From: Pratyush Yadav <p.yadav@ti.com> To: Maxime Ripard <mripard@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring <robh+dt@kernel.org>, Pratyush Yadav <p.yadav@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Peter Ujfalusi <peter.ujfalusi@gmail.com>, Steve Longerbeam <slongerbeam@gmail.com>, Benoit Parrot <bparrot@ti.com>, <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>, <dmaengine@vger.kernel.org> Cc: Vignesh Raghavendra <vigneshr@ti.com>, Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>, Chunfeng Yun <chunfeng.yun@mediatek.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Subject: [PATCH v2 00/18] CSI2RX support on J721E Date: Wed, 26 May 2021 20:52:50 +0530 [thread overview] Message-ID: <20210526152308.16525-1-p.yadav@ti.com> (raw) Hi, This series adds support for CSI2 capture on J721E. It includes some fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY driver, and finally adds the TI CSI2RX wrapper driver. Tested on TI's J721E with OV5640 sensor. Changes in v2: - Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before making calls to set PHY mode, etc. to make sure it is ready. - Add all 64 threads, instead of having only the one thread being currently used by the driver. - Use dmaengine_get_dma_device() instead of directly accessing dma->device->dev. - Do not set dst_addr_width when configuring slave DMA. - Move to a separate subdir and rename to j721e-csi2rx.c - Convert compatible to ti,j721e-csi2rx. - Move to use Media Controller centric APIs. - Improve cleanup in probe when one of the steps fails. - Add colorspace to formats database. - Set hw_revision on media_device. - Move video device initialization to probe time instead of register time. - Rename to ti,j721e-csi2rx.yaml - Add an entry in MAINTAINERS. - Add a description for the binding. - Change compatible to ti,j721e-csi2rx to make it SoC specific. - Remove description from dmas, reg, power-domains. - Remove a limit of 2 from #address-cells and #size-cells. - Fix add ^ to csi-bridge subnode regex. - Make ranges mandatory. - Add unit address in example. - Add a reference to cdns,csi2rx in csi-bridge subnode. - Expand the example to include the csi-bridge subnode as well. - Re-order subject prefixes. - Drop reg description. - Add a description for each DPHY clock. - Rename dphy@... to phy@... in example. - Add Laurent's R-by. - Re-order subject prefixes. - Re-order subject prefixes. - Add power-domain to the example. - Add Laurent's R-by. - Re-order subject prefixes. - Convert OV5640 to use runtime PM and drop Cadence CSI2RX s_power patch. - Drop subdev call wrappers from cdns-csi2rx. - Move VPE and CAL to a separate subdir. - Rename ti-csi2rx.c to j721e-csi2rx.c Paul Kocialkowski (1): phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Pratyush Yadav (17): phy: cdns-dphy: Prepare for Rx support phy: cdns-dphy: Allow setting mode phy: cdns-dphy: Add Rx support media: ov5640: Use runtime PM to control sensor power media: cadence: csi2rx: Add external DPHY support media: cadence: csi2rx: Soft reset the streams before starting capture media: cadence: csi2rx: Set the STOP bit when stopping a stream media: cadence: csi2rx: Fix stream data configuration media: cadence: csi2rx: Populate subdev devnode dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX media: Re-structure TI platform drivers media: ti: Add CSI2RX support for J721E media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver media: dt-bindings: Convert Cadence CSI2RX binding to YAML phy: dt-bindings: Convert Cadence DPHY binding to YAML phy: dt-bindings: cdns,dphy: make clocks optional phy: dt-bindings: cdns,dphy: add power-domains property .../devicetree/bindings/media/cdns,csi2rx.txt | 100 -- .../bindings/media/cdns,csi2rx.yaml | 164 ++++ .