All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 0/3] extcon: sm5502: Add support for SM5504
@ 2021-06-03  8:52 ` Stephan Gerhold
  2021-06-03  8:52   ` [PATCH v4 1/3] dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic Stephan Gerhold
                     ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Stephan Gerhold @ 2021-06-03  8:52 UTC (permalink / raw)
  To: Chanwoo Choi, MyungJoo Ham
  Cc: Rob Herring, devicetree, linux-kernel, Nikita Travkin,
	~postmarketos/upstreaming, Stephan Gerhold

This patch series adds support for SM5504 to the existing extcon-sm5502
driver. SM5502 and SM5504 are fairly similar so support for SM5504 can
be added with a few simple changes to the code.

I tested this patch series on both SM5502 (Samsung Galaxy A5 2015)
and SM5504 (Samsung Galaxy S4 Mini Value Edition) and it seems to work
just fine for both.

---
Changes in v4:
  - Add NULL check for .parse_irq (suggested by Chanwoo Choi)
  - Add Rob's Acked-by: on the dt-bindings patch
Changes in v3:
  - Drop patch 1-4 (already applied)
  - Avoid if (type == TYPE_SM5504) everywhere in the code, instead
    introduce a struct sm5502_type that encodes chip-specific information.
Changes in v2: Fix compile warning in last patch

v3: https://lore.kernel.org/lkml/20210601200007.218802-1-stephan@gerhold.net/
v2: https://lore.kernel.org/lkml/20210531133438.3511-1-stephan@gerhold.net/
v1: https://lore.kernel.org/lkml/20210520112334.129556-1-stephan@gerhold.net/

Stephan Gerhold (3):
  dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic
  extcon: sm5502: Refactor driver to use chip-specific struct
  extcon: sm5502: Add support for SM5504

 .../extcon/siliconmitus,sm5502-muic.yaml      |   6 +-
 drivers/extcon/Kconfig                        |   2 +-
 drivers/extcon/extcon-sm5502.c                | 200 +++++++++++++++---
 drivers/extcon/extcon-sm5502.h                |  82 ++++++-
 4 files changed, 252 insertions(+), 38 deletions(-)

-- 
2.31.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v4 1/3] dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic
  2021-06-03  8:52 ` [PATCH v4 0/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
@ 2021-06-03  8:52   ` Stephan Gerhold
  2021-06-03  8:52   ` [PATCH v4 2/3] extcon: sm5502: Refactor driver to use chip-specific struct Stephan Gerhold
                     ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Stephan Gerhold @ 2021-06-03  8:52 UTC (permalink / raw)
  To: Chanwoo Choi, MyungJoo Ham
  Cc: Rob Herring, devicetree, linux-kernel, Nikita Travkin,
	~postmarketos/upstreaming, Stephan Gerhold, Rob Herring

Document support for SM5504 with the new siliconmitus,sm5504-muic
compatible.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: Added Rob's Acked-by
---
 .../bindings/extcon/siliconmitus,sm5502-muic.yaml           | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
index 0432b0502e0b..fd2e55088888 100644
--- a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SM5502 MUIC (Micro-USB Interface Controller) device
+title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
@@ -19,10 +19,12 @@ properties:
   compatible:
     enum:
       - siliconmitus,sm5502-muic
+      - siliconmitus,sm5504-muic
 
   reg:
     maxItems: 1
-    description: I2C slave address of the device. Usually 0x25 for SM5502.
+    description: I2C slave address of the device. Usually 0x25 for SM5502,
+      0x14 for SM5504.
 
