From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/2] mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messages
Date: Fri, 28 May 2021 14:21:26 +0300 [thread overview]
Message-ID: <20210528112127.71738-1-andriy.shevchenko@linux.intel.com> (raw)
dev_dbg() in any case prints the device and driver name, no need
to repeat this in (some) messages. Drop duplicates for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mmc/host/mmc_spi.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 9776a03a10f5..65c65bb5737f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -504,7 +504,7 @@ mmc_spi_command_send(struct mmc_spi_host *host,
/* else: R1 (most commands) */
}
- dev_dbg(&host->spi->dev, " mmc_spi: CMD%d, resp %s\n",
+ dev_dbg(&host->spi->dev, " CMD%d, resp %s\n",
cmd->opcode, maptype(cmd));
/* send command, leaving chipselect active */
@@ -928,8 +928,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
while (length) {
t->len = min(length, blk_size);
- dev_dbg(&host->spi->dev,
- " mmc_spi: %s block, %d bytes\n",
+ dev_dbg(&host->spi->dev, " %s block, %d bytes\n",
(direction == DMA_TO_DEVICE) ? "write" : "read",
t->len);
@@ -974,7 +973,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
int tmp;
const unsigned statlen = sizeof(scratch->status);
- dev_dbg(&spi->dev, " mmc_spi: STOP_TRAN\n");
+ dev_dbg(&spi->dev, " STOP_TRAN\n");
/* Tweak the per-block message we set up earlier by morphing
* it to hold single buffer with the token followed by some
@@ -1175,7 +1174,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
canpower = host->pdata && host->pdata->setpower;
- dev_dbg(&host->spi->dev, "mmc_spi: power %s (%d)%s\n",
+ dev_dbg(&host->spi->dev, "power %s (%d)%s\n",
mmc_powerstring(ios->power_mode),
ios->vdd,
canpower ? ", can switch" : "");
@@ -1248,8 +1247,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->spi->max_speed_hz = ios->clock;
status = spi_setup(host->spi);
- dev_dbg(&host->spi->dev,
- "mmc_spi: clock to %d Hz, %d\n",
+ dev_dbg(&host->spi->dev, " clock to %d Hz, %d\n",
host->spi->max_speed_hz, status);
}
}
--
2.30.2
next reply other threads:[~2021-05-28 11:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-28 11:21 Andy Shevchenko [this message]
2021-05-28 11:21 ` [PATCH v1 2/2] mmc: mmc_spi: Imply container_of() to be no-op Andy Shevchenko
2021-05-31 10:16 ` Ulf Hansson
2021-05-31 10:16 ` [PATCH v1 1/2] mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messages Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210528112127.71738-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.