All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs <linux-xfs@vger.kernel.org>,
	hsiangkao@aol.com, hsiangkao@linux.alibaba.com
Subject: Re: more regressions in xfs/168?
Date: Tue, 25 May 2021 18:28:36 -0700	[thread overview]
Message-ID: <20210526012836.GV202121@locust> (raw)
In-Reply-To: <20210525233727.GL664593@dread.disaster.area>

On Wed, May 26, 2021 at 09:37:27AM +1000, Dave Chinner wrote:
> On Tue, May 25, 2021 at 03:55:56PM -0700, Darrick J. Wong wrote:
> > Hi again,
> > 
> > Even with the fix to the per-AG reservation code applied, I still see
> > periodic failures in xfs/168 if I run with ./check -I 60.  This is
> > what's at the bottom of 168.full:
> > 
> > [EXPERIMENTAL] try to shrink unused space 131446, old size is 131532
> > meta-data=/dev/sdf               isize=512    agcount=2, agsize=129280 blks
> >          =                       sectsz=512   attr=2, projid32bit=1
> >          =                       crc=1        finobt=1, sparse=1, rmapbt=0
> >          =                       reflink=0    bigtime=1 inobtcount=1
> > data     =                       bsize=4096   blocks=131532, imaxpct=25
> >          =                       sunit=0      swidth=0 blks
> > naming   =version 2              bsize=4096   ascii-ci=0, ftype=1
> > log      =internal log           bsize=4096   blocks=1344, version=2
> >          =                       sectsz=512   sunit=0 blks, lazy-count=1
> > realtime =/dev/sdd               extsz=4096   blocks=2579968, rtextents=2579968
> > data blocks changed from 131532 to 131446
> > Phase 1 - find and verify superblock...
> > Only two AGs detected and they do not match - cannot validate filesystem geometry.
> > Use the -o force_geometry option to proceed.
> > xfs_repair failed with shrinking 131446
> > 
> > The kernel log contains this:
> > 
> > [ 2017.388598] XFS (sdf): Internal error !ino_ok at line 205 of file fs/xfs/libxfs/xfs_dir2.c.  Caller xfs_dir_ino_validate+0x4b/0xa0 [xfs]
> > [ 2017.392045] CPU: 3 PID: 49956 Comm: xfsaild/sdf Tainted: G           O      5.13.0-rc3-xfsx #rc3
> > [ 2017.393165] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
> > [ 2017.394166] Call Trace:
> > [ 2017.394488]  dump_stack+0x64/0x7c
> > [ 2017.395117]  xfs_corruption_error+0x85/0x90 [xfs]
> > [ 2017.396362]  ? xfs_dir_ino_validate+0x4b/0xa0 [xfs]
> > [ 2017.397599]  xfs_dir_ino_validate+0x75/0xa0 [xfs]
> > [ 2017.398506]  ? xfs_dir_ino_validate+0x4b/0xa0 [xfs]
> > [ 2017.399655]  xfs_dir2_sf_verify+0x16d/0x2d0 [xfs]
> > [ 2017.400731]  xfs_ifork_verify_local_data+0x33/0x60 [xfs]
> > [ 2017.402019]  xfs_iflush_cluster+0x67f/0x8f0 [xfs]
> > [ 2017.403163]  xfs_inode_item_push+0xa8/0x140 [xfs]
> > [ 2017.404203]  xfsaild+0x42c/0xc50 [xfs]
> > [ 2017.405106]  ? xfs_trans_ail_cursor_first+0x80/0x80 [xfs]
> > [ 2017.406306]  kthread+0x14b/0x170
> > [ 2017.406929]  ? __kthread_bind_mask+0x60/0x60
> > [ 2017.407638]  ret_from_fork+0x1f/0x30
> > [ 2017.408323] XFS (sdf): Corruption detected. Unmount and run xfs_repair
> > [ 2017.409467] XFS (sdf): Invalid inode number 0x104380
> > [ 2017.410301] XFS (sdf): Metadata corruption detected at xfs_dir2_sf_verify+0x268/0x2d0 [xfs], inode 0x4fb6 data fork
> > [ 2017.412095] XFS (sdf): Unmount and run xfs_repair
> > [ 2017.412675] XFS (sdf): First 72 bytes of corrupted metadata buffer:
> > [ 2017.413393] 00000000: 06 00 00 10 42 60 03 00 60 63 37 61 03 00 10 43  ....B`..`c7a...C
