From mboxrd@z Thu Jan 1 00:00:00 1970 From: Giulio Benetti Date: Thu, 20 May 2021 16:10:18 +0200 Subject: [PATCH 6/6] configs: imxrt1050-evk: enable host usb support and its command In-Reply-To: <20210520141018.2972320-1-giulio.benetti@benettiengineering.com> References: <20210520141018.2972320-1-giulio.benetti@benettiengineering.com> Message-ID: <20210520141018.2972320-7-giulio.benetti@benettiengineering.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Now that usb host is supported let's enable it on this board. Signed-off-by: Giulio Benetti --- configs/imxrt1050-evk_defconfig | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index 9c8bdb07dc..9f509f3b9f 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -32,8 +32,9 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set +CONFIG_CMD_USB=y # CONFIG_CMD_MII is not set -# CONFIG_DOS_PARTITION is not set +# CONFIG_SPL_DOS_PARTITION is not set # CONFIG_ISO_PARTITION is not set # CONFIG_EFI_PARTITION is not set CONFIG_OF_CONTROL=y @@ -65,6 +66,10 @@ CONFIG_FSL_LPUART=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_IMX_GPT_TIMER=y +CONFIG_USB=y +CONFIG_DM_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_USB_EHCI_HCD=y CONFIG_DM_VIDEO=y CONFIG_BACKLIGHT_GPIO=y CONFIG_SYS_WHITE_ON_BLACK=y -- 2.25.1