* [PATCH v2 2/3] dmaengine: qcom: gpi: Add SM8250 compatible
2021-06-14 23:56 [PATCH v2 1/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 Konrad Dybcio
@ 2021-06-14 23:56 ` Konrad Dybcio
2021-06-14 23:56 ` [PATCH v2 3/3] arm64: dts: qcom: sm8250: Add GPI DMA nodes Konrad Dybcio
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2021-06-14 23:56 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Vinod Koul, Rob Herring, linux-arm-msm, dmaengine, devicetree,
linux-kernel
SM8250 seems to work just fine, so add a shiny new compatible for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
drivers/dma/qcom/gpi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 43ac3ab23d4c..1a1b7d8458c9 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -2282,6 +2282,7 @@ static int gpi_probe(struct platform_device *pdev)
static const struct of_device_id gpi_of_match[] = {
{ .compatible = "qcom,sdm845-gpi-dma" },
{ .compatible = "qcom,sm8150-gpi-dma" },
+ { .compatible = "qcom,sm8250-gpi-dma" },
{ },
};
MODULE_DEVICE_TABLE(of, gpi_of_match);
--
2.32.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 3/3] arm64: dts: qcom: sm8250: Add GPI DMA nodes
2021-06-14 23:56 [PATCH v2 1/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 Konrad Dybcio
2021-06-14 23:56 ` [PATCH v2 2/3] dmaengine: qcom: gpi: Add SM8250 compatible Konrad Dybcio
@ 2021-06-14 23:56 ` Konrad Dybcio
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2021-06-14 23:56 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Vinod Koul, Rob Herring, linux-arm-msm, dmaengine, devicetree,
linux-kernel
Add and configure GPI DMA nodes to enable the way for peripherals to make
DMA transfers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v1:
- Use the right compatible :facepalm:
arch/arm64/boot/dts/qcom/sm8250.dtsi | 64 ++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d45b6aa6fd05..806973d6ba55 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
@@ -520,6 +521,26 @@ opp-120000000 {
};
};
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sm8250-gpi-dma";
+ reg = <0 0x00800000 0 0x70000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <10>;
+ dma-channel-mask = <0x3f>;
+ iommus = <&apps_smmu 0x76 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -715,6 +736,29 @@ spi19: spi@894000 {
};
};
+ gpi_dma0: dma-controller@900000 {
+ compatible = "qcom,sm8250-gpi-dma";
+ reg = <0 0x00900000 0 0x70000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <15>;
+ dma-channel-mask = <0x7ff>;
+ iommus = <&apps_smmu 0x5b6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x6000>;
@@ -962,6 +1006,26 @@ spi7: spi@99c000 {
};
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8250-gpi-dma";
+ reg = <0 0x00a00000 0 0x70000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <10>;
+ dma-channel-mask = <0x3f>;
+ iommus = <&apps_smmu 0x56 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
--
2.32.0
^ permalink raw reply related [flat|nested] 3+ messages in thread