All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keguang Zhang <keguang.zhang@gmail.com>
To: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Kelvin Cheung <keguang.zhang@gmail.com>
Subject: [PATCH 3/3] MIPS: Loongson1B: Add Loongson1 NAND device
Date: Fri, 21 May 2021 08:04:05 +0800	[thread overview]
Message-ID: <20210521000405.4387-4-keguang.zhang@gmail.com> (raw)
In-Reply-To: <20210521000405.4387-1-keguang.zhang@gmail.com>

From: Kelvin Cheung <keguang.zhang@gmail.com>

This patch adds NAND device and its platform data for Loongson1B.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
---
 .../include/asm/mach-loongson32/platform.h    |  2 ++
 arch/mips/loongson32/common/platform.c        | 27 +++++++++++++++++++
 arch/mips/loongson32/ls1b/board.c             | 22 +++++++++++++++
 3 files changed, 51 insertions(+)

diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
index d4d2a9baacdb..daf02b5c83a7 100644
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ b/arch/mips/include/asm/mach-loongson32/platform.h
@@ -19,11 +19,13 @@ extern struct platform_device ls1x_eth1_pdev;
 extern struct platform_device ls1x_ehci_pdev;
 extern struct platform_device ls1x_gpio0_pdev;
 extern struct platform_device ls1x_gpio1_pdev;
+extern struct platform_device ls1x_nand_pdev;
 extern struct platform_device ls1x_rtc_pdev;
 extern struct platform_device ls1x_wdt_pdev;
 
 void __init ls1x_clk_init(void);
 void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata);
+void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata);
 void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
 void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
 
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 2092a7ff32e0..d47a84ecf193 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -287,6 +287,33 @@ struct platform_device ls1x_gpio1_pdev = {
 	.resource	= ls1x_gpio1_resources,
 };
 
+/* NAND Flash */
+static struct resource ls1x_nand_resources[] = {
+	[0] = {
+		.start	= LS1X_NAND_BASE,
+		.end	= LS1X_NAND_BASE + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "dmachan0",
+		.start	= LS1X_DMA_CHANNEL0,
+		.end	= LS1X_DMA_CHANNEL0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device ls1x_nand_pdev = {
+	.name		= "ls1x-nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ls1x_nand_resources),
+	.resource	= ls1x_nand_resources,
+};
+
+void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata)
+{
+	ls1x_nand_pdev.dev.platform_data = pdata;
+}
+
 /* USB EHCI */
 static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
 
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
index 2be4d8544444..dd5a0ce9e4fb 100644
--- a/arch/mips/loongson32/ls1b/board.c
+++ b/arch/mips/loongson32/ls1b/board.c
@@ -23,6 +23,26 @@ struct plat_ls1x_dma ls1x_dma_pdata = {
 	.slavecnt = ARRAY_SIZE(ls1x_dma_slave_map),
 };
 
+static struct mtd_partition ls1x_nand_parts[] = {
+	{
+		.name        = "kernel",
+		.offset      = 0,
+		.size        = SZ_16M,
+	},
+	{
+		.name        = "rootfs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+struct plat_ls1x_nand ls1x_nand_pdata = {
+	.parts		= ls1x_nand_parts,
+	.nr_parts	= ARRAY_SIZE(ls1x_nand_parts),
+	.hold_cycle	= 0x2,
+	.wait_cycle	= 0xc,
+};
+
 static const struct gpio_led ls1x_gpio_leds[] __initconst = {
 	{
 		.name			= "LED9",
@@ -53,6 +73,7 @@ static struct platform_device *ls1b_platform_devices[] __initdata = {
 	&ls1x_ehci_pdev,
 	&ls1x_gpio0_pdev,
 	&ls1x_gpio1_pdev,
+	&ls1x_nand_pdev,
 	&ls1x_rtc_pdev,
 	&ls1x_wdt_pdev,
 };
@@ -61,6 +82,7 @@ static int __init ls1b_platform_init(void)
 {
 	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
 	ls1x_dma_set_platdata(&ls1x_dma_pdata);
+	ls1x_nand_set_platdata(&ls1x_nand_pdata);
 
 	gpio_led_register_device(-1, &ls1x_led_pdata);
 
-- 
2.30.2


  parent reply	other threads:[~2021-05-21  0:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21  0:04 [PATCH 0/3] MIPS: Loongson1B: Add dmaengine and NAND device Keguang Zhang
2021-05-21  0:04 ` [PATCH 1/3] MIPS: Loongson1B: Add dma_slave_map to DMA platform data Keguang Zhang
2021-05-21  0:04 ` [PATCH 2/3] MIPS: Loongson1B: Add Loongson1 dmaengine device Keguang Zhang
2021-05-21  0:04 ` Keguang Zhang [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-05-20 13:48 [PATCH 0/3] MIPS: Loongson1B: Add dmaengine and NAND device Keguang Zhang
2021-05-20 13:48 ` [PATCH 3/3] MIPS: Loongson1B: Add Loongson1 " Keguang Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521000405.4387-4-keguang.zhang@gmail.com \
    --to=keguang.zhang@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.