   interrupts:
     maxItems: 1
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v4 2/3] extcon: sm5502: Refactor driver to use chip-specific struct
  2021-06-03  8:52 ` [PATCH v4 0/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
  2021-06-03  8:52   ` [PATCH v4 1/3] dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic Stephan Gerhold
@ 2021-06-03  8:52   ` Stephan Gerhold
  2021-06-03  8:52   ` [PATCH v4 3/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
  2021-06-04  2:03   ` [PATCH v4 0/3] " Chanwoo Choi
  3 siblings, 0 replies; 5+ messages in thread
From: Stephan Gerhold @ 2021-06-03  8:52 UTC (permalink / raw)
  To: Chanwoo Choi, MyungJoo Ham
  Cc: Rob Herring, devicetree, linux-kernel, Nikita Travkin,
	~postmarketos/upstreaming, Stephan Gerhold

Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing
enum sm5504_types with a struct sm5504_type that stores the chip-specific
definitions. This struct can then be defined separately for SM5504
without having to add if (type == TYPE_SM5504) everywhere in the code.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Changes in v4: Add NULL check for .parse_irq
               (suggested by Chanwoo Choi)
Changes in v3: New patch to simplify diff on next patch
---
 drivers/extcon/extcon-sm5502.c | 68 ++++++++++++++++++++++------------
 drivers/extcon/extcon-sm5502.h |  4 --
 2 files changed, 44 insertions(+), 28 deletions(-)

diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 9f40bb9f1f81..60e2d12e81a2 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -40,17 +40,13 @@ struct sm5502_muic_info {
 	struct i2c_client *i2c;
 	struct regmap *regmap;
 
+	const struct sm5502_type *type;
 	struct regmap_irq_chip_data *irq_data;
-	struct muic_irq *muic_irqs;
-	unsigned int num_muic_irqs;
 	int irq;
 	bool irq_attach;
 	bool irq_detach;
 	struct work_struct irq_work;
 
-	struct reg_data *reg_data;
-	unsigned int num_reg_data;
-
 	struct mutex mutex;
 
 	/*
@@ -62,6 +58,17 @@ struct sm5502_muic_info {
 	struct delayed_work wq_detcable;
 };
 
+struct sm5502_type {
+	struct muic_irq *muic_irqs;
+	unsigned int num_muic_irqs;
+	const struct regmap_irq_chip *irq_chip;
+
+	struct reg_data *reg_data;
+	unsigned int num_reg_data;
+
+	int (*parse_irq)(struct sm5502_muic_info *info, int irq_type);
+};
+
 /* Default value of SM5502 register to bring up MUIC device. */
 static struct reg_data sm5502_reg_data[] = {
 	{
@@ -502,11 +509,11 @@ static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
 	struct sm5502_muic_info *info = data;
 	int i, irq_type = -1, ret;
 
-	for (i = 0; i < info->num_muic_irqs; i++)
-		if (irq == info->muic_irqs[i].virq)
-			irq_type = info->muic_irqs[i].irq;
+	for (i = 0; i < info->type->num_muic_irqs; i++)
+		if (irq == info->type->muic_irqs[i].virq)
+			irq_type = info->type->muic_irqs[i].irq;
 
-	ret = sm5502_parse_irq(info, irq_type);
+	ret = info->type->parse_irq(info, irq_type);
 	if (ret < 0) {
 		dev_warn(info->dev, "cannot handle is interrupt:%d\n",
 				    irq_type);
@@ -551,14 +558,14 @@ static void sm5502_init_dev_type(struct sm5502_muic_info *info)
 			    version_id, vendor_id);
 
 	/* Initiazle the register of SM5502 device to bring-up */
-	for (i = 0; i < info->num_reg_data; i++) {
+	for (i = 0; i < info->type->num_reg_data; i++) {
 		unsigned int val = 0;
 
-		if (!info->reg_data[i].invert)
-			val |= ~info->reg_data[i].val;
+		if (!info->type->reg_data[i].invert)
+			val |= ~info->type->reg_data[i].val;
 		else
-			val = info->reg_data[i].val;
-		regmap_write(info->regmap, info->reg_data[i].reg, val);
+			val = info->type->reg_data[i].val;
+		regmap_write(info->regmap, info->type->reg_data[i].reg, val);
 	}
 }
 
