From: Sergey Matyukevich <geomatsi@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH/RFC 00/28] sunxi: switch to mainline ATF
Date: Tue, 1 Jun 2021 00:27:20 +0300 [thread overview]
Message-ID: <20210531212748.2378872-1-geomatsi@gmail.com> (raw)
Hi all,
This patch set updates BSP on H5/A64 sunxi boards. For each board
the following changes are implemented:
- switch from early Allwinner ATF port to mainline ATF
- bump Linux kernel and U-Boot versions
Note that I have only orangepi-zero-plus2 board at my disposal. So only
this board has been tested. For all the other boards only build tests
have been completed. Any help with boot tests on other H5/A64 sunxi
boards is more than welcome.
Regards,
Sergey
Sergey Matyukevich (28):
boot/arm-trusted-firmware: option to disable stack protection
support/testing: switch TestATFAllwinner to upstream ATF
support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinner
configs/orangepi_zero_plus2_defconfig: switch to upstream ATF
configs/bananapi_m64_defconfig: switch to upstream ATF
configs/orangepi_zero_plus_defconfig: switch to upstream ATF
configs/orangepi_pc2_defconfig: switch to upstream ATF
configs/orangepi_prime_defconfig: switch to upstream ATF
configs/orangepi_win_defconfig: switch to upstream ATF
configs/friendlyarm_nanopi_a64_defconfig: switch to upstream ATF
configs/friendlyarm_nanopi_neo2_defconfig: switch to upstream ATF
configs/friendlyarm_nanopi_neo_plus2_defconfig: switch to upstream ATF
configs/amarula_a64_relic_defconfig: switch to upstream ATF
configs/olimex_a64_olinuxino_defconfig: switch to mainline ATF
configs/pine64_defconfig: switch to mainline ATF
configs/pine64_sopine_defconfig: switch to upstream ATF
configs/orangepi-zero-plus2: bump BSP versions
configs/bananapi_m64_defconfig: bump BSP versions
configs/orangepi_zero_plus_defconfig: bump BSP versions
configs/orangepi_pc2_defconfig: bump BSP versions
configs/orangepi_prime_defconfig: bump BSP versions
configs/orangepi_win_defconfig: bump BSP versions
configs/friendlyarm_nanopi_a64_defconfig: bump BSP versions
configs/friendlyarm_nanopi_neo2_defconfig: bump BSP versions
configs/friendlyarm_nanopi_neo_plus2_defconfig: bump BSP versions
configs/olimex_a64_olinuxino_defconfig: bump BSP versions
configs/pine64_defconfig: bump BSP versions
configs/pine64_sopine_defconfig: bump BSP versions
board/bananapi/bananapi-m64/genimage.cfg | 10 ++------
board/friendlyarm/nanopi-a64/genimage.cfg | 10 ++------
.../friendlyarm/nanopi-neo-plus2/genimage.cfg | 10 ++------
board/friendlyarm/nanopi-neo2/genimage.cfg | 10 ++------
board/olimex/a64-olinuxino/genimage.cfg | 10 ++------
board/orangepi/orangepi-pc2/genimage.cfg | 10 ++------
board/orangepi/orangepi-prime/genimage.cfg | 10 ++------
board/orangepi/orangepi-win/genimage.cfg | 10 ++------
.../orangepi/orangepi-zero-plus/genimage.cfg | 10 ++------
.../orangepi/orangepi-zero-plus2/genimage.cfg | 10 ++------
board/pine64/pine64/genimage.cfg | 10 ++------
board/pine64/sopine/genimage.cfg | 10 ++------
boot/arm-trusted-firmware/Config.in | 7 ++++++
.../arm-trusted-firmware.mk | 4 ++++
configs/amarula_a64_relic_defconfig | 8 +++----
configs/bananapi_m64_defconfig | 21 ++++++++---------
configs/friendlyarm_nanopi_a64_defconfig | 21 ++++++++---------
configs/friendlyarm_nanopi_neo2_defconfig | 21 ++++++++---------
.../friendlyarm_nanopi_neo_plus2_defconfig | 20 ++++++++--------
configs/olimex_a64_olinuxino_defconfig | 21 ++++++++---------
configs/orangepi_pc2_defconfig | 21 ++++++++---------
configs/orangepi_prime_defconfig | 21 ++++++++---------
configs/orangepi_win_defconfig | 23 ++++++++++---------
configs/orangepi_zero_plus2_defconfig | 19 ++++++++-------
configs/orangepi_zero_plus_defconfig | 19 ++++++++-------
configs/pine64_defconfig | 22 +++++++++---------
configs/pine64_sopine_defconfig | 21 ++++++++---------
support/testing/tests/boot/test_atf.py | 16 ++++++-------
28 files changed, 168 insertions(+), 237 deletions(-)
--
2.31.1
next reply other threads:[~2021-05-31 21:27 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 21:27 Sergey Matyukevich [this message]
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 01/28] boot/arm-trusted-firmware: option to disable stack protection Sergey Matyukevich
2021-06-07 14:09 ` Heiko Thiery
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 02/28] support/testing: switch TestATFAllwinner to upstream ATF Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 03/28] support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinner Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 04/28] configs/orangepi_zero_plus2_defconfig: switch to upstream ATF Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 05/28] configs/bananapi_m64_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 06/28] configs/orangepi_zero_plus_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 07/28] configs/orangepi_pc2_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 08/28] configs/orangepi_prime_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 09/28] configs/orangepi_win_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 10/28] configs/friendlyarm_nanopi_a64_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 11/28] configs/friendlyarm_nanopi_neo2_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 12/28] configs/friendlyarm_nanopi_neo_plus2_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 13/28] configs/amarula_a64_relic_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 14/28] configs/olimex_a64_olinuxino_defconfig: switch to mainline ATF Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 15/28] configs/pine64_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 16/28] configs/pine64_sopine_defconfig: switch to upstream ATF Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 17/28] configs/orangepi-zero-plus2: bump BSP versions Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 18/28] configs/bananapi_m64_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 19/28] configs/orangepi_zero_plus_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 20/28] configs/orangepi_pc2_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 21/28] configs/orangepi_prime_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 22/28] configs/orangepi_win_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 23/28] configs/friendlyarm_nanopi_a64_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 24/28] configs/friendlyarm_nanopi_neo2_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 25/28] configs/friendlyarm_nanopi_neo_plus2_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 26/28] configs/olimex_a64_olinuxino_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 27/28] configs/pine64_defconfig: " Sergey Matyukevich
2021-05-31 21:27 ` [Buildroot] [PATCH/RFC 28/28] configs/pine64_sopine_defconfig: " Sergey Matyukevich
2021-06-02 9:46 ` [Buildroot] [PATCH/RFC 00/28] sunxi: switch to mainline ATF Heiko Thiery
2021-06-02 16:19 ` Sergey Matyukevich
2021-06-05 19:44 ` Yann E. MORIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210531212748.2378872-1-geomatsi@gmail.com \
--to=geomatsi@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.