus Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-22 10:34 ` Linus Walleij 2021-05-22 10:34 ` Linus Walleij 2021-05-17 20:09 ` [PATCH v7 05/10] drm/panel: panel-simple: Allow panel-simple be a DP AUX endpoint device Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-17 20:09 ` [PATCH v7 06/10] drm/panel: panel-simple: Stash DP AUX bus; allow using it for DDC Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-17 20:09 ` [PATCH v7 07/10] drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-17 20:09 ` [PATCH v7 08/10] drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-22 10:35 ` Linus Walleij 2021-05-22 10:35 ` Linus Walleij 2021-05-24 20:29 ` Lyude Paul 2021-05-24 20:29 ` Lyude Paul 2021-05-17 20:09 ` [PATCH v7 09/10] drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDC Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson 2021-05-17 20:09 ` Douglas Anderson [this message] 2021-05-17 20:09 ` [PATCH v7 10/10] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip Douglas Anderson 2021-05-22 10:40 ` Linus Walleij 2021-05-22 10:40 ` Linus Walleij 2021-05-19 21:41 ` [PATCH v7 00/10] drm: Fix EDID reading on ti-sn65dsi86 by introducing the DP AUX bus Lyude Paul 2021-05-19 21:41 ` Lyude Paul 2021-05-21 23:07 ` Lyude Paul 2021-05-21 23:07 ` Lyude Paul 2021-05-24 15:14 ` Doug Anderson 2021-05-24 15:14 ` Doug Anderson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210517130450.v7.10.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid \ --to=dianders@chromium.org \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@siol.net \ --cc=jonas@kwiboo.se \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lyude@redhat.com \ --cc=maarten.lankhorst@linux.intel.com \ --cc=narmstrong@baylibre.com \ --cc=robdclark@chromium.org \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=stanislav.lisovskiy@intel.com \ --cc=steev@kali.org \ --cc=swboyd@chromium.org \ --cc=treding@nvidia.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.