@@ -579,10 +586,13 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 	info->dev = &i2c->dev;
 	info->i2c = i2c;
 	info->irq = i2c->irq;
-	info->muic_irqs = sm5502_muic_irqs;
-	info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
-	info->reg_data = sm5502_reg_data;
-	info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+	info->type = device_get_match_data(info->dev);
+	if (!info->type)
+		return -EINVAL;
+	if (!info->type->parse_irq) {
+		dev_err(info->dev, "parse_irq missing in struct sm5502_type\n");
+		return -EINVAL;
+	}
 
 	mutex_init(&info->mutex);
 
@@ -598,16 +608,17 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 
 	/* Support irq domain for SM5502 MUIC device */
 	irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
-	ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq, irq_flags,
-				       0, &sm5502_muic_irq_chip, &info->irq_data);
+	ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq,
+				       irq_flags, 0, info->type->irq_chip,
+				       &info->irq_data);
 	if (ret != 0) {
 		dev_err(info->dev, "failed to request IRQ %d: %d\n",
 				    info->irq, ret);
 		return ret;
 	}
 
-	for (i = 0; i < info->num_muic_irqs; i++) {
-		struct muic_irq *muic_irq = &info->muic_irqs[i];
+	for (i = 0; i < info->type->num_muic_irqs; i++) {
+		struct muic_irq *muic_irq = &info->type->muic_irqs[i];
 		int virq = 0;
 
 		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
@@ -659,8 +670,17 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 	return 0;
 }
 
+static const struct sm5502_type sm5502_data = {
+	.muic_irqs = sm5502_muic_irqs,
+	.num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs),
+	.irq_chip = &sm5502_muic_irq_chip,
+	.reg_data = sm5502_reg_data,
+	.num_reg_data = ARRAY_SIZE(sm5502_reg_data),
+	.parse_irq = sm5502_parse_irq,
+};
+
 static const struct of_device_id sm5502_dt_match[] = {
-	{ .compatible = "siliconmitus,sm5502-muic" },
+	{ .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sm5502_dt_match);
@@ -691,7 +711,7 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
 			 sm5502_muic_suspend, sm5502_muic_resume);
 
 static const struct i2c_device_id sm5502_i2c_id[] = {
-	{ "sm5502", TYPE_SM5502 },
+	{ "sm5502", (kernel_ulong_t)&sm5502_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
diff --git a/drivers/extcon/extcon-sm5502.h b/drivers/extcon/extcon-sm5502.h
index ce1f1ec310c4..d187205df7b3 100644
--- a/drivers/extcon/extcon-sm5502.h
+++ b/drivers/extcon/extcon-sm5502.h
@@ -8,10 +8,6 @@
 #ifndef __LINUX_EXTCON_SM5502_H
 #define __LINUX_EXTCON_SM5502_H
 
-enum sm5502_types {
-	TYPE_SM5502,
-};
-
 /* SM5502 registers */
 enum sm5502_reg {
 	SM5502_REG_DEVICE_ID = 0x01,
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v4 3/3] extcon: sm5502: Add support for SM5504
  2021-06-03  8:52 ` [PATCH v4 0/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
  2021-06-03  8:52   ` [PATCH v4 1/3] dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic Stephan Gerhold
  2021-06-03  8:52   ` [PATCH v4 2/3] extcon: sm5502: Refactor driver to use chip-specific struct Stephan Gerhold
@ 2021-06-03  8:52   ` Stephan Gerhold
  2021-06-04  2:03   ` [PATCH v4 0/3] " Chanwoo Choi
  3 siblings, 0 replies; 5+ messages in thread
From: Stephan Gerhold @ 2021-06-03  8:52 UTC (permalink / raw)
  To: Chanwoo Choi, MyungJoo Ham
  Cc: Rob Herring, devicetree, linux-kernel, Nikita Travkin,
	~postmarketos/upstreaming, Stephan Gerhold

SM5504 is another MUIC from Silicon Mitus that is fairly similar
to SM5502. They seem to use the same register set, but:

