All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr>
To: lee.jones@linaro.org, linux-kernel@vger.kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	linux-gpio@vger.kernel.org, p.zabel@pengutronix.de,
	robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: luka.perkov@sartura.hr, jmp@epiphyte.org, pmenzel@molgen.mpg.de,
	buczek@molgen.mpg.de, Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH v3 4/6] reset: Add Delta TN48M CPLD reset controller
Date: Mon, 31 May 2021 14:51:41 +0200	[thread overview]
Message-ID: <20210531125143.257622-4-robert.marko@sartura.hr> (raw)
In-Reply-To: <20210531125143.257622-1-robert.marko@sartura.hr>

Delta TN48M CPLD exposes resets for the following:
* 88F7040 SoC
* 88F6820 SoC
* 98DX3265 switch MAC-s
* 88E1680 PHY-s
* 88E1512 PHY
* PoE PSE controller

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 drivers/reset/Kconfig       |   9 +++
 drivers/reset/Makefile      |   1 +
 drivers/reset/reset-tn48m.c | 128 ++++++++++++++++++++++++++++++++++++
 3 files changed, 138 insertions(+)
 create mode 100644 drivers/reset/reset-tn48m.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 4171c6f76385..e3ff4b020c96 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -64,6 +64,15 @@ config RESET_BRCMSTB_RESCAL
 	  This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
 	  BCM7216.
 
+config RESET_TN48M_CPLD
+	tristate "Delta Networks TN48M switch CPLD reset controller"
+	depends on MFD_TN48M_CPLD
+	help
+	  This enables the reset controller driver for the Delta TN48M CPLD.
+	  It provides reset signals for Armada 7040 and 385 SoC-s, Alleycat 3X
+	  switch MAC-s, Alaska OOB ethernet PHY, Quad Alaska ethernet PHY-s and
+	  Microchip PD69200 PoE PSE controller.
+
 config RESET_HSDK
 	bool "Synopsys HSDK Reset Driver"
 	depends on HAS_IOMEM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 65a118a91b27..6d6945638b76 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
 obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o
 obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
+obj-$(CONFIG_RESET_TN48M_CPLD) += reset-tn48m.o
 obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
diff --git a/drivers/reset/reset-tn48m.c b/drivers/reset/reset-tn48m.c
new file mode 100644
index 000000000000..960ee5f4eb40
--- /dev/null
+++ b/drivers/reset/reset-tn48m.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Delta TN48M CPLD reset driver
+ *
+ * Copyright 2021 Sartura Ltd
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/delta,tn48m-reset.h>
+
+#define TN48M_RESET_REG		0x10
+
+struct tn48_reset_map {
+	u8 bit;
+};
+
+struct tn48_reset_data {
+	struct reset_controller_dev rcdev;
+	struct regmap *regmap;
+};
+
+static const struct tn48_reset_map tn48m_resets[] = {
+	[CPU_88F7040_RESET] = {0},
+	[CPU_88F6820_RESET] = {1},
+	[MAC_98DX3265_RESET] = {2},
+	[PHY_88E1680_RESET] = {4},
+	[PHY_88E1512_RESET] = {6},
+	[POE_RESET] = {7},
+};
+
+static inline struct tn48_reset_data *to_tn48_reset_data(
+			struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct tn48_reset_data, rcdev);
+}
+
+static int tn48m_control_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct tn48_reset_data *data = to_tn48_reset_data(rcdev);
+
+	return regmap_update_bits(data->regmap, TN48M_RESET_REG,
+				  BIT(tn48m_resets[id].bit), 0);
+}
+
+static int tn48m_control_reset(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return tn48m_control_assert(rcdev, id);
+}
+
+static int tn48m_control_status(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct tn48_reset_data *data = to_tn48_reset_data(rcdev);
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, TN48M_RESET_REG, &regval);
+	if (ret < 0)
+		return ret;
+
+	if (BIT(tn48m_resets[id].bit) & regval)
+		return 0;
+	else
+		return 1;
+}
+
+static const struct reset_control_ops tn48_reset_ops = {
+	.reset		= tn48m_control_reset,
+	.assert		= tn48m_control_assert,
+	.status		= tn48m_control_status,
+};
+
+static int tn48m_reset_probe(struct platform_device *pdev)
+{
+	struct tn48_reset_data *data;
+	struct regmap *regmap;
+
+	if (!pdev->dev.parent)
+		return -ENODEV;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = regmap;
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.ops = &tn48_reset_ops;
+	data->rcdev.nr_resets = ARRAY_SIZE(tn48m_resets);
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+
+static const struct of_device_id tn48m_reset_of_match[] = {
+	{ .compatible = "delta,tn48m-reset", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tn48m_reset_of_match);
+
+static struct platform_driver tn48m_reset_driver = {
+	.driver = {
+		.name = "delta-tn48m-reset",
+		.of_match_table = tn48m_reset_of_match,
+	},
+	.probe = tn48m_reset_probe,
+};
+module_platform_driver(tn48m_reset_driver);
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("Delta TN48M CPLD reset driver");
+MODULE_LICENSE("GPL");
-- 
2.31.1


  parent reply	other threads:[~2021-05-31 12:52 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-31 12:51 [PATCH v3 1/6] mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Robert Marko
2021-05-31 12:51 ` [PATCH v3 2/6] gpio: Add Delta TN48M CPLD GPIO driver Robert Marko
2021-05-31 12:51 ` [PATCH v3 3/6] dt-bindings: reset: Add Delta TN48M Robert Marko
2021-05-31 12:51 ` Robert Marko [this message]
2021-06-01 15:38   ` [PATCH v3 4/6] reset: Add Delta TN48M CPLD reset controller Philipp Zabel
2021-06-01 17:09     ` Robert Marko
2021-06-02  8:47       ` Philipp Zabel
2021-06-02 11:48         ` Robert Marko
2021-05-31 12:51 ` [PATCH v3 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Robert Marko
2021-06-02 10:47   ` Lee Jones
2021-06-02 10:54     ` Robert Marko
2021-05-31 12:51 ` [PATCH v3 6/6] MAINTAINERS: Add Delta Networks TN48M CPLD drivers Robert Marko
2021-06-01  8:39 ` [PATCH v3 1/6] mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Lee Jones
2021-06-01  9:12   ` Robert Marko
2021-06-02 10:49 ` Lee Jones
2021-06-02 11:53   ` Robert Marko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210531125143.257622-4-robert.marko@sartura.hr \
    --to=robert.marko@sartura.hr \
    --cc=bgolaszewski@baylibre.com \
    --cc=buczek@molgen.mpg.de \
    --cc=devicetree@vger.kernel.org \
    --cc=jmp@epiphyte.org \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luka.perkov@sartura.hr \
    --cc=p.zabel@pengutronix.de \
    --cc=pmenzel@molgen.mpg.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.