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++ .../devicetree/bindings/phy/cdns,dphy.txt | 20 - .../devicetree/bindings/phy/cdns,dphy.yaml | 54 ++ MAINTAINERS | 10 +- drivers/dma/ti/k3-psil-j721e.c | 73 ++ drivers/media/i2c/Kconfig | 2 +- drivers/media/i2c/ov5640.c | 124 ++- drivers/media/platform/Kconfig | 12 + drivers/media/platform/Makefile | 2 +- drivers/media/platform/cadence/cdns-csi2rx.c | 196 +++- drivers/media/platform/ti/Makefile | 4 + drivers/media/platform/ti/cal/Makefile | 3 + .../{ti-vpe => ti/cal}/cal-camerarx.c | 0 .../platform/{ti-vpe => ti/cal}/cal-video.c | 0 .../media/platform/{ti-vpe => ti/cal}/cal.c | 0 .../media/platform/{ti-vpe => ti/cal}/cal.h | 0 .../platform/{ti-vpe => ti/cal}/cal_regs.h | 0 .../media/platform/ti/j721e-csi2rx/Makefile | 2 + .../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 884 ++++++++++++++++++ .../platform/{ti-vpe => ti/vpe}/Makefile | 4 - .../media/platform/{ti-vpe => ti/vpe}/csc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/csc.h | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.h | 0 .../platform/{ti-vpe => ti/vpe}/sc_coeff.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.c | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.h | 0 .../platform/{ti-vpe => ti/vpe}/vpdma_priv.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpe.c | 0 .../platform/{ti-vpe => ti/vpe}/vpe_regs.h | 0 drivers/phy/cadence/cdns-dphy.c | 407 +++++++- include/linux/phy/phy-mipi-dphy.h | 13 + 34 files changed, 1950 insertions(+), 225 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml create mode 100644 drivers/media/platform/ti/Makefile create mode 100644 drivers/media/platform/ti/cal/Makefile rename drivers/media/platform/{ti-vpe => ti/cal}/cal-camerarx.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal-video.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal.h (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal_regs.h (100%) create mode 100644 drivers/media/platform/ti/j721e-csi2rx/Makefile create mode 100644 drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c rename drivers/media/platform/{ti-vpe => ti/vpe}/Makefile (78%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc_coeff.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma_priv.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe_regs.h (100%) -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Pratyush Yadav <p.yadav@ti.com> To: Maxime Ripard <mripard@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring <robh+dt@kernel.org>, Pratyush Yadav <p.yadav@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Peter Ujfalusi <peter.ujfalusi@gmail.com>, Steve Longerbeam <slongerbeam@gmail.com>, Benoit Parrot <bparrot@ti.com>, <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>, <dmaengine@vger.kernel.org> Cc: Vignesh Raghavendra <vigneshr@ti.com>, Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>, Chunfeng Yun <chunfeng.yun@mediatek.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Subject: [PATCH v2 00/18] CSI2RX support on J721E Date: Wed, 26 May 2021 20:52:50 +0530 [thread overview] Message-ID: <20210526152308.16525-1-p.yadav@ti.com> (raw) Hi, This series adds support for CSI2 capture on J721E. It includes some fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY driver, and finally adds the TI CSI2RX wrapper driver. Tested on TI's J721E with OV5640 sensor. Changes in v2: - Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before making calls to set PHY mode, etc. to make sure it is ready. - Add all 64 threads, instead of having only the one thread being currently used by the driver. - Use dmaengine_get_dma_device() instead of directly accessing dma->device->dev. - Do not set dst_addr_width when configuring slave DMA. - Move to a separate subdir and rename to j721e-csi2rx.c - Convert compatible to ti,j721e-csi2rx. - Move to use Media Controller centric APIs. - Improve cleanup in probe when one of the steps fails. - Add colorspace to formats database. - Set hw_revision on media_device. - Move video device initialization to probe time instead of register time. - Rename to ti,j721e-csi2rx.yaml - Add an entry in MAINTAINERS. - Add a description for the binding. - Change compatible to ti,j721e-csi2rx to make it SoC specific. - Remove description from dmas, reg, power-domains. - Remove a limit of 2 from #address-cells and #size-cells. - Fix add ^ to csi-bridge subnode regex. - Make ranges mandatory. - Add unit address in example. - Add a reference to cdns,csi2rx in csi-bridge subnode. - Expand the example to include the csi-bridge subnode as well. - Re-order subject prefixes. - Drop reg description. - Add a description for each DPHY clock. - Rename dphy@... to phy@... in example. - Add Laurent's R-by. - Re-order subject prefixes. - Re-order subject prefixes. - Add power-domain to the example. - Add Laurent's