  - SM5504 has some additional bits in SM5502_REG_CONTROL
  - SM5504 has a quite different set of interrupts
  - SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7)

Overall it's minor and we can support this by defining a separate
struct sm5502_type for SM5504.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Changes in v4: None.
Changes in v3: Avoid if statements, use struct sm5502_type indirection
Changes in v2: Fix warning: cast to smaller integer type 'enum sm5502_types'
               from 'const void *' [-Wvoid-pointer-to-enum-cast]
               reported by kernel test robot

Interestingly enough the register set (and especially the interrupts)
also look *very* similar to Richtek RT8973A (extcon-rt8973a) but
I didn't investigate this further.

Note that the changes in this patch are mostly based on guesswork
based on a SM5504 driver from Nitin Chaudhary [1] used in some Samsung
vendor kernels, since I was not able to find a public datasheet for SM5504.

[1]: https://github.com/NitinChaudharyUSC/MSM8x16_8x26/blob/master/drivers/misc/sm5504.c
---
 drivers/extcon/Kconfig         |   2 +-
 drivers/extcon/extcon-sm5502.c | 132 +++++++++++++++++++++++++++++++--
 drivers/extcon/extcon-sm5502.h |  78 +++++++++++++++++++
 3 files changed, 204 insertions(+), 8 deletions(-)

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index e3db936becfd..c69d40ae5619 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -154,7 +154,7 @@ config EXTCON_RT8973A
 	  from abnormal high input voltage (up to 28V).
 
 config EXTCON_SM5502
-	tristate "Silicon Mitus SM5502 EXTCON support"
+	tristate "Silicon Mitus SM5502/SM5504 EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 60e2d12e81a2..93da2d8379b1 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -66,6 +66,7 @@ struct sm5502_type {
 	struct reg_data *reg_data;
 	unsigned int num_reg_data;
 
+	unsigned int otg_dev_type1;
 	int (*parse_irq)(struct sm5502_muic_info *info, int irq_type);
 };
 
@@ -97,6 +98,33 @@ static struct reg_data sm5502_reg_data[] = {
 	},
 };
 
+/* Default value of SM5504 register to bring up MUIC device. */
+static struct reg_data sm5504_reg_data[] = {
+	{
+		.reg = SM5502_REG_RESET,
+		.val = SM5502_REG_RESET_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_INTMASK1,
+		.val = SM5504_REG_INTM1_ATTACH_MASK
+			| SM5504_REG_INTM1_DETACH_MASK,
+		.invert = false,
+	}, {
+		.reg = SM5502_REG_INTMASK2,
+		.val = SM5504_REG_INTM2_RID_CHG_MASK
+			| SM5504_REG_INTM2_UVLO_MASK
+			| SM5504_REG_INTM2_POR_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_CONTROL,
+		.val = SM5502_REG_CONTROL_MANUAL_SW_MASK
+			| SM5504_REG_CONTROL_CHGTYP_MASK
+			| SM5504_REG_CONTROL_USBCHDEN_MASK
+			| SM5504_REG_CONTROL_ADC_EN_MASK,
+		.invert = true,
+	},
+};
+
 /* List of detectable cables */
 static const unsigned int sm5502_extcon_cable[] = {
 	EXTCON_USB,
@@ -205,6 +233,55 @@ static const struct regmap_irq_chip sm5502_muic_irq_chip = {
 	.num_irqs		= ARRAY_SIZE(sm5502_irqs),
 };
 
