All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema
@ 2021-05-25 17:58 Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 1/5] ARM: dts: am335x: align GPIO hog names with dt-schema Grygorii Strashko
                   ` (5 more replies)
  0 siblings, 6 replies; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-25 17:58 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju,
	Grygorii Strashko

Hi

Convert the OMAP GPIO Device Tree binding documentation to json-schema.
The GPIO hogs node names defined to end with a 'hog' suffix.

All existing GPIO Hogs fixed to follow above naming convention
before changing the binding to avoid dtbs_check warnings.

Changes in v2:
- Patch 5 fixed "wrong indentation" warning

v1: https://lore.kernel.org/patchwork/cover/1434566/

Grygorii Strashko (5):
  ARM: dts: am335x: align GPIO hog names with dt-schema
  ARM: dts: am437x: align gpio hog names with dt-schema
  ARM: dts: omap3: align gpio hog names with dt-schema
  ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  dt-bindings: gpio: omap: Convert to json-schema

 .../devicetree/bindings/gpio/gpio-omap.txt    |  45 --------
 .../bindings/gpio/ti,omap-gpio.yaml           | 108 ++++++++++++++++++
 .../boot/dts/am335x-boneblack-wireless.dts    |   2 +-
 arch/arm/boot/dts/am335x-boneblue.dts         |   2 +-
 .../boot/dts/am335x-bonegreen-wireless.dts    |   4 +-
 arch/arm/boot/dts/am335x-icev2.dts            |   4 +-
 arch/arm/boot/dts/am335x-shc.dts              |   8 +-
 arch/arm/boot/dts/am437x-gp-evm.dts           |   4 +-
 arch/arm/boot/dts/am43x-epos-evm.dts          |   2 +-
 .../boot/dts/omap3-evm-processor-common.dtsi  |   2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts           |   2 +-
 arch/arm/boot/dts/omap5-board-common.dtsi     |   2 +-
 12 files changed, 124 insertions(+), 61 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-omap.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml

-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v2 1/5] ARM: dts: am335x: align GPIO hog names with dt-schema
  2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
@ 2021-05-25 17:58 ` Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 2/5] ARM: dts: am437x: align gpio " Grygorii Strashko
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-25 17:58 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju,
	Grygorii Strashko

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am335x-boneblack-wireless.dts | 2 +-
 arch/arm/boot/dts/am335x-boneblue.dts           | 2 +-
 arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 4 ++--
 arch/arm/boot/dts/am335x-icev2.dts              | 4 ++--
 arch/arm/boot/dts/am335x-shc.dts                | 8 ++++----
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 86cad9912906..80116646a3fe 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -101,7 +101,7 @@
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 69acaf4ea0f3..0afcc2ee0b63 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -436,7 +436,7 @@
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 7615327d906a..74db0fc39397 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -101,7 +101,7 @@
 };
 
 &gpio1 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -118,7 +118,7 @@
 /* an external pulldown on U21 pin 4.                                  */
 
 &gpio3 {
-	bt_aud_in {
+	bt-aud-in-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index e923d065304d..5e598ac96dcc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -458,14 +458,14 @@
 };
 
 &gpio3 {
-	p4 {
+	pr1-mii-ctl-hog {
 		gpio-hog;
 		gpios = <4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PR1_MII_CTRL";
 	};
 
-	p10 {
+	mux-mii-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1eaa26533466..2bfe60d32783 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -140,14 +140,14 @@
 };
 
 &gpio1 {
-	hmtc_rst {
+	hmtc-rst-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "homematic_reset";
 	};
 
-	hmtc_prog {
+	hmtc-prog-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		output-high;
@@ -156,14 +156,14 @@
 };
 
 &gpio3 {
-	zgb_rst {
+	zgb-rst-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "zigbee_reset";
 	};
 
-	zgb_boot {
+	zgb-boot-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v2 2/5] ARM: dts: am437x: align gpio hog names with dt-schema
  2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 1/5] ARM: dts: am335x: align GPIO hog names with dt-schema Grygorii Strashko
@ 2021-05-25 17:58 ` Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 3/5] ARM: dts: omap3: " Grygorii Strashko
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-25 17:58 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju,
	Grygorii Strashko

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 4 ++--
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 033b984ff637..e2677682b540 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -786,7 +786,7 @@
 	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
 
-	p23 {
+	sel-emmc-nand-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		/* SelEMMCorNAND selects between eMMC and NAND:
@@ -822,7 +822,7 @@
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p8 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e843cf..d717d5ada812 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -725,7 +725,7 @@
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p1 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v2 3/5] ARM: dts: omap3: align gpio hog names with dt-schema
  2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 1/5] ARM: dts: am335x: align GPIO hog names with dt-schema Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 2/5] ARM: dts: am437x: align gpio " Grygorii Strashko
@ 2021-05-25 17:58 ` Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 4/5] ARM: dts: omap5-board-common: " Grygorii Strashko
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-25 17:58 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju,
	Grygorii Strashko