R-by. - Re-order subject prefixes. - Convert OV5640 to use runtime PM and drop Cadence CSI2RX s_power patch. - Drop subdev call wrappers from cdns-csi2rx. - Move VPE and CAL to a separate subdir. - Rename ti-csi2rx.c to j721e-csi2rx.c Paul Kocialkowski (1): phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Pratyush Yadav (17): phy: cdns-dphy: Prepare for Rx support phy: cdns-dphy: Allow setting mode phy: cdns-dphy: Add Rx support media: ov5640: Use runtime PM to control sensor power media: cadence: csi2rx: Add external DPHY support media: cadence: csi2rx: Soft reset the streams before starting capture media: cadence: csi2rx: Set the STOP bit when stopping a stream media: cadence: csi2rx: Fix stream data configuration media: cadence: csi2rx: Populate subdev devnode dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX media: Re-structure TI platform drivers media: ti: Add CSI2RX support for J721E media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver media: dt-bindings: Convert Cadence CSI2RX binding to YAML phy: dt-bindings: Convert Cadence DPHY binding to YAML phy: dt-bindings: cdns,dphy: make clocks optional phy: dt-bindings: cdns,dphy: add power-domains property .../devicetree/bindings/media/cdns,csi2rx.txt | 100 -- .../bindings/media/cdns,csi2rx.yaml | 164 ++++ .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++ .../devicetree/bindings/phy/cdns,dphy.txt | 20 - .../devicetree/bindings/phy/cdns,dphy.yaml | 54 ++ MAINTAINERS | 10 +- drivers/dma/ti/k3-psil-j721e.c | 73 ++ drivers/media/i2c/Kconfig | 2 +- drivers/media/i2c/ov5640.c | 124 ++- drivers/media/platform/Kconfig | 12 + drivers/media/platform/Makefile | 2 +- drivers/media/platform/cadence/cdns-csi2rx.c | 196 +++- drivers/media/platform/ti/Makefile | 4 + drivers/media/platform/ti/cal/Makefile | 3 + .../{ti-vpe => ti/cal}/cal-camerarx.c | 0 .../platform/{ti-vpe => ti/cal}/cal-video.c | 0 .../media/platform/{ti-vpe => ti/cal}/cal.c | 0 .../media/platform/{ti-vpe => ti/cal}/cal.h | 0 .../platform/{ti-vpe => ti/cal}/cal_regs.h | 0 .../media/platform/ti/j721e-csi2rx/Makefile | 2 + .../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 884 ++++++++++++++++++ .../platform/{ti-vpe => ti/vpe}/Makefile | 4 - .../media/platform/{ti-vpe => ti/vpe}/csc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/csc.h | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.h | 0 .../platform/{ti-vpe => ti/vpe}/sc_coeff.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.c | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.h | 0 .../platform/{ti-vpe => ti/vpe}/vpdma_priv.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpe.c | 0 .../platform/{ti-vpe => ti/vpe}/vpe_regs.h | 0 drivers/phy/cadence/cdns-dphy.c | 407 +++++++- include/linux/phy/phy-mipi-dphy.h | 13 + 34 files changed, 1950 insertions(+), 225 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml create mode 100644 drivers/media/platform/ti/Makefile create mode 100644 drivers/media/platform/ti/cal/Makefile rename drivers/media/platform/{ti-vpe => ti/cal}/cal-camerarx.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal-video.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal.h (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal_regs.h (100%) create mode 100644 drivers/media/platform/ti/j721e-csi2rx/Makefile create mode 100644 drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c rename drivers/media/platform/{ti-vpe => ti/vpe}/Makefile (78%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc_coeff.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma_priv.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe_regs.h (100%) -- 2.30.0 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2021-05-26 15:23 UTC|newest] Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-26 15:22 Pratyush Yadav [this message] 2021-05-26 15:22 ` [PATCH v2 00/18] CSI2RX support on J721E Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 01/18] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 02/18] phy: cdns-dphy: Prepare for Rx support Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 03/18] phy: cdns-dphy: Allow setting mode Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 04/18] phy: cdns-dphy: Add Rx support Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-28 6:09 ` Tomi Valkeinen 2021-05-28 6:09 ` Tomi Valkeinen 2021-05-26 15:22 ` [PATCH v2 05/18] media: ov5640: Use runtime PM to control sensor power Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-28 6:44 ` Tomi Valkeinen 2021-05-28 6:44 ` Tomi Valkeinen 2021-05-28 7:25 ` Pratyush Yadav 2021-05-28 7:25 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 06/18] media: cadence: csi2rx: Add external DPHY support Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-28 7:23 ` Tomi Valkeinen 2021-05-28 7:23 ` Tomi Valkeinen 2021-05-28 7:30 ` Pratyush Yadav 2021-05-28 7:30 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 07/18] media: cadence: csi2rx: Soft reset the streams before starting capture Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 08/18] media: cadence: csi2rx: Set the STOP bit when stopping a stream Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 09/18] media: cadence: csi2rx: Fix stream data configuration Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 10/18] media: cadence: csi2rx: Populate subdev devnode Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-28 7:16 ` Tomi Valkeinen 2021-05-28 7:16 ` Tomi Valkeinen 2021-05-28 7:24 ` Pratyush Yadav 2021-05-28 7:24 ` Pratyush Yadav 2021-05-28 7:35 ` Tomi Valkeinen 2021-05-28 7:35 ` Tomi Valkeinen 2021-06-03 12:42 ` Pratyush Yadav 2021-06-03 12:42 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 11/18] dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-31 6:51 ` Péter Ujfalusi 2021-05-31 6:51 ` Péter Ujfalusi 2021-05-31 9:16 ` Pratyush Yadav 2021-05-31 9:16 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 12/18] media: Re-structure TI platform drivers Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-28 8:29 ` Tomi Valkeinen 2021-05-28 8:29 ` Tomi Valkeinen 2021-05-26 15:23 ` [PATCH v2 13/18] media: ti: Add CSI2RX support for J721E Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-27 13:29 ` Tomi Valkeinen 2021-05-27 13:29 ` Tomi Valkeinen 2021-06-03 12:49 ` Pratyush Yadav 2021-06-03 12:49 ` Pratyush Yadav 2021-06-04 8:04 ` Tomi Valkeinen 2021-06-04 8:04 ` Tomi Valkeinen 2021-05-26 15:23 ` [PATCH v2 14/18] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-27 14:23 ` Rob Herring 2021-05-27 14:23 ` Rob Herring 2021-06-03 12:43 ` Pratyush Yadav 2021-06-03 12:43 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 15/18] media: dt-bindings: Convert Cadence CSI2RX binding to YAML Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-06-01 17:45 ` Rob Herring 2021-06-01 17:45 ` Rob Herring 2021-06-03 12:23 ` Pratyush Yadav 2021-06-03 12:23 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 16/18] phy: dt-bindings: Convert Cadence DPHY " Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-06-02 19:51 ` Rob Herring 2021-06-02 19:51 ` Rob Herring 2021-05-26 15:23 ` [PATCH v2 17/18] phy: dt-bindings: cdns,dphy: make clocks optional Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-06-02 13:27 ` Maxime Ripard 2021-06-02 13:27 ` Maxime Ripard 2021-06-03 8:16 ` Pratyush Yadav 2021-06-03 8:16 ` Pratyush Yadav 2021-06-02 20:03 ` Rob Herring 2021-06-02 20:03 ` Rob Herring 2021-05-26 15:23 ` [PATCH v2 18/18] phy: dt-bindings: cdns,dphy: add power-domains property Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 18/18] phy: dt-bindings: cdns, dphy: " Pratyush Yadav 2021-06-02 20:03 ` [PATCH v2 18/18] phy: dt-bindings: cdns,dphy: " Rob Herring 2021-06-02 20:03 ` Rob Herring 2021-05-27 12:42 ` [PATCH v2 00/18] CSI2RX support on J721E Tomi Valkeinen 2021-05-27 12:42 ` Tomi Valkeinen 2021-06-03 12:54 ` Pratyush Yadav 2021-06-03 12:54 ` Pratyush Yadav 2021-05-27 13:23 ` Tomi Valkeinen 2021-05-27 13:23 ` Tomi Valkeinen 2021-06-03 12:52 ` Pratyush Yadav 2021-06-03 12:52 ` Pratyush Yadav 2021-06-04 7:54 ` Tomi Valkeinen 2021-06-04 7:54 ` Tomi Valkeinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210526152308.16525-1-p.yadav@ti.com \ --to=p.yadav@ti.com \ --cc=bparrot@ti.com \ --cc=chunfeng.yun@mediatek.com \ --cc=devicetree@vger.kernel.org \ --cc=dmaengine@vger.kernel.org \ --cc=kishon@ti.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=mchehab@kernel.org \ --cc=mripard@kernel.org \ --cc=peter.ujfalusi@gmail.com \ --cc=robh+dt@kernel.org \ --cc=slongerbeam@gmail.com \ --cc=tomi.valkeinen@ideasonboard.com \ --cc=vigneshr@ti.com \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.