All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <uwe@kleine-koenig.org>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>
Cc: linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: rockchip: Add support for USB on helios64
Date: Fri, 11 Jun 2021 10:14:14 +0200	[thread overview]
Message-ID: <20210611081414.1448786-1-uwe@kleine-koenig.org> (raw)

This enables the USB hardware needed to access devices on the sockets J1
and J13.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
---
 .../dts/rockchip/rk3399-kobol-helios64.dts    | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 037dc5cdc3f3..c142649cd1bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -155,6 +155,20 @@ regulator-state-mem {
 		};
 	};
 
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -407,6 +421,12 @@ pmic_int_l: pmic-int-l {
 		};
 	};
 
+	power {
+		vcc5v0_usb_en: vcc5v0-usb-en {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vcc3v0-sd {
 		sdmmc0_pwr_h: sdmmc0-pwr-h {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -449,6 +469,30 @@ &sdmmc {
 	status = "okay";
 };
 
+&tcphy1 {
+	// phy for &usbdrd_dwc3_1
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	otg-port {
+		// phy for &usbdrd_dwc3_1
+		phy-supply = <&vcc5v0_usb>
+		status = "okay";
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&usbdrd3_1 {
+	status = "okay";
+
+	usb@fe900000 {
+		dr_mode = "host";
+		status = "okay";
+	};
+};
-- 
2.30.2


WARNING: multiple messages have this Message-ID
From: "Uwe Kleine-König" <uwe@kleine-koenig.org>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>
Cc: linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: rockchip: Add support for USB on helios64
Date: Fri, 11 Jun 2021 10:14:14 +0200	[thread overview]
Message-ID: <20210611081414.1448786-1-uwe@kleine-koenig.org> (raw)

This enables the USB hardware needed to access devices on the sockets J1
and J13.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
---
 .../dts/rockchip/rk3399-kobol-helios64.dts    | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 037dc5cdc3f3..c142649cd1bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -155,6 +155,20 @@ regulator-state-mem {
 		};
 	};
 
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -407,6 +421,12 @@ pmic_int_l: pmic-int-l {
 		};
 	};
 
+	power {
+		vcc5v0_usb_en: vcc5v0-usb-en {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vcc3v0-sd {
 		sdmmc0_pwr_h: sdmmc0-pwr-h {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -449,6 +469,30 @@ &sdmmc {
 	status = "okay";
 };
 
+&tcphy1 {
+	// phy for &usbdrd_dwc3_1
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	otg-port {
+		// phy for &usbdrd_dwc3_1
+		phy-supply = <&vcc5v0_usb>
+		status = "okay";
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&usbdrd3_1 {
+	status = "okay";
+
+	usb@fe900000 {
+		dr_mode = "host";
+		status = "okay";
+	};
+};
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID
From: "Uwe Kleine-König" <uwe@kleine-koenig.org>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>
Cc: linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: rockchip: Add support for USB on helios64
Date: Fri, 11 Jun 2021 10:14:14 +0200	[thread overview]
Message-ID: <20210611081414.1448786-1-uwe@kleine-koenig.org> (raw)

This enables the USB hardware needed to access devices on the sockets J1
and J13.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
---
 .../dts/rockchip/rk3399-kobol-helios64.dts    | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 037dc5cdc3f3..c142649cd1bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -155,6 +155,20 @@ regulator-state-mem {
 		};
 	};
 
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -407,6 +421,12 @@ pmic_int_l: pmic-int-l {
 		};
 	};
 
+	power {
+		vcc5v0_usb_en: vcc5v0-usb-en {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vcc3v0-sd {
 		sdmmc0_pwr_h: sdmmc0-pwr-h {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -449,6 +469,30 @@ &sdmmc {
 	status = "okay";
 };
 
+&tcphy1 {
+	// phy for &usbdrd_dwc3_1
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	otg-port {
+		// phy for &usbdrd_dwc3_1
+		phy-supply = <&vcc5v0_usb>
+		status = "okay";
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&usbdrd3_1 {
+	status = "okay";
+
+	usb@fe900000 {
+		dr_mode = "host";
+		status = "okay";
+	};
+};
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-06-11  8:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-11  8:14 Uwe Kleine-König [this message]
2021-06-13 16:27 ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210611081414.1448786-1-uwe@kleine-koenig.org \
    --to=uwe@kleine-koenig.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH] arm64: dts: rockchip: Add support for USB on helios64' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.