+/* List of supported interrupt for SM5504 */
+static struct muic_irq sm5504_muic_irqs[] = {
+	{ SM5504_IRQ_INT1_ATTACH,	"muic-attach" },
+	{ SM5504_IRQ_INT1_DETACH,	"muic-detach" },
+	{ SM5504_IRQ_INT1_CHG_DET,	"muic-chg-det" },
+	{ SM5504_IRQ_INT1_DCD_OUT,	"muic-dcd-out" },
+	{ SM5504_IRQ_INT1_OVP_EVENT,	"muic-ovp-event" },
+	{ SM5504_IRQ_INT1_CONNECT,	"muic-connect" },
+	{ SM5504_IRQ_INT1_ADC_CHG,	"muic-adc-chg" },
+	{ SM5504_IRQ_INT2_RID_CHG,	"muic-rid-chg" },
+	{ SM5504_IRQ_INT2_UVLO,		"muic-uvlo" },
+	{ SM5504_IRQ_INT2_POR,		"muic-por" },
+	{ SM5504_IRQ_INT2_OVP_FET,	"muic-ovp-fet" },
+	{ SM5504_IRQ_INT2_OCP_LATCH,	"muic-ocp-latch" },
+	{ SM5504_IRQ_INT2_OCP_EVENT,	"muic-ocp-event" },
+	{ SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" },
+};
+
+/* Define interrupt list of SM5504 to register regmap_irq */
+static const struct regmap_irq sm5504_irqs[] = {
+	/* INT1 interrupts */
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, },
+
+	/* INT2 interrupts */
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,},
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, },
+};
+
+static const struct regmap_irq_chip sm5504_muic_irq_chip = {
+	.name			= "sm5504",
+	.status_base		= SM5502_REG_INT1,
+	.mask_base		= SM5502_REG_INTMASK1,
+	.mask_invert		= false,
+	.num_regs		= 2,
+	.irqs			= sm5504_irqs,
+	.num_irqs		= ARRAY_SIZE(sm5504_irqs),
+};
+
 /* Define regmap configuration of SM5502 for I2C communication  */
 static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
 {
@@ -308,11 +385,9 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 			return ret;
 		}
 
-		switch (dev_type1) {
-		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+		if (dev_type1 == info->type->otg_dev_type1) {
 			cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
-			break;
-		default:
+		} else {
 			dev_dbg(info->dev,
 				"cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
 				adc, dev_type1);
@@ -365,6 +440,11 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 			return ret;
 		}
 
+		if (dev_type1 == info->type->otg_dev_type1) {
+			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
+			break;
+		}
+
 		switch (dev_type1) {
 		case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
 			cable_type = SM5502_MUIC_ADC_OPEN_USB;
@@ -372,9 +452,6 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 		case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
 			cable_type = SM5502_MUIC_ADC_OPEN_TA;
 			break;
-		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
-			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
-			break;
 		default:
 			dev_dbg(info->dev,
 				"cannot identify the cable type: adc(0x%x)\n",
@@ -504,6 +581,34 @@ static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
 	return 0;
 }
 
+static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+	switch (irq_type) {
+	case SM5504_IRQ_INT1_ATTACH:
+		info->irq_attach = true;
+		break;
+	case SM5504_IRQ_INT1_DETACH:
+		info->irq_detach = true;
+		break;
+	case SM5504_IRQ_INT1_CHG_DET:
+	case SM5504_IRQ_INT1_DCD_OUT:
+	case SM5504_IRQ_INT1_OVP_EVENT:
+	case SM5504_IRQ_INT1_CONNECT:
+	case SM5504_IRQ_INT1_ADC_CHG:
+	case SM5504_IRQ_INT2_RID_CHG:
+	case SM5504_IRQ_INT2_UVLO:
+	case SM5504_IRQ_INT2_POR:
+	case SM5504_IRQ_INT2_OVP_FET:
+	case SM5504_IRQ_INT2_OCP_LATCH:
+	case SM5504_IRQ_INT2_OCP_EVENT:
+	case SM5504_IRQ_INT2_OVP_OCP_EVENT:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
 {
 	struct sm5502_muic_info *info = data;
@@ -676,11 +781,23 @@ static const struct sm5502_type sm5502_data = {
 	.irq_chip = &sm5502_muic_irq_chip,
 	.reg_data = sm5502_reg_data,
 	.num_reg_data = ARRAY_SIZE(sm5502_reg_data),
+	.otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK,
 	.parse_irq = sm5502_parse_irq,
 };
 
