All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Woojung Huh <woojung.huh@microchip.com>,
	UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Russell King <linux@armlinux.org.uk>
Subject: [PATCH net-next v5 2/8] net: dsa: microchip: ksz8795: add phylink support
Date: Mon, 14 Jun 2021 06:31:19 +0200	[thread overview]
Message-ID: <20210614043125.11658-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210614043125.11658-1-o.rempel@pengutronix.de>

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch adds the phylink support to the ksz8795 driver to provide
configuration exceptions on quirky KSZ8863 and KSZ8873 ports.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/microchip/ksz8795.c | 55 +++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index ba065003623f..cfa2a5000cd3 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -18,6 +18,7 @@
 #include <linux/micrel_phy.h>
 #include <net/dsa.h>
 #include <net/switchdev.h>
+#include <linux/phylink.h>
 
 #include "ksz_common.h"
 #include "ksz8795_reg.h"
@@ -1420,11 +1421,65 @@ static int ksz8_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static void ksz8_validate(struct dsa_switch *ds, int port,
+			  unsigned long *supported,
+			  struct phylink_link_state *state)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+	struct ksz_device *dev = ds->priv;
+
+	if (port == dev->cpu_port) {
+		if (state->interface != PHY_INTERFACE_MODE_RMII &&
+		    state->interface != PHY_INTERFACE_MODE_MII &&
+		    state->interface != PHY_INTERFACE_MODE_NA)
+			goto unsupported;
+	} else {
+		if (state->interface != PHY_INTERFACE_MODE_INTERNAL &&
+		    state->interface != PHY_INTERFACE_MODE_NA)
+			goto unsupported;
+	}
+
+	/* Allow all the expected bits */
+	phylink_set_port_modes(mask);
+	phylink_set(mask, Autoneg);
+
+	/* Silicon Errata Sheet (DS80000830A):
+	 * "Port 1 does not respond to received flow control PAUSE frames"
+	 * So, disable Pause support on "Port 1" (port == 0) for all ksz88x3
+	 * switches.
+	 */
+	if (!ksz_is_ksz88x3(dev) || port)
+		phylink_set(mask, Pause);
+
+	/* Asym pause is not supported on KSZ8863 and KSZ8873 */
+	if (!ksz_is_ksz88x3(dev))
+		phylink_set(mask, Asym_Pause);
+
+	/* 10M and 100M are only supported */
+	phylink_set(mask, 10baseT_Half);
+	phylink_set(mask, 10baseT_Full);
+	phylink_set(mask, 100baseT_Half);
+	phylink_set(mask, 100baseT_Full);
+
+	bitmap_and(supported, supported, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(state->advertising, state->advertising, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+	return;
+
+unsupported:
+	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+	dev_err(ds->dev, "Unsupported interface: %s, port: %d\n",
+		phy_modes(state->interface), port);
+}
+
 static const struct dsa_switch_ops ksz8_switch_ops = {
 	.get_tag_protocol	= ksz8_get_tag_protocol,
 	.setup			= ksz8_setup,
 	.phy_read		= ksz_phy_read16,
 	.phy_write		= ksz_phy_write16,
+	.phylink_validate	= ksz8_validate,
 	.phylink_mac_link_down	= ksz_mac_link_down,
 	.port_enable		= ksz_enable_port,
 	.get_strings		= ksz8_get_strings,
-- 
2.29.2


  parent reply	other threads:[~2021-06-14  4:32 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-14  4:31 [PATCH net-next v5 0/8] provide cable test support for the ksz886x switch Oleksij Rempel
2021-06-14  4:31 ` [PATCH net-next v5 1/8] net: phy: micrel: move phy reg offsets to common header Oleksij Rempel
2021-06-14  4:31 ` Oleksij Rempel [this message]
2021-06-14  4:31 ` [PATCH net-next v5 3/8] net: phy: micrel: use consistent alignments Oleksij Rempel
2021-06-14  4:31 ` [PATCH net-next v5 4/8] net: phy/dsa micrel/ksz886x add MDI-X support Oleksij Rempel
2021-06-14  4:31 ` [PATCH net-next v5 5/8] net: phy: micrel: ksz8081 " Oleksij Rempel
2021-06-14  4:31 ` [PATCH net-next v5 6/8] net: dsa: microchip: ksz8795: add LINK_MD register support Oleksij Rempel
2021-06-14  4:31 ` [PATCH net-next v5 7/8] net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags Oleksij Rempel
2021-06-14  4:31 ` [PATCH net-next v5 8/8] net: phy: micrel: ksz886x/ksz8081: add cabletest support Oleksij Rempel
2021-06-14 20:00 ` [PATCH net-next v5 0/8] provide cable test support for the ksz886x switch patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210614043125.11658-3-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=m.grzeschik@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    --cc=woojung.huh@microchip.com \
    --subject='Re: [PATCH net-next v5 2/8] net: dsa: microchip: ksz8795: add phylink support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.