* [PATCH v5 0/9] Speedup mremap on ppc64
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
Hi,
This patchset enables MOVE_PMD/MOVE_PUD support on power. This requires
the platform to support updating higher-level page tables without
updating page table entries. This also needs to invalidate the Page Walk
Cache on architecture supporting the same.
Changes from v4:
* Change function name and arguments based on review feedback.
Changes from v3:
* Fix build error reported by kernel test robot
* Address review feedback.
Changes from v2:
* switch from using mmu_gather to flush_pte_tlb_pwc_range()
Changes from v1:
* Rebase to recent upstream
* Fix build issues with tlb_gather_mmu changes
Aneesh Kumar K.V (9):
selftest/mremap_test: Update the test to handle pagesize other than 4K
selftest/mremap_test: Avoid crash with static build
mm/mremap: Use pmd/pud_poplulate to update page table entries
powerpc/mm/book3s64: Fix possible build error
powerpc/mm/book3s64: Update tlb flush routines to take a page walk
cache flush argument
mm/mremap: Use range flush that does TLB and page walk cache flush
mm/mremap: Move TLB flush outside page table lock
mm/mremap: Allow arch runtime override
powerpc/mm: Enable move pmd/pud
.../include/asm/book3s/64/tlbflush-radix.h | 19 +--
arch/powerpc/include/asm/book3s/64/tlbflush.h | 29 ++++-
arch/powerpc/include/asm/tlb.h | 6 +
arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +-
arch/powerpc/mm/book3s64/radix_tlb.c | 55 ++++----
arch/powerpc/platforms/Kconfig.cputype | 2 +
mm/mremap.c | 40 ++++--
tools/testing/selftests/vm/mremap_test.c | 118 ++++++++++--------
8 files changed, 170 insertions(+), 103 deletions(-)
--
2.30.2
^ permalink raw reply [flat|nested] 106+ messages in thread* [PATCH v5 1/9] selftest/mremap_test: Update the test to handle pagesize other than 4K
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
Instead of hardcoding 4K page size fetch it using sysconf(). For the performance
measurements test still assume 2M and 1G are hugepage sizes.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
tools/testing/selftests/vm/mremap_test.c | 113 ++++++++++++-----------
1 file changed, 61 insertions(+), 52 deletions(-)
diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c
index 9c391d016922..c9a5461eb786 100644
--- a/tools/testing/selftests/vm/mremap_test.c
+++ b/tools/testing/selftests/vm/mremap_test.c
@@ -45,14 +45,15 @@ enum {
_4MB = 4ULL << 20,
_1GB = 1ULL << 30,
_2GB = 2ULL << 30,
- PTE = _4KB,
PMD = _2MB,
PUD = _1GB,
};
+#define PTE page_size
+
#define MAKE_TEST(source_align, destination_align, size, \
overlaps, should_fail, test_name) \
-{ \
+(struct test){ \
.name = test_name, \
.config = { \
.src_alignment = source_align, \
@@ -252,12 +253,17 @@ static int parse_args(int argc, char **argv, unsigned int *threshold_mb,
return 0;
}
+#define MAX_TEST 13
+#define MAX_PERF_TEST 3
int main(int argc, char **argv)
{
int failures = 0;
int i, run_perf_tests;
unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD;
unsigned int pattern_seed;
+ struct test test_cases[MAX_TEST];
+ struct test perf_test_cases[MAX_PERF_TEST];
+ int page_size;
time_t t;
pattern_seed = (unsigned int) time(&t);
@@ -268,56 +274,59 @@ int main(int argc, char **argv)
ksft_print_msg("Test configs:\n\tthreshold_mb=%u\n\tpattern_seed=%u\n\n",
threshold_mb, pattern_seed);
- struct test test_cases[] = {
- /* Expected mremap failures */
- MAKE_TEST(_4KB, _4KB, _4KB, OVERLAPPING, EXPECT_FAILURE,
- "mremap - Source and Destination Regions Overlapping"),
- MAKE_TEST(_4KB, _1KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE,
- "mremap - Destination Address Misaligned (1KB-aligned)"),
- MAKE_TEST(_1KB, _4KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE,
- "mremap - Source Address Misaligned (1KB-aligned)"),
-
- /* Src addr PTE aligned */
- MAKE_TEST(PTE, PTE, _8KB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "8KB mremap - Source PTE-aligned, Destination PTE-aligned"),
-
- /* Src addr 1MB aligned */
- MAKE_TEST(_1MB, PTE, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2MB mremap - Source 1MB-aligned, Destination PTE-aligned"),
- MAKE_TEST(_1MB, _1MB, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2MB mremap - Source 1MB-aligned, Destination 1MB-aligned"),
-
- /* Src addr PMD aligned */
- MAKE_TEST(PMD, PTE, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "4MB mremap - Source PMD-aligned, Destination PTE-aligned"),
- MAKE_TEST(PMD, _1MB, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "4MB mremap - Source PMD-aligned, Destination 1MB-aligned"),
- MAKE_TEST(PMD, PMD, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "4MB mremap - Source PMD-aligned, Destination PMD-aligned"),
-
- /* Src addr PUD aligned */
- MAKE_TEST(PUD, PTE, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination PTE-aligned"),
- MAKE_TEST(PUD, _1MB, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination 1MB-aligned"),
- MAKE_TEST(PUD, PMD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination PMD-aligned"),
- MAKE_TEST(PUD, PUD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination PUD-aligned"),
- };
-
- struct test perf_test_cases[] = {
- /*
- * mremap 1GB region - Page table level aligned time
- * comparison.
- */
- MAKE_TEST(PTE, PTE, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "1GB mremap - Source PTE-aligned, Destination PTE-aligned"),
- MAKE_TEST(PMD, PMD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "1GB mremap - Source PMD-aligned, Destination PMD-aligned"),
- MAKE_TEST(PUD, PUD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "1GB mremap - Source PUD-aligned, Destination PUD-aligned"),
- };
+ page_size = sysconf(_SC_PAGESIZE);
+
+ /* Expected mremap failures */
+ test_cases[0] = MAKE_TEST(page_size, page_size, page_size,
+ OVERLAPPING, EXPECT_FAILURE,
+ "mremap - Source and Destination Regions Overlapping");
+
+ test_cases[1] = MAKE_TEST(page_size, page_size/4, page_size,
+ NON_OVERLAPPING, EXPECT_FAILURE,
+ "mremap - Destination Address Misaligned (1KB-aligned)");
+ test_cases[2] = MAKE_TEST(page_size/4, page_size, page_size,
+ NON_OVERLAPPING, EXPECT_FAILURE,
+ "mremap - Source Address Misaligned (1KB-aligned)");
+
+ /* Src addr PTE aligned */
+ test_cases[3] = MAKE_TEST(PTE, PTE, PTE * 2,
+ NON_OVERLAPPING, EXPECT_SUCCESS,
+ "8KB mremap - Source PTE-aligned, Destination PTE-aligned");
+
+ /* Src addr 1MB aligned */
+ test_cases[4] = MAKE_TEST(_1MB, PTE, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2MB mremap - Source 1MB-aligned, Destination PTE-aligned");
+ test_cases[5] = MAKE_TEST(_1MB, _1MB, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2MB mremap - Source 1MB-aligned, Destination 1MB-aligned");
+
+ /* Src addr PMD aligned */
+ test_cases[6] = MAKE_TEST(PMD, PTE, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "4MB mremap - Source PMD-aligned, Destination PTE-aligned");
+ test_cases[7] = MAKE_TEST(PMD, _1MB, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "4MB mremap - Source PMD-aligned, Destination 1MB-aligned");
+ test_cases[8] = MAKE_TEST(PMD, PMD, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "4MB mremap - Source PMD-aligned, Destination PMD-aligned");
+
+ /* Src addr PUD aligned */
+ test_cases[9] = MAKE_TEST(PUD, PTE, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination PTE-aligned");
+ test_cases[10] = MAKE_TEST(PUD, _1MB, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination 1MB-aligned");
+ test_cases[11] = MAKE_TEST(PUD, PMD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination PMD-aligned");
+ test_cases[12] = MAKE_TEST(PUD, PUD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination PUD-aligned");
+
+ perf_test_cases[0] = MAKE_TEST(page_size, page_size, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "1GB mremap - Source PTE-aligned, Destination PTE-aligned");
+ /*
+ * mremap 1GB region - Page table level aligned time
+ * comparison.
+ */
+ perf_test_cases[1] = MAKE_TEST(PMD, PMD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "1GB mremap - Source PMD-aligned, Destination PMD-aligned");
+ perf_test_cases[2] = MAKE_TEST(PUD, PUD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "1GB mremap - Source PUD-aligned, Destination PUD-aligned");
run_perf_tests = (threshold_mb == VALIDATION_NO_THRESHOLD) ||
(threshold_mb * _1MB >= _1GB);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* [PATCH v5 1/9] selftest/mremap_test: Update the test to handle pagesize other than 4K
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
Instead of hardcoding 4K page size fetch it using sysconf(). For the performance
measurements test still assume 2M and 1G are hugepage sizes.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
tools/testing/selftests/vm/mremap_test.c | 113 ++++++++++++-----------
1 file changed, 61 insertions(+), 52 deletions(-)
diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c
index 9c391d016922..c9a5461eb786 100644
--- a/tools/testing/selftests/vm/mremap_test.c
+++ b/tools/testing/selftests/vm/mremap_test.c
@@ -45,14 +45,15 @@ enum {
_4MB = 4ULL << 20,
_1GB = 1ULL << 30,
_2GB = 2ULL << 30,
- PTE = _4KB,
PMD = _2MB,
PUD = _1GB,
};
+#define PTE page_size
+
#define MAKE_TEST(source_align, destination_align, size, \
overlaps, should_fail, test_name) \
-{ \
+(struct test){ \
.name = test_name, \
.config = { \
.src_alignment = source_align, \
@@ -252,12 +253,17 @@ static int parse_args(int argc, char **argv, unsigned int *threshold_mb,
return 0;
}
+#define MAX_TEST 13
+#define MAX_PERF_TEST 3
int main(int argc, char **argv)
{
int failures = 0;
int i, run_perf_tests;
unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD;
unsigned int pattern_seed;
+ struct test test_cases[MAX_TEST];
+ struct test perf_test_cases[MAX_PERF_TEST];
+ int page_size;
time_t t;
pattern_seed = (unsigned int) time(&t);
@@ -268,56 +274,59 @@ int main(int argc, char **argv)
ksft_print_msg("Test configs:\n\tthreshold_mb=%u\n\tpattern_seed=%u\n\n",
threshold_mb, pattern_seed);
- struct test test_cases[] = {
- /* Expected mremap failures */
- MAKE_TEST(_4KB, _4KB, _4KB, OVERLAPPING, EXPECT_FAILURE,
- "mremap - Source and Destination Regions Overlapping"),
- MAKE_TEST(_4KB, _1KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE,
- "mremap - Destination Address Misaligned (1KB-aligned)"),
- MAKE_TEST(_1KB, _4KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE,
- "mremap - Source Address Misaligned (1KB-aligned)"),
-
- /* Src addr PTE aligned */
- MAKE_TEST(PTE, PTE, _8KB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "8KB mremap - Source PTE-aligned, Destination PTE-aligned"),
-
- /* Src addr 1MB aligned */
- MAKE_TEST(_1MB, PTE, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2MB mremap - Source 1MB-aligned, Destination PTE-aligned"),
- MAKE_TEST(_1MB, _1MB, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2MB mremap - Source 1MB-aligned, Destination 1MB-aligned"),
-
- /* Src addr PMD aligned */
- MAKE_TEST(PMD, PTE, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "4MB mremap - Source PMD-aligned, Destination PTE-aligned"),
- MAKE_TEST(PMD, _1MB, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "4MB mremap - Source PMD-aligned, Destination 1MB-aligned"),
- MAKE_TEST(PMD, PMD, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "4MB mremap - Source PMD-aligned, Destination PMD-aligned"),
-
- /* Src addr PUD aligned */
- MAKE_TEST(PUD, PTE, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination PTE-aligned"),
- MAKE_TEST(PUD, _1MB, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination 1MB-aligned"),
- MAKE_TEST(PUD, PMD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination PMD-aligned"),
- MAKE_TEST(PUD, PUD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "2GB mremap - Source PUD-aligned, Destination PUD-aligned"),
- };
-
- struct test perf_test_cases[] = {
- /*
- * mremap 1GB region - Page table level aligned time
- * comparison.
- */
- MAKE_TEST(PTE, PTE, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "1GB mremap - Source PTE-aligned, Destination PTE-aligned"),
- MAKE_TEST(PMD, PMD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "1GB mremap - Source PMD-aligned, Destination PMD-aligned"),
- MAKE_TEST(PUD, PUD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
- "1GB mremap - Source PUD-aligned, Destination PUD-aligned"),
- };
+ page_size = sysconf(_SC_PAGESIZE);
+
+ /* Expected mremap failures */
+ test_cases[0] = MAKE_TEST(page_size, page_size, page_size,
+ OVERLAPPING, EXPECT_FAILURE,
+ "mremap - Source and Destination Regions Overlapping");
+
+ test_cases[1] = MAKE_TEST(page_size, page_size/4, page_size,
+ NON_OVERLAPPING, EXPECT_FAILURE,
+ "mremap - Destination Address Misaligned (1KB-aligned)");
+ test_cases[2] = MAKE_TEST(page_size/4, page_size, page_size,
+ NON_OVERLAPPING, EXPECT_FAILURE,
+ "mremap - Source Address Misaligned (1KB-aligned)");
+
+ /* Src addr PTE aligned */
+ test_cases[3] = MAKE_TEST(PTE, PTE, PTE * 2,
+ NON_OVERLAPPING, EXPECT_SUCCESS,
+ "8KB mremap - Source PTE-aligned, Destination PTE-aligned");
+
+ /* Src addr 1MB aligned */
+ test_cases[4] = MAKE_TEST(_1MB, PTE, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2MB mremap - Source 1MB-aligned, Destination PTE-aligned");
+ test_cases[5] = MAKE_TEST(_1MB, _1MB, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2MB mremap - Source 1MB-aligned, Destination 1MB-aligned");
+
+ /* Src addr PMD aligned */
+ test_cases[6] = MAKE_TEST(PMD, PTE, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "4MB mremap - Source PMD-aligned, Destination PTE-aligned");
+ test_cases[7] = MAKE_TEST(PMD, _1MB, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "4MB mremap - Source PMD-aligned, Destination 1MB-aligned");
+ test_cases[8] = MAKE_TEST(PMD, PMD, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "4MB mremap - Source PMD-aligned, Destination PMD-aligned");
+
+ /* Src addr PUD aligned */
+ test_cases[9] = MAKE_TEST(PUD, PTE, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination PTE-aligned");
+ test_cases[10] = MAKE_TEST(PUD, _1MB, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination 1MB-aligned");
+ test_cases[11] = MAKE_TEST(PUD, PMD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination PMD-aligned");
+ test_cases[12] = MAKE_TEST(PUD, PUD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "2GB mremap - Source PUD-aligned, Destination PUD-aligned");
+
+ perf_test_cases[0] = MAKE_TEST(page_size, page_size, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "1GB mremap - Source PTE-aligned, Destination PTE-aligned");
+ /*
+ * mremap 1GB region - Page table level aligned time
+ * comparison.
+ */
+ perf_test_cases[1] = MAKE_TEST(PMD, PMD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "1GB mremap - Source PMD-aligned, Destination PMD-aligned");
+ perf_test_cases[2] = MAKE_TEST(PUD, PUD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS,
+ "1GB mremap - Source PUD-aligned, Destination PUD-aligned");
run_perf_tests = (threshold_mb == VALIDATION_NO_THRESHOLD) ||
(threshold_mb * _1MB >= _1GB);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 2/9] selftest/mremap_test: Avoid crash with static build
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
With a large mmap map size, we can overlap with the text area and using
MAP_FIXED results in unmapping that area. Switch to MAP_FIXED_NOREPLACE
and handle the EEXIST error.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
tools/testing/selftests/vm/mremap_test.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c
index c9a5461eb786..0624d1bd71b5 100644
--- a/tools/testing/selftests/vm/mremap_test.c
+++ b/tools/testing/selftests/vm/mremap_test.c
@@ -75,9 +75,10 @@ static void *get_source_mapping(struct config c)
retry:
addr += c.src_alignment;
src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_ANONYMOUS | MAP_SHARED, -1, 0);
+ MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
+ -1, 0);
if (src_addr == MAP_FAILED) {
- if (errno == EPERM)
+ if (errno == EPERM || errno == EEXIST)
goto retry;
goto error;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* [PATCH v5 2/9] selftest/mremap_test: Avoid crash with static build
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
With a large mmap map size, we can overlap with the text area and using
MAP_FIXED results in unmapping that area. Switch to MAP_FIXED_NOREPLACE
and handle the EEXIST error.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
tools/testing/selftests/vm/mremap_test.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c
index c9a5461eb786..0624d1bd71b5 100644
--- a/tools/testing/selftests/vm/mremap_test.c
+++ b/tools/testing/selftests/vm/mremap_test.c
@@ -75,9 +75,10 @@ static void *get_source_mapping(struct config c)
retry:
addr += c.src_alignment;
src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_ANONYMOUS | MAP_SHARED, -1, 0);
+ MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
+ -1, 0);
if (src_addr == MAP_FAILED) {
- if (errno == EPERM)
+ if (errno == EPERM || errno == EEXIST)
goto retry;
goto error;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
pmd/pud_populate is the right interface to be used to set the respective
page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
can only be used to set a hugepage PTE. Since we are not setting up a hugepage
PTE here, use the pmd/pud_populate interface.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/mremap.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/mm/mremap.c b/mm/mremap.c
index ec8f840399ed..574287f9bb39 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -26,6 +26,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
#include "internal.h"
@@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
pmd_clear(old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
+ pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
- /* Set the new pmd */
- set_pmd_at(mm, new_addr, new_pmd, pmd);
flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
@@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pud_none(*new_pud));
- /* Set the new pud */
- set_pud_at(mm, new_addr, new_pud, pud);
+ pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
pmd/pud_populate is the right interface to be used to set the respective
page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
can only be used to set a hugepage PTE. Since we are not setting up a hugepage
PTE here, use the pmd/pud_populate interface.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/mremap.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/mm/mremap.c b/mm/mremap.c
index ec8f840399ed..574287f9bb39 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -26,6 +26,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
#include "internal.h"
@@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
pmd_clear(old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
+ pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
- /* Set the new pmd */
- set_pmd_at(mm, new_addr, new_pmd, pmd);
flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
@@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pud_none(*new_pud));
- /* Set the new pud */
- set_pud_at(mm, new_addr, new_pud, pud);
+ pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-05-18 20:04 ` Nathan Chancellor
-1 siblings, 0 replies; 106+ messages in thread
From: Nathan Chancellor @ 2021-05-18 20:04 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
[-- Attachment #1: Type: text/plain, Size: 4762 bytes --]
Hi Aneesh,
On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
> pmd/pud_populate is the right interface to be used to set the respective
> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
> PTE here, use the pmd/pud_populate interface.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> mm/mremap.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/mm/mremap.c b/mm/mremap.c
> index ec8f840399ed..574287f9bb39 100644
> --- a/mm/mremap.c
> +++ b/mm/mremap.c
> @@ -26,6 +26,7 @@
>
> #include <asm/cacheflush.h>
> #include <asm/tlbflush.h>
> +#include <asm/pgalloc.h>
>
> #include "internal.h"
>
> @@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> pmd_clear(old_pmd);
>
> VM_BUG_ON(!pmd_none(*new_pmd));
> + pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>
> - /* Set the new pmd */
> - set_pmd_at(mm, new_addr, new_pmd, pmd);
> flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> @@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
>
> VM_BUG_ON(!pud_none(*new_pud));
>
> - /* Set the new pud */
> - set_pud_at(mm, new_addr, new_pud, pud);
> + pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
> flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> --
> 2.30.2
>
>
This commit causes my WSL2 VM to close when compiling something memory
intensive, such as an x86_64_defconfig + CONFIG_LTO_CLANG_FULL=y kernel
or LLVM/Clang. Unfortunately, I do not have much further information to
provide since I do not see any sort of splat in dmesg right before it
closes and I have found zero information about getting the previous
kernel message in WSL2 (custom init so no systemd or anything).
The config file is the stock one from Microsoft:
https://github.com/microsoft/WSL2-Linux-Kernel/blob/a571dc8cedc8e0e56487c0dc93243e0b5db8960a/Microsoft/config-wsl
I have attached my .config anyways, which includes CONFIG_DEBUG_VM,
which does not appear to show anything out of the ordinary. I have also
attached a dmesg just in case anything sticks out. I am happy to provide
any additional information or perform additional debugging steps as
needed.
Cheers,
Nathan
$ git bisect log
# bad: [cd557f1c605fc5a2c0eb0b540610f50dc67dd849] Add linux-next specific files for 20210514
# good: [315d99318179b9cd5077ccc9f7f26a164c9fa998] Merge tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect start 'cd557f1c605fc5a2c0eb0b540610f50dc67dd849' '315d99318179b9cd5077ccc9f7f26a164c9fa998'
# good: [9634d7cb3c506ae886a5136d12b4af696b9cee8a] Merge remote-tracking branch 'drm-misc/for-linux-next'
git bisect good 9634d7cb3c506ae886a5136d12b4af696b9cee8a
# good: [294636a24ae819a7caf0807d05d8eb5b964ec06f] Merge remote-tracking branch 'rcu/rcu/next'
git bisect good 294636a24ae819a7caf0807d05d8eb5b964ec06f
# good: [cb753d0611f912439c8e814f4254d15fa8fa1d75] Merge remote-tracking branch 'gpio-brgl/gpio/for-next'
git bisect good cb753d0611f912439c8e814f4254d15fa8fa1d75
# bad: [b1e7389449084b74a044a70860c6a1c7466781cb] lib/string_helpers: switch to use BIT() macro
git bisect bad b1e7389449084b74a044a70860c6a1c7466781cb
# bad: [bf5570ed0654a21000e5dad9243ea1ba30bfe208] kasan: use dump_stack_lvl(KERN_ERR) to print stacks
git bisect bad bf5570ed0654a21000e5dad9243ea1ba30bfe208
# good: [4a292ff7a819404039588c7a9af272aca22c869e] fixup! mm: gup: pack has_pinned in MMF_HAS_PINNED
git bisect good 4a292ff7a819404039588c7a9af272aca22c869e
# good: [5ed68c90c7fb884c3c493d5529aca79dcf125848] mm: memcontrol: move obj_cgroup_uncharge_pages() out of css_set_lock
git bisect good 5ed68c90c7fb884c3c493d5529aca79dcf125848
# good: [f96ae2c1e63b71134e216e9940df3f2793a9a4b1] mm/memory.c: fix comment of finish_mkwrite_fault()
git bisect good f96ae2c1e63b71134e216e9940df3f2793a9a4b1
# bad: [5b0a28a7f9f5fdc2fe5a5e2cce7ea17b98e5eaeb] mm/mremap: use range flush that does TLB and page walk cache flush
git bisect bad 5b0a28a7f9f5fdc2fe5a5e2cce7ea17b98e5eaeb
# bad: [dbee97d1f49a2f2f1f5c26bf15151cc998572e89] mm/mremap: use pmd/pud_poplulate to update page table entries
git bisect bad dbee97d1f49a2f2f1f5c26bf15151cc998572e89
# good: [c4c8a76d96a7d38d1ec8732e3f852418d18a7424] selftest/mremap_test: avoid crash with static build
git bisect good c4c8a76d96a7d38d1ec8732e3f852418d18a7424
# first bad commit: [dbee97d1f49a2f2f1f5c26bf15151cc998572e89] mm/mremap: use pmd/pud_poplulate to update page table entries
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 91633 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.13.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23601
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23601
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-microsoft-standard-WSL2"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SCHED_CORE=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_ARCH_CPUIDLE_HALTPOLL is not set
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=256
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_TINY_POWER_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=y
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_X86_PM_TIMER is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_X86_X32=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
CONFIG_RESET_ATTACK_MITIGATION=y
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_EFI_EARLYCON=y
# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_XEN is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_MEM_SOFT_DIRTY is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
# CONFIG_DEVICE_PRIVATE is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_ESP=y
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
# CONFIG_NFT_CT is not set
# CONFIG_NFT_COUNTER is not set
# CONFIG_NFT_CONNLIMIT is not set
# CONFIG_NFT_LOG is not set
# CONFIG_NFT_LIMIT is not set
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
# CONFIG_NFT_NAT is not set
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
# CONFIG_NFT_COMPAT is not set
# CONFIG_NFT_HASH is not set
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
# CONFIG_NETFILTER_XT_CONNMARK is not set
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_IPVS=y
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
# CONFIG_IP_SET_LIST_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_MH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
CONFIG_IP_VS_NFCT=y
# CONFIG_IP_VS_PE_SIP is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
CONFIG_NF_TABLES_IPV4=y
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NFT_FIB_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
CONFIG_NF_TABLES_IPV6=y
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NFT_FIB_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_ACT_BPF=y
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_HYPERV_VSOCKETS=y
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_VMD is not set
CONFIG_PCI_HYPERV_INTERFACE=y
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_HYPERV_STORAGE=y
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=y
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_INIT is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_FEC is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
# CONFIG_WIREGUARD_DEBUG is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
# CONFIG_NET_TEAM_MODE_RANDOM is not set
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=y
CONFIG_TAP=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_MICROSOFT_MANA is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
# CONFIG_WWAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=y
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_HYPERV_KEYBOARD=y
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_DEVPORT is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# end of Character devices
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_MADERA is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
# CONFIG_HID is not set
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=y
CONFIG_VFIO_MDEV_DEVICE=y
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_PCI_LEGACY is not set
# CONFIG_VIRTIO_VDPA is not set
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MEM=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VDPA=y
# CONFIG_IFCVF is not set
# CONFIG_VP_VDPA is not set
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST_VDPA=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=y
CONFIG_HYPERV_BALLOON=y
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
# CONFIG_IRQ_REMAP is not set
# CONFIG_HYPERV_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_BLK=y
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_ND_PFN=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_PMEM=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SYSFS is not set
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
CONFIG_FUSE_DAX=y
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_EFIVAR_FS is not set
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CIFS_ROOT is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
CONFIG_CRYPTO_CURVE25519_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_BLAKE2S_X86=y
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CHACHA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_BLAKE2S=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=2
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=1
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_STACK_VALIDATION=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
#
# x86 Debugging
#
# CONFIG_DEBUG_AID_FOR_SYZBOT is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
[-- Attachment #3: dmesg-crash.log --]
[-- Type: text/plain, Size: 20047 bytes --]
[ 0.000000] Linux version 5.13.0-rc1-microsoft-standard-WSL2+ (nathan@Ryzen-9-3900X) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Tue May 18 12:16:05 MST 2021
[ 0.000000] Command line: initrd=\initrd.img panic=-1 pty.legacy_count=0 nr_cpus=24
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000001fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000000200000-0x00000000f7ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000407ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Microsoft Hyper-V
[ 0.000000] Hyper-V: privilege flags low 0xae7f, high 0x3b8030, hints 0xc2c, misc 0x20bed7b2
[ 0.000000] Hyper-V Host Build:19041-10.0-0-0.985
[ 0.000000] Hyper-V: LAPIC Timer Frequency: 0x1e8480
[ 0.000000] Hyper-V: Using hypercall for remote TLB flush
[ 0.000000] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000002] tsc: Detected 3799.998 MHz processor
[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000012] last_pfn = 0x408000 max_arch_pfn = 0x400000000
[ 0.000049] Disabled
[ 0.000049] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000055] CPU MTRRs all blank - virtualized system.
[ 0.000057] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000058] last_pfn = 0xf8000 max_arch_pfn = 0x400000000
[ 0.000068] Using GB pages for direct mapping
[ 0.000144] RAMDISK: [mem 0x03497000-0x034a6fff]
[ 0.000145] ACPI: Early table checksum verification disabled
[ 0.000147] ACPI: RSDP 0x00000000000E0000 000024 (v02 VRTUAL)
[ 0.000159] ACPI: XSDT 0x0000000000100000 000044 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000163] ACPI: FACP 0x0000000000101000 000114 (v06 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000166] ACPI: DSDT 0x00000000001011B8 01E184 (v02 MSFTVM DSDT01 00000001 MSFT 05000000)
[ 0.000168] ACPI: FACS 0x0000000000101114 000040
[ 0.000169] ACPI: OEM0 0x0000000000101154 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000171] ACPI: SRAT 0x000000000011F33C 000390 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000173] ACPI: APIC 0x000000000011F6CC 000108 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000174] ACPI: Reserving FACP table memory at [mem 0x101000-0x101113]
[ 0.000176] ACPI: Reserving DSDT table memory at [mem 0x1011b8-0x11f33b]
[ 0.000176] ACPI: Reserving FACS table memory at [mem 0x101114-0x101153]
[ 0.000177] ACPI: Reserving OEM0 table memory at [mem 0x101154-0x1011b7]
[ 0.000178] ACPI: Reserving SRAT table memory at [mem 0x11f33c-0x11f6cb]
[ 0.000178] ACPI: Reserving APIC table memory at [mem 0x11f6cc-0x11f7d3]
[ 0.000182] ACPI: Local APIC address 0xfee00000
[ 0.049600] Zone ranges:
[ 0.049603] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.049605] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.049606] Normal [mem 0x0000000100000000-0x0000000407ffffff]
[ 0.049607] Device empty
[ 0.049608] Movable zone start for each node
[ 0.049608] Early memory node ranges
[ 0.049609] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.049610] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.049611] node 0: [mem 0x0000000100000000-0x0000000407ffffff]
[ 0.049613] Initmem setup node 0 [mem 0x0000000000001000-0x0000000407ffffff]
[ 0.049614] On node 0 totalpages: 4193951
[ 0.049615] DMA zone: 59 pages used for memmap
[ 0.049616] DMA zone: 22 pages reserved
[ 0.049617] DMA zone: 3743 pages, LIFO batch:0
[ 0.049783] DMA zone: 29025 pages in unavailable ranges
[ 0.049785] DMA32 zone: 16320 pages used for memmap
[ 0.049785] DMA32 zone: 1011712 pages, LIFO batch:63
[ 0.054414] Normal zone: 49664 pages used for memmap
[ 0.054419] Normal zone: 3178496 pages, LIFO batch:63
[ 0.054618] ACPI: Local APIC address 0xfee00000
[ 0.054623] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.054940] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[ 0.054944] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.054947] ACPI: IRQ9 used by override.
