[PATCH 0/2] arm: qcom: Add SMP support for Cortex-A7

[PATCH 0/2] arm: qcom: Add SMP support for Cortex-A7

[Bartosz Dudziak]

Add SMP support for a Cortex-A7 CPU in Qualcomm Snapdragon 200 SoCs:
  - MSM8210, MSM8610. MSM8212, MSM8612, MSM8909
and in Snapdragon 400 SoCs:
  - APQ8026, MSM8x26, MSM8x28

Bartosz Dudziak (2):
  dt-bindings: arm: Document qcom,cpss-acc
  arm: qcom: Add SMP support for Cortex-A7

 .../devicetree/bindings/arm/cpus.yaml         |  7 +-
 .../bindings/arm/msm/qcom,cpss-acc.yaml       | 41 +++++++++++
 arch/arm/mach-qcom/platsmp.c                  | 72 +++++++++++++++++++
 3 files changed, 117 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml

-- 
2.25.1

[PATCH 0/2] arm: qcom: Add SMP support for Cortex-A7

[Bartosz Dudziak]

Add SMP support for a Cortex-A7 CPU in Qualcomm Snapdragon 200 SoCs:
  - MSM8210, MSM8610. MSM8212, MSM8612, MSM8909
and in Snapdragon 400 SoCs:
  - APQ8026, MSM8x26, MSM8x28

Bartosz Dudziak (2):
  dt-bindings: arm: Document qcom,cpss-acc
  arm: qcom: Add SMP support for Cortex-A7

 .../devicetree/bindings/arm/cpus.yaml         |  7 +-
 .../bindings/arm/msm/qcom,cpss-acc.yaml       | 41 +++++++++++
 arch/arm/mach-qcom/platsmp.c                  | 72 +++++++++++++++++++
 3 files changed, 117 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] dt-bindings: arm: Document qcom,cpss-acc

[Bartosz Dudziak]

The CPSS ACC binding describes the clock, reset, and power domain
controller for a Cortex-A7 CPU.

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 .../devicetree/bindings/arm/cpus.yaml         |  7 ++--
 .../bindings/arm/msm/qcom,cpss-acc.yaml       | 41 +++++++++++++++++++
 2 files changed, 45 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 26b886b20b..f391e15184 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -204,6 +204,7 @@ properties:
           - marvell,mmp3-smp
           - mediatek,mt6589-smp
           - mediatek,mt81xx-tz-smp
+          - qcom,cpss-acc
           - qcom,gcc-msm8660
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
@@ -276,7 +277,7 @@ properties:
       Specifies the SAW* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
 
       * arm/msm/qcom,saw2.txt
 
@@ -286,9 +287,9 @@ properties:
       Specifies the ACC* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
 
-      * arm/msm/qcom,kpss-acc.txt
+      * arm/msm/qcom,kpss-acc.txt or arm/msm/qcom,cpss-acc.yaml
 
   rockchip,pmu:
     $ref: '/schemas/types.yaml#/definitions/phandle'
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
new file mode 100644
index 0000000000..54efbc5e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/msm/qcom,cpss-acc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortex-A7 Processor Sub-system (CPSS) Application Clock Controller (ACC)
+
+maintainers:
+  - Kumar Gala <galak@codeaurora.org>
+
+description: |
+  The CPSS ACC provides clock, power domain, and reset control to a Cortex-A7
+  processor. There is one ACC register region per CPU within the PSS remapped
+  region as well as an alias register region that remaps accesses to the ACC
+  associated with the CPU accessing the region.
+
+properties:
+  compatible:
+    enum:
+      - qcom,cpss-acc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: ACC base register region
+      - description: optional ACC alias register region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f9088000 {
+      compatible = "qcom,cpss-acc";
+      reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+    };
-- 
2.25.1

[PATCH 1/2] dt-bindings: arm: Document qcom,cpss-acc

[Bartosz Dudziak]

The CPSS ACC binding describes the clock, reset, and power domain
controller for a Cortex-A7 CPU.

