On Thu, Jun 10, 2021 at 03:39:35PM +0300, Camelia Groza wrote:

> From: Camelia Groza <camelia.groza@nxp.com>
> 
> The T2080RDB boards revision D and up have updated Aquantia PHYs on the
> two 10Gbps copper ports connected to MAC1 and MAC2 (from AQ1202 to
> AQR113C). The second PHY connected to MAC2 is located at a different
> address on the MDIO bus compared to revision C boards. Device tree
> fixups are required for both Linux and u-boot to set the correct PHY
> address for the new board revisions.
> 
> The first patch in the series implements a callback that detects the
> board revision based on the CPLD registers.
> 
> The second patch updates the PHY addresses in u-boot for the legacy,
> non-DM, driver implementation.

I'd much rather see DM_ETH migration completed and non-DM_ETH code
removed while someone is actively here again.  Thanks!

-- 
Tom