[ 0.054948] Using ACPI (MADT) for SMP configuration information
[ 0.054954] smpboot: Allowing 24 CPUs, 0 hotplug CPUs
[ 0.054961] [mem 0xf8000000-0xffffffff] available for PCI devices
[ 0.054963] Booting paravirtualized kernel on Hyper-V
[ 0.054964] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.058977] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_node_ids:1
[ 0.060468] percpu: Embedded 52 pages/cpu s175768 r8192 d29032 u262144
[ 0.060473] pcpu-alloc: s175768 r8192 d29032 u262144 alloc=1*2097152
[ 0.060475] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.060481] pcpu-alloc: [0] 16 17 18 19 20 21 22 23
[ 0.060494] Built 1 zonelists, mobility grouping on. Total pages: 4127886
[ 0.060495] Kernel command line: initrd=\initrd.img panic=-1 pty.legacy_count=0 nr_cpus=24
[ 0.060534] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.060536] printk: log_buf_len total cpu_extra contributions: 94208 bytes
[ 0.060536] printk: log_buf_len min size: 131072 bytes
[ 0.060648] printk: log_buf_len: 262144 bytes
[ 0.060648] printk: early log buf free: 125200(95%)
[ 0.063680] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.065113] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.065174] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.083600] Memory: 4126944K/16775804K available (16404K kernel code, 2497K rwdata, 3536K rodata, 1572K init, 2888K bss, 394252K reserved, 0K cma-reserved)
[ 0.083649] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[ 0.083657] ftrace: allocating 48648 entries in 191 pages
[ 0.094520] ftrace: allocated 191 pages with 7 groups
[ 0.094835] rcu: Hierarchical RCU implementation.
[ 0.094836] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=24.
[ 0.094837] Rude variant of Tasks RCU enabled.
[ 0.094838] Tracing variant of Tasks RCU enabled.
[ 0.094838] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.094839] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[ 0.097699] Using NULL legacy PIC
[ 0.097700] NR_IRQS: 16640, nr_irqs: 616, preallocated irqs: 0
[ 0.098048] random: crng done (trusting CPU's manufacturer)
[ 0.098318] Console: colour dummy device 80x25
[ 0.098324] printk: console [tty0] enabled
[ 0.098329] ACPI: Core revision 20210331
[ 0.098412] Failed to register legacy timer interrupt
[ 0.098412] APIC: Switch to symmetric I/O mode setup
[ 0.098413] Switched APIC routing to physical flat.
[ 0.098425] Hyper-V: Using IPI hypercalls
[ 0.098426] Hyper-V: Using enlightened APIC (xapic mode)
[ 0.098510] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8cab05ec1, max_idle_ns: 881590646801 ns
[ 0.098514] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.99 BogoMIPS (lpj=37999980)
[ 0.098516] pid_max: default: 32768 minimum: 301
[ 0.098526] LSM: Security Framework initializing
[ 0.098546] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.098562] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.098754] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.098771] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.098772] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.098774] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.098775] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.098776] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.098777] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.098777] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.098778] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.099523] Freeing SMP alternatives memory: 52K
[ 0.099568] smpboot: CPU0: AMD Ryzen 9 3900X 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.099621] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.099720] rcu: Hierarchical SRCU implementation.
[ 0.100063] smp: Bringing up secondary CPUs ...
[ 0.100109] x86: Booting SMP configuration:
[ 0.100110] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
[ 0.109045] smp: Brought up 1 node, 24 CPUs
[ 0.109045] smpboot: Max logical packages: 1
[ 0.109045] smpboot: Total of 24 processors activated (182399.90 BogoMIPS)
[ 0.119506] node 0 deferred pages initialised in 10ms
[ 0.120913] devtmpfs: initialized
[ 0.120913] x86/mm: Memory block size: 128MB
[ 0.120913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.120913] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.120913] NET: Registered protocol family 16
[ 0.120913] thermal_sys: Registered thermal governor 'step_wise'
[ 0.120913] thermal_sys: Registered thermal governor 'user_space'
[ 0.120913] cpuidle: using governor menu
[ 0.121480] ACPI: bus type PCI registered
[ 0.121480] PCI: Fatal: No config space access function found
[ 0.121480] Kprobes globally optimized
[ 0.121480] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.121480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.128551] raid6: skip pq benchmark and using algorithm avx2x4
[ 0.128551] raid6: using avx2x2 recovery algorithm
[ 0.128551] ACPI: Added _OSI(Module Device)
[ 0.128551] ACPI: Added _OSI(Processor Device)
[ 0.128551] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128551] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128551] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.128551] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.128551] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.131723] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.132429] ACPI: Interpreter enabled
[ 0.132433] ACPI: (supports S0 S5)
[ 0.132433] ACPI: Using IOAPIC for interrupt routing
[ 0.132439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.132569] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 0.133352] iommu: Default domain type: Translated
[ 0.133398] SCSI subsystem initialized
[ 0.138523] hv_vmbus: Vmbus version:5.2
[ 0.138638] PCI: Using ACPI for IRQ routing
[ 0.138559] hv_vmbus: Unknown GUID: c376c1c3-d276-48d2-90a9-c04748072c60
[ 0.138640] PCI: System does not support PCI
[ 0.138907] clocksource: Switched to clocksource tsc-early
[ 0.145735] VFS: Disk quotas dquot_6.6.0
[ 0.145747] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.145761] FS-Cache: Loaded
[ 0.145782] pnp: PnP ACPI init
[ 0.145818] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.145867] pnp: PnP ACPI: found 1 devices
[ 0.149396] NET: Registered protocol family 2
[ 0.149862] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.150734] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.150748] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.151196] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.151274] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.151301] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.151586] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.151637] NET: Registered protocol family 1
[ 0.151945] RPC: Registered named UNIX socket transport module.
[ 0.151947] RPC: Registered udp transport module.
[ 0.151947] RPC: Registered tcp transport module.
[ 0.151948] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.151950] PCI: CLS 0 bytes, default 64
[ 0.151966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.151967] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB)
[ 0.151994] Trying to unpack rootfs image as initramfs...
[ 0.152118] Freeing initrd memory: 64K
[ 0.232213] kvm: no hardware support
[ 0.232215] has_svm: svm not available
[ 0.232215] kvm: no hardware support
[ 0.234795] Initialise system trusted keyrings
[ 0.234885] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.235466] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.235605] NFS: Registering the id_resolver key type
[ 0.235610] Key type id_resolver registered
[ 0.235610] Key type id_legacy registered
[ 0.235612] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.236409] Key type cifs.idmap registered
[ 0.236464] fuse: init (API version 7.33)
[ 0.236579] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 0.236843] 9p: Installing v9fs 9p2000 file system support
[ 0.236850] FS-Cache: Netfs '9p' registered for caching
[ 0.236879] FS-Cache: Netfs 'ceph' registered for caching
[ 0.236881] ceph: loaded (mds proto 32)
[ 0.239345] NET: Registered protocol family 38
[ 0.239347] xor: automatically using best checksumming function avx
[ 0.239348] Key type asymmetric registered
[ 0.239349] Asymmetric key parser 'x509' registered
[ 0.239354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.240227] hv_vmbus: registering driver hv_pci
[ 0.240727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.241241] Non-volatile memory driver v1.3
[ 0.244524] brd: module loaded
[ 0.245390] loop: module loaded
[ 0.245421] hv_vmbus: registering driver hv_storvsc
[ 0.246024] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 0.246026] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 0.246039] tun: Universal TUN/TAP device driver, 1.6
[ 0.246124] PPP generic driver version 2.4.2
[ 0.246270] PPP BSD Compression module registered
[ 0.246275] PPP Deflate Compression module registered
[ 0.246279] PPP MPPE Compression module registered
[ 0.246280] NET: Registered protocol family 24
[ 0.246317] hv_vmbus: registering driver hv_netvsc
[ 0.246730] scsi host0: storvsc_host_t
[ 0.258773] VFIO - User Level meta-driver version: 0.3
[ 0.258895] hv_vmbus: registering driver hyperv_keyboard
[ 0.259043] rtc_cmos 00:00: RTC can wake from S4
[ 0.260640] rtc_cmos 00:00: registered as rtc0
[ 0.261044] rtc_cmos 00:00: setting system clock to 2021-05-18T19:20:22 UTC (1621365622)
[ 0.261055] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 0.261234] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.261342] device-mapper: raid: Loading target version 1.15.1
[ 0.261403] hv_utils: Registering HyperV Utility Driver
[ 0.261404] hv_vmbus: registering driver hv_utils
[ 0.261426] hv_vmbus: registering driver hv_balloon
[ 0.261429] hv_utils: cannot register PTP clock: 0
[ 0.261463] drop_monitor: Initializing network drop monitor service
[ 0.261974] hv_utils: TimeSync IC version 4.0
[ 0.262457] hv_balloon: Using Dynamic Memory protocol version 2.0
[ 0.263097] Free page reporting enabled
[ 0.263098] hv_balloon: Cold memory discard hint enabled
[ 0.265633] Mirror/redirect action on
[ 0.266039] IPVS: Registered protocols (TCP, UDP)
[ 0.266057] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 0.266080] IPVS: ipvs loaded.
[ 0.266080] IPVS: [rr] scheduler registered.
[ 0.266081] IPVS: [wrr] scheduler registered.
[ 0.266081] IPVS: [sh] scheduler registered.
[ 0.266107] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 0.267690] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 0.268207] Initializing XFRM netlink socket
[ 0.268245] NET: Registered protocol family 10
[ 0.268596] Segment Routing with IPv6
[ 0.270163] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.270219] NET: Registered protocol family 17
[ 0.270232] Bridge firewalling registered
[ 0.270237] 8021q: 802.1Q VLAN Support v1.8
[ 0.270250] sctp: Hash tables configured (bind 256/256)
[ 0.270299] 9pnet: Installing 9P2000 support
[ 0.270311] Key type dns_resolver registered
[ 0.270319] Key type ceph registered
[ 0.270422] libceph: loaded (mon/osd proto 15/24)
[ 0.270481] NET: Registered protocol family 40
[ 0.270483] hv_vmbus: registering driver hv_sock
[ 0.270505] IPI shorthand broadcast: enabled
[ 0.270512] sched_clock: Marking stable (269918173, 553000)->(275169600, -4698427)
[ 0.271011] registered taskstats version 1
[ 0.271018] Loading compiled-in X.509 certificates
[ 0.271019] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 0.271183] Btrfs loaded, crc32c=crc32c-generic, zoned=no
[ 0.272097] Freeing unused kernel image (initmem) memory: 1572K
[ 0.338572] Write protecting the kernel read-only data: 22528k
[ 0.339327] Freeing unused kernel image (text/rodata gap) memory: 2024K
[ 0.339642] Freeing unused kernel image (rodata/data gap) memory: 560K
[ 0.339647] Run /init as init process
[ 0.339648] with arguments:
[ 0.339648] /init
[ 0.339648] with environment:
[ 0.339649] HOME=/
[ 0.339649] TERM=linux
[ 0.354936] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
[ 0.355318] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.356306] sd 0:0:0:0: [sda] 536870912 512-byte logical blocks: (275 GB/256 GiB)
[ 0.356309] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.356387] sd 0:0:0:0: [sda] Write Protect is off
[ 0.356390] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 0.356579] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.678840] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.288538] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cab05ec1, max_idle_ns: 881590646801 ns
[ 1.288577] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1.289309] clocksource: Switched to clocksource tsc
[ 2.536366] EXT4-fs (sda): recovery complete
[ 2.536995] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none.
[ 49.103072] hv_balloon: Max. dynamic memory size: 16384 MB
[ 181.345901] WSL2: Performing memory compaction.
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-18 20:04 ` Nathan Chancellor
0 siblings, 0 replies; 106+ messages in thread
From: Nathan Chancellor @ 2021-05-18 20:04 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 4762 bytes --]
Hi Aneesh,
On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
> pmd/pud_populate is the right interface to be used to set the respective
> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
> PTE here, use the pmd/pud_populate interface.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> mm/mremap.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/mm/mremap.c b/mm/mremap.c
> index ec8f840399ed..574287f9bb39 100644
> --- a/mm/mremap.c
> +++ b/mm/mremap.c
> @@ -26,6 +26,7 @@
>
> #include <asm/cacheflush.h>
> #include <asm/tlbflush.h>
> +#include <asm/pgalloc.h>
>
> #include "internal.h"
>
> @@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> pmd_clear(old_pmd);
>
> VM_BUG_ON(!pmd_none(*new_pmd));
> + pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>
> - /* Set the new pmd */
> - set_pmd_at(mm, new_addr, new_pmd, pmd);
> flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> @@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
>
> VM_BUG_ON(!pud_none(*new_pud));
>
> - /* Set the new pud */
> - set_pud_at(mm, new_addr, new_pud, pud);
> + pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
> flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> --
> 2.30.2
>
>
This commit causes my WSL2 VM to close when compiling something memory
intensive, such as an x86_64_defconfig + CONFIG_LTO_CLANG_FULL=y kernel
or LLVM/Clang. Unfortunately, I do not have much further information to
provide since I do not see any sort of splat in dmesg right before it
closes and I have found zero information about getting the previous
kernel message in WSL2 (custom init so no systemd or anything).
The config file is the stock one from Microsoft:
https://github.com/microsoft/WSL2-Linux-Kernel/blob/a571dc8cedc8e0e56487c0dc93243e0b5db8960a/Microsoft/config-wsl
I have attached my .config anyways, which includes CONFIG_DEBUG_VM,
which does not appear to show anything out of the ordinary. I have also
attached a dmesg just in case anything sticks out. I am happy to provide
any additional information or perform additional debugging steps as
needed.
Cheers,
Nathan
$ git bisect log
# bad: [cd557f1c605fc5a2c0eb0b540610f50dc67dd849] Add linux-next specific files for 20210514
# good: [315d99318179b9cd5077ccc9f7f26a164c9fa998] Merge tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect start 'cd557f1c605fc5a2c0eb0b540610f50dc67dd849' '315d99318179b9cd5077ccc9f7f26a164c9fa998'
# good: [9634d7cb3c506ae886a5136d12b4af696b9cee8a] Merge remote-tracking branch 'drm-misc/for-linux-next'
git bisect good 9634d7cb3c506ae886a5136d12b4af696b9cee8a
# good: [294636a24ae819a7caf0807d05d8eb5b964ec06f] Merge remote-tracking branch 'rcu/rcu/next'
git bisect good 294636a24ae819a7caf0807d05d8eb5b964ec06f
# good: [cb753d0611f912439c8e814f4254d15fa8fa1d75] Merge remote-tracking branch 'gpio-brgl/gpio/for-next'
git bisect good cb753d0611f912439c8e814f4254d15fa8fa1d75
# bad: [b1e7389449084b74a044a70860c6a1c7466781cb] lib/string_helpers: switch to use BIT() macro
git bisect bad b1e7389449084b74a044a70860c6a1c7466781cb
# bad: [bf5570ed0654a21000e5dad9243ea1ba30bfe208] kasan: use dump_stack_lvl(KERN_ERR) to print stacks
git bisect bad bf5570ed0654a21000e5dad9243ea1ba30bfe208
# good: [4a292ff7a819404039588c7a9af272aca22c869e] fixup! mm: gup: pack has_pinned in MMF_HAS_PINNED
git bisect good 4a292ff7a819404039588c7a9af272aca22c869e
# good: [5ed68c90c7fb884c3c493d5529aca79dcf125848] mm: memcontrol: move obj_cgroup_uncharge_pages() out of css_set_lock
git bisect good 5ed68c90c7fb884c3c493d5529aca79dcf125848
# good: [f96ae2c1e63b71134e216e9940df3f2793a9a4b1] mm/memory.c: fix comment of finish_mkwrite_fault()
git bisect good f96ae2c1e63b71134e216e9940df3f2793a9a4b1
# bad: [5b0a28a7f9f5fdc2fe5a5e2cce7ea17b98e5eaeb] mm/mremap: use range flush that does TLB and page walk cache flush
git bisect bad 5b0a28a7f9f5fdc2fe5a5e2cce7ea17b98e5eaeb
# bad: [dbee97d1f49a2f2f1f5c26bf15151cc998572e89] mm/mremap: use pmd/pud_poplulate to update page table entries
git bisect bad dbee97d1f49a2f2f1f5c26bf15151cc998572e89
# good: [c4c8a76d96a7d38d1ec8732e3f852418d18a7424] selftest/mremap_test: avoid crash with static build
git bisect good c4c8a76d96a7d38d1ec8732e3f852418d18a7424
# first bad commit: [dbee97d1f49a2f2f1f5c26bf15151cc998572e89] mm/mremap: use pmd/pud_poplulate to update page table entries
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 91633 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.13.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23601
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23601
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-microsoft-standard-WSL2"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SCHED_CORE=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_ARCH_CPUIDLE_HALTPOLL is not set
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=256
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_TINY_POWER_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=y
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_X86_PM_TIMER is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_X86_X32=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
CONFIG_RESET_ATTACK_MITIGATION=y
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_EFI_EARLYCON=y
# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_XEN is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_MEM_SOFT_DIRTY is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
# CONFIG_DEVICE_PRIVATE is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_ESP=y
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
# CONFIG_NFT_CT is not set
# CONFIG_NFT_COUNTER is not set
# CONFIG_NFT_CONNLIMIT is not set
# CONFIG_NFT_LOG is not set
# CONFIG_NFT_LIMIT is not set
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
# CONFIG_NFT_NAT is not set
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
# CONFIG_NFT_COMPAT is not set
# CONFIG_NFT_HASH is not set
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
# CONFIG_NETFILTER_XT_CONNMARK is not set
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_IPVS=y
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
# CONFIG_IP_SET_LIST_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_MH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
CONFIG_IP_VS_NFCT=y
# CONFIG_IP_VS_PE_SIP is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
CONFIG_NF_TABLES_IPV4=y
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NFT_FIB_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
CONFIG_NF_TABLES_IPV6=y
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NFT_FIB_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_ACT_BPF=y
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_HYPERV_VSOCKETS=y
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_VMD is not set
CONFIG_PCI_HYPERV_INTERFACE=y
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_HYPERV_STORAGE=y
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=y
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_INIT is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_FEC is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
# CONFIG_WIREGUARD_DEBUG is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
# CONFIG_NET_TEAM_MODE_RANDOM is not set
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=y
CONFIG_TAP=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_MICROSOFT_MANA is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
# CONFIG_WWAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=y
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_HYPERV_KEYBOARD=y
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_DEVPORT is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# end of Character devices
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_MADERA is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
# CONFIG_HID is not set
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=y
CONFIG_VFIO_MDEV_DEVICE=y
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_PCI_LEGACY is not set
# CONFIG_VIRTIO_VDPA is not set
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MEM=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VDPA=y
# CONFIG_IFCVF is not set
# CONFIG_VP_VDPA is not set
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST_VDPA=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=y
CONFIG_HYPERV_BALLOON=y
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
# CONFIG_IRQ_REMAP is not set
# CONFIG_HYPERV_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_BLK=y
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_ND_PFN=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_PMEM=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SYSFS is not set
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
CONFIG_FUSE_DAX=y
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_EFIVAR_FS is not set
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CIFS_ROOT is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
CONFIG_CRYPTO_CURVE25519_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_BLAKE2S_X86=y
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CHACHA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_BLAKE2S=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=2
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=1
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_STACK_VALIDATION=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
#
# x86 Debugging
#
# CONFIG_DEBUG_AID_FOR_SYZBOT is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
[-- Attachment #3: dmesg-crash.log --]
[-- Type: text/plain, Size: 20047 bytes --]
[ 0.000000] Linux version 5.13.0-rc1-microsoft-standard-WSL2+ (nathan@Ryzen-9-3900X) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Tue May 18 12:16:05 MST 2021
[ 0.000000] Command line: initrd=\initrd.img panic=-1 pty.legacy_count=0 nr_cpus=24
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000001fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000000200000-0x00000000f7ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000407ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Microsoft Hyper-V
[ 0.000000] Hyper-V: privilege flags low 0xae7f, high 0x3b8030, hints 0xc2c, misc 0x20bed7b2
[ 0.000000] Hyper-V Host Build:19041-10.0-0-0.985
[ 0.000000] Hyper-V: LAPIC Timer Frequency: 0x1e8480
[ 0.000000] Hyper-V: Using hypercall for remote TLB flush
[ 0.000000] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000002] tsc: Detected 3799.998 MHz processor
[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000012] last_pfn = 0x408000 max_arch_pfn = 0x400000000
[ 0.000049] Disabled
[ 0.000049] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000055] CPU MTRRs all blank - virtualized system.
[ 0.000057] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000058] last_pfn = 0xf8000 max_arch_pfn = 0x400000000
[ 0.000068] Using GB pages for direct mapping
[ 0.000144] RAMDISK: [mem 0x03497000-0x034a6fff]
[ 0.000145] ACPI: Early table checksum verification disabled
[ 0.000147] ACPI: RSDP 0x00000000000E0000 000024 (v02 VRTUAL)
[ 0.000159] ACPI: XSDT 0x0000000000100000 000044 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000163] ACPI: FACP 0x0000000000101000 000114 (v06 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000166] ACPI: DSDT 0x00000000001011B8 01E184 (v02 MSFTVM DSDT01 00000001 MSFT 05000000)
[ 0.000168] ACPI: FACS 0x0000000000101114 000040
[ 0.000169] ACPI: OEM0 0x0000000000101154 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000171] ACPI: SRAT 0x000000000011F33C 000390 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000173] ACPI: APIC 0x000000000011F6CC 000108 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000174] ACPI: Reserving FACP table memory at [mem 0x101000-0x101113]
[ 0.000176] ACPI: Reserving DSDT table memory at [mem 0x1011b8-0x11f33b]
[ 0.000176] ACPI: Reserving FACS table memory at [mem 0x101114-0x101153]
[ 0.000177] ACPI: Reserving OEM0 table memory at [mem 0x101154-0x1011b7]
[ 0.000178] ACPI: Reserving SRAT table memory at [mem 0x11f33c-0x11f6cb]
[ 0.000178] ACPI: Reserving APIC table memory at [mem 0x11f6cc-0x11f7d3]
[ 0.000182] ACPI: Local APIC address 0xfee00000
[ 0.049600] Zone ranges:
[ 0.049603] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.049605] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.049606] Normal [mem 0x0000000100000000-0x0000000407ffffff]
[ 0.049607] Device empty
[ 0.049608] Movable zone start for each node
[ 0.049608] Early memory node ranges
[ 0.049609] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.049610] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.049611] node 0: [mem 0x0000000100000000-0x0000000407ffffff]
[ 0.049613] Initmem setup node 0 [mem 0x0000000000001000-0x0000000407ffffff]
[ 0.049614] On node 0 totalpages: 4193951
[ 0.049615] DMA zone: 59 pages used for memmap
[ 0.049616] DMA zone: 22 pages reserved
[ 0.049617] DMA zone: 3743 pages, LIFO batch:0
[ 0.049783] DMA zone: 29025 pages in unavailable ranges
[ 0.049785] DMA32 zone: 16320 pages used for memmap
[ 0.049785] DMA32 zone: 1011712 pages, LIFO batch:63
[ 0.054414] Normal zone: 49664 pages used for memmap
[ 0.054419] Normal zone: 3178496 pages, LIFO batch:63
[ 0.054618] ACPI: Local APIC address 0xfee00000
[ 0.054623] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.054940] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[ 0.054944] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.054947] ACPI: IRQ9 used by override.
[ 0.054948] Using ACPI (MADT) for SMP configuration information
[ 0.054954] smpboot: Allowing 24 CPUs, 0 hotplug CPUs
[ 0.054961] [mem 0xf8000000-0xffffffff] available for PCI devices
[ 0.054963] Booting paravirtualized kernel on Hyper-V
[ 0.054964] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.058977] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_node_ids:1
[ 0.060468] percpu: Embedded 52 pages/cpu s175768 r8192 d29032 u262144
[ 0.060473] pcpu-alloc: s175768 r8192 d29032 u262144 alloc=1*2097152
[ 0.060475] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.060481] pcpu-alloc: [0] 16 17 18 19 20 21 22 23
[ 0.060494] Built 1 zonelists, mobility grouping on. Total pages: 4127886
[ 0.060495] Kernel command line: initrd=\initrd.img panic=-1 pty.legacy_count=0 nr_cpus=24
[ 0.060534] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.060536] printk: log_buf_len total cpu_extra contributions: 94208 bytes
[ 0.060536] printk: log_buf_len min size: 131072 bytes
[ 0.060648] printk: log_buf_len: 262144 bytes
[ 0.060648] printk: early log buf free: 125200(95%)
[ 0.063680] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.065113] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.065174] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.083600] Memory: 4126944K/16775804K available (16404K kernel code, 2497K rwdata, 3536K rodata, 1572K init, 2888K bss, 394252K reserved, 0K cma-reserved)
[ 0.083649] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[ 0.083657] ftrace: allocating 48648 entries in 191 pages
[ 0.094520] ftrace: allocated 191 pages with 7 groups
[ 0.094835] rcu: Hierarchical RCU implementation.
[ 0.094836] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=24.
[ 0.094837] Rude variant of Tasks RCU enabled.
[ 0.094838] Tracing variant of Tasks RCU enabled.
[ 0.094838] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.094839] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[ 0.097699] Using NULL legacy PIC
[ 0.097700] NR_IRQS: 16640, nr_irqs: 616, preallocated irqs: 0
[ 0.098048] random: crng done (trusting CPU's manufacturer)
[ 0.098318] Console: colour dummy device 80x25
[ 0.098324] printk: console [tty0] enabled
[ 0.098329] ACPI: Core revision 20210331
[ 0.098412] Failed to register legacy timer interrupt
[ 0.098412] APIC: Switch to symmetric I/O mode setup
[ 0.098413] Switched APIC routing to physical flat.
[ 0.098425] Hyper-V: Using IPI hypercalls
[ 0.098426] Hyper-V: Using enlightened APIC (xapic mode)
[ 0.098510] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8cab05ec1, max_idle_ns: 881590646801 ns
[ 0.098514] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.99 BogoMIPS (lpj=37999980)
[ 0.098516] pid_max: default: 32768 minimum: 301
[ 0.098526] LSM: Security Framework initializing
[ 0.098546] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.098562] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.098754] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.098771] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.098772] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.098774] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.098775] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.098776] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.098777] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.098777] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.098778] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.099523] Freeing SMP alternatives memory: 52K
[ 0.099568] smpboot: CPU0: AMD Ryzen 9 3900X 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.099621] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.099720] rcu: Hierarchical SRCU implementation.
[ 0.100063] smp: Bringing up secondary CPUs ...
[ 0.100109] x86: Booting SMP configuration:
[ 0.100110] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
[ 0.109045] smp: Brought up 1 node, 24 CPUs
[ 0.109045] smpboot: Max logical packages: 1
[ 0.109045] smpboot: Total of 24 processors activated (182399.90 BogoMIPS)
[ 0.119506] node 0 deferred pages initialised in 10ms
[ 0.120913] devtmpfs: initialized
[ 0.120913] x86/mm: Memory block size: 128MB
[ 0.120913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.120913] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.120913] NET: Registered protocol family 16
[ 0.120913] thermal_sys: Registered thermal governor 'step_wise'
[ 0.120913] thermal_sys: Registered thermal governor 'user_space'
[ 0.120913] cpuidle: using governor menu
[ 0.121480] ACPI: bus type PCI registered
[ 0.121480] PCI: Fatal: No config space access function found
[ 0.121480] Kprobes globally optimized
[ 0.121480] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.121480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.128551] raid6: skip pq benchmark and using algorithm avx2x4
[ 0.128551] raid6: using avx2x2 recovery algorithm
[ 0.128551] ACPI: Added _OSI(Module Device)
[ 0.128551] ACPI: Added _OSI(Processor Device)
[ 0.128551] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128551] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128551] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.128551] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.128551] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.131723] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.132429] ACPI: Interpreter enabled
[ 0.132433] ACPI: (supports S0 S5)
[ 0.132433] ACPI: Using IOAPIC for interrupt routing
[ 0.132439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.132569] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 0.133352] iommu: Default domain type: Translated
[ 0.133398] SCSI subsystem initialized
[ 0.138523] hv_vmbus: Vmbus version:5.2
[ 0.138638] PCI: Using ACPI for IRQ routing
[ 0.138559] hv_vmbus: Unknown GUID: c376c1c3-d276-48d2-90a9-c04748072c60
[ 0.138640] PCI: System does not support PCI
[ 0.138907] clocksource: Switched to clocksource tsc-early
[ 0.145735] VFS: Disk quotas dquot_6.6.0
[ 0.145747] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.145761] FS-Cache: Loaded
[ 0.145782] pnp: PnP ACPI init
[ 0.145818] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.145867] pnp: PnP ACPI: found 1 devices
[ 0.149396] NET: Registered protocol family 2
[ 0.149862] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.150734] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.150748] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.151196] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.151274] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.151301] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.151586] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.151637] NET: Registered protocol family 1
[ 0.151945] RPC: Registered named UNIX socket transport module.
[ 0.151947] RPC: Registered udp transport module.
[ 0.151947] RPC: Registered tcp transport module.
[ 0.151948] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.151950] PCI: CLS 0 bytes, default 64
[ 0.151966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.151967] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB)
[ 0.151994] Trying to unpack rootfs image as initramfs...
