From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergey Matyukevich Date: Tue, 1 Jun 2021 00:27:47 +0300 Subject: [Buildroot] [PATCH/RFC 27/28] configs/pine64_defconfig: bump BSP versions In-Reply-To: <20210531212748.2378872-1-geomatsi@gmail.com> References: <20210531212748.2378872-1-geomatsi@gmail.com> Message-ID: <20210531212748.2378872-28-geomatsi@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04 requires the following two changes. First, after switching to binman, u-boot.itb is no more generated for 64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should be used instead. This image contains SPL, U-Boot, and FIT image, where FIT image contains other binaries such as BL31 and SCP. Second, new U-Boot enables support for System Control Processor (SCP) firmware. SCP firmware is included by default into FIT image in the combined u-boot-sunxi-with-spl.bin binary. When SCP is not available or not needed, it should be explicitly disabled by pointing to an empty file. Support for Allwinner SCP firmware is not yet available neither in Buildroot nor in mainline kernel. So disable it for now using custom U-Boot build options. Signed-off-by: Sergey Matyukevich --- board/pine64/pine64/genimage.cfg | 10 ++-------- configs/pine64_defconfig | 14 +++++++------- 2 files changed, 9 insertions(+), 15 deletions(-) diff --git a/board/pine64/pine64/genimage.cfg b/board/pine64/pine64/genimage.cfg index 2ff38d5415..f1f276a877 100644 --- a/board/pine64/pine64/genimage.cfg +++ b/board/pine64/pine64/genimage.cfg @@ -15,15 +15,9 @@ image sdcard.img { partition spl { in-partition-table = "no" - image = "sunxi-spl.bin" + image = "u-boot-sunxi-with-spl.bin" offset = 8192 - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot.itb" - offset = 40K - size = 1M # 1MB - 40K + size = 1040384 # 1MB - 8KB } partition boot { diff --git a/configs/pine64_defconfig b/configs/pine64_defconfig index 981360b934..5b85d37087 100644 --- a/configs/pine64_defconfig +++ b/configs/pine64_defconfig @@ -2,8 +2,8 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 5.0 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y +# Linux headers same as kernel, a 5.12 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y @@ -17,15 +17,15 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pine64_plus" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/pine64/pine64/boot.cmd" @@ -33,7 +33,7 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/pine64/pine64/boot.cmd" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.2" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-pine64" -- 2.31.1