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 .../devicetree/bindings/arm/cpus.yaml         |  7 ++--
 .../bindings/arm/msm/qcom,cpss-acc.yaml       | 41 +++++++++++++++++++
 2 files changed, 45 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 26b886b20b..f391e15184 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -204,6 +204,7 @@ properties:
           - marvell,mmp3-smp
           - mediatek,mt6589-smp
           - mediatek,mt81xx-tz-smp
+          - qcom,cpss-acc
           - qcom,gcc-msm8660
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
@@ -276,7 +277,7 @@ properties:
       Specifies the SAW* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
 
       * arm/msm/qcom,saw2.txt
 
@@ -286,9 +287,9 @@ properties:
       Specifies the ACC* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
 
-      * arm/msm/qcom,kpss-acc.txt
+      * arm/msm/qcom,kpss-acc.txt or arm/msm/qcom,cpss-acc.yaml
 
   rockchip,pmu:
     $ref: '/schemas/types.yaml#/definitions/phandle'
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
new file mode 100644
index 0000000000..54efbc5e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/msm/qcom,cpss-acc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortex-A7 Processor Sub-system (CPSS) Application Clock Controller (ACC)
+
+maintainers:
+  - Kumar Gala <galak@codeaurora.org>
+
+description: |
+  The CPSS ACC provides clock, power domain, and reset control to a Cortex-A7
+  processor. There is one ACC register region per CPU within the PSS remapped
+  region as well as an alias register region that remaps accesses to the ACC
+  associated with the CPU accessing the region.
+
+properties:
+  compatible:
+    enum:
+      - qcom,cpss-acc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: ACC base register region
+      - description: optional ACC alias register region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f9088000 {
+      compatible = "qcom,cpss-acc";
+      reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7

[Bartosz Dudziak]

Implement support for Cortex-A7 CPU release sequence.

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 630a038f45..10780bf14a 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -29,6 +29,7 @@
 #define COREPOR_RST		BIT(5)
 #define CORE_RST		BIT(4)
 #define L2DT_SLP		BIT(3)
+#define CORE_MEM_CLAMP		BIT(1)
 #define CLAMP			BIT(0)
 
 #define APC_PWR_GATE_CTL	0x14
@@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
 	return 0;
 }
 
+static int cortex_a7_release_secondary(unsigned int cpu)
+{
+	int ret = 0;
+	void __iomem *reg;
+	struct device_node *cpu_node, *acc_node;
+	u32 reg_val;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+		ret = -ENODEV;
+		goto out_acc;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_acc_map;
+	}
+
+	/* Put the CPU into reset. */
+	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+	/* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
+	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
+	/* Wait for the BHS to settle */
+	udelay(2);
+
+	reg_val &= ~CORE_MEM_CLAMP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+	reg_val |= L2DT_SLP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+	udelay(2);
+
+	reg_val = (reg_val | BIT(17)) & ~CLAMP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+	udelay(2);
+
+	/* Release CPU out of reset and bring it to life. */
+	reg_val &= ~(CORE_RST | COREPOR_RST);
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+	reg_val |= CORE_PWRD_UP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+out_acc_map:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+
+	return ret;
+}
+
 static int kpssv1_release_secondary(unsigned int cpu)
 {
 	int ret = 0;
@@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return qcom_boot_secondary(cpu, scss_release_secondary);
 }
 
+static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
+}
+
 static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
@@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
 
+static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_boot_secondary	= cortex_a7_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
+
 static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_boot_secondary	= kpssv1_boot_secondary,
-- 
2.25.1

[PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7

[Bartosz Dudziak]

Implement support for Cortex-A7 CPU release sequence.

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 630a038f45..10780bf14a 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -29,6 +29,7 @@
 #define COREPOR_RST		BIT(5)
 #define CORE_RST		BIT(4)
 #define L2DT_SLP		BIT(3)
+#define CORE_MEM_CLAMP		BIT(1)
 #define CLAMP			BIT(0)
 
 #define APC_PWR_GATE_CTL	0x14
@@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
 	return 0;
 }
 