[ 0.152118] Freeing initrd memory: 64K
[ 0.232213] kvm: no hardware support
[ 0.232215] has_svm: svm not available
[ 0.232215] kvm: no hardware support
[ 0.234795] Initialise system trusted keyrings
[ 0.234885] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.235466] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.235605] NFS: Registering the id_resolver key type
[ 0.235610] Key type id_resolver registered
[ 0.235610] Key type id_legacy registered
[ 0.235612] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.236409] Key type cifs.idmap registered
[ 0.236464] fuse: init (API version 7.33)
[ 0.236579] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 0.236843] 9p: Installing v9fs 9p2000 file system support
[ 0.236850] FS-Cache: Netfs '9p' registered for caching
[ 0.236879] FS-Cache: Netfs 'ceph' registered for caching
[ 0.236881] ceph: loaded (mds proto 32)
[ 0.239345] NET: Registered protocol family 38
[ 0.239347] xor: automatically using best checksumming function avx
[ 0.239348] Key type asymmetric registered
[ 0.239349] Asymmetric key parser 'x509' registered
[ 0.239354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.240227] hv_vmbus: registering driver hv_pci
[ 0.240727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.241241] Non-volatile memory driver v1.3
[ 0.244524] brd: module loaded
[ 0.245390] loop: module loaded
[ 0.245421] hv_vmbus: registering driver hv_storvsc
[ 0.246024] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 0.246026] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 0.246039] tun: Universal TUN/TAP device driver, 1.6
[ 0.246124] PPP generic driver version 2.4.2
[ 0.246270] PPP BSD Compression module registered
[ 0.246275] PPP Deflate Compression module registered
[ 0.246279] PPP MPPE Compression module registered
[ 0.246280] NET: Registered protocol family 24
[ 0.246317] hv_vmbus: registering driver hv_netvsc
[ 0.246730] scsi host0: storvsc_host_t
[ 0.258773] VFIO - User Level meta-driver version: 0.3
[ 0.258895] hv_vmbus: registering driver hyperv_keyboard
[ 0.259043] rtc_cmos 00:00: RTC can wake from S4
[ 0.260640] rtc_cmos 00:00: registered as rtc0
[ 0.261044] rtc_cmos 00:00: setting system clock to 2021-05-18T19:20:22 UTC (1621365622)
[ 0.261055] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 0.261234] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.261342] device-mapper: raid: Loading target version 1.15.1
[ 0.261403] hv_utils: Registering HyperV Utility Driver
[ 0.261404] hv_vmbus: registering driver hv_utils
[ 0.261426] hv_vmbus: registering driver hv_balloon
[ 0.261429] hv_utils: cannot register PTP clock: 0
[ 0.261463] drop_monitor: Initializing network drop monitor service
[ 0.261974] hv_utils: TimeSync IC version 4.0
[ 0.262457] hv_balloon: Using Dynamic Memory protocol version 2.0
[ 0.263097] Free page reporting enabled
[ 0.263098] hv_balloon: Cold memory discard hint enabled
[ 0.265633] Mirror/redirect action on
[ 0.266039] IPVS: Registered protocols (TCP, UDP)
[ 0.266057] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 0.266080] IPVS: ipvs loaded.
[ 0.266080] IPVS: [rr] scheduler registered.
[ 0.266081] IPVS: [wrr] scheduler registered.
[ 0.266081] IPVS: [sh] scheduler registered.
[ 0.266107] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 0.267690] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 0.268207] Initializing XFRM netlink socket
[ 0.268245] NET: Registered protocol family 10
[ 0.268596] Segment Routing with IPv6
[ 0.270163] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.270219] NET: Registered protocol family 17
[ 0.270232] Bridge firewalling registered
[ 0.270237] 8021q: 802.1Q VLAN Support v1.8
[ 0.270250] sctp: Hash tables configured (bind 256/256)
[ 0.270299] 9pnet: Installing 9P2000 support
[ 0.270311] Key type dns_resolver registered
[ 0.270319] Key type ceph registered
[ 0.270422] libceph: loaded (mon/osd proto 15/24)
[ 0.270481] NET: Registered protocol family 40
[ 0.270483] hv_vmbus: registering driver hv_sock
[ 0.270505] IPI shorthand broadcast: enabled
[ 0.270512] sched_clock: Marking stable (269918173, 553000)->(275169600, -4698427)
[ 0.271011] registered taskstats version 1
[ 0.271018] Loading compiled-in X.509 certificates
[ 0.271019] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 0.271183] Btrfs loaded, crc32c=crc32c-generic, zoned=no
[ 0.272097] Freeing unused kernel image (initmem) memory: 1572K
[ 0.338572] Write protecting the kernel read-only data: 22528k
[ 0.339327] Freeing unused kernel image (text/rodata gap) memory: 2024K
[ 0.339642] Freeing unused kernel image (rodata/data gap) memory: 560K
[ 0.339647] Run /init as init process
[ 0.339648] with arguments:
[ 0.339648] /init
[ 0.339648] with environment:
[ 0.339649] HOME=/
[ 0.339649] TERM=linux
[ 0.354936] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
[ 0.355318] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.356306] sd 0:0:0:0: [sda] 536870912 512-byte logical blocks: (275 GB/256 GiB)
[ 0.356309] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.356387] sd 0:0:0:0: [sda] Write Protect is off
[ 0.356390] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 0.356579] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.678840] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.288538] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cab05ec1, max_idle_ns: 881590646801 ns
[ 1.288577] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1.289309] clocksource: Switched to clocksource tsc
[ 2.536366] EXT4-fs (sda): recovery complete
[ 2.536995] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none.
[ 49.103072] hv_balloon: Max. dynamic memory size: 16384 MB
[ 181.345901] WSL2: Performing memory compaction.
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-18 20:04 ` Nathan Chancellor
@ 2021-05-19 4:46 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-19 4:46 UTC (permalink / raw)
To: Nathan Chancellor
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
Nathan Chancellor <nathan@kernel.org> writes:
> Hi Aneesh,
>
> On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
>> pmd/pud_populate is the right interface to be used to set the respective
>> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
>> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
>> PTE here, use the pmd/pud_populate interface.
>>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>> ---
>> mm/mremap.c | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/mm/mremap.c b/mm/mremap.c
>> index ec8f840399ed..574287f9bb39 100644
>> --- a/mm/mremap.c
>> +++ b/mm/mremap.c
>> @@ -26,6 +26,7 @@
>>
>> #include <asm/cacheflush.h>
>> #include <asm/tlbflush.h>
>> +#include <asm/pgalloc.h>
>>
>> #include "internal.h"
>>
>> @@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
>> pmd_clear(old_pmd);
>>
>> VM_BUG_ON(!pmd_none(*new_pmd));
>> + pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>>
>> - /* Set the new pmd */
>> - set_pmd_at(mm, new_addr, new_pmd, pmd);
>> flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> @@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
>>
>> VM_BUG_ON(!pud_none(*new_pud));
>>
>> - /* Set the new pud */
>> - set_pud_at(mm, new_addr, new_pud, pud);
>> + pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
>> flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> --
>> 2.30.2
>>
>>
>
> This commit causes my WSL2 VM to close when compiling something memory
> intensive, such as an x86_64_defconfig + CONFIG_LTO_CLANG_FULL=y kernel
> or LLVM/Clang. Unfortunately, I do not have much further information to
> provide since I do not see any sort of splat in dmesg right before it
> closes and I have found zero information about getting the previous
> kernel message in WSL2 (custom init so no systemd or anything).
>
> The config file is the stock one from Microsoft:
>
> https://github.com/microsoft/WSL2-Linux-Kernel/blob/a571dc8cedc8e0e56487c0dc93243e0b5db8960a/Microsoft/config-wsl
>
> I have attached my .config anyways, which includes CONFIG_DEBUG_VM,
> which does not appear to show anything out of the ordinary. I have also
> attached a dmesg just in case anything sticks out. I am happy to provide
> any additional information or perform additional debugging steps as
> needed.
>
Can you try this change?
modified mm/mremap.c
@@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
pmd_clear(old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
- pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
+ pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-19 4:46 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-19 4:46 UTC (permalink / raw)
To: Nathan Chancellor
Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
Nathan Chancellor <nathan@kernel.org> writes:
> Hi Aneesh,
>
> On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
>> pmd/pud_populate is the right interface to be used to set the respective
>> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
>> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
>> PTE here, use the pmd/pud_populate interface.
>>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>> ---
>> mm/mremap.c | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/mm/mremap.c b/mm/mremap.c
>> index ec8f840399ed..574287f9bb39 100644
>> --- a/mm/mremap.c
>> +++ b/mm/mremap.c
>> @@ -26,6 +26,7 @@
>>
>> #include <asm/cacheflush.h>
>> #include <asm/tlbflush.h>
>> +#include <asm/pgalloc.h>
>>
>> #include "internal.h"
>>
>> @@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
>> pmd_clear(old_pmd);
>>
>> VM_BUG_ON(!pmd_none(*new_pmd));
>> + pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>>
>> - /* Set the new pmd */
>> - set_pmd_at(mm, new_addr, new_pmd, pmd);
>> flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> @@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
>>
>> VM_BUG_ON(!pud_none(*new_pud));
>>
>> - /* Set the new pud */
>> - set_pud_at(mm, new_addr, new_pud, pud);
>> + pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
>> flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> --
>> 2.30.2
>>
>>
>
> This commit causes my WSL2 VM to close when compiling something memory
> intensive, such as an x86_64_defconfig + CONFIG_LTO_CLANG_FULL=y kernel
> or LLVM/Clang. Unfortunately, I do not have much further information to
> provide since I do not see any sort of splat in dmesg right before it
> closes and I have found zero information about getting the previous
> kernel message in WSL2 (custom init so no systemd or anything).
>
> The config file is the stock one from Microsoft:
>
> https://github.com/microsoft/WSL2-Linux-Kernel/blob/a571dc8cedc8e0e56487c0dc93243e0b5db8960a/Microsoft/config-wsl
>
> I have attached my .config anyways, which includes CONFIG_DEBUG_VM,
> which does not appear to show anything out of the ordinary. I have also
> attached a dmesg just in case anything sticks out. I am happy to provide
> any additional information or perform additional debugging steps as
> needed.
>
Can you try this change?
modified mm/mremap.c
@@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
pmd_clear(old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
- pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
+ pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-19 4:46 ` Aneesh Kumar K.V
@ 2021-05-19 18:02 ` Nathan Chancellor
-1 siblings, 0 replies; 106+ messages in thread
From: Nathan Chancellor @ 2021-05-19 18:02 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On 5/18/2021 9:46 PM, Aneesh Kumar K.V wrote:
> Nathan Chancellor <nathan@kernel.org> writes:
>
>> Hi Aneesh,
>>
>> On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
>>> pmd/pud_populate is the right interface to be used to set the respective
>>> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
>>> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
>>> PTE here, use the pmd/pud_populate interface.
>>>
>>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>>> ---
>>> mm/mremap.c | 7 +++----
>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/mm/mremap.c b/mm/mremap.c
>>> index ec8f840399ed..574287f9bb39 100644
>>> --- a/mm/mremap.c
>>> +++ b/mm/mremap.c
>>> @@ -26,6 +26,7 @@
>>>
>>> #include <asm/cacheflush.h>
>>> #include <asm/tlbflush.h>
>>> +#include <asm/pgalloc.h>
>>>
>>> #include "internal.h"
>>>
>>> @@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
>>> pmd_clear(old_pmd);
>>>
>>> VM_BUG_ON(!pmd_none(*new_pmd));
>>> + pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>>>
>>> - /* Set the new pmd */
>>> - set_pmd_at(mm, new_addr, new_pmd, pmd);
>>> flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
>>> if (new_ptl != old_ptl)
>>> spin_unlock(new_ptl);
>>> @@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
>>>
>>> VM_BUG_ON(!pud_none(*new_pud));
>>>
>>> - /* Set the new pud */
>>> - set_pud_at(mm, new_addr, new_pud, pud);
>>> + pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
>>> flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
>>> if (new_ptl != old_ptl)
>>> spin_unlock(new_ptl);
>>> --
>>> 2.30.2
>>>
>>>
>>
>> This commit causes my WSL2 VM to close when compiling something memory
>> intensive, such as an x86_64_defconfig + CONFIG_LTO_CLANG_FULL=y kernel
>> or LLVM/Clang. Unfortunately, I do not have much further information to
>> provide since I do not see any sort of splat in dmesg right before it
>> closes and I have found zero information about getting the previous
>> kernel message in WSL2 (custom init so no systemd or anything).
>>
>> The config file is the stock one from Microsoft:
>>
>> https://github.com/microsoft/WSL2-Linux-Kernel/blob/a571dc8cedc8e0e56487c0dc93243e0b5db8960a/Microsoft/config-wsl
>>
>> I have attached my .config anyways, which includes CONFIG_DEBUG_VM,
>> which does not appear to show anything out of the ordinary. I have also
>> attached a dmesg just in case anything sticks out. I am happy to provide
>> any additional information or perform additional debugging steps as
>> needed.
>>
>
> Can you try this change?
Thank you for the quick diff! This resolves my issue.
Tested-by: Nathan Chancellor <nathan@kernel.org>
> modified mm/mremap.c
> @@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> pmd_clear(old_pmd);
>
> VM_BUG_ON(!pmd_none(*new_pmd));
> - pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
> + pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
>
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
>
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-19 18:02 ` Nathan Chancellor
0 siblings, 0 replies; 106+ messages in thread
From: Nathan Chancellor @ 2021-05-19 18:02 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On 5/18/2021 9:46 PM, Aneesh Kumar K.V wrote:
> Nathan Chancellor <nathan@kernel.org> writes:
>
>> Hi Aneesh,
>>
>> On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
>>> pmd/pud_populate is the right interface to be used to set the respective
>>> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
>>> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
>>> PTE here, use the pmd/pud_populate interface.
>>>
>>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>>> ---
>>> mm/mremap.c | 7 +++----
>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/mm/mremap.c b/mm/mremap.c
>>> index ec8f840399ed..574287f9bb39 100644
>>> --- a/mm/mremap.c
>>> +++ b/mm/mremap.c
>>> @@ -26,6 +26,7 @@
>>>
>>> #include <asm/cacheflush.h>
>>> #include <asm/tlbflush.h>
>>> +#include <asm/pgalloc.h>
>>>
>>> #include "internal.h"
>>>
>>> @@ -257,9 +258,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
>>> pmd_clear(old_pmd);
>>>
>>> VM_BUG_ON(!pmd_none(*new_pmd));
>>> + pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>>>
>>> - /* Set the new pmd */
>>> - set_pmd_at(mm, new_addr, new_pmd, pmd);
>>> flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
>>> if (new_ptl != old_ptl)
>>> spin_unlock(new_ptl);
>>> @@ -306,8 +306,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
>>>
>>> VM_BUG_ON(!pud_none(*new_pud));
>>>
>>> - /* Set the new pud */
>>> - set_pud_at(mm, new_addr, new_pud, pud);
>>> + pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
>>> flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
>>> if (new_ptl != old_ptl)
>>> spin_unlock(new_ptl);
>>> --
>>> 2.30.2
>>>
>>>
>>
>> This commit causes my WSL2 VM to close when compiling something memory
>> intensive, such as an x86_64_defconfig + CONFIG_LTO_CLANG_FULL=y kernel
>> or LLVM/Clang. Unfortunately, I do not have much further information to
>> provide since I do not see any sort of splat in dmesg right before it
>> closes and I have found zero information about getting the previous
>> kernel message in WSL2 (custom init so no systemd or anything).
>>
>> The config file is the stock one from Microsoft:
>>
>> https://github.com/microsoft/WSL2-Linux-Kernel/blob/a571dc8cedc8e0e56487c0dc93243e0b5db8960a/Microsoft/config-wsl
>>
>> I have attached my .config anyways, which includes CONFIG_DEBUG_VM,
>> which does not appear to show anything out of the ordinary. I have also
>> attached a dmesg just in case anything sticks out. I am happy to provide
>> any additional information or perform additional debugging steps as
>> needed.
>>
>
> Can you try this change?
Thank you for the quick diff! This resolves my issue.
Tested-by: Nathan Chancellor <nathan@kernel.org>
> modified mm/mremap.c
> @@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> pmd_clear(old_pmd);
>
> VM_BUG_ON(!pmd_none(*new_pmd));
> - pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
> + pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
>
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
>
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-19 4:46 ` Aneesh Kumar K.V
@ 2021-05-20 2:18 ` Peter Xu
-1 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 2:18 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Nathan Chancellor, linux-mm, akpm, mpe, linuxppc-dev,
kaleshsingh, npiggin, joel, Christophe Leroy
On Wed, May 19, 2021 at 10:16:07AM +0530, Aneesh Kumar K.V wrote:
> > On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
> >> pmd/pud_populate is the right interface to be used to set the respective
> >> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
> >> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
> >> PTE here, use the pmd/pud_populate interface.
[1]
> Can you try this change?
>
> modified mm/mremap.c
> @@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> pmd_clear(old_pmd);
>
> VM_BUG_ON(!pmd_none(*new_pmd));
> - pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
> + pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
>
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
I reported this issue today somewhere else:
https://lore.kernel.org/linux-mm/YKVemB5DuSqLFmmz@t490s/
And came to this same line after the bisection.
This seems to work at least for my userfaultfd test on shmem, however I don't
fully understand the commit message [1] on: How do we guarantee we're not
moving a thp pte?
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 2:18 ` Peter Xu
0 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 2:18 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: npiggin, Nathan Chancellor, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
On Wed, May 19, 2021 at 10:16:07AM +0530, Aneesh Kumar K.V wrote:
> > On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
> >> pmd/pud_populate is the right interface to be used to set the respective
> >> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
> >> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
> >> PTE here, use the pmd/pud_populate interface.
[1]
> Can you try this change?
>
> modified mm/mremap.c
> @@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> pmd_clear(old_pmd);
>
> VM_BUG_ON(!pmd_none(*new_pmd));
> - pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
> + pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
>
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
I reported this issue today somewhere else:
https://lore.kernel.org/linux-mm/YKVemB5DuSqLFmmz@t490s/
And came to this same line after the bisection.
This seems to work at least for my userfaultfd test on shmem, however I don't
fully understand the commit message [1] on: How do we guarantee we're not
moving a thp pte?
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 2:18 ` Peter Xu
@ 2021-05-20 8:26 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 8:26 UTC (permalink / raw)
To: Peter Xu
Cc: Nathan Chancellor, linux-mm, akpm, mpe, linuxppc-dev,
kaleshsingh, npiggin, joel, Christophe Leroy
On 5/20/21 7:48 AM, Peter Xu wrote:
> On Wed, May 19, 2021 at 10:16:07AM +0530, Aneesh Kumar K.V wrote:
>>> On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
>>>> pmd/pud_populate is the right interface to be used to set the respective
>>>> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
>>>> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
>>>> PTE here, use the pmd/pud_populate interface.
>
> [1]
>
>> Can you try this change?
>>
>> modified mm/mremap.c
>> @@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
>> pmd_clear(old_pmd);
>>
>> VM_BUG_ON(!pmd_none(*new_pmd));
>> - pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>> + pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
>>
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>
> I reported this issue today somewhere else:
>
> https://lore.kernel.org/linux-mm/YKVemB5DuSqLFmmz@t490s/
>
> And came to this same line after the bisection.
>
> This seems to work at least for my userfaultfd test on shmem, however I don't
> fully understand the commit message [1] on: How do we guarantee we're not
> moving a thp pte?
>
move_page_tables() checks for pmd_trans_huge() and ends up calling
move_huge_pmd if it is a THP entry.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 8:26 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 8:26 UTC (permalink / raw)
To: Peter Xu
Cc: npiggin, Nathan Chancellor, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
On 5/20/21 7:48 AM, Peter Xu wrote:
> On Wed, May 19, 2021 at 10:16:07AM +0530, Aneesh Kumar K.V wrote:
>>> On Thu, Apr 22, 2021 at 11:13:17AM +0530, Aneesh Kumar K.V wrote:
>>>> pmd/pud_populate is the right interface to be used to set the respective
>>>> page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at
>>>> can only be used to set a hugepage PTE. Since we are not setting up a hugepage
>>>> PTE here, use the pmd/pud_populate interface.
>
> [1]
>
>> Can you try this change?
>>
>> modified mm/mremap.c
>> @@ -279,7 +279,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
>> pmd_clear(old_pmd);
>>
>> VM_BUG_ON(!pmd_none(*new_pmd));
>> - pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>> + pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
>>
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>
> I reported this issue today somewhere else:
>
> https://lore.kernel.org/linux-mm/YKVemB5DuSqLFmmz@t490s/
>
> And came to this same line after the bisection.
>
> This seems to work at least for my userfaultfd test on shmem, however I don't
> fully understand the commit message [1] on: How do we guarantee we're not
> moving a thp pte?
>
move_page_tables() checks for pmd_trans_huge() and ends up calling
move_huge_pmd if it is a THP entry.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 8:26 ` Aneesh Kumar K.V
@ 2021-05-20 12:46 ` Peter Xu
-1 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 12:46 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Nathan Chancellor, linux-mm, akpm, mpe, linuxppc-dev,
kaleshsingh, npiggin, joel, Christophe Leroy
On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> > This seems to work at least for my userfaultfd test on shmem, however I don't
> > fully understand the commit message [1] on: How do we guarantee we're not
> > moving a thp pte?
> >
>
> move_page_tables() checks for pmd_trans_huge() and ends up calling
> move_huge_pmd if it is a THP entry.
Sorry to be unclear: what if a huge pud thp?
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 12:46 ` Peter Xu
0 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 12:46 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: npiggin, Nathan Chancellor, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> > This seems to work at least for my userfaultfd test on shmem, however I don't
> > fully understand the commit message [1] on: How do we guarantee we're not
> > moving a thp pte?
> >
>
> move_page_tables() checks for pmd_trans_huge() and ends up calling
> move_huge_pmd if it is a THP entry.
Sorry to be unclear: what if a huge pud thp?
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 12:46 ` Peter Xu
@ 2021-05-20 13:23 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 13:23 UTC (permalink / raw)
To: Peter Xu
Cc: Nathan Chancellor, linux-mm, akpm, mpe, linuxppc-dev,
kaleshsingh, npiggin, joel, Christophe Leroy
On 5/20/21 6:16 PM, Peter Xu wrote:
> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
>>> This seems to work at least for my userfaultfd test on shmem, however I don't
>>> fully understand the commit message [1] on: How do we guarantee we're not
>>> moving a thp pte?
>>>
>>
>> move_page_tables() checks for pmd_trans_huge() and ends up calling
>> move_huge_pmd if it is a THP entry.
>
> Sorry to be unclear: what if a huge pud thp?
>
I am still checking. Looking at the code before commit
c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
huge pud thp. I haven't studied huge pud thp enough to understand
whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
support.
We can do a move_huge_pud() like we do for huge pmd thp. But I am not
sure whether we handle those VMA's earlier and restrict mremap on them?
Are huge pud thp only allowed with DAX vmas?
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 13:23 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 13:23 UTC (permalink / raw)
To: Peter Xu
Cc: npiggin, Nathan Chancellor, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
On 5/20/21 6:16 PM, Peter Xu wrote:
> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
>>> This seems to work at least for my userfaultfd test on shmem, however I don't
>>> fully understand the commit message [1] on: How do we guarantee we're not
>>> moving a thp pte?
>>>
>>
>> move_page_tables() checks for pmd_trans_huge() and ends up calling
>> move_huge_pmd if it is a THP entry.
>
> Sorry to be unclear: what if a huge pud thp?
>
I am still checking. Looking at the code before commit
c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
huge pud thp. I haven't studied huge pud thp enough to understand
whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
support.
We can do a move_huge_pud() like we do for huge pmd thp. But I am not
sure whether we handle those VMA's earlier and restrict mremap on them?
Are huge pud thp only allowed with DAX vmas?
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 13:23 ` Aneesh Kumar K.V
@ 2021-05-20 13:37 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 13:37 UTC (permalink / raw)
To: Peter Xu
Cc: Nathan Chancellor, linux-mm, akpm, mpe, linuxppc-dev,
kaleshsingh, npiggin, joel, Christophe Leroy
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> On 5/20/21 6:16 PM, Peter Xu wrote:
>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
>>>> fully understand the commit message [1] on: How do we guarantee we're not
>>>> moving a thp pte?
>>>>
>>>
>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
>>> move_huge_pmd if it is a THP entry.
>>
>> Sorry to be unclear: what if a huge pud thp?
>>
>
> I am still checking. Looking at the code before commit
> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> huge pud thp. I haven't studied huge pud thp enough to understand
> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> support.
>
> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> sure whether we handle those VMA's earlier and restrict mremap on them?
something like this? (not even compile tested). I am still not sure
whether this is really needed or we handle DAX VMA's in some other form.
diff --git a/mm/mremap.c b/mm/mremap.c
index 47c255b60150..037a7bd311f1 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -324,10 +324,51 @@ static inline bool move_normal_pud(struct vm_area_struct *vma,
}
#endif
+
+static bool move_huge_pud(struct vm_area_struct *vma, unsigned long old_addr,
+ unsigned long new_addr, pud_t *old_pud, pud_t *new_pud)
+{
+ spinlock_t *old_ptl, *new_ptl;
+ struct mm_struct *mm = vma->vm_mm;
+ pud_t pud;
+
+ /*
+ * The destination pud shouldn't be established, free_pgtables()
+ * should have released it.
+ */
+ if (WARN_ON_ONCE(!pud_none(*new_pud)))
+ return false;
+
+ /*
+ * We don't have to worry about the ordering of src and dst
+ * ptlocks because exclusive mmap_lock prevents deadlock.
+ */
+ old_ptl = pud_lock(vma->vm_mm, old_pud);
+ new_ptl = pud_lockptr(mm, new_pud);
+ if (new_ptl != old_ptl)
+ spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
+
+ /* Clear the pud */
+ pud = *old_pud;
+ pud_clear(old_pud);
+
+ VM_BUG_ON(!pud_none(*new_pud));
+
+ /* Set the new pud */
+ set_pud_at(mm, new_addr, new_pud, pud);
+ flush_pud_tlb_range(vma, old_addr, old_addr + HPAGE_PUD_SIZE);
+ if (new_ptl != old_ptl)
+ spin_unlock(new_ptl);
+ spin_unlock(old_ptl);
+
+ return true;
+}
+
enum pgt_entry {
NORMAL_PMD,
HPAGE_PMD,
NORMAL_PUD,
+ HPAGE_PUD,
};
/*
@@ -347,6 +388,7 @@ static __always_inline unsigned long get_extent(enum pgt_entry entry,
mask = PMD_MASK;
size = PMD_SIZE;
break;
+ case HPAGE_PUD:
case NORMAL_PUD:
mask = PUD_MASK;
size = PUD_SIZE;
@@ -395,6 +437,12 @@ static bool move_pgt_entry(enum pgt_entry entry, struct vm_area_struct *vma,
move_huge_pmd(vma, old_addr, new_addr, old_entry,
new_entry);
break;
+ case HPAGE_PUD:
+ moved = IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE_PUD) &&
+ move_huge_pud(vma, old_addr, new_addr, old_entry,
+ new_entry);
+ break;
+
default:
WARN_ON_ONCE(1);
break;
@@ -429,15 +477,23 @@ unsigned long move_page_tables(struct vm_area_struct *vma,
* PUD level if possible.
*/
extent = get_extent(NORMAL_PUD, old_addr, old_end, new_addr);
- if (IS_ENABLED(CONFIG_HAVE_MOVE_PUD) && extent == PUD_SIZE) {
- pud_t *old_pud, *new_pud;
- old_pud = get_old_pud(vma->vm_mm, old_addr);
- if (!old_pud)
+ old_pud = get_old_pud(vma->vm_mm, old_addr);
+ if (!old_pud)
+ continue;
+ new_pud = alloc_new_pud(vma->vm_mm, vma, new_addr);
+ if (!new_pud)
+ break;
+ if (pud_trans_huge(*old_pud) || pud_devmap(*old_pud)) {
+ if (extent == HPAGE_PUD_SIZE) {
+ move_pgt_entry(HPAGE_PUD, vma, old_addr, new_addr,
+ old_pud, new_pud, need_rmap_locks);
+ /* We ignore and continue on error? */
continue;
- new_pud = alloc_new_pud(vma->vm_mm, vma, new_addr);
- if (!new_pud)
- break;
+ }
+ } else if (IS_ENABLED(CONFIG_HAVE_MOVE_PUD) && extent == PUD_SIZE) {
+ pud_t *old_pud, *new_pud;
+
if (move_pgt_entry(NORMAL_PUD, vma, old_addr, new_addr,
old_pud, new_pud, need_rmap_locks))
continue;
>
> Are huge pud thp only allowed with DAX vmas?
>
>
> -aneesh
^ permalink raw reply related [flat|nested] 106+ messages in thread* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 13:37 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 13:37 UTC (permalink / raw)
To: Peter Xu
Cc: npiggin, Nathan Chancellor, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> On 5/20/21 6:16 PM, Peter Xu wrote:
>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
>>>> fully understand the commit message [1] on: How do we guarantee we're not
>>>> moving a thp pte?
>>>>
>>>
>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
>>> move_huge_pmd if it is a THP entry.
>>
>> Sorry to be unclear: what if a huge pud thp?
>>
>
> I am still checking. Looking at the code before commit
> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> huge pud thp. I haven't studied huge pud thp enough to understand
> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> support.
>
> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> sure whether we handle those VMA's earlier and restrict mremap on them?
something like this? (not even compile tested). I am still not sure
whether this is really needed or we handle DAX VMA's in some other form.
diff --git a/mm/mremap.c b/mm/mremap.c
index 47c255b60150..037a7bd311f1 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -324,10 +324,51 @@ static inline bool move_normal_pud(struct vm_area_struct *vma,
}
#endif
+
+static bool move_huge_pud(struct vm_area_struct *vma, unsigned long old_addr,
+ unsigned long new_addr, pud_t *old_pud, pud_t *new_pud)
+{
+ spinlock_t *old_ptl, *new_ptl;
+ struct mm_struct *mm = vma->vm_mm;
+ pud_t pud;
+
+ /*
+ * The destination pud shouldn't be established, free_pgtables()
+ * should have released it.
+ */
+ if (WARN_ON_ONCE(!pud_none(*new_pud)))
+ return false;
+
+ /*
+ * We don't have to worry about the ordering of src and dst
+ * ptlocks because exclusive mmap_lock prevents deadlock.
+ */
+ old_ptl = pud_lock(vma->vm_mm, old_pud);
+ new_ptl = pud_lockptr(mm, new_pud);
+ if (new_ptl != old_ptl)
+ spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
+
+ /* Clear the pud */
+ pud = *old_pud;
+ pud_clear(old_pud);
+
+ VM_BUG_ON(!pud_none(*new_pud));
+
+ /* Set the new pud */
+ set_pud_at(mm, new_addr, new_pud, pud);
+ flush_pud_tlb_range(vma, old_addr, old_addr + HPAGE_PUD_SIZE);
+ if (new_ptl != old_ptl)
+ spin_unlock(new_ptl);
+ spin_unlock(old_ptl);
+
+ return true;
+}
+
enum pgt_entry {
NORMAL_PMD,
HPAGE_PMD,
NORMAL_PUD,
+ HPAGE_PUD,
};
/*
@@ -347,6 +388,7 @@ static __always_inline unsigned long get_extent(enum pgt_entry entry,
mask = PMD_MASK;
size = PMD_SIZE;
break;
+ case HPAGE_PUD:
case NORMAL_PUD:
mask = PUD_MASK;
size = PUD_SIZE;
@@ -395,6 +437,12 @@ static bool move_pgt_entry(enum pgt_entry entry, struct vm_area_struct *vma,
move_huge_pmd(vma, old_addr, new_addr, old_entry,
new_entry);
break;
+ case HPAGE_PUD:
+ moved = IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE_PUD) &&
+ move_huge_pud(vma, old_addr, new_addr, old_entry,
+ new_entry);
+ break;
+
default:
WARN_ON_ONCE(1);
break;
@@ -429,15 +477,23 @@ unsigned long move_page_tables(struct vm_area_struct *vma,
* PUD level if possible.