+static const struct sm5502_type sm5504_data = {
+	.muic_irqs = sm5504_muic_irqs,
+	.num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs),
+	.irq_chip = &sm5504_muic_irq_chip,
+	.reg_data = sm5504_reg_data,
+	.num_reg_data = ARRAY_SIZE(sm5504_reg_data),
+	.otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK,
+	.parse_irq = sm5504_parse_irq,
+};
+
 static const struct of_device_id sm5502_dt_match[] = {
 	{ .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data },
+	{ .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sm5502_dt_match);
@@ -712,6 +829,7 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
 
 static const struct i2c_device_id sm5502_i2c_id[] = {
 	{ "sm5502", (kernel_ulong_t)&sm5502_data },
+	{ "sm5504", (kernel_ulong_t)&sm5504_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
diff --git a/drivers/extcon/extcon-sm5502.h b/drivers/extcon/extcon-sm5502.h
index d187205df7b3..9c04315d48e2 100644
--- a/drivers/extcon/extcon-sm5502.h
+++ b/drivers/extcon/extcon-sm5502.h
@@ -89,6 +89,13 @@ enum sm5502_reg {
 #define SM5502_REG_CONTROL_RAW_DATA_MASK	(0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT)
 #define SM5502_REG_CONTROL_SW_OPEN_MASK		(0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT)
 
+#define SM5504_REG_CONTROL_CHGTYP_SHIFT		5
+#define SM5504_REG_CONTROL_USBCHDEN_SHIFT	6
+#define SM5504_REG_CONTROL_ADC_EN_SHIFT		7
+#define SM5504_REG_CONTROL_CHGTYP_MASK		(0x1 << SM5504_REG_CONTROL_CHGTYP_SHIFT)
+#define SM5504_REG_CONTROL_USBCHDEN_MASK	(0x1 << SM5504_REG_CONTROL_USBCHDEN_SHIFT)
+#define SM5504_REG_CONTROL_ADC_EN_MASK		(0x1 << SM5504_REG_CONTROL_ADC_EN_SHIFT)
+
 #define SM5502_REG_INTM1_ATTACH_SHIFT		0
 #define SM5502_REG_INTM1_DETACH_SHIFT		1
 #define SM5502_REG_INTM1_KP_SHIFT		2
@@ -119,6 +126,36 @@ enum sm5502_reg {
 #define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK	(0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT)
 #define SM5502_REG_INTM2_MHL_MASK		(0x1 << SM5502_REG_INTM2_MHL_SHIFT)
 
