From: Fabio Estevam <festevam@gmail.com>
To: hverkuil-cisco@xs4all.nl
Cc: lars@metafoo.de, robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org, tharvey@gateworks.com,
frieder.schrempf@kontron.de, niklas.soderlund@ragnatech.se,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v2 2/3] media: adv7180: Add optional reset GPIO
Date: Mon, 31 May 2021 08:22:36 -0300 [thread overview]
Message-ID: <20210531112237.706063-2-festevam@gmail.com> (raw)
In-Reply-To: <20210531112237.706063-1-festevam@gmail.com>
From: Frieder Schrempf <frieder.schrempf@kontron.de>
There is a reset input that can be controlled by GPIO. Let's add it
to let the driver control it if required.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Used Frieder's version of the patch.
drivers/media/i2c/adv7180.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 44bb6fe85644..2890041cc231 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -205,6 +205,7 @@ struct adv7180_state {
struct mutex mutex; /* mutual excl. when accessing chip */
int irq;
struct gpio_desc *pwdn_gpio;
+ struct gpio_desc *rst_gpio;
v4l2_std_id curr_norm;
bool powered;
bool streaming;
@@ -484,6 +485,19 @@ static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
}
}
+static void adv7180_set_reset_pin(struct adv7180_state *state, bool on)
+{
+ if (!state->rst_gpio)
+ return;
+
+ if (on) {
+ gpiod_set_value_cansleep(state->rst_gpio, 1);
+ } else {
+ gpiod_set_value_cansleep(state->rst_gpio, 0);
+ usleep_range(5000, 10000);
+ }
+}
+
static int adv7180_set_power(struct adv7180_state *state, bool on)
{
u8 val;
@@ -1263,6 +1277,7 @@ static int init_device(struct adv7180_state *state)
mutex_lock(&state->mutex);
adv7180_set_power_pin(state, true);
+ adv7180_set_reset_pin(state, false);
adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
usleep_range(5000, 10000);
@@ -1338,6 +1353,14 @@ static int adv7180_probe(struct i2c_client *client,
return ret;
}
+ state->rst_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(state->rst_gpio)) {
+ ret = PTR_ERR(state->rst_gpio);
+ v4l_err(client, "request for reset pin failed: %d\n", ret);
+ return ret;
+ }
+
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
state->csi_client = i2c_new_dummy_device(client->adapter,
ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1428,6 +1451,7 @@ static int adv7180_remove(struct i2c_client *client)
i2c_unregister_device(state->vpp_client);
i2c_unregister_device(state->csi_client);
+ adv7180_set_reset_pin(state, true);
adv7180_set_power_pin(state, false);
mutex_destroy(&state->mutex);
--
2.25.1
next prev parent reply other threads:[~2021-05-31 11:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 11:22 [PATCH v2 1/3] dt-bindings: adv7180: Introduce the 'reset-gpios' property Fabio Estevam
2021-05-31 11:22 ` Fabio Estevam [this message]
2021-05-31 11:22 ` [PATCH v2 3/3] media: i2c: adv7180: Print the chip ID on probe Fabio Estevam
2021-06-04 21:33 ` [PATCH v2 1/3] dt-bindings: adv7180: Introduce the 'reset-gpios' property Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210531112237.706063-2-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=frieder.schrempf@kontron.de \
--cc=hverkuil-cisco@xs4all.nl \
--cc=lars@metafoo.de \
--cc=linux-media@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.