All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	Jonathan Marek <jonathan@marek.ca>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [RFC PATCH 03/13] drm/msm/dsi: add support for dsc data
Date: Fri, 21 May 2021 18:19:33 +0530	[thread overview]
Message-ID: <20210521124946.3617862-5-vkoul@kernel.org> (raw)
In-Reply-To: <20210521124946.3617862-1-vkoul@kernel.org>

DSC needs some configuration from device tree, add support to read and
store these params and add DSC structures in msm_drv

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 170 +++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/msm_drv.h      |  32 ++++++
 2 files changed, 202 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 8a10e4343281..864d3c655e73 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -156,6 +156,7 @@ struct msm_dsi_host {
 	struct regmap *sfpb;
 
 	struct drm_display_mode *mode;
+	struct msm_display_dsc_config *dsc;
 
 	/* connected device info */
 	struct device_node *device_node;
@@ -1744,6 +1745,168 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
 	return -EINVAL;
 }
 
+static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
+	0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62,
+	0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
+};
+
+/* only 8bpc, 8bpp added */
+static char min_qp[DSC_NUM_BUF_RANGES] = {
+	0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13
+};
+
+static char max_qp[DSC_NUM_BUF_RANGES] = {
+	4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15
+};
+
+static char bpg_offset[DSC_NUM_BUF_RANGES] = {
+	2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
+};
+
+static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc)
+{
+	int i;
+
+	dsc->drm.rc_model_size = 8192;
+	dsc->drm.first_line_bpg_offset = 15;
+	dsc->drm.rc_edge_factor = 6;
+	dsc->drm.rc_tgt_offset_high = 3;
+	dsc->drm.rc_tgt_offset_low = 3;
+	dsc->drm.simple_422 = 0;
+	dsc->drm.convert_rgb = 1;
+	dsc->drm.vbr_enable = 0;
+
+	/* handle only bpp = bpc = 8 */
+	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++)
+		dsc->drm.rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i];
+
+	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+		dsc->drm.rc_range_params[i].range_min_qp = min_qp[i];
+		dsc->drm.rc_range_params[i].range_max_qp = max_qp[i];
+		dsc->drm.rc_range_params[i].range_bpg_offset = bpg_offset[i];
+	}
+
+	dsc->drm.initial_offset = 6144;
+	dsc->drm.initial_xmit_delay = 512;
+	dsc->drm.initial_scale_value = 32;
+	dsc->drm.first_line_bpg_offset = 12;
+	dsc->drm.line_buf_depth = dsc->drm.bits_per_component + 1;
+
+	/* bpc 8 */
+	dsc->drm.flatness_min_qp = 3;
+	dsc->drm.flatness_max_qp = 12;
+	dsc->det_thresh_flatness = 7;
+	dsc->drm.rc_quant_incr_limit0 = 11;
+	dsc->drm.rc_quant_incr_limit1 = 11;
+	dsc->drm.mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
+
+	/* FIXME: need to call drm_dsc_compute_rc_parameters() so that rest of
+	 * params are calculated
+	 */
+
+	i = dsc->drm.slice_width % 3;
+	switch (i) {
+	case 0:
+		dsc->slice_last_group_size = 2;
+		break;
+
+	case 1:
+		dsc->slice_last_group_size = 0;
+		break;
+
+	case 2:
+		dsc->slice_last_group_size = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int dsi_host_parse_dsc(struct msm_dsi_host *msm_host,
+			      struct device_node *np)
+{
+	struct device *dev = &msm_host->pdev->dev;
+	struct msm_display_dsc_config *dsc;
+	bool is_dsc_enabled;
+	u32 data;
+	int ret;
+
+	is_dsc_enabled = of_property_read_bool(np, "qcom,mdss-dsc-enabled");
+
+	if (!is_dsc_enabled)
+		return 0;
+
+	dsc = kzalloc(sizeof(*dsc), GFP_KERNEL);
+	if (!dsc)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(np, "qcom,mdss-dsc-version", &data);
+	if (ret) {
+		dsc->drm.dsc_version_major = 0x1;
+		dsc->drm.dsc_version_minor = 0x1;
+	} else {
+		dsc->drm.dsc_version_major = (data >> 4) & 0xf;
+		dsc->drm.dsc_version_minor = data & 0xf;
+	}
+
+	ret = of_property_read_u32(np, "qcom,mdss-scr-version", &data);
+	if (ret)
+		dsc->scr_rev = 0;
+	else
+		dsc->scr_rev = data & 0xff;
+
+	ret = of_property_read_u32(np, "qcom,mdss-slice-height", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read dsc slice height\n");
+		goto err;
+	}
+	dsc->drm.slice_height = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-slice-width", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read dsc slice width\n");
+		goto err;
+	}
+	dsc->drm.slice_width = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-slice-per-pkt", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read mdss-slice-per-pkt\n");
+		goto err;
+	}
+	dsc->slice_per_pkt = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-bit-per-component", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read mdss-bit-per-component\n");
+		goto err;
+	}
+	dsc->drm.bits_per_component = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-bit-per-pixel", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read bit-per-pixel\n");
+		goto err;
+	}
+	dsc->drm.bits_per_pixel = data;
+
+	dsc->drm.block_pred_enable = of_property_read_bool(np,
+			 "qcom,mdss-block-prediction-enable");
+
+	dsi_populate_dsc_params(dsc);
+
+	msm_host->dsc = dsc;
+
+	return 0;
+
+err:
+	kfree(dsc);
+	return ret;
+}
+
 static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
@@ -1763,6 +1926,13 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 		return 0;
 	}
 