*/
extent = get_extent(NORMAL_PUD, old_addr, old_end, new_addr);
- if (IS_ENABLED(CONFIG_HAVE_MOVE_PUD) && extent == PUD_SIZE) {
- pud_t *old_pud, *new_pud;
- old_pud = get_old_pud(vma->vm_mm, old_addr);
- if (!old_pud)
+ old_pud = get_old_pud(vma->vm_mm, old_addr);
+ if (!old_pud)
+ continue;
+ new_pud = alloc_new_pud(vma->vm_mm, vma, new_addr);
+ if (!new_pud)
+ break;
+ if (pud_trans_huge(*old_pud) || pud_devmap(*old_pud)) {
+ if (extent == HPAGE_PUD_SIZE) {
+ move_pgt_entry(HPAGE_PUD, vma, old_addr, new_addr,
+ old_pud, new_pud, need_rmap_locks);
+ /* We ignore and continue on error? */
continue;
- new_pud = alloc_new_pud(vma->vm_mm, vma, new_addr);
- if (!new_pud)
- break;
+ }
+ } else if (IS_ENABLED(CONFIG_HAVE_MOVE_PUD) && extent == PUD_SIZE) {
+ pud_t *old_pud, *new_pud;
+
if (move_pgt_entry(NORMAL_PUD, vma, old_addr, new_addr,
old_pud, new_pud, need_rmap_locks))
continue;
>
> Are huge pud thp only allowed with DAX vmas?
>
>
> -aneesh
^ permalink raw reply related [flat|nested] 106+ messages in thread* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 13:37 ` Aneesh Kumar K.V
@ 2021-05-20 14:57 ` Peter Xu
-1 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 14:57 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Nathan Chancellor, linux-mm, akpm, mpe, linuxppc-dev,
kaleshsingh, npiggin, joel, Christophe Leroy
On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>
> > On 5/20/21 6:16 PM, Peter Xu wrote:
> >> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> >>>> This seems to work at least for my userfaultfd test on shmem, however I don't
> >>>> fully understand the commit message [1] on: How do we guarantee we're not
> >>>> moving a thp pte?
> >>>>
> >>>
> >>> move_page_tables() checks for pmd_trans_huge() and ends up calling
> >>> move_huge_pmd if it is a THP entry.
> >>
> >> Sorry to be unclear: what if a huge pud thp?
> >>
> >
> > I am still checking. Looking at the code before commit
> > c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> > huge pud thp. I haven't studied huge pud thp enough to understand
> > whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> > support.
> >
> > We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> > sure whether we handle those VMA's earlier and restrict mremap on them?
>
> something like this? (not even compile tested). I am still not sure
> whether this is really needed or we handle DAX VMA's in some other form.
Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
default so far) it does seem to work even with huge pud, while after this patch
it seems to be not working anymore, even with your follow up fix.
Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
for dax or whatever backend?
Ideally maybe rework this patch (or series?) and repost it for a better review?
Agree the risk seems low. I'll leave that to you and Andrew to decide..
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 14:57 ` Peter Xu
0 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 14:57 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: npiggin, Nathan Chancellor, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>
> > On 5/20/21 6:16 PM, Peter Xu wrote:
> >> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> >>>> This seems to work at least for my userfaultfd test on shmem, however I don't
> >>>> fully understand the commit message [1] on: How do we guarantee we're not
> >>>> moving a thp pte?
> >>>>
> >>>
> >>> move_page_tables() checks for pmd_trans_huge() and ends up calling
> >>> move_huge_pmd if it is a THP entry.
> >>
> >> Sorry to be unclear: what if a huge pud thp?
> >>
> >
> > I am still checking. Looking at the code before commit
> > c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> > huge pud thp. I haven't studied huge pud thp enough to understand
> > whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> > support.
> >
> > We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> > sure whether we handle those VMA's earlier and restrict mremap on them?
>
> something like this? (not even compile tested). I am still not sure
> whether this is really needed or we handle DAX VMA's in some other form.
Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
default so far) it does seem to work even with huge pud, while after this patch
it seems to be not working anymore, even with your follow up fix.
Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
for dax or whatever backend?
Ideally maybe rework this patch (or series?) and repost it for a better review?
Agree the risk seems low. I'll leave that to you and Andrew to decide..
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 14:57 ` Peter Xu
@ 2021-05-20 19:06 ` Zi Yan
-1 siblings, 0 replies; 106+ messages in thread
From: Zi Yan @ 2021-05-20 19:06 UTC (permalink / raw)
To: Peter Xu
Cc: Aneesh Kumar K.V, Nathan Chancellor, linux-mm, akpm, mpe,
linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy
[-- Attachment #1: Type: text/plain, Size: 2393 bytes --]
On 20 May 2021, at 10:57, Peter Xu wrote:
> On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
>> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>>
>>> On 5/20/21 6:16 PM, Peter Xu wrote:
>>>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
>>>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
>>>>>> fully understand the commit message [1] on: How do we guarantee we're not
>>>>>> moving a thp pte?
>>>>>>
>>>>>
>>>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
>>>>> move_huge_pmd if it is a THP entry.
>>>>
>>>> Sorry to be unclear: what if a huge pud thp?
>>>>
>>>
>>> I am still checking. Looking at the code before commit
>>> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
>>> huge pud thp. I haven't studied huge pud thp enough to understand
>>> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
>>> support.
>>>
>>> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
>>> sure whether we handle those VMA's earlier and restrict mremap on them?
>>
>> something like this? (not even compile tested). I am still not sure
>> whether this is really needed or we handle DAX VMA's in some other form.
>
> Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
>
> It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
> default so far) it does seem to work even with huge pud, while after this patch
> it seems to be not working anymore, even with your follow up fix.
>
> Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
> someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
> for dax or whatever backend?
>
> Ideally maybe rework this patch (or series?) and repost it for a better review?
> Agree the risk seems low. I'll leave that to you and Andrew to decide..
It seems that the mremap function for 1GB DAX THP was not added when 1GB DAX THP
was implemented[1]. I guess no one is using mremap on 1GB DAX THP. Maybe we want
to at least add a warning or VM_BUG_ON to catch this or use Aneesh’s move_huge_pud()
to handle the situation properly?
[1] https://lore.kernel.org/linux-ext4/148545012634.17912.13951763606410303827.stgit@djiang5-desk3.ch.intel.com/
—
Best Regards,
Yan, Zi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 19:06 ` Zi Yan
0 siblings, 0 replies; 106+ messages in thread
From: Zi Yan @ 2021-05-20 19:06 UTC (permalink / raw)
To: Peter Xu
Cc: Aneesh Kumar K.V, kaleshsingh, npiggin, Nathan Chancellor,
linux-mm, joel, akpm, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 2393 bytes --]
On 20 May 2021, at 10:57, Peter Xu wrote:
> On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
>> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>>
>>> On 5/20/21 6:16 PM, Peter Xu wrote:
>>>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
>>>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
>>>>>> fully understand the commit message [1] on: How do we guarantee we're not
>>>>>> moving a thp pte?
>>>>>>
>>>>>
>>>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
>>>>> move_huge_pmd if it is a THP entry.
>>>>
>>>> Sorry to be unclear: what if a huge pud thp?
>>>>
>>>
>>> I am still checking. Looking at the code before commit
>>> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
>>> huge pud thp. I haven't studied huge pud thp enough to understand
>>> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
>>> support.
>>>
>>> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
>>> sure whether we handle those VMA's earlier and restrict mremap on them?
>>
>> something like this? (not even compile tested). I am still not sure
>> whether this is really needed or we handle DAX VMA's in some other form.
>
> Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
>
> It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
> default so far) it does seem to work even with huge pud, while after this patch
> it seems to be not working anymore, even with your follow up fix.
>
> Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
> someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
> for dax or whatever backend?
>
> Ideally maybe rework this patch (or series?) and repost it for a better review?
> Agree the risk seems low. I'll leave that to you and Andrew to decide..
It seems that the mremap function for 1GB DAX THP was not added when 1GB DAX THP
was implemented[1]. I guess no one is using mremap on 1GB DAX THP. Maybe we want
to at least add a warning or VM_BUG_ON to catch this or use Aneesh’s move_huge_pud()
to handle the situation properly?
[1] https://lore.kernel.org/linux-ext4/148545012634.17912.13951763606410303827.stgit@djiang5-desk3.ch.intel.com/
—
Best Regards,
Yan, Zi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 19:06 ` Zi Yan
@ 2021-05-20 20:01 ` Peter Xu
-1 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 20:01 UTC (permalink / raw)
To: Zi Yan
Cc: Aneesh Kumar K.V, Nathan Chancellor, linux-mm, akpm, mpe,
linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy
On Thu, May 20, 2021 at 03:06:30PM -0400, Zi Yan wrote:
> On 20 May 2021, at 10:57, Peter Xu wrote:
>
> > On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
> >> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> >>
> >>> On 5/20/21 6:16 PM, Peter Xu wrote:
> >>>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> >>>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
> >>>>>> fully understand the commit message [1] on: How do we guarantee we're not
> >>>>>> moving a thp pte?
> >>>>>>
> >>>>>
> >>>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
> >>>>> move_huge_pmd if it is a THP entry.
> >>>>
> >>>> Sorry to be unclear: what if a huge pud thp?
> >>>>
> >>>
> >>> I am still checking. Looking at the code before commit
> >>> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> >>> huge pud thp. I haven't studied huge pud thp enough to understand
> >>> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> >>> support.
> >>>
> >>> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> >>> sure whether we handle those VMA's earlier and restrict mremap on them?
> >>
> >> something like this? (not even compile tested). I am still not sure
> >> whether this is really needed or we handle DAX VMA's in some other form.
> >
> > Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
> >
> > It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
> > default so far) it does seem to work even with huge pud, while after this patch
> > it seems to be not working anymore, even with your follow up fix.
> >
> > Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
> > someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
> > for dax or whatever backend?
> >
> > Ideally maybe rework this patch (or series?) and repost it for a better review?
> > Agree the risk seems low. I'll leave that to you and Andrew to decide..
>
> It seems that the mremap function for 1GB DAX THP was not added when 1GB DAX THP
> was implemented[1].
Yes, but trickily as I mentioned it seems Android's CONFIG_HAVE_MOVE_PUD has
done this right (with no intention I guess) with the set_pud_at() before this
patch is merged, so we might have a short period that this might start to work..
> I guess no one is using mremap on 1GB DAX THP. Maybe we want
> to at least add a warning or VM_BUG_ON to catch this or use Aneesh’s move_huge_pud()
> to handle the situation properly?
Agreed, if we decide to go with the patches, some warning (or even VM_BUG_ON,
which iiuc should be very not-suggested in most cases) looks better than
pgtable corruption reports.
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 20:01 ` Peter Xu
0 siblings, 0 replies; 106+ messages in thread
From: Peter Xu @ 2021-05-20 20:01 UTC (permalink / raw)
To: Zi Yan
Cc: Aneesh Kumar K.V, kaleshsingh, npiggin, Nathan Chancellor,
linux-mm, joel, akpm, linuxppc-dev
On Thu, May 20, 2021 at 03:06:30PM -0400, Zi Yan wrote:
> On 20 May 2021, at 10:57, Peter Xu wrote:
>
> > On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
> >> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> >>
> >>> On 5/20/21 6:16 PM, Peter Xu wrote:
> >>>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> >>>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
> >>>>>> fully understand the commit message [1] on: How do we guarantee we're not
> >>>>>> moving a thp pte?
> >>>>>>
> >>>>>
> >>>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
> >>>>> move_huge_pmd if it is a THP entry.
> >>>>
> >>>> Sorry to be unclear: what if a huge pud thp?
> >>>>
> >>>
> >>> I am still checking. Looking at the code before commit
> >>> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> >>> huge pud thp. I haven't studied huge pud thp enough to understand
> >>> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> >>> support.
> >>>
> >>> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> >>> sure whether we handle those VMA's earlier and restrict mremap on them?
> >>
> >> something like this? (not even compile tested). I am still not sure
> >> whether this is really needed or we handle DAX VMA's in some other form.
> >
> > Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
> >
> > It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
> > default so far) it does seem to work even with huge pud, while after this patch
> > it seems to be not working anymore, even with your follow up fix.
> >
> > Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
> > someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
> > for dax or whatever backend?
> >
> > Ideally maybe rework this patch (or series?) and repost it for a better review?
> > Agree the risk seems low. I'll leave that to you and Andrew to decide..
>
> It seems that the mremap function for 1GB DAX THP was not added when 1GB DAX THP
> was implemented[1].
Yes, but trickily as I mentioned it seems Android's CONFIG_HAVE_MOVE_PUD has
done this right (with no intention I guess) with the set_pud_at() before this
patch is merged, so we might have a short period that this might start to work..
> I guess no one is using mremap on 1GB DAX THP. Maybe we want
> to at least add a warning or VM_BUG_ON to catch this or use Aneesh’s move_huge_pud()
> to handle the situation properly?
Agreed, if we decide to go with the patches, some warning (or even VM_BUG_ON,
which iiuc should be very not-suggested in most cases) looks better than
pgtable corruption reports.
--
Peter Xu
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
2021-05-20 20:01 ` Peter Xu
@ 2021-05-20 20:25 ` Kalesh Singh
-1 siblings, 0 replies; 106+ messages in thread
From: Kalesh Singh @ 2021-05-20 20:25 UTC (permalink / raw)
To: Peter Xu
Cc: Zi Yan, Aneesh Kumar K.V, Nathan Chancellor,
open list:MEMORY MANAGEMENT, Andrew Morton, mpe, linuxppc-dev,
npiggin, joel, Christophe Leroy
On Thu, May 20, 2021 at 4:01 PM Peter Xu <peterx@redhat.com> wrote:
>
> On Thu, May 20, 2021 at 03:06:30PM -0400, Zi Yan wrote:
> > On 20 May 2021, at 10:57, Peter Xu wrote:
> >
> > > On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
> > >> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> > >>
> > >>> On 5/20/21 6:16 PM, Peter Xu wrote:
> > >>>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> > >>>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
> > >>>>>> fully understand the commit message [1] on: How do we guarantee we're not
> > >>>>>> moving a thp pte?
> > >>>>>>
> > >>>>>
> > >>>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
> > >>>>> move_huge_pmd if it is a THP entry.
> > >>>>
> > >>>> Sorry to be unclear: what if a huge pud thp?
> > >>>>
> > >>>
> > >>> I am still checking. Looking at the code before commit
> > >>> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> > >>> huge pud thp. I haven't studied huge pud thp enough to understand
> > >>> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> > >>> support.
> > >>>
> > >>> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> > >>> sure whether we handle those VMA's earlier and restrict mremap on them?
> > >>
> > >> something like this? (not even compile tested). I am still not sure
> > >> whether this is really needed or we handle DAX VMA's in some other form.
> > >
> > > Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
> > >
> > > It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
> > > default so far) it does seem to work even with huge pud, while after this patch
> > > it seems to be not working anymore, even with your follow up fix.
> > >
> > > Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
> > > someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
> > > for dax or whatever backend?
> > >
> > > Ideally maybe rework this patch (or series?) and repost it for a better review?
> > > Agree the risk seems low. I'll leave that to you and Andrew to decide..
> >
> > It seems that the mremap function for 1GB DAX THP was not added when 1GB DAX THP
> > was implemented[1].
>
> Yes, but trickily as I mentioned it seems Android's CONFIG_HAVE_MOVE_PUD has
> done this right (with no intention I guess) with the set_pud_at() before this
> patch is merged, so we might have a short period that this might start to work..
>
It may have coincidentally handled the huge PUD case, but I hadn't
considered huge PUDs when implementing the HAVE_MOVE_PUD patchset. Or
as Zi suggested, huge PUD mremap may be unused atm, I haven't seen any
related breakages since enabling HAVE_MOVE_PUD for x86 and arm64
> > I guess no one is using mremap on 1GB DAX THP. Maybe we want
> > to at least add a warning or VM_BUG_ON to catch this or use Aneesh’s move_huge_pud()
> > to handle the situation properly?
>
> Agreed, if we decide to go with the patches, some warning (or even VM_BUG_ON,
> which iiuc should be very not-suggested in most cases) looks better than
> pgtable corruption reports.
>
> --
> Peter Xu
>
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 3/9] mm/mremap: Use pmd/pud_poplulate to update page table entries
@ 2021-05-20 20:25 ` Kalesh Singh
0 siblings, 0 replies; 106+ messages in thread
From: Kalesh Singh @ 2021-05-20 20:25 UTC (permalink / raw)
To: Peter Xu
Cc: Aneesh Kumar K.V, npiggin, Nathan Chancellor,
open list:MEMORY MANAGEMENT, Zi Yan, joel, Andrew Morton,
linuxppc-dev
On Thu, May 20, 2021 at 4:01 PM Peter Xu <peterx@redhat.com> wrote:
>
> On Thu, May 20, 2021 at 03:06:30PM -0400, Zi Yan wrote:
> > On 20 May 2021, at 10:57, Peter Xu wrote:
> >
> > > On Thu, May 20, 2021 at 07:07:57PM +0530, Aneesh Kumar K.V wrote:
> > >> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> > >>
> > >>> On 5/20/21 6:16 PM, Peter Xu wrote:
> > >>>> On Thu, May 20, 2021 at 01:56:54PM +0530, Aneesh Kumar K.V wrote:
> > >>>>>> This seems to work at least for my userfaultfd test on shmem, however I don't
> > >>>>>> fully understand the commit message [1] on: How do we guarantee we're not
> > >>>>>> moving a thp pte?
> > >>>>>>
> > >>>>>
> > >>>>> move_page_tables() checks for pmd_trans_huge() and ends up calling
> > >>>>> move_huge_pmd if it is a THP entry.
> > >>>>
> > >>>> Sorry to be unclear: what if a huge pud thp?
> > >>>>
> > >>>
> > >>> I am still checking. Looking at the code before commit
> > >>> c49dd340180260c6239e453263a9a244da9a7c85, I don't see kernel handling
> > >>> huge pud thp. I haven't studied huge pud thp enough to understand
> > >>> whether c49dd340180260c6239e453263a9a244da9a7c85 intent to add that
> > >>> support.
> > >>>
> > >>> We can do a move_huge_pud() like we do for huge pmd thp. But I am not
> > >>> sure whether we handle those VMA's earlier and restrict mremap on them?
> > >>
> > >> something like this? (not even compile tested). I am still not sure
> > >> whether this is really needed or we handle DAX VMA's in some other form.
> > >
> > > Yeah maybe (you may want to at least drop that extra "case HPAGE_PUD").
> > >
> > > It's just that if with CONFIG_HAVE_MOVE_PUD (x86 and arm64 enables it by
> > > default so far) it does seem to work even with huge pud, while after this patch
> > > it seems to be not working anymore, even with your follow up fix.
> > >
> > > Indeed I saw CONFIG_HAVE_MOVE_PUD is introduced a few months ago so breaking
> > > someone seems to be unlikely, perhaps no real user yet to mremap() a huge pud
> > > for dax or whatever backend?
> > >
> > > Ideally maybe rework this patch (or series?) and repost it for a better review?
> > > Agree the risk seems low. I'll leave that to you and Andrew to decide..
> >
> > It seems that the mremap function for 1GB DAX THP was not added when 1GB DAX THP
> > was implemented[1].
>
> Yes, but trickily as I mentioned it seems Android's CONFIG_HAVE_MOVE_PUD has
> done this right (with no intention I guess) with the set_pud_at() before this
> patch is merged, so we might have a short period that this might start to work..
>
It may have coincidentally handled the huge PUD case, but I hadn't
considered huge PUDs when implementing the HAVE_MOVE_PUD patchset. Or
as Zi suggested, huge PUD mremap may be unused atm, I haven't seen any
related breakages since enabling HAVE_MOVE_PUD for x86 and arm64
> > I guess no one is using mremap on 1GB DAX THP. Maybe we want
> > to at least add a warning or VM_BUG_ON to catch this or use Aneesh’s move_huge_pud()
> > to handle the situation properly?
>
> Agreed, if we decide to go with the patches, some warning (or even VM_BUG_ON,
> which iiuc should be very not-suggested in most cases) looks better than
> pgtable corruption reports.
>
> --
> Peter Xu
>
^ permalink raw reply [flat|nested] 106+ messages in thread
* [PATCH v5 4/9] powerpc/mm/book3s64: Fix possible build error
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
Update _tlbiel_pid() such that we can avoid build errors like below when
using this function in other places.
arch/powerpc/mm/book3s64/radix_tlb.c: In function ‘__radix__flush_tlb_range_psize’:
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: warning: ‘asm’ operand 3 probably does not match constraints
114 | asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
| ^~~
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: error: impossible constraint in ‘asm’
make[4]: *** [scripts/Makefile.build:271: arch/powerpc/mm/book3s64/radix_tlb.o] Error 1
m
With this fix, we can also drop the __always_inline in __radix_flush_tlb_range_psize
which was added by commit e12d6d7d46a6 ("powerpc/mm/radix: mark __radix__flush_tlb_range_psize() as __always_inline")
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/mm/book3s64/radix_tlb.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 409e61210789..817a02ef6032 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -291,22 +291,30 @@ static inline void fixup_tlbie_lpid(unsigned long lpid)
/*
* We use 128 set in radix mode and 256 set in hpt mode.
*/
-static __always_inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
+static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
{
int set;
asm volatile("ptesync": : :"memory");
- /*
- * Flush the first set of the TLB, and if we're doing a RIC_FLUSH_ALL,
- * also flush the entire Page Walk Cache.
- */
- __tlbiel_pid(pid, 0, ric);
+ switch (ric) {
+ case RIC_FLUSH_PWC:
- /* For PWC, only one flush is needed */
- if (ric == RIC_FLUSH_PWC) {
+ /* For PWC, only one flush is needed */
+ __tlbiel_pid(pid, 0, RIC_FLUSH_PWC);
ppc_after_tlbiel_barrier();
return;
+ case RIC_FLUSH_TLB:
+ __tlbiel_pid(pid, 0, RIC_FLUSH_TLB);
+ break;
+ case RIC_FLUSH_ALL:
+ default:
+ /*
+ * Flush the first set of the TLB, and if
+ * we're doing a RIC_FLUSH_ALL, also flush
+ * the entire Page Walk Cache.
+ */
+ __tlbiel_pid(pid, 0, RIC_FLUSH_ALL);
}
if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
@@ -1176,7 +1184,7 @@ void radix__tlb_flush(struct mmu_gather *tlb)
}
}
-static __always_inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
+static void __radix__flush_tlb_range_psize(struct mm_struct *mm,
unsigned long start, unsigned long end,
int psize, bool also_pwc)
{
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* [PATCH v5 4/9] powerpc/mm/book3s64: Fix possible build error
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
Update _tlbiel_pid() such that we can avoid build errors like below when
using this function in other places.
arch/powerpc/mm/book3s64/radix_tlb.c: In function ‘__radix__flush_tlb_range_psize’:
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: warning: ‘asm’ operand 3 probably does not match constraints
114 | asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
| ^~~
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: error: impossible constraint in ‘asm’
make[4]: *** [scripts/Makefile.build:271: arch/powerpc/mm/book3s64/radix_tlb.o] Error 1
m
With this fix, we can also drop the __always_inline in __radix_flush_tlb_range_psize
which was added by commit e12d6d7d46a6 ("powerpc/mm/radix: mark __radix__flush_tlb_range_psize() as __always_inline")
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/mm/book3s64/radix_tlb.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 409e61210789..817a02ef6032 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -291,22 +291,30 @@ static inline void fixup_tlbie_lpid(unsigned long lpid)
/*
* We use 128 set in radix mode and 256 set in hpt mode.
*/
-static __always_inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
+static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
{
int set;
asm volatile("ptesync": : :"memory");
- /*
- * Flush the first set of the TLB, and if we're doing a RIC_FLUSH_ALL,
- * also flush the entire Page Walk Cache.
- */
- __tlbiel_pid(pid, 0, ric);
+ switch (ric) {
+ case RIC_FLUSH_PWC:
- /* For PWC, only one flush is needed */
- if (ric == RIC_FLUSH_PWC) {
+ /* For PWC, only one flush is needed */
+ __tlbiel_pid(pid, 0, RIC_FLUSH_PWC);
ppc_after_tlbiel_barrier();
return;
+ case RIC_FLUSH_TLB:
+ __tlbiel_pid(pid, 0, RIC_FLUSH_TLB);
+ break;
+ case RIC_FLUSH_ALL:
+ default:
+ /*
+ * Flush the first set of the TLB, and if
+ * we're doing a RIC_FLUSH_ALL, also flush
+ * the entire Page Walk Cache.
+ */
+ __tlbiel_pid(pid, 0, RIC_FLUSH_ALL);
}
if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
@@ -1176,7 +1184,7 @@ void radix__tlb_flush(struct mmu_gather *tlb)
}
}
-static __always_inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
+static void __radix__flush_tlb_range_psize(struct mm_struct *mm,
unsigned long start, unsigned long end,
int psize, bool also_pwc)
{
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
No functional change in this patch
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
.../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
4 files changed, 42 insertions(+), 33 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
index 8b33601cdb9d..171441a43b35 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
@@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
}
#endif
-extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize);
-extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ bool flush_pwc);
+void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ bool flush_pwc);
+void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
+ unsigned long end, int psize, bool flush_pwc);
+void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
-extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
extern void radix__local_flush_all_mm(struct mm_struct *mm);
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
index 215973b4cb26..f9f8a3a264f7 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
}
+static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end,
+ bool flush_pwc)
+{
+ if (radix_enabled())
+ return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
+ return hash__flush_tlb_range(vma, start, end);
+}
#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
+{
+ return flush_pmd_tlb_pwc_range(vma, start, end, false);
+}
+
+static inline void flush_hugetlb_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end,
+ bool flush_pwc)
{
if (radix_enabled())
- return radix__flush_pmd_tlb_range(vma, start, end);
+ return radix__flush_hugetlb_tlb_range(vma, start, end, flush_pwc);
return hash__flush_tlb_range(vma, start, end);
}
@@ -60,9 +77,7 @@ static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
unsigned long start,
unsigned long end)
{
- if (radix_enabled())
- return radix__flush_hugetlb_tlb_range(vma, start, end);
- return hash__flush_tlb_range(vma, start, end);
+ return flush_hugetlb_tlb_pwc_range(vma, start, end, false);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
diff --git a/arch/powerpc/mm/book3s64/radix_hugetlbpage.c b/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
index cb91071eef52..e62f5679b119 100644
--- a/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
+++ b/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
@@ -26,13 +26,13 @@ void radix__local_flush_hugetlb_page(struct vm_area_struct *vma, unsigned long v
}
void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
+ unsigned long end, bool flush_pwc)
{
int psize;
struct hstate *hstate = hstate_file(vma->vm_file);
psize = hstate_get_psize(hstate);
- radix__flush_tlb_range_psize(vma->vm_mm, start, end, psize);
+ radix__flush_tlb_pwc_range_psize(vma->vm_mm, start, end, psize, flush_pwc);
}
/*
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 817a02ef6032..5a59e19f9e53 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -1090,7 +1090,7 @@ void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
{
#ifdef CONFIG_HUGETLB_PAGE
if (is_vm_hugetlb_page(vma))
- return radix__flush_hugetlb_tlb_range(vma, start, end);
+ return radix__flush_hugetlb_tlb_range(vma, start, end, false);
#endif
__radix__flush_tlb_range(vma->vm_mm, start, end);
@@ -1151,9 +1151,6 @@ void radix__flush_all_lpid_guest(unsigned int lpid)
_tlbie_lpid_guest(lpid, RIC_FLUSH_ALL);
}
-static void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize);
-
void radix__tlb_flush(struct mmu_gather *tlb)
{
int psize = 0;
@@ -1177,10 +1174,8 @@ void radix__tlb_flush(struct mmu_gather *tlb)
else
radix__flush_all_mm(mm);
} else {
- if (!tlb->freed_tables)
- radix__flush_tlb_range_psize(mm, start, end, psize);
- else
- radix__flush_tlb_pwc_range_psize(mm, start, end, psize);
+ radix__flush_tlb_pwc_range_psize(mm, start,
+ end, psize, tlb->freed_tables);
}
}
@@ -1254,16 +1249,10 @@ static void __radix__flush_tlb_range_psize(struct mm_struct *mm,
preempt_enable();
}
-void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize)
+void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
+ unsigned long end, int psize, bool flush_pwc)
{
- return __radix__flush_tlb_range_psize(mm, start, end, psize, false);
-}
-
-static void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize)
-{
- __radix__flush_tlb_range_psize(mm, start, end, psize, true);
+ __radix__flush_tlb_range_psize(mm, start, end, psize, flush_pwc);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -1315,9 +1304,11 @@ void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+ unsigned long start, unsigned long end,
+ bool flush_pwc)
{
- radix__flush_tlb_range_psize(vma->vm_mm, start, end, MMU_PAGE_2M);
+ __radix__flush_tlb_range_psize(vma->vm_mm, start,
+ end, MMU_PAGE_2M, flush_pwc);
}
EXPORT_SYMBOL(radix__flush_pmd_tlb_range);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
No functional change in this patch
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
.../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
4 files changed, 42 insertions(+), 33 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
index 8b33601cdb9d..171441a43b35 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
@@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
}
#endif
-extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize);
-extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ bool flush_pwc);
+void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ bool flush_pwc);
+void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
+ unsigned long end, int psize, bool flush_pwc);
+void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
-extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
extern void radix__local_flush_all_mm(struct mm_struct *mm);
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
index 215973b4cb26..f9f8a3a264f7 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
}
+static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end,
+ bool flush_pwc)
+{
+ if (radix_enabled())
+ return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
+ return hash__flush_tlb_range(vma, start, end);
+}
#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
+{
+ return flush_pmd_tlb_pwc_range(vma, start, end, false);
+}
+
+static inline void flush_hugetlb_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end,
+ bool flush_pwc)
{
if (radix_enabled())
- return radix__flush_pmd_tlb_range(vma, start, end);
+ return radix__flush_hugetlb_tlb_range(vma, start, end, flush_pwc);
return hash__flush_tlb_range(vma, start, end);
}
@@ -60,9 +77,7 @@ static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
unsigned long start,
unsigned long end)
{
- if (radix_enabled())
- return radix__flush_hugetlb_tlb_range(vma, start, end);
- return hash__flush_tlb_range(vma, start, end);
+ return flush_hugetlb_tlb_pwc_range(vma, start, end, false);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
diff --git a/arch/powerpc/mm/book3s64/radix_hugetlbpage.c b/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
index cb91071eef52..e62f5679b119 100644
--- a/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
+++ b/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
@@ -26,13 +26,13 @@ void radix__local_flush_hugetlb_page(struct vm_area_struct *vma, unsigned long v
}
void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
+ unsigned long end, bool flush_pwc)
{
int psize;
struct hstate *hstate = hstate_file(vma->vm_file);
psize = hstate_get_psize(hstate);
- radix__flush_tlb_range_psize(vma->vm_mm, start, end, psize);
+ radix__flush_tlb_pwc_range_psize(vma->vm_mm, start, end, psize, flush_pwc);
}
/*
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 817a02ef6032..5a59e19f9e53 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -1090,7 +1090,7 @@ void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
{
#ifdef CONFIG_HUGETLB_PAGE
if (is_vm_hugetlb_page(vma))
- return radix__flush_hugetlb_tlb_range(vma, start, end);
+ return radix__flush_hugetlb_tlb_range(vma, start, end, false);
#endif
__radix__flush_tlb_range(vma->vm_mm, start, end);
@@ -1151,9 +1151,6 @@ void radix__flush_all_lpid_guest(unsigned int lpid)
_tlbie_lpid_guest(lpid, RIC_FLUSH_ALL);
}
-static void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize);
-
void radix__tlb_flush(struct mmu_gather *tlb)
{
int psize = 0;
@@ -1177,10 +1174,8 @@ void radix__tlb_flush(struct mmu_gather *tlb)
else
radix__flush_all_mm(mm);
} else {
- if (!tlb->freed_tables)
- radix__flush_tlb_range_psize(mm, start, end, psize);
- else
- radix__flush_tlb_pwc_range_psize(mm, start, end, psize);
+ radix__flush_tlb_pwc_range_psize(mm, start,
+ end, psize, tlb->freed_tables);
}
}
@@ -1254,16 +1249,10 @@ static void __radix__flush_tlb_range_psize(struct mm_struct *mm,
preempt_enable();
}
-void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize)
+void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
+ unsigned long end, int psize, bool flush_pwc)
{
- return __radix__flush_tlb_range_psize(mm, start, end, psize, false);
-}
-
-static void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long end, int psize)
-{
- __radix__flush_tlb_range_psize(mm, start, end, psize, true);
+ __radix__flush_tlb_range_psize(mm, start, end, psize, flush_pwc);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -1315,9 +1304,11 @@ void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+ unsigned long start, unsigned long end,
+ bool flush_pwc)
{
- radix__flush_tlb_range_psize(vma->vm_mm, start, end, MMU_PAGE_2M);
+ __radix__flush_tlb_range_psize(vma->vm_mm, start,
+ end, MMU_PAGE_2M, flush_pwc);
}
EXPORT_SYMBOL(radix__flush_pmd_tlb_range);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-05-15 16:35 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-15 16:35 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
> No functional change in this patch
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> .../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
> arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
> arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
> arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
> 4 files changed, 42 insertions(+), 33 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
> index 8b33601cdb9d..171441a43b35 100644
> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
> @@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
> }
> #endif
>
> -extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
> - unsigned long start, unsigned long end);
> -extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
> - unsigned long end, int psize);
> -extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
> - unsigned long start, unsigned long end);
> -extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
> +void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
> + unsigned long start, unsigned long end,
> + bool flush_pwc);
> +void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
> + unsigned long start, unsigned long end,
> + bool flush_pwc);
> +void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
> + unsigned long end, int psize, bool flush_pwc);
> +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
> unsigned long end);
> -extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
> +void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
> +
>
> extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
> extern void radix__local_flush_all_mm(struct mm_struct *mm);
> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
> index 215973b4cb26..f9f8a3a264f7 100644
> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
> }
>
> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
^^^^
> + unsigned long start,
> + unsigned long end,
> + bool flush_pwc)
> +{
> + if (radix_enabled())
> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
> + return hash__flush_tlb_range(vma, start, end);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +}
>
> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
^^^^
> unsigned long start, unsigned long end)
> +{
> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Doesn't that cause build warnings/errors all over the place ?
