All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: kvalo@codeaurora.org, wcn36xx@lists.infradead.org,
	linux-wireless@vger.kernel.org
Cc: bryan.odonoghue@linaro.org, shawn.guo@linaro.org,
	benl@squareup.com, loic.poulain@linaro.org,
	bjorn.andersson@linaro.org, kernel test robot <lkp@intel.com>
Subject: [PATCH v6 06/12] wcn36xx: Add ipv6 namespace offload in suspend
Date: Sat,  5 Jun 2021 02:11:34 +0100	[thread overview]
Message-ID: <20210605011140.2004643-7-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20210605011140.2004643-1-bryan.odonoghue@linaro.org>

We need to respond to ipv6 namespace lookups when in suspend. This patch
adds the necessary changes to issue the appropriate firmware command on
suspend and resume to enter/exit firmware offloaded ns lookup.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Benjamin Li <benl@squareup.com>
---
 drivers/net/wireless/ath/wcn36xx/hal.h  |  3 ++
 drivers/net/wireless/ath/wcn36xx/main.c |  4 ++
 drivers/net/wireless/ath/wcn36xx/smd.c  | 63 +++++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/smd.h  |  3 ++
 4 files changed, 73 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 90333daed845..3b949b0b3792 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -3464,6 +3464,9 @@ struct wcn36xx_hal_rem_bcn_filter_req {
 #define WCN36XX_HAL_OFFLOAD_DISABLE                         0
 #define WCN36XX_HAL_OFFLOAD_ENABLE                          1
 #define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE             0x2
+#define WCN36XX_HAL_OFFLOAD_MCAST_FILTER_ENABLE             0x4
+#define WCN36XX_HAL_OFFLOAD_NS_AND_MCAST_FILTER_ENABLE	\
+	(WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_MCAST_FILTER_ENABLE)
 #define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE	\
 	(WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE)
 #define WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX		0x02
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 240ecdd52f81..09e22f829682 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1116,6 +1116,9 @@ static int wcn36xx_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wow)
 	vif = wcn36xx_get_first_assoc_vif(wcn);
 	if (vif) {
 		ret = wcn36xx_smd_arp_offload(wcn, vif, true);
+		if (ret)
+			goto out;
+		ret = wcn36xx_smd_ipv6_ns_offload(wcn, vif, true);
 		if (ret)
 			goto out;
 		ret = wcn36xx_smd_set_power_params(wcn, true);
@@ -1136,6 +1139,7 @@ static int wcn36xx_resume(struct ieee80211_hw *hw)
 	vif = wcn36xx_get_first_assoc_vif(wcn);
 	if (vif) {
 		wcn36xx_smd_set_power_params(wcn, false);
+		wcn36xx_smd_ipv6_ns_offload(wcn, vif, false);
 		wcn36xx_smd_arp_offload(wcn, vif, false);
 	}
 	mutex_unlock(&wcn->conf_mutex);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 478e363610e1..4a50e5f8456a 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2793,6 +2793,69 @@ int wcn36xx_smd_arp_offload(struct wcn36xx *wcn, struct ieee80211_vif *vif,
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
+int wcn36xx_smd_ipv6_ns_offload(struct wcn36xx *wcn, struct ieee80211_vif *vif,
+				bool enable)
+{
+	struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
+	struct wcn36xx_hal_host_offload_req_msg msg_body;
+	struct wcn36xx_hal_ns_offload_params *ns_params;
+	struct wcn36xx_hal_host_offload_req *ho_params;
+	int ret;
+
+	mutex_lock(&wcn->hal_mutex);
+
+	INIT_HAL_MSG(msg_body, WCN36XX_HAL_HOST_OFFLOAD_REQ);
+	ho_params = &msg_body.host_offload_params;
+	ns_params = &msg_body.ns_offload_params;
+
+	ho_params->offload_type = WCN36XX_HAL_IPV6_NS_OFFLOAD;
+	if (enable) {
+		ho_params->enable =
+			WCN36XX_HAL_OFFLOAD_NS_AND_MCAST_FILTER_ENABLE;
+		if (vif_priv->num_target_ipv6_addrs) {
+			memcpy(&ho_params->u,
+			       &vif_priv->target_ipv6_addrs[0].in6_u,
+			       sizeof(struct in6_addr));
+			memcpy(&ns_params->target_ipv6_addr1,
+			       &vif_priv->target_ipv6_addrs[0].in6_u,
+			       sizeof(struct in6_addr));
+			ns_params->target_ipv6_addr1_valid = 1;
+		}
+		if (vif_priv->num_target_ipv6_addrs > 1) {
+			memcpy(&ns_params->target_ipv6_addr2,
+			       &vif_priv->target_ipv6_addrs[1].in6_u,
+			       sizeof(struct in6_addr));
+			ns_params->target_ipv6_addr2_valid = 1;
+		}
+	}
+	memcpy(&ns_params->self_addr, vif->addr, ETH_ALEN);
+	ns_params->bss_index = vif_priv->bss_index;
+
+	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
+
+	ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len);
+	if (ret) {
+		wcn36xx_err("Sending host_offload_arp failed\n");
+		goto out;
+	}
+	ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
+	if (ret) {
+		wcn36xx_err("host_offload_arp failed err=%d\n", ret);
+		goto out;
+	}
+out:
+	mutex_unlock(&wcn->hal_mutex);
+	return ret;
+}
+#else
+int wcn36xx_smd_ipv6_ns_offload(struct wcn36xx *wcn, struct ieee80211_vif *vif,
+				bool enable)
+{
+	return 0;
+}
+#endif
+
 int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
 			    void *buf, int len, void *priv, u32 addr)
 {
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 6492a628ea6a..e03ab7878432 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -150,4 +150,7 @@ int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
 int wcn36xx_smd_arp_offload(struct wcn36xx *wcn, struct ieee80211_vif *vif,
 			    bool enable);
 
+int wcn36xx_smd_ipv6_ns_offload(struct wcn36xx *wcn, struct ieee80211_vif *vif,
+				bool enable);
+
 #endif	/* _SMD_H_ */
-- 
2.30.1


  parent reply	other threads:[~2021-06-05  1:11 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-05  1:11 [PATCH v6 00/12] wcn36xx: Enable downstream consistent Wake on Lan Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 01/12] wcn36xx: Return result of set_power_params in suspend Bryan O'Donoghue
2021-06-14 15:18   ` Kalle Valo
2021-06-14 15:25     ` Kalle Valo
2021-06-14 15:36       ` Bryan O'Donoghue
2021-06-15  6:41         ` Kalle Valo
2021-06-05  1:11 ` [PATCH v6 02/12] wcn36xx: Run suspend for the first ieee80211_vif Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 03/12] wcn36xx: Add ipv4 ARP offload support in suspend Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 04/12] wcn36xx: Do not flush indication queue on suspend/resume Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 05/12] wcn36xx: Add ipv6 address tracking Bryan O'Donoghue
2021-06-05  1:11 ` Bryan O'Donoghue [this message]
2021-06-05  1:11 ` [PATCH v6 07/12] wcn36xx: Add set_rekey_data callback Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 08/12] wcn36xx: Add GTK offload to WoWLAN path Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 09/12] wcn36xx: Add GTK offload info to WoWLAN resume Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 10/12] wcn36xx: Add Host suspend indication support Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 11/12] wcn36xx: Add host resume request support Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 12/12] wcn36xx: Enable WOWLAN flags Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210605011140.2004643-7-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=benl@squareup.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lkp@intel.com \
    --cc=loic.poulain@linaro.org \
    --cc=shawn.guo@linaro.org \
    --cc=wcn36xx@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.