+	ret = dsi_host_parse_dsc(msm_host, np);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: invalid dsc configuration %d\n", __func__, ret);
+		ret = -EINVAL;
+		goto err;
+	}
+
 	ret = dsi_host_parse_lane_data(msm_host, endpoint);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "%s: invalid lane configuration %d\n",
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 2668941df529..26661dd43936 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -30,6 +30,7 @@
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_dsc.h>
 #include <drm/msm_drm.h>
 #include <drm/drm_gem.h>
 
@@ -70,6 +71,16 @@ enum msm_mdp_plane_property {
 #define MSM_GPU_MAX_RINGS 4
 #define MAX_H_TILES_PER_DISPLAY 2
 
+/**
+ * enum msm_display_compression_type - compression method used for pixel stream
+ * @MSM_DISPLAY_COMPRESSION_NONE:	Pixel data is not compressed
+ * @MSM_DISPLAY_COMPRESSION_DSC:	DSC compresison is used
+ */
+enum msm_display_compression_type {
+	MSM_DISPLAY_COMPRESSION_NONE,
+	MSM_DISPLAY_COMPRESSION_DSC,
+};
+
 /**
  * enum msm_display_caps - features/capabilities supported by displays
  * @MSM_DISPLAY_CAP_VID_MODE:           Video or "active" mode supported
@@ -134,6 +145,24 @@ struct msm_drm_thread {
 	struct kthread_worker *worker;
 };
 
+/* DSC config */
+struct msm_display_dsc_config {
+	struct drm_dsc_config drm;
+	u8 scr_rev;
+
+	u32 initial_lines;
+	u32 pkt_per_line;
+	u32 bytes_in_slice;
+	u32 bytes_per_pkt;
+	u32 eol_byte_num;
+	u32 pclk_per_line;
+	u32 slice_last_group_size;
+	u32 slice_per_pkt;
+	u32 det_thresh_flatness;
+	u32 extra_width;
+	u32 pps_delay_ms;
+};
+
 struct msm_drm_private {
 
 	struct drm_device *dev;
@@ -227,6 +256,9 @@ struct msm_drm_private {
 	/* Properties */
 	struct drm_property *plane_property[PLANE_PROP_MAX_NUM];
 
+	/* DSC configuration */
+	struct msm_display_dsc_config *dsc;
+
 	/* VRAM carveout, used when no IOMMU: */
 	struct {
 		unsigned long size;
-- 
2.26.3