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-15 16:35 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-15 16:35 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
> No functional change in this patch
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> .../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
> arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
> arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
> arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
> 4 files changed, 42 insertions(+), 33 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
> index 8b33601cdb9d..171441a43b35 100644
> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
> @@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
> }
> #endif
>
> -extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
> - unsigned long start, unsigned long end);
> -extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
> - unsigned long end, int psize);
> -extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
> - unsigned long start, unsigned long end);
> -extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
> +void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
> + unsigned long start, unsigned long end,
> + bool flush_pwc);
> +void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
> + unsigned long start, unsigned long end,
> + bool flush_pwc);
> +void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
> + unsigned long end, int psize, bool flush_pwc);
> +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
> unsigned long end);
> -extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
> +void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
> +
>
> extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
> extern void radix__local_flush_all_mm(struct mm_struct *mm);
> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
> index 215973b4cb26..f9f8a3a264f7 100644
> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
> }
>
> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
^^^^
> + unsigned long start,
> + unsigned long end,
> + bool flush_pwc)
> +{
> + if (radix_enabled())
> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
> + return hash__flush_tlb_range(vma, start, end);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +}
>
> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
^^^^
> unsigned long start, unsigned long end)
> +{
> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Doesn't that cause build warnings/errors all over the place ?
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-15 16:35 ` Guenter Roeck
@ 2021-05-15 20:41 ` Andrew Morton
-1 siblings, 0 replies; 106+ messages in thread
From: Andrew Morton @ 2021-05-15 20:41 UTC (permalink / raw)
To: Guenter Roeck
Cc: Aneesh Kumar K.V, linux-mm, mpe, linuxppc-dev, kaleshsingh,
npiggin, joel, Christophe Leroy
On Sat, 15 May 2021 09:35:25 -0700 Guenter Roeck <linux@roeck-us.net> wrote:
> >
> > #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
> > static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
> ^^^^
> > unsigned long start, unsigned long end)
> > +{
> > + return flush_pmd_tlb_pwc_range(vma, start, end, false);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Doesn't that cause build warnings/errors all over the place ?
It will, thanks. I queued a fix.
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-15 20:41 ` Andrew Morton
0 siblings, 0 replies; 106+ messages in thread
From: Andrew Morton @ 2021-05-15 20:41 UTC (permalink / raw)
To: Guenter Roeck
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, linuxppc-dev
On Sat, 15 May 2021 09:35:25 -0700 Guenter Roeck <linux@roeck-us.net> wrote:
> >
> > #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
> > static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
> ^^^^
> > unsigned long start, unsigned long end)
> > +{
> > + return flush_pmd_tlb_pwc_range(vma, start, end, false);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Doesn't that cause build warnings/errors all over the place ?
It will, thanks. I queued a fix.
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-15 20:41 ` Andrew Morton
@ 2021-05-15 23:05 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-15 23:05 UTC (permalink / raw)
To: Andrew Morton
Cc: Aneesh Kumar K.V, linux-mm, mpe, linuxppc-dev, kaleshsingh,
npiggin, joel, Christophe Leroy
On 5/15/21 1:41 PM, Andrew Morton wrote:
> On Sat, 15 May 2021 09:35:25 -0700 Guenter Roeck <linux@roeck-us.net> wrote:
>
>>>
>>> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
>>> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
>> ^^^^
>>> unsigned long start, unsigned long end)
>>> +{
>>> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>> Doesn't that cause build warnings/errors all over the place ?
>
> It will, thanks. I queued a fix.
>
Also in mm/mremap.c, in case you didn't see it:
#ifndef flush_pte_tlb_pwc_range
#define flush_pte_tlb_pwc_range flush_pte_tlb_pwc_range
static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
^^^^
unsigned long start,
unsigned long end)
{
return flush_tlb_range(vma, start, end);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
}
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-15 23:05 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-15 23:05 UTC (permalink / raw)
To: Andrew Morton
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, linuxppc-dev
On 5/15/21 1:41 PM, Andrew Morton wrote:
> On Sat, 15 May 2021 09:35:25 -0700 Guenter Roeck <linux@roeck-us.net> wrote:
>
>>>
>>> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
>>> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
>> ^^^^
>>> unsigned long start, unsigned long end)
>>> +{
>>> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>> Doesn't that cause build warnings/errors all over the place ?
>
> It will, thanks. I queued a fix.
>
Also in mm/mremap.c, in case you didn't see it:
#ifndef flush_pte_tlb_pwc_range
#define flush_pte_tlb_pwc_range flush_pte_tlb_pwc_range
static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
^^^^
unsigned long start,
unsigned long end)
{
return flush_tlb_range(vma, start, end);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
}
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-15 16:35 ` Guenter Roeck
@ 2021-05-17 8:40 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-17 8:40 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On 5/15/21 10:05 PM, Guenter Roeck wrote:
> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>> No functional change in this patch
>>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>> ---
>> .../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
>> arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
>> arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
>> arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
>> 4 files changed, 42 insertions(+), 33 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>> index 8b33601cdb9d..171441a43b35 100644
>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>> @@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
>> }
>> #endif
>>
>> -extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>> - unsigned long start, unsigned long end);
>> -extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
>> - unsigned long end, int psize);
>> -extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>> - unsigned long start, unsigned long end);
>> -extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>> +void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + bool flush_pwc);
>> +void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + bool flush_pwc);
>> +void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
>> + unsigned long end, int psize, bool flush_pwc);
>> +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>> unsigned long end);
>> -extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>> +void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>> +
>>
>> extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>> index 215973b4cb26..f9f8a3a264f7 100644
>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>> }
>>
>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
> ^^^^
>> + unsigned long start,
>> + unsigned long end,
>> + bool flush_pwc)
>> +{
>> + if (radix_enabled())
>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>> + return hash__flush_tlb_range(vma, start, end);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>> +}
In this specific case we won't have build errors because,
static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
But I agree the below is better to read.
static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
unsigned long start,
unsigned long end,
bool flush_pwc)
{
if (radix_enabled())
radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
else
hash__flush_tlb_range(vma, start, end);
return
}
>
>>
>> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
>> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
> ^^^^
>> unsigned long start, unsigned long end)
>> +{
>> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Doesn't that cause build warnings/errors all over the place ?
>
> Guenter
>
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-17 8:40 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-17 8:40 UTC (permalink / raw)
To: Guenter Roeck; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On 5/15/21 10:05 PM, Guenter Roeck wrote:
> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>> No functional change in this patch
>>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>> ---
>> .../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
>> arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
>> arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
>> arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
>> 4 files changed, 42 insertions(+), 33 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>> index 8b33601cdb9d..171441a43b35 100644
>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>> @@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
>> }
>> #endif
>>
>> -extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>> - unsigned long start, unsigned long end);
>> -extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
>> - unsigned long end, int psize);
>> -extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>> - unsigned long start, unsigned long end);
>> -extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>> +void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + bool flush_pwc);
>> +void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + bool flush_pwc);
>> +void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
>> + unsigned long end, int psize, bool flush_pwc);
>> +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>> unsigned long end);
>> -extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>> +void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>> +
>>
>> extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>> index 215973b4cb26..f9f8a3a264f7 100644
>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>> }
>>
>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
> ^^^^
>> + unsigned long start,
>> + unsigned long end,
>> + bool flush_pwc)
>> +{
>> + if (radix_enabled())
>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>> + return hash__flush_tlb_range(vma, start, end);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>> +}
In this specific case we won't have build errors because,
static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
But I agree the below is better to read.
static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
unsigned long start,
unsigned long end,
bool flush_pwc)
{
if (radix_enabled())
radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
else
hash__flush_tlb_range(vma, start, end);
return
}
>
>>
>> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
>> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
> ^^^^
>> unsigned long start, unsigned long end)
>> +{
>> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Doesn't that cause build warnings/errors all over the place ?
>
> Guenter
>
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-17 8:40 ` Aneesh Kumar K.V
@ 2021-05-17 13:38 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-17 13:38 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>>> No functional change in this patch
>>>
>>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>>> ---
>>> .../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
>>> arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
>>> arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
>>> arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
>>> 4 files changed, 42 insertions(+), 33 deletions(-)
>>>
>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>>> index 8b33601cdb9d..171441a43b35 100644
>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>>> @@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
>>> }
>>> #endif
>>> -extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>>> - unsigned long start, unsigned long end);
>>> -extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
>>> - unsigned long end, int psize);
>>> -extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>>> - unsigned long start, unsigned long end);
>>> -extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>>> +void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>>> + unsigned long start, unsigned long end,
>>> + bool flush_pwc);
>>> +void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>>> + unsigned long start, unsigned long end,
>>> + bool flush_pwc);
>>> +void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
>>> + unsigned long end, int psize, bool flush_pwc);
>>> +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>>> unsigned long end);
>>> -extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>>> +void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>>> +
>>> extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>> index 215973b4cb26..f9f8a3a264f7 100644
>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>> }
>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>> ^^^^
>>> + unsigned long start,
>>> + unsigned long end,
>>> + bool flush_pwc)
>>> +{
>>> + if (radix_enabled())
>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>> + return hash__flush_tlb_range(vma, start, end);
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>>> +}
>
> In this specific case we won't have build errors because,
>
> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
> unsigned long start, unsigned long end)
> {
>
Sorry, you completely lost me.
Building parisc:allnoconfig ... failed
--------------
Error log:
In file included from arch/parisc/include/asm/cacheflush.h:7,
from include/linux/highmem.h:12,
from include/linux/pagemap.h:11,
from include/linux/ksm.h:13,
from mm/mremap.c:14:
mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
Guenter
>
> But I agree the below is better to read.
>
> static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
> unsigned long start,
> unsigned long end,
> bool flush_pwc)
> {
> if (radix_enabled())
> radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
> else
> hash__flush_tlb_range(vma, start, end);
> return
> }
>
>>
>>> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
>>> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
>> ^^^^
>>> unsigned long start, unsigned long end)
>>> +{
>>> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>> Doesn't that cause build warnings/errors all over the place ?
>>
>> Guenter
>>
>
>
> -aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-17 13:38 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-17 13:38 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>>> No functional change in this patch
>>>
>>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>>> ---
>>> .../include/asm/book3s/64/tlbflush-radix.h | 19 +++++++-----
>>> arch/powerpc/include/asm/book3s/64/tlbflush.h | 23 ++++++++++++---
>>> arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 4 +--
>>> arch/powerpc/mm/book3s64/radix_tlb.c | 29 +++++++------------
>>> 4 files changed, 42 insertions(+), 33 deletions(-)
>>>
>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>>> index 8b33601cdb9d..171441a43b35 100644
>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
>>> @@ -56,15 +56,18 @@ static inline void radix__flush_all_lpid_guest(unsigned int lpid)
>>> }
>>> #endif
>>> -extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>>> - unsigned long start, unsigned long end);
>>> -extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
>>> - unsigned long end, int psize);
>>> -extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>>> - unsigned long start, unsigned long end);
>>> -extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>>> +void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,
>>> + unsigned long start, unsigned long end,
>>> + bool flush_pwc);
>>> +void radix__flush_pmd_tlb_range(struct vm_area_struct *vma,
>>> + unsigned long start, unsigned long end,
>>> + bool flush_pwc);
>>> +void radix__flush_tlb_pwc_range_psize(struct mm_struct *mm, unsigned long start,
>>> + unsigned long end, int psize, bool flush_pwc);
>>> +void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>>> unsigned long end);
>>> -extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>>> +void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end);
>>> +
>>> extern void radix__local_flush_tlb_mm(struct mm_struct *mm);
>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>> index 215973b4cb26..f9f8a3a264f7 100644
>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>> }
>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>> ^^^^
>>> + unsigned long start,
>>> + unsigned long end,
>>> + bool flush_pwc)
>>> +{
>>> + if (radix_enabled())
>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>> + return hash__flush_tlb_range(vma, start, end);
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>>> +}
>
> In this specific case we won't have build errors because,
>
> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
> unsigned long start, unsigned long end)
> {
>
Sorry, you completely lost me.
Building parisc:allnoconfig ... failed
--------------
Error log:
In file included from arch/parisc/include/asm/cacheflush.h:7,
from include/linux/highmem.h:12,
from include/linux/pagemap.h:11,
from include/linux/ksm.h:13,
from mm/mremap.c:14:
mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
Guenter
>
> But I agree the below is better to read.
>
> static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
> unsigned long start,
> unsigned long end,
> bool flush_pwc)
> {
> if (radix_enabled())
> radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
> else
> hash__flush_tlb_range(vma, start, end);
> return
> }
>
>>
>>> #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
>>> static inline void flush_pmd_tlb_range(struct vm_area_struct *vma,
>> ^^^^
>>> unsigned long start, unsigned long end)
>>> +{
>>> + return flush_pmd_tlb_pwc_range(vma, start, end, false);
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>
>> Doesn't that cause build warnings/errors all over the place ?
>>
>> Guenter
>>
>
>
> -aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-17 13:38 ` Guenter Roeck
@ 2021-05-17 13:55 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-17 13:55 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
Guenter Roeck <linux@roeck-us.net> writes:
> On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
>> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
...
>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>> index 215973b4cb26..f9f8a3a264f7 100644
>>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>>> }
>>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>>> ^^^^
>>>> + unsigned long start,
>>>> + unsigned long end,
>>>> + bool flush_pwc)
>>>> +{
>>>> + if (radix_enabled())
>>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>>> + return hash__flush_tlb_range(vma, start, end);
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>
>>>> +}
>>
>> In this specific case we won't have build errors because,
>>
>> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
>> unsigned long start, unsigned long end)
>> {
>>
>
> Sorry, you completely lost me.
>
> Building parisc:allnoconfig ... failed
> --------------
> Error log:
> In file included from arch/parisc/include/asm/cacheflush.h:7,
> from include/linux/highmem.h:12,
> from include/linux/pagemap.h:11,
> from include/linux/ksm.h:13,
> from mm/mremap.c:14:
> mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
> arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
As replied here
https://lore.kernel.org/mm-commits/8eedb441-a612-1ec8-8bf7-b40184de9f6f@linux.ibm.com/
That was the generic header change in the patch. I was commenting about the
ppc64 specific change causing build failures.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-17 13:55 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-17 13:55 UTC (permalink / raw)
To: Guenter Roeck; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
Guenter Roeck <linux@roeck-us.net> writes:
> On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
>> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
...
>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>> index 215973b4cb26..f9f8a3a264f7 100644
>>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>>> }
>>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>>> ^^^^
>>>> + unsigned long start,
>>>> + unsigned long end,
>>>> + bool flush_pwc)
>>>> +{
>>>> + if (radix_enabled())
>>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>>> + return hash__flush_tlb_range(vma, start, end);
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>
>>>> +}
>>
>> In this specific case we won't have build errors because,
>>
>> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
>> unsigned long start, unsigned long end)
>> {
>>
>
> Sorry, you completely lost me.
>
> Building parisc:allnoconfig ... failed
> --------------
> Error log:
> In file included from arch/parisc/include/asm/cacheflush.h:7,
> from include/linux/highmem.h:12,
> from include/linux/pagemap.h:11,
> from include/linux/ksm.h:13,
> from mm/mremap.c:14:
> mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
> arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
As replied here
https://lore.kernel.org/mm-commits/8eedb441-a612-1ec8-8bf7-b40184de9f6f@linux.ibm.com/
That was the generic header change in the patch. I was commenting about the
ppc64 specific change causing build failures.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-17 13:55 ` Aneesh Kumar K.V
@ 2021-05-17 14:18 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-17 14:18 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, akpm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On 5/17/21 6:55 AM, Aneesh Kumar K.V wrote:
> Guenter Roeck <linux@roeck-us.net> writes:
>
>> On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
>>> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>>>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>
> ...
>
>>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>> index 215973b4cb26..f9f8a3a264f7 100644
>>>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>>>> }
>>>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>>>> ^^^^
>>>>> + unsigned long start,
>>>>> + unsigned long end,
>>>>> + bool flush_pwc)
>>>>> +{
>>>>> + if (radix_enabled())
>>>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>>>> + return hash__flush_tlb_range(vma, start, end);
>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>
>>>>> +}
>>>
>>> In this specific case we won't have build errors because,
>>>
>>> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
>>> unsigned long start, unsigned long end)
>>> {
>>>
>>
>> Sorry, you completely lost me.
>>
>> Building parisc:allnoconfig ... failed
>> --------------
>> Error log:
>> In file included from arch/parisc/include/asm/cacheflush.h:7,
>> from include/linux/highmem.h:12,
>> from include/linux/pagemap.h:11,
>> from include/linux/ksm.h:13,
>> from mm/mremap.c:14:
>> mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
>> arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
>
> As replied here
> https://lore.kernel.org/mm-commits/8eedb441-a612-1ec8-8bf7-b40184de9f6f@linux.ibm.com/
>
> That was the generic header change in the patch. I was commenting about the
> ppc64 specific change causing build failures.
>
Ah, sorry. I wasn't aware that the following is valid C code
void f1()
{
return f2();
^^^^^^
}
as long as f2() is void as well. Confusing, but we live and learn.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-17 14:18 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-17 14:18 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On 5/17/21 6:55 AM, Aneesh Kumar K.V wrote:
> Guenter Roeck <linux@roeck-us.net> writes:
>
>> On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
>>> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>>>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>
> ...
>
>>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>> index 215973b4cb26..f9f8a3a264f7 100644
>>>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>>>> }
>>>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>>>> ^^^^
>>>>> + unsigned long start,
>>>>> + unsigned long end,
>>>>> + bool flush_pwc)
>>>>> +{
>>>>> + if (radix_enabled())
>>>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>>>> + return hash__flush_tlb_range(vma, start, end);
>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>
>>>>> +}
>>>
>>> In this specific case we won't have build errors because,
>>>
>>> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
>>> unsigned long start, unsigned long end)
>>> {
>>>
>>
>> Sorry, you completely lost me.
>>
>> Building parisc:allnoconfig ... failed
>> --------------
>> Error log:
>> In file included from arch/parisc/include/asm/cacheflush.h:7,
>> from include/linux/highmem.h:12,
>> from include/linux/pagemap.h:11,
>> from include/linux/ksm.h:13,
>> from mm/mremap.c:14:
>> mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
>> arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
>
> As replied here
> https://lore.kernel.org/mm-commits/8eedb441-a612-1ec8-8bf7-b40184de9f6f@linux.ibm.com/
>
> That was the generic header change in the patch. I was commenting about the
> ppc64 specific change causing build failures.
>
Ah, sorry. I wasn't aware that the following is valid C code
void f1()
{
return f2();
^^^^^^
}
as long as f2() is void as well. Confusing, but we live and learn.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-17 14:18 ` Guenter Roeck
@ 2021-05-19 0:26 ` Michael Ellerman
-1 siblings, 0 replies; 106+ messages in thread
From: Michael Ellerman @ 2021-05-19 0:26 UTC (permalink / raw)
To: Guenter Roeck, Aneesh Kumar K.V
Cc: linux-mm, akpm, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
Guenter Roeck <linux@roeck-us.net> writes:
> On 5/17/21 6:55 AM, Aneesh Kumar K.V wrote:
>> Guenter Roeck <linux@roeck-us.net> writes:
>>
>>> On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
>>>> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>>>>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>>
>> ...
>>
>>>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>>>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>>> index 215973b4cb26..f9f8a3a264f7 100644
>>>>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>>>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>>>>> }
>>>>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>>>>> ^^^^
>>>>>> + unsigned long start,
>>>>>> + unsigned long end,
>>>>>> + bool flush_pwc)
>>>>>> +{
>>>>>> + if (radix_enabled())
>>>>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>>>>> + return hash__flush_tlb_range(vma, start, end);
>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>
>>>>>> +}
>>>>
>>>> In this specific case we won't have build errors because,
>>>>
>>>> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
>>>> unsigned long start, unsigned long end)
>>>> {
>>>>
>>>
>>> Sorry, you completely lost me.
>>>
>>> Building parisc:allnoconfig ... failed
>>> --------------
>>> Error log:
>>> In file included from arch/parisc/include/asm/cacheflush.h:7,
>>> from include/linux/highmem.h:12,
>>> from include/linux/pagemap.h:11,
>>> from include/linux/ksm.h:13,
>>> from mm/mremap.c:14:
>>> mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
>>> arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
>>
>> As replied here
>> https://lore.kernel.org/mm-commits/8eedb441-a612-1ec8-8bf7-b40184de9f6f@linux.ibm.com/
>>
>> That was the generic header change in the patch. I was commenting about the
>> ppc64 specific change causing build failures.
>
> Ah, sorry. I wasn't aware that the following is valid C code
>
> void f1()
> {
> return f2();
> ^^^^^^
> }
>
> as long as f2() is void as well. Confusing, but we live and learn.
It might be valid, but it's still bad IMHO.
It's confusing to readers, and serves no useful purpose.
cheers
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-19 0:26 ` Michael Ellerman
0 siblings, 0 replies; 106+ messages in thread
From: Michael Ellerman @ 2021-05-19 0:26 UTC (permalink / raw)
To: Guenter Roeck, Aneesh Kumar K.V
Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
Guenter Roeck <linux@roeck-us.net> writes:
> On 5/17/21 6:55 AM, Aneesh Kumar K.V wrote:
>> Guenter Roeck <linux@roeck-us.net> writes:
>>
>>> On 5/17/21 1:40 AM, Aneesh Kumar K.V wrote:
>>>> On 5/15/21 10:05 PM, Guenter Roeck wrote:
>>>>> On Thu, Apr 22, 2021 at 11:13:19AM +0530, Aneesh Kumar K.V wrote:
>>
>> ...
>>
>>>>> extern void radix__local_flush_all_mm(struct mm_struct *mm);
>>>>>> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>>> index 215973b4cb26..f9f8a3a264f7 100644
>>>>>> --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>>> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
>>>>>> @@ -45,13 +45,30 @@ static inline void tlbiel_all_lpid(bool radix)
>>>>>> hash__tlbiel_all(TLB_INVAL_SCOPE_LPID);
>>>>>> }
>>>>>> +static inline void flush_pmd_tlb_pwc_range(struct vm_area_struct *vma,
>>>>> ^^^^
>>>>>> + unsigned long start,
>>>>>> + unsigned long end,
>>>>>> + bool flush_pwc)
>>>>>> +{
>>>>>> + if (radix_enabled())
>>>>>> + return radix__flush_pmd_tlb_range(vma, start, end, flush_pwc);
>>>>>> + return hash__flush_tlb_range(vma, start, end);
>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>
>>>>>> +}
>>>>
>>>> In this specific case we won't have build errors because,
>>>>
>>>> static inline void hash__flush_tlb_range(struct vm_area_struct *vma,
>>>> unsigned long start, unsigned long end)
>>>> {
>>>>
>>>
>>> Sorry, you completely lost me.
>>>
>>> Building parisc:allnoconfig ... failed
>>> --------------
>>> Error log:
>>> In file included from arch/parisc/include/asm/cacheflush.h:7,
>>> from include/linux/highmem.h:12,
>>> from include/linux/pagemap.h:11,
>>> from include/linux/ksm.h:13,
>>> from mm/mremap.c:14:
>>> mm/mremap.c: In function 'flush_pte_tlb_pwc_range':
>>> arch/parisc/include/asm/tlbflush.h:20:2: error: 'return' with a value, in function returning void
>>
>> As replied here
>> https://lore.kernel.org/mm-commits/8eedb441-a612-1ec8-8bf7-b40184de9f6f@linux.ibm.com/
>>
>> That was the generic header change in the patch. I was commenting about the
>> ppc64 specific change causing build failures.
>
> Ah, sorry. I wasn't aware that the following is valid C code
>
> void f1()
> {
> return f2();
> ^^^^^^
> }
>
> as long as f2() is void as well. Confusing, but we live and learn.
It might be valid, but it's still bad IMHO.
It's confusing to readers, and serves no useful purpose.
cheers
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 0:26 ` Michael Ellerman
@ 2021-05-19 0:45 ` Segher Boessenkool
-1 siblings, 0 replies; 106+ messages in thread
From: Segher Boessenkool @ 2021-05-19 0:45 UTC (permalink / raw)
To: Michael Ellerman
Cc: Guenter Roeck, Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh,
joel, akpm, linuxppc-dev
On Wed, May 19, 2021 at 10:26:22AM +1000, Michael Ellerman wrote:
> Guenter Roeck <linux@roeck-us.net> writes:
> > Ah, sorry. I wasn't aware that the following is valid C code
> >
> > void f1()
> > {
> > return f2();
> > ^^^^^^
> > }
> >
> > as long as f2() is void as well. Confusing, but we live and learn.
>
> It might be valid, but it's still bad IMHO.
>
> It's confusing to readers, and serves no useful purpose.
And it actually explicitly is undefined behaviour in C90 already
(3.6.6.4 in C90, 6.8.6.4 in C99 and later).
Segher
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-19 0:45 ` Segher Boessenkool
0 siblings, 0 replies; 106+ messages in thread
From: Segher Boessenkool @ 2021-05-19 0:45 UTC (permalink / raw)
To: Michael Ellerman
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev, Guenter Roeck
On Wed, May 19, 2021 at 10:26:22AM +1000, Michael Ellerman wrote:
> Guenter Roeck <linux@roeck-us.net> writes:
> > Ah, sorry. I wasn't aware that the following is valid C code
> >
> > void f1()
> > {
> > return f2();
> > ^^^^^^
> > }
> >
> > as long as f2() is void as well. Confusing, but we live and learn.
>
> It might be valid, but it's still bad IMHO.
>
> It's confusing to readers, and serves no useful purpose.