+static int cortex_a7_release_secondary(unsigned int cpu)
+{
+	int ret = 0;
+	void __iomem *reg;
+	struct device_node *cpu_node, *acc_node;
+	u32 reg_val;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+		ret = -ENODEV;
+		goto out_acc;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_acc_map;
+	}
+
+	/* Put the CPU into reset. */
+	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+	/* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
+	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
+	/* Wait for the BHS to settle */
+	udelay(2);
+
+	reg_val &= ~CORE_MEM_CLAMP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+	reg_val |= L2DT_SLP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+	udelay(2);
+
+	reg_val = (reg_val | BIT(17)) & ~CLAMP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+	udelay(2);
+
+	/* Release CPU out of reset and bring it to life. */
+	reg_val &= ~(CORE_RST | COREPOR_RST);
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+	reg_val |= CORE_PWRD_UP;
+	writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+out_acc_map:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+
+	return ret;
+}
+
 static int kpssv1_release_secondary(unsigned int cpu)
 {
 	int ret = 0;
@@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return qcom_boot_secondary(cpu, scss_release_secondary);
 }
 
+static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
+}
+
 static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
@@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
 
+static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_boot_secondary	= cortex_a7_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
+
 static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_boot_secondary	= kpssv1_boot_secondary,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: arm: Document qcom,cpss-acc

[Rob Herring]

On Thu, May 13, 2021 at 05:34:41PM +0200, Bartosz Dudziak wrote:
> The CPSS ACC binding describes the clock, reset, and power domain
> controller for a Cortex-A7 CPU.
> 
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
>  .../devicetree/bindings/arm/cpus.yaml         |  7 ++--
>  .../bindings/arm/msm/qcom,cpss-acc.yaml       | 41 +++++++++++++++++++
>  2 files changed, 45 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index 26b886b20b..f391e15184 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -204,6 +204,7 @@ properties:
>            - marvell,mmp3-smp
>            - mediatek,mt6589-smp
>            - mediatek,mt81xx-tz-smp
> +          - qcom,cpss-acc

This should not be the same as the compatible below.

>            - qcom,gcc-msm8660
>            - qcom,kpss-acc-v1
>            - qcom,kpss-acc-v2
> @@ -276,7 +277,7 @@ properties:
>        Specifies the SAW* node associated with this CPU.
>  
>        Required for systems that have an "enable-method" property
> -      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
> +      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
>  
>        * arm/msm/qcom,saw2.txt
>  
> @@ -286,9 +287,9 @@ properties:
>        Specifies the ACC* node associated with this CPU.
>  
>        Required for systems that have an "enable-method" property
> -      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
> +      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
>  
> -      * arm/msm/qcom,kpss-acc.txt
> +      * arm/msm/qcom,kpss-acc.txt or arm/msm/qcom,cpss-acc.yaml
>  
>    rockchip,pmu:
>      $ref: '/schemas/types.yaml#/definitions/phandle'
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
> new file mode 100644
> index 0000000000..54efbc5e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/msm/qcom,cpss-acc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cortex-A7 Processor Sub-system (CPSS) Application Clock Controller (ACC)
> +
> +maintainers:
> +  - Kumar Gala <galak@codeaurora.org>

Not an active email nor is Kumar maintaining QCom stuff any more.

> +
> +description: |
> +  The CPSS ACC provides clock, power domain, and reset control to a Cortex-A7
> +  processor. There is one ACC register region per CPU within the PSS remapped
> +  region as well as an alias register region that remaps accesses to the ACC
> +  associated with the CPU accessing the region.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,cpss-acc

This needs to be SoC specific.

> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: ACC base register region
> +      - description: optional ACC alias register region
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clock-controller@f9088000 {
> +      compatible = "qcom,cpss-acc";
> +      reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
> +    };
> -- 
> 2.25.1
> 

Re: [PATCH 1/2] dt-bindings: arm: Document qcom,cpss-acc

[Rob Herring]

On Thu, May 13, 2021 at 05:34:41PM +0200, Bartosz Dudziak wrote:
> The CPSS ACC binding describes the clock, reset, and power domain
> controller for a Cortex-A7 CPU.
> 
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
>  .../devicetree/bindings/arm/cpus.yaml         |  7 ++--
>  .../bindings/arm/msm/qcom,cpss-acc.yaml       | 41 +++++++++++++++++++
>  2 files changed, 45 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index 26b886b20b..f391e15184 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -204,6 +204,7 @@ properties:
>            - marvell,mmp3-smp
>            - mediatek,mt6589-smp
>            - mediatek,mt81xx-tz-smp
> +          - qcom,cpss-acc

This should not be the same as the compatible below.