WARNING: multiple messages have this Message-ID
From: Vinod Koul <vkoul@kernel.org>
To: Rob Clark <robdclark@gmail.com>
Cc: Jonathan Marek <jonathan@marek.ca>,
	David Airlie <airlied@linux.ie>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	dri-devel@lists.freedesktop.org,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	freedreno@lists.freedesktop.org
Subject: [RFC PATCH 03/13] drm/msm/dsi: add support for dsc data
Date: Fri, 21 May 2021 18:19:33 +0530	[thread overview]
Message-ID: <20210521124946.3617862-5-vkoul@kernel.org> (raw)
In-Reply-To: <20210521124946.3617862-1-vkoul@kernel.org>

DSC needs some configuration from device tree, add support to read and
store these params and add DSC structures in msm_drv

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 170 +++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/msm_drv.h      |  32 ++++++
 2 files changed, 202 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 8a10e4343281..864d3c655e73 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -156,6 +156,7 @@ struct msm_dsi_host {
 	struct regmap *sfpb;
 
 	struct drm_display_mode *mode;
+	struct msm_display_dsc_config *dsc;
 
 	/* connected device info */
 	struct device_node *device_node;
@@ -1744,6 +1745,168 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
 	return -EINVAL;
 }
 
+static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
+	0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62,
+	0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
+};
+
+/* only 8bpc, 8bpp added */
+static char min_qp[DSC_NUM_BUF_RANGES] = {
+	0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13
+};
+
+static char max_qp[DSC_NUM_BUF_RANGES] = {
+	4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15
+};
+
+static char bpg_offset[DSC_NUM_BUF_RANGES] = {
+	2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
+};
+
+static int dsi_populate_dsc_params(struct msm_display_dsc_config *dsc)
+{
+	int i;
+
+	dsc->drm.rc_model_size = 8192;
+	dsc->drm.first_line_bpg_offset = 15;
+	dsc->drm.rc_edge_factor = 6;
+	dsc->drm.rc_tgt_offset_high = 3;
+	dsc->drm.rc_tgt_offset_low = 3;
+	dsc->drm.simple_422 = 0;
+	dsc->drm.convert_rgb = 1;
+	dsc->drm.vbr_enable = 0;
+
+	/* handle only bpp = bpc = 8 */
+	for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++)
+		dsc->drm.rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i];
+
+	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+		dsc->drm.rc_range_params[i].range_min_qp = min_qp[i];
+		dsc->drm.rc_range_params[i].range_max_qp = max_qp[i];
+		dsc->drm.rc_range_params[i].range_bpg_offset = bpg_offset[i];
+	}
+
+	dsc->drm.initial_offset = 6144;
+	dsc->drm.initial_xmit_delay = 512;
+	dsc->drm.initial_scale_value = 32;
+	dsc->drm.first_line_bpg_offset = 12;
+	dsc->drm.line_buf_depth = dsc->drm.bits_per_component + 1;
+
+	/* bpc 8 */
+	dsc->drm.flatness_min_qp = 3;
+	dsc->drm.flatness_max_qp = 12;
+	dsc->det_thresh_flatness = 7;
+	dsc->drm.rc_quant_incr_limit0 = 11;
+	dsc->drm.rc_quant_incr_limit1 = 11;
+	dsc->drm.mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
+
+	/* FIXME: need to call drm_dsc_compute_rc_parameters() so that rest of
+	 * params are calculated
+	 */
+
+	i = dsc->drm.slice_width % 3;
+	switch (i) {
+	case 0:
+		dsc->slice_last_group_size = 2;
+		break;
+
+	case 1:
+		dsc->slice_last_group_size = 0;
+		break;
+
+	case 2:
+		dsc->slice_last_group_size = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int dsi_host_parse_dsc(struct msm_dsi_host *msm_host,
+			      struct device_node *np)
+{
+	struct device *dev = &msm_host->pdev->dev;
+	struct msm_display_dsc_config *dsc;
+	bool is_dsc_enabled;
+	u32 data;
+	int ret;
+
+	is_dsc_enabled = of_property_read_bool(np, "qcom,mdss-dsc-enabled");
+
+	if (!is_dsc_enabled)
+		return 0;
+
+	dsc = kzalloc(sizeof(*dsc), GFP_KERNEL);
+	if (!dsc)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(np, "qcom,mdss-dsc-version", &data);
+	if (ret) {
+		dsc->drm.dsc_version_major = 0x1;
+		dsc->drm.dsc_version_minor = 0x1;
+	} else {
+		dsc->drm.dsc_version_major = (data >> 4) & 0xf;
+		dsc->drm.dsc_version_minor = data & 0xf;
+	}
+
+	ret = of_property_read_u32(np, "qcom,mdss-scr-version", &data);
+	if (ret)
+		dsc->scr_rev = 0;
+	else
+		dsc->scr_rev = data & 0xff;
+
+	ret = of_property_read_u32(np, "qcom,mdss-slice-height", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read dsc slice height\n");
+		goto err;
+	}
+	dsc->drm.slice_height = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-slice-width", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read dsc slice width\n");
+		goto err;
+	}
+	dsc->drm.slice_width = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-slice-per-pkt", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read mdss-slice-per-pkt\n");
+		goto err;
+	}
+	dsc->slice_per_pkt = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-bit-per-component", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read mdss-bit-per-component\n");
+		goto err;
+	}
+	dsc->drm.bits_per_component = data;
+
+	ret = of_property_read_u32(np, "qcom,mdss-bit-per-pixel", &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read bit-per-pixel\n");
+		goto err;
+	}
+	dsc->drm.bits_per_pixel = data;
+
+	dsc->drm.block_pred_enable = of_property_read_bool(np,
+			 "qcom,mdss-block-prediction-enable");
+
+	dsi_populate_dsc_params(dsc);
+
+	msm_host->dsc = dsc;
+
+	return 0;
+
+err:
+	kfree(dsc);
+	return ret;
+}
+
 static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
@@ -1763,6 +1926,13 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 		return 0;
 	}
 
