From: Peter Seiderer <ps.report@gmx.net>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH/next v1 6/6] board/raspberrypi: add Compute Module 4/IO Board support (64 Bit)
Date: Wed, 19 May 2021 23:51:15 +0200 [thread overview]
Message-ID: <20210519215115.21684-6-ps.report@gmx.net> (raw)
In-Reply-To: <20210519215115.21684-1-ps.report@gmx.net>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
---
.../genimage-raspberrypicm4io-64.cfg | 30 ++++++++++++++
board/raspberrypi/readme.txt | 4 ++
board/raspberrypicm4io-64 | 1 +
configs/raspberrypicm4io_64_defconfig | 41 +++++++++++++++++++
4 files changed, 76 insertions(+)
create mode 100644 board/raspberrypi/genimage-raspberrypicm4io-64.cfg
create mode 120000 board/raspberrypicm4io-64
create mode 100644 configs/raspberrypicm4io_64_defconfig
diff --git a/board/raspberrypi/genimage-raspberrypicm4io-64.cfg b/board/raspberrypi/genimage-raspberrypicm4io-64.cfg
new file mode 100644
index 0000000000..32a7ca897d
--- /dev/null
+++ b/board/raspberrypi/genimage-raspberrypicm4io-64.cfg
@@ -0,0 +1,30 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "bcm2711-rpi-cm4.dtb",
+ "rpi-firmware/cmdline.txt",
+ "rpi-firmware/config.txt",
+ "rpi-firmware/fixup.dat",
+ "rpi-firmware/start.elf",
+ "rpi-firmware/overlays",
+ "Image"
+ }
+ }
+ size = 32M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index 2032bf80ed..62cb248633 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -52,6 +52,10 @@ For model CM4 (on IO Board):
$ make raspberrypicm4io_defconfig
+or for CM4 (on IO Board - 64 bit):
+
+ $ make raspberrypicm4io_64_defconfig
+
Build the rootfs
----------------
diff --git a/board/raspberrypicm4io-64 b/board/raspberrypicm4io-64
new file mode 120000
index 0000000000..fcdafc81ed
--- /dev/null
+++ b/board/raspberrypicm4io-64
@@ -0,0 +1 @@
+raspberrypi
\ No newline at end of file
diff --git a/configs/raspberrypicm4io_64_defconfig b/configs/raspberrypicm4io_64_defconfig
new file mode 100644
index 0000000000..66a9332fe5
--- /dev/null
+++ b/configs/raspberrypicm4io_64_defconfig
@@ -0,0 +1,41 @@
+BR2_aarch64=y
+BR2_cortex_a72=y
+BR2_ARM_FPU_VFPV4=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_SYSTEM_DHCP="eth0"
+
+# Linux headers same as kernel, a 5.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,b657cd2f27d9171b75c846f21e7b4bb581b3ed29)/linux-b657cd2f27d9171b75c846f21e7b4bb581b3ed29.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
+
+# Build the DTB from the kernel sources
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-cm4"
+
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+
+# Required tools to create the SD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Required tool to flash CM4 eMMC memory
+BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --aarch64"
--
2.31.1
next prev parent reply other threads:[~2021-05-19 21:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 21:51 [Buildroot] [PATCH/next v1 1/6] package/raspberrypi-usbboot: bump version to 9324fd7 Peter Seiderer
2021-05-19 21:51 ` [Buildroot] [PATCH/next v1 2/6] package/raspberrypi-usbboot: enable for BR2_aarch64 Peter Seiderer
2021-05-19 21:51 ` [Buildroot] [PATCH/next v1 3/6] board/raspberrypi: add rpi3 64 bit hint Peter Seiderer
2021-05-19 21:51 ` [Buildroot] [PATCH/next v1 4/6] board/raspberrypi: add rpi4 " Peter Seiderer
2021-05-19 21:51 ` [Buildroot] [PATCH/next v1 5/6] board/raspberrypi: add Compute Module 4/IO Board support Peter Seiderer
2021-05-19 21:51 ` Peter Seiderer [this message]
2021-05-20 8:00 ` [Buildroot] [PATCH/next v1 1/6] package/raspberrypi-usbboot: bump version to 9324fd7 Yann E. MORIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519215115.21684-6-ps.report@gmx.net \
--to=ps.report@gmx.net \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.