>            - qcom,gcc-msm8660
>            - qcom,kpss-acc-v1
>            - qcom,kpss-acc-v2
> @@ -276,7 +277,7 @@ properties:
>        Specifies the SAW* node associated with this CPU.
>  
>        Required for systems that have an "enable-method" property
> -      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
> +      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
>  
>        * arm/msm/qcom,saw2.txt
>  
> @@ -286,9 +287,9 @@ properties:
>        Specifies the ACC* node associated with this CPU.
>  
>        Required for systems that have an "enable-method" property
> -      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
> +      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,cpss-acc"
>  
> -      * arm/msm/qcom,kpss-acc.txt
> +      * arm/msm/qcom,kpss-acc.txt or arm/msm/qcom,cpss-acc.yaml
>  
>    rockchip,pmu:
>      $ref: '/schemas/types.yaml#/definitions/phandle'
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
> new file mode 100644
> index 0000000000..54efbc5e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,cpss-acc.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/msm/qcom,cpss-acc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cortex-A7 Processor Sub-system (CPSS) Application Clock Controller (ACC)
> +
> +maintainers:
> +  - Kumar Gala <galak@codeaurora.org>

Not an active email nor is Kumar maintaining QCom stuff any more.

> +
> +description: |
> +  The CPSS ACC provides clock, power domain, and reset control to a Cortex-A7
> +  processor. There is one ACC register region per CPU within the PSS remapped
> +  region as well as an alias register region that remaps accesses to the ACC
> +  associated with the CPU accessing the region.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,cpss-acc

This needs to be SoC specific.

> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: ACC base register region
> +      - description: optional ACC alias register region
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clock-controller@f9088000 {
> +      compatible = "qcom,cpss-acc";
> +      reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
> +    };
> -- 
> 2.25.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7

[Stephan Gerhold]

Hi,

On Thu, May 13, 2021 at 05:34:42PM +0200, Bartosz Dudziak wrote:
> Implement support for Cortex-A7 CPU release sequence.
> 
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
>  arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
> index 630a038f45..10780bf14a 100644
> --- a/arch/arm/mach-qcom/platsmp.c
> +++ b/arch/arm/mach-qcom/platsmp.c
> @@ -29,6 +29,7 @@
>  #define COREPOR_RST		BIT(5)
>  #define CORE_RST		BIT(4)
>  #define L2DT_SLP		BIT(3)
> +#define CORE_MEM_CLAMP		BIT(1)
>  #define CLAMP			BIT(0)
>  
>  #define APC_PWR_GATE_CTL	0x14
> @@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
>  	return 0;
>  }
>  
> +static int cortex_a7_release_secondary(unsigned int cpu)
> +{
> +	int ret = 0;
> +	void __iomem *reg;
> +	struct device_node *cpu_node, *acc_node;
> +	u32 reg_val;
> +
> +	cpu_node = of_get_cpu_node(cpu, NULL);
> +	if (!cpu_node)
> +		return -ENODEV;
> +
> +	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
> +	if (!acc_node) {
> +		ret = -ENODEV;
> +		goto out_acc;
> +	}
> +
> +	reg = of_iomap(acc_node, 0);
> +	if (!reg) {
> +		ret = -ENOMEM;
> +		goto out_acc_map;
> +	}
> +
> +	/* Put the CPU into reset. */
> +	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
> +	/* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
> +	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
> +	/* Wait for the BHS to settle */
> +	udelay(2);
> +
> +	reg_val &= ~CORE_MEM_CLAMP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
> +	reg_val |= L2DT_SLP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +	udelay(2);
> +
> +	reg_val = (reg_val | BIT(17)) & ~CLAMP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +	udelay(2);
> +
> +	/* Release CPU out of reset and bring it to life. */
> +	reg_val &= ~(CORE_RST | COREPOR_RST);
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +	reg_val |= CORE_PWRD_UP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +

I think you forgot to add

	iounmap(reg);

here :)