And it actually explicitly is undefined behaviour in C90 already
(3.6.6.4 in C90, 6.8.6.4 in C99 and later).
Segher
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 0:45 ` Segher Boessenkool
(?)
@ 2021-05-19 12:03 ` Segher Boessenkool
2021-05-19 13:37 ` Guenter Roeck
2021-05-20 7:37 ` Michael Ellerman
-1 siblings, 2 replies; 106+ messages in thread
From: Segher Boessenkool @ 2021-05-19 12:03 UTC (permalink / raw)
To: Michael Ellerman
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev, Guenter Roeck
On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
> On Wed, May 19, 2021 at 10:26:22AM +1000, Michael Ellerman wrote:
> > Guenter Roeck <linux@roeck-us.net> writes:
> > > Ah, sorry. I wasn't aware that the following is valid C code
> > >
> > > void f1()
> > > {
> > > return f2();
> > > ^^^^^^
> > > }
> > >
> > > as long as f2() is void as well. Confusing, but we live and learn.
> >
> > It might be valid, but it's still bad IMHO.
> >
> > It's confusing to readers, and serves no useful purpose.
>
> And it actually explicitly is undefined behaviour in C90 already
> (3.6.6.4 in C90, 6.8.6.4 in C99 and later).
... but there is a GCC extension that allows this by default:
<https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
For C only, warn about a 'return' statement with an expression in a
function whose return type is 'void', unless the expression type is
also 'void'. As a GNU extension, the latter case is accepted
without a warning unless '-Wpedantic' is used.
Segher
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 12:03 ` Segher Boessenkool
@ 2021-05-19 13:37 ` Guenter Roeck
2021-05-19 14:20 ` Segher Boessenkool
2021-05-20 7:37 ` Michael Ellerman
1 sibling, 1 reply; 106+ messages in thread
From: Guenter Roeck @ 2021-05-19 13:37 UTC (permalink / raw)
To: Segher Boessenkool, Michael Ellerman
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev
On 5/19/21 5:03 AM, Segher Boessenkool wrote:
> On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
>> On Wed, May 19, 2021 at 10:26:22AM +1000, Michael Ellerman wrote:
>>> Guenter Roeck <linux@roeck-us.net> writes:
>>>> Ah, sorry. I wasn't aware that the following is valid C code
>>>>
>>>> void f1()
>>>> {
>>>> return f2();
>>>> ^^^^^^
>>>> }
>>>>
>>>> as long as f2() is void as well. Confusing, but we live and learn.
>>>
>>> It might be valid, but it's still bad IMHO.
>>>
>>> It's confusing to readers, and serves no useful purpose.
>>
>> And it actually explicitly is undefined behaviour in C90 already
>> (3.6.6.4 in C90, 6.8.6.4 in C99 and later).
>
> ... but there is a GCC extension that allows this by default:
> <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> For C only, warn about a 'return' statement with an expression in a
> function whose return type is 'void', unless the expression type is
> also 'void'. As a GNU extension, the latter case is accepted
> without a warning unless '-Wpedantic' is used.
>
In C99:
"6.8.6.4 The return statement
Constraints
A return statement with an expression shall not appear in a function whose return type
is void. A return statement without an expression shall only appear in a function
whose return type is void."
Sounds like invalid to me, not just undefined behavior.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 13:37 ` Guenter Roeck
@ 2021-05-19 14:20 ` Segher Boessenkool
0 siblings, 0 replies; 106+ messages in thread
From: Segher Boessenkool @ 2021-05-19 14:20 UTC (permalink / raw)
To: Guenter Roeck
Cc: Michael Ellerman, Aneesh Kumar K.V, npiggin, linux-mm,
kaleshsingh, joel, akpm, linuxppc-dev
On Wed, May 19, 2021 at 06:37:44AM -0700, Guenter Roeck wrote:
> On 5/19/21 5:03 AM, Segher Boessenkool wrote:
> >On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
> >>And it actually explicitly is undefined behaviour in C90 already
> >>(3.6.6.4 in C90, 6.8.6.4 in C99 and later).
> >
> >... but there is a GCC extension that allows this by default:
> ><https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> > For C only, warn about a 'return' statement with an expression in a
> > function whose return type is 'void', unless the expression type is
> > also 'void'. As a GNU extension, the latter case is accepted
> > without a warning unless '-Wpedantic' is used.
>
> In C99:
>
> "6.8.6.4 The return statement
> Constraints
>
> A return statement with an expression shall not appear in a function whose
> return type
> is void. A return statement without an expression shall only appear in a
> function
> whose return type is void."
>
> Sounds like invalid to me, not just undefined behavior.
I don't know what "invalid" would mean here other than UB, it isn't a
specific defined term, unlike the latter, which is precisely defined in
3.4.3/1:
undefined behavior
behavior, upon use of a nonportable or erroneous program construct or
of erroneous data, for which this International Standard imposes no
requirements
This is the strongest thing the standard can say, it is not Law, it does
not prohibit anyone from doing anything :-)
"Shall" and "shall not" X means it is undefined behaviour if X (or its
inverse) is violated. See 4.2:
If a ''shall'' or ''shall not'' requirement that appears outside of a
constraint or runtime-constraint is violated, the behavior is
undefined. Undefined behavior is otherwise indicated in this
International Standard by the words ''undefined behavior'' or by the
omission of any explicit definition of behavior. There is no
difference in emphasis among these three; they all describe ''behavior
that is undefined''.
which also explains that what you call "invalid" has undefined behaviour
just as well, most likely.
Segher
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-19 14:20 ` Segher Boessenkool
0 siblings, 0 replies; 106+ messages in thread
From: Segher Boessenkool @ 2021-05-19 14:20 UTC (permalink / raw)
To: Guenter Roeck
Cc: npiggin, linux-mm, Aneesh Kumar K.V, kaleshsingh, joel, akpm,
linuxppc-dev
On Wed, May 19, 2021 at 06:37:44AM -0700, Guenter Roeck wrote:
> On 5/19/21 5:03 AM, Segher Boessenkool wrote:
> >On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
> >>And it actually explicitly is undefined behaviour in C90 already
> >>(3.6.6.4 in C90, 6.8.6.4 in C99 and later).
> >
> >... but there is a GCC extension that allows this by default:
> ><https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> > For C only, warn about a 'return' statement with an expression in a
> > function whose return type is 'void', unless the expression type is
> > also 'void'. As a GNU extension, the latter case is accepted
> > without a warning unless '-Wpedantic' is used.
>
> In C99:
>
> "6.8.6.4 The return statement
> Constraints
>
> A return statement with an expression shall not appear in a function whose
> return type
> is void. A return statement without an expression shall only appear in a
> function
> whose return type is void."
>
> Sounds like invalid to me, not just undefined behavior.
I don't know what "invalid" would mean here other than UB, it isn't a
specific defined term, unlike the latter, which is precisely defined in
3.4.3/1:
undefined behavior
behavior, upon use of a nonportable or erroneous program construct or
of erroneous data, for which this International Standard imposes no
requirements
This is the strongest thing the standard can say, it is not Law, it does
not prohibit anyone from doing anything :-)
"Shall" and "shall not" X means it is undefined behaviour if X (or its
inverse) is violated. See 4.2:
If a ''shall'' or ''shall not'' requirement that appears outside of a
constraint or runtime-constraint is violated, the behavior is
undefined. Undefined behavior is otherwise indicated in this
International Standard by the words ''undefined behavior'' or by the
omission of any explicit definition of behavior. There is no
difference in emphasis among these three; they all describe ''behavior
that is undefined''.
which also explains that what you call "invalid" has undefined behaviour
just as well, most likely.
Segher
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 14:20 ` Segher Boessenkool
@ 2021-05-19 15:28 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-19 15:28 UTC (permalink / raw)
To: Segher Boessenkool
Cc: Michael Ellerman, Aneesh Kumar K.V, npiggin, linux-mm,
kaleshsingh, joel, akpm, linuxppc-dev
On Wed, May 19, 2021 at 09:20:38AM -0500, Segher Boessenkool wrote:
> On Wed, May 19, 2021 at 06:37:44AM -0700, Guenter Roeck wrote:
> > On 5/19/21 5:03 AM, Segher Boessenkool wrote:
> > >On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
> > >>And it actually explicitly is undefined behaviour in C90 already
> > >>(3.6.6.4 in C90, 6.8.6.4 in C99 and later).
> > >
> > >... but there is a GCC extension that allows this by default:
> > ><https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> > > For C only, warn about a 'return' statement with an expression in a
> > > function whose return type is 'void', unless the expression type is
> > > also 'void'. As a GNU extension, the latter case is accepted
> > > without a warning unless '-Wpedantic' is used.
> >
> > In C99:
> >
> > "6.8.6.4 The return statement
> > Constraints
> >
> > A return statement with an expression shall not appear in a function whose
> > return type
> > is void. A return statement without an expression shall only appear in a
> > function
> > whose return type is void."
> >
> > Sounds like invalid to me, not just undefined behavior.
>
> I don't know what "invalid" would mean here other than UB, it isn't a
> specific defined term, unlike the latter, which is precisely defined in
> 3.4.3/1:
> undefined behavior
> behavior, upon use of a nonportable or erroneous program construct or
> of erroneous data, for which this International Standard imposes no
> requirements
>
> This is the strongest thing the standard can say, it is not Law, it does
> not prohibit anyone from doing anything :-)
>
> "Shall" and "shall not" X means it is undefined behaviour if X (or its
> inverse) is violated. See 4.2:
> If a ''shall'' or ''shall not'' requirement that appears outside of a
> constraint or runtime-constraint is violated, the behavior is
> undefined. Undefined behavior is otherwise indicated in this
> International Standard by the words ''undefined behavior'' or by the
> omission of any explicit definition of behavior. There is no
> difference in emphasis among these three; they all describe ''behavior
> that is undefined''.
> which also explains that what you call "invalid" has undefined behaviour
> just as well, most likely.
>
I'd have assumed that "shall not" is syntactically wrong, but I stand
corrected.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-19 15:28 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-19 15:28 UTC (permalink / raw)
To: Segher Boessenkool
Cc: npiggin, linux-mm, Aneesh Kumar K.V, kaleshsingh, joel, akpm,
linuxppc-dev
On Wed, May 19, 2021 at 09:20:38AM -0500, Segher Boessenkool wrote:
> On Wed, May 19, 2021 at 06:37:44AM -0700, Guenter Roeck wrote:
> > On 5/19/21 5:03 AM, Segher Boessenkool wrote:
> > >On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
> > >>And it actually explicitly is undefined behaviour in C90 already
> > >>(3.6.6.4 in C90, 6.8.6.4 in C99 and later).
> > >
> > >... but there is a GCC extension that allows this by default:
> > ><https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> > > For C only, warn about a 'return' statement with an expression in a
> > > function whose return type is 'void', unless the expression type is
> > > also 'void'. As a GNU extension, the latter case is accepted
> > > without a warning unless '-Wpedantic' is used.
> >
> > In C99:
> >
> > "6.8.6.4 The return statement
> > Constraints
> >
> > A return statement with an expression shall not appear in a function whose
> > return type
> > is void. A return statement without an expression shall only appear in a
> > function
> > whose return type is void."
> >
> > Sounds like invalid to me, not just undefined behavior.
>
> I don't know what "invalid" would mean here other than UB, it isn't a
> specific defined term, unlike the latter, which is precisely defined in
> 3.4.3/1:
> undefined behavior
> behavior, upon use of a nonportable or erroneous program construct or
> of erroneous data, for which this International Standard imposes no
> requirements
>
> This is the strongest thing the standard can say, it is not Law, it does
> not prohibit anyone from doing anything :-)
>
> "Shall" and "shall not" X means it is undefined behaviour if X (or its
> inverse) is violated. See 4.2:
> If a ''shall'' or ''shall not'' requirement that appears outside of a
> constraint or runtime-constraint is violated, the behavior is
> undefined. Undefined behavior is otherwise indicated in this
> International Standard by the words ''undefined behavior'' or by the
> omission of any explicit definition of behavior. There is no
> difference in emphasis among these three; they all describe ''behavior
> that is undefined''.
> which also explains that what you call "invalid" has undefined behaviour
> just as well, most likely.
>
I'd have assumed that "shall not" is syntactically wrong, but I stand
corrected.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 12:03 ` Segher Boessenkool
2021-05-19 13:37 ` Guenter Roeck
@ 2021-05-20 7:37 ` Michael Ellerman
2021-05-20 12:17 ` Segher Boessenkool
1 sibling, 1 reply; 106+ messages in thread
From: Michael Ellerman @ 2021-05-20 7:37 UTC (permalink / raw)
To: Segher Boessenkool
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev, Guenter Roeck
Segher Boessenkool <segher@kernel.crashing.org> writes:
> On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
>> On Wed, May 19, 2021 at 10:26:22AM +1000, Michael Ellerman wrote:
>> > Guenter Roeck <linux@roeck-us.net> writes:
>> > > Ah, sorry. I wasn't aware that the following is valid C code
>> > >
>> > > void f1()
>> > > {
>> > > return f2();
>> > > ^^^^^^
>> > > }
>> > >
>> > > as long as f2() is void as well. Confusing, but we live and learn.
>> >
>> > It might be valid, but it's still bad IMHO.
>> >
>> > It's confusing to readers, and serves no useful purpose.
>>
>> And it actually explicitly is undefined behaviour in C90 already
>> (3.6.6.4 in C90, 6.8.6.4 in C99 and later).
We use gnu89, which presumably does not make it UB.
> ... but there is a GCC extension that allows this by default:
> <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> For C only, warn about a 'return' statement with an expression in a
> function whose return type is 'void', unless the expression type is
> also 'void'. As a GNU extension, the latter case is accepted
> without a warning unless '-Wpedantic' is used.
There's no chance we'll ever enable -Wpedantic, so I guess it's allowed
for practical purposes. I guess clang must accept it too or we'd be
seeing warnings from it.
cheers
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-20 7:37 ` Michael Ellerman
@ 2021-05-20 12:17 ` Segher Boessenkool
0 siblings, 0 replies; 106+ messages in thread
From: Segher Boessenkool @ 2021-05-20 12:17 UTC (permalink / raw)
To: Michael Ellerman
Cc: Aneesh Kumar K.V, npiggin, linux-mm, kaleshsingh, joel, akpm,
linuxppc-dev, Guenter Roeck
Hi!
On Thu, May 20, 2021 at 05:37:20PM +1000, Michael Ellerman wrote:
> Segher Boessenkool <segher@kernel.crashing.org> writes:
> > On Tue, May 18, 2021 at 07:45:14PM -0500, Segher Boessenkool wrote:
> >> On Wed, May 19, 2021 at 10:26:22AM +1000, Michael Ellerman wrote:
> >> > Guenter Roeck <linux@roeck-us.net> writes:
> >> > > Ah, sorry. I wasn't aware that the following is valid C code
> >> > >
> >> > > void f1()
> >> > > {
> >> > > return f2();
> >> > > ^^^^^^
> >> > > }
> >> > >
> >> > > as long as f2() is void as well. Confusing, but we live and learn.
> >> >
> >> > It might be valid, but it's still bad IMHO.
> >> >
> >> > It's confusing to readers, and serves no useful purpose.
> >>
> >> And it actually explicitly is undefined behaviour in C90 already
> >> (3.6.6.4 in C90, 6.8.6.4 in C99 and later).
>
> We use gnu89, which presumably does not make it UB.
Indeed. That is kind of implied by the "as a GNU extension" below, but
some explicit statement would be better, yup.
> > ... but there is a GCC extension that allows this by default:
> > <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wreturn-type>
> > For C only, warn about a 'return' statement with an expression in a
> > function whose return type is 'void', unless the expression type is
> > also 'void'. As a GNU extension, the latter case is accepted
> > without a warning unless '-Wpedantic' is used.
>
> There's no chance we'll ever enable -Wpedantic,
Good, because -pedantic adds a lot of much more annoying warnings as
well. I find this extension questionable (like Guenter says it is
confusing and has no purpose), so the only thing it is "good" for is it
causes long email threads ;-)
Other than those things it is harmless though.
> so I guess it's allowed
> for practical purposes. I guess clang must accept it too or we'd be
> seeing warnings from it.
Yup.
Segher
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 0:26 ` Michael Ellerman
@ 2021-05-19 1:08 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-19 1:08 UTC (permalink / raw)
To: Michael Ellerman, Aneesh Kumar K.V
Cc: linux-mm, akpm, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On 5/18/21 5:26 PM, Michael Ellerman wrote:
[ ... ]
>>> That was the generic header change in the patch. I was commenting about the
>>> ppc64 specific change causing build failures.
>>
>> Ah, sorry. I wasn't aware that the following is valid C code
>>
>> void f1()
>> {
>> return f2();
>> ^^^^^^
>> }
>>
>> as long as f2() is void as well. Confusing, but we live and learn.
>
> It might be valid, but it's still bad IMHO.
>
> It's confusing to readers, and serves no useful purpose.
>
Agreed, but it is surprisingly wide-spread. Try to run the coccinelle
script below, just for fun. The script doesn't even catch instances
in include files, yet there are more than 450 hits.
Guenter
---
virtual report
@d@
identifier f;
expression e;
position p;
@@
void f(...)
{
<...
return e@p;
...>
}
@script:python depends on report@
f << d.f;
p << d.p;
@@
print "void function %s:%s() with non-void return in line %s" % (p[0].file, f, p[0].line)
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-19 1:08 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-19 1:08 UTC (permalink / raw)
To: Michael Ellerman, Aneesh Kumar K.V
Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On 5/18/21 5:26 PM, Michael Ellerman wrote:
[ ... ]
>>> That was the generic header change in the patch. I was commenting about the
>>> ppc64 specific change causing build failures.
>>
>> Ah, sorry. I wasn't aware that the following is valid C code
>>
>> void f1()
>> {
>> return f2();
>> ^^^^^^
>> }
>>
>> as long as f2() is void as well. Confusing, but we live and learn.
>
> It might be valid, but it's still bad IMHO.
>
> It's confusing to readers, and serves no useful purpose.
>
Agreed, but it is surprisingly wide-spread. Try to run the coccinelle
script below, just for fun. The script doesn't even catch instances
in include files, yet there are more than 450 hits.
Guenter
---
virtual report
@d@
identifier f;
expression e;
position p;
@@
void f(...)
{
<...
return e@p;
...>
}
@script:python depends on report@
f << d.f;
p << d.p;
@@
print "void function %s:%s() with non-void return in line %s" % (p[0].file, f, p[0].line)
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-19 1:08 ` Guenter Roeck
@ 2021-05-20 11:38 ` Michael Ellerman
-1 siblings, 0 replies; 106+ messages in thread
From: Michael Ellerman @ 2021-05-20 11:38 UTC (permalink / raw)
To: Guenter Roeck, Aneesh Kumar K.V
Cc: linux-mm, akpm, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
Guenter Roeck <linux@roeck-us.net> writes:
> On 5/18/21 5:26 PM, Michael Ellerman wrote:
> [ ... ]
>>>> That was the generic header change in the patch. I was commenting about the
>>>> ppc64 specific change causing build failures.
>>>
>>> Ah, sorry. I wasn't aware that the following is valid C code
>>>
>>> void f1()
>>> {
>>> return f2();
>>> ^^^^^^
>>> }
>>>
>>> as long as f2() is void as well. Confusing, but we live and learn.
>>
>> It might be valid, but it's still bad IMHO.
>>
>> It's confusing to readers, and serves no useful purpose.
>>
>
> Agreed, but it is surprisingly wide-spread. Try to run the coccinelle
> script below, just for fun. The script doesn't even catch instances
> in include files, yet there are more than 450 hits.
Yikes, that is a lot.
I guess they're pretty harmless, but would be nice to clean them up
eventually.
Why doesn't the script work for instances in headers?
cheers
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-20 11:38 ` Michael Ellerman
0 siblings, 0 replies; 106+ messages in thread
From: Michael Ellerman @ 2021-05-20 11:38 UTC (permalink / raw)
To: Guenter Roeck, Aneesh Kumar K.V
Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
Guenter Roeck <linux@roeck-us.net> writes:
> On 5/18/21 5:26 PM, Michael Ellerman wrote:
> [ ... ]
>>>> That was the generic header change in the patch. I was commenting about the
>>>> ppc64 specific change causing build failures.
>>>
>>> Ah, sorry. I wasn't aware that the following is valid C code
>>>
>>> void f1()
>>> {
>>> return f2();
>>> ^^^^^^
>>> }
>>>
>>> as long as f2() is void as well. Confusing, but we live and learn.
>>
>> It might be valid, but it's still bad IMHO.
>>
>> It's confusing to readers, and serves no useful purpose.
>>
>
> Agreed, but it is surprisingly wide-spread. Try to run the coccinelle
> script below, just for fun. The script doesn't even catch instances
> in include files, yet there are more than 450 hits.
Yikes, that is a lot.
I guess they're pretty harmless, but would be nice to clean them up
eventually.
Why doesn't the script work for instances in headers?
cheers
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
2021-05-20 11:38 ` Michael Ellerman
@ 2021-05-20 11:56 ` Guenter Roeck
-1 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-20 11:56 UTC (permalink / raw)
To: Michael Ellerman, Aneesh Kumar K.V
Cc: linux-mm, akpm, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On 5/20/21 4:38 AM, Michael Ellerman wrote:
> Guenter Roeck <linux@roeck-us.net> writes:
>> On 5/18/21 5:26 PM, Michael Ellerman wrote:
>> [ ... ]
>>>>> That was the generic header change in the patch. I was commenting about the
>>>>> ppc64 specific change causing build failures.
>>>>
>>>> Ah, sorry. I wasn't aware that the following is valid C code
>>>>
>>>> void f1()
>>>> {
>>>> return f2();
>>>> ^^^^^^
>>>> }
>>>>
>>>> as long as f2() is void as well. Confusing, but we live and learn.
>>>
>>> It might be valid, but it's still bad IMHO.
>>>
>>> It's confusing to readers, and serves no useful purpose.
>>>
>>
>> Agreed, but it is surprisingly wide-spread. Try to run the coccinelle
>> script below, just for fun. The script doesn't even catch instances
>> in include files, yet there are more than 450 hits.
>
> Yikes, that is a lot.
>
> I guess they're pretty harmless, but would be nice to clean them up
> eventually.
>
> Why doesn't the script work for instances in headers?
>
Ah, that is one of those Coccinelle details. No idea. I run the script with
make coccicheck COCCI="return-void.cocci" MODE=report M=.
Probably there is a better way to invoke it which does handle include files.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 5/9] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument
@ 2021-05-20 11:56 ` Guenter Roeck
0 siblings, 0 replies; 106+ messages in thread
From: Guenter Roeck @ 2021-05-20 11:56 UTC (permalink / raw)
To: Michael Ellerman, Aneesh Kumar K.V
Cc: npiggin, linux-mm, kaleshsingh, joel, akpm, linuxppc-dev
On 5/20/21 4:38 AM, Michael Ellerman wrote:
> Guenter Roeck <linux@roeck-us.net> writes:
>> On 5/18/21 5:26 PM, Michael Ellerman wrote:
>> [ ... ]
>>>>> That was the generic header change in the patch. I was commenting about the
>>>>> ppc64 specific change causing build failures.
>>>>
>>>> Ah, sorry. I wasn't aware that the following is valid C code
>>>>
>>>> void f1()
>>>> {
>>>> return f2();
>>>> ^^^^^^
>>>> }
>>>>
>>>> as long as f2() is void as well. Confusing, but we live and learn.
>>>
>>> It might be valid, but it's still bad IMHO.
>>>
>>> It's confusing to readers, and serves no useful purpose.
>>>
>>
>> Agreed, but it is surprisingly wide-spread. Try to run the coccinelle
>> script below, just for fun. The script doesn't even catch instances
>> in include files, yet there are more than 450 hits.
>
> Yikes, that is a lot.
>
> I guess they're pretty harmless, but would be nice to clean them up
> eventually.
>
> Why doesn't the script work for instances in headers?
>
Ah, that is one of those Coccinelle details. No idea. I run the script with
make coccicheck COCCI="return-void.cocci" MODE=report M=.
Probably there is a better way to invoke it which does handle include files.
Guenter
^ permalink raw reply [flat|nested] 106+ messages in thread
* [PATCH v5 6/9] mm/mremap: Use range flush that does TLB and page walk cache flush
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
Some architectures do have the concept of page walk cache which need
to be flush when updating higher levels of page tables. A fast mremap
that involves moving page table pages instead of copying pte entries
should flush page walk cache since the old translation cache is no more
valid.
Add new helper flush_pte_tlb_pwc_range() which invalidates both TLB and
page walk cache where TLB entries are mapped with page size PAGE_SIZE.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/include/asm/book3s/64/tlbflush.h | 10 ++++++++++
mm/mremap.c | 14 ++++++++++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
index f9f8a3a264f7..e84fee9db106 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -80,6 +80,16 @@ static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
return flush_hugetlb_tlb_pwc_range(vma, start, end, false);
}
+#define flush_pte_tlb_pwc_range flush_tlb_pwc_range
+static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ if (radix_enabled())
+ return radix__flush_tlb_pwc_range_psize(vma->vm_mm, start,
+ end, mmu_virtual_psize, true);
+ return hash__flush_tlb_range(vma, start, end);
+}
+
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
diff --git a/mm/mremap.c b/mm/mremap.c
index 574287f9bb39..109560977944 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -210,6 +210,16 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
drop_rmap_locks(vma);
}
+#ifndef flush_pte_tlb_pwc_range
+#define flush_pte_tlb_pwc_range flush_pte_tlb_pwc_range
+static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end)
+{
+ return flush_tlb_range(vma, start, end);
+}
+#endif
+
#ifdef CONFIG_HAVE_MOVE_PMD
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
@@ -260,7 +270,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
- flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
@@ -307,7 +317,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pud_none(*new_pud));
pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
- flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* [PATCH v5 6/9] mm/mremap: Use range flush that does TLB and page walk cache flush
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
Some architectures do have the concept of page walk cache which need
to be flush when updating higher levels of page tables. A fast mremap
that involves moving page table pages instead of copying pte entries
should flush page walk cache since the old translation cache is no more
valid.
Add new helper flush_pte_tlb_pwc_range() which invalidates both TLB and
page walk cache where TLB entries are mapped with page size PAGE_SIZE.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/include/asm/book3s/64/tlbflush.h | 10 ++++++++++
mm/mremap.c | 14 ++++++++++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
index f9f8a3a264f7..e84fee9db106 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -80,6 +80,16 @@ static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
return flush_hugetlb_tlb_pwc_range(vma, start, end, false);
}
+#define flush_pte_tlb_pwc_range flush_tlb_pwc_range
+static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ if (radix_enabled())
+ return radix__flush_tlb_pwc_range_psize(vma->vm_mm, start,
+ end, mmu_virtual_psize, true);
+ return hash__flush_tlb_range(vma, start, end);
+}
+
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
diff --git a/mm/mremap.c b/mm/mremap.c
index 574287f9bb39..109560977944 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -210,6 +210,16 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
drop_rmap_locks(vma);
}
+#ifndef flush_pte_tlb_pwc_range
+#define flush_pte_tlb_pwc_range flush_pte_tlb_pwc_range
+static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end)
+{
+ return flush_tlb_range(vma, start, end);
+}
+#endif
+
#ifdef CONFIG_HAVE_MOVE_PMD
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
@@ -260,7 +270,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
- flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
@@ -307,7 +317,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pud_none(*new_pud));
pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
- flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
Move TLB flush outside page table lock so that kernel does
less with page table lock held. Releasing the ptl with old
TLB contents still valid will behave such that such access
happened before the level3 or level2 entry update.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/mremap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/mremap.c b/mm/mremap.c
index 109560977944..9effca76bf17 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -258,7 +258,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
*/
- old_ptl = pmd_lock(vma->vm_mm, old_pmd);
+ old_ptl = pmd_lock(mm, old_pmd);
new_ptl = pmd_lockptr(mm, new_pmd);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
@@ -270,11 +270,11 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
- flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
return true;
}
#else
@@ -305,7 +305,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
*/
- old_ptl = pud_lock(vma->vm_mm, old_pud);
+ old_ptl = pud_lock(mm, old_pud);
new_ptl = pud_lockptr(mm, new_pud);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
@@ -317,11 +317,11 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pud_none(*new_pud));
pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
- flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
return true;
}
#else
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
Move TLB flush outside page table lock so that kernel does
less with page table lock held. Releasing the ptl with old
TLB contents still valid will behave such that such access
happened before the level3 or level2 entry update.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/mremap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/mremap.c b/mm/mremap.c
index 109560977944..9effca76bf17 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -258,7 +258,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
*/
- old_ptl = pmd_lock(vma->vm_mm, old_pmd);
+ old_ptl = pmd_lock(mm, old_pmd);
new_ptl = pmd_lockptr(mm, new_pmd);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
@@ -270,11 +270,11 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
- flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
return true;
}
#else
@@ -305,7 +305,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
*/
- old_ptl = pud_lock(vma->vm_mm, old_pud);
+ old_ptl = pud_lock(mm, old_pud);
new_ptl = pud_lockptr(mm, new_pud);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
@@ -317,11 +317,11 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
VM_BUG_ON(!pud_none(*new_pud));
pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
- flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
return true;
}
#else
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-05-20 15:26 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 15:26 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy
On 4/22/21 11:13 AM, Aneesh Kumar K.V wrote:
> Move TLB flush outside page table lock so that kernel does
> less with page table lock held. Releasing the ptl with old
> TLB contents still valid will behave such that such access
> happened before the level3 or level2 entry update.
>
Ok this break the page lifetime rule
commit: eb66ae030829 ("mremap: properly flush TLB before releasing the
page")
I will respin dropping this change and add a comment around explaining
why we need to do tlb flush before dropping ptl.
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> mm/mremap.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/mm/mremap.c b/mm/mremap.c
> index 109560977944..9effca76bf17 100644
> --- a/mm/mremap.c
> +++ b/mm/mremap.c
> @@ -258,7 +258,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> * We don't have to worry about the ordering of src and dst
> * ptlocks because exclusive mmap_lock prevents deadlock.
> */
> - old_ptl = pmd_lock(vma->vm_mm, old_pmd);
> + old_ptl = pmd_lock(mm, old_pmd);
> new_ptl = pmd_lockptr(mm, new_pmd);
> if (new_ptl != old_ptl)
> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
> @@ -270,11 +270,11 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> VM_BUG_ON(!pmd_none(*new_pmd));
> pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>
> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> spin_unlock(old_ptl);
>
> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
> return true;
> }
> #else
> @@ -305,7 +305,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
> * We don't have to worry about the ordering of src and dst
> * ptlocks because exclusive mmap_lock prevents deadlock.