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/omap3-evm-processor-common.dtsi | 2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..9ce8d81250aa 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v2 4/5] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
                   ` (2 preceding siblings ...)
  2021-05-25 17:58 ` [PATCH v2 3/5] ARM: dts: omap3: " Grygorii Strashko
@ 2021-05-25 17:58 ` Grygorii Strashko
  2021-05-25 17:58 ` [PATCH v2 5/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
  2021-05-26 10:06 ` [PATCH v2 0/5] " Grygorii Strashko
  5 siblings, 0 replies; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-25 17:58 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju,
	Grygorii Strashko

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f13626cfd1..45435bb88c89 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -149,7 +149,7 @@
 
 &gpio8 {
 	/* TI trees use GPIO instead of msecure, see also muxing */
-	p234 {
+	msecure-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v2 5/5] dt-bindings: gpio: omap: Convert to json-schema
  2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
                   ` (3 preceding siblings ...)
  2021-05-25 17:58 ` [PATCH v2 4/5] ARM: dts: omap5-board-common: " Grygorii Strashko
@ 2021-05-25 17:58 ` Grygorii Strashko
  2021-05-26 11:28   ` Bartosz Golaszewski
  2021-05-26 10:06 ` [PATCH v2 0/5] " Grygorii Strashko
  5 siblings, 1 reply; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-25 17:58 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju,
	Grygorii Strashko

Convert the OMAP GPIO Device Tree binding documentation to json-schema.
The GPIO hogs node names defined to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/gpio/gpio-omap.txt    |  45 --------
 .../bindings/gpio/ti,omap-gpio.yaml           | 108 ++++++++++++++++++
 2 files changed, 108 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-omap.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml

diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
deleted file mode 100644
index e57b2cb28f6c..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-OMAP GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "ti,omap2-gpio" for OMAP2 controllers
-  - "ti,omap3-gpio" for OMAP3 controllers
-  - "ti,omap4-gpio" for OMAP4 controllers
-- reg : Physical base address of the controller and length of memory mapped
-  region.
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-- interrupt-controller: Mark the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-- interrupts : The interrupt the controller is rising as output when an
-  interrupt occures
-
-OMAP specific properties:
-- ti,hwmods:		Name of the hwmod associated to the GPIO:
-			"gpio<X>", <X> being the 1-based instance number
-			from the HW spec.
-- ti,gpio-always-on: 	Indicates if a GPIO bank is always powered and
-			so will never lose its logic state.
-
-
-Example:
-
-gpio0: gpio@44e07000 {
-    compatible = "ti,omap4-gpio";
-    reg = <0x44e07000 0x1000>;
-    ti,hwmods = "gpio1";
-    gpio-controller;
-    #gpio-cells = <2>;
-    interrupt-controller;
-    #interrupt-cells = <2>;
-    interrupts = <96>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
new file mode 100644
index 000000000000..7087e4a5013f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP GPIO controller bindings
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The general-purpose interface combines general-purpose input/output (GPIO) banks.
+  Each GPIO banks provides up to 32 dedicated general-purpose pins with input
+  and output capabilities; interrupt generation in active mode and wake-up
+  request generation in idle mode upon the detection of external events.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2-gpio
+          - ti,omap3-gpio
+          - ti,omap4-gpio
+      - items:
+          - const: ti,am4372-gpio
+          - const: ti,omap4-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  ti,gpio-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if a GPIO bank is always powered and will never lose its logic state.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Name of the hwmod associated with the GPIO. Needed on some legacy OMAP
+      SoCs which have not been converted to the ti,sysc interconnect hierarachy.
+
+  ti,no-reset-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which
+      have not been converted to the ti,sysc interconnect hierarachy.
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio0: gpio@0 {
+        compatible = "ti,omap4-gpio";
+        reg = <0x0 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <96>;
+        ti,gpio-always-on;
+
+        ls-buf-en-hog {
+            gpio-hog;
+            gpios = <10 GPIO_ACTIVE_HIGH>;
+            output-high;
+            line-name = "LS_BUF_EN";
+        };
+    };
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema
  2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
                   ` (4 preceding siblings ...)
  2021-05-25 17:58 ` [PATCH v2 5/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
@ 2021-05-26 10:06 ` Grygorii Strashko
  2021-05-27 12:01   ` Tony Lindgren
  5 siblings, 1 reply; 9+ messages in thread
From: Grygorii Strashko @ 2021-05-26 10:06 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	Tony Lindgren, devicetree
  Cc: linux-gpio, linux-kernel, linux-omap, Aswath Govindraju

Hi Tony, Linus, Bartosz,

On 25/05/2021 20:58, Grygorii Strashko wrote:
> Hi
> 
> Convert the OMAP GPIO Device Tree binding documentation to json-schema.
> The GPIO hogs node names defined to end with a 'hog' suffix.
> 
> All existing GPIO Hogs fixed to follow above naming convention
> before changing the binding to avoid dtbs_check warnings.