+	ret = dsi_host_parse_dsc(msm_host, np);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "%s: invalid dsc configuration %d\n", __func__, ret);
+		ret = -EINVAL;
+		goto err;
+	}
+
 	ret = dsi_host_parse_lane_data(msm_host, endpoint);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "%s: invalid lane configuration %d\n",
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 2668941df529..26661dd43936 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -30,6 +30,7 @@
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_dsc.h>
 #include <drm/msm_drm.h>
 #include <drm/drm_gem.h>
 
@@ -70,6 +71,16 @@ enum msm_mdp_plane_property {
 #define MSM_GPU_MAX_RINGS 4
 #define MAX_H_TILES_PER_DISPLAY 2
 
+/**
+ * enum msm_display_compression_type - compression method used for pixel stream
+ * @MSM_DISPLAY_COMPRESSION_NONE:	Pixel data is not compressed
+ * @MSM_DISPLAY_COMPRESSION_DSC:	DSC compresison is used
+ */
+enum msm_display_compression_type {
+	MSM_DISPLAY_COMPRESSION_NONE,
+	MSM_DISPLAY_COMPRESSION_DSC,
+};
+
 /**
  * enum msm_display_caps - features/capabilities supported by displays
  * @MSM_DISPLAY_CAP_VID_MODE:           Video or "active" mode supported
@@ -134,6 +145,24 @@ struct msm_drm_thread {
 	struct kthread_worker *worker;
 };
 
+/* DSC config */
+struct msm_display_dsc_config {
+	struct drm_dsc_config drm;
+	u8 scr_rev;
+
+	u32 initial_lines;
+	u32 pkt_per_line;
+	u32 bytes_in_slice;
+	u32 bytes_per_pkt;
+	u32 eol_byte_num;
+	u32 pclk_per_line;
+	u32 slice_last_group_size;
+	u32 slice_per_pkt;
+	u32 det_thresh_flatness;
+	u32 extra_width;
+	u32 pps_delay_ms;
+};
+
 struct msm_drm_private {
 
 	struct drm_device *dev;
@@ -227,6 +256,9 @@ struct msm_drm_private {
 	/* Properties */
 	struct drm_property *plane_property[PLANE_PROP_MAX_NUM];
 