> +out_acc_map:
> +	of_node_put(acc_node);
> +out_acc:
> +	of_node_put(cpu_node);
> +
> +	return ret;
> +}
> +
>  static int kpssv1_release_secondary(unsigned int cpu)
>  {
>  	int ret = 0;
> @@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
>  	return qcom_boot_secondary(cpu, scss_release_secondary);
>  }
>  
> +static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +{
> +	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
> +}
> +
>  static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
>  {
>  	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
> @@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
>  };
>  CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
>  
> +static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
> +	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
> +	.smp_boot_secondary	= cortex_a7_boot_secondary,
> +#ifdef CONFIG_HOTPLUG_CPU
> +	.cpu_die		= qcom_cpu_die,
> +#endif
> +};
> +CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
> +

I'm a bit curious about the name "CPSS". Is that something you came up
with yourself similar to KPSS? There is a slight naming collision here
with the "Chip peripheral subsystem" (CPSS) on APQ8064E (Snapdragon 600),
see https://developer.qualcomm.com/download/sd600/snapdragon-600-device-spec.pdf

Thanks,
Stephan

Re: [PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7

[Stephan Gerhold]

Hi,

On Thu, May 13, 2021 at 05:34:42PM +0200, Bartosz Dudziak wrote:
> Implement support for Cortex-A7 CPU release sequence.
> 
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
>  arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
> index 630a038f45..10780bf14a 100644
> --- a/arch/arm/mach-qcom/platsmp.c
> +++ b/arch/arm/mach-qcom/platsmp.c
> @@ -29,6 +29,7 @@
>  #define COREPOR_RST		BIT(5)
>  #define CORE_RST		BIT(4)
>  #define L2DT_SLP		BIT(3)
> +#define CORE_MEM_CLAMP		BIT(1)
>  #define CLAMP			BIT(0)
>  
>  #define APC_PWR_GATE_CTL	0x14
> @@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
>  	return 0;
>  }
>  
> +static int cortex_a7_release_secondary(unsigned int cpu)
> +{
> +	int ret = 0;
> +	void __iomem *reg;
> +	struct device_node *cpu_node, *acc_node;
> +	u32 reg_val;
> +
> +	cpu_node = of_get_cpu_node(cpu, NULL);
> +	if (!cpu_node)
> +		return -ENODEV;
> +
> +	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
> +	if (!acc_node) {
> +		ret = -ENODEV;
> +		goto out_acc;
> +	}
> +
> +	reg = of_iomap(acc_node, 0);
> +	if (!reg) {
> +		ret = -ENOMEM;
> +		goto out_acc_map;
> +	}
> +
> +	/* Put the CPU into reset. */
> +	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
> +	/* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
> +	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
> +	/* Wait for the BHS to settle */
> +	udelay(2);
> +
> +	reg_val &= ~CORE_MEM_CLAMP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
> +	reg_val |= L2DT_SLP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +	udelay(2);
> +
> +	reg_val = (reg_val | BIT(17)) & ~CLAMP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +	udelay(2);
> +
> +	/* Release CPU out of reset and bring it to life. */
> +	reg_val &= ~(CORE_RST | COREPOR_RST);
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +	reg_val |= CORE_PWRD_UP;
> +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +

I think you forgot to add

	iounmap(reg);

here :)

> +out_acc_map:
> +	of_node_put(acc_node);
> +out_acc:
> +	of_node_put(cpu_node);
> +
> +	return ret;
> +}
> +
>  static int kpssv1_release_secondary(unsigned int cpu)
>  {
>  	int ret = 0;
> @@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
>  	return qcom_boot_secondary(cpu, scss_release_secondary);
>  }
>  
> +static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +{
> +	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
> +}
> +
>  static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
>  {
>  	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
> @@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
>  };
>  CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
>  
> +static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
> +	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
> +	.smp_boot_secondary	= cortex_a7_boot_secondary,
> +#ifdef CONFIG_HOTPLUG_CPU
> +	.cpu_die		= qcom_cpu_die,
> +#endif
> +};
> +CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
> +

