* [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
@ 2021-05-26 11:59 Vignesh Raghavendra
2021-05-26 11:59 ` [PATCH 2/2] ARM: dts: am437x-l4: Drop ti,omap2-uart " Vignesh Raghavendra
2021-05-27 12:10 ` [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart " Tony Lindgren
0 siblings, 2 replies; 3+ messages in thread
From: Vignesh Raghavendra @ 2021-05-26 11:59 UTC (permalink / raw)
To: Tony Lindgren
Cc: Rob Herring, linux-omap, devicetree, linux-kernel, Vignesh Raghavendra
ti,omap4-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 149144cdff35..a750f7829f79 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1159,7 +1159,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x20000 0x1000>;
uart3: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1562,7 +1562,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x66000 0x1000>;
uart5: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1594,7 +1594,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x68000 0x1000>;
uart6: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1626,7 +1626,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x6a000 0x1000>;
uart1: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1658,7 +1658,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x6c000 0x1000>;
uart2: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1690,7 +1690,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x6e000 0x1000>;
uart4: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2424,7 +2424,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x20000 0x1000>;
uart7: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2454,7 +2454,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x22000 0x1000>;
uart8: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2484,7 +2484,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x24000 0x1000>;
uart9: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -4530,7 +4530,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xb000 0x1000>;
uart10: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
2021-05-26 11:59 [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes Vignesh Raghavendra
@ 2021-05-26 11:59 ` Vignesh Raghavendra
2021-05-27 12:10 ` [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart " Tony Lindgren
1 sibling, 0 replies; 3+ messages in thread
From: Vignesh Raghavendra @ 2021-05-26 11:59 UTC (permalink / raw)
To: Tony Lindgren
Cc: Rob Herring, linux-omap, devicetree, linux-kernel, Vignesh Raghavendra
ti,omap2-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
arch/arm/boot/dts/am437x-l4.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e217ffc09770..d4daf2f84de9 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -194,7 +194,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x9000 0x1000>;
uart0: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -712,7 +712,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x22000 0x1000>;
uart1: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -740,7 +740,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x24000 0x1000>;
uart2: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1399,7 +1399,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xa6000 0x1000>;
uart3: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1427,7 +1427,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xa8000 0x1000>;
uart4: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1455,7 +1455,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xaa000 0x1000>;
uart5: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
2021-05-26 11:59 [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes Vignesh Raghavendra
2021-05-26 11:59 ` [PATCH 2/2] ARM: dts: am437x-l4: Drop ti,omap2-uart " Vignesh Raghavendra
@ 2021-05-27 12:10 ` Tony Lindgren
1 sibling, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2021-05-27 12:10 UTC (permalink / raw)
To: Vignesh Raghavendra; +Cc: Rob Herring, linux-omap, devicetree, linux-kernel
* Vignesh Raghavendra <vigneshr@ti.com> [210526 15:00]:
> ti,omap4-uart was kept around to work with legacy omap-serial driver.
> Now that we have completed move to 8250-omap.c drop legacy compatible.
> This will simplify writing YAML schema.
Applying both into omap-for-v5.14/dt thanks.
Tony
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-05-27 12:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-26 11:59 [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes Vignesh Raghavendra
2021-05-26 11:59 ` [PATCH 2/2] ARM: dts: am437x-l4: Drop ti,omap2-uart " Vignesh Raghavendra
2021-05-27 12:10 ` [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart " Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.