+	/* DSC configuration */
+	struct msm_display_dsc_config *dsc;
+
 	/* VRAM carveout, used when no IOMMU: */
 	struct {
 		unsigned long size;
-- 
2.26.3


  parent reply	other threads:[~2021-05-21 12:50 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 12:49 [RFC PATCH 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
2021-05-21 12:49 ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 01/13] drm/dsc: Add dsc pps header init function Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 15:29   ` Daniel Vetter
2021-05-21 15:29     ` Daniel Vetter
2021-05-24  7:26     ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 02/13] dt-bindings: msm/dsi: Document Display Stream Compression (DSC) parameters Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 13:18   ` Rob Herring
2021-05-21 13:18     ` Rob Herring
2021-05-21 13:23     ` Vinod Koul
2021-05-21 13:23       ` Vinod Koul
2021-05-21 14:42   ` Bjorn Andersson
2021-05-21 14:42     ` Bjorn Andersson
2021-05-24  7:30     ` Vinod Koul
2021-05-24  7:30       ` Vinod Koul
2021-05-24 15:08       ` Bjorn Andersson
2021-05-24 15:08         ` Bjorn Andersson
2021-05-26  5:32         ` Vinod Koul
2021-05-26  5:32           ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 03/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-27 23:49   ` Dmitry Baryshkov
2021-05-27 23:49     ` Dmitry Baryshkov
2021-05-21 12:49 ` Vinod Koul [this message]
2021-05-21 12:49   ` [RFC PATCH 03/13] drm/msm/dsi: add support for dsc data Vinod Koul
2021-05-27 23:45   ` Dmitry Baryshkov
2021-05-27 23:45     ` Dmitry Baryshkov
2021-06-02 11:06     ` Vinod Koul
2021-06-02 11:06       ` Vinod Koul
2021-05-28 10:29   ` Dmitry Baryshkov
2021-05-28 10:29     ` Dmitry Baryshkov
2021-06-02 11:17     ` Vinod Koul
2021-06-02 11:17       ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 04/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 04/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:31   ` Dmitry Baryshkov
2021-05-28 10:31     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 05/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 05/13] drm/msm/dsi: add support for dsc data Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 06/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:33   ` Dmitry Baryshkov
2021-05-28 10:33     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 07/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 08/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 09/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:36   ` Dmitry Baryshkov
2021-05-28 10:36     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 09/13] drm/msm/disp/dpu1: Dont " Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 10/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 11/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:39   ` Dmitry Baryshkov
2021-05-28 10:39     ` Dmitry Baryshkov
2021-05-28 22:23     ` abhinavk
2021-05-28 22:23       ` abhinavk
2021-05-28 22:29       ` Dmitry Baryshkov
2021-05-28 22:29         ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 14:09 ` [Freedreno] [RFC PATCH 00/13] drm/msm: Add Display Stream Compression Support Jeffrey Hugo
2021-05-21 14:09   ` Jeffrey Hugo
2021-05-26  5:46   ` Vinod Koul
2021-05-26  5:46     ` Vinod Koul
2021-05-26 15:00     ` Jeffrey Hugo
2021-05-26 15:00       ` Jeffrey Hugo
2021-05-27 23:30       ` Rob Clark
2021-05-27 23:30         ` Rob Clark
2021-06-02 11:01         ` Vinod Koul
2021-06-02 11:01           ` Vinod Koul
2021-06-03 23:40           ` abhinavk
2021-06-03 23:40             ` abhinavk
2021-06-17  8:06             ` Vinod Koul
2021-06-17  8:06               ` Vinod Koul
2021-06-04  2:36           ` Rob Clark
2021-06-04  2:36             ` Rob Clark
2021-06-02 10:56       ` Vinod Koul
2021-06-02 10:56         ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521124946.3617862-5-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.