I'm a bit curious about the name "CPSS". Is that something you came up
with yourself similar to KPSS? There is a slight naming collision here
with the "Chip peripheral subsystem" (CPSS) on APQ8064E (Snapdragon 600),
see https://developer.qualcomm.com/download/sd600/snapdragon-600-device-spec.pdf

Thanks,
Stephan

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7

[Bartosz Dudziak]

Hi,

On Tue, May 25, 2021 at 02:20:59PM +0200, Stephan Gerhold wrote:
> Hi,
> 
> On Thu, May 13, 2021 at 05:34:42PM +0200, Bartosz Dudziak wrote:
> > Implement support for Cortex-A7 CPU release sequence.
> > 
> > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> > ---
> >  arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 72 insertions(+)
> > 
> > diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
> > index 630a038f45..10780bf14a 100644
> > --- a/arch/arm/mach-qcom/platsmp.c
> > +++ b/arch/arm/mach-qcom/platsmp.c
> > @@ -29,6 +29,7 @@
> >  #define COREPOR_RST		BIT(5)
> >  #define CORE_RST		BIT(4)
> >  #define L2DT_SLP		BIT(3)
> > +#define CORE_MEM_CLAMP		BIT(1)
> >  #define CLAMP			BIT(0)
> >  
> >  #define APC_PWR_GATE_CTL	0x14
> > @@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
> >  	return 0;
> >  }
> >  
> > +static int cortex_a7_release_secondary(unsigned int cpu)
> > +{
> > +	int ret = 0;
> > +	void __iomem *reg;
> > +	struct device_node *cpu_node, *acc_node;
> > +	u32 reg_val;
> > +
> > +	cpu_node = of_get_cpu_node(cpu, NULL);
> > +	if (!cpu_node)
> > +		return -ENODEV;
> > +
> > +	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
> > +	if (!acc_node) {
> > +		ret = -ENODEV;
> > +		goto out_acc;
> > +	}
> > +
> > +	reg = of_iomap(acc_node, 0);
> > +	if (!reg) {
> > +		ret = -ENOMEM;
> > +		goto out_acc_map;
> > +	}
> > +
> > +	/* Put the CPU into reset. */
> > +	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +
> > +	/* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
> > +	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
> > +	/* Wait for the BHS to settle */
> > +	udelay(2);
> > +
> > +	reg_val &= ~CORE_MEM_CLAMP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +
> > +	reg_val |= L2DT_SLP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +	udelay(2);
> > +
> > +	reg_val = (reg_val | BIT(17)) & ~CLAMP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +	udelay(2);
> > +
> > +	/* Release CPU out of reset and bring it to life. */
> > +	reg_val &= ~(CORE_RST | COREPOR_RST);
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +	reg_val |= CORE_PWRD_UP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +
> 
> I think you forgot to add
> 
> 	iounmap(reg);
> 
> here :)
> 

Thank you, i have missed it.

> > +out_acc_map:
> > +	of_node_put(acc_node);
> > +out_acc:
> > +	of_node_put(cpu_node);
> > +
> > +	return ret;
> > +}
> > +
> >  static int kpssv1_release_secondary(unsigned int cpu)
> >  {
> >  	int ret = 0;
> > @@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
> >  	return qcom_boot_secondary(cpu, scss_release_secondary);
> >  }
> >  
> > +static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > +{
> > +	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
> > +}
> > +
> >  static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
> >  {
> >  	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
> > @@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
> >  };
> >  CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
> >  
> > +static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
> > +	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
> > +	.smp_boot_secondary	= cortex_a7_boot_secondary,
> > +#ifdef CONFIG_HOTPLUG_CPU
> > +	.cpu_die		= qcom_cpu_die,
> > +#endif
> > +};
> > +CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
> > +
> 
> I'm a bit curious about the name "CPSS". Is that something you came up
> with yourself similar to KPSS? There is a slight naming collision here
> with the "Chip peripheral subsystem" (CPSS) on APQ8064E (Snapdragon 600),
> see https://developer.qualcomm.com/download/sd600/snapdragon-600-device-spec.pdf
> 
> Thanks,
> Stephan

Yes, the "CPSS" is something i came up with when i was looking at KPSS bindings.
Sorry that i did not check for a naming collision. I will think about a better
name and send a v2 patch on the weekend with iounmap() included.