+#define SM5504_REG_INTM1_ATTACH_SHIFT		0
+#define SM5504_REG_INTM1_DETACH_SHIFT		1
+#define SM5504_REG_INTM1_CHG_DET_SHIFT		2
+#define SM5504_REG_INTM1_DCD_OUT_SHIFT		3
+#define SM5504_REG_INTM1_OVP_EVENT_SHIFT	4
+#define SM5504_REG_INTM1_CONNECT_SHIFT		5
+#define SM5504_REG_INTM1_ADC_CHG_SHIFT		6
+#define SM5504_REG_INTM1_ATTACH_MASK		(0x1 << SM5504_REG_INTM1_ATTACH_SHIFT)
+#define SM5504_REG_INTM1_DETACH_MASK		(0x1 << SM5504_REG_INTM1_DETACH_SHIFT)
+#define SM5504_REG_INTM1_CHG_DET_MASK		(0x1 << SM5504_REG_INTM1_CHG_DET_SHIFT)
+#define SM5504_REG_INTM1_DCD_OUT_MASK		(0x1 << SM5504_REG_INTM1_DCD_OUT_SHIFT)
+#define SM5504_REG_INTM1_OVP_EVENT_MASK		(0x1 << SM5504_REG_INTM1_OVP_EVENT_SHIFT)
+#define SM5504_REG_INTM1_CONNECT_MASK		(0x1 << SM5504_REG_INTM1_CONNECT_SHIFT)
+#define SM5504_REG_INTM1_ADC_CHG_MASK		(0x1 << SM5504_REG_INTM1_ADC_CHG_SHIFT)
+
+#define SM5504_REG_INTM2_RID_CHG_SHIFT		0
+#define SM5504_REG_INTM2_UVLO_SHIFT		1
+#define SM5504_REG_INTM2_POR_SHIFT		2
+#define SM5504_REG_INTM2_OVP_FET_SHIFT		4
+#define SM5504_REG_INTM2_OCP_LATCH_SHIFT	5
+#define SM5504_REG_INTM2_OCP_EVENT_SHIFT	6
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT	7
+#define SM5504_REG_INTM2_RID_CHG_MASK		(0x1 << SM5504_REG_INTM2_RID_CHG_SHIFT)
+#define SM5504_REG_INTM2_UVLO_MASK		(0x1 << SM5504_REG_INTM2_UVLO_SHIFT)
+#define SM5504_REG_INTM2_POR_MASK		(0x1 << SM5504_REG_INTM2_POR_SHIFT)
+#define SM5504_REG_INTM2_OVP_FET_MASK		(0x1 << SM5504_REG_INTM2_OVP_FET_SHIFT)
+#define SM5504_REG_INTM2_OCP_LATCH_MASK		(0x1 << SM5504_REG_INTM2_OCP_LATCH_SHIFT)
+#define SM5504_REG_INTM2_OCP_EVENT_MASK		(0x1 << SM5504_REG_INTM2_OCP_EVENT_SHIFT)
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_MASK	(0x1 << SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT)
+
 #define SM5502_REG_ADC_SHIFT			0
 #define SM5502_REG_ADC_MASK			(0x1f << SM5502_REG_ADC_SHIFT)
 
@@ -195,6 +232,9 @@ enum sm5502_reg {
 #define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK		(0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT)
 #define SM5502_REG_DEV_TYPE1_USB_OTG_MASK		(0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT)
 
+#define SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT		0
+#define SM5504_REG_DEV_TYPE1_USB_OTG_MASK		(0x1 << SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT)
+
 #define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT		0
 #define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT		1
 #define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT		2
@@ -273,4 +313,42 @@ enum sm5502_irq {
 #define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK	BIT(4)
 #define SM5502_IRQ_INT2_MHL_MASK		BIT(5)
 
+/* SM5504 Interrupts */
+enum sm5504_irq {
+	/* INT1 */
+	SM5504_IRQ_INT1_ATTACH,
+	SM5504_IRQ_INT1_DETACH,
+	SM5504_IRQ_INT1_CHG_DET,
+	SM5504_IRQ_INT1_DCD_OUT,
+	SM5504_IRQ_INT1_OVP_EVENT,
+	SM5504_IRQ_INT1_CONNECT,
+	SM5504_IRQ_INT1_ADC_CHG,
+
+	/* INT2 */
+	SM5504_IRQ_INT2_RID_CHG,
+	SM5504_IRQ_INT2_UVLO,
+	SM5504_IRQ_INT2_POR,
+	SM5504_IRQ_INT2_OVP_FET,
+	SM5504_IRQ_INT2_OCP_LATCH,
+	SM5504_IRQ_INT2_OCP_EVENT,
+	SM5504_IRQ_INT2_OVP_OCP_EVENT,
+
+	SM5504_IRQ_NUM,
+};
+
+#define SM5504_IRQ_INT1_ATTACH_MASK		BIT(0)
+#define SM5504_IRQ_INT1_DETACH_MASK		BIT(1)
+#define SM5504_IRQ_INT1_CHG_DET_MASK		BIT(2)
+#define SM5504_IRQ_INT1_DCD_OUT_MASK		BIT(3)
+#define SM5504_IRQ_INT1_OVP_MASK		BIT(4)
+#define SM5504_IRQ_INT1_CONNECT_MASK		BIT(5)
+#define SM5504_IRQ_INT1_ADC_CHG_MASK		BIT(6)
+#define SM5504_IRQ_INT2_RID_CHG_MASK		BIT(0)
+#define SM5504_IRQ_INT2_UVLO_MASK		BIT(1)
+#define SM5504_IRQ_INT2_POR_MASK		BIT(2)
+#define SM5504_IRQ_INT2_OVP_FET_MASK		BIT(4)
+#define SM5504_IRQ_INT2_OCP_LATCH_MASK		BIT(5)
+#define SM5504_IRQ_INT2_OCP_EVENT_MASK		BIT(6)
+#define SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK	BIT(7)
+
 #endif /*  __LINUX_EXTCON_SM5502_H */
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v4 0/3] extcon: sm5502: Add support for SM5504
  2021-06-03  8:52 ` [PATCH v4 0/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
                     ` (2 preceding siblings ...)
  2021-06-03  8:52   ` [PATCH v4 3/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
@ 2021-06-04  2:03   ` Chanwoo Choi
  3 siblings, 0 replies; 5+ messages in thread
From: Chanwoo Choi @ 2021-06-04  2:03 UTC (permalink / raw)
  To: Stephan Gerhold, MyungJoo Ham
  Cc: Rob Herring, devicetree, linux-kernel, Nikita Travkin,
	~postmarketos/upstreaming