> > [ 2017.414286] 00000010: 80 03 00 70 64 38 39 02 00 00 4f bd 03 00 80 72  ...pd89...O....r
> > [ 2017.415390] 00000020: 38 65 01 00 10 43 32 03 00 90 72 61 62 01 00 00  8e...C2...rab...
> > [ 2017.416633] 00000030: 4e 3f 03 00 a0 66 62 34 01 00 00 51 1e 03 00 b0  N?...fb4...Q....
> > [ 2017.417733] 00000040: 63 66 61 03 00 00 50 9e                          cfa...P.
> > [ 2017.418810] XFS (sdf): metadata I/O error in "xfs_buf_ioend+0x219/0x520 [xfs]" at daddr 0x4fa0 len 32 error 5
> > [ 2017.420397] XFS (sdf): xfs_do_force_shutdown(0x8) called from line 2798 of file fs/xfs/xfs_inode.c. Return address = ffffffffa03a6018
> > [ 2017.422171] XFS (sdf): Corruption of in-memory data detected.  Shutting down filesystem
> > [ 2017.423348] XFS (sdf): Please unmount the filesystem and rectify the problem(s)
> > [ 2017.631561] XFS (sda): Unmounting Filesystem
> > 
> > At first glance this /looks/ like we might have shrunk the filesystem
> > too far, after which the shortform directory verifier tripped, which
> > caused a shutdown.  Inode 0x104380 is very close to the end of the
> > filesystem.
> > 
> > I altered xfs/168 to spit out metadumps and captured one here:
> > https://djwong.org/docs/168.iloop.131446.md.xz
> > 
> > I'll keep looking, but on the off chance this rings a bell for anyone.
> > 
> > Wait, something just rang a bell for me.  I was looking through
> > Allison's xattrs patchset and read the comment in xfs_attr_rmtval_set
> > about how it has to perform a "user data" allocation for the remote
> > value blocks because we don't log attr value blocks and therefore cannot
> > overwrite blocks which have recently been freed but their transactions
> > are not yet committed to disk.
> 
> Right - that's what busy extents and the ability to reuse busy
> extents deals with. User data allocations cannot reuse a busy
> extent, they must trim them back to avoid the busy range in the
> allocated extent first. Same with exact allocation
> (XFS_ALLOCTYPE_THIS_BNO) - if there's any busy extents in over the
> range we ask for allocation, the trim will result in a range that
> doesn't match what we asked for and the allocation should fail.
> 
> Hence if there is any busy range over the requested allocation from
> xfs_ag_shrink_space() it should fail because we've set
> XFS_ALLOCTYPE_THIS_BNO and minlen = maxlen = delta.
> 
> > Doesn't shrink have to ensure that the log cannot contain any further
> > updates for the blocks it wants to remove from the filesystem?  In other
> > words, should xfs_ag_shrink_space be setting XFS_ALLOC_USERDATA so that
> > the allocator will make us wait for the EOFS blocks to free up if
> > they're busy?
> 
> That's what xfs_extent_busy_trim() should be handling for us,
> regardless of whether it is userdata or not.

Ahah, yes.  Ok, I'll wire up a tester for my other debugging theory and
see how that goes.

--D

> 
> Cheers,
> 
> Dave.
> -- 
> Dave Chinner
> david@fromorbit.com

      reply	other threads:[~2021-05-26  1:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-25 22:55 more regressions in xfs/168? Darrick J. Wong
2021-05-25 23:05 ` Darrick J. Wong
2021-05-26 16:01   ` Gao Xiang
2021-05-25 23:37 ` Dave Chinner
2021-05-26  1:28   ` Darrick J. Wong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210526012836.GV202121@locust \
    --to=djwong@kernel.org \
    --cc=david@fromorbit.com \
    --cc=hsiangkao@aol.com \
    --cc=hsiangkao@linux.alibaba.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.