> */
> - old_ptl = pud_lock(vma->vm_mm, old_pud);
> + old_ptl = pud_lock(mm, old_pud);
> new_ptl = pud_lockptr(mm, new_pud);
> if (new_ptl != old_ptl)
> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
> @@ -317,11 +317,11 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
> VM_BUG_ON(!pud_none(*new_pud));
>
> pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> spin_unlock(old_ptl);
>
> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
> return true;
> }
> #else
>
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-20 15:26 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 15:26 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: npiggin, kaleshsingh, joel, linuxppc-dev
On 4/22/21 11:13 AM, Aneesh Kumar K.V wrote:
> Move TLB flush outside page table lock so that kernel does
> less with page table lock held. Releasing the ptl with old
> TLB contents still valid will behave such that such access
> happened before the level3 or level2 entry update.
>
Ok this break the page lifetime rule
commit: eb66ae030829 ("mremap: properly flush TLB before releasing the
page")
I will respin dropping this change and add a comment around explaining
why we need to do tlb flush before dropping ptl.
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> mm/mremap.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/mm/mremap.c b/mm/mremap.c
> index 109560977944..9effca76bf17 100644
> --- a/mm/mremap.c
> +++ b/mm/mremap.c
> @@ -258,7 +258,7 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> * We don't have to worry about the ordering of src and dst
> * ptlocks because exclusive mmap_lock prevents deadlock.
> */
> - old_ptl = pmd_lock(vma->vm_mm, old_pmd);
> + old_ptl = pmd_lock(mm, old_pmd);
> new_ptl = pmd_lockptr(mm, new_pmd);
> if (new_ptl != old_ptl)
> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
> @@ -270,11 +270,11 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
> VM_BUG_ON(!pmd_none(*new_pmd));
> pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>
> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> spin_unlock(old_ptl);
>
> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
> return true;
> }
> #else
> @@ -305,7 +305,7 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
> * We don't have to worry about the ordering of src and dst
> * ptlocks because exclusive mmap_lock prevents deadlock.
> */
> - old_ptl = pud_lock(vma->vm_mm, old_pud);
> + old_ptl = pud_lock(mm, old_pud);
> new_ptl = pud_lockptr(mm, new_pud);
> if (new_ptl != old_ptl)
> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
> @@ -317,11 +317,11 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
> VM_BUG_ON(!pud_none(*new_pud));
>
> pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
> if (new_ptl != old_ptl)
> spin_unlock(new_ptl);
> spin_unlock(old_ptl);
>
> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
> return true;
> }
> #else
>
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-20 15:26 ` Aneesh Kumar K.V
@ 2021-05-20 16:57 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 16:57 UTC (permalink / raw)
To: linux-mm, akpm, Linus Torvalds
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy
On 5/20/21 8:56 PM, Aneesh Kumar K.V wrote:
> On 4/22/21 11:13 AM, Aneesh Kumar K.V wrote:
>> Move TLB flush outside page table lock so that kernel does
>> less with page table lock held. Releasing the ptl with old
>> TLB contents still valid will behave such that such access
>> happened before the level3 or level2 entry update.
>>
>
>
> Ok this break the page lifetime rule
>
> commit: eb66ae030829 ("mremap: properly flush TLB before releasing the
> page")
>
> I will respin dropping this change and add a comment around explaining
> why we need to do tlb flush before dropping ptl.
Wondering whether this is correct considering we are holding mmap_sem in
write mode in mremap. Can a parallel free/zap happen?
>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>> ---
>> mm/mremap.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/mm/mremap.c b/mm/mremap.c
>> index 109560977944..9effca76bf17 100644
>> --- a/mm/mremap.c
>> +++ b/mm/mremap.c
>> @@ -258,7 +258,7 @@ static bool move_normal_pmd(struct vm_area_struct
>> *vma, unsigned long old_addr,
>> * We don't have to worry about the ordering of src and dst
>> * ptlocks because exclusive mmap_lock prevents deadlock.
>> */
>> - old_ptl = pmd_lock(vma->vm_mm, old_pmd);
>> + old_ptl = pmd_lock(mm, old_pmd);
>> new_ptl = pmd_lockptr(mm, new_pmd);
>> if (new_ptl != old_ptl)
>> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
>> @@ -270,11 +270,11 @@ static bool move_normal_pmd(struct
>> vm_area_struct *vma, unsigned long old_addr,
>> VM_BUG_ON(!pmd_none(*new_pmd));
>> pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> spin_unlock(old_ptl);
>> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
>> return true;
>> }
>> #else
>> @@ -305,7 +305,7 @@ static bool move_normal_pud(struct vm_area_struct
>> *vma, unsigned long old_addr,
>> * We don't have to worry about the ordering of src and dst
>> * ptlocks because exclusive mmap_lock prevents deadlock.
>> */
>> - old_ptl = pud_lock(vma->vm_mm, old_pud);
>> + old_ptl = pud_lock(mm, old_pud);
>> new_ptl = pud_lockptr(mm, new_pud);
>> if (new_ptl != old_ptl)
>> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
>> @@ -317,11 +317,11 @@ static bool move_normal_pud(struct
>> vm_area_struct *vma, unsigned long old_addr,
>> VM_BUG_ON(!pud_none(*new_pud));
>> pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
>> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> spin_unlock(old_ptl);
>> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
>> return true;
>> }
>> #else
>>
>
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-20 16:57 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-20 16:57 UTC (permalink / raw)
To: linux-mm, akpm, Linus Torvalds; +Cc: npiggin, kaleshsingh, joel, linuxppc-dev
On 5/20/21 8:56 PM, Aneesh Kumar K.V wrote:
> On 4/22/21 11:13 AM, Aneesh Kumar K.V wrote:
>> Move TLB flush outside page table lock so that kernel does
>> less with page table lock held. Releasing the ptl with old
>> TLB contents still valid will behave such that such access
>> happened before the level3 or level2 entry update.
>>
>
>
> Ok this break the page lifetime rule
>
> commit: eb66ae030829 ("mremap: properly flush TLB before releasing the
> page")
>
> I will respin dropping this change and add a comment around explaining
> why we need to do tlb flush before dropping ptl.
Wondering whether this is correct considering we are holding mmap_sem in
write mode in mremap. Can a parallel free/zap happen?
>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>> ---
>> mm/mremap.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/mm/mremap.c b/mm/mremap.c
>> index 109560977944..9effca76bf17 100644
>> --- a/mm/mremap.c
>> +++ b/mm/mremap.c
>> @@ -258,7 +258,7 @@ static bool move_normal_pmd(struct vm_area_struct
>> *vma, unsigned long old_addr,
>> * We don't have to worry about the ordering of src and dst
>> * ptlocks because exclusive mmap_lock prevents deadlock.
>> */
>> - old_ptl = pmd_lock(vma->vm_mm, old_pmd);
>> + old_ptl = pmd_lock(mm, old_pmd);
>> new_ptl = pmd_lockptr(mm, new_pmd);
>> if (new_ptl != old_ptl)
>> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
>> @@ -270,11 +270,11 @@ static bool move_normal_pmd(struct
>> vm_area_struct *vma, unsigned long old_addr,
>> VM_BUG_ON(!pmd_none(*new_pmd));
>> pmd_populate(mm, new_pmd, (pgtable_t)pmd_page_vaddr(pmd));
>> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> spin_unlock(old_ptl);
>> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
>> return true;
>> }
>> #else
>> @@ -305,7 +305,7 @@ static bool move_normal_pud(struct vm_area_struct
>> *vma, unsigned long old_addr,
>> * We don't have to worry about the ordering of src and dst
>> * ptlocks because exclusive mmap_lock prevents deadlock.
>> */
>> - old_ptl = pud_lock(vma->vm_mm, old_pud);
>> + old_ptl = pud_lock(mm, old_pud);
>> new_ptl = pud_lockptr(mm, new_pud);
>> if (new_ptl != old_ptl)
>> spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
>> @@ -317,11 +317,11 @@ static bool move_normal_pud(struct
>> vm_area_struct *vma, unsigned long old_addr,
>> VM_BUG_ON(!pud_none(*new_pud));
>> pud_populate(mm, new_pud, (pmd_t *)pud_page_vaddr(pud));
>> - flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
>> if (new_ptl != old_ptl)
>> spin_unlock(new_ptl);
>> spin_unlock(old_ptl);
>> + flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PUD_SIZE);
>> return true;
>> }
>> #else
>>
>
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-20 16:57 ` Aneesh Kumar K.V
@ 2021-05-21 2:40 ` Linus Torvalds
-1 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 2:40 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
On Thu, May 20, 2021 at 6:57 AM Aneesh Kumar K.V
<aneesh.kumar@linux.ibm.com> wrote:
>
> Wondering whether this is correct considering we are holding mmap_sem in
> write mode in mremap.
Right. So *normally* the rule is to EITHER
- hold the mmap_sem for writing
OR
- hold the page table lock
and that the TLB flush needs to happen before you release that lock.
But as that commit message of commit eb66ae030829 ("mremap: properly
flush TLB before releasing the page") says, "mremap()" is a bit
special. It's special because mremap() didn't take ownership of the
page - it only moved it somewhere else. So now the page-out logic -
that relies on the page table lock - can free the page immediately
after we've released the page table lock.
So basically, in order to delay the TLB flush after releasing the page
table lock, it's not really sufficient to _just_ hold the mmap_sem for
writing. You also need to guarantee that the lifetime of the page
itself is held until after the TLB flush.
For normal operations like "munmap()", this happens naturally, because
we remove the page from the page table, and add it to the list of
pages to be freed after the TLB flush.
But mremap never did that "remove the page and add it to a list to be
free'd later". Instead, it just moved the page somewhere else. And
thus there is no guarantee that the page that got moved will continue
to exist until a TLB flush is done.
So mremap does need to flush the TLB before releasing the page table
lock, because that's the lifetime boundary for the page that got
moved.
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 2:40 ` Linus Torvalds
0 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 2:40 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
On Thu, May 20, 2021 at 6:57 AM Aneesh Kumar K.V
<aneesh.kumar@linux.ibm.com> wrote:
>
> Wondering whether this is correct considering we are holding mmap_sem in
> write mode in mremap.
Right. So *normally* the rule is to EITHER
- hold the mmap_sem for writing
OR
- hold the page table lock
and that the TLB flush needs to happen before you release that lock.
But as that commit message of commit eb66ae030829 ("mremap: properly
flush TLB before releasing the page") says, "mremap()" is a bit
special. It's special because mremap() didn't take ownership of the
page - it only moved it somewhere else. So now the page-out logic -
that relies on the page table lock - can free the page immediately
after we've released the page table lock.
So basically, in order to delay the TLB flush after releasing the page
table lock, it's not really sufficient to _just_ hold the mmap_sem for
writing. You also need to guarantee that the lifetime of the page
itself is held until after the TLB flush.
For normal operations like "munmap()", this happens naturally, because
we remove the page from the page table, and add it to the list of
pages to be freed after the TLB flush.
But mremap never did that "remove the page and add it to a list to be
free'd later". Instead, it just moved the page somewhere else. And
thus there is no guarantee that the page that got moved will continue
to exist until a TLB flush is done.
So mremap does need to flush the TLB before releasing the page table
lock, because that's the lifetime boundary for the page that got
moved.
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 2:40 ` Linus Torvalds
@ 2021-05-21 3:03 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 3:03 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
On 5/21/21 8:10 AM, Linus Torvalds wrote:
> On Thu, May 20, 2021 at 6:57 AM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> Wondering whether this is correct considering we are holding mmap_sem in
>> write mode in mremap.
>
> Right. So *normally* the rule is to EITHER
>
> - hold the mmap_sem for writing
>
> OR
>
> - hold the page table lock
>
> and that the TLB flush needs to happen before you release that lock.
>
> But as that commit message of commit eb66ae030829 ("mremap: properly
> flush TLB before releasing the page") says, "mremap()" is a bit
> special. It's special because mremap() didn't take ownership of the
> page - it only moved it somewhere else. So now the page-out logic -
> that relies on the page table lock - can free the page immediately
> after we've released the page table lock.
>
> So basically, in order to delay the TLB flush after releasing the page
> table lock, it's not really sufficient to _just_ hold the mmap_sem for
> writing. You also need to guarantee that the lifetime of the page
> itself is held until after the TLB flush.
>
> For normal operations like "munmap()", this happens naturally, because
> we remove the page from the page table, and add it to the list of
> pages to be freed after the TLB flush.
>
> But mremap never did that "remove the page and add it to a list to be
> free'd later". Instead, it just moved the page somewhere else. And
> thus there is no guarantee that the page that got moved will continue
> to exist until a TLB flush is done.
>
> So mremap does need to flush the TLB before releasing the page table
> lock, because that's the lifetime boundary for the page that got
> moved.
How will we avoid that happening with
c49dd340180260c6239e453263a9a244da9a7c85 /
2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
performance by moving level3/level2 page table entries. When doing so we
are not holding level 4 ptl lock (pte_lock()). But rather we are holding
pmd_lock or pud_lock(). So if we move pages around without holding the
pte lock, won't the above issue happen even if we do a tlb flush with
holding pmd lock/pud lock?
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 3:03 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 3:03 UTC (permalink / raw)
To: Linus Torvalds
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
On 5/21/21 8:10 AM, Linus Torvalds wrote:
> On Thu, May 20, 2021 at 6:57 AM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> Wondering whether this is correct considering we are holding mmap_sem in
>> write mode in mremap.
>
> Right. So *normally* the rule is to EITHER
>
> - hold the mmap_sem for writing
>
> OR
>
> - hold the page table lock
>
> and that the TLB flush needs to happen before you release that lock.
>
> But as that commit message of commit eb66ae030829 ("mremap: properly
> flush TLB before releasing the page") says, "mremap()" is a bit
> special. It's special because mremap() didn't take ownership of the
> page - it only moved it somewhere else. So now the page-out logic -
> that relies on the page table lock - can free the page immediately
> after we've released the page table lock.
>
> So basically, in order to delay the TLB flush after releasing the page
> table lock, it's not really sufficient to _just_ hold the mmap_sem for
> writing. You also need to guarantee that the lifetime of the page
> itself is held until after the TLB flush.
>
> For normal operations like "munmap()", this happens naturally, because
> we remove the page from the page table, and add it to the list of
> pages to be freed after the TLB flush.
>
> But mremap never did that "remove the page and add it to a list to be
> free'd later". Instead, it just moved the page somewhere else. And
> thus there is no guarantee that the page that got moved will continue
> to exist until a TLB flush is done.
>
> So mremap does need to flush the TLB before releasing the page table
> lock, because that's the lifetime boundary for the page that got
> moved.
How will we avoid that happening with
c49dd340180260c6239e453263a9a244da9a7c85 /
2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
performance by moving level3/level2 page table entries. When doing so we
are not holding level 4 ptl lock (pte_lock()). But rather we are holding
pmd_lock or pud_lock(). So if we move pages around without holding the
pte lock, won't the above issue happen even if we do a tlb flush with
holding pmd lock/pud lock?
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 3:03 ` Aneesh Kumar K.V
@ 2021-05-21 3:28 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 3:28 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>> On Thu, May 20, 2021 at 6:57 AM Aneesh Kumar K.V
>> <aneesh.kumar@linux.ibm.com> wrote:
>>>
>>> Wondering whether this is correct considering we are holding mmap_sem in
>>> write mode in mremap.
>>
>> Right. So *normally* the rule is to EITHER
>>
>> - hold the mmap_sem for writing
>>
>> OR
>>
>> - hold the page table lock
>>
>> and that the TLB flush needs to happen before you release that lock.
>>
>> But as that commit message of commit eb66ae030829 ("mremap: properly
>> flush TLB before releasing the page") says, "mremap()" is a bit
>> special. It's special because mremap() didn't take ownership of the
>> page - it only moved it somewhere else. So now the page-out logic -
>> that relies on the page table lock - can free the page immediately
>> after we've released the page table lock.
>>
>> So basically, in order to delay the TLB flush after releasing the page
>> table lock, it's not really sufficient to _just_ hold the mmap_sem for
>> writing. You also need to guarantee that the lifetime of the page
>> itself is held until after the TLB flush.
>>
>> For normal operations like "munmap()", this happens naturally, because
>> we remove the page from the page table, and add it to the list of
>> pages to be freed after the TLB flush.
>>
>> But mremap never did that "remove the page and add it to a list to be
>> free'd later". Instead, it just moved the page somewhere else. And
>> thus there is no guarantee that the page that got moved will continue
>> to exist until a TLB flush is done.
>>
>> So mremap does need to flush the TLB before releasing the page table
>> lock, because that's the lifetime boundary for the page that got
>> moved.
>
> How will we avoid that happening with
> c49dd340180260c6239e453263a9a244da9a7c85 /
> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
> performance by moving level3/level2 page table entries. When doing so we
> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
> pmd_lock or pud_lock(). So if we move pages around without holding the
> pte lock, won't the above issue happen even if we do a tlb flush with
> holding pmd lock/pud lock?
This should help? ie, we flush tlb before we move pagetables to the new
address?
modified mm/mremap.c
@@ -277,11 +277,14 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
/* Clear the pmd */
pmd = *old_pmd;
pmd_clear(old_pmd);
-
+ /*
+ * flush the TLB before we move the page table entries.
+ * TLB flush includes necessary barriers.
+ */
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
- flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 3:28 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 3:28 UTC (permalink / raw)
To: Linus Torvalds
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>> On Thu, May 20, 2021 at 6:57 AM Aneesh Kumar K.V
>> <aneesh.kumar@linux.ibm.com> wrote:
>>>
>>> Wondering whether this is correct considering we are holding mmap_sem in
>>> write mode in mremap.
>>
>> Right. So *normally* the rule is to EITHER
>>
>> - hold the mmap_sem for writing
>>
>> OR
>>
>> - hold the page table lock
>>
>> and that the TLB flush needs to happen before you release that lock.
>>
>> But as that commit message of commit eb66ae030829 ("mremap: properly
>> flush TLB before releasing the page") says, "mremap()" is a bit
>> special. It's special because mremap() didn't take ownership of the
>> page - it only moved it somewhere else. So now the page-out logic -
>> that relies on the page table lock - can free the page immediately
>> after we've released the page table lock.
>>
>> So basically, in order to delay the TLB flush after releasing the page
>> table lock, it's not really sufficient to _just_ hold the mmap_sem for
>> writing. You also need to guarantee that the lifetime of the page
>> itself is held until after the TLB flush.
>>
>> For normal operations like "munmap()", this happens naturally, because
>> we remove the page from the page table, and add it to the list of
>> pages to be freed after the TLB flush.
>>
>> But mremap never did that "remove the page and add it to a list to be
>> free'd later". Instead, it just moved the page somewhere else. And
>> thus there is no guarantee that the page that got moved will continue
>> to exist until a TLB flush is done.
>>
>> So mremap does need to flush the TLB before releasing the page table
>> lock, because that's the lifetime boundary for the page that got
>> moved.
>
> How will we avoid that happening with
> c49dd340180260c6239e453263a9a244da9a7c85 /
> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
> performance by moving level3/level2 page table entries. When doing so we
> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
> pmd_lock or pud_lock(). So if we move pages around without holding the
> pte lock, won't the above issue happen even if we do a tlb flush with
> holding pmd lock/pud lock?
This should help? ie, we flush tlb before we move pagetables to the new
address?
modified mm/mremap.c
@@ -277,11 +277,14 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
/* Clear the pmd */
pmd = *old_pmd;
pmd_clear(old_pmd);
-
+ /*
+ * flush the TLB before we move the page table entries.
+ * TLB flush includes necessary barriers.
+ */
+ flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
- flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 3:03 ` Aneesh Kumar K.V
@ 2021-05-21 6:13 ` Linus Torvalds
-1 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 6:13 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
<aneesh.kumar@linux.ibm.com> wrote:
>
> On 5/21/21 8:10 AM, Linus Torvalds wrote:
> >
> > So mremap does need to flush the TLB before releasing the page table
> > lock, because that's the lifetime boundary for the page that got
> > moved.
>
> How will we avoid that happening with
> c49dd340180260c6239e453263a9a244da9a7c85 /
> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
> performance by moving level3/level2 page table entries. When doing so we
> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
> pmd_lock or pud_lock(). So if we move pages around without holding the
> pte lock, won't the above issue happen even if we do a tlb flush with
> holding pmd lock/pud lock?
Hmm. Interesting.
Your patch (to flush the TLB after clearing the old location, and
before inserting it into the new one) looks like an "obvious" fix.
But I'm putting that "obvious" in quotes, because I'm now wondering if
it actually fixes anything.
Lookie here:
- CPU1 does a mremap of a pmd or pud.
It clears the old pmd/pud, flushes the old TLB range, and then
inserts the pmd/pud at the new location.
- CPU2 does a page shrinker, which calls try_to_unmap, which calls
try_to_unmap_one.
These are entirely asynchronous, because they have no shared lock. The
mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
which does the pte lock.
Now, imagine that the following ordering happens with the two
operations above, and a CPU3 that does accesses:
- CPU2 follows (and sees) the old page tables in the old location and
the took the pte lock
- the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
*and* inserts in the new place.
- a user thread on CPU3 accesses the new location and fills the TLB
of the *new* address
- only now does CPU2 get to the "pte_get_and_clear()" to remove one page
- CPU2 does a TLB flush and frees the page
End result:
- both CPU1 _and_ CPU2 have flushed the TLB.
- but both flushed the *OLD* address
- the page is freed
- CPU3 still has the stale TLB entry pointing to the page that is now
free and might be reused for something else
Am I missing something?
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 6:13 ` Linus Torvalds
0 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 6:13 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
<aneesh.kumar@linux.ibm.com> wrote:
>
> On 5/21/21 8:10 AM, Linus Torvalds wrote:
> >
> > So mremap does need to flush the TLB before releasing the page table
> > lock, because that's the lifetime boundary for the page that got
> > moved.
>
> How will we avoid that happening with
> c49dd340180260c6239e453263a9a244da9a7c85 /
> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
> performance by moving level3/level2 page table entries. When doing so we
> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
> pmd_lock or pud_lock(). So if we move pages around without holding the
> pte lock, won't the above issue happen even if we do a tlb flush with
> holding pmd lock/pud lock?
Hmm. Interesting.
Your patch (to flush the TLB after clearing the old location, and
before inserting it into the new one) looks like an "obvious" fix.
But I'm putting that "obvious" in quotes, because I'm now wondering if
it actually fixes anything.
Lookie here:
- CPU1 does a mremap of a pmd or pud.
It clears the old pmd/pud, flushes the old TLB range, and then
inserts the pmd/pud at the new location.
- CPU2 does a page shrinker, which calls try_to_unmap, which calls
try_to_unmap_one.
These are entirely asynchronous, because they have no shared lock. The
mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
which does the pte lock.
Now, imagine that the following ordering happens with the two
operations above, and a CPU3 that does accesses:
- CPU2 follows (and sees) the old page tables in the old location and
the took the pte lock
- the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
*and* inserts in the new place.
- a user thread on CPU3 accesses the new location and fills the TLB
of the *new* address
- only now does CPU2 get to the "pte_get_and_clear()" to remove one page
- CPU2 does a TLB flush and frees the page
End result:
- both CPU1 _and_ CPU2 have flushed the TLB.
- but both flushed the *OLD* address
- the page is freed
- CPU3 still has the stale TLB entry pointing to the page that is now
free and might be reused for something else
Am I missing something?
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 6:13 ` Linus Torvalds
@ 2021-05-21 12:50 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 12:50 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
On 5/21/21 11:43 AM, Linus Torvalds wrote:
> On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>>>
>>> So mremap does need to flush the TLB before releasing the page table
>>> lock, because that's the lifetime boundary for the page that got
>>> moved.
>>
>> How will we avoid that happening with
>> c49dd340180260c6239e453263a9a244da9a7c85 /
>> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
>> performance by moving level3/level2 page table entries. When doing so we
>> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
>> pmd_lock or pud_lock(). So if we move pages around without holding the
>> pte lock, won't the above issue happen even if we do a tlb flush with
>> holding pmd lock/pud lock?
>
> Hmm. Interesting.
>
> Your patch (to flush the TLB after clearing the old location, and
> before inserting it into the new one) looks like an "obvious" fix.
>
> But I'm putting that "obvious" in quotes, because I'm now wondering if
> it actually fixes anything.
>
> Lookie here:
>
> - CPU1 does a mremap of a pmd or pud.
>
> It clears the old pmd/pud, flushes the old TLB range, and then
> inserts the pmd/pud at the new location.
>
> - CPU2 does a page shrinker, which calls try_to_unmap, which calls
> try_to_unmap_one.
>
> These are entirely asynchronous, because they have no shared lock. The
> mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
> which does the pte lock.
>
> Now, imagine that the following ordering happens with the two
> operations above, and a CPU3 that does accesses:
>
> - CPU2 follows (and sees) the old page tables in the old location and
> the took the pte lock
>
> - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
> *and* inserts in the new place.
>
> - a user thread on CPU3 accesses the new location and fills the TLB
> of the *new* address
>
> - only now does CPU2 get to the "pte_get_and_clear()" to remove one page
>
> - CPU2 does a TLB flush and frees the page
>
> End result:
>
> - both CPU1 _and_ CPU2 have flushed the TLB.
>
> - but both flushed the *OLD* address
>
> - the page is freed
>
> - CPU3 still has the stale TLB entry pointing to the page that is now
> free and might be reused for something else
>
> Am I missing something?
>
That is a problem. With that it looks like CONFIG_HAVE_MOVE_PMD/PUD is
broken? I don't see an easy way to fix this?
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 12:50 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 12:50 UTC (permalink / raw)
To: Linus Torvalds
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
On 5/21/21 11:43 AM, Linus Torvalds wrote:
> On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>>>
>>> So mremap does need to flush the TLB before releasing the page table
>>> lock, because that's the lifetime boundary for the page that got
>>> moved.
>>
>> How will we avoid that happening with
>> c49dd340180260c6239e453263a9a244da9a7c85 /
>> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
>> performance by moving level3/level2 page table entries. When doing so we
>> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
>> pmd_lock or pud_lock(). So if we move pages around without holding the
>> pte lock, won't the above issue happen even if we do a tlb flush with
>> holding pmd lock/pud lock?
>
> Hmm. Interesting.
>
> Your patch (to flush the TLB after clearing the old location, and
> before inserting it into the new one) looks like an "obvious" fix.
>
> But I'm putting that "obvious" in quotes, because I'm now wondering if
> it actually fixes anything.
>
> Lookie here:
>
> - CPU1 does a mremap of a pmd or pud.
>
> It clears the old pmd/pud, flushes the old TLB range, and then
> inserts the pmd/pud at the new location.
>
> - CPU2 does a page shrinker, which calls try_to_unmap, which calls
> try_to_unmap_one.
>
> These are entirely asynchronous, because they have no shared lock. The
> mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
> which does the pte lock.
>
> Now, imagine that the following ordering happens with the two
> operations above, and a CPU3 that does accesses:
>
> - CPU2 follows (and sees) the old page tables in the old location and
> the took the pte lock
>
> - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
> *and* inserts in the new place.
>
> - a user thread on CPU3 accesses the new location and fills the TLB
> of the *new* address
>
> - only now does CPU2 get to the "pte_get_and_clear()" to remove one page
>
> - CPU2 does a TLB flush and frees the page
>
> End result:
>
> - both CPU1 _and_ CPU2 have flushed the TLB.
>
> - but both flushed the *OLD* address
>
> - the page is freed
>
> - CPU3 still has the stale TLB entry pointing to the page that is now
> free and might be reused for something else
>
> Am I missing something?
>
That is a problem. With that it looks like CONFIG_HAVE_MOVE_PMD/PUD is
broken? I don't see an easy way to fix this?
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 12:50 ` Aneesh Kumar K.V
@ 2021-05-21 13:03 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 13:03 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> On 5/21/21 11:43 AM, Linus Torvalds wrote:
>> On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
>> <aneesh.kumar@linux.ibm.com> wrote:
>>>
>>> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>>>>
>>>> So mremap does need to flush the TLB before releasing the page table
>>>> lock, because that's the lifetime boundary for the page that got
>>>> moved.
>>>
>>> How will we avoid that happening with
>>> c49dd340180260c6239e453263a9a244da9a7c85 /
>>> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
>>> performance by moving level3/level2 page table entries. When doing so we
>>> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
>>> pmd_lock or pud_lock(). So if we move pages around without holding the
>>> pte lock, won't the above issue happen even if we do a tlb flush with
>>> holding pmd lock/pud lock?
>>
>> Hmm. Interesting.
>>
>> Your patch (to flush the TLB after clearing the old location, and
>> before inserting it into the new one) looks like an "obvious" fix.
>>
>> But I'm putting that "obvious" in quotes, because I'm now wondering if
>> it actually fixes anything.
>>
>> Lookie here:
>>
>> - CPU1 does a mremap of a pmd or pud.
>>
>> It clears the old pmd/pud, flushes the old TLB range, and then
>> inserts the pmd/pud at the new location.
>>
>> - CPU2 does a page shrinker, which calls try_to_unmap, which calls
>> try_to_unmap_one.
>>
>> These are entirely asynchronous, because they have no shared lock. The
>> mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
>> which does the pte lock.
>>
>> Now, imagine that the following ordering happens with the two
>> operations above, and a CPU3 that does accesses:
>>
>> - CPU2 follows (and sees) the old page tables in the old location and
>> the took the pte lock
>>
>> - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
>> *and* inserts in the new place.
>>
>> - a user thread on CPU3 accesses the new location and fills the TLB
>> of the *new* address
>>
>> - only now does CPU2 get to the "pte_get_and_clear()" to remove one page
>>
>> - CPU2 does a TLB flush and frees the page
>>
>> End result:
>>
>> - both CPU1 _and_ CPU2 have flushed the TLB.
>>
>> - but both flushed the *OLD* address
>>
>> - the page is freed
>>
>> - CPU3 still has the stale TLB entry pointing to the page that is now
>> free and might be reused for something else
>>
>> Am I missing something?
>>
>
> That is a problem. With that it looks like CONFIG_HAVE_MOVE_PMD/PUD is
> broken? I don't see an easy way to fix this?