On 6/3/21 5:52 PM, Stephan Gerhold wrote:
> This patch series adds support for SM5504 to the existing extcon-sm5502
> driver. SM5502 and SM5504 are fairly similar so support for SM5504 can
> be added with a few simple changes to the code.
> 
> I tested this patch series on both SM5502 (Samsung Galaxy A5 2015)
> and SM5504 (Samsung Galaxy S4 Mini Value Edition) and it seems to work
> just fine for both.
> 
> ---
> Changes in v4:
>   - Add NULL check for .parse_irq (suggested by Chanwoo Choi)
>   - Add Rob's Acked-by: on the dt-bindings patch
> Changes in v3:
>   - Drop patch 1-4 (already applied)
>   - Avoid if (type == TYPE_SM5504) everywhere in the code, instead
>     introduce a struct sm5502_type that encodes chip-specific information.
> Changes in v2: Fix compile warning in last patch
> 
> v3: https://lore.kernel.org/lkml/20210601200007.218802-1-stephan@gerhold.net/
> v2: https://lore.kernel.org/lkml/20210531133438.3511-1-stephan@gerhold.net/
> v1: https://lore.kernel.org/lkml/20210520112334.129556-1-stephan@gerhold.net/
> 
> Stephan Gerhold (3):
>   dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic
>   extcon: sm5502: Refactor driver to use chip-specific struct
>   extcon: sm5502: Add support for SM5504
> 
>  .../extcon/siliconmitus,sm5502-muic.yaml      |   6 +-
>  drivers/extcon/Kconfig                        |   2 +-
>  drivers/extcon/extcon-sm5502.c                | 200 +++++++++++++++---
>  drivers/extcon/extcon-sm5502.h                |  82 ++++++-
>  4 files changed, 252 insertions(+), 38 deletions(-)
> 

Applied them. Thanks.

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-06-04  1:44 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CGME20210603085249epcas1p29dd8274c475b84be071e257ecdd9d37a@epcas1p2.samsung.com>
2021-06-03  8:52 ` [PATCH v4 0/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
2021-06-03  8:52   ` [PATCH v4 1/3] dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic Stephan Gerhold
2021-06-03  8:52   ` [PATCH v4 2/3] extcon: sm5502: Refactor driver to use chip-specific struct Stephan Gerhold
2021-06-03  8:52   ` [PATCH v4 3/3] extcon: sm5502: Add support for SM5504 Stephan Gerhold
2021-06-04  2:03   ` [PATCH v4 0/3] " Chanwoo Choi

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.