All of lore.kernel.org
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH 6/6] arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support
Date: Fri, 11 Jun 2021 14:46:42 +0100	[thread overview]
Message-ID: <20210611134642.24029-7-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20210611134642.24029-1-biju.das.jz@bp.renesas.com>

Add USB2.0 phy and host support to SoC DT.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
This patch depend on [1]
[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20210609153230.6967-11-prabhakar.mahadev-lad.rj@bp.renesas.com/
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 81 ++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 47f9fafd6c06..2ffdaed6c9a5 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -158,6 +158,87 @@
 			      <0x0 0x11940000 0 0x60000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
+
+		usbphyctrl: usbphyctrl@11c40000 {
+			compatible = "renesas,r9a07g044-usbphyctrl",
+				     "renesas,rzg2l-usbphyctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			#phy-cells = <1>;
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_USB0>;
+			resets = <&cpg R9A07G044_CLK_USB0>;
+			phys = <&usbphyctrl 0>, <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_USB1>;
+			resets = <&cpg R9A07G044_CLK_USB1>;
+			phys = <&usbphyctrl 1>, <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_USB0>;
+			resets = <&cpg R9A07G044_CLK_USB0>;
+			phys = <&usbphyctrl 0>, <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_USB1>;
+			resets = <&cpg R9A07G044_CLK_USB1>;
+			phys = <&usbphyctrl 1>, <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_USB0>;
+			resets = <&cpg R9A07G044_CLK_USB0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_USB1>;
+			resets = <&cpg R9A07G044_CLK_USB1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 
 	timer {
-- 
2.17.1


      parent reply	other threads:[~2021-06-11 13:47 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-11 13:46 [PATCH 0/6] Add RZ/G2L USB2.0 phy and host support Biju Das
2021-06-11 13:46 ` Biju Das
2021-06-11 13:46 ` [PATCH 1/6] dt-bindings: phy: renesas: Document RZ/G2L USB PHY Control bindings Biju Das
2021-06-11 13:46   ` Biju Das
2021-06-21  4:01   ` Vinod Koul
2021-06-21  4:01     ` Vinod Koul
2021-06-21  6:40     ` Biju Das
2021-06-21  6:40       ` Biju Das
2021-06-11 13:46 ` [PATCH 2/6] drivers: clk: renesas: r9a07g044-cpg: Add USB clocks Biju Das
2021-06-14 12:26   ` Geert Uytterhoeven
2021-06-15  8:58     ` Geert Uytterhoeven
2021-06-15  9:48       ` Laurent Pinchart
2021-06-15  9:53         ` Geert Uytterhoeven
2021-06-15  9:57           ` Laurent Pinchart
2021-06-15 10:24             ` Geert Uytterhoeven
2021-06-16 10:16               ` Biju Das
2021-06-16 11:33               ` Laurent Pinchart
2021-06-16 10:12       ` Biju Das
2021-06-11 13:46 ` [PATCH 3/6] phy: renesas: Add RZ/G2L usb phy control driver Biju Das
2021-06-11 13:46   ` Biju Das
2021-06-21  4:13   ` Vinod Koul
2021-06-21  4:13     ` Vinod Koul
2021-06-21  6:51     ` Biju Das
2021-06-21  6:51       ` Biju Das
2021-06-11 13:46 ` [PATCH 4/6] arm64: configs: defconfig: Enable RZ/G2L USB PHY " Biju Das
2021-06-11 13:46   ` Biju Das
2021-06-11 13:46 ` [PATCH 5/6] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings Biju Das
2021-06-11 13:46   ` [PATCH 5/6] dt-bindings: phy: renesas, usb2-phy: " Biju Das
2021-06-11 13:46 ` Biju Das [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210611134642.24029-7-biju.das.jz@bp.renesas.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=biju.das@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.