There is one note. The DT bindings change, without DTS changes, will
cause dtbs_check warnings, so all these patches better to be merged through one tree.

> 
> Changes in v2:
> - Patch 5 fixed "wrong indentation" warning
> 
> v1: https://lore.kernel.org/patchwork/cover/1434566/
> 
> Grygorii Strashko (5):
>    ARM: dts: am335x: align GPIO hog names with dt-schema
>    ARM: dts: am437x: align gpio hog names with dt-schema
>    ARM: dts: omap3: align gpio hog names with dt-schema
>    ARM: dts: omap5-board-common: align gpio hog names with dt-schema
>    dt-bindings: gpio: omap: Convert to json-schema
> 
>   .../devicetree/bindings/gpio/gpio-omap.txt    |  45 --------
>   .../bindings/gpio/ti,omap-gpio.yaml           | 108 ++++++++++++++++++
>   .../boot/dts/am335x-boneblack-wireless.dts    |   2 +-
>   arch/arm/boot/dts/am335x-boneblue.dts         |   2 +-
>   .../boot/dts/am335x-bonegreen-wireless.dts    |   4 +-
>   arch/arm/boot/dts/am335x-icev2.dts            |   4 +-
>   arch/arm/boot/dts/am335x-shc.dts              |   8 +-
>   arch/arm/boot/dts/am437x-gp-evm.dts           |   4 +-
>   arch/arm/boot/dts/am43x-epos-evm.dts          |   2 +-
>   .../boot/dts/omap3-evm-processor-common.dtsi  |   2 +-
>   arch/arm/boot/dts/omap3-gta04a5.dts           |   2 +-
>   arch/arm/boot/dts/omap5-board-common.dtsi     |   2 +-
>   12 files changed, 124 insertions(+), 61 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-omap.txt
>   create mode 100644 Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
> 

-- 
Best regards,
grygorii

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 5/5] dt-bindings: gpio: omap: Convert to json-schema
  2021-05-25 17:58 ` [PATCH v2 5/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
@ 2021-05-26 11:28   ` Bartosz Golaszewski
  0 siblings, 0 replies; 9+ messages in thread
From: Bartosz Golaszewski @ 2021-05-26 11:28 UTC (permalink / raw)
  To: Grygorii Strashko
  Cc: Linus Walleij, Santosh Shilimkar, Tony Lindgren,
	linux-devicetree, linux-gpio, LKML, Linux-OMAP,
	Aswath Govindraju

On Tue, May 25, 2021 at 7:59 PM Grygorii Strashko
<grygorii.strashko@ti.com> wrote:
>
> Convert the OMAP GPIO Device Tree binding documentation to json-schema.
> The GPIO hogs node names defined to end with a 'hog' suffix.
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied, thanks!

Bart

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema
  2021-05-26 10:06 ` [PATCH v2 0/5] " Grygorii Strashko
@ 2021-05-27 12:01   ` Tony Lindgren
  0 siblings, 0 replies; 9+ messages in thread
From: Tony Lindgren @ 2021-05-27 12:01 UTC (permalink / raw)
  To: Grygorii Strashko
  Cc: Linus Walleij, Bartosz Golaszewski, Santosh Shilimkar,
	devicetree, linux-gpio, linux-kernel, linux-omap,
	Aswath Govindraju

* Grygorii Strashko <grygorii.strashko@ti.com> [210526 10:06]:
> Hi Tony, Linus, Bartosz,
> 
> On 25/05/2021 20:58, Grygorii Strashko wrote:
> > Hi
> > 
> > Convert the OMAP GPIO Device Tree binding documentation to json-schema.
> > The GPIO hogs node names defined to end with a 'hog' suffix.
> > 
> > All existing GPIO Hogs fixed to follow above naming convention
> > before changing the binding to avoid dtbs_check warnings.
> 
> There is one note. The DT bindings change, without DTS changes, will
> cause dtbs_check warnings, so all these patches better to be merged through one tree.

So with the binding changes applied, I'm applying the dts changes
to omap-for-v5.14/dt thanks.

Regards,

Tony

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-05-27 12:01 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-25 17:58 [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
2021-05-25 17:58 ` [PATCH v2 1/5] ARM: dts: am335x: align GPIO hog names with dt-schema Grygorii Strashko
2021-05-25 17:58 ` [PATCH v2 2/5] ARM: dts: am437x: align gpio " Grygorii Strashko
2021-05-25 17:58 ` [PATCH v2 3/5] ARM: dts: omap3: " Grygorii Strashko
2021-05-25 17:58 ` [PATCH v2 4/5] ARM: dts: omap5-board-common: " Grygorii Strashko
2021-05-25 17:58 ` [PATCH v2 5/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
2021-05-26 11:28   ` Bartosz Golaszewski
2021-05-26 10:06 ` [PATCH v2 0/5] " Grygorii Strashko
2021-05-27 12:01   ` Tony Lindgren

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.