We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
will be costlier which makes me wonder whether we should even support that?
diff --git a/mm/mremap.c b/mm/mremap.c
index 0270d6fed1dd..9e1e4392a1d9 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -233,7 +233,7 @@ static inline bool arch_supports_page_table_move(void)
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
{
- spinlock_t *old_ptl, *new_ptl;
+ spinlock_t *pte_ptl, *old_ptl, *new_ptl;
struct mm_struct *mm = vma->vm_mm;
pmd_t pmd;
@@ -281,8 +281,17 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
* flush the TLB before we move the page table entries.
*/
flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
+
+ /*
+ * Take the ptl here so that we wait for parallel page table walk
+ * and operations (eg: pageout) using old addr to finish.
+ */
+ pte_ptl = pte_lockptr(mm, old_pmd);
+ spin_lock(pte_ptl);
+
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
+ spin_unlock(pte_ptl);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
^ permalink raw reply related [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 13:03 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 13:03 UTC (permalink / raw)
To: Linus Torvalds
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> On 5/21/21 11:43 AM, Linus Torvalds wrote:
>> On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
>> <aneesh.kumar@linux.ibm.com> wrote:
>>>
>>> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>>>>
>>>> So mremap does need to flush the TLB before releasing the page table
>>>> lock, because that's the lifetime boundary for the page that got
>>>> moved.
>>>
>>> How will we avoid that happening with
>>> c49dd340180260c6239e453263a9a244da9a7c85 /
>>> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
>>> performance by moving level3/level2 page table entries. When doing so we
>>> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
>>> pmd_lock or pud_lock(). So if we move pages around without holding the
>>> pte lock, won't the above issue happen even if we do a tlb flush with
>>> holding pmd lock/pud lock?
>>
>> Hmm. Interesting.
>>
>> Your patch (to flush the TLB after clearing the old location, and
>> before inserting it into the new one) looks like an "obvious" fix.
>>
>> But I'm putting that "obvious" in quotes, because I'm now wondering if
>> it actually fixes anything.
>>
>> Lookie here:
>>
>> - CPU1 does a mremap of a pmd or pud.
>>
>> It clears the old pmd/pud, flushes the old TLB range, and then
>> inserts the pmd/pud at the new location.
>>
>> - CPU2 does a page shrinker, which calls try_to_unmap, which calls
>> try_to_unmap_one.
>>
>> These are entirely asynchronous, because they have no shared lock. The
>> mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
>> which does the pte lock.
>>
>> Now, imagine that the following ordering happens with the two
>> operations above, and a CPU3 that does accesses:
>>
>> - CPU2 follows (and sees) the old page tables in the old location and
>> the took the pte lock
>>
>> - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
>> *and* inserts in the new place.
>>
>> - a user thread on CPU3 accesses the new location and fills the TLB
>> of the *new* address
>>
>> - only now does CPU2 get to the "pte_get_and_clear()" to remove one page
>>
>> - CPU2 does a TLB flush and frees the page
>>
>> End result:
>>
>> - both CPU1 _and_ CPU2 have flushed the TLB.
>>
>> - but both flushed the *OLD* address
>>
>> - the page is freed
>>
>> - CPU3 still has the stale TLB entry pointing to the page that is now
>> free and might be reused for something else
>>
>> Am I missing something?
>>
>
> That is a problem. With that it looks like CONFIG_HAVE_MOVE_PMD/PUD is
> broken? I don't see an easy way to fix this?
We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
will be costlier which makes me wonder whether we should even support that?
diff --git a/mm/mremap.c b/mm/mremap.c
index 0270d6fed1dd..9e1e4392a1d9 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -233,7 +233,7 @@ static inline bool arch_supports_page_table_move(void)
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
{
- spinlock_t *old_ptl, *new_ptl;
+ spinlock_t *pte_ptl, *old_ptl, *new_ptl;
struct mm_struct *mm = vma->vm_mm;
pmd_t pmd;
@@ -281,8 +281,17 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
* flush the TLB before we move the page table entries.
*/
flush_pte_tlb_pwc_range(vma, old_addr, old_addr + PMD_SIZE);
+
+ /*
+ * Take the ptl here so that we wait for parallel page table walk
+ * and operations (eg: pageout) using old addr to finish.
+ */
+ pte_ptl = pte_lockptr(mm, old_pmd);
+ spin_lock(pte_ptl);
+
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
+ spin_unlock(pte_ptl);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
^ permalink raw reply related [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 13:03 ` Aneesh Kumar K.V
@ 2021-05-21 16:03 ` Linus Torvalds
-1 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 16:03 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
On Fri, May 21, 2021 at 3:04 AM Aneesh Kumar K.V
<aneesh.kumar@linux.ibm.com> wrote:
>
> We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
> will be costlier which makes me wonder whether we should even support that?
Well, without USE_SPLIT_PTE_PTLOCKS the pud case would be trivial too.
But everybody uses split pte locks in practice.
I get the feeling that the rmap code might have to use
pud_lock/pmd_lock. I wonder how painful that would be.
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 16:03 ` Linus Torvalds
0 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 16:03 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
On Fri, May 21, 2021 at 3:04 AM Aneesh Kumar K.V
<aneesh.kumar@linux.ibm.com> wrote:
>
> We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
> will be costlier which makes me wonder whether we should even support that?
Well, without USE_SPLIT_PTE_PTLOCKS the pud case would be trivial too.
But everybody uses split pte locks in practice.
I get the feeling that the rmap code might have to use
pud_lock/pmd_lock. I wonder how painful that would be.
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 16:03 ` Linus Torvalds
@ 2021-05-21 16:29 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 16:29 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
On 5/21/21 9:33 PM, Linus Torvalds wrote:
> On Fri, May 21, 2021 at 3:04 AM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
>> will be costlier which makes me wonder whether we should even support that?
>
> Well, without USE_SPLIT_PTE_PTLOCKS the pud case would be trivial too.
> But everybody uses split pte locks in practice.
>
Ok I can get a patch series enabling MOVE_PUD only with
SPLIT_PTE_PTLOCKS disabled.
> I get the feeling that the rmap code might have to use
> pud_lock/pmd_lock. I wonder how painful that would be.
>
and work long term on that? The lock/unlocking can get complicated
because the page_vma_walk now need to return all the held locks.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 16:29 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 16:29 UTC (permalink / raw)
To: Linus Torvalds
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
On 5/21/21 9:33 PM, Linus Torvalds wrote:
> On Fri, May 21, 2021 at 3:04 AM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
>> will be costlier which makes me wonder whether we should even support that?
>
> Well, without USE_SPLIT_PTE_PTLOCKS the pud case would be trivial too.
> But everybody uses split pte locks in practice.
>
Ok I can get a patch series enabling MOVE_PUD only with
SPLIT_PTE_PTLOCKS disabled.
> I get the feeling that the rmap code might have to use
> pud_lock/pmd_lock. I wonder how painful that would be.
>
and work long term on that? The lock/unlocking can get complicated
because the page_vma_walk now need to return all the held locks.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 16:03 ` Linus Torvalds
@ 2021-05-24 14:24 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-24 14:24 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux-MM, Andrew Morton, Michael Ellerman, linuxppc-dev,
Kalesh Singh, Nick Piggin, Joel Fernandes, Christophe Leroy
Linus Torvalds <torvalds@linux-foundation.org> writes:
> On Fri, May 21, 2021 at 3:04 AM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
>> will be costlier which makes me wonder whether we should even support that?
>
> Well, without USE_SPLIT_PTE_PTLOCKS the pud case would be trivial too.
> But everybody uses split pte locks in practice.
>
> I get the feeling that the rmap code might have to use
> pud_lock/pmd_lock. I wonder how painful that would be.
>
Looking at this further, i guess we need to do the above to close the
race window. We do
static bool map_pte(struct page_vma_mapped_walk *pvmw)
{
pvmw->pte = pte_offset_map(pvmw->pmd, pvmw->address);
..
pvmw->ptl = pte_lockptr(pvmw->vma->vm_mm, pvmw->pmd);
spin_lock(pvmw->ptl);
}
That is we walk the table without holding the pte ptl. Hence we still
can race with the optimized PMD move.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-24 14:24 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-24 14:24 UTC (permalink / raw)
To: Linus Torvalds
Cc: Nick Piggin, Linux-MM, Kalesh Singh, Joel Fernandes,
Andrew Morton, linuxppc-dev
Linus Torvalds <torvalds@linux-foundation.org> writes:
> On Fri, May 21, 2021 at 3:04 AM Aneesh Kumar K.V
> <aneesh.kumar@linux.ibm.com> wrote:
>>
>> We could do MOVE_PMD with something like below? A equivalent MOVE_PUD
>> will be costlier which makes me wonder whether we should even support that?
>
> Well, without USE_SPLIT_PTE_PTLOCKS the pud case would be trivial too.
> But everybody uses split pte locks in practice.
>
> I get the feeling that the rmap code might have to use
> pud_lock/pmd_lock. I wonder how painful that would be.
>
Looking at this further, i guess we need to do the above to close the
race window. We do
static bool map_pte(struct page_vma_mapped_walk *pvmw)
{
pvmw->pte = pte_offset_map(pvmw->pmd, pvmw->address);
..
pvmw->ptl = pte_lockptr(pvmw->vma->vm_mm, pvmw->pmd);
spin_lock(pvmw->ptl);
}
That is we walk the table without holding the pte ptl. Hence we still
can race with the optimized PMD move.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 12:50 ` Aneesh Kumar K.V
@ 2021-05-21 15:24 ` Liam Howlett
-1 siblings, 0 replies; 106+ messages in thread
From: Liam Howlett @ 2021-05-21 15:24 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: Linus Torvalds, Linux-MM, Andrew Morton, Michael Ellerman,
linuxppc-dev, Kalesh Singh, Nick Piggin, Joel Fernandes,
Christophe Leroy
* Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [210521 08:51]:
> On 5/21/21 11:43 AM, Linus Torvalds wrote:
> > On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
> > <aneesh.kumar@linux.ibm.com> wrote:
> > >
> > > On 5/21/21 8:10 AM, Linus Torvalds wrote:
> > > >
> > > > So mremap does need to flush the TLB before releasing the page table
> > > > lock, because that's the lifetime boundary for the page that got
> > > > moved.
> > >
> > > How will we avoid that happening with
> > > c49dd340180260c6239e453263a9a244da9a7c85 /
> > > 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
> > > performance by moving level3/level2 page table entries. When doing so we
> > > are not holding level 4 ptl lock (pte_lock()). But rather we are holding
> > > pmd_lock or pud_lock(). So if we move pages around without holding the
> > > pte lock, won't the above issue happen even if we do a tlb flush with
> > > holding pmd lock/pud lock?
> >
> > Hmm. Interesting.
> >
> > Your patch (to flush the TLB after clearing the old location, and
> > before inserting it into the new one) looks like an "obvious" fix.
> >
> > But I'm putting that "obvious" in quotes, because I'm now wondering if
> > it actually fixes anything.
> >
> > Lookie here:
> >
> > - CPU1 does a mremap of a pmd or pud.
> >
> > It clears the old pmd/pud, flushes the old TLB range, and then
> > inserts the pmd/pud at the new location.
> >
> > - CPU2 does a page shrinker, which calls try_to_unmap, which calls
> > try_to_unmap_one.
> >
> > These are entirely asynchronous, because they have no shared lock. The
> > mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
> > which does the pte lock.
> >
> > Now, imagine that the following ordering happens with the two
> > operations above, and a CPU3 that does accesses:
> >
> > - CPU2 follows (and sees) the old page tables in the old location and
> > the took the pte lock
> >
> > - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
> > *and* inserts in the new place.
> >
> > - a user thread on CPU3 accesses the new location and fills the TLB
> > of the *new* address
mremap holds the mmap_sem in write mode as well, doesn't it? How is the user thread
getting the new location?
> >
> > - only now does CPU2 get to the "pte_get_and_clear()" to remove one page
> >
> > - CPU2 does a TLB flush and frees the page
> >
> > End result:
> >
> > - both CPU1 _and_ CPU2 have flushed the TLB.
> >
> > - but both flushed the *OLD* address
> >
> > - the page is freed
> >
> > - CPU3 still has the stale TLB entry pointing to the page that is now
> > free and might be reused for something else
> >
> > Am I missing something?
> >
>
> That is a problem. With that it looks like CONFIG_HAVE_MOVE_PMD/PUD is
> broken? I don't see an easy way to fix this?
>
> -aneesh
>
>
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 15:24 ` Liam Howlett
0 siblings, 0 replies; 106+ messages in thread
From: Liam Howlett @ 2021-05-21 15:24 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linuxppc-dev, Nick Piggin, Linux-MM, Kalesh Singh,
Joel Fernandes, Andrew Morton, Linus Torvalds
* Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [210521 08:51]:
> On 5/21/21 11:43 AM, Linus Torvalds wrote:
> > On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
> > <aneesh.kumar@linux.ibm.com> wrote:
> > >
> > > On 5/21/21 8:10 AM, Linus Torvalds wrote:
> > > >
> > > > So mremap does need to flush the TLB before releasing the page table
> > > > lock, because that's the lifetime boundary for the page that got
> > > > moved.
> > >
> > > How will we avoid that happening with
> > > c49dd340180260c6239e453263a9a244da9a7c85 /
> > > 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
> > > performance by moving level3/level2 page table entries. When doing so we
> > > are not holding level 4 ptl lock (pte_lock()). But rather we are holding
> > > pmd_lock or pud_lock(). So if we move pages around without holding the
> > > pte lock, won't the above issue happen even if we do a tlb flush with
> > > holding pmd lock/pud lock?
> >
> > Hmm. Interesting.
> >
> > Your patch (to flush the TLB after clearing the old location, and
> > before inserting it into the new one) looks like an "obvious" fix.
> >
> > But I'm putting that "obvious" in quotes, because I'm now wondering if
> > it actually fixes anything.
> >
> > Lookie here:
> >
> > - CPU1 does a mremap of a pmd or pud.
> >
> > It clears the old pmd/pud, flushes the old TLB range, and then
> > inserts the pmd/pud at the new location.
> >
> > - CPU2 does a page shrinker, which calls try_to_unmap, which calls
> > try_to_unmap_one.
> >
> > These are entirely asynchronous, because they have no shared lock. The
> > mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
> > which does the pte lock.
> >
> > Now, imagine that the following ordering happens with the two
> > operations above, and a CPU3 that does accesses:
> >
> > - CPU2 follows (and sees) the old page tables in the old location and
> > the took the pte lock
> >
> > - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
> > *and* inserts in the new place.
> >
> > - a user thread on CPU3 accesses the new location and fills the TLB
> > of the *new* address
mremap holds the mmap_sem in write mode as well, doesn't it? How is the user thread
getting the new location?
> >
> > - only now does CPU2 get to the "pte_get_and_clear()" to remove one page
> >
> > - CPU2 does a TLB flush and frees the page
> >
> > End result:
> >
> > - both CPU1 _and_ CPU2 have flushed the TLB.
> >
> > - but both flushed the *OLD* address
> >
> > - the page is freed
> >
> > - CPU3 still has the stale TLB entry pointing to the page that is now
> > free and might be reused for something else
> >
> > Am I missing something?
> >
>
> That is a problem. With that it looks like CONFIG_HAVE_MOVE_PMD/PUD is
> broken? I don't see an easy way to fix this?
>
> -aneesh
>
>
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 15:24 ` Liam Howlett
@ 2021-05-21 16:02 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 16:02 UTC (permalink / raw)
To: Liam Howlett
Cc: Linus Torvalds, Linux-MM, Andrew Morton, Michael Ellerman,
linuxppc-dev, Kalesh Singh, Nick Piggin, Joel Fernandes,
Christophe Leroy
On 5/21/21 8:54 PM, Liam Howlett wrote:
> * Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [210521 08:51]:
>> On 5/21/21 11:43 AM, Linus Torvalds wrote:
>>> On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
>>> <aneesh.kumar@linux.ibm.com> wrote:
>>>>
>>>> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>>>>>
>>>>> So mremap does need to flush the TLB before releasing the page table
>>>>> lock, because that's the lifetime boundary for the page that got
>>>>> moved.
>>>>
>>>> How will we avoid that happening with
>>>> c49dd340180260c6239e453263a9a244da9a7c85 /
>>>> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
>>>> performance by moving level3/level2 page table entries. When doing so we
>>>> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
>>>> pmd_lock or pud_lock(). So if we move pages around without holding the
>>>> pte lock, won't the above issue happen even if we do a tlb flush with
>>>> holding pmd lock/pud lock?
>>>
>>> Hmm. Interesting.
>>>
>>> Your patch (to flush the TLB after clearing the old location, and
>>> before inserting it into the new one) looks like an "obvious" fix.
>>>
>>> But I'm putting that "obvious" in quotes, because I'm now wondering if
>>> it actually fixes anything.
>>>
>>> Lookie here:
>>>
>>> - CPU1 does a mremap of a pmd or pud.
>>>
>>> It clears the old pmd/pud, flushes the old TLB range, and then
>>> inserts the pmd/pud at the new location.
>>>
>>> - CPU2 does a page shrinker, which calls try_to_unmap, which calls
>>> try_to_unmap_one.
>>>
>>> These are entirely asynchronous, because they have no shared lock. The
>>> mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
>>> which does the pte lock.
>>>
>>> Now, imagine that the following ordering happens with the two
>>> operations above, and a CPU3 that does accesses:
>>>
>>> - CPU2 follows (and sees) the old page tables in the old location and
>>> the took the pte lock
>>>
>>> - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
>>> *and* inserts in the new place.
>>>
>>> - a user thread on CPU3 accesses the new location and fills the TLB
>>> of the *new* address
>
> mremap holds the mmap_sem in write mode as well, doesn't it? How is the user thread
> getting the new location?
>
Immediately after CPU1 insert new addr translation as part of mremap,
CPU3 can access that translation by dereferencing the new address.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 16:02 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-05-21 16:02 UTC (permalink / raw)
To: Liam Howlett
Cc: linuxppc-dev, Nick Piggin, Linux-MM, Kalesh Singh,
Joel Fernandes, Andrew Morton, Linus Torvalds
On 5/21/21 8:54 PM, Liam Howlett wrote:
> * Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [210521 08:51]:
>> On 5/21/21 11:43 AM, Linus Torvalds wrote:
>>> On Thu, May 20, 2021 at 5:03 PM Aneesh Kumar K.V
>>> <aneesh.kumar@linux.ibm.com> wrote:
>>>>
>>>> On 5/21/21 8:10 AM, Linus Torvalds wrote:
>>>>>
>>>>> So mremap does need to flush the TLB before releasing the page table
>>>>> lock, because that's the lifetime boundary for the page that got
>>>>> moved.
>>>>
>>>> How will we avoid that happening with
>>>> c49dd340180260c6239e453263a9a244da9a7c85 /
>>>> 2c91bd4a4e2e530582d6fd643ea7b86b27907151 . The commit improves mremap
>>>> performance by moving level3/level2 page table entries. When doing so we
>>>> are not holding level 4 ptl lock (pte_lock()). But rather we are holding
>>>> pmd_lock or pud_lock(). So if we move pages around without holding the
>>>> pte lock, won't the above issue happen even if we do a tlb flush with
>>>> holding pmd lock/pud lock?
>>>
>>> Hmm. Interesting.
>>>
>>> Your patch (to flush the TLB after clearing the old location, and
>>> before inserting it into the new one) looks like an "obvious" fix.
>>>
>>> But I'm putting that "obvious" in quotes, because I'm now wondering if
>>> it actually fixes anything.
>>>
>>> Lookie here:
>>>
>>> - CPU1 does a mremap of a pmd or pud.
>>>
>>> It clears the old pmd/pud, flushes the old TLB range, and then
>>> inserts the pmd/pud at the new location.
>>>
>>> - CPU2 does a page shrinker, which calls try_to_unmap, which calls
>>> try_to_unmap_one.
>>>
>>> These are entirely asynchronous, because they have no shared lock. The
>>> mremap uses the pmd lock, the try_to_unmap_one() does the rmap walk,
>>> which does the pte lock.
>>>
>>> Now, imagine that the following ordering happens with the two
>>> operations above, and a CPU3 that does accesses:
>>>
>>> - CPU2 follows (and sees) the old page tables in the old location and
>>> the took the pte lock
>>>
>>> - the mremap on CPU1 starts - cleared the old pmd, flushed the tlb,
>>> *and* inserts in the new place.
>>>
>>> - a user thread on CPU3 accesses the new location and fills the TLB
>>> of the *new* address
>
> mremap holds the mmap_sem in write mode as well, doesn't it? How is the user thread
> getting the new location?
>
Immediately after CPU1 insert new addr translation as part of mremap,
CPU3 can access that translation by dereferencing the new address.
-aneesh
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
2021-05-21 15:24 ` Liam Howlett
@ 2021-05-21 16:05 ` Linus Torvalds
-1 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 16:05 UTC (permalink / raw)
To: Liam Howlett
Cc: Aneesh Kumar K.V, Linux-MM, Andrew Morton, Michael Ellerman,
linuxppc-dev, Kalesh Singh, Nick Piggin, Joel Fernandes,
Christophe Leroy
On Fri, May 21, 2021 at 5:25 AM Liam Howlett <liam.howlett@oracle.com> wrote:
>
> mremap holds the mmap_sem in write mode as well, doesn't it? How is the user thread
> getting the new location?
No amount of locking protects against the HW page table walker (or,
indeed, software ones, but they are irrelevant).
And an attacker _knows_ the new address, because that's who would be
doing the mremap() in the first place - to trigger this bug.
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread* Re: [PATCH v5 7/9] mm/mremap: Move TLB flush outside page table lock
@ 2021-05-21 16:05 ` Linus Torvalds
0 siblings, 0 replies; 106+ messages in thread
From: Linus Torvalds @ 2021-05-21 16:05 UTC (permalink / raw)
To: Liam Howlett
Cc: Aneesh Kumar K.V, Nick Piggin, Linux-MM, Kalesh Singh,
Joel Fernandes, Andrew Morton, linuxppc-dev
On Fri, May 21, 2021 at 5:25 AM Liam Howlett <liam.howlett@oracle.com> wrote:
>
> mremap holds the mmap_sem in write mode as well, doesn't it? How is the user thread
> getting the new location?
No amount of locking protects against the HW page table walker (or,
indeed, software ones, but they are irrelevant).
And an attacker _knows_ the new address, because that's who would be
doing the mremap() in the first place - to trigger this bug.
Linus
^ permalink raw reply [flat|nested] 106+ messages in thread
* [PATCH v5 8/9] mm/mremap: Allow arch runtime override
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
Architectures like ppc64 support faster mremap only with radix
translation. Hence allow a runtime check w.r.t support for fast mremap.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/include/asm/tlb.h | 6 ++++++
mm/mremap.c | 15 ++++++++++++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index 160422a439aa..09a9ae5f3656 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -83,5 +83,11 @@ static inline int mm_is_thread_local(struct mm_struct *mm)
}
#endif
+#define arch_supports_page_table_move arch_supports_page_table_move
+static inline bool arch_supports_page_table_move(void)
+{
+ return radix_enabled();
+}
+
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_TLB_H */
diff --git a/mm/mremap.c b/mm/mremap.c
index 9effca76bf17..27306168440f 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -25,7 +25,7 @@
#include <linux/userfaultfd_k.h>
#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
+#include <asm/tlb.h>
#include <asm/pgalloc.h>
#include "internal.h"
@@ -220,6 +220,15 @@ static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
}
#endif
+#ifndef arch_supports_page_table_move
+#define arch_supports_page_table_move arch_supports_page_table_move
+static inline bool arch_supports_page_table_move(void)
+{
+ return IS_ENABLED(CONFIG_HAVE_MOVE_PMD) ||
+ IS_ENABLED(CONFIG_HAVE_MOVE_PUD);
+}
+#endif
+
#ifdef CONFIG_HAVE_MOVE_PMD
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
@@ -228,6 +237,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
struct mm_struct *mm = vma->vm_mm;
pmd_t pmd;
+ if (!arch_supports_page_table_move())
+ return false;
/*
* The destination pmd shouldn't be established, free_pgtables()
* should have released it.
@@ -294,6 +305,8 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
struct mm_struct *mm = vma->vm_mm;
pud_t pud;
+ if (!arch_supports_page_table_move())
+ return false;
/*
* The destination pud shouldn't be established, free_pgtables()
* should have released it.
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread* [PATCH v5 8/9] mm/mremap: Allow arch runtime override
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
Architectures like ppc64 support faster mremap only with radix
translation. Hence allow a runtime check w.r.t support for fast mremap.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/include/asm/tlb.h | 6 ++++++
mm/mremap.c | 15 ++++++++++++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index 160422a439aa..09a9ae5f3656 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -83,5 +83,11 @@ static inline int mm_is_thread_local(struct mm_struct *mm)
}
#endif
+#define arch_supports_page_table_move arch_supports_page_table_move
+static inline bool arch_supports_page_table_move(void)
+{
+ return radix_enabled();
+}
+
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_TLB_H */
diff --git a/mm/mremap.c b/mm/mremap.c
index 9effca76bf17..27306168440f 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -25,7 +25,7 @@
#include <linux/userfaultfd_k.h>
#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
+#include <asm/tlb.h>
#include <asm/pgalloc.h>
#include "internal.h"
@@ -220,6 +220,15 @@ static inline void flush_pte_tlb_pwc_range(struct vm_area_struct *vma,
}
#endif
+#ifndef arch_supports_page_table_move
+#define arch_supports_page_table_move arch_supports_page_table_move
+static inline bool arch_supports_page_table_move(void)
+{
+ return IS_ENABLED(CONFIG_HAVE_MOVE_PMD) ||
+ IS_ENABLED(CONFIG_HAVE_MOVE_PUD);
+}
+#endif
+
#ifdef CONFIG_HAVE_MOVE_PMD
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
@@ -228,6 +237,8 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
struct mm_struct *mm = vma->vm_mm;
pmd_t pmd;
+ if (!arch_supports_page_table_move())
+ return false;
/*
* The destination pmd shouldn't be established, free_pgtables()
* should have released it.
@@ -294,6 +305,8 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
struct mm_struct *mm = vma->vm_mm;
pud_t pud;
+ if (!arch_supports_page_table_move())
+ return false;
/*
* The destination pud shouldn't be established, free_pgtables()
* should have released it.
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 9/9] powerpc/mm: Enable move pmd/pud
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
-1 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm
Cc: mpe, linuxppc-dev, kaleshsingh, npiggin, joel, Christophe Leroy,
Aneesh Kumar K.V
mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:
1GB mremap - Source PTE-aligned, Destination PTE-aligned
mremap time: 1127034ns
1GB mremap - Source PMD-aligned, Destination PMD-aligned
mremap time: 508817ns
1GB mremap - Source PUD-aligned, Destination PUD-aligned
mremap time: 23046ns
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/platforms/Kconfig.cputype | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 3ce907523b1e..2e666e569fdf 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -97,6 +97,8 @@ config PPC_BOOK3S_64
select PPC_HAVE_PMU_SUPPORT
select SYS_SUPPORTS_HUGETLBFS
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ select HAVE_MOVE_PMD
+ select HAVE_MOVE_PUD
select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
select ARCH_SUPPORTS_NUMA_BALANCING
select IRQ_WORK
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* [PATCH v5 9/9] powerpc/mm: Enable move pmd/pud
@ 2021-04-22 5:43 ` Aneesh Kumar K.V
0 siblings, 0 replies; 106+ messages in thread
From: Aneesh Kumar K.V @ 2021-04-22 5:43 UTC (permalink / raw)
To: linux-mm, akpm; +Cc: Aneesh Kumar K.V, npiggin, kaleshsingh, joel, linuxppc-dev
mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:
1GB mremap - Source PTE-aligned, Destination PTE-aligned
mremap time: 1127034ns
1GB mremap - Source PMD-aligned, Destination PMD-aligned
mremap time: 508817ns
1GB mremap - Source PUD-aligned, Destination PUD-aligned
mremap time: 23046ns
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/platforms/Kconfig.cputype | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 3ce907523b1e..2e666e569fdf 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -97,6 +97,8 @@ config PPC_BOOK3S_64
select PPC_HAVE_PMU_SUPPORT
select SYS_SUPPORTS_HUGETLBFS
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ select HAVE_MOVE_PMD
+ select HAVE_MOVE_PUD
select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
select ARCH_SUPPORTS_NUMA_BALANCING
select IRQ_WORK
--
2.30.2
^ permalink raw reply related [flat|nested] 106+ messages in thread
* Re: [PATCH v5 9/9] powerpc/mm: Enable move pmd/pud
2021-04-22 5:43 ` Aneesh Kumar K.V
@ 2021-05-11 22:19 ` Andrew Morton
-1 siblings, 0 replies; 106+ messages in thread
From: Andrew Morton @ 2021-05-11 22:19 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, mpe, linuxppc-dev, kaleshsingh, npiggin, joel,
Christophe Leroy
On Thu, 22 Apr 2021 11:13:23 +0530 "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> wrote:
> mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:
> 1GB mremap - Source PTE-aligned, Destination PTE-aligned
> mremap time: 1127034ns
> 1GB mremap - Source PMD-aligned, Destination PMD-aligned
> mremap time: 508817ns
> 1GB mremap - Source PUD-aligned, Destination PUD-aligned
> mremap time: 23046ns
Well that's nice.
How significant is this in practice? How common is it for applications
to successfully align the region? Do real-world applications actually
benefit from this?
Are there userspace libraries (malloc() etc) which should be reworked
to fully exploit this?
^ permalink raw reply [flat|nested] 106+ messages in thread
* Re: [PATCH v5 9/9] powerpc/mm: Enable move pmd/pud
@ 2021-05-11 22:19 ` Andrew Morton
0 siblings, 0 replies; 106+ messages in thread
From: Andrew Morton @ 2021-05-11 22:19 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: npiggin, linux-mm, kaleshsingh, joel, linuxppc-dev
On Thu, 22 Apr 2021 11:13:23 +0530 "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> wrote:
> mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:
> 1GB mremap - Source PTE-aligned, Destination PTE-aligned
> mremap time: 1127034ns
> 1GB mremap - Source PMD-aligned, Destination PMD-aligned
> mremap time: 508817ns
> 1GB mremap - Source PUD-aligned, Destination PUD-aligned
> mremap time: 23046ns
Well that's nice.
How significant is this in practice? How common is it for applications
to successfully align the region? Do real-world applications actually
benefit from this?
Are there userspace libraries (malloc() etc) which should be reworked
to fully exploit this?
^ permalink raw reply [flat|nested] 106+ messages in thread