From: Andreas Rehn <rehn.andreas86@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 0/6] arm: sunxi: v3s: add ethernet support
Date: Wed, 19 May 2021 21:42:02 +0200 [thread overview]
Message-ID: <20210519194208.515548-1-rehn.andreas86@gmail.com> (raw)
This patchset enables ethernet on Allwinner V3/Sochip S3 SoCs.
It is tested with an LicheePi Zero Dock board in combination
with different switches and one direct link.
Test scenario: Download mainline kernel and device-tree
over tftp and start kernel with nfs rootfs.
Without [PATCH 6/6], i wasn't able to get a stable connection
on 100 Mb full duplex switches with autonegation enabled.
Maybe the internal phy has a different behavior on softreset
then others which results in a delayed established link.
Andreas Rehn (6):
dts: sunxi: add licheepi-zero-dock
clk: sunxi: v3s: Implement EMAC clocks/resets
clk: sunxi: v3s: fix tabs / spaces
net: sun8i-emac: add v3s pinmux setting
dts: sunxi: v3s: enable emac support
net: sun8i-emac: v3s: fix soft reset timeout
arch/arm/dts/Makefile | 3 ++-
arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts | 11 +++++++++++
arch/arm/dts/sun8i-v3s.dtsi | 10 +++++++++-
board/sunxi/MAINTAINERS | 5 +++++
configs/LicheePi_Zero_dock_defconfig | 7 +++++++
drivers/clk/sunxi/clk_v3s.c | 10 ++++++++--
drivers/net/sun8i_emac.c | 5 ++++-
7 files changed, 46 insertions(+), 5 deletions(-)
create mode 100644 configs/LicheePi_Zero_dock_defconfig
--
2.25.1
next reply other threads:[~2021-05-19 19:42 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 19:42 Andreas Rehn [this message]
2021-05-19 19:42 ` [PATCH 1/6] dts: sunxi: add licheepi-zero-dock Andreas Rehn
2021-05-19 21:42 ` Andre Przywara
2021-05-19 21:55 ` Andreas Rehn
2021-05-19 19:42 ` [PATCH 2/6] clk: sunxi: v3s: Implement EMAC clocks/resets Andreas Rehn
2021-05-19 21:43 ` Andre Przywara
2021-05-19 19:42 ` [PATCH 3/6] clk: sunxi: v3s: fix tabs / spaces Andreas Rehn
2021-05-19 21:43 ` Andre Przywara
2021-05-19 21:59 ` Andreas Rehn
2021-05-22 23:17 ` [PATCH v2 " Andreas Rehn
2021-05-26 23:16 ` Andre Przywara
2022-01-15 17:36 ` Sean Anderson
2021-05-19 19:42 ` [PATCH 4/6] net: sun8i-emac: add v3s pinmux setting Andreas Rehn
2021-05-19 21:44 ` Andre Przywara
2021-05-22 23:22 ` [PATCH v2 4/6] net: sun8i-emac: add v3s variant Andreas Rehn
2021-05-25 6:53 ` Ramon Fried
2021-05-26 23:24 ` Andre Przywara
2021-12-07 6:13 ` Jagan Teki
2021-05-19 19:42 ` [PATCH 5/6] dts: sunxi: v3s: enable emac support Andreas Rehn
2021-05-19 21:44 ` Andre Przywara
2021-05-19 19:42 ` [PATCH 6/6] net: sun8i-emac: v3s: fix soft reset timeout Andreas Rehn
2021-05-19 21:44 ` Andre Przywara
2021-05-19 22:10 ` Andreas Rehn
2021-05-19 22:46 ` Andre Przywara
2021-05-20 0:18 ` Andre Przywara
2021-05-21 20:14 ` Andreas Rehn
2021-06-03 13:56 ` Andre Przywara
2021-06-03 14:43 ` Heinrich Schuchardt
2021-06-03 15:29 ` Andreas Rehn
2021-05-22 23:23 ` [PATCH v2 " Andreas Rehn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519194208.515548-1-rehn.andreas86@gmail.com \
--to=rehn.andreas86@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.