Thanks for the review,
Bartosz

Re: [PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7

[Bartosz Dudziak]

Hi,

On Tue, May 25, 2021 at 02:20:59PM +0200, Stephan Gerhold wrote:
> Hi,
> 
> On Thu, May 13, 2021 at 05:34:42PM +0200, Bartosz Dudziak wrote:
> > Implement support for Cortex-A7 CPU release sequence.
> > 
> > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> > ---
> >  arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 72 insertions(+)
> > 
> > diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
> > index 630a038f45..10780bf14a 100644
> > --- a/arch/arm/mach-qcom/platsmp.c
> > +++ b/arch/arm/mach-qcom/platsmp.c
> > @@ -29,6 +29,7 @@
> >  #define COREPOR_RST		BIT(5)
> >  #define CORE_RST		BIT(4)
> >  #define L2DT_SLP		BIT(3)
> > +#define CORE_MEM_CLAMP		BIT(1)
> >  #define CLAMP			BIT(0)
> >  
> >  #define APC_PWR_GATE_CTL	0x14
> > @@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
> >  	return 0;
> >  }
> >  
> > +static int cortex_a7_release_secondary(unsigned int cpu)
> > +{
> > +	int ret = 0;
> > +	void __iomem *reg;
> > +	struct device_node *cpu_node, *acc_node;
> > +	u32 reg_val;
> > +
> > +	cpu_node = of_get_cpu_node(cpu, NULL);
> > +	if (!cpu_node)
> > +		return -ENODEV;
> > +
> > +	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
> > +	if (!acc_node) {
> > +		ret = -ENODEV;
> > +		goto out_acc;
> > +	}
> > +
> > +	reg = of_iomap(acc_node, 0);
> > +	if (!reg) {
> > +		ret = -ENOMEM;
> > +		goto out_acc_map;
> > +	}
> > +
> > +	/* Put the CPU into reset. */
> > +	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +
> > +	/* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
> > +	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
> > +	/* Wait for the BHS to settle */
> > +	udelay(2);
> > +
> > +	reg_val &= ~CORE_MEM_CLAMP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +
> > +	reg_val |= L2DT_SLP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +	udelay(2);
> > +
> > +	reg_val = (reg_val | BIT(17)) & ~CLAMP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +	udelay(2);
> > +
> > +	/* Release CPU out of reset and bring it to life. */
> > +	reg_val &= ~(CORE_RST | COREPOR_RST);
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +	reg_val |= CORE_PWRD_UP;
> > +	writel(reg_val, reg + APCS_CPU_PWR_CTL);
> > +
> 
> I think you forgot to add
> 
> 	iounmap(reg);
> 
> here :)
> 

Thank you, i have missed it.

> > +out_acc_map:
> > +	of_node_put(acc_node);
> > +out_acc:
> > +	of_node_put(cpu_node);
> > +
> > +	return ret;
> > +}
> > +
> >  static int kpssv1_release_secondary(unsigned int cpu)
> >  {
> >  	int ret = 0;
> > @@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
> >  	return qcom_boot_secondary(cpu, scss_release_secondary);
> >  }
> >  
> > +static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > +{
> > +	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
> > +}
> > +
> >  static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
> >  {
> >  	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
> > @@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
> >  };
> >  CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
> >  
> > +static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
> > +	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
> > +	.smp_boot_secondary	= cortex_a7_boot_secondary,
> > +#ifdef CONFIG_HOTPLUG_CPU
> > +	.cpu_die		= qcom_cpu_die,
> > +#endif
> > +};
> > +CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
> > +
> 
> I'm a bit curious about the name "CPSS". Is that something you came up
> with yourself similar to KPSS? There is a slight naming collision here
> with the "Chip peripheral subsystem" (CPSS) on APQ8064E (Snapdragon 600),
> see https://developer.qualcomm.com/download/sd600/snapdragon-600-device-spec.pdf
> 
> Thanks,
> Stephan

Yes, the "CPSS" is something i came up with when i was looking at KPSS bindings.
Sorry that i did not check for a naming collision. I will think about a better
name and send a v2 patch on the weekend with iounmap() included.

Thanks for the review,
Bartosz

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel