All of lore.kernel.org
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Ben Widawsky <ben.widawsky@intel.com>,
	Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/5] cxl/mem: Introduce cxl_decode_register_block()
Date: Fri, 21 May 2021 17:11:50 -0700	[thread overview]
Message-ID: <20210522001154.2680157-2-ira.weiny@intel.com> (raw)
In-Reply-To: <20210522001154.2680157-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

Each register block located in the DVSEC needs to be decoded from 2
words, 'register offset high' and 'register offset low'.

Create a function, cxl_decode_register_block() to perform this decode
and return the bar, offset, and register type of the register block.

Then use the values decoded in cxl_mem_map_regblock() instead of passing
the raw registers.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes for V2:
	Push this to the start of the series
---
 drivers/cxl/pci.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 8bdae74d7d78..b2f978954daa 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -922,17 +922,13 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev)
 	return cxlm;
 }
 
-static void __iomem *cxl_mem_map_regblock(struct cxl_mem *cxlm, u32 reg_lo, u32 reg_hi)
+static void __iomem *cxl_mem_map_regblock(struct cxl_mem *cxlm,
+					  u8 bar, u64 offset)
 {
 	struct pci_dev *pdev = cxlm->pdev;
 	struct device *dev = &pdev->dev;
-	u64 offset;
-	u8 bar;
 	int rc;
 
-	offset = ((u64)reg_hi << 32) | (reg_lo & CXL_REGLOC_ADDR_MASK);
-	bar = FIELD_GET(CXL_REGLOC_BIR_MASK, reg_lo);
-
 	/* Basic sanity check that BAR is big enough */
 	if (pci_resource_len(pdev, bar) < offset) {
 		dev_err(dev, "BAR%d: %pr: too small (offset: %#llx)\n", bar,
@@ -974,6 +970,14 @@ static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
 	return 0;
 }
 
+static void cxl_decode_register_block(u32 reg_lo, u32 reg_hi,
+				      u8 *bar, u64 *offset, u8 *reg_type)
+{
+	*offset = ((u64)reg_hi << 32) | (reg_lo & CXL_REGLOC_ADDR_MASK);
+	*bar = FIELD_GET(CXL_REGLOC_BIR_MASK, reg_lo);
+	*reg_type = FIELD_GET(CXL_REGLOC_RBI_MASK, reg_lo);
+}
+
 /**
  * cxl_mem_setup_regs() - Setup necessary MMIO.
  * @cxlm: The CXL memory device to communicate with.
@@ -1009,15 +1013,21 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 	for (i = 0; i < regblocks; i++, regloc += 8) {
 		u32 reg_lo, reg_hi;
 		u8 reg_type;
+		u64 offset;
+		u8 bar;
 
 		/* "register low and high" contain other bits */
 		pci_read_config_dword(pdev, regloc, &reg_lo);
 		pci_read_config_dword(pdev, regloc + 4, &reg_hi);
 
-		reg_type = FIELD_GET(CXL_REGLOC_RBI_MASK, reg_lo);
+		cxl_decode_register_block(reg_lo, reg_hi, &bar, &offset,
+					  &reg_type);
+
+		dev_dbg(dev, "Found register block in bar %u @ 0x%llx of type %u\n",
+			bar, offset, reg_type);
 
 		if (reg_type == CXL_REGLOC_RBI_MEMDEV) {
-			base = cxl_mem_map_regblock(cxlm, reg_lo, reg_hi);
+			base = cxl_mem_map_regblock(cxlm, bar, offset);
 			if (IS_ERR(base))
 				return PTR_ERR(base);
 			break;
-- 
2.28.0.rc0.12.gb6a658bd00c9


  reply	other threads:[~2021-05-22  0:12 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-22  0:11 [PATCH v2 0/5] Map register blocks individually ira.weiny
2021-05-22  0:11 ` ira.weiny [this message]
2021-05-25  9:53   ` [PATCH v2 1/5] cxl/mem: Introduce cxl_decode_register_block() Jonathan Cameron
2021-05-22  0:11 ` [PATCH v2 2/5] cxl/mem: Reserve all device regions at once ira.weiny
2021-05-25  9:54   ` Jonathan Cameron
2021-05-22  0:11 ` [PATCH v2 3/5] cxl/mem: Map registers based on capabilities ira.weiny
2021-05-25  9:52   ` Jonathan Cameron
2021-05-27 17:53     ` Ira Weiny
2021-05-22  0:11 ` [PATCH v2 4/5] cxl/mem: Reserve individual register block regions ira.weiny
2021-05-25  9:59   ` Jonathan Cameron
2021-05-22  0:11 ` [PATCH v2 5/5] cxl: Add HDM decoder capbilities ira.weiny
2021-05-25 14:28   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210522001154.2680157